Search Results

Search found 89159 results on 3567 pages for 'function pointerswww developerit com'.

Page 1805/3567 | < Previous Page | 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812  | Next Page >

  • php sorting a seriously multidimensional array...

    - by BigDogsBarking
    I'm trying to sort a multidimensional object, and, after looking on php.net and around here, I get that I should write a function that I can then call via usort. I'm having some trouble with the syntax. I haven't ever written something this complicated before, and trying to figure it out feels like a mindbender... I'm working with the array posted at the end of this post. I want to filter out duplicate [n] values. But, and this is the tricky part for me, I want to keep the [n] value that has the smallest [d] value. So, if I have (and this example is simplified, the real array is at the end of this post): Array ( [7777] => Array ( [0] => Array ( [n] => '12345' [d] => 1 ) [1] => Array ( [n] => '67890' [d] => 4 ) ) [8888] => Array ( [2] => Array ( [n] => '12345' [d] => 10 ) [3] => Array ( [n] => '67890' [d] => 2 ) ) ) I want to filter out duplicate [n] values based on the [d] value, so that I wind up with this: Array ( [7777] => Array ( [0] => Array ( [n] => '12345' [d] => 1 ) ) [8888] => Array [3] => Array ( [n] => '67890' [d] => 2 ) ) ) I've tried writing different variations of the function cmp example posted on php.net, but I haven't been able to get any to work, and I think it's because I'm not altogether clear on how to traverse it using their example... I tried: function cmp($a, $b) { if($a['n'] == $b['n']) { if($a['d'] == $b['d']) { return 0; } } return ($a['n'] < $b['n']) ? -1 : 1; } But, that really did not work at all... Anyway, here's the real array I'm trying to work with... Help is greatly appreciated! Array ( [32112] => Array ( [0] => Array ( [n] => '02124' [d] => '0' ) [1] => Array ( [n] => '02124' [d] => '0.240101905123744' ) [2] => Array ( [n] => '11050' [d] => '0.441758632682761' ) [3] => Array ( [n] => '02186' [d] => '0.317514080260304' ) ) [43434] => Array ( [4] => Array ( [n] => '02124' [d] => '5.89936971664429e-05' ) [5] => Array ( [n] => '02124' [d] => '0.145859264792549' ) [6] => Array ( [n] => '11050' [d] => '0.327864593457739' ) [7] => Array ( [n] => '11050' [d] => '0.312135345168295' ) ) )

    Read the article

  • Hibernate - H2 db -- Could not parse mapping document from resource

    - by user1849757
    * Each of below files are in same location * Error : SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder". SLF4J: Defaulting to no-operation (NOP) logger implementation SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details. org.hibernate.InvalidMappingException: Could not parse mapping document from resource ./employee.hbm.xml at org.hibernate.cfg.Configuration.addResource(Configuration.java:616) at org.hibernate.cfg.Configuration.parseMappingElement(Configuration.java:1635) at org.hibernate.cfg.Configuration.parseSessionFactory(Configuration.java:1603) at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1582) at org.hibernate.cfg.Configuration.doConfigure(Configuration.java:1556) at org.hibernate.cfg.Configuration.configure(Configuration.java:1476) at org.hibernate.cfg.Configuration.configure(Configuration.java:1462) at com.yahoo.hibernatelearning.FirstExample.main(FirstExample.java:19) Caused by: org.hibernate.InvalidMappingException: Could not parse mapping document from input stream at org.hibernate.cfg.Configuration.addInputStream(Configuration.java:555) at org.hibernate.cfg.Configuration.addResource(Configuration.java:613) ... 7 more Caused by: org.dom4j.DocumentException: http://hibernate.sourceforge.net/%0Ahibernate-mapping-3.0.dtd Nested exception: http://hibernate.sourceforge.net/%0Ahibernate-mapping-3.0.dtd at org.dom4j.io.SAXReader.read(SAXReader.java:484) at org.hibernate.cfg.Configuration.addInputStream(Configuration.java:546) ... 8 more Exception in thread "main" java.lang.NullPointerException at com.yahoo.hibernatelearning.FirstExample.main(FirstExample.java:33) Hibernate Config: hibernate.cfg.xml <?xml version='1.0' encoding='utf-8'?> <!DOCTYPE hibernate-configuration PUBLIC "-//Hibernate/Hibernate Configuration DTD//EN" "http://hibernate.sourceforge.net/hibernate-configuration-3.0.dtd"> <hibernate-configuration> <session-factory> <property name="hibernate.connection.driver_class">org.h2.Driver</property> <property name="hibernate.connection.url">jdbc:h2:./db/repository</property> <property name="hibernate.connection.username">sa</property> <property name="hibernate.connection.password"></property> <property name="hibernate.default_schema">PUBLIC</property> <property name="hibernate.dialect">org.hibernate.dialect.H2Dialect</property> <property name="hibernate.show_sql">true</property> <property name="hibernate.hbm2ddl.auto">update</property> <!-- Mapping files --> <mapping resource="./employee.hbm.xml"/> </session-factory> </hibernate-configuration> Mapping Config: employee.hbm.xml <?xml version="1.0"?> <!DOCTYPE hibernate-mapping PUBLIC "-//Hibernate/Hibernate Mapping DTD 3.0//EN" "http://hibernate.sourceforge.net/ hibernate-mapping-3.0.dtd"> <hibernate-mapping> <class name="com.yahoo.hibernatelearning.Employee" table="employee"> <id name="empId" type="int" column="emp_id" > <generator class="native"/> </id> <property name="empName"> <column name="emp_name" /> </property> <property name="empSal"> <column name="emp_sal" /> </property> </class> </hibernate-mapping>

    Read the article

  • Yet another bug of JSF?

    - by Nitesh Panchal
    Hello, Again i see that the @PostConstruct is firing every time even though no binding attribute is used. See this code :- <?xml version='1.0' encoding='UTF-8' ?> <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml" xmlns:h="http://java.sun.com/jsf/html" xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:c="http://java.sun.com/jsp/jstl/core"> <h:head> <title>Facelet Title</title> </h:head> <h:body> <h:form> <c:forEach var="item" items="#{TestBean.listItems}"> <h:outputText value="#{item}"/> </c:forEach> <h:commandButton value="Click" actionListener="#{TestBean.actionListener}"/> </h:form> </h:body> </html> And this is the simplest possible bean in JSF :- package managedBeans; import java.io.Serializable; import java.util.ArrayList; import java.util.List; import javax.annotation.PostConstruct; import javax.faces.bean.ManagedBean; import javax.faces.bean.ViewScoped; @ManagedBean(name="TestBean") @ViewScoped public class TestBean implements Serializable { private List<String> listItems; public List<String> getListItems() { return listItems; } public void setListItems(List<String> listItems) { this.listItems = listItems; } public TestBean() { } @PostConstruct public void init(){ System.out.println("Post Construct fired!"); listItems = new ArrayList<String>(); listItems.add("Mango"); listItems.add("Apple"); listItems.add("Banana"); } public void actionListener(){ System.out.println("Action Listener fired!"); } } Do you see any behaviour that should cause postconstruct callback to fire each time? I think JSF 2.0 is highly unstable. If it has to fire PostConstruct each and every time what purpose does @ViewScoped serve. Why not to use @RequestScoped only? I thought i have made some mistake in my application. But when i created this simplest possible in JSF, i still get this error. Am i not understanding the scopes of JSF? or are they not testing it properly? Further, if you remove c:forEach and replace it with ui:repeat, then it works fine. Waiting for replies to confirm whether it is bug or it is intentional to stop the programmers from using jstl?

    Read the article

  • Var null and not an object when using document.getElementById

    - by Dean
    Hi, I'm doing some work in HTML and JQuery. I have a problem of my textarea and submit button not appearing after the radio button is selected. My HTML looks like this: <html> <head><title>Publications Database | Which spotlight for Publications</title> <script type="text/javascript" src="./jquery.js"></script> <script src="./addSpotlight.js" type="text/javascript" charset="utf-8"></script> </head> <body> <div class="wrapper"> <div class="header"> <div class="headerText">Which spotlight for Publications</div> </div> <div class="mainContent"> <p>Please select the publication that you would like to make the spotlight of this month:</p> <form action="addSpotlight" method="POST" id="form" name="form"> <div class="div29" id="div29"><input type="radio" value="29" name="publicationIDs" >A System For Dynamic Server Allocation in Application Server Clusters, IEEE International Symposium on Parallel and Distributed Processsing with Applications, 2008 </div> <div class="div30" id="div30"><input type="radio" value="30" name="publicationIDs" >Analysing BitTorrent's Seeding Strategies, 7th IEEE/IFIP International Conference on Embedded and Ubiquitous Computing (EUC-09), 2009 </div> <div class="div31" id="div31"><input type="radio" value="31" name="publicationIDs" >The Effect of Server Reallocation Time in Dynamic Resource Allocation, UK Performance Engineering Workshop 2009, 2009 </div> <div class="div32" id="div32"><input type="radio" value="32" name="publicationIDs" >idk, hello, 1992 </div> <div class="div33" id="div33"><input type="radio" value="33" name="publicationIDs" >sad, safg, 1992 </div> <div class="abstractWriteup" id="abstractWriteup"><textarea name="abstract"></textarea> <input type="submit" value="Add Spotlight"></div> </form> </div> </div> </body> </html> My javascript looks like this: $(document).ready( function() { $('.abstractWriteup').hide(); addAbstract(); }); function addAbstract() { var abstractWU = document.getElementById('.abstractWriteup'); $("input[name='publicationIDs']").change(function() { var abstractWU = document.getElementById('.abstractWriteup'); var classNameOfSelected = $("input[name='publicationIDs']").val(); var radioSelected = document.getElementById("div"+classNameOfSelected); var parentDiv = radioSelected.parentNode; parentDiv.insertBefore(radioSelected, abstractWU.nextSibling); $('.abstractWriteup').show(); });}; I have developed this by using Node#insertBefore. When I have had it working it has been rearranging the radio buttons. Thanks in Advance Dean

    Read the article

  • How to log out from the Facebook in windows phone 7 using facebook api?

    - by Vijay
    I am trying to add Facebook into my application. I have try with a sample. public class FacebookLoginPageViewModel { private static WebBrowser _webBrowser; private Page _page; private const string ExtendedPermissions = "user_about_me,read_stream,publish_stream,user_birthday,offline_access,email"; private readonly FacebookClient _fb = new FacebookClient(); private const string AppId = "1XXX58XXXXXXXX9"; Uri url; public FacebookLoginPageViewModel(Panel container, Page page) { _page = page; _webBrowser = new WebBrowser(); var loginUrl = GetFacebookLoginUrl(AppId, ExtendedPermissions); url = loginUrl; container.Children.Add(_webBrowser); _webBrowser.Navigated += webBrowser_Navigated; _webBrowser.Navigate(loginUrl); } private Uri GetFacebookLoginUrl(string appId, string extendedPermissions) { var parameters = new Dictionary<string, object>(); parameters["client_id"] = appId; parameters["redirect_uri"] = "https://www.facebook.com/connect/login_success.html"; parameters["response_type"] = "token"; parameters["display"] = "touch"; // add the 'scope' only if we have extendedPermissions. if (!string.IsNullOrEmpty(extendedPermissions)) { // A comma-delimited list of permissions parameters["scope"] = extendedPermissions; } return _fb.GetLoginUrl(parameters); } void webBrowser_Navigated(object sender, System.Windows.Navigation.NavigationEventArgs e) { FacebookOAuthResult oauthResult; if (!_fb.TryParseOAuthCallbackUrl(e.Uri, out oauthResult)) { return; } if (oauthResult.IsSuccess) { var accessToken = oauthResult.AccessToken; LoginSucceded(accessToken); } else { // user cancelled MessageBox.Show(oauthResult.ErrorDescription); } } private void LoginSucceded(string accessToken) { var fb = new FacebookClient(accessToken); fb.GetCompleted += (o, e) => { if (e.Error != null) { Deployment.Current.Dispatcher.BeginInvoke(() => { MessageBox.Show(e.Error.Message); return; }); } var result = (IDictionary<string, object>)e.GetResultData(); var id = (string)result["id"]; var url = string.Format("/Views/FacebookInfoPage.xaml?access_token={0}&id={1}", accessToken, id); var rootFrame = (App.Current as App).RootFrame; Deployment.Current.Dispatcher.BeginInvoke(() => { rootFrame.Navigate(new Uri(url, UriKind.Relative)); }); }; fb.GetAsync("me?fields=id"); } This is working fine. But i want to Log out from the facebook when i click log out. How to achieve this? I have try with some examples. But it is not working for me. private void logout(object sender, RoutedEventArgs e) { webBrowser1.Navigated += new EventHandler<System.Windows.Navigation.NavigationEventArgs>(CheckForout); webBrowser1.Navigate(new Uri("http://m.facebook.com/logout.php?confirm=1")); webBrowser1.Visibility = Visibility.Visible; } private void CheckForout(object sender, System.Windows.Navigation.NavigationEventArgs e) { string fbLogoutDoc = webBrowser1.SaveToString(); Regex regex = new Regex ("\\<a href=\\\"/logout(.*)\\\".*data-sigil=\\\"logout\\\""); MatchCollection matches = regex.Matches(fbLogoutDoc); if (matches.Count > 0) { string finalLogout = string.Format("http://m.facebook.com/logout{0}", matches[0].Groups[1].ToString().Replace("amp;", "")); webBrowser1.Navigate(new Uri(finalLogout)); } } Please let me any idea to resolve this problem.

    Read the article

  • Javascript phsyics in a 2d space

    - by eroo
    So, I am working on teaching myself Canvas (HTML5) and have most of a simple game engine coded up. It is a 2d representation of a space scene (planets, stars, celestial bodies, etc). My default "Sprite" class has a frame listener like such: "baseClass" contains a function that allows inheritance and applies "a" to "this.a". So, "var aTest = new Sprite({foo: 'bar'});" would make "aTest.foo = 'bar'". This is how I expose my objects to each other. { Sprite = baseClass.extend({ init: function(a){ baseClass.init(this, a); this.fields = new Array(); // list of fields of gravity one is in. Not sure if this is a good idea. this.addFL(function(tick){ // this will change to be independent of framerate soon. // and this is where I need help // gobjs is an array of all the Sprite objects in the "world". for(i = 0; i < gobjs.length; i++){ // Make sure its got setup correctly, make sure it -wants- gravity, and make sure it's not -this- sprite. if(typeof(gobjs[i].a) != undefined && !gobjs[i].a.ignoreGravity && gobjs[i].id != this.id){ // Check if it's within a certain range (obviously, gravity doesn't work this way... But I plan on having a large "space" area, // And I can't very well have all objects accounted for at all times, can I? if(this.distanceTo(gobjs[i]) < this.s.size*10 && gobjs[i].fields.indexOf(this.id) == -1){ gobjs[i].fields.push(this.id); } } } for(i = 0; i < this.fields.length; i++){ distance = this.distanceTo(gobjs[this.fields[i]]); angletosun = this.angleTo(gobjs[this.fields[i]])*(180/Math.PI); // .angleTo works very well, returning the angle in radians, which I convert to degrees here. // I have no idea what should happen here, although through trial and error (and attempting to read Maths papers on gravity (eeeeek!)), this sort of mimics gravity. // angle is its orientation, currently I assign a constant velocity to one of my objects, and leave the other static (it ignores gravity, but still emits it). this.a.angle = angletosun+(75+(distance*-1)/5); //todo: omg learn math if(this.distanceTo(gobjs[this.fields[i]]) > gobjs[this.fields[i]].a.size*10) this.fields.splice(i); // out of range, stop effecting. } }); } }); } Thanks in advance. The real trick is that one line: { this.a.angle = angletosun+(75+(distance*-1)/5); } This is more a physics question than Javascript, but I've searched and searched and read way to many wiki articles on orbital mathematics. It gets over my head very quickly. Edit: There is a weirdness with the SO formatting; forgives me, I is noobie.

    Read the article

  • Magento Onepage Success Conversion Tracking Design Pattern

    - by user1734954
    My intent is to track conversions through multiple channels by inserting third party javascript (for example google analytics, optimizely, pricegrabber etc.) into the footer of onepage success . I've accomplished this by adding a block to the footer reference inside of the checkout success node within local.xml and everything works appropriately. My questions are more about efficiency and extensibility. It occurred to me that it would be better to combine all of the blocks into a single block reference and then use a various methods acting on a single call to the various related models to provide the data needed for insertion into the javascript for each of the conversion tracking scripts. Some examples of the common data that conversion tracking may rely on(pseudo): Order ID , Order Total, Order.LineItem.Name(foreach) and so on Currently for each of the scripts I've made a call to the appropriate model passing the customers last order id as the load value and the calling a get() assigning the return value to a variable and then iterating through the data to match the values with the expectations of the given third party service. All of the data should be pulled once when checkout is complete each third party services may expect different data in different formats Here is an example of one of the conversion tracking template files which loads at the footer of checkout success. $order = Mage::getModel('sales/order')->loadByIncrementId(Mage::getSingleton('checkout/session')->getLastRealOrderId()); $amount = number_format($order->getGrandTotal(),2); $customer = Mage::helper('customer')->getCustomer()->getData(); ?> <script type="text/javascript"> popup_email = '<?php echo($customer['email']);?>'; popup_order_number = '<?php echo $this->getOrderId() ?>'; </script> <!-- PriceGrabber Merchant Evaluation Code --> <script type="text/javascript" charset="UTF-8" src="https://www.pricegrabber.com/rating_merchrevpopjs.php?retid=<something>"></script> <noscript><a href="http://www.pricegrabber.com/rating_merchrev.php?retid=<something>" target=_blank> <img src="https://images.pricegrabber.com/images/mr_noprize.jpg" border="0" width="272" height="238" alt="Merchant Evaluation"></a></noscript> <!-- End PriceGrabber Code --> Having just a single piece of code like this is not that big of a deal, but we are doing similar things with a number of different third party services. Pricegrabber is one of the simpler examples. A more sophisticated tracking service expects a comma separated list of all of the product names, ids, prices, categories , order id etc. I would like to make it all more manageable so my idea to do the following: combine all of the template files into a single file Develop a helper class or library to deliver the data to the conversion template Goals Include Extensibility Minimal Model Calls Minimal Method Calls The Questions 1. Is a Mage helper the best route to take? 2. Is there any design pattern you may recommend for the "helper" class? 3. Why would this the design pattern you've chosen be best for this instance?

    Read the article

  • Is asp.net caching my sql results?

    - by Christian W
    I have the following method in an App_Code/Globals.cs file: public static XmlDataSource getXmlSourceFromOrgid(int orgid) { XmlDataSource xds = new XmlDataSource(); var ctx = new SensusDataContext(); SqlConnection c = new SqlConnection(ctx.Connection.ConnectionString); c.Open(); SqlCommand cmd = new SqlCommand(String.Format("select orgid, tekst, dbo.GetOrgTreeXML({0}) as Subtree from tblOrg where OrgID = {0}", orgid), c); var rdr = cmd.ExecuteReader(); rdr.Read(); StringBuilder sb = new StringBuilder(); sb.AppendFormat("&lt;node orgid=\"{0}\" tekst=\"{1}\"&gt;",rdr.GetInt32(0),rdr.GetString(1)); sb.Append(rdr.GetString(2)); sb.Append("&lt;/node&gt;"); xds.Data = sb.ToString(); xds.ID = "treedata"; rdr.Close(); c.Close(); return xds; } This gives me an XML-structure to use with the asp.net treeview control (I also use the CssFriendly extender to get nicer code) My problem is that if I logon on my pc with a code that gives me access on a lower level in the tree hierarchy (it's an orgianization hierarchy), it somehow "remembers" what level i logon at. So when my coworker tests from her computer with another code, giving access to another place in the tree, she get's the same tree as me. (The tree is supposed to show your own level and down.) I have added a html-comment to show what orgid it passes to the function, and the orgid passed is correct. So either the treeview caches something serverside, or the sqlquery caches it's result somehow... Any ideas? Sql function: ALTER function [dbo].[GetOrgTreeXML](@orgid int) returns XML begin RETURN (select org.orgid as '@orgid', org.tekst as '@tekst', [dbo].GetOrgTreeXML(org.orgid) from tblOrg org where (@orgid is null and Eier is null) or Eier=@orgid for XML PATH('NODE'), TYPE) end Extra code as requested: int orgid = int.Parse(Session["org"].ToString()); string orgname = context.Orgs.Where(q => q.OrgID == orgid).First().Tekst; debuglit.Text = String.Format("<!-- Id: {0} \n name: {1} -->", orgid, orgname); var orgxml = Globals.getXmlSourceFromOrgid(orgid); tvNavtree.DataSource = orgxml; tvNavtree.DataBind(); Where "debuglit" is a asp:Literal in the aspx file. EDIT: I have narrowed it down. All functions returns correct values. It just doesn't bind to it. I suspect the CssFriendly adapter to have something to do with it. I disabled the CssFriendly adapter and the problem persists... Stepping through it in debug it's correct all the way, with the stepper standing on "tvNavtree.DataBind();" I can hover the pointer over the tvNavtree.Datasource and see that it actually has the correct data. So something must be faulting in the binding process...

    Read the article

  • auth.getSession not working

    - by dC
    hi all, i am having troubles with calling auth.getSession in my proxy. It is being called from a iPhone connect client. When the proxy URL is invocated from the iphone, FB returns a 100 invalid parameter error to the proxy. However the 2nd attempt from iPhone yields success. Both times the proxy is doing the same code, only the auth_token is different. Doing a good search, shows that this is a problematic method. I have tried everything in code and even called in a iPhone expert to see if the problem is on the iPhone client. I have concentrated my efforts on the java api being the problem, however i believe the problem lies else where. I have done the following checked and tested java code checked and test iphone code checked FB application settings. any help is most appreciated. ------Here is my java code.--------- String api_secret = FacebookProperty.getString(FacebookConstants.PROPERTY_API_SECRET); String api_key = FacebookProperty.getString(FacebookConstants.PROPERTY_API_KEY); String call_back_url = FacebookProperty.getString(FacebookConstants.PROPERTY_CALLBACK_URL); int connectTimeout = 200000; //use the xml helper // Make sure the user is logged in to Facebook String authToken = request.getParameter("auth_token"); log.info( "FACEBOOK: auth_token?: " + authToken ); Map<String, Object> model = new HashMap<String, Object>(); model.put(FacebookConstants.MODEL_WELCOME_SELECTED, true); FacebookXmlRestClient facebookRestClient = new FacebookXmlRestClient(api_key, api_secret); boolean generateSessionSecret = true; //always true of connect client try{ facebookRestClient.setConnectTimeout(connectTimeout ); String authSessionKey = facebookRestClient.auth_getSession(authToken, true); } catch (Exception e) { log.log( Level.SEVERE, e.toString()); log.log( Level.SEVERE, e.getMessage()); } String rawResponse = facebookRestClient.getRawResponse(); log.info( rawResponse ); -------the iphone code is ----------- session = [FBSession sessionForApplication:myApiKey getSessionProxy:myURL delegate:self]; -----------the error is -------------- <error_response xmlns="http://api.facebook.com/1.0/" xmlns:xsi="http:// www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http:// api.facebook.com/1.0/ http://api.facebook.com/1.0/facebook.xsd"> <error_code>100</error_code> <error_msg>Invalid parameter</error_msg> <request_args list="true"> <arg> <key>api_key</key> <value>bf22a0512c8558a1656d73160507460b</value> </arg> <arg> <key>auth_token</key> <value>fcd1e597aca5c9ba43875cdd01221be5</value> </arg> <arg> <key>call_id</key> <value>1269066988055</value> </arg> <arg> <key>format</key> <value>xml</value> </arg> <arg> <key>generate_session_secret</key> <value>true</value> </arg> <arg> <key>method</key> <value>facebook.auth.getSession</value> </arg> <arg> <key>sig</key> <value>e9f477fd72adf74cd2de72528fd9aa72</value> </arg> <arg> <key>v</key> <value>1.0</value> </arg> </request_args> </error_response>

    Read the article

  • <div> of images, retrieved by getJSON, disappear after append()

    - by Midiane
    Hi all I'm working on a GMaps application to retrieve images, via getJSON(), and to populate a popup marker. The following is the markup which I add to the marker dynamically: <div id="images"></div> <div id="CampWindow" style="display:none;width:550px;height:500px;"> <h4 id="camp-title"></h4> <p>View... (all links open in new windows)</p> <ul> <li><a id="camp-hp-link" target="_blank" href="">camp home page</a></li> <li>information: <a id="camp-av-link" target="_blank" href="">availability</a> | <a id="camp-vi-link" target="_blank" href="">vital information</li> </ul> <p id="message"></p> I've been clawing out my eyes and woohoo for the past couple of days, trying to get the images to show inside the CampWindow . Then, I decided to think laterally and to see if the images were being retrieved at all. I then moved the images outside and sure as Bob (Hope), the images were being retrieved and refreshed with every click. So, I decided to the keep the images outside and then once loaded, append it to the CampWindow . It's not working still; when I append the div to the main CampWindow div, the images won't show. I check in Firebug with the pointer thingy and it shows me the images as empty. I try it again with the images outside and it shows the images. I've tried before append and appendTo with no success. Am I missing something here? I have no more woohoo to claw out. Please, please help. marker.clicked = function(marker){ $("#images").html(''); $('#camp-title').text(this.name); $('#camp-hp-link').attr('href', this.url); $('#camp-av-link').attr('href', this.url + '/tourism/availability.php'); $('#camp-vi-link').attr('href', this.url + '/tourism/general.php'); // get resort images via jQuery AJAX call - includes/GetResortImages.inc.php $.getJSON('./includes/GetResortImages.inc.php', { park: this.park_name, camp: this.camp_name }, RetrieveImages); function RetrieveImages (data) { if ('failed' == data.status) { $('#messages').append("<em>We don't have any images for this rest camp right now!</em>"); } else { if ('' != data.camp) { $.each(data, function(key,value){ $("<img/>").attr("src", value).appendTo('#images'); }); } } } //.append($("#images")); $("#CampWindow").show(); var windowContent = $("<html />"); $("#CampWindow").appendTo(windowContent); var infoWindowAnchor = marker.getIcon().infoWindowAnchor; var iconAnchor = marker.getIcon().iconAnchor; var offset = new google.maps.Size(infoWindowAnchor.x-iconAnchor.x,infoWindowAnchor.y-iconAnchor.y); map.openInfoWindowHtml(marker.getLatLng(), windowContent.html(), {pixelOffset:offset}); } markers.push(marker); });

    Read the article

  • Slider Position

    - by RobinHood
    I had used this code for to create a slider. It's working fine. I want to place the slider next to my label control. Like this (Slidder : Slidder Bar) How to do that? <div> <tr> <td class="aln-rht"> <asp:Label ID="Literal4" runat="server" Text="Slidder :" Font-Bold="true" /> </td> <td> <%=Html.DropDownList("Scale", null, "--Select Scale--", new { id = "speed1" , Style = "display:none"})%> </td> </tr> </div> <script type="text/javascript"> $(function () { var abc = $('select#speed1').selectToUISlider().next(); fixToolTipColor(); }); function fixToolTipColor() { $('.ui-tooltip-pointer-down-inner').each(function () { var bWidth = $('.ui-tooltip-pointer-down-inner').css('borderTopWidth'); var bColor = $(this).parents('.ui-slider-tooltip').css('backgroundColor') $(this).css('border-top', bWidth + ' Solid ' + bColor); }); } </script> The ui.slider.extras.css, selectToUISlider.JQuery.js and ui.slider.js files I had used This is JQuery-ui-1.7.1.custom.css, which i am using... .ui-slider { position: relative; text-align: left; } .ui-slider .ui-slider-handle { position: absolute; z-index: 2; width: 1.2em; height: 1.2em; cursor: default; border-color: Maroon; background-color: Olive} .ui-slider .ui-slider-range { position: absolute; z-index: 1; font-size: .7em; display: block; border: 0; } .ui-slider-horizontal { height: .8em; border-color: Olive;} .ui-slider-horizontal .ui-slider-handle { top: -.3em; margin-left: -.6em; } .ui-slider-horizontal .ui-slider-range { top: 0; height: 100%; } .ui-slider-horizontal .ui-slider-range-min { left: 0; } .ui-slider-horizontal .ui-slider-range-max { right: 0; } .ui-slider-vertical { width: .8em; height: 100px; border-color: Olive; } .ui-slider-vertical .ui-slider-handle { left: -.3em; margin-left: 0; margin-bottom: -.6em; } .ui-slider-vertical .ui-slider-range { left: 0; width: 100%; } .ui-slider-vertical .ui-slider-range-min { bottom: 0; } .ui-slider-vertical .ui-slider-range-max { top: 0; }/* Tabs

    Read the article

  • Form values appear blank when submitting to the database - Drupal FormAPI

    - by GaxZE
    Hello, I have been working on this drupal form API script for past week and half. to give an insight into my problem.. the form below merely lists a host of database records which contain 5 individual scoring ranks. (mind, action, relationship, language and IT). this code is apart of my own custom module where all values are listed from the database. the idea behind this module is to be able to edit these values on a large scale. I am having trouble getting the values entered in the form to be passed to the variables inside of the marli_admin_submit function. the second problem is the assigning those values to their specific ID. for this purpose id like to add im merely trying to get just one score updated rather than all of them. below is my code. any advice appreciated. function marli_scores(){ $result = pager_query(db_rewrite_sql('SELECT * FROM marli WHERE value != " "')); while ($node = db_fetch_object($result)) { $attribute = $node->attribute; $field = $node->field_name; $item = $node->value; $mind = $node->mind; $action = $node->action; $relationship = $node->relationship; $language = $node->language; $it = $node->it; $form['field'][$node->marli_id] = array('#type' => 'markup', '#value' => $field, '#prefix' => '<b>', '#suffix' => '</b>'); $form['title'][$node->marli_id] = array('#type' => 'markup', '#value' => $item, '#prefix' => '<b>', '#suffix' => '</b>'); $form['mind'][$node->marli_id] = array('#type' => 'textfield', '#maxlength' => '1', '#size' => '1', '#value' => $mind); $form['action'][$node->marli_id] = array('#type' => 'textfield', '#maxlength' => '1', '#size' => '1', '#value' => $action); $form['relationship'][$node->marli_id] = array('#type' => 'textfield', '#maxlength' => '1', '#size' => '1', '#value' => $relationship); $form['language'][$node->marli_id] = array('#type' => 'textfield', '#maxlength' => '1', '#size' => '1', '#value' => $language); $form['it'][$node->marli_id] = array('#type' => 'textfield', '#maxlength' => '1', '#size' => '1', '#value' => $it); } $form['pager'] = array('#value' => theme('pager', NULL, 50, 0)); $form['save'] = array('#type' => 'submit', '#value' => t('Save')); $form['#theme'] = 'marli_scores'; return $form; } function marli_admin_submit($form, &$form_state) { $marli_id = 4; $submit_mind = $form_state['values']['mind'][$marli_id]; $submit_action = $form_state['values']['action'][$marli_id]; $submit_relationship = $form_state['values']['relationship'][$marli_id]; $submit_language = $form_state['values']['language'][$marli_id]; $submit_it = $form_state['values']['it'][$marli_id]; $sql_query = "UPDATE {marli} SET mind = %d, action = %d, relationship = %d, language = %d, it = %d WHERE marli_id = %d"; if ($success = db_query($sql_query, $submit_mind, $submit_action, $submit_relationship, $submit_language, $submit_it)) { drupal_set_message(t(' Values have been saved.')); } else { drupal_set_message(t('There was an error saving your data. Please try again.')); } }

    Read the article

  • Why does this Quicksort work?

    - by IVlad
    I find this Quicksort partitioning approach confusing and wrong, yet it seems to work. I am referring to this pseudocode. Note: they also have a C implementation at the end of the article, but it's very different from their pseudocode, so I don't care about that. I have also written it in C like this, trying to stay true to the pseudocode as much as possible, even if that means doing some weird C stuff: #include <stdio.h> int partition(int a[], int p, int r) { int x = a[p]; int i = p - 1; int j = r + 1; while (1) { do j = j - 1; while (!(a[j] <= x)); do i = i + 1; while (!(a[i] >= x)); if (i < j) { int t = a[i]; a[i] = a[j]; a[j] = t; } else { for (i = 1; i <= a[0]; ++i) printf("%d ", a[i]); printf("- %d\n", j); return j; } } } int main() { int a[100] = //{8, 6,10,13,15,8,3,2,12}; {7, 7, 6, 2, 3, 8, 4, 1}; partition(a, 1, a[0]); return 0; } If you run this, you'll get the following output: 1 6 2 3 4 8 7 - 5 However, this is wrong, isn't it? Clearly a[5] does not have all the values before it lower than it, since a[2] = 6 > a[5] = 4. Not to mention that 7 is supposed to be the pivot (the initial a[p]) and yet its position is both incorrect and lost. The following partition algorithm is taken from wikipedia: int partition2(int a[], int p, int r) { int x = a[r]; int store = p; for (int i = p; i < r; ++i) { if (a[i] <= x) { int t = a[i]; a[i] = a[store]; a[store] = t; ++store; } } int t = a[r]; a[r] = a[store]; a[store] = t; for (int i = 1; i <= a[0]; ++i) printf("%d ", a[i]); printf("- %d\n", store); return store; } And produces this output: 1 6 2 3 8 4 7 - 1 Which is a correct result in my opinion: the pivot (a[r] = a[7]) has reached its final position. However, if I use the initial partitioning function in the following algorithm: void Quicksort(int a[], int p, int r) { if (p < r) { int q = partition(a, p, r); // initial partitioning function Quicksort(a, p, q); Quicksort(a, q + 1, r); // I'm pretty sure q + r was a typo, it doesn't work with q + r. } } ... it seems to be a correct sorting algorithm. I tested it out on a lot of random inputs, including all 0-1 arrays of length 20. I have also tried using this partition function for a selection algorithm, in which it failed to produce correct results. It seems to work and it's even very fast as part of the quicksort algorithm however. So my questions are: Can anyone post an example on which the algorithm DOESN'T work? If not, why does it work, since the partitioning part seems to be wrong? Is this another partitioning approach that I don't know about?

    Read the article

  • How can I css for List/grid in div with border?

    - by Saidul Haque Nayan
    I want to create a list table in DIV with border. When more content of width of a column then line break and border increase but other column border not increase. see the example: Untitled Document /list/ .list_container{ float:left; width: 550px; margin-bottom:10px; font-family: vardana; } .list_row{ float:left; width: 548px; border-bottom:1px #9F9F9F solid; } .list_row:hover{ background-color:#CCCCCC; } .list_rowHeader{ float:left; width: 548px; border-bottom:1px #9F9F9F solid; border-top:1px #9F9F9F solid; font-weight: bold; background-color: #FF0000; color: #FFFFFF; } .list_column{ float:left; padding: 3px; border-left: 1px #9F9F9F solid; } .list_columnLast{ float:left; padding: 3px; border-left: 1px #9F9F9F solid; border-right: 1px #9F9F9F solid; } .even{ background-color:#E0E0E0!important;} .odd{ background-color:#FFFFFF!important;} </style> </head> <body> <div class="list_container" > <div class="list_rowHeader" > <div class="list_column" style="width: 250px;">Name</div> <div class="list_column" style="width: 96px;"> Bid Amount</div> <div class="list_columnLast" style="width: 180px;"> Email </div> </div> <div class="list_row even" > <div class="list_column" style="width: 250px;">Saidul Haque</div> <div class="list_column" style="width: 96px;"> 2131231</div> <div class="list_columnLast" style="width: 180px;"> [email protected]</div> </div> <div class="list_row odd" > <div class="list_column" style="width: 250px;">Saidul Haque, Sonargaon, Bangladesh Dhaka, </div> <div class="list_column" style="width: 96px;"> 2131231</div> <div class="list_columnLast" style="width: 180px;"> [email protected]</div> </div> <div class="list_row even" > <div class="list_column" style="width: 250px;">Saidul Haque</div> <div class="list_column" style="width: 96px;"> 2131231</div> <div class="list_columnLast" style="width: 180px;"> [email protected]</div> </div> </div> </body> Any body solve this problem?

    Read the article

  • Explicit method tables in C# instead of OO - good? bad?

    - by FunctorSalad
    Hi! I hope the title doesn't sound too subjective; I absolutely do not mean to start a debate on OO in general. I'd merely like to discuss the basic pros and cons for different ways of solving the following sort of problem. Let's take this minimal example: you want to express an abstract datatype T with functions that may take T as input, output, or both: f1 : Takes a T, returns an int f2 : Takes a string, returns a T f3 : Takes a T and a double, returns another T I'd like to avoid downcasting and any other dynamic typing. I'd also like to avoid mutation whenever possible. 1: Abstract-class-based attempt abstract class T { abstract int f1(); // We can't have abstract constructors, so the best we can do, as I see it, is: abstract void f2(string s); // The convention would be that you'd replace calls to the original f2 by invocation of the nullary constructor of the implementing type, followed by invocation of f2. f2 would need to have side-effects to be of any use. // f3 is a problem too: abstract T f3(double d); // This doesn't express that the return value is of the *same* type as the object whose method is invoked; it just expresses that the return value is *some* T. } 2: Parametric polymorphism and an auxilliary class (all implementing classes of TImpl will be singleton classes): abstract class TImpl<T> { abstract int f1(T t); abstract T f2(string s); abstract T f3(T t, double d); } We no longer express that some concrete type actually implements our original spec -- an implementation is simply a type Foo for which we happen to have an instance of TImpl. This doesn't seem to be a problem: If you want a function that works on arbitrary implementations, you just do something like: // Say we want to return a Bar given an arbitrary implementation of our abstract type Bar bar<T>(TImpl<T> ti, T t); At this point, one might as well skip inheritance and singletons altogether and use a 3 First-class function table class /* or struct, even */ TDictT<T> { readonly Func<T,int> f1; readonly Func<string,T> f2; readonly Func<T,double,T> f3; TDict( ... ) { this.f1 = f1; this.f2 = f2; this.f3 = f3; } } Bar bar<T>(TDict<T> td; T t); Though I don't see much practical difference between #2 and #3. Example Implementation class MyT { /* raw data structure goes here; this class needn't have any methods */ } // It doesn't matter where we put the following; could be a static method of MyT, or some static class collecting dictionaries static readonly TDict<MyT> MyTDict = new TDict<MyT>( (t) => /* body of f1 goes here */ , // f2 (s) => /* body of f2 goes here */, // f3 (t,d) => /* body of f3 goes here */ ); Thoughts? #3 is unidiomatic, but it seems rather safe and clean. One question is whether there are any performance concerns with it. I don't usually need dynamic dispatch, and I'd prefer if these function bodies get statically inlined in places where the concrete implementing type is known statically. Is #2 better in that regard?

    Read the article

  • jQuery - I'm getting unexpected outputs from a basic math formula.

    - by OllieMcCarthy
    Hi I would like to start by saying I'd greatly appreciate anyones help on this. I have built a small caculator to calculate the amount a consumer can save annually on energy by installing a ground heat pump or solar panels. As far as I can tell the mathematical formulas are correct and my client verified this yesterday when I showed him the code. Two problems. The first is that the calculator is outputting ridiculously large numbers for the first result. The second problem is that the solar result is only working when there are no zeros in the fields. Are there some quirks as to how one would write mathematical formulas in JS or jQuery? Any help greatly appreciated. Here is the link - http://www.olliemccarthy.com/test/johncmurphy/?page_id=249 And here is the code for the entire function - $jq(document).ready(function(){ // Energy Bill Saver // Declare Variables var A = ""; // Input for Oil var B = ""; // Input for Storage Heater var C = ""; // Input for Natural Gas var D = ""; // Input for LPG var E = ""; // Input for Coal var F = ""; // Input for Wood Pellets var G = ""; // Input for Number of Occupants var J = ""; var K = ""; var H = ""; var I = ""; // Declare Constants var a = "0.0816"; // Rate for Oil var b = "0.0963"; // Rate for NightRate var c = "0.0558"; // Rate for Gas var d = "0.1579"; // Rate for LPG var e = "0.121"; // Rate for Coal var f = "0.0828"; // Rate for Pellets var g = "0.02675"; // Rate for Heat Pump var x = "1226.4"; // Splittin up I to avoid error var S1 = ""; // Splitting up the calcuation for I var S2 = ""; // Splitting up the calcuation for I var S3 = ""; // Splitting up the calcuation for I var S4 = ""; // Splitting up the calcuation for I var S5 = ""; // Splitting up the calcuation for I var S6 = ""; // Splitting up the calcuation for I // Calculate H (Ground Sourced Heat Pump) $jq(".es-calculate").click(function(){ $jq(".es-result-wrap").slideDown(300); A = $jq("input.es-oil").val(); B = $jq("input.es-storage").val(); C = $jq("input.es-gas").val(); D = $jq("input.es-lpg").val(); E = $jq("input.es-coal").val(); F = $jq("input.es-pellets").val(); G = $jq("input.es-occupants").val(); J = ( A / a ) + ( B / b ) + ( C / c ) + ( D / d ) + ( E / e ) + ( F / f ) ; H = A + B + C + D + E + F - ( J * g ) ; K = ( G * x ) ; if ( A !== "0" ) { S1 = ( ( ( A / a ) / J ) * K * a ) ; } else { S1 = "0" ; } if ( B !== "0" ) { S2 = ( ( ( B / b ) / J ) * K * b ) ; } else { S2 = "0" ; } if ( C !== "0" ) { S3 = ( ( ( C / c ) / J ) * K * c ) ; } else { S3 = "0" ; } if ( D !== "0" ) { S4 = ( ( ( D / d ) / J ) * K * d ) ; } else { S4 = "0" ; } if ( E !== "0" ) { S5 = ( ( ( E / e ) / J ) * K * e ) ; } else { S5 = "0" ; } if ( F !== "0" ) { S6 = ( ( ( F / f ) / J ) * K * f ) ; } else { S6 = "0" ; } I = S1 + S2 + S3 + S4 + S5 + S6 ; if(!isNaN(H)) {$jq("span.es-result-span-h").text(H.toFixed(2));} else{$jq("span.es-result-span-h").text('Error: Please enter numerals only');} if(!isNaN(I)) {$jq("span.es-result-span-i").text(I.toFixed(2));} else{$jq("span.es-result-span-i").text('Error: Please enter numerals only');} }); });

    Read the article

  • PHP Frontpage/Page controller

    - by atno
    I using the following as Frontpage/Page Controller(s) and it's working ok so far, except two problems I'm facing which as you can see are the $pages array and the switch, which are actually much much longer as the one I've pasted here. Everytime there is a need for a new page controller I have to add it to $pages array and to switch which makes that list very long. How would you overcome this problem and do you see any other improvement on this code? loadLogic() in page controllers it is used to get functions under pages/controllername/logic/function.php. Frontpage Controller - index.php: include 'common/common.php'; if(!isset($_GET['p']) OR $_GET['p'] == ''){ $_GET['p'] = 'home'; header('Location: index.php?p=home'); } $pages = array('home','register','login','logout','page1','page2','page3'); $_GET['p'] = trim($_GET['p']); if(isset($_GET['p'])){ if(in_array($_GET['p'], $pages)){ switch ($_GET['p']) { case 'home': include 'home.php'; break; case 'register': include 'register.php'; break; case 'login': include 'login.php'; break; case 'logout': include 'logout.php'; break; case 'page1': include 'page1.php'; break; case 'page2': include 'page2.php'; break; case 'page3': include 'page3.php'; break; } }else{ echo '404!'; } } Page Controller - {home,register,login,logout,page1,page2,page3}.php: include 'tpl/common/header.php'; contentStart(); if(isset($_SESSION['logged'])){ loadLogic('dashboard'); }else{ loadLogic('nologin'); } //Display login form in logic page instead links // if(!isset($_SESSION['logged'])){ contentEnd(); loadLogic('nologinForm'); }else{ contentEnd(); include'tpl/common/rcol.php'; } include 'tpl/common/footer.php'; function loadLogic(): function loadLogic($logic) { $path = dirname(__DIR__) . '/pages'; $controller = preg_split('/&/',$_SERVER['QUERY_STRING']); $controller = trim($controller[0],"p="); $logicPath = 'logic'; $logic = $logic . '.php'; $err = 0; $logicFullPath = $path.'/'.$controller.'/'.$logicPath.'/'.$logic; if($err == '0'){ include "$logicFullPath"; } } Folder Structure: projectName | ---> common | ---> pages | | | --->home | | | --->register | | | --->login | | | --->logout | | | --->page1 | | | --->page2 | | | --->page3 | ---> tpl | | | ---> common | --> home.php | --> register.php | --> login.php | --> logout.php | --> page1.php | --> page2.php | --> page3.php

    Read the article

  • php curl http 405 error mind body online api

    - by K_G
    I am trying to connect to the Mind Body Online API (their forum is down currently, so I came here). Below is the code I am using. I am receiving this: SERVER ERROR 405 - HTTP verb used to access this page is not allowed. The page you are looking for cannot be displayed because an invalid method (HTTP verb) was used to attempt to access. code: //Data, connection, auth $soapUrl = "http://clients.mindbodyonline.com/api/0_5"; // xml post structure $xml_post_string = '<?xml version="1.0" encoding="utf-8"?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns="http://clients.mindbodyonline.com/api/0_5"> <soapenv:Header/> <soapenv:Body> <GetClasses> <Request> <SourceCredentials> <SourceName>username</SourceName> <Password>password</Password> <SiteIDs> <int>site id</int> </SiteIDs> </SourceCredentials> <UserCredentials> <Username>username</Username> <Password>password</Password> <SiteIDs> <int></int> </SiteIDs> </UserCredentials> <Fields> <string>Classes.Resource</string> </Fields> <XMLDetail>Basic</XMLDetail> <PageSize>10</PageSize> <CurrentPageIndex>0</CurrentPageIndex> </Request> </GetClasses> </soapenv:Body> </soapenv:Envelope>'; $headers = array( "Content-type: text/xml;charset=\"utf-8\"", "Accept: text/xml", "Cache-Control: no-cache", "Pragma: no-cache", "SOAPAction: http://clients.mindbodyonline.com/api/0_5", "Content-length: ".strlen($xml_post_string), ); //SOAPAction: your op URL $url = $soapUrl; // PHP cURL for https connection with auth $ch = curl_init(); curl_setopt($ch, CURLOPT_URL, $url); curl_setopt($ch, CURLOPT_RETURNTRANSFER, true); curl_setopt($ch, CURLOPT_HTTPAUTH, CURLAUTH_ANY); curl_setopt($ch, CURLOPT_TIMEOUT, 10); curl_setopt($ch, CURLOPT_POST, true); curl_setopt($ch, CURLOPT_POSTFIELDS, $xml_post_string); // the SOAP request curl_setopt($ch, CURLOPT_HTTPHEADER, $headers); // converting $response = curl_exec($ch); curl_close($ch); var_dump($response); // converting //$response1 = str_replace("<soap:Body>","",$response); //$response2 = str_replace("</soap:Body>","",$response1); // convertingc to XML //$parser = simplexml_load_string($response2); // user $parser to get your data out of XML response and to display it. Any help would be great and if anyone has any experience working with their API, my first time ;) Here is the post on stack I am going off of: SOAP request in PHP

    Read the article

  • backgroundworker+wpf -> frozen window

    - by Valetudox
    -progressbar always 0% -the window is froozen (while DoWork r.) -if System.threading.thread.sleep(1) on - works perfectly whats the problem? private void btnNext_Click(object sender, RoutedEventArgs e) { this._worker = new BackgroundWorker(); this._worker.DoWork += delegate(object s, DoWorkEventArgs args) { long current = 1; long max = generalMaxSzam(); for (int i = 1; i <= 30; i++) { for (int j = i+1; j <= 30; j++) { for (int c = j+1; c <= 30; c++) { for (int h = c+1; h <= 30; h++) { for (int d = h+1; d <= 30; d++) { int percent = Convert.ToInt32(((decimal)current / (decimal)max) * 100); this._worker.ReportProgress(percent); current++; //System.Threading.Thread.Sleep(1); - it works well } } } } } }; this._worker.WorkerReportsProgress = true; this._worker.RunWorkerCompleted += delegate(object s, RunWorkerCompletedEventArgs args) { this.Close(); }; this._worker.ProgressChanged += delegate(object s, ProgressChangedEventArgs args) { this.statusPG.Value = args.ProgressPercentage; }; this._worker.RunWorkerAsync(); } <Window x:Class="SzerencsejatekProgram.Create" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" Title="Létrehozás" mc:Ignorable="d" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" Height="500" Width="700"> <DockPanel> <Button DockPanel.Dock="Right" Name="btnNext" Width="80" Click="btnNext_Click">Tovább</Button> <StatusBar DockPanel.Dock="Bottom"> <StatusBar.ItemsPanel> <ItemsPanelTemplate> <Grid> <Grid.ColumnDefinitions> <ColumnDefinition Width="*"/> <ColumnDefinition Width="Auto"/> <ColumnDefinition Width="auto"/> <ColumnDefinition Width="auto"/> </Grid.ColumnDefinitions> </Grid> </ItemsPanelTemplate> </StatusBar.ItemsPanel> <StatusBarItem Grid.Column="1"> <TextBlock Name="statusText"></TextBlock> </StatusBarItem> <StatusBarItem Grid.Column="2"> <ProgressBar Name="statusPG" Width="80" Height="18" IsEnabled="False" /> </StatusBarItem> <StatusBarItem Grid.Column="3"> <Button Name="statusB" IsCancel="True" IsEnabled="False">Cancel</Button> </StatusBarItem> </StatusBar> </DockPanel> </Window>

    Read the article

  • Algorithm to select groups of similar items in 2d array

    - by mafutrct
    There is a 2d array of items (in my case they are called Intersections). A certain item is given as a start. The task is to find all items directly or indirectly connected to this item that satisfy a certain function. So the basic algorithm is like this: Add the start to the result list. Repeat until no modification: Add each item in the array that satisfies the function and touches any item in the result list to the result list. My current implementation looks like this: private IList<Intersection> SelectGroup ( Intersection start, Func<Intersection, Intersection, bool> select) { List<Intersection> result = new List<Intersection> (); Queue<Intersection> source = new Queue<Intersection> (); source.Enqueue (start); while (source.Any ()) { var s = source.Dequeue (); result.Add (s); foreach (var neighbour in Neighbours (s)) { if (select (start, neighbour) && !result.Contains (neighbour) && !source.Contains (neighbour)) { source.Enqueue (neighbour); } } } Debug.Assert (result.Distinct ().Count () == result.Count ()); Debug.Assert (result.All (x => select (x, result.First ()))); return result; } private List<Intersection> Neighbours (IIntersection intersection) { int x = intersection.X; int y = intersection.Y; List<Intersection> list = new List<Intersection> (); if (x > 1) { list.Add (GetIntersection (x - 1, y)); } if (y > 1) { list.Add (GetIntersection (x, y - 1)); } if (x < Size) { list.Add (GetIntersection (x + 1, y)); } if (y < Size) { list.Add (GetIntersection (x, y + 1)); } return list; } (The select function takes a start item and returns true iff the second item satisfies.) This does its job and turned out to be reasonable fast for the usual array sizes (about 20*20). However, I'm interested in further improvements. Any ideas? Example (X satisfies in relation to other Xs, . does never satisfy): .... XX.. .XX. X... In this case, there are 2 groups: a central group of 4 items and a group of a single item in the lower left. Selecting the group (for instance by starting item [2, 2]) returns the former, while the latter can be selected using the starting item and sole return value [0, 3]. Example 2: .A.. ..BB A.AA This time there are 4 groups. The 3 A groups are not connected, so they are returned as separate groups. The bigger A and B groups are connected, but A does not related to B so they are returned as separate groups.

    Read the article

  • optimizing the jquery in django

    - by sankar
    I have done the following code which actually dynamically generate the values in the third list box using ajax and jquery concepts. Thoug it works, i need to optimize it. Below is the code i am working on now. <html> <head> <title>Comparison based on ID Number</title> <script src="http://code.jquery.com/jquery-latest.js"></script> </head> <body> {% if form.errors %} <p style="color: red;"> Please correct the error{{ form.errors|pluralize }} below. </p> {% endif %} <form action="/idnumber/" method="post" align= "center">{% csrf_token %} <p>Select different id numbers and the name of the <b> Measurement Group </b>to start the comparison</p> <table align = "center"> <tr> <th><label for="id_criteria_1">Id Number 1:</label></th> <th> {{ form.idnumber_1 }} </th> </tr> <tr> <th><label for="id_criteria_2">Id Number 2:</label></th> <th> {{ form.idnumber_2 }} </th> </tr> <tr> <th><label for="group_name_list">Group Name:</label></th> <th><select name="group_name_list" id="id_group_name_list"> <option>Select</option> </select> </th> </tr> <script> $('#id_idnumber_2').change( function get_group_names() { var value1 = $('#id_idnumber_1').attr('value'); var value2 = $(this).attr('value'); alert(value1); alert(value2); var request = $.ajax({ url: "/getGroupnamesforIDnumber/", type: "GET", data: {idnumber_1 : value1,idnumber_2 : value2}, dataType: "json", success: function(data) { alert(data); var myselect = document.getElementById("group_name_list"); document.getElementById("group_name_list").options.length = 1; var length_of_data = data.length; alert(length_of_data); try{ for(var i = 0;i < length_of_data; i++) { myselect.add(new Option(data[i].group_name, "i"), myselect.options[i]) //add new option to beginning of "sample" } } catch(e){ //in IE, try the below version instead of add() for(var i = 0;i < length_of_data; i++) { myselect.add(new Option(data[i].group_name, data[i].group_name)) //add new option to end of "sample" } } } }); }); </script> <tr align = "center"><th><input type="submit" value="Submit"></th></tr> </table> </form> </body> </html> everything works fine but there is a little problem in my code. (ie) my ajax function calls only when there is a change in the select list 2 (ie) 'id_number_2'. I want to make it call in such a way that which ever select box, the third list box should be updated automatically. Can anyone please help me on this with a possible logical solution

    Read the article

  • Converting OCaml to F#: F# equivelent of Pervasives at_exit

    - by Guy Coder
    I am converting the OCaml Format module to F# and tracked a problem back to a use of the OCaml Pervasives at_exit. val at_exit : (unit -> unit) -> unit Register the given function to be called at program termination time. The functions registered with at_exit will be called when the program executes exit, or terminates, either normally or because of an uncaught exception. The functions are called in "last in, first out" order: the function most recently added with at_exit is called first. In the process of conversion I commented out the line as the compiler did not flag it as being needed and I was not expecting an event in the code. I checked the FSharp.PowerPack.Compatibility.PervasivesModule for at_exit using VS Object Browser and found none. I did find how to run code "at_exit"? and How do I write an exit handler for an F# application? The OCaml line is at_exit print_flush with print_flush signature: val print_flush : (unit -> unit) Also in looking at the use of it during a debug session of the OCaml code, it looks like at_exit is called both at the end of initialization and at the end of each use of a call to the module. Any suggestions, hints on how to do this. This will be my first event in F#. EDIT Here is some of what I have learned about the Format module that should shed some light on the problem. The Format module is a library of functions for basic pretty printer commands of simple OCaml values such as int, bool, string. The format module has commands like print_string, but also some commands to say put the next line in a bounded box, think new set of left and right margins. So one could write: print_string "Hello" or open_box 0; print_string "<<"; open_box 0; print_string "p \/ q ==> r"; close_box(); print_string ">>"; close_box() The commands such as open_box and print_string are handled by a loop that interprets the commands and then decides wither to print on the current line or advance to the next line. The commands are held in a queue and there is a state record to hold mutable values such as left and right margin. The queue and state needs to be primed, which from debugging the test cases against working OCaml code appears to be done at the end of initialization of the module but before the first call is made to any function in the Format module. The queue and state is cleaned up and primed again for the next set of commands by the use of mechanisms for at_exit that recognize that the last matching frame for the initial call to the format modules has been removed thus triggering the call to at_exit which pushes out any remaining command in the queue and re-initializes the queue and state. So the sequencing of the calls to print_flush is critical and appears to be at more than what the OCaml documentation states.

    Read the article

  • How to cleverly stop "while loop" (php)

    - by user3735697
    I'm having trouble with creating code that echoes a bunch of stuff that is corresponding to the mysql database row. It needs to keep creating the content until all rows are used and then stop. But for some reason the php file causes the browser to keep loading (it never ends). Any help would be appreciated! Thanks! <?php mysql_connect ("localhost", "root", "") or die ("We couldn't connect!"); mysql_select_db ("dr"); mysql_query ("SELECT * FROM songs"); $result = mysql_query ("SELECT * FROM songs"); while ($row=mysql_fetch_array($result)) { $name = $row ['songname']; $genres = $row ['songgenres']; $mediafire = $row ['mediafirelink']; $dropbox = $row ['dropboxlink']; $source = $row ['audiosource']; echo " <div class='playing'> <!-- ======== Song Name ======== --> <li class='songnameli' id='$source'> <span class='info'>$name</span> <audio> <source src='music/singles/$source.mp3'> <source src='music/singles/$source.ogg'> </audio> </li> <!-- ======== Playlist ======== --> <li class='playlistli'> <img src='icons/addtoplaylist.png' title='Add tot the playlist!' /> </li> <!-- ======== Genres ======== --> <li class='genresli'> <img src='icons/genres.png' title='Related genres' /> <span class='addedtext genres'>$genres</span> </li> <!-- ======== Social Media links ======== --> <li> <span> <img src='icons/share.png' alt='Share this with your friends!' title='Share this!'> <!-- /// facebook /// --> <a href='http://www.facebook.com/sharer.php?u=http://www.declassified-recordings.com' class='addedtext nlink' target='blank_' onclick='popup (this.href, 800, 500); return false'>Facebook </a> <span>/</span> <!-- /// Twitter /// --> <a href='http://twitter.com/share? text=Thank%20you%20For%20Sharing!%20It%20means%20the%20world%20to%20us!%40Declassifi3d%20 &url=http://www.declassified-recordings.com' class='twitterlink nlink' target='blank_' onclick='popup (this.href, 800, 500); return false'>Twitter</a> </span> </li> <!-- ======== Download links ======== --> <li> <img src='icons/download.png' title='Download!' /> <span> <!-- /// Mediafire /// --> <a href='$mediafire' class='addedtext nlink' target='_blank'>Mediafire</a> <span class='genres'>/</span> <!-- /// Dropbox /// --> <a href='$mediafire' class='twitterlink nlink' target='_blank'>Dropbox</a> </span> </li> </div>"; } mysql_close (); ?>

    Read the article

  • Asus me302c create script crash

    - by wxfred
    State beforehand: So far, only Asus me302c would crash when it creates a script. This device can create renderscript context successfully 06-03 10:12:50.509: V/RenderScript_jni(3144): RS compat mode 06-03 10:12:50.509: V/RenderScript(3144): 0x610bbfc0 Launching thread(s), CPUs 4 06-03 10:12:50.549: D/libEGL(3144): loaded /vendor/lib/egl/libEGL_POWERVR_SGX544_115.so 06-03 10:12:50.559: D/libEGL(3144): loaded /vendor/lib/egl/libGLESv1_CM_POWERVR_SGX544_115.so 06-03 10:12:50.559: D/libEGL(3144): loaded /vendor/lib/egl/libGLESv2_POWERVR_SGX544_115.so 06-03 10:12:50.619: D/OpenGLRenderer(3144): Enabling debug mode 0 06-03 10:12:52.869: D/dalvikvm(3144): Rejecting registerization due to ushr-int/lit8 v4, v7, (#19) When create a script, it crashed. 06-03 09:55:09.859: D/basefilter(26682): ===createScript=== 06-03 09:55:09.869: E/RenderScript(26682): Unable to open shared library (/data/data/xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxx.xxxx//lib/librs.basefilter.so): Cannot load library: soinfo_relocate(linker.cpp:975): cannot locate symbol "_Z3dotDv3_fS_" referenced by "librs.basefilter.so"... 06-03 09:55:09.869: E/RenderScript(26682): Unable to open system shared library (/system/lib/librs.basefilter.so): (null) 06-03 09:55:09.869: D/AndroidRuntime(26682): Shutting down VM 06-03 09:55:09.869: W/dalvikvm(26682): threadid=1: thread exiting with uncaught exception (group=0x418b9e10) 06-03 09:55:09.869: E/AndroidRuntime(26682): FATAL EXCEPTION: main 06-03 09:55:09.869: E/AndroidRuntime(26682): android.support.v8.renderscript.RSRuntimeException: Loading of ScriptC script failed. 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.support.v8.renderscript.ScriptC.<init>(ScriptC.java:69) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.ScriptC_BaseFilter.<init>(ScriptC_BaseFilter.java:41) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.ScriptC_BaseFilter.<init>(ScriptC_BaseFilter.java:35) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.xxxxxx.TeethWhiteningRSFilter.onCreateScript(TeethWhiteningRSFilter.java:19) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.xxxxxx.xxxxxx.TeethWhiteningRSFilter.onCreateScript(TeethWhiteningRSFilter.java:1) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.BaseRSFilter.createScript(BaseRSFilter.java:39) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxxxxxxx.RSFilterEngine.addFilter(RSFilterEngine.java:76) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxx.xxxx.BeautyActivity.changeBeautyEffect(BeautyActivity.java:277) 06-03 09:55:09.869: E/AndroidRuntime(26682): at xxx.xxxxxxxxxxx.xxxxxxxxx.xxxxx.xxxx.BeautyActivity$2.onClick(BeautyActivity.java:100) 06-03 09:55:09.869: E/AndroidRuntime(26682): at com.android.internal.app.AlertController$ButtonHandler.handleMessage(AlertController.java:166) 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.os.Handler.dispatchMessage(Handler.java:99) 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.os.Looper.loop(Looper.java:152) 06-03 09:55:09.869: E/AndroidRuntime(26682): at android.app.ActivityThread.main(ActivityThread.java:5132) 06-03 09:55:09.869: E/AndroidRuntime(26682): at java.lang.reflect.Method.invokeNative(Native Method) 06-03 09:55:09.869: E/AndroidRuntime(26682): at java.lang.reflect.Method.invoke(Method.java:511) 06-03 09:55:09.869: E/AndroidRuntime(26682): at com.android.internal.os.ZygoteInit$MethodAndArgsCaller.run(ZygoteInit.java:793) 06-03 09:55:09.869: E/AndroidRuntime(26682): at com.android.internal.os.ZygoteInit.main(ZygoteInit.java:560) 06-03 09:55:09.869: E/AndroidRuntime(26682): at dalvik.system.NativeStart.main(Native Method) Now, I will post some related infomation. project.properties ... renderscript.target=9 renderscript.support.mode=true sdk.buildtools=19.0.3 device info Brand: Asus Model: ME302C OS: 4.2.2 CPU: Intel(R) Atom(TM) CPU Z2560 @1.60GHz GPU Renderer PowerVR SGX 544MP Finally, by the way, the same code runs well on Galaxy s2, s4, note 2.

    Read the article

  • Android : Providing auto autosuggestion in android places Api?

    - by user1787493
    I am very new to android Google maps i write the following program for displaying the auto sugesstion in the android when i am type the text in the Autocomplete text box it is going the input to the url but the out put is not showing in the program .please see once and let me know where i am doing the mistake. package com.example.exampleplaces; import java.util.ArrayList; import org.json.JSONArray; import org.json.JSONObject; import org.json.JSONTokener; import android.app.Activity; import android.os.AsyncTask; import android.os.Bundle; import android.provider.SyncStateContract.Constants; import android.text.Editable; import android.text.TextWatcher; import android.util.Log; import android.view.View; import android.widget.AutoCompleteTextView; import android.widget.ProgressBar; public class Place extends Activity { private AutoCompleteTextView mAtv_DestinationLocaiton; public ArrayList<String> autocompletePlaceList; public boolean DestiClick2; private ProgressBar destinationProgBar; private static final String GOOGLE_PLACE_API_KEY = ""; private static final String GOOGLE_PLACE_AUTOCOMPLETE_URL = "https://maps.googleapis.com/maps/api/place/autocomplete/json?"; //https://maps.googleapis.com/maps/api/place/autocomplete/output?parameters @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); autocompletePlaceList = new ArrayList<String>(); destinationProgBar=(ProgressBar)findViewById(R.id.progressBar1); mAtv_DestinationLocaiton = (AutoCompleteTextView) findViewById(R.id.et_govia_destination_location); mAtv_DestinationLocaiton.addTextChangedListener(new TextWatcher() { public void onTextChanged(CharSequence s, int start, int before, int count) { Log.i("Count", "" + count); if (!mAtv_DestinationLocaiton.isPerformingCompletion()) { autocompletePlaceList.clear(); DestiClick2 = false; new loadDestinationDropList().execute(s.toString()); } } public void beforeTextChanged(CharSequence s, int start, int count, int after) { // TODO Auto-generated method stub } public void afterTextChanged(Editable s) { // TODO Auto-generated method stub } }); } private class loadDestinationDropList extends AsyncTask<String, Void, ArrayList<String>> { @Override protected void onPreExecute() { // Showing progress dialog before sending http request destinationProgBar.setVisibility(View.INVISIBLE); } protected ArrayList<String> doInBackground(String... unused) { try { Thread.sleep(3000); } catch (InterruptedException e) { // TODO Auto-generated catch block e.printStackTrace(); } autocompletePlaceList = getAutocompletePlaces(mAtv_DestinationLocaiton.getText().toString()); return autocompletePlaceList; } public ArrayList<String> getAutocompletePlaces(String placeName) { String response2 = ""; ArrayList<String> autocompletPlaceList = new ArrayList<String>(); String url = GOOGLE_PLACE_AUTOCOMPLETE_URL + "input=" + placeName + "&sensor=false&key=" + GOOGLE_PLACE_API_KEY; Log.e("MyAutocompleteURL", "" + url); try { //response2 = httpCall.connectToGoogleServer(url); JSONObject jsonObj = (JSONObject) new JSONTokener(response2.trim() .toString()).nextValue(); JSONArray results = (JSONArray) jsonObj.getJSONArray("predictions"); for (int i = 0; i < results.length(); i++) { Log.e("RESULTS", "" + results.getJSONObject(i).getString("description")); autocompletPlaceList.add(results.getJSONObject(i).getString( "description")); } } catch (Exception e) { // TODO Auto-generated catch block e.printStackTrace(); } return autocompletPlaceList; } } }

    Read the article

< Previous Page | 1801 1802 1803 1804 1805 1806 1807 1808 1809 1810 1811 1812  | Next Page >