Search Results

Search found 16899 results on 676 pages for 'local'.

Page 181/676 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

  • Development environment to manage multiple Oracle databases

    - by jkohlhepp
    I am in an enterprise environment where we have applications that need to run against multiple Oracle databases. Developers may need to manage multiple vintages of these databases to support different test data or diagnose bugs against different versions of the code. Right now, we have a limited set of test environments set up on "real" Oracle servers within the data center. We juggle these among development and QA groups and there is a lot of conflicts and inefficiencies that arise because of it. I am taking a look at Oracle Express Edition which would allow me to spin up a local Oracle database. This is similar to the workflow I most often see with SQL Server. Devs work on their location machine until they are ready to integration and then they push their DB changes to integration / QA environments. However, from what I read it seems that Oracle XE only supports one database instance at a time. So if I have an application that utilizes two different databases, I can't have both of them running on my local machine. Is that correct? Does Oracle Standard or Personal editions get around this limitation? If I had one of those installed locally, how difficult would it be to get multiple databases working on the same development machine? How do dev shops handle developing against Oracle where they need to be using several different Oracle instances for their applications?

    Read the article

  • New cloud development workflow using Github, Cloud9ide and CloudFoundry.

    - by weng
    So time is changing towards cloud development/computing. I'm trying to get the new "cloud" workflow based on the services I'm going to use: Github, Cloud9ide and CloudFoundry. Here is what is on my mind: Github acts like a central (main repo) just like yesterday's local filesystem. Every service will base it service upon this main repo. Workflow: Github: I create a new Github repo served as main repo for the project. Cloud9ide. I open my Github repo and write my tests and implementation (BDD/TDD). When I'm ready I save (commit) it to main repo on Github. X: A running instance of Jenkins detects someone has committed and fetches the latest commit, builds, deploys, tests (yeti and/or selenium) and reports if the tests were passed or not. If not, I make another commit til all tests are passing. X: I run the CloudFoundry commands to push the main Github repo to CloudFoundry's server and it will deploy my app automatically. What I'm still confused about is where this X environment will be. On a local server where I have to install Jenkins? Or could I install it on Cloud9ide (when java is supported) or will it be on another cloud service? Also, that X environment has to be able to fetch (clone) the Github repo and run the build scripts. And since the concept of Cloud9ide is very new and there haven't been any other predecessors I really wonder how the workflow will look like. We all know Github's workflow. We now know CloudFoundry's workflow (deploy/scale with a restful API/command line tool). But how Cloud9Ide will operate is still somewhat unclear to me. Someone on Cloud9ide mentioned that there will be buttons like deploy so I can deploy with one click. But that I guess will depend on what services that deploy process will hook up into etc. Could someone enlighten this cloud workflow topic and fill in the gaps. Thanks.

    Read the article

  • Oracle 11g network configuration

    - by Kylo
    I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

    Read the article

  • OSX 10.6 integration into NIS/netgroup/automount infrastructure

    - by mdpc
    I have an existing infrastructure where accounts are maintained under NIS (yp) with no local unix accounts. Also, all the standard maps including hosts, mail aliases, netgroups, etc...are maintained in this form. Extensive use of the UNIX/Linux automounter with items scattered over the network on NFS servers. There are NO ACLs on any local or shared files. All mail needs to use basically the nullclient sendmail configuration feeding into a different system. I now have a requirement to integrate an Apple OSX 10.6 system into this environment and make it run seamlessly. My initial reading and second-hand information seems to indicate that this may not be possible on the native OSX 10.6 system. I'm concerned. Any ideas as to how to accomplish this task and make everybody happy? Thanks PS: I have never used an Apple OSX system.

    Read the article

  • weird resolving of path to command

    - by Eldamir
    I have the terminal editor 'nano' installed in two places on my mac /usr/bin/nano /opt/local/bin/nano The installations are of different versions. the one in /usr does not support my configuration in ~/.nanorc and the one in /opt does. when i open a file with the command 'nano file', errors are displayed, indicating that the one in /usr was used, however, if i run 'which nano'; the one in /opt shows up. Isn't 'which' meant to search the path for the default? And why wouldn't a call to 'nano' resolve to the same path? EDIT: I made a work-around by adding the following line to ~/.profile alias nano='/opt/local/bin/nano'

    Read the article

  • Ways to polling server status

    - by Yijinsei
    Hi guys, I create the same question is stackoverflow, but I was recommended to post my question here. So I apologies for those who saw this post twice. I am try to create a JSP page that will show all the status in a group of local servers. Currently I create a schedule class that will constantly poll to check the status of the server with 30 second interval, with 5 second delay to wait for each server reply, and provide the JSP page with the information. However I find this way to be not accurate as it will take some time before the information of the schedule class to be updated. Do you guys have a better way to check the status of several server within a local network?

    Read the article

  • How to assign permissions to ApplicationPoolIdentity account

    - by Triynko
    In IIS 7 on Windows Server 2008, application pools can be run as the "ApplicationPoolIdentity" account instead of the NetworkService account. How do I assign permissions to this "ApplicationPoolIdentity" account. It does not appear as a local user on the machine. It does not appear as a group anywhere. Nothing remotely like it appears anywhere. When I browse for local users, groups, and built-in accounts, it does not appear in the list, nor does anything similar appear in the list. What is going on? I'm not the only one with this problem: see Trouble with ApplicationPoolIdentity in IIS 7.5 + Windows 7 for an example. "This is unfortunately a limitation of the object picker on Windows Server 2008/Windows Vista - as several people have discovered it already, you can still manipulate the ACL for the app-pool identity using command line tools like icacls."

    Read the article

  • How to run node.js app on port 80? Are processes blocking my port?

    - by Lucas
    I believe the port 80 on my remote instance is blocked, and I am trying to run a node.js app using port 80. I have experimented with ports 3000 and 3002, and both ports are working fine, but I get an error when running on port 80. I suspect port 80 is blocked from my output of netstat -an below, but how can I find the process id's of the addresses that are blocking port 80 below? [lucas@ecoinstance]~/node/nodetest1$ netstat -an Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN tcp 0 0 0.0.0.0:3002 0.0.0.0:* LISTEN tcp 0 0 127.0.0.1:27017 127.0.0.1:51108 ESTABLISHED tcp 0 0 127.0.0.1:51106 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51106 ESTABLISHED tcp 0 0 127.0.0.1:51107 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:3002 174.61.171.61:36583 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51109 ESTABLISHED tcp 0 0 10.240.241.116:42423 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51108 127.0.0.1:27017 ESTABLISHED tcp 0 532 10.240.241.116:22 174.61.171.61:56824 ESTABLISHED tcp 0 0 127.0.0.1:27017 127.0.0.1:51107 ESTABLISHED tcp 0 0 10.240.241.116:42412 169.254.169.254:80 ESTABLISHED tcp 0 0 127.0.0.1:51109 127.0.0.1:27017 ESTABLISHED tcp 0 0 127.0.0.1:51105 127.0.0.1:27017 ESTABLISHED tcp 0 0 10.240.241.116:42422 169.254.169.254:80 TIME_WAIT tcp 0 0 127.0.0.1:27017 127.0.0.1:51105 ESTABLISHED tcp6 0 0 :::22 :::* LISTEN udp 0 0 0.0.0.0:49948 0.0.0.0:* udp 0 0 0.0.0.0:68 0.0.0.0:* udp 0 0 10.240.241.116:123 0.0.0.0:* udp 0 0 127.0.0.1:123 0.0.0.0:* udp 0 0 0.0.0.0:123 0.0.0.0:* udp6 0 0 :::12151 :::* udp6 0 0 :::123 :::* Active UNIX domain sockets (servers and established) Proto RefCnt Flags Type State I-Node Path unix 2 [ ACC ] STREAM LISTENING 405680 /tmp/ssh-KdkxJfFLpKTC/agent.22 813 unix 2 [ ACC ] STREAM LISTENING 408230 /tmp/ssh-ofUeNNEwAqtP/agent.22 243 unix 2 [ ACC ] STREAM LISTENING 416227 /tmp/mongodb-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 /run/udev/control unix 7 [ ] DGRAM 5286 /dev/log unix 2 [ ACC ] STREAM LISTENING 5318 /var/run/acpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 /tmp//tmux-1000/default unix 2 [ ACC ] STREAM LISTENING 414450 /var/run/dbus/system_bus_socke And here is the log when trying to run on port 80 with node.js: [lucas@ecoinstance]~/node/nodetest1$ npm start > [email protected] start /home/lucas/node/nodetest1 > node ./bin/www events.js:72 throw er; // Unhandled 'error' event ^ Error: listen EACCES at errnoException (net.js:904:11) at Server._listen2 (net.js:1023:19) at listen (net.js:1064:10) at Server.listen (net.js:1138:5) at Function.app.listen (/home/lucas/node/nodetest1/node_modules/express/lib/applicati on.js:532:24) at Object.<anonymous> (/home/lucas/node/nodetest1/bin/www:7:18) at Module._compile (module.js:456:26) at Object.Module._extensions..js (module.js:474:10) at Module.load (module.js:356:32) at Function.Module._load (module.js:312:12) npm ERR! [email protected] start: `node ./bin/www` npm ERR! Exit status 8 npm ERR! npm ERR! Failed at the [email protected] start script. npm ERR! This is most likely a problem with the nodetest1 package, npm ERR! not with npm itself. npm ERR! Tell the author that this fails on your system: npm ERR! node ./bin/www npm ERR! You can get their info via: npm ERR! npm owner ls nodetest1 npm ERR! There is likely additional logging output above. npm ERR! System Linux 3.13-0.bpo.1-amd64 npm ERR! command "/usr/local/bin/node" "/usr/local/bin/npm" "start" npm ERR! cwd /home/lucas/node/nodetest1 npm ERR! node -v v0.10.28 npm ERR! npm -v 1.4.9 npm ERR! code ELIFECYCLE npm ERR! npm ERR! Additional logging details can be found in: npm ERR! /home/lucas/node/nodetest1/npm-debug.log npm ERR! not ok code 0 And sudo netstat -lnp does not return any matching port 80's: [lucas@ecoinstance]~/node/nodetest1$ sudo netstat -lnp [48/648] Active Internet connections (only servers) Proto Recv-Q Send-Q Local Address Foreign Address State PID/Progr am name tcp 0 0 127.0.0.1:27017 0.0.0.0:* LISTEN 29160/mon god tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN 1976/sshd tcp6 0 0 :::22 :::* LISTEN 1976/sshd udp 0 0 0.0.0.0:49948 0.0.0.0:* 1604/dhcl ient udp 0 0 0.0.0.0:68 0.0.0.0:* 1604/dhcl ient udp 0 0 10.240.241.116:123 0.0.0.0:* 2076/ntpd udp 0 0 127.0.0.1:123 0.0.0.0:* 2076/ntpd udp 0 0 0.0.0.0:123 0.0.0.0:* 2076/ntpd udp6 0 0 :::12151 :::* 1604/dhcl ient udp6 0 0 :::123 :::* 2076/ntpd Active UNIX domain sockets (only servers) Proto RefCnt Flags Type State I-Node PID/Program name Path unix 2 [ ACC ] STREAM LISTENING 405680 22814/ssh-agent /tmp/ssh-K dkxJfFLpKTC/agent.22813 unix 2 [ ACC ] STREAM LISTENING 408230 24049/ssh-agent /tmp/ssh-o fUeNNEwAqtP/agent.22243 unix 2 [ ACC ] STREAM LISTENING 416227 29160/mongod /tmp/mongo db-27017.sock unix 2 [ ACC ] SEQPACKET LISTENING 3692 284/udevd /run/udev/ control unix 2 [ ACC ] STREAM LISTENING 5318 1798/acpid /var/run/a cpid.socket unix 2 [ ACC ] STREAM LISTENING 16170 5177/tmux /tmp//tmux -1000/default unix 2 [ ACC ] STREAM LISTENING 414450 28213/dbus-daemon /var/run/d bus/system_bus_socket unix 2 [ ACC ] STREAM LISTENING 404225 22324/1 /tmp/ssh-9 TlDmu4bjl/agent.22324

    Read the article

  • Problem with installing sqlite3 module for python 2.6 on an ubuntu system

    - by Hoang
    I need to run the sqlite3 module on python 2.6 in an ubuntu system. How do I install this module for Python 2.6? Somehow I don't have this module, it raises the error: >>> import sqlite3 Traceback (most recent call last): File "<stdin>", line 1, in <module> File "/usr/local/lib/python2.6/sqlite3/__init__.py", line 24, in <module> from dbapi2 import * File "/usr/local/lib/python2.6/sqlite3/dbapi2.py", line 27, in <module> from _sqlite3 import * ImportError: No module named _sqlite3

    Read the article

  • Taking web sites offline for demonstration

    While working in software development in general, and in web development for a couple of customers it is quite common that it is necessary to provide a test bed where the client is able to get an image, or better said, a feeling for the visions and ideas you are talking about. Usually here at IOS Indian Ocean Software Ltd. we set up a demo web site on one of our staging servers, and provide credentials to the customer to access and review our progress and work ad hoc. This gives us the highest flexibility on both sides, as the test bed is simply online and available 24/7. We can update the structure, the UI and data at any time, and the client is able to view it as it suits best for her/him. Limited or lack of online connectivity But what is going to happen when your client is not capable to be online - no matter for what reasons; here are some more obvious ones: No internet connection (permanently or temporarily) Expensive connection, ie. mobile data package, stay at a hotel, etc. Presentation devices at an exhibition, ie. using tablets or iPads Being abroad for a certain time, and only occasionally online No network coverage, especially on mobile Bad infrastructure, like ie. in Third World countries Providing a catalogue on CD or USB pen drive Anyway, it doesn't matter really. We should be able to provide a solution for the circumstances of our customers. Presentation during an exhibition Recently, we had the following request from a customer: Is it possible to let us have a desktop version of ResortWork.co.uk that we can use for demo purposes at the forthcoming Ski Shows? It would allow us to let stand visitors browse the sites on an iPad to view jobs and training directory course listings. Yes, sure we can do that. Eventually, you might think why don't they simply use 3G enabled iPads for that purpose? As stated above, there might be several reasons for that - low coverage, expensive data packages, etc. Anyway, it is not a question on how to circumvent the request but to deliver a solution to that. Possible solutions... or not? We already did offline websites earlier, and even established complete mirrors of one or two web sites on our systems. There are actually several possibilities to handle this kind of request, and it mainly depends on the system or device where the offline site should be available on. Here, it is clearly expressed that we have to address this on an Apple iPad, well actually, I think that they'd like to use multiple devices during their exhibitions. Following is an overview of possible solutions depending on the technology or device in use, and how it can be done: Replication of source files and database The above mentioned web site is running on ASP.NET, IIS and SQL Server. In case that a laptop or slate runs a Windows OS, the easiest way would be to take a snapshot of the source files and database, and transfer them as local installation to those Windows machines. This approach would be fully operational on the local machine. Saving pages for offline usage This is actually a quite tedious job but still practicable for small web sites Tool based approach to 'harvest' the web site There quite some tools in the wild that could handle this job, namely wget, httrack, web copier, etc. Screenshots bundled as PDF document Not really... ;-) Creating screencast or video Simply navigate through your website and record your desktop session. Actually, we are using this kind of approach to track down difficult problems in order to see and understand exactly what the user was doing to cause an error. Of course, this list isn't complete and I'd love to get more of your ideas in the comments section below the article. Preparations for offline browsing The original website is dynamically and data-driven by ASP.NET, and looks like this: As we have to put the result onto iPads we are going to choose the tool-based approach to 'download' the whole web site for offline usage. Again, depending on the complexity of your web site you might have to check which of the applications produces the best results for you. My usual choice is to use wget but in this case, we run into problems related to the rewriting of hyperlinks. As a consequence of that we opted for using HTTrack. HTTrack comes in different flavours, like console application but also as either GUI (WinHTTrack on Windows) or Web client (WebHTTrack on Linux/Unix/BSD). Here's a brief description taken from the original website about HTTrack: HTTrack is a free (GPL, libre/free software) and easy-to-use offline browser utility. It allows you to download a World Wide Web site from the Internet to a local directory, building recursively all directories, getting HTML, images, and other files from the server to your computer. HTTrack arranges the original site's relative link-structure. Simply open a page of the "mirrored" website in your browser, and you can browse the site from link to link, as if you were viewing it online. And there is an extensive documentation for all options and switches online. General recommendation is to go through the HTTrack Users Guide By Fred Cohen. It covers all the initial steps you need to get up and running. Be aware that it will take quite some time to get all the necessary resources down to your machine. Actually, for our customer we run the tool directly on their web server to avoid unnecessary traffic and bandwidth. After a couple of runs and some additional fine-tuning - explicit inclusion or exclusion of various external linked web sites - we finally had a more or less complete offline version available. A very handsome feature of HTTrack is the error/warning log after completing the download. It contains some detailed information about errors that appeared on the pages and the links within the pages that have been processed. Error: "Bad Request" (400) at link www.resortwork.co.uk/job-details_Ski_hire:tech_or_mgr_or_driver_37854.aspx (from www.resortwork.co.uk/Jobs_A_to_Z.aspx)Error: "Not Found" (404) at link www.247recruit.net/images/applynow.png (from www.247recruit.net/css/global.css)Error: "Not Found" (404) at link www.247recruit.net/activate.html (from www.247recruit.net/247recruit_tefl_jobs_network.html) In our situation, we took the records of HTTP 400/404 errors and passed them to the web development department. Improvements are to be expected soon. ;-) Quality assurance on the full-featured desktop Unfortunately, the generated output of HTTrack was still incomplete but luckily there were only images missing. Being directly on the web server we simply copied the missing images from the original source folder into our offline version. After that, we created an archive and transferred the file securely to our local workspace for further review and checks. From that point on, it wasn't necessary to get any more files from the original web server, and we could focus ourselves completely on the process of browsing and navigating through the offline version to isolate visual differences and functional problems. As said, the original web site runs on ASP.NET Web Forms and uses Postback calls for interaction like search, pagination and partly for navigation. This is the main field of improving the offline experience. Of course, same as for standard web development it is advised to test with various browsers, and strangely we discovered that the offline version looked pretty good on Firefox, Chrome and Safari, but not in Internet Explorer. A quick look at the HTML source shed some light on this, and there are conditional CSS inclusions based on the user agent. HTTrack is not acting as Internet Explorer and so we didn't have the necessary overrides for this browser. Not problematic after all in our case, but you might have to pay attention to this and get the IE-specific files explicitly. And while having a view at the source code, we also found out that HTTrack actually modifies the generated HTML output. In several occasions we discovered that <div> elements were converted into <table> constructs for no obvious reason; even nested structures. Search 'e'nd destroy - sed (or Notepad++) to the rescue During our intensive root cause analysis for a couple of HTML/CSS problems that needed some extra attention it is very helpful to be familiar with any editor that allows search and replace over multiple files like, ie. sed - stream editor for filtering and transforming text on Linux or my personal favourite Notepad++ on Windows. This allowed us to quickly fix a lot of anchors with onclick attributes and Javascript code that was addressed to ASP.NET files instead of their generated HTML counterparts, like so: grep -lr -e '.aspx' * | xargs sed -e 's/.aspx/.html?/g' The additional question mark after the HTML extension helps to separate the query string from the actual target and solved all our missing hyperlinks very fast. The same can be done in Notepad++ on Windows, too. Just use the 'Replace in files' feature and you are settled. Especially, in combination with Regular Expressions (regex). Landscape of browsers Okay, after several runs of HTML/CSS code analysis, searching and replacing some strings in a pool of more than 4.000 files, we finally had a very good match of an offline browsing experience in Firefox and Chrome on Linux. Next, we transferred that modified set of files to a Windows 8 machine for review on Firefox, Chrome and Internet Explorer 7 to 10, and a Mac mini running Mac OS X 10.7 to check the output on Safari and again on Chrome. Besides IE, for reasons already mentioned above, the results were identical. And last but not least it was about to check web site on tablets. Please continue to read on the following articles: Taking web sites offline for demonstration on Galaxy Tablet Taking web sites offline for demonstration on iPad

    Read the article

  • ubuntu eth0 not reconnecting after cable unplugged

    - by Alex
    I'm running kubuntu 9.10 w/ gnome, I have a static IP defined in /etc/network/interfaces When I unplugged my network cable and rebooted, then reconnected the network cable I was not able to connect. I tried using sudo ifup eth0, and then ifconfig and it seemed as though the IP address had been assigned and I was connected, but I wasn't. I then did ifdown eth0, and again ifup eth0. For some reason I'm not able to access the network. Furthermore, I also attempted to connect via wlan, and was able to connect to the wireless network, but cannot "see" the network. I can't transfer data or access the internet or anything on the network including the router. How do I resolve this? topsy@monolyth:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:25:1c:df:70 inet addr:192.168.1.145 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:25ff:fe1c:df70/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5720 errors:0 dropped:0 overruns:0 frame:0 TX packets:565 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:378035 (378.0 KB) TX bytes:46832 (46.8 KB) Memory:fe000000-fe020000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) By access the network I mean the local network as well as the internet. topsy@monolyth:~$ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=9.14 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=1.24 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.01 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1.00 ms [snip... all OK, icmp_seq from 5-30, time between 0.981-1.25ms] ^C --- 192.168.1.1 ping statistics --- 30 packets transmitted, 30 received, 0% packet loss, time 29035ms rtt min/avg/max/mdev = 0.971/1.300/9.140/1.458 ms topsy@monolyth:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 root@monolyth:~# cat /etc/resolv.conf # Generated by NetworkManager

    Read the article

  • How to convert laptop drive for use as VMware image?

    - by jnman
    I have a windows laptop that recently died (dead motherboard). It being a 7 year old laptop, I decided to give Apple a try this time around and try to use VMware to access my old data if necessary. In order to do this, I need to convert the physical drive to a VMware image. Googling around, it looks like I might be able to use VMware Convertor to do this. My original intent was to plug the laptop drive into a windows desktop via an external USB enclosure and create the image that way. However, upon further investigation, it looks like VMware Converter only supports converting a local machine (the desktop) or a remote machine (via IP) but not a laptop drive plugged into the local machine. So with that in mind, I'm looking for suggestions and help on how to convert this laptop drive into something I can use on my new Macbook Pro.

    Read the article

  • Automated Error Reporting in .NET Reflector - harnessing the most powerful test rig in existence

    - by Alex.Davies
    I know a testing system that will find more bugs than all the unit testing, integration testing, and QA you could possibly do. And the chances are you're not using it. It's called your users. It's a cliché that you should test so that you find your bugs rather than your users. Of course you should. But it's also a cliché that no software is ever shipped bug-free. Lost cause? No, opportunity! I think .NET Reflector 6 is pretty stable. In fact I know exactly how stable it is, because some (surprisingly high) proportion of its users tell me every time it crashes: If they press "Send Error Report", I get: And then I fix it. As a rough guess, while a standard stack trace is enough to fix a problem 30% of the time, having all those local variables in the stack trace means I can fix it about 80% of the time. How does this all happen? Did it take ages to code this swish system? Nope, it was one checkbox in SmartAssembly. It adds some clever code to your assembly to capture local variables every time an exception is thrown, and to ask your user to report it to you, with a variety of other useful information. Of course not all bugs show up as exceptions. But if you get used to knowing that SmartAssembly will tell you when an exception happens, you begin to change your coding style. Now, as long as an exception gets thrown in any situation you don't expect, you'll fix it if it ever happens. You'll start throwing exceptions liberally, and stop having to think about whether tiny edge cases are possible, as long as they throw an exception if they happen.

    Read the article

  • Can't connect to smtp (postfix, dovecot) after making a change and trying to change it back

    - by UberBrainChild
    I am using postfix and dovecot along with zpanel and I tried enabling SSL and then turned it off as I did not have SSL configured yet and I realized it was a bit stupid at the time. I am using CentOS 6.4. I get the following error in the mail log. (I changed my host name to "myhostname" and my domain to "mydomain.com") Oct 20 01:49:06 myhostname postfix/smtpd[4714]: connect from mydomain.com[127.0.0.1] Oct 20 01:49:16 myhostname postfix/smtpd[4714]: fatal: no SASL authentication mechanisms Oct 20 01:49:17 myhostname postfix/master[4708]: warning: process /usr/libexec/postfix/smtpd pid 4714 exit status 1 Oct 20 01:49:17 amyhostname postfix/master[4708]: warning: /usr/libexec/postfix/smtpd: bad command startup -- throttling Reading on forums and similar questions I figured it was just a service that was not running or installed. However I can see that saslauthd is currently up and running on my system and restarting it does not help. Here is my postfix master.cf # # Postfix master process configuration file. For details on the format # of the file, see the Postfix master(5) manual page. # # ***** Unused items removed ***** # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - n - - smtpd # -o content_filter=smtp-amavis:127.0.0.1:10024 # -o receive_override_options=no_address_mappings pickup fifo n - n 60 1 pickup submission inet n - - - - smtpd -o content_filter= -o receive_override_options=no_header_body_checks cleanup unix n - n - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - n 300 1 oqmgr tlsmgr unix - - n 1000? 1 tlsmgr rewrite unix - - n - - trivial-rewrite bounce unix - - n - 0 bounce defer unix - - n - 0 bounce trace unix - - n - 0 bounce verify unix - - n - 1 verify flush unix n - n 1000? 0 flush proxymap unix - - n - - proxymap smtp unix - - n - - smtp smtps inet n - - - - smtpd # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - n - - smtp -o fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - n - - showq error unix - - n - - error discard unix - - n - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - n - - lmtp anvil unix - - n - 1 anvil scache unix - - n - 1 scache # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # ==================================================================== maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/local/bin/maildrop -d ${recipient} uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=foo argv=/usr/local/sbin/bsmtp -f $sender $nexthop $recipient # # spam/virus section # smtp-amavis unix - - y - 2 smtp -o smtp_data_done_timeout=1200 -o disable_dns_lookups=yes -o smtp_send_xforward_command=yes 127.0.0.1:10025 inet n - y - - smtpd -o content_filter= -o smtpd_helo_restrictions= -o smtpd_sender_restrictions= -o smtpd_recipient_restrictions=permit_mynetworks,reject -o mynetworks=127.0.0.0/8 -o smtpd_error_sleep_time=0 -o smtpd_soft_error_limit=1001 -o smtpd_hard_error_limit=1000 -o receive_override_options=no_header_body_checks -o smtpd_bind_address=127.0.0.1 -o smtpd_helo_required=no -o smtpd_client_restrictions= -o smtpd_restriction_classes= -o disable_vrfy_command=no -o strict_rfc821_envelopes=yes # # Dovecot LDA dovecot unix - n n - - pipe flags=DRhu user=vmail:mail argv=/usr/libexec/dovecot/deliver -d ${recipient} # # Vacation mail vacation unix - n n - - pipe flags=Rq user=vacation argv=/var/spool/vacation/vacation.pl -f ${sender} -- ${recipient} And here is dovecot ## ## Dovecot config file ## listen = * disable_plaintext_auth = no protocols = imap pop3 lmtp sieve auth_mechanisms = plain login passdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } userdb { driver = sql } userdb { driver = sql args = /etc/zpanel/configs/dovecot2/dovecot-mysql.conf } mail_location = maildir:/var/zpanel/vmail/%d/%n first_valid_uid = 101 #last_valid_uid = 0 first_valid_gid = 12 #last_valid_gid = 0 #mail_plugins = mailbox_idle_check_interval = 30 secs maildir_copy_with_hardlinks = yes service imap-login { inet_listener imap { port = 143 } } service pop3-login { inet_listener pop3 { port = 110 } } service lmtp { unix_listener lmtp { #mode = 0666 } } service imap { vsz_limit = 256M } service pop3 { } service auth { unix_listener auth-userdb { mode = 0666 user = vmail group = mail } # Postfix smtp-auth unix_listener /var/spool/postfix/private/auth { mode = 0666 user = postfix group = postfix } } service auth-worker { } service dict { unix_listener dict { mode = 0666 user = vmail group = mail } } service managesieve-login { inet_listener sieve { port = 4190 } service_count = 1 process_min_avail = 0 vsz_limit = 64M } service managesieve { } lda_mailbox_autocreate = yes lda_mailbox_autosubscribe = yes protocol lda { mail_plugins = quota sieve postmaster_address = [email protected] } protocol imap { mail_plugins = quota imap_quota trash imap_client_workarounds = delay-newmail } lmtp_save_to_detail_mailbox = yes protocol lmtp { mail_plugins = quota sieve } protocol pop3 { mail_plugins = quota pop3_client_workarounds = outlook-no-nuls oe-ns-eoh } protocol sieve { managesieve_max_line_length = 65536 managesieve_implementation_string = Dovecot Pigeonhole managesieve_max_compile_errors = 5 } dict { quotadict = mysql:/etc/zpanel/configs/dovecot2/dovecot-dict-quota.conf } plugin { # quota = dict:User quota::proxy::quotadict quota = maildir:User quota acl = vfile:/etc/dovecot/acls trash = /etc/zpanel/configs/dovecot2/dovecot-trash.conf sieve_global_path = /var/zpanel/sieve/globalfilter.sieve sieve = ~/dovecot.sieve sieve_dir = ~/sieve sieve_global_dir = /var/zpanel/sieve/ #sieve_extensions = +notify +imapflags sieve_max_script_size = 1M #sieve_max_actions = 32 #sieve_max_redirects = 4 } log_path = /var/log/dovecot.log info_log_path = /var/log/dovecot-info.log debug_log_path = /var/log/dovecot-debug.log mail_debug=yes ssl = no Does anyone have any ideas or tips on what I can try to get this working? Thanks for all the help EDIT: Output of postconf -n alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases broken_sasl_auth_clients = yes command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 delay_warning_time = 4 disable_vrfy_command = yes html_directory = no inet_interfaces = all mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = localhost.$mydomain, localhost mydomain = control.yourdomain.com myhostname = control.yourdomain.com mynetworks = all newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.2.2/README_FILES recipient_delimiter = + relay_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-relay_domains_maps.cf sample_directory = /usr/share/doc/postfix-2.2.2/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop smtp_use_tls = no smtpd_client_restrictions = smtpd_data_restrictions = reject_unauth_pipelining smtpd_helo_required = yes smtpd_helo_restrictions = smtpd_recipient_restrictions = permit_sasl_authenticated, permit_mynetworks, reject_unauth_destination, reject_non_fqdn_sender, reject_non_fqdn_recipient, reject_unknown_recipient_domain smtpd_sasl_auth_enable = yes smtpd_sasl_local_domain = $myhostname smtpd_sasl_path = private/auth smtpd_sasl_security_options = noanonymous smtpd_sasl_type = dovecot smtpd_sender_restrictions = smtpd_use_tls = no soft_bounce = yes transport_maps = hash:/etc/postfix/transport unknown_local_recipient_reject_code = 550 virtual_alias_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_alias_maps.cf, regexp:/etc/zpanel/configs/postfix/virtual_regexp virtual_gid_maps = static:12 virtual_mailbox_base = /var/zpanel/vmail virtual_mailbox_domains = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_domains_maps.cf virtual_mailbox_maps = proxy:mysql:/etc/zpanel/configs/postfix/mysql-virtual_mailbox_maps.cf virtual_minimum_uid = 101 virtual_transport = dovecot virtual_uid_maps = static:101

    Read the article

  • Remote Desktop doesn't recognize username change

    - by Unsigned
    There are two active user accounts on the Windows 7 Professional server, Owner, and Guest. Owner is an Administrator with a password. Guest is the default Guest account with no password, but has been added to Remote Desktop Users. When attempting to connect to the server via a Windows 7 Professional client, Guest accepts RD connections fine, however, Owner throws an error "Unable to connect to Local Security Authority." I created a new Administrator account, named Remote, with the same password as Owner. Remote Desktop worked perfectly. I then deleted Owner, and renamed Remote to Owner. Now, Remote Desktop gives the same error ("Unable to connect to Local Security Authority") when attempting to log into the new Owner. However, attempting to log into Remote (even though it was renamed to Owner), works. Completely at a loss here, what is going on? Why won't Owner work, and why does Remote Desktop still use the old name on the renamed account?

    Read the article

  • Postfix tutorial inconsistency

    - by Desmond Hume
    I'm following this tutorial to setup a Postfix/Dovecot mail server with Postfix Admin as a web front end. As regards directory structure for virtual mail users, the author of the tutorial writes: Virtual mail users are those that do not exist as Unix system users. They thus don't use the standard Unix methods of authentication or mail delivery and don't have home directories. That is how we are managing things here: mail users are defined in the database created by Postfix Admin rather than existing as system users. Mail will be kept in subfolders per domain and account under /var/vmail - e.g. [email protected] will have a mail directory of /var/vmail/example.com/me. But when he gives instructions about configuring Postfix Admin, he suggests this to be contained by Postfix Admin's config.inc.php: // Mailboxes // If you want to store the mailboxes per domain set this to 'YES'. // Examples: // YES: /usr/local/virtual/domain.tld/[email protected] // NO: /usr/local/virtual/[email protected] $CONF['domain_path'] = 'NO'; Is there an inconsistency?

    Read the article

  • MySQL Workbench sends computer name with login not IP

    - by Android Addict
    I am attempting to connect MySQLWorkbench to a remote MySQL Server. The server has granted access to user@IPAddress However, when I try to connect MySQLWorkbench, it sends user@computername instead. How do I configure the connection to use the IP address instead in MySQLWorkbench? Reference: The remote server is on the local network, so I need to use the local IP address assigned to my client. EDIT What I have tried so far: from the server: mysql -u user@IPAddress -p --host=(ServerIPAddress) Returns: mysql> So that tells me the user account is operational. Furthermore, I confirmed it exists using: select user from mysql.user; returning a table of all users, of which the user I am using is present. I have also opened the port 3306: sbin/iptables -A INPUT -i eth0 -s clientIPAddress -p tcp --destination-port3306 -j ACCEPT Still I encounter Access Denied

    Read the article

  • Database Replication check script not running

    - by Tarun
    I'm trying to create a Database Replication checking script but I'm getting error while executing it. Here is the script #!/bin/bash PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin export PATH #Server Name Server="Test Server" #My Sql Username and Password User=root Password="a" #Maximum Slave Time Delay Delay="60" #File Path to store error and email the same Log_File=/tmp/replicationcheck.txt #Email Settings Subject="$Server Replication Error" Sender_Name=TestServer Recipients="[email protected]" #Mail Alert Function mailalert(){ sendmail -F $Sender_Name -it <<END_MESSAGE To: $Recipients Subject: $Subject $Message_Replication_Error `/bin/cat $Log_File` END_MESSAGE } #Show Slave Status Show_Slave_Status=`echo "show slave status \G;" | mysql -u $User -p$Password 2>&1` #Getting list of queries in mysql $Show_Slave_Status | grep "Last_" > $Log_File #Check if slave running $Show_Slave_Status | grep "Slave_IO_Running: No" if [ "$?" -eq "0" ]; then Message_Replication_Error="$Server Replication error please check. The Slave_IO_Running state is No." mailalert exit 1 else $Show_Slave_Status | grep "Slave_IO_Running: Connecting" if [ "$?" -eq "0" ]; then Message_Replication_Error="$Server Replication error please check. The Slave_IO_Running state is Connecting." mailalert exit 1 fi fi #Check if replication delayed Seconds_Behind_Master=$Show_Slave_Status | grep "Seconds_Behind_Master" | awk -F": " {' print $2 '} if [ "$Seconds_Behind_Master" -ge "$Delay" ]; then Message_Replication_Error="Replication Delayed by $Seconds_Behind_Master." mailalert else if [ "$Seconds_Behind_Master" = "NULL" ]; then Message_Replication_Error="$Server Replication error please check. The Seconds_Behind_Master state is NULL." mailalert fi fi

    Read the article

  • Add a remote printer over ssh on OSX?

    - by GradGuy
    I have a printer at my office that is connected to a local network and my linux box at work can see it on the network. However, it is not visible to the outside world. I was trying to figure out a way to add it on my MacAir and so far have found two options: 1) Using ssh tunnel via CLI: cat file.pdf | ssh user@linuxbox lpr. 2) With Chrome installed on the linux box, using the Google Cloud Print service on the remote box and automator on my MacAir I can add the printer to Cmnd+p dialog box I like the first method since it does not require Chrome be installed and the second one since it allows to use Cmnd+p inside all applications. I was wondering if there is a way to combine by using automator to run the first command line script. What about port forwarding? Is it possible to forward the remote CUPS 631 port to a local port and then add the printer normally? What other methods would you recommend?

    Read the article

  • How can I run this script on startup, restart, and shutdown?

    - by Exeleration-G
    I'm using Ubuntu 11.10. I've written a script, that synchronises a directory in ~ with a directory on /dev/sda4, using Unison. Before, I had this script running every five minutes with no problems, using crontab. Right now, I want to execute this script at startup, restart and shutdown only. This is what the script looks like: #!/bin/bash unison -perms 0 -batch "/mnt/Data/Syncfolder/" "/home/myname/Syncfolder/" My crontab configuration was as follows: m h dom mon dow command 0,5,10,15,20,25,30,35,40,45,50,55 * * * * sh /usr/local/bin/s4lj.bash Note that I copied the script from ~ to /usr/local/bin/ first, to avoid root problems. I've read How to execute script on shutdown? and How to write an init script that will execute an existing start script?. After doing that, I've done this: I've made s4lj.bash executable, and then copied it to /etc/init.d/. For startup, I've made a symlink in /etc/rc2.d/ to /etc/init.d/s4lj.bash, and renamed it to S70s4lj.bash. For restart, I've made a symlink in /etc/rc6.d/ to /etc/init.d/s4lj.bash, and renamed it to K70s4lj.bash. For shutdown, I've made a symlink in /etc/rc0.d/ to /etc/init.d/s4lj.bash, and renamed it to K70s4lj.bash. Still, the script won't be run in any of these situations. How can I make the script get executed? I'd be happiest with a proper *.conf file in /etc/init. Thanks in advance.

    Read the article

  • Virtual DNS recommended setup...

    - by luison
    Hi. We are new to virtualization which we are setting up with Proxmox VE (OpenVZ + KVM). I am a bit lost about the recommended DNS forwarder config specially in the OpenVZ (Virtuosso type) of enviroiment. Our intention was to have a small dnsmasq running in one of the VM acting as backup DHCP server and serving our in-office local addresses (and PCs) by an additional resolve.conf file which dnsmasq supports, but I've read that all VM should share DNS pointing to the host machine in which case it would make more sense having it there. My problem is that I would like to have as least as possible apps in the host so a reinstall of the environment (porxmox ve) and a machine restore can be as quick as possible. Does anyone have a similar setup? Does it make sense to have the 1st virtual machine running the local dns forwarder? Also... dnsmasq seems to want to have root permissions when running on an OpenVZ container... are there any work arrounds anyone knows for that.

    Read the article

  • Unity3d: calculate the result of a transform without modifying transform object itself

    - by Heisenbug
    I'm in the following situation: I need to move an object in some way, basically rotating it around its parent local position, or translating it in its parent local space (I know how to do this). The amount of rotation and translation is know at runtime (it depends on several factors, the speed of the object, enviroment factors, etc..). The problem is the following: I can perform this transformation only if the result position of the transformed object fit some criterias. An example could be this: the distance between the position before and after the transformation must be less than a given threshold. (Actually the conditions could be several and more complex) The problem is that if I use Transform.Rotate and Transform.Translate methods of my GameObject, I will loose the original Transform values. I think I can't copy the original Transform using instantiate for performance issues. How can I perform such a task? I think I have more or less 2 possibilities: First Don't modify the GameObject position through Transform. Calculate which will be the position after the transform. If the position is legal, modify transform through Translate and Rotate methods Second Store the original transform someway. Transform the object using Translate and Rotate. If the transformed position is illegal, restore the original one.

    Read the article

  • Our Server Rooted but exploit doesnt work?

    - by Salina Odelva
    Hi everyone. My friend's hosting server got rooted and we have traced some of attacker's commands.. We've found some exploits under /tmp/.idc directory.. We've disconnected the server and are now testing some local kernel exploits that the attacker tried on our server. Here is our kernel version: 2.4.21-4.ELsmp #1 SMP We think that he got root access by the modified uselib() local root exploit but the exploit doesn't work! loki@danaria {/tmp}# ./mail -l ./lib [+] SLAB cleanup child 1 VMAs 32768 The exploit hangs like this.. I've waited over 5 minutes but nothing has happened. I've also tried other exploits but they didn't work.. Any ideas? or experimentations with this exploit? Because we need to find the issue and patch our kernel but we can't understand how he used this exploit to get root... Thanks

    Read the article

  • How to edit semi-plaintext file and maintaining character structure?

    - by Raul
    I am using a software (Groupmail from Infacta) that uses exact / absolute %PATHS% for saving some settings in specific semi-plaintext file. This is a really bad idea because you can't move to USER folder, or like my case it does not work after migrating to a new computer with different language. For example: C:\Documents and Settings\USER\Local Settings\Application Data\Infacta is different than C:\Documents and Settings\USER\Configuración local\Datos de programa\Infacta Obviously, the software does not work well. I tried to solve this using Find/Replace the new PATH with Notepad++. While the Groupmail software loads well and shows settings correctly, the software fails when trying to save data on that file. I guess this is because length or number of replaced characters is different and also it corrupt the file. Please could you help me to edit this file maintaining file integrity / structure?

    Read the article

  • Running PHP 5.2 FastCGI + Apache on CentOS 5 issue

    - by Goran
    I am trying to setup 2 versions of PHP on Centos 5.9 using this tutorial: http://linuxplayer.org/2011/05/intall-multiple-version-of-php-on-one-server. I have followed I have installed default 5.4.19, and I was trying to setup another 5.2.17 PHP version to be run with Fast CGI and I followed the second part completely. However, when I try to run http://web2.example.com it returns 500 error message. In the apache log there are only 2 lines that repeat: [notice] mod_fcgid: call /var/www/web2/index.php with wrapper /usr/local/php52/bin/fcgiwrapper.sh and [notice] mod_fcgid: process /var/www/web2/index.php(25250) exit(server exited), terminated by calling exit(), return code: 255 Please note that I had to add .php at the and of the FCGIWrapper because apache would not start without it: FCGIWrapper /usr/local/php52/bin/fcgiwrapper.sh .php Also please note that http://web1.example.com with PHP 5.4.19 is working absolutely fine. Please help. Thank you very much in advance.

    Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >