Search Results

Search found 56081 results on 2244 pages for 'working directory'.

Page 181/2244 | < Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >

  • Alpha plugin in GStreamer not working

    - by Miguel Escriva
    Hi! I'm trying to compose two videos, and I'm using the alpha plug-in to make the white color transparent. To test the alpha plug-in I'm creating the pipeline with gst-launch. The first test I done was: gst-launch videotestsrc pattern=smpte75 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ videotestsrc pattern=snow ! mixer. and it works great! Then I created two videos with those lines: gst-launch videotestsrc pattern=snow ! ffmpegcolorspace ! theoraenc ! oggmux ! filesink location=snow.ogv gst-launch videotestsrc pattern=smpte75 ! ffmpegcolorspace ! theoraenc ! oggmux ! filesink location=bars75.ogv And changed the videotestsrc to a filesrc and it continues working gst-launch filesrc location=bars75.ogv ! decodebin2 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ filesrc location=snow.ogv ! decodebin2 ! alpha ! mixer. But, when I use the ideo I want to compose, I'm not able to make the white color transparent gst-launch filesrc location=video.ogv ! decodebin2 \ ! alpha method=custom target-r=255 target-g=255 target-b=255 angle=10 \ ! videomixer name=mixer ! ffmpegcolorspace ! autovideosink \ filesrc location=snow.ogv ! decodebin2 ! alpha ! mixer. Can you help me? Any idea what is happening? I'm using GStreamer 0.10.28 You can download the test videos from here: http://polimedia.upv.es/pub/gst/gst.zip Thanks in advance, Miguel Escriva

    Read the article

  • Windows Server 2003 IPSec Tunnel Connected, But Not Working (Possibly NAT/RRAS Related)

    - by Kevinoid
    Configuration I have setup a "raw" IPSec tunnel between a Windows Server 2003 (SBS) machine and a Netgear FVG318 according to the instructions in Microsoft KB816514. The configuration is as follows (using the same conventions as the article): NetA | SBS2003 | FVG318 | NetB 10.0.0.0/24 | 216.x.x.x | 69.y.y.y | 10.0.254.0/24 Both the Main Mode and Quick Mode Security Associations are successfully completed and appear in the IP Security Monitor. I am also able to ping the SBS2003 server on its private address from any computer on NetB. The Problem Any traffic sent from a computer on NetA to NetB, or from SBS2003 to NetB (excluding ICMP Ping responses), is sent out on the public network interface outside the IPSec tunnel (no encryption or header authentication, as if the tunnel were not there). Pings sent from a computer on NetB to a computer on NetA successfully reach computers on NetA, but the responses are silently discarded by SBS2003 (they do not go out in the clear and do not generate any encrypted traffic). Possible Solutions Incorrect Configuration I could have mistyped something, somewhere, or KB816514 could be incorrect in some way. I have tried very hard to eliminate the first option. Have re-created the configuration several times, tried tweaking and adjusting all the settings I could without success (most prevent the SA from being established). NAT/RRAS I have seen multiple posts elsewhere suggesting that this could be due to interaction between NAT and the IPSec filters. Possibly the NetA private addresses get rewritten to 216.x.x.x before being compared with the Quick Mode IPSec filters and don't get tunneled because of the mismatch. In fact, The Cable Guy article from June 2005 "TCP/IP Packet Processing Paths" suggests that this is the case, (see step 2 and 4 of the Transit Traffic path). If this is the case, is there a way to exclude NetA-NetB traffic from NAT? Any thoughts, ideas, suggestions, and/or comments are appreciated. Update (2011-06-26) After failing to solve the problem, I resorted to paid Microsoft support. They were unable to solve the problem. Since then I have implemented a solution based on Linux that is working quite well. I will attempt to evaluate any proposed answers as best I can, but current configurations and time constraints will make this slow...

    Read the article

  • Apache2 - mod_expire and mod_rewrite not working in httpd.conf - serving content from tomcat

    - by Ankit Agrawal
    I am using apache2 server running on debian which forwards all the http request to tomcat installed on same machine. I have two files under my /etc/apache2/ folder apache2.conf and httpd.conf I modified httpd.conf file to look like following. # forward all http request on port 80 to tomcat ProxyPass / ajp://127.0.0.1:8009/ ProxyPassReverse / ajp://127.0.0.1:8009/ # gzip text content AddOutputFilterByType DEFLATE text/plain AddOutputFilterByType DEFLATE text/html AddOutputFilterByType DEFLATE text/xml AddOutputFilterByType DEFLATE text/css AddOutputFilterByType DEFLATE text/javascript AddOutputFilterByType DEFLATE application/xml AddOutputFilterByType DEFLATE application/xhtml+xml AddOutputFilterByType DEFLATE application/rss+xml AddOutputFilterByType DEFLATE application/javascript AddOutputFilterByType DEFLATE application/x-javascript DeflateCompressionLevel 9 BrowserMatch ^Mozilla/4 gzip-only-text/html BrowserMatch ^Mozilla/4\.0[678] no-gzip BrowserMatch \bMSIE !no-gzip !gzip-only-text/html # Turn on Expires and mark all static content to expire in a week # unset last modified and ETag ExpiresActive On ExpiresDefault A0 <FilesMatch "\.(jpg|jpeg|png|gif|js|css|ico)$" ExpiresDefault A604800 Header unset Last-Modified Header unset ETag FileETag None Header append Cache-Control "max-age=604800, public" </FilesMatch RewriteEngine On # rewrite all www.example.com/content/XXX-01.js and YYY-01.css files to XXX.js and YYY.css RewriteRule ^content/(js|css)/([a-z]+)-([0-9]+)\.(js|css)$ /content/$1/$2.$4 # remove all query parameters from URL after we are done with it RewriteCond %{THE_REQUEST} ^GET\ /.*\;.*\ HTTP/ RewriteCond %{QUERY_STRING} !^$ RewriteRule .* http://example.com%{REQUEST_URI}? [R=301,L] # rewrite all www.example.com to example.com RewriteCond %{HTTP_HOST} ^www\.example\.com$ [NC] RewriteRule ^(.*)$ http://example.com/$1 [R=301,L] I want to achieve following. forward all traffic to tomcat GZIP all the text content. Put 1 week expiry header to all static files and unset ETag/last modified header. rewrite all js and css file to certain format. remove all the query parameters from URL forward all www.example.com to example.com The problem is only 1 and 2 are working. I tried a lot with many combinations but the expire and rewrite rule (3-6) do not work at all. I also tried moving these rules to apache2.conf and .htaccess files but it didn't work either. It does not give any error but these rules are simple ignored. expires and rewrite modules are ENABLED. Please let me know what should I do to fix this. 1. Do I need to add something else in httpd.conf file (like Options +FollowSymLink) or something else? 2. Do I need to add something in apache2.conf file? 3. Do I need to move these rules to .htaccess file? If yes, what should I write in that file and where should I keep that file? in /etc/apache2/ folder or /var/www/ folder? 4. Any other info to make this work? Thanks, Ankit

    Read the article

  • Optical SPDIF audio from motherboard not working with receiver

    - by simon b
    Hi, I hope someone can help; I can't get my SPDIF optical out working through my receiver and all the responses I can see on the web assume you have a sound card, while I settled for the (seemingly high end) sound on my motherboard (Asus P7P55D-E PRO), which appears to limit some of my options. My set-up is a "new out of the box" one and is: *Windows 7 PC (using PowerDVD10 for DVDs/Blurays and Windows media player for music) *Asus P7P55D-E PRO motherboard - has 8-channel audio TRS jacks and SPDIF optical and coaxial out *An old Yamaha receiver, whose only multi-channel input options are optical in and 6 channel RCA in. However, it still can handle DTS and DD *Boston Acoustic Soundware XS 5.1 speakers I've currently got the SPDIF optical out from the motherboard connected to the in on my receiver, have SPDIF enabled in the sound menu and the light is glowing red down the fibre. But I'm getting no sound at all. What I want is to be able to play DVDs/BluRays in 5.1 but also to be able to play music in multi-channel mode (even though I know this will be "fake" multichannel; it's more about where I sit in the room and my requirement to use the sub because the Boston is a satellite/sub set-up) My questions are: *Will optical work at all for multi-channel? THe latest posts I can see suggest it does but some people seem to say optical only outputs stereo. Whom to believe? *Even if it does work, I've read that I have to disable AC-3 decoding, or make various other changes, which don't seem to be possible without the menu options that a sound-card brings. Is the motherboard-only option just too inflexible? *Although my SPDIF device is enabled in the sound menu, it insists under "Jack information" that it is a "rear panel RCA jack", when of course it is not (both TOSLINK and rCA jacks do exist). Has the PC just forgotten that it has an optical? *I think I could relatively easily connect the 8-channel 3.5mm TRS jacks to my receiver 6-ch input jacks by way of TRS/RCA cables, but would that not stop me from being able to play music from media-player in multi-channel mode, as I'm not sure the motherboard can cope *Or do I need to bite the bullet and buy a sound-card? And if so, how can I be sure the one I get doesn't have the same problem? Any thoughts gratefully received, Cheers, simon

    Read the article

  • Apache Mod_rewrite rule working on one server, but not another

    - by Mason
    I am using mod_jk and mod_rewrite on httpd 2.2.15. I have a rule.... RewriteCond %{REQUEST_URI} !^/video/play\.xhtml.* RewriteRule ^/video/(.*) /video/play.xhtml?vid=$1 [PT] I just want to rewrite something like /video/videoidhere to /video/play.xhtml?vid=videoidhere This works perfectly on my developer machine, but on production I get a 404 (generated by Jboss, not Apache). here is the tail of access.log and rewrite.log on prod (broken). the rewrite.log is exactly the same on dev(working) applying pattern '^/video/(.*)' to uri '/video/46279d4daf5440b2844ec831413dcc3b' RewriteCond: input='/video/46279d4daf5440b2844ec831413dcc3b' pattern='!^/video/play\.xhtml.*' => matched rewrite '/video/46279d4daf5440b2844ec831413dcc3b' -> '/video/play.xhtml?vid=46279d4daf5440b2844ec831413dcc3b' split uri=/video/play.xhtml?vid=46279d4daf5440b2844ec831413dcc3b -> uri=/video/play.xhtml, args=vid=46279d4daf5440b2844ec831413dcc3b forcing '/video/play.xhtml' to get passed through to next API URI-to-filename handler "GET /video/46279d4daf5440b2844ec831413dcc3b HTTP/1.1" 404 420 "-" "Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.6) Gecko/20100628 Ubuntu/10.04 (lucid) Firefox/3.6.6" I can access http://www.fivi.com/video/play.xhtml?vid=46279d4daf5440b2844ec831413dcc3b but not /video/46279d4daf5440b2844ec831413dcc3b Both server are even using the EXACT same httpd.conf, and modules. I built Apache with... ./configure --prefix /usr/local/apache2.2.15 --enable-alias --enable-rewrite --enable-cache --enable-disk_cache --enable-mem_cache --enable-ssl --enable-deflate Thanks, Mason ----UPDATE---- -mod-jk.conf JkWorkersFile /usr/local/apache2.2.15/conf/workers.properties JkLogFile /var/log/mod_jk.log JkLogLevel info JkLogStampFormat "[%a %b %d %H:%M:%S %Y]" JkOptions +ForwardKeySize +ForwardURICompatUnparsed -ForwardDirectories JkRequestLogFormat "%w %V %T" JkShmFile run/jk.shm <Location /jkstatus> JkMount status Order deny,allow Deny from all Allow from 127.0.0.1 </Location> -workers.properties worker.node1.port=8009 worker.node1.host=75.102.10.74 worker.node1.type=ajp13 worker.node1.lbfactor=20 worker.node1.ping_mode=A #As of mod_jk 1.2.27 worker.node2.port=8009 worker.node2.host=75.102.10.75 worker.node2.type=ajp13 worker.node2.lbfactor=10 worker.node2.ping_mode=A #As of mod_jk 1.2.27 worker.loadbalancer.type=lb worker.loadbalancer.balance_workers=node2,node1 worker.loadbalancer.sticky_session=True worker.status.type=status -httpd.conf ServerName www.fivi.com:80 Include /usr/local/apache2.2.15/conf/mod-jk.conf NameVirtualHost * <VirtualHost *> ServerName * DocumentRoot /usr/local/apache2/htdocs JkUnMount /* loadbalancer RedirectMatch 301 /(.*) http://www.fivi.com/$1 </VirtualHost> <VirtualHost *> ServerName www.fivi.com ServerAlias www.fivi.com images.fivi.com JkMount /* loadbalancer JkMount / loadbalancer [root@fivi conf]# /usr/local/apache2.2.15/bin/httpd -M Loaded Modules: core_module (static) authn_file_module (static) authn_default_module (static) authz_host_module (static) authz_groupfile_module (static) authz_user_module (static) authz_default_module (static) auth_basic_module (static) cache_module (static) disk_cache_module (static) mem_cache_module (static) include_module (static) filter_module (static) deflate_module (static) log_config_module (static) env_module (static) headers_module (static) setenvif_module (static) version_module (static) ssl_module (static) mpm_prefork_module (static) http_module (static) mime_module (static) status_module (static) autoindex_module (static) asis_module (static) cgi_module (static) negotiation_module (static) dir_module (static) actions_module (static) userdir_module (static) alias_module (static) rewrite_module (static) so_module (static) jk_module (shared) Syntax OK

    Read the article

  • My facebook blocking ACL has stopped working

    - by Josh
    This probably very simple. This was setup before I arrived, and has been working to block facebook. I recently eliminated some static port forwarding on this 2691 (as in, I don't think anything else has changed), and now facebook is once again accessible. Why is this list not doing what it seems like it should be doing (and was doing)? Would an extended outbound ACL be more appropriate (I think that would have been my thought if I had been tasked with creating this in the first place)? Something different? I've included below what I believe are the relevant parts of the config. interface FastEthernet0/0 ip address my.pub.ip.add my.ip.add.msk ip access-group 1 in ip nat outside ip virtual-reassembly duplex auto speed auto access-list 1 deny 69.171.224.0 0.0.31.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 deny 66.220.144.0 0.0.15.255 access-list 1 deny 69.63.176.0 0.0.15.255 access-list 1 permit any ip nat inside source list 105 interface FastEthernet0/0 overload access-list 105 deny ip 192.168.0.0 0.0.0.255 192.168.8.0 0.0.0.255 access-list 105 permit ip 192.168.0.0 0.0.0.255 any access-list 105 permit ip 192.168.1.0 0.0.0.255 any EDIT ACL is once again blocking Facebook. Here is the new definition for those interested... access-list 1 deny 66.220.144.0 0.0.7.255 access-list 1 deny 66.220.152.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.7.255 access-list 1 deny 69.63.176.0 0.0.0.255 access-list 1 deny 69.63.184.0 0.0.7.255 access-list 1 deny 69.171.224.0 0.0.15.255 access-list 1 deny 69.171.239.0 0.0.0.255 access-list 1 deny 69.171.240.0 0.0.15.255 access-list 1 deny 69.171.255.0 0.0.0.255 access-list 1 deny 74.119.76.0 0.0.3.255 access-list 1 deny 173.252.64.0 0.0.31.255 access-list 1 deny 173.252.70.0 0.0.0.255 access-list 1 deny 173.252.96.0 0.0.31.255 access-list 1 deny 204.15.20.0 0.0.3.255 access-list 1 permit any

    Read the article

  • Fast user switching suddenly stopped working on my Windows XP Prof machine

    - by John
    When I start Win XP SP2 I get to the welcome screen with no user names displayed. I then press Alt+Ctrl+Del twice and type in the username and then am able to login to Windows. When I go to user accounts in Control Panel I get the error message cells.item(...) is null or not an object. When I go to computer administration and then local users and groups there are no users listed under users but the groups is listed. I did a windows repair with no luck. I tried doing restore points but it said they didn’t work. Please help? My wife and I have been using fast user switching on out computer for years with no problem. Beginning a few months ago, I started Win XP Prof one day I get to the welcome screen with no user names displayed. I then press Alt+Ctrl+Del twice and type in the username and then am able to login to Windows with an account of owner. When I go to user accounts in Control Panel I get the error message cells.item(...) is null or not an object. When I go to computer administration and then local users and groups there are no users listed under users but the groups are listed. I have done system point restores and imports of exports of the registry I take with import. I have tried everything under safe mode and it makes no difference. This followed a Microsoft update the night before as I left the computer on. I tried to do a restore point but all my restore points failed and could not backout the MS updates. I was working with a fellow from Microsoft and he had me do all kinds of things but to no avail. He seems to think a DLL file is corrupt but which one? Finally in desperation he sent me a new OS XP Prof SP3 disk and I installed it and it wiped my hard drive. Luckily I took an Acronis Image backup first so I easily restored my system. I do not want to do a fresh windows update as it is heavily customized and worked fine up to that point. This has been going on for months, Thanks John

    Read the article

  • Broadcom HT1100 SATA controller not working properly with 1TB drives

    - by Jeff C
    I've been using RHEL distro's for several years and always managed to find the answers until now. I know this is more of a hardware issue, but I've been working on this for over a week and trust Linux and the IT community to help more then HP. I have CentOS 6.3 installed on an HP ProLiant DL145 G3 server with the BroadCom HT1100 IO controller and ServerWorks SATA Controller MMIO BIOS v3.0.0015.6 Firmware. This controller does not support large drives fully. Here's what I've tried and the results; Stock setup - Freezes on the ServerWorks POST screen. Can't even enter CMOS without disconnecting the drives. If I simply disconnect the SATA cables before it gets to the ServerWorks screen and reconnect afterwards I can boot from a CD, USB, PXE fine. However fiddling with cables at ever boot isn't practical. If I enter the BIOS config I can set it to not try booting the drives but leave the controller enabled. This lets me boot normally but the drives are not visible in the OS (live CDs or USB installed). I used method #2 to install and update CentOS. I have the /boot partition on a USB drive (everything else is on the SATA drives in software RAID1) hoping that would work around the issue but I get this Kernel panic - not syncing:Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.32-279.9.1.el6.x86_6 #1 Call Trace: [<ffffffff814fd6ba>] ? panic+0xa0/0x168 [<ffffffff81070c22>] ? do_exit+0x862/0x870 [<ffffffff8117cdb5>] ? fput+0x25/0x30 [<ffffffff81070c88>] ? do_group_exit+0x58/0xd0 [<ffffffff81070d17>] ? sys_exit_group+0x17/0x20 [<ffffffff8100b0f2>] ? system_call_fastpath+0x16/0x1b panic occured, switching back to text console I'm sure it should be possible to talk to the drives without the BIOS boot check since the BIOS doesn't see them in method #2 either, their disconnected when it checks, but Linux sees them fine. If anyone could help figure out how I would greatly appreciate it! The other possible option I've come across is a complex firmware update. Tyan has a few boards on their website with the HT1100 and a ServerWorks v3.0.0015.7 update which says "adds support for TB drives" in the release notes. If someone could help me get the Tyan SATA firmware into the HP ROM file so I could just reflash that would also be very much appreciated. Thanks for any help you guys can offer!

    Read the article

  • OpenVPN - client-to-client traffic working in one direction but not the other

    - by Pawz
    I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. I am using "fragment 1400" and "mssfix" on all three machines. An mtu-test on both connections is successful. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ? FWIW, pinging 10.0.1.253 from Kino has the same result - the traffic does not get forwarded. UPDATE: I've found that I can only ping certain IP's on Guchuko's LAN from Outpost. From Outpost I can ping 192.168.0.3 and 192.168.0.2, but 192.168.99 and 192.168.0.4 are unreachable. The same tcpdump behavior can be seen. I think this means the problem can't be due to ipforwarding or routing, because Outpost can reach SOME hosts on Guchuko's LAN but not others and likewise, Guchuko can reach two hosts on Outpost's LAN, but not others. This baffles me.

    Read the article

  • Apache certificates for some urls not working

    - by Vegaasen
    We are having a rather strange problem with a Apache-installation. Here is a short summary: Currently I'm setting up Apache with https, and server-certificates. This is fairly easy and works straight out of the box - as expected. This is the configuration for this setup: Listen 443 SSLEngine on SSLCertificateFile "/progs/apache/ssl/example-site.no.pem" SSLCertificateKeyFile "/progs/apache/ssl/example-site.no.key" SSLCACertificateFile "/progs/apache/ssl/ca/example_root.pem" SSLCADNRequestFile "/progs/apache/ssl/ca/example_intermediate.pem" SSLVerifyClient none SSLVerifyDepth 3 SSLOptions +StdEnvVars +ExportCertData RequestHeader set ssl-ClientCert-Subject-CN "%{SSL_CLIENT_S_DN}s" RewriteEngine On ProxyPreserveHost On ProxyRequests On SSLProxyEngine On ... <LocationMatch /secureStuff/$> SSLVerifyClient require Order deny,allow Allow from All </LocationMatch> ... <Proxy balancer://exBalancer> Header add Set-Cookie "EX_ROUTE=EB.%{BALANCER_WORKER_ROUTE}e; path=/" env=BALANCER_ROUTE_CHANGED BalancerMember http://10.0.0.1:7200 route=ee1 retry=300 flushpackets=off keepalive=on BalancerMember http://10.0.0.2:7200 route=ee2 retry=300 flushpackets=off keepalive=on status=+H ProxySet stickysession=EX_ROUTE scolonpathdelim=Off timeout=10 nofailover=off failonstatus=505 maxattempts=1 lbmethod=bybusyness Order deny,allow Allow from all </Proxy> RewriteCond %{REQUEST_URI} !^/index.html [NC] RewriteRule ^/(.*)$ balancer://exBalancer/$1 [P,NC] ProxyPassReverse / balancer://exBalancer/ Header edit Set-Cookie "(.*)" "$1;HttpsOnly" ... So - everything works fine and as expected for all of the pages that are not a part of the LocationMatch-directive. When requesting something that matches the LocationMatch-directive, I'm asked for a certificate (hence the SSLVerifyClient required attribute) - and getting all the correct certificates in my browser that is based on the root/intermediate chain. After choosing a certificate and clicking "OK", this is what pops up in the apache logs: [ssl:info] [pid 9530:tid 25] [client :43357] AH01998: Connection closed to child 86 with abortive shutdown ( [Thu Oct 11 09:27:36.221876 2012] [ssl:debug] [pid 9530:tid 25] ssl_engine_io.c(1171): (70014)End of file found: [client 10.235.128.55:45846] AH02007: SSL handshake interrupted by system [Hint: Stop button pressed in browser?!] And this just spams the logs. What is happening here? I can see this configuration working on my local machine, but not on one of our servers. There is no configration differences between the servers, only minor application-wise-changes. I've tried the following: 1) Removing CA-certificate-checking (works) 2) Adding required CA-certificate for the whole site (works) 3) Adding "SSLVerifyClient optional" does not work 4) ++ Server/Application Information Local: -OpenSSL v.1.0.1x -Apache 2.4.3 -Ubuntu -mpm: event -every configuration should be turned on (failing) server: -OpenSSL 0.9.8e -Apache 2.4.2 -SunOS -mpm: worker -every configuration should be turned on Please let me know if more information is needed, I'll provide it instantly. Brief sum-up: -Running apache 2.4 -Server certificates works just fine -Client certificates for some /Locations does not work, fails with errors PS: Could it be related with the OpenSSL version and the "Renegotiation" stuff related to TLS/SSLv3?

    Read the article

  • NGINX SSL Certificate Not Working

    - by LeSamAdmin
    I've been working on SSL stuff and getting nowhere from like 4 tutorials... I've bought an SSL for pingrglobe.com, and now trying to apply it to my servers. Here's my nginx code: http { server { listen 80; server_name pingrglobe.com; rewrite ^(.*) http://www.pingrglobe.com$1 permanent; } server { listen 443; ssl on; ssl_certificate /etc/nginx/ssl/pingrglobe.crt; ssl_certificate_key /etc/nginx/ssl/pingrglobe.key; #enables SSLv3/TLSv1, but not SSLv2 which is weak and should no longer be used. ssl_protocols SSLv3 TLSv1; #Disables all weak ciphers ssl_ciphers ALL:!aNULL:!ADH:!eNULL:!LOW:!EXP:RC4+RSA:+HIGH:+MEDIUM; server_name www.pingrglobe.com; root /var/www/pingrglobe.com; index index.html index.php; location / { try_files $uri $uri/ @extensionless-php; add_header Access-Control-Allow-Origin *; } rewrite ^/blog/blogpost/(.+)$ /blog/blogpost?post=$1 last; rewrite ^/viewticket/(.+)/(.*)$ /viewticket?tid=$1&$2 last; rewrite ^/vemail/(.+)$ /vemail?eid=$1 last; rewrite ^/serversettings/(.+)$ /serversettings?srvid=$1 last; rewrite ^/notification/(.+)$ /notification?id=$1 last; rewrite ^/viewreport/(.+)$ /viewreport?srvid=$1 last; rewrite ^/removeserver/(.+)$ /removeserver?srvid=$1 last; rewrite ^/staffviewticket/(.+)/(.*)$ /staffviewticket?tid=$1&$2 last; rewrite ^/activate/(.*)/(.*)/(.*)$ /activate?user=$1&code=$2&email=$3 last; rewrite ^/activate2/(.*)/(.*)/(.*)$ /activate2?user=$1&code=$2&email=$3 last; rewrite ^/passwordtoken/(.+)/(.*)/(.*)$ /passwordtoken?user=$1&token=$2&email=$3 last; location ~ \.php$ { try_files $uri =404; fastcgi_pass unix:/var/run/php5-fpm.sock; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; include fastcgi_params; } location @extensionless-php { rewrite ^(.*)$ $1.php last; } location ~ /\. { deny all; } } } SSL doesn't work as you see here: https://www.pingrglobe.com

    Read the article

  • Nginx config - serving index.html not working

    - by Bill
    I can't figure out how to redirect / to index.html. I've gone through the threads on serverfault and I think I've tried every suggestion including: rewrite statements within location / index index.html at the server level, within location / and within static content moving node.js proxy statements to location ~ /i instead of within location / Obviously something is wrong somewhere else in my configuration. Here is my nginx.conf: worker_processes 1; pid /home/logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; error_log /home/logs/error.log; access_log /home/logs/access.log combined; include sites-enabled/*; } and my server config located in sites-enabled server { root /home/www/public; listen 80; server_name localhost; # proxy request to node location / { index index.html index.htm; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-NginX-Proxy true; proxy_pass http://127.0.0.1:3010; proxy_redirect off; break; } # static content location ~ \.(?:ico|jpe?g|jpeg|gif|css|png|js|swf|xml|woff|eot|svg|ttf|html)$ { access_log off; add_header Pragma public; add_header Cache-Control public; expires 30d; } gzip on; gzip_vary on; gzip_http_version 1.0; gzip_comp_level 2; gzip_proxied any; gzip_min_length 1000; gzip_disable "msie6"; gzip_types text/plain text/css application/json application/x-javascript text/xml application/xml application/xml+rss text/javascript; } Everything else is working just fine. Requests get proxied to node correctly and static content is served correctly. I just need to be able to forward requests made to / to /index.html.

    Read the article

  • How to remove a non-empty directory which is not owned by the user in Linux?

    - by Alex B
    If a directory "foo" is owned by user A and contains a directory "bar", which is owned by root, user A can simply remove it with rmdir, which is logical, because "foo" is writable by user A. But if the directory "bar" contains another root-owned file, the directory can't be removed, because files in it must be removed first, so it becomes empty. But "bar" itself is not writable, so it's not possible to remove files in it. Is there a way around it? Or, convince me otherwise why it's necessary.

    Read the article

  • Wifi not working after a few minutes

    - by drtanz
    I'm using a few MacBooks and iPads connected to a router via WiFi. The problem is that a few minutes after they connect via WiFi the connection stops working. This happens on all devices. I went into the router settings by connecting via cable and everything seems in order. Connecting a laptop via cable to the router I can use internet as normal, the problem is only with WiFi. What can be the problem here? Here are the connected clients Connected Clients MAC Address Idle(s) RSSI(dBm) IP Addr Host Name Mode Speed (kbps) 14:10:9F:F3:48:D6 1 -36 192.168.0.5 Jeans-Air n 78000 14:99:E2:C6:41:10 1 -36 192.168.0.8 JeanGaleasiPad n 24000 Here's the router event log Mon Dec 30 04:12:30 2013 Notice (6) WiFi Interface [wl0] set to Channel 1 (Side-Band Channel:N/A)... Mon Dec 30 04:12:25 2013 Notice (6) WiFi Interface [wl0] set to Channel 1 (Side-Band Channel:5) -... Mon Dec 30 02:17:56 2013 Notice (6) WiFi Interface [wl0] set to Channel 40 (Side-Band Channel:36)... Mon Dec 30 02:16:04 2013 Notice (6) WiFi Interface [wl0] set to Channel 11 (Side-Band Channel:7) ... Mon Dec 30 01:59:26 2013 Notice (6) WiFi Interface [wl0] set to Channel 6 (Side-Band Channel:N/A)... Mon Dec 30 01:59:22 2013 Notice (6) WiFi Interface [wl0] set to Channel 6 (Side-Band Channel:2) -... Sun Dec 29 23:27:51 2013 Notice (6) WiFi Interface [wl0] set to Channel 1 (Side-Band Channel:N/A)... Sun Dec 29 23:27:49 2013 Notice (6) WiFi Interface [wl0] set to Channel 11 (Side-Band Channel:N/A... Sun Dec 29 14:32:55 2013 Critical (3) Started Unicast Maintenance Ranging - No Response received - ... Sat Dec 28 13:08:19 2013 Error (4) DHCP REBIND WARNING - Field invalid in response ;CM-MAC=1c:3e... Fri Dec 27 18:10:19 2013 Critical (3) Started Unicast Maintenance Ranging - No Response received - ... Fri Dec 27 16:08:55 2013 Error (4) Map Request Retry Timeout;CM-MAC=1c:3e:84:f1:6b:84;CMTS-MAC=0... Thu Dec 26 21:08:53 2013 Notice (6) WiFi Interface [wl0] set to Channel 11 (Side-Band Channel:7) ... Thu Dec 26 20:43:50 2013 Notice (6) WiFi Interface [wl0] set to Channel 11 (Side-Band Channel:N/A... Tue Dec 24 12:45:03 2013 Critical (3) Started Unicast Maintenance Ranging - No Response received - ... Tue Dec 24 04:55:52 2013 Error (4) Map Request Retry Timeout;CM-MAC=1c:3e:84:f1:6b:84;CMTS-MAC=0... Mon Dec 23 12:32:00 2013 Notice (6) TLV-11 - unrecognized OID;CM-MAC=1c:3e:84:f1:6b:84;CMTS-MAC=0... Mon Dec 23 12:32:00 2013 Error (4) Missing BP Configuration Setting TLV Type: 17.9;CM-MAC=1c:3e:... Mon Dec 23 12:32:00 2013 Error (4) Missing BP Configuration Setting TLV Type: 17.8;CM-MAC=1c:3e:... Mon Dec 23 12:32:00 2013 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MAC... Mon Dec 23 18:32:02 2013 Notice (6) Honoring MDD; IP provisioning mode = IPv4 Mon Dec 23 18:31:10 2013 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=1c:3e:84:f1... Mon Dec 23 18:28:57 2013 Critical (3) Received Response to Broadcast Maintenance Request, But no Un... Mon Dec 23 18:28:25 2013 Critical (3) Started Unicast Maintenance Ranging - No Response received - ... Mon Dec 23 12:17:48 2013 Notice (6) TLV-11 - unrecognized OID;CM-MAC=1c:3e:84:f1:6b:84;CMTS-MAC=0... Mon Dec 23 12:17:48 2013 Error (4) Missing BP Configuration Setting TLV Type: 17.9;CM-MAC=1c:3e:... Mon Dec 23 12:17:48 2013 Error (4) Missing BP Configuration Setting TLV Type: 17.8;CM-MAC=1c:3e:... Mon Dec 23 12:17:48 2013 Warning (5) DHCP WARNING - Non-critical field invalid in response ;CM-MAC... Mon Dec 23 18:17:48 2013 Notice (6) Honoring MDD; IP provisioning mode = IPv4 Mon Dec 23 18:16:58 2013 Critical (3) No Ranging Response received - T3 time-out;CM-MAC=1c:3e:84:f1... Mon Dec 23 18:16:15 2013 Critical (3) Received Response to Broadcast Maintenance Request, But no Un... Mon Dec 23 18:15:43 2013 Critical (3) Started Unicast Maintenance Ranging - No Response received - ...

    Read the article

  • All PHP sites stopped working on IIS7, internal server error 500

    - by TimothyP
    I installed multiple drupal 7 sites using the Web Platform Installer on Windows Server 2008. Until know they worked without any problems, but recently internal server error 500 started to show up (once every so many requests), now it happens for all requests to any of the php sites. There's not much detail to go on, and nothing changed between the time when it was working and now (well nothing I know of anyway) The log file is flooded with messages such as [09-Aug-2011 09:08:04] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:16] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:16] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:20] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:22] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:08:51] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:09:56] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:09:57] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:12:13] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:15:09] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:15:09] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:21:28] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 [09-Aug-2011 09:21:28] PHP Fatal error: Allowed memory size of 262144 bytes exhausted (tried to allocate 261904 bytes) in Unknown on line 0 I have tried increasing the memory limit in php.ini as such: memory_limit = 512MB But that doesn't seem to solve the problem either. This is in the global php configuration in IIS When I looked at the sites one by one, I noticed that PHP seemed to have been disabled. PHP is not enabled. Register new PHP version to enable PHP via FastCGI So I tried to register the php version again C:\Program Files\PHP\v5.3\php-cgi.exe But when I try to apply the changes I get There was an error while performing this operation Details: Operation is not valid due to the current state of the object There doesn't seem to be any other information than that. I have no idea why all of a sudden php isn't available for the sites anymore. PS: I have rebooted IIS, the server, etc... This server is hosted on amazon S3, so I gave the server some more power Update These seem to be two different issues I used memory_limit=128MB instead of memory_limit=128M Notice the "M" instead of "MB" A memory_limit of 128M was not enough, had to increase it to 512M The first issue caused internal server errors for every request. Increasing to 512MB seemed to have solved the problem for a little while, but after a while the server errors return. Note that the PHP manager inside of IIS still shows there is no PHP available for the sites (the global config does see it as available) So the problem remains unsolved

    Read the article

  • JDesktop Integration Components binary has stopped working

    - by rot
    I googled it but not able to find the solution. I am working on swing APIs org.jdesktop.jdic.browser.*. When I am clicking on link displayed in java browser created using bove APIs, it gives windows error pop-up message: JDesktop Integration Components binary has stopped working JDK version I am using is: 1.6.0_31-b05. Please let me know work around or show to solve issue. Thanks in advance.

    Read the article

  • Adobe Flex Transparency not working on Button icon

    - by johnc
    I am fairly inexperienced with Flex, but my googling has retrieved nothing to suggest this is an obvious question. I have an mx:Button with an Icon on it that is a png file with a transparent background, as below, however the transparency is not working, and the icon is painted with a white background. <mx:Button label="Button" icon="@Embed(source='images/clearTracks.png')"/> I have seen how to use a ByteArrayImage to get a transparency working on an image, but this technique doesn't appear available for a button's icon property.

    Read the article

  • Crystal Report not working on Windows server 2008

    - by gofor.net
    Crystal Report is working fine on local database,but its not working on windows server 2008 when i deployed it on IIS 7. I have run Crystal report run time also.I copied CrystalDecisions.CrystalReports.Engine.dll, CrystalDecisions.ReportSource.dll and CrystalDecisions.Shared.dll from C:\Program Files (x86)\Business Objects\Common\3.5\managed\dotnet2 into bin folder of my application.Still its not showing anything and not throwing any error also. It will be very kind if someone help me. Thanking you.

    Read the article

  • AutoCompleteExtender not working for WebService hosted on IIS 7

    - by Manish
    I have a web service file in my project having a web method which is used for AutoCompleteExtender and which works fine when I debug it from VS. But when I publish and host it on IIS, it's not working properly. However, I tested the webservice method directly by typing the URL and it gave the desired output. Is their a special setting needs to be done in IIS to make it working or any property of AutoCompleteExtender need to be set?

    Read the article

  • PHP Sockets Not Working

    - by isurulucky
    Hi, I switched from Lighttpd server to WAMP and then found sockets in php are not working. But php is configured and working. (phpinfo() works) I removed the comment for the php_sockets.dll in php.ini @ C:\wamp\bin\php\php5.2.5.but still gives the error "Fatal error: Call to undefined function socket_create()". Any more configurations to do to enable sockets in php in WAMP? (php_sockets.dll is there as well, I've checked) Thank You!

    Read the article

  • ExpectedExceptionAttribute is not working in MSTest

    - by Micah
    This is wierd, but all of a sudden the `ExpectedExceptionAttribute' quit working for me the other day. Not sure what's gone wrong. I'm running VS 2010 and VS 2005 side-by-side. It's not working in VS 2010. This test should pass, however it is failing: [TestMethod] [ExpectedException(typeof(ArgumentNullException))] public void Test_Exception() { throw new ArgumentNullException("test"); } Any ideas? This really sux.

    Read the article

  • How to make working binary using llvm

    - by prosseek
    I want to get the working binary out of llvm, using step by step method. I'm working on Snow Leopard. llvm-gcc h.c -emit-llvm -S -o hi.ll - hi.ll llvm-as hi.ll - hi.bc (jit binary?) llc hi.bc - hi.s (assembly code) How can I get the binary to run on Mac OS X with hi.bc?

    Read the article

  • Password protection by .htaccess file not working after deployment on a new server

    - by misterjeeling
    Hello, I migrated my application to a new server (from a VPS to a dedicated) yesterday and the password protection which was working correctly on the previous server (using .htaccess file - asking username/pass) doesn't work anymore : anyone can access the website without being asked to enter a username pass. I don't really have a clue why it's not working anymore as I kept everything the same.

    Read the article

  • Software development working from home

    - by johnhilbron
    Hi, Do you all think that working from home is the wave of the future for software development? In this day and age it seems like a logical next step for software developers to work from their homes and connect to each other using IM, video chat and phone. Etc, etc... What forces are in action pushing software development in this direction? What forces are keeping more people from working remotely? John

    Read the article

  • Order by descending is not working on LINQ to Entity

    - by Vinni
    Order by descending is not working on LINQ to Entity In the following Query In place of ascending If I keep descending it is not working. Please help me out var hosters = from e in context.Hosters_HostingProviderDetail where e.ActiveStatusID == pendingStateId orderby e.HostingProviderName ascending select e; return hosters.ToList();

    Read the article

< Previous Page | 177 178 179 180 181 182 183 184 185 186 187 188  | Next Page >