Search Results

Search found 64952 results on 2599 pages for 'windows live sync'.

Page 1814/2599 | < Previous Page | 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821  | Next Page >

• Git clone/pull across local network

  - by Tom Sarduy

  I'm trying to clone/pull a repository in another PC using Ubuntu Quantal. I have done this on Windows before but I don't know what is the problem on ubuntu. I tried these: git clone file:////pc-name/repo/repository.git git clone file:////192.168.100.18/repo/repository.git git clone file:////user:pass@pc-name/repo/repository.git git clone smb://c-pc/repo/repository.git git clone //192.168.100.18/repo/repository.git Always I got: Cloning into 'intranet'... fatal: '//c-pc/repo/repository.git' does not appear to be a git repository fatal: The remote end hung up unexpectedly or fatal: repository '//192.168.100.18/repo/repository.git' does not exist More: The other PC has username and password Is not networking issue, I can access and ping it. I just installed git doing apt-get install git (dependencies installed) I'm running git from the terminal (I'm not using git-shell) What is causing this and how to fix this? Any help would be great! UPDATE I have cloned the repo on Windows using git clone //192.168.100.18/repo/intranet.git without problems. So, the repo is accessible and exist! Maybe the problem is due user credentials?

  Read the article

• Server 2008 Print Redirection is failing but only on 16Bit apps

  - by ian

  the main programmer for SoEasyAccounting and we are installing to Server 2008 Standard service pack 1. We install to 2003 with no problems. Important to understand that the print failure only happens in certain circumstances: Note: We use a standard Windows printer selection box to choose the printer Terms used Superbase = a program language that uses ntvdm.exe (Windows process hosting 16 bit apps) Local Printer = printing to a driver loaded onto the Server 2008 Redirect Printer = printing to a automatically established remote printer through an RDP connection Printing Scenarios Server 2008 - 1: Print from notepad to a Redirected Printer = works Server 2008 - 2: Print from Superbase to a Local Printer = works Server 2008 - 3: Print from Superbase to a Redirected Printer = fail Server 2003 - 4: Print from Superbase to a Redirected Printer = works Results The print causes a message in the drivers print queue of Local Downlevel Document, no print though and Superbase recognises that the "Print command failed". Eventvwr has no related issues to the print fail Any help greatly appreciated. So far 2 days spent trying to resolve and here goes my weekend :( unless someone has an idea :) Things I have Tried i. Switching on/off Easy print ii. Loading copy of redirected driver on server

  Read the article

• Disable or remove filter driver for single HID device

  - by snoopen

  Running Windows XP in a corporate setting here. I have an issue where a filter driver is interfering with the functionality of different USB HIDs. For example graphics tablets do not respond while the filter driver is in place. I've also had the issue with foot pedals used with transcription software. My question is really two fold: A) what makes Windows use a filter driver on one HID but not another? B) when a filter driver is causing conflicts how can I disable it on the affected devices? Background I've previously narrowed down the issue to the filter driver by uninstalling the software (Funk Proxy Host) responsible for the filter driver. The software is a type of RDP we use here at work. (I might have even booted into safe mode and renamed the file, I forget). I believe the filter driver is present to disable or modify the use of the local keyboard and mouse while admin staff are assisting users. Either way I don't have the authority to just go uninstalling this software. As far as I can tell the software versions are the same, however I'm not sure if the device driver definitions are all the same as I don't know where these things would be located. To check for the presence of the filter driver I locate the hardware device in Device Manager, click Properties Driver tab Driver Details.... It shows up as ph32ihid.sys. Even though all machines are meant to have the same SOE and do have Funk Proxy Host installed I don't always have issues with the same HIDs. A few machines here the foot pedals without any issues. I've not had any machines work with the graphics tablet without uninstalling Funk software. Driver details I've just read up a bit more about filter drivers and found the drivers description in the registry under "HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\ProxyHostHIDFilter" There it's called "Kernel-mode HID filter driver for the Proxy Host". Presumably I could also disable it here but that would be system wide which is probably not desirable?

  Read the article

• Removing a device in "removed" state from Linux software RAID array

  - by Sahasranaman MS

  My workstation has two disks(/dev/sd[ab]), both with similar partitioning. /dev/sdb failed, and cat /proc/mdstat stopped showing the second sdb partition. I ran mdadm --fail and mdadm --remove for all partitions from the failed disk on the arrays that use them, although all such commands failed with mdadm: set device faulty failed for /dev/sdb2: No such device mdadm: hot remove failed for /dev/sdb2: No such device or address Then I hot swapped the failed disk, partitioned the new disk and added the partitions to the respective arrays. All arrays got rebuilt properly except one, because in /dev/md2, the failed disk doesn't seem to have been removed from the array properly. Because of this, the new partition keeps getting added as a spare to the partition, and its status remains degraded. Here's what mdadm --detail /dev/md2 shows: [root@ldmohanr ~]# mdadm --detail /dev/md2 /dev/md2: Version : 1.1 Creation Time : Tue Dec 27 22:55:14 2011 Raid Level : raid1 Array Size : 52427708 (50.00 GiB 53.69 GB) Used Dev Size : 52427708 (50.00 GiB 53.69 GB) Raid Devices : 2 Total Devices : 2 Persistence : Superblock is persistent Intent Bitmap : Internal Update Time : Fri Nov 23 14:59:56 2012 State : active, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 Name : ldmohanr.net:2 (local to host ldmohanr.net) UUID : 4483f95d:e485207a:b43c9af2:c37c6df1 Events : 5912611 Number Major Minor RaidDevice State 0 8 2 0 active sync /dev/sda2 1 0 0 1 removed 2 8 18 - spare /dev/sdb2 To remove a disk, mdadm needs a device filename, which was /dev/sdb2 originally, but that no longer refers to device number 1. I need help with removing device number 1 with 'removed' status and making /dev/sdb2 active.

  Read the article

• why is Mac OSX Lion losing login/network credentials?

  - by Larry Kyrala

  (moved from stackoverflow...) Symptoms So at work we have OSX 10.7.3 installed and every once in a while I will see the following behaviors: 1) if the screen is locked, then multiple tries of the same user/pass are not accepted. 2) if the screen is unlocked, then opening a new bash term may yield prompts such as: `I have no name$` or lkyrala$ ssh lkyrala@ah-lkyrala2u You don't exist, go away! Even when our macs are working normally, everyone here has to login twice. The first time after boot always fails, but the second time (with the same password, not changing anything, just pressing enter again) succeeds. Weird? Workarounds There are some workarounds that resolve the immediate problem, but don't prevent it from happening again: a) wait (maybe an hour or two) and the problems sometimes go away by themselves. b) kill 'opendirectoryd' and let it restart. (from https://discussions.apple.com/thread/3663559) c) hold the power button to reset the computer Discussion Now, the evidence above points me to something screwy with opendirectory and login credentials. Some other people report having these login problems, but it's hard to determine where the actual problem is (Mac, or network environment?). I should add that most of the network are Windows machines, but we have quite a few Macs and Linux machines as well, but I'm not sure of the details of how the network auth is mapped from various domains to others... all I know is that our network credentials work in Windows domains as well as mac and linux logins -- so something is connecting separate systems, or using the same global auth system.

  Read the article

• which grabber is good enough to get 1000fps?

  - by user261002

  I have two framegrabber with a fast camera (1800+ fps). can anybody who understand the hardware, explain to me which of the following grabbers can help me more to grab 1000fps ? here are the the features of the two grabbers : Inspecta-5 Full Camera Link® Version: · Support for line scan and area cameras. · Video data rate of up to 660 Mbytes/sec. · PCI – X bus interface for 64 Bit data width and 66 MHz clock frequency. · PCI bus interface for 32 Bit data width and 33 MHz clock frequency. · 2 Gigabyte Onboard Memory for fast video streams. · Four opt coupled input- output ports for external trigger and encoder signals. · 528 Mbytes/sec. maximum data rate on the PCI–X Bus. · SDK for Windows 2000/XP SILICONSOFTWARE V-Series Camera Link : “microEnable IV VD4-CL” · Camera Pixel Clock Support 85 MHz · Area Scan Cameras 32k * 64k max. image size · Line Scan Cameras 64k max. image width · Acquisition Buffer: 512 MB DDR-RAM · Sustainable Transfer Rate (max.) 850 MBytes/sec. · microEnable SDK for Windows XP/Vista/ 7/ Linux

  Read the article

• Using IIS6 to run kill process. Executable hangs

  - by David

  I'm using the following code (any tried many variations) in a web page that is supposed to kill a process on the server: Process scriptProc = new Process(); SecureString password = new SecureString(); password.AppendChar('p'); password.AppendChar('s'); password.AppendChar('s'); password.AppendChar('w'); password.AppendChar('d'); scriptProc.StartInfo.UserName = "mylocaluser"; scriptProc.StartInfo.Password = password; scriptProc.StartInfo.FileName = @"C:\WINDOWS\System32\WScript.exe"; scriptProc.StartInfo.Arguments = @"c:\windows\system32\killMyApp.vbs"; scriptProc.StartInfo.UseShellExecute = false; scriptProc.Start(); scriptProc.WaitForExit(); scriptProc.Close(); The VBS file is supposed to kill a w3wp.exe process, but never works. There are no errors in the application log. It works locally. I noticed WScript.exe is in task manager every time I run the page, and never goes away. The process WScript.exe (and I tried others such a psexec.exe) is being run as a local user with admin rights (and I tried other types of users including domain admins) when run from IIS, but it works when run from the command line on the server.

  Read the article

• Rebuilding LVM after RAID recovery

  - by Xiong Chiamiov

  I have 4 disks RAID-5ed to create md0, and another 4 disks RAID-5ed to create md1. These are then combined via LVM to create one partition. There was a power outage while I was gone, and when I got back, it looked like one of the disks in md1 was out of sync - mdadm kept claiming that it only could find 3 of the 4 drives. The only thing I could do to get anything to happen was to use mdadm --create on those four disks, then let it rebuild the array. This seemed like a bad idea to me, but none of the stuff I had was critical (although it'd take a while to get it all back), and a thread somewhere claimed that this would fix things. If this trashed all of my data, then I suppose you can stop reading and just tell me that. After waiting four hours for the array to rebuild, md1 looked fine (I guess), but the lvm was complaining about not being able to find a device with the correct UUID, presumably because md1 changed UUIDs. I used the pvcreate and vgcfgrestore commands as documented here. Attempting to run an lvchange -a y on it, however, gives me a resume ioctl failed message. Is there any hope for me to recover my data, or have I completely mucked it up?

  Read the article

• Mac, VNC and multiple monitors

  - by MarqueIV

  I asked a similar question here before but apparently I wasn't as clear as I had expected by the responses. That said, I'll try again. I have a Mac Pro with quad monitors which I would like to access remotely. I've been using VNC for this (either via screen sharing or a dedicated VNC client), which works, but the VNC protocol matches the physical layout/resolutions of attached monitors. One of the things I like about Microsoft's Remote Desktop (Terminal Server) client is that when you connect, it blanks out the local screens and sets the resolution to a client-specified setting. In other words, when natively running Windows, even though I'm running a physical 30" monitor flanked by 2 24" monitors as well as a 21" Cintiq monitor, I can set the Remote Desktop resolution to match my notebook's screen giving me a native, single-monitor configuration. As soon as I disconnect (and you log back in locally), the desktop un-blanks and the resolution resets back to the four physically attached monitors. Again, VNC works and yes I know I can use 5901, 5902...n to attach VNC to a specific monitor as opposed to the entire desktop, but I'm still at the mercy of trying to look at a 2560x1600 resolution on a 1280x800 screen. I'm left with either scaling (everything's too small) or panning/scrolling (it's like playing hide-and-seek with your documents!) SO... anyone know of any Mac-based remote software (client and server) that will let me connect to my Mac Pro and reset the resolution by the client, just like you can in Windows, or am I SOL?

  Read the article

• Java Deployment and Configuration (1.6.0_21)

  - by user125137

  Sofware: Java Runtime Environment 1.6.0_21 OS: Windows XP Professional 32-Bit, SP3 Situation: a new piece of web based software is being deployed this week and prior to this all the company desktops need to be set up to meet the requirements of this software. One of these requirements is JRE 1.6.0_21. I have successfully scripted the removal of all other Java versions and the installation of the required version, however I cannot get it configured properly. One of the requirements is that the Java console be set to disabled - if it is not it can cause an issue with a particular function. I have pushed out a deployment.config and deployment.properties but the console just will not disable itself.. I know the config is being read correctly because the update tab is being correctly disabled and removed. deployment.config: deployment.system.config=file\:C\:/WINDOWS/Sun/Java/Deployment/deployment.properties deployment.system.config.mandatory=true deployment.properties: #deployment.properties #Fri Jun 15 09:34:31 EST 2012 deployment.version=6.0 deployment.console.startup.mode=DISABLE deployment.javaws.autodownload=NEVER deployment.javaws.autodownload.locked= There is no change if I set the console to ENABLE either - it remains on the default of hidden. I'm sure I can disable the console with a registry change of some form but my preference is to have it done via the deployment files as it gives the option of centralising the properties file to a network share if we wish. If anyone has any suggestions it would be appreciated.

  Read the article

• VMware Workstation "Power off" and "Suspend" buttons are disabled. What is going on?

  - by Ed Norris

  I've been using an XP image for a few months now with no problems. Recently the power off and resume buttons were disabled and I'm not sure what happened to cause that. In addition, the menu items to do those functions are grayed out (like VM | Power | Power Off) I'm using VMware Workstation 6.5.3 on a Windows 7 64-bit host. The image is Windows XP 32-bit. There is plenty of free space and memory on the host and the CPU is not pegged. I am able to power off the image through its Start menu, but that's a workaround not a fix. Any suggestions? TIA EDIT: Well after manually shutting down the image then closing and reopening the image file (which I've done before) in preparation for reinstalling the tools as suggested below, it looks fine. The power off and suspend buttons are enabled and work. So what do I do with this question now? "Close and restart a few times and it may work" doesn't seem useful...

  Read the article

• Problem with ubuntu 10.10 running from USB drive

  - by Surjya Narayana Padhi

  Hi Geeks, I recently downloaded Ubuntu 10.10 and created an USB drive with that. I started to run the Ubuntu from that USB drive. But I am facing so much problem. I am thinking why its not so much easy like Windows to do all my job in ubuntu. Always I get some error message or to install something. This time I am getting the following errors. I am trying to download and install Aircrack-ng. So used the command sudo apt-get install aircrack-ng. But the installation stops with the following error : update-initramfs: deferring update (trigger activated) cp: cannot stat `/vmlinuz': No such file or directory dpkg: error processing bcmwl-kernel-source (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: initramfs-tools bcmwl-kernel-source E: Sub-process /usr/bin/dpkg returned an error code (1) I don't even have the aptitude command installed till now. Are all these errors because of I am running the ubuntu from USB drive? Is there any simple and easy way to go to Ubuntu Software Center and download all the required essentials at one shot and then Aircrack-ng? I could not find the Aircrack-ng in Ubuntu Software Center Can anybody give me detail steps to solve all my problems above. I am frustrated searching for updates and installations. When something works and something does not work. Can anybody suggest me how I should proceed after installing ubuntu to run on a USB drive. So that I can use the OS like Windows. Like software download,wireless driver, sound, video, documents, C:, D: all things should be there. Please somebody help.

  Read the article

• Samba access works with IP address only

  - by Sebastian Rittau

  I added a Debian etch host (hostname: webserver, IP address: 192.168.101.2) running Samba to a Windows network with a Windows 2003 PDC (IP address 192.168.101.3). The Samba server exports a public guest share, called "Intranet". The server shows up fine in the network, but trying to click on it produces an error dialog, stating I don't have the necessary permissions. So does entering \webserver manually and using \webserver\internet states that the path does not exist. Interestingly, accessing the share by IP address (\192.168.101.2 or \192.168.101.2\intranet) works fine. DNS is configured correctly, and "smbclient //webserver/intranet" on another Linux client works fine. One complicating issue is that the webserver is only a VMware virtual machine running on PDC server. Here is our smb.conf: [global] workgroup = Foobar server string = Webserver wins support = yes ; commenting out these wins server = 192.168.101.3 ; two lines has no effect dns proxy = no guest account = nobody [... snipped some unrelated bits, like logging ...] security = share [... snipped some password-related things ...] domain master = no [intranet] comment = Intranet path = /srv/webserver/contents browseable = yes guest ok = yes guest only = yes read only = yes create mask = 0775 directory mask = 0775

  Read the article

• ACER ASPIRE V3-571G-9435 Fan not kicking in leading to overclocking

  - by brythespy

  This laptop has always had this problem. The temperatures kick up to the thermal ceiling of 99C for the CPU (i7-3610QM) and 94C for the GPU (GT 640M). Problem is, the FAN doesn't give a damn. It's actually QUIETER when the temperatures are that high, than when it's at 60C or so. I figured it was a problem with the BIOS, so I updated that, no change. So maybe it was a problem with windows? Nope, same result on gaming with Ubuntu. The major problem of this, is that after gaming for ten minutes the CPU throttles itself to 1197MHz(as opposed to 3193), and the GPU goes down to 135MHz( as opposed to 843MHz). The problem is that the fan won't kick in like I know it can, because when the laptop is in POST, like at BIOS setup, the fan is like a vacuum cleaner it's so loud! I don't really care about noise, so I'd love to have the fan like that all the time as long as the temperatures don't fly through the roof... So, things I've tried so far, to avoid possible duplicate answers. Checked for dust: It's been this way since the laptop was new, and I've since then taken it apart. No dust buildup. Background stuff running?: No, problem persists across OS'es, and it happens while gaming anyways Manually underclocking both CPU/GPU: Using windows, I can force the CPU to stay at 1.1GHz, but the temperature STILL easily hits 99C after 5 min of gaming Contacted Acer support?: No help at all. They told me to update and reset the BIOS, which I have done multiple times. There are only about 6 changeable things anyway, none of which should affect the FAN control Third party fan control program?: None detect the fan So, I'm screwed until I can afford to replace this laptop, but I am very satisfied with performance in games... Whenever the CPU/GPU aren't being throttled. Anyone that can offer advice to solve this problem would be greatly appreciated. Hell, if you solved my problem I'd send you some monies through paypal.

  Read the article

• Transcoding media server streaming to the iPhone

  - by pilif

  I have a huge collection of videos in different formats, but with one thing in common: They are not playable on an iPhone (or iPod Touch). Instead of complaining about Apple's IMHO broken world view ("there are no video formats but quicktime and mp4"), I wonder if there's a solution out there that allows streaming these different videos to the iPhone. This means that the source media needs to be transcoded on the fly. I already tried a few solutions out there, but with varying success: PS3 Media Server kind of worked, but only once and only for one single file. TVersity is said to work, but it requires UAC to be disabled and I don't see any need for this. The solution I'm looking for should run on Windows 2008 Server or Linux. I just can't believe that there's nothing out there that would allow me to stream my huge video collection on my iPhone (we're talking Wifi here, not 3G). After looking at the answers provided and after retrying TVersity without much success, I gave Orb another try and while the web interface failed to work for me, the iPhone Application (I tried the free one at first) actually worked flawlessly. And not only that, it also manages to convert the streams on-the-fly, so you don't have to wait for the transcoding process to finish before playback starts. On my 2.26 Ghz MacMini Server, this worked even with 1080p material. For Windows 2008 Server users out there: Remember to install the Desktop Experience Feature in the Server Manager if you intend this to work. Of all the stuff I had a look at, this really provided instant-success - even though I'm now probably sending the contents of my harddrive to orb's central server (sigh)

  Read the article

• Why does a document in Word 2007 stop recognizing the mouse after the document loses focus?

  - by alt234

  When I open a document in Word 2007, everything works fine, I can edit, highlight text, etc. However, the instant Word loses focus, when I focus back the document doesn't recognize anything the mouse does. The tabbed menu at the top seems to recognize the mouse but the document itself does not. I can scroll through via the scroll-wheel and I can type. However, typing just shows up where the mouse cursor last was before focus was taken away. I've tried clearing some word data registry keys. I've also found that some Word Add-ins can cause problems. LaserFiche is one I see mentioned a lot. As far as I can tell I have no add-ons though. Any ideas? It's crazy-annoying. UPDATE- - Word is the only program that has this problem - Typically I have Toad (Oracle DB management app), an XP virtual machine with various apps running on it, Skype, Google Talk, and maybe a handful of other programs at any given time open... Windows Media player, Outlook. - Yes, this happens even if nothing else is running. From a fresh restart as well. - I'm running Vista 64 with SP1 - According to Windows Update, I have the latest of everything. This has been happening for a couple of months now. Just never took the time to look into because I usually never have to use word.

  Read the article

• Need to restore emails that Outlook deleted from the mail server

  - by Mugen

  I wanted to use POP mail for my Yahoo mail account. So I went to the Yahoo mail settings and enabled POP feature. I installed Microsoft Outlook 2007 and added the settings for my Yahoo mail account. Then I performed a sync. I successfully received all the emails from Yahoo account into my pc. But when I logged into my Yahoo mail online, to my horror all the mails were deleted. It seems someone in Microsoft for some reason decided to keep the default setting unchecked for "Leave copy of messages on the server". This has been a very old account and I need to have all the mails also present on the mail server so I can access it anytime and future purposes. Is there anyway I can restore these emails on the server again? Any ideas how I can get it back to the way it was? I have been googling this for quite sometime now but I'm not able to find it. Any helpful suggestions are welcome. Thanks.

  Read the article

• Ngix rewrite is not working as expected

  - by SamFisher83

  I am trying to learn how to use nginx and how to use its rewrite functionality Nginx seems to be doing the rewrite: 2012/03/27 16:30:26 [notice] 16216#0: *3 "foo.php" matches "/foo.php", client: 61.90.22.223, server: localhost, request: "GET /foo.php HTTP/1.1", host: "domain.com" 2012/03/27 16:30:26 [notice] 16216#0: *3 rewritten data: "img.php", args: "", client: 61.90.22.223, server: localhost, request: "GET /foo.php HTTP/1.1", host: "domain.com" but in my access log I am getting the following: 61.90.22.223 - - [27/Mar/2012:16:26:54 +0000] "GET /foo.php HTTP/1.1" 404 31 "-" "Mozilla/5.0 (Windows NT 6.1; rv:11.0) Gecko/20100101 Firefox/11.0" 61.90.22.223 - - [27/Mar/2012:16:30:26 +0000] "GET /foo.php HTTP/1.1" 404 31 "-" "Mozilla/5.0 (Windows NT 6.1; rv:11.0) Gecko/20100101 Firefox/11.0" There is an img.php in the root directory so I am not sure why I am getting a 404 error Here is part of the configuration block: rewrite foo.php img.php last; location / { try_files $uri $uri/ /index.html; } location ~ \.php$ { fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; } # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # location ~ /\.ht { deny all; }

  Read the article

• kde dropping keyboard

  - by shabbychef

  I am having problems with KDE 'dropping' my keyboard. It happens periodically when using my gentoo box directly, but has become much worse when accessing via NX (from a Mac laptop). Some possibly irrelevant clues: it appears to happen more often when the system is under higher CPU load the mouse continues to work, but no windows will accept any kind of keyboard focus. kwin will not accept tabbing between windows. when working on the machine directly, I can ctrl-alt-F1 to get to a shell (obviously this does nothing over NX). so I think it is KDE and not xorg. am running kwin-4.3.5-r1, and KDE-4.3.5 generally. this problem definitely appeared after upgrading to kde-4.x, but I do not remember if it appeared in kde-4.2. sometimes the keyboard will reappear, but sometimes I have to kill my kde session. playing with accessibility options or window-focus-stealing options in system-settings under kde will often make the keyboard responsive again, only to drop it perhaps minutes later. I had read online this might be an evdev problem under X (again, I think this is KDE, not X, but will try anything). as a result, I have fiddled with my xorg.conf endlessly. I even deleted it entirely and let nvidia-xconfig have a stab at it, with no luck I am tearing my hair out over this. I have done emerge -e xorg-server and am right now doing emerge -e kwin, to rebuild all packages that might be relevant. no luck with the xorg-server rebuild. any help appreciated. thanks,

  Read the article

• Software RAID 1 Configuration

  - by Corve

  I have created a software RAID 1 quite some while ago and it always seemed to work for me. However I am not completely sure that I have configured everything right and do not have the experience to check so I would be very grateful for some advice or just verification that all seems right so far. I am using Linux Fedora 20 (32 bit with plans to upgrade to 64bit) The RAID 1 should consist of two 1TB SATA hard drives. This is the output of mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Sun Jan 29 11:25:18 2012 Raid Level : raid1 Array Size : 976761424 (931.51 GiB 1000.20 GB) Used Dev Size : 976761424 (931.51 GiB 1000.20 GB) Raid Devices : 2 Total Devices : 1 Persistence : Superblock is persistent Update Time : Sat Jun 7 10:38:09 2014 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 Name : argo:0 (local to host argo) UUID : 1596d0a1:5806e590:c56d0b27:765e3220 Events : 996387 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 0 1 active sync /dev/sda The RAID is mounted successfully: friedrich@argo:~ ? sudo mount -l | grep md0 /dev/md0 on /mnt/raid type ext4 (rw,relatime,data=ordered) Basically my question are: Why do I only have 1 active device? What does the State removed at bottom mean? Also I noticed some strange error messages that I see on the console on system start and shutdown and always repeating in the background when I switch with Ctrl + Alt + F2: ... ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: COMRESET failed (errno=-32) ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ata2: irq_stat 0x00000040 connection status changed ata2: SError: { CommWake DevExch } ata2: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen ... Are these errors related to the RAID? Something seems wrong with the SATA devices.. All together the system works (I can read and write to the mounted raid) but I always had these strange errors on startup shutdown (probably always in the background). Thx for your help

  Read the article

• Directories shown as files, when sharing a mounted cifs drive

  - by Johan Sigfred Abildskov

  I have an issue where a directory is shown as a file when accessing a samba share ( on Ubuntu 12.10 ) from a Windows machine. The output from ls -ll in the folder on the linuxbox is as follows: chubby@chubby:/media/blackhole/_Arkiv$ ls -ll total 0 drwxrwxrwx 0 jv users 0 Jun 18 2012 _20 drwxrwxrwx 0 jv users 0 Apr 17 2012 _2006 drwxrwxrwx 0 jv users 0 Apr 17 2012 _2007 drwxrwxrwx 0 jv users 0 May 12 2011 _2008 drwxrwxrwx 0 jv users 0 Feb 19 09:53 _2009 drwxrwxrwx 0 jv users 0 Dec 20 2011 _2010 drwxrwxrwx 0 jv users 0 May 8 2012 _2011 drwxrwxrwx 0 jv users 0 Mar 5 11:37 _2012 drwxrwxrwx 0 jv users 0 Feb 28 10:09 _2013 drwxrwxrwx 0 jv users 0 Feb 28 11:18 _Mailarkiv drwxrwxrwx 0 jv users 0 Jan 3 2011 _Praktikanter The entry in /etc/fstab is: # Mounting blackhole //192.168.0.50/kunder/ /media/blackhole cifs uid=jv,gid=users,credentials=/home/chubby/.smbcredentials,iocharset=utf8,file_mode=0777,dir_mode=0777 0 0 When I access the share directly from the NAS on my Windows box, there are no issues. The version of Samba is 3.6.6, but I couldn't find anything in the changelogs that seem relevant. I've tried mounting it in different locations with different permissions, users and groups but I have not made any progress Due to my low reputation on serverfault ( mostly stackoverflow user ) I'm unable to post a screenshot that shows that the directories are shown as files. If I type the full path in explorer, the directory listing works excellently, except for any subdirectories that are then shown as files. Any attack vector for this issue would be greatly appreciated. Please let me know if I have provided insufficient details. Edit: The same share when accessed from a OS X, works perfectly listing the directories as directories. Best Regards!

  Read the article

• Failover Cluster Quorum Failing

  - by oruchreis

  Hi, I have two nodes which boots from iscsi to implement windows 2008 cluster. And I'm using disk majority option as quorum over iscsi. But when the quorum's iscsi connection failed(May be san server reset), the failover cluster is failed too. If I reset one of the nodes, it can open, but its system disk goes offline. I cant change its status as online, because it says that its reserved by failover cluster(disk is on iscsi, beacuse iscsi boot). And this disk works as readonly. Anything on it cant be deleted or written. So, I cant rejoin the node to the cluster again. I have to reinstall windows. So, what I'm asking is, how can I implement more quorum backup? I mean, can I use both disk majority and file share majority at same time? AFAIK, every nodes also keep the quorum's copy too. But I don't know sometimes san servers goes offline. And quorum's iscsi connection and nodes' iscsi connections get lost. So, nor the quorum that is kept in the nodes neither the quorum iscsi disk is not enough to start the cluster again. I want to use both disk majority and file share majority at the same time. Can I do this? Have you any other suggestion? Regards.

  Read the article

• How to connect computers to a network printer behind a router?

  - by kokbira

  General question: How to connect computers to an IP printer behind a router? Particular question: How to connect C-1 and C-2 to PRI? What? Where? [ISP] | | -> IPs:200.X.X.X/other configs:DC | [R-1] | | -> IPs:10.1.X.X locked by MAC,M:255.0.0.0,G:10.1.0.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [PRI] IP:10.1.7.7 [R-2] IP: 10.1.0.1,MAC:A | | -> IPs:192.168.1.X,M:255.255.255.0,G:192.168.1.1 |¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯| | | [C-1] IP:192.168.1.2 [C-2] IP:192.168.1.3,MAC:A Glossary and details: ------------------------------------------------------------------------------------ - IP: IP. - IPs: Some IP range. - M: Mask. - G: Gateway. - MAC:A: A MAC address that I will not inform you :) - DC: Don't care. - ISP: Internet Service Provider (not so much details about it on that case). - R-1: A real router or some concatenated so IP range bellow that block is 10.1.X.X and above is ISP. The provided IPs are provided by MAC. As all available addresses are in use, you must clone an existing one to join with a new device (and to disconnect the cloned one). - PRI: An network printer (some people here call that IP printer). - R-2: A TP-LINK TL-WR340G, mine wireless router (since my computer does not have ethernet input, it is my ethernet-wifi adapter :), admin access, MAC address cloned from C-2 (MAC:A). I've to configure 10.0.1.1 and 10.0.1.2 as DNS addresses, other wise I cannot connect C-1 and C-2 to Internet. - C-1: My computer, a CCE XLE-425 (remember: no ethernet input), with Windows 7, admin access. - C-2: another computer with better configs than mine, MAC:A, Windows XP. Requirements: I want to print, to access Internet and to do it myself (no need to call network admin men in black people). Pay attention to MAC clones and DNS info.

  Read the article

• Proxy auto-config dnsResolve doesn't seem to resolve subdomains

  - by HorusKol

  We're running on a Windows domain, and have a DNS to control computer names on our intranet. The following PAC works great for basic hostnames on our intranet - but we're setting up some subdomain-like names (example, redesign.buildbox), and it isn't resolving these. These subdomains are resolvable through other means (such as nslookup). Other than checking to see if the host has ".buildbox" or other domain, is there a way to make it work? Maybe I could try appending the Windows domain to host (can you concatenate strings in a PAC)? function FindProxyForURL(url, host) { // If IP address is internal or hostname resolves to internal IP, send direct. var resolved_ip = dnsResolve(host); if (isInNet(resolved_ip, "129.2.2.0", "255.255.255.128")) return "DIRECT"; if (isInNet(resolved_ip, "10.1.1.0", "255.255.255.0")) return "DIRECT"; if (isInNet(resolved_ip, "150.1.2.0", "255.255.255.248")) return "DIRECT"; // All other traffic uses below proxies, in fail-over order. return "PROXY 192.111.222.111:8080; DIRECT"; }

  Read the article

• Weird Apache behaviour and with files again

  - by afifio

  Hi and thanks for stopping by. I have read Weird Apache problem with file, I have read Weird Apache problem with file ...and its not the problem Setup single XAMPP installation on Windows, single windows user, 2HD, 1 is a portable USB. All is fine, until I move the xampp to new portable HD Symptom Old php files - works fine, new one doesnt http://127.0.0.1/Ajax/index.php - yay http://127.0.0.1/test2/t.php - display the source code http://127.0.0.1/Ajax/test2/t.php - display the source code http://127.0.0.1/Ajax/t.php - display the source code Extra Info IIS+MS Web Development stuff, .NET4, Asp, etc is being installed and still hast reboot yet. .htaccess also seems doesnt work Apache2 conf file was modified to Averride All and still it doesnt care. One of the directory supposed to treat .htm as php yet got text, created another directory and edit a phpinfo, still another text, browse to phpmyadmin, viola, works fine Suspect Does Apache honour XP security and permission ? If so, this is a single user computer. Does Apache dont like my new hard disk/new place ? Why it doesnt execute the php in new directory but happily execute in old folder ? Thanks for the riddle answers

  Read the article

< Previous Page | 1810 1811 1812 1813 1814 1815 1816 1817 1818 1819 1820 1821  | Next Page >