Search Results

Search found 5842 results on 234 pages for 'break'.

Page 182/234 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• Testing a Gui-heavy WPF application.

  - by Hamish Grubijan

  We (my colleagues) have a messy 12 y.o. mature app that is GUI-based, and the current plan is to add new dialogs & other GUI in WPF, as well as replace some of the older dialogs in WPF as well. At the same time we wish to be able to test that Monster - GUI automation in a maintainable way. Some challenges: The application is massive. It constantly gains new features. It is being changed around (bug fixes, patches). It has a back end, and a layer in-between. The state of it can get out of whack if you beat it to death. What we want is: Some tool that can automate testing of WPF. auto-discovery of what the inputs and the outputs of the dialog are. An old test should still work if you add a label that does nothing. It should fail, however, if you remove a necessary text field. It would be very nice if the test suite was easy to maintain, if it ran and did not break most of the time. Every new dialog should be created with testability in mind. At this point I do not know exactly what I want, so I am marking this as a community wiki. If having to test a huge GUI-based app rings the bell (even if not in WPF), then please share your good, bad and ugly experiences here.

  Read the article

• AVAudioPlayer problem regarding song overlaping in iPhone

  - by riteshkumar1905

  I have using AVAudioPlayer in my app but the problem is that when i play the song from list it will played while before stopping the song i am again goes to song list then select another song then both song will start playing simultaneously so please tell me the code which will terminate my first song. i am using avTouchContoller & avTouchViewController in my app. so i am enclosing the code for song which is written in avController.m & avTouchViewController.m as follow for single song avtouchController.m switch (flag) { case 1: //[self stop]; fileURL = [[NSURL alloc] initFileURLWithPath: [[NSBundle mainBundle] pathForResource:@"Aarti Keeje" ofType:@"aac"]]; self._player = [[AVAudioPlayer alloc] initWithContentsOfURL:fileURL error:nil]; //self._player=newplayer; //[newplayer release]; if (self._player) { _fileName.text = [NSString stringWithFormat: @"%@ (%d ch.)", [[self._player.url relativePath] lastPathComponent], self._player.numberOfChannels, nil]; [self updateViewForPlayerInfo]; [self updateViewForPlayerState]; } [fileURL release]; break;

  Read the article

• Java Reflection, java.lang.IllegalAccessException Error

  - by rubby

  Hi all, My goal is : Third class will read the name of the class as String from console.Upon reading the name of the class, it will automatically and dynamically (!) generate that class and call its writeout method. If that class is not read from input, it will not be initialized. And I am taking java.lang.IllegalAccessException: Class deneme.class3 can not access a member of class java.lang.Object with modifiers "protected" error. And i don't know how i can fix it.. Can anyone help me? import java.io.*; import java.lang.reflect.*; class class3 { public void run() { try { BufferedReader reader= new BufferedReader(new InputStreamReader(System.in)); String line=reader.readLine(); Class c1 = Class.forName("java.lang.String"); Object obj = new Object(); Class c2 = obj.getClass(); Method writeout = null; for( Method mth : c2.getDeclaredMethods() ) { writeout = mth; break; } Object o = c2.newInstance(); writeout.invoke( o ); } catch(Exception ee) { System.out.println("ERROR! "+ee); } } public void writeout3() { System.out.println("class3"); } } class class4 { public void writeout4() { System.out.println("class4"); } } class ornek { public static void main(String[] args) { System.out.println("Please Enter Name of Class : "); class3 example = new class3(); example.run(); } }

  Read the article

• Image URL not changing in Update panel

  - by Chiefy

  Ok this is probably really simple but I have been staring at it for too long now. I have an AJAX AsyncFileUpload control that when a file is selected I want the Image next to it to change. I tried it in Javascript and it did nothing, i have since tried it server-side and still nothing. here is the client side. <asp:UpdatePanel runat="server" ID="upnlConfidential"> <ContentTemplate> <td> <asp:AsyncFileUpload ID="_flupCV" runat="server" OnUploadedComplete="AdminFileUpload" /> </td> <td> <asp:Image ID="imgCV" runat="server" Height="25px" Width="25px" ImageUrl="~/Images/Exclamation.png"/> </td> </ContentTemplate> </asp:UpdatePanel> and here is the server side protected void AdminFileUpload(object sender, AjaxControlToolkit.AsyncFileUploadEventArgs e) { AjaxControlToolkit.AsyncFileUpload upload = (AjaxControlToolkit.AsyncFileUpload)sender; if (upload.PostedFile != null) { switch (upload.ID) { case "_flupCV": ImageCheckMark(imgCV); break; //etc... } } } private void ImageCheckMark(Image image) { image.Visible = true; image.ImageUrl = "~/Images/CheckMark.png"; } When the server side is called it sets the URL just fine but then nothing happens to the image, when I call the code again the URL is still the previous Exclamation image. its almost like its forgotten. Can anybody help me on this please. Thanks in advance to all who contribute!

  Read the article

• A monkey could do this better - Access to and availability of private member functions in C++

  - by David

  I am wandering the desert of my brain. I'm trying to write something like the following: class MyClass { // Peripherally Related Stuff public: void TakeAnAction(int oneThing, int anotherThing) { switch(oneThing){ case THING_A: TakeThisActionWith(anotherThing); break; //cases THINGS_NOT_A: }; private: void TakeThisActionWith(int thing) { string outcome = new string; outcome = LookUpOutcome(thing); // Do some stuff based on outcome return; } string LookUpOutcome(int key) { string oc = new string; oc = MyPrivateMap[key]; return oc; } map<int, string> MyPrivateMap; Then in the .cc file where I am actually using these things, while compiling the TakeAnAction section, it [CC, the solaris compiler] throws an an error: 'The function LookUpOutcome must have a prototype' and bombs out. In my header file, I have declared 'string LookUpOutcome(int key);' in the private section of the class. I have tried all sorts of variations. I tried to use 'this' for a little while, and it gave me 'Can only use this in non-static member function.' Sadly, I haven't declared anything static and these are all, putatively, member functions. I tried it [on TakeAnAction and LookUp] when I got the error, but I got something like, 'Can't access MyPrivateMap from LookUp'. MyPrivateMap could be made public and I could refer to it directly, I guess, but my sensibility says that is not the right way to go about this [that means that namespace scoped helper functions are out, I think]. I also guess I could just inline the lookup and subsequent other stuff, but my line-o-meter goes on tilt. I'm trying desperately not to kludge it.

  Read the article

• Download Current WSJ.com Prime Rate

  - by Registered User

  I need to automatically download the current Wall Street Journal Prime Rate and load the data into my database. What is the best method for downloading this data automatically? I have come up with three possible solutions for doing this: Scrape a HTML web page from WSJ. Parse a RSS news feed from WSJ. Use some API that I haven't found from WSJ. Regarding solution 1, although I don't like solution 1 since it could easily break, it's the only one that I have worked out from end to end. It appears I can scrape this page with a WebRequest / WebResponse and read the text in this code: <tr> <td style="text-align:left" class="colhead">&nbsp;</td> <td class="colhead">Latest</td> <td class="colhead">Wk ago</td> <td class="colhead">High</td> <td class="colhead">Low</td> </tr> <tr> <td class="text">U.S.</td> <td style="font-weight:bold;" class="num">3.25</td> <td class="num">3.25</td> <td class="num">3.25</td> <td class="num" style="border-right:0px">3.25</td> </tr> Regarding solution 2, although I can implement a RSS reader solution, I don't see a way to reliably anticipate verbiage for changes in the Prime Rate. Therefore, I don't think this is as safe or reliable a way to get the data as solution 1. Regarding solution 3, I haven't found any published API's for checking money rates like the Prime Rate. If anyone knows of a web service or other API for checking money rates, then please let me know.

  Read the article

• JTextArea - Highlight Text While Scrolling Up or Down

  - by Sujay

  I'm trying to work with a non-editable JTextArea added to a JScrollPane. I want a line to be highlighted when the user clicks on that specific line. I could implement this part using the following code: public static void initHighlightOption(final JTextArea textArea){ textArea.setFont(new Font("Courier New", Font.PLAIN, 12)); textArea.setEditable(false); final Action selectLine = getAction(textArea, DefaultEditorKit.selectLineAction); textArea.addMouseListener(new MouseAdapter() { @Override public void mouseClicked(MouseEvent e) { if (SwingUtilities.isLeftMouseButton(e) && e.getClickCount() == 1) { selectLine.actionPerformed(null); } }); textArea.setSelectionStart(0); textArea.setSelectionEnd(0); } public static Action getAction(JTextArea textArea, String name) { Action action = null; Action[] actions = textArea.getActions(); for (int i = 0; i < actions.length; i++) { if (name.equals(actions[i].getValue(Action.NAME).toString())) { action = actions[i]; break; } } return action; } What I want to add is that once a line is highlighted and user scrolls up/down using keyboard up/down key, i want the current line to be highlighted. Is this possible by adding a keyListener? I'm stuck on how highlight data while scrolling up. The text area contains data like this: Line1 Line2 Line3 Line4 Line5 (i.e. there might be new lines between two particular lines of data)

  Read the article

• Why am I getting "(304) Not Modified" error on some links when using HttpWebRequest?

  - by Greg

  Hi, Any ideas why on some links that I try to access using HttpWebRequest I am getting "The remote server returned an error: (304) Not Modified." in the code? The code I'm using is from Jeff's post here. Note the concept of the code is a simple proxy server, so I'm pointing my browser at this locally running piece of code, which gets my browsers request, and then proxies it on by creating a new HttpWebRequest, as you'll see in the code. It works great for most sites/links, but for some this error comes up. You will see one key bit in the code is where it seems to copy the http header settings from the browser request to it's request out to the site, and it copies in the header attributes. Not sure if the issue is something to do with how it mimics this aspect of the request and then what happens as the result comes back? case "If-Modified-Since": request.IfModifiedSince = DateTime.Parse(listenerContext.Request.Headers[key]); break; I get the issue for example from http://en.wikipedia.org/wiki/Main_Page thanks

  Read the article

• Word-wrap grid cells in Ext JS

  - by richardtallent

  (This is not a question per se, I'm documenting a solution I found using Ext JS 3.1.0. But, feel free to answer if you know of a better solution!) The Column config for an Ext JS Grid object does not have a native way to allow word-wrapped text, but there is a css property to override the inline CSS of the TD elements created by the grid. Unfortunately, the TD elements contain a DIV element wrapping the content, and that DIV is set to white-space:nowrap by Ext JS's stylesheet, so overriding the TD CSS does no good. I added the following to my main CSS file, a simple fix that appears to not break any grid functionality, but allows any white-space setting I apply to the TD to pass through to the DIV. .x-grid3-cell { /* TD is defaulted to word-wrap. Turn it off so it can be turned on for specific columns. */ white-space:nowrap; } .x-grid3-cell-inner { /* Inherit DIV's white-space from TD parent, since DIV's inline style is not accessible in the column definition. */ white-space:inherit; } YMMV, but it works for me, wanted to get it out there as a solution since I couldn't find a working solution by searching the Interwebs.

  Read the article

• How to return value using ajax

  - by Priyanka

  Hello. I have Ajax file in which code has written to accept values form user and then these values are taken in a Ajax function as follows: $(document).ready(function(){ $("#newsletterform").validate(); $('#Submit').click(function(){ var name = $('#newsletter_name').val(); var email = $('#newsletter_email').val(); sendValue(email,name); }); }); The function for paasing values and getting values from other file: function sendValue(str,name){ $.post( "newsletter/subscribe.php", //Ajax file { sendValue: str, sendVal: name }, function(data2){ $('#display').html(data2.returnValue); }, //How you want the data formated when it is returned from the server. "json" ); } and these values are passed to another file called "subscribe.php" in which insertion code to database is written and again I return the value to my first ajax function as follows: echo json_encode(array("returnValue"=$msg)); The msg is ging to contain my message to be displayed. But now, this works fine on localhost, I get the return values nad message properly but when I upload it on server this gives me an error as: data2 is null [Break on this error] $('#display').html(data2.returnValue); This only gives error for return value but insertion, sending mail functionality works fine. Please provide me with a good solution wherein I can be able to get back the return values without any error. Thanks in advance.

  Read the article

• MS Access to sql server searching

  - by malou17

  How to use this code if we are going to use sql server database becaUSE in this code we used MS Access as the database private void btnSearch_Click(object sender, System.EventArgs e) { String pcode = txtPcode.Text; int ctr = productsDS1.Tables[0].Rows.Count; int x; bool found = false; for (x = 0; x<ctr; x++) { if (productsDS1.Tables[0].Rows[x][0].ToString() == pcode) { found = true; break; } } if (found == true) { txtPcode.Text = productsDS1.Tables[0].Rows[x][0].ToString(); txtDesc.Text = productsDS1.Tables[0].Rows[x][1].ToString(); txtPrice.Text = productsDS1.Tables[0].Rows[x][2].ToString(); } else { MessageBox.Show("Record Not Found"); } private void btnNew_Click(object sender, System.EventArgs e) { int cnt = productsDS1.Tables[0].Rows.Count; string lastrec = productsDS1.Tables[0].Rows[cnt][0].ToString(); int newpcode = int.Parse(lastrec) + 1; txtPcode.Text = newpcode.ToString(); txtDesc.Clear(); txtPrice.Clear(); txtDesc.Focus(); here's the connectionstring Jet OLEDB:Global Partial Bulk Ops=2;Jet OLEDB:Registry Path=;Jet OLEDB:Database Locking Mode=0;Data Source="J:\2009-2010\1st sem\VC#\Sample\WindowsApplication_Products\PointOfSales.mdb"

  Read the article

• Regular expression for finding non-breaking string names in code and then breaking them up for SQL q

  - by Rob Segal

  I am trying to devlop a regex for finding camel case strings in several code files I am working with so I can break them up into separate words for use in a SQL query. I have strings of the form... EmailAddress FirstName MyNameIs And I want them like this... Email Address First Name My Name Is An example SQL query which I currently have is... select FirstName, MyNameIs from MyTables I need the queries in the form... select FirstName as 'First Name', MyNameIs as 'My Name Is' from MyTables Any time a new capital letter appears that should be a new grouping which I can pick out of the matched string. I currently have the following regex... ([A-Z][a-z]+)+ Which does match the cases I have shown above but when I want to perform a replace I need to define groups. Currently I have tried... (([A-Z])([a-z]+))+ Which sort of works. It will pick out "Address" as the first grouping from "EmailAddress" as opposed to "Email" which is what I was expecting. No doubt there is something I'm misunderstanding here so any help is greatly appreciated.

  Read the article

• What does this code do

  - by Wardy

  Ok someone who happens to be a good friend of mine is sending me some odd emails lately one of which was a link to a page that asks you to copy and paste this in to your address bar in your browser then execute it ... javascript:(function(){a='app125879300771588_jop';b='app125879300771588_jode';ifc='app125879300771588_ifc';ifo='app125879300771588_ifo';mw='app125879300771588_mwrapper';var _0xc100=["\x76\x69\x73\x69\x62\x69\x6C\x69\x74\x79","\x73\x74\x79\x6C\x65","\x67\x65\x74\x45\x6C\x65\x6D\x65\x6E\x74\x42\x79\x49\x64","\x68\x69\x64\x64\x65\x6E","\x69\x6E\x6E\x65\x72\x48\x54\x4D\x4C","\x76\x61\x6C\x75\x65","\x63\x6C\x69\x63\x6B","\x73\x75\x67\x67\x65\x73\x74","\x73\x65\x6C\x65\x63\x74\x5F\x61\x6C\x6C","\x73\x67\x6D\x5F\x69\x6E\x76\x69\x74\x65\x5F\x66\x6F\x72\x6D","\x2F\x61\x6A\x61\x78\x2F\x73\x6F\x63\x69\x61\x6C\x5F\x67\x72\x61\x70\x68\x2F\x69\x6E\x76\x69\x74\x65\x5F\x64\x69\x61\x6C\x6F\x67\x2E\x70\x68\x70","\x73\x75\x62\x6D\x69\x74\x44\x69\x61\x6C\x6F\x67","\x6C\x69\x6B\x65\x6D\x65"];d=document;d[_0xc100[2]](mw)[_0xc100[1]][_0xc100[0]]=_0xc100[3];d[_0xc100[2]](a)[_0xc100[4]]=d[_0xc100[2]](b)[_0xc100[5]];d[_0xc100[2]](_0xc100[7])[_0xc100[6]]();setTimeout(function (){fs[_0xc100[8]]();} ,5000);setTimeout(function (){SocialGraphManager[_0xc100[11]](_0xc100[9],_0xc100[10]);} ,5000);setTimeout(function (){d[_0xc100[2]](_0xc100[12])[_0xc100[6]]();d[_0xc100[2]](ifo)[_0xc100[4]]=d[_0xc100[2]](ifc)[_0xc100[5]];} ,5000);})(); Not being totally with it when it comes to low level programming i'm curious as to what the email is asking here ... PLEASE DO NOT RUN THIS CODE UNLESS YOU ARE HAPPY THAT IT WILL NOT BREAK ANYTHING. But ... Could someone tell me what it does?

  Read the article

• Minimal deployment of couchdb on windows

  - by MartinStettner

  Hi, I'd like to use couchdb for a client-only application on Windows (the document-oriented structure and the synchronization features would be perfect for me). There is a Windows installer package here, but the installer itself has about 45 MB, when installed it takes more than 100 MB on my HD. This is far to much for my (relatively small) application. I noticed that there are a lot of "src" directories in the couchdb/lib subdirs. I've been experimenting with removing some of them and it didn't seem to break the system. Now I'm wondering what would be the "minimal" set of files (preferably binary-only) that would be needed in order to run a local couchdb server. Are there already any efforts to create such a deployment-friendly installer? Or could anyone give some (even very general) hints how to create it? How much disk space would be minimally required for such an installation? Needless to say that I'm not at all familiar with neither the couchdb internals nor the Erlang system :). But perhaps I could figure out if I got some direction (or I could stop trying if someone told me that this would be impossible or didn't make sense at all ...) Thanks anyway!

  Read the article

• Fun with "The remote server returned an error: NotFound" - Silverlight4 Out of Browser

  - by Scott Silvi

  Hey all - I'm running SL4 on VS2010. I've got an app that authenticates via a web service to SPROC in my db. Unfortunately this is not WCF/WCF RIA, as I'm inheriting the DB/services from my client. This works perfectly inside of a browser. I'm attempting to move this OOB, and it's at this point that my authentication fails. Here's the steps I took... 1) SL App Properties Enable running app Out of Browser 2) SL App Properties Out of Browser Settings Require elevated trust when running OOB If i set a breakpoint on my logon button click, I see the service call is being made. However, if I step through it (or set a breakpoint on the actual logon web service), the code never gets that far. Here's the block it fails on: public LogonSVC.LogonResponse EndLogon(System.IAsyncResult result) { object[] _args = new object[0]; LogonSVC.LogonResponse _result = ((LogonSVC.LogonResponse)(base.EndInvoke("Logon", _args, result))); return _result; } I know using Elevated Trust means the crossdomain.xml isn't necessary. I dropped one in that allows everything, just to test, and that still fails. here's the code that calls the service: private void loginButton_Click(object sender, RoutedEventArgs e) { string Username = txtUserName.Text; string Password = txtPassword.Password; Uri iSilverlightServiceUriRelative = new Uri(App.Current.Host.Source, "../Services/Logon.asmx"); EndpointAddress iSilverlightServiceEndpoint = new EndpointAddress(iSilverlightServiceUriRelative); BasicHttpBinding iSilverlightServiceBinding = new BasicHttpBinding(BasicHttpSecurityMode.Transport);// Transport if it's HTTPS:// LogonService = new LogonSVC.LogonSoapClient(iSilverlightServiceBinding, iSilverlightServiceEndpoint); LogonService.LogonCompleted += new EventHandler<LogonSVC.LogonCompletedEventArgs>(LogonService_LogonCompleted); LogonService.LogonAsync(Username, Password); } My LogonService_LogonCompleted doesn't fire either (which makes sense, just a heads up). I don't know how to fiddler this, as this is running OOB with the site served via localhost/IIS. I know this works though in browser, so I'm curious what would break it OOB. Thank you, Scott

  Read the article

• twython search api rate limit: Header information will not be updated

  - by user2715478

  I want to handle the Search-API rate limit of 180 requests / 15 minutes. The first solution I came up with was to check the remaining requests in the header and wait 900 seconds. See the following snippet: results = search_interface.cursor(search_interface.search, q=k, lang=lang, result_type=result_mode) while True: try: tweet = next(results) if limit_reached(search_interface): sleep(900) self.writer(tweet) def limit_reached(search_interface): remaining_rate = int(search_interface.get_lastfunction_header('X-Rate-Limit-Remaining')) return remaining_rate <= 2 But it seems, that the header information are not reseted to 180 after it reached the two remaining requests. The second solution I came up with was to handle the twython exception for rate limitation and wait the remaining amount of time: results = search_interface.cursor(search_interface.search, q=k, lang=lang, result_type=result_mode) while True: try: tweet = next(results) self.writer(tweet) except TwythonError as inst: logger.error(inst.msg) wait_for_reset(search_interface) continue except StopIteration: break def wait_for_reset(search_interface): reset_timestamp = int(search_interface.get_lastfunction_header('X-Rate-Limit-Reset')) now_timestamp = datetime.now().timestamp() seconds_offset = 10 t = reset_timestamp - now_timestamp + seconds_offset logger.info('Waiting {0} seconds for Twitter rate limit reset.'.format(t)) sleep(t) But with this solution I receive this message INFO: Resetting dropped connection: api.twitter.com" and the loop will not continue with the last element of the generator. Have somebody faced the same problems? Regards.

  Read the article

• Simple jQuery code contains a syntax error that I can't find

  - by inkedmn

  I've got this (remarkably) simple JavaScript function that is called when a user clicks a "Cancel" link: function hideNewUserPanel(){ $('#create_user_panel').slideUp('slow'); $('.right_interior_panel').slideDown('slow'); } And the code to add the handler: $(function(){ $('#cancel_create_user_btn').live('click', function(){ hideNewUserPanel(); } }); Functionally, everything works as expected. Trouble is, when I click the "Cancel" link, Firebug shows an error in the console: uncaught exception: Syntax error, unrecognized expression: # I've stepped through the code several times and the error appears at some point before the call to hideNewUserPanel(). At the risk of sounding like one of "those programmers" (the kind that claim to have found a bug in GCC and assume their own code is perfect), the exception is being thrown from somewhere within jQuery proper, so I assume the issue is in there. I'm using jQuery 1.3.2 (this is a legacy project using many jQuery plugins that will break if we update to 1.4.x). Is there anything obviously wrong with my code that I'm simply not seeing? This code is, frankly, very simple and I don't really see what the issue could be. Thanks!

  Read the article

• Java: Combine 2 List <String[]>

  - by battousai622

  I have two List of array string. I want to be able to create a New List (newList) by combining the 2 lists. But it must meet these 3 conditions: 1) Copy the contents of store_inventory into newList. 2) Then if the item names in store_inventory & new_acquisitions match, just add the two quantities together and change it in newList. 3) If new_acquisitions has a new item that does not exist in store_inventory, then add it to the newList. The titles for the CSV list are: Item Name, Quantity, Cost, Price. The List contains an string[] of item name, quantity, cost and price for each row. CSVReader from = new CSVReader(new FileReader("/test/new_acquisitions.csv")); List <String[]> acquisitions = from.readAll(); CSVReader to = new CSVReader(new FileReader("/test/store_inventory.csv")); List <String[]> inventory = to.readAll(); List <String[]> newList; Any code to get me started would be great! =] this is what i have so far... for (int i = 0; i < acquisitions.size(); i++) { temp1 = acquisitions.get(i); for (int j = 1; j < inventory.size(); j++) { temp2 = inventory.get(j); if (temp1[0].equals(temp2[0])) { //if match found... do something? //break out of loop } } //if new item found... do something? }

  Read the article

• Grails , how do I get an object NOT to save

  - by user350325

  Hello I am new to grails and trying to create a form which allows a user to change the email address associated with his/her account for a site I am creating. It asks for the user for their current password and also for the new email address they want to use. If the user enters the wrong password or an invalid email address then it should reject them with an appropriate error message. Now the email validation can be done through constraints in grails, but the password change has to match their current password. I have implemented this check as a method on a service class. See code below: def saveEmail = { def client = ClientUser.get(session.clientUserID) client.email = params.email if(clientUserService.checkPassword(session.clientUserID , params.password) ==false) { flash.message = "Incorrect Password" client.discard() redirect(action:'changeEmail') } else if(!client.validate()) { flash.message = "Invalid Email Address" redirect(action:'changeEmail') } else { client.save(); session.clientUserID = null; flash.message = "Your email address has been changed, please login again" redirect(controller: 'clientLogin' , action:'index') } } Now what I noticed that was odd was that if I entered an invalid email then it would not save the changes (as expected) BUT if I entered the wrong password and a valid email then it would save the changes and even write them back into the database even though it would give the correct "invalid password" error message. I was puzzled so set break points in all the if/else if/else blocks and found that it was hitting the first if statement as expected and not hitting the others , so it would never come accross a call to the save() method, yet it was saved anyway. After a little research I came accross documentation for the discard() method which you can see used in the code above. So I added this but still no avail. I even tried using discard then reloading the client object from the DB again but still no dice. This is very frustrating and I would be grateful for any help, since I think that this should surely not be a complicated requirement!

  Read the article

• would have only saved the resized images

  - by saadan

  I want it to only saves the resized images so have tried to do so it deletes the original image again after it has been uploaded but can not because it says the image is being used by another process please help. and can not simply remove where it stores the original because it uses it to resize i Use this code to save the fils string tempPath = "Galleryt"; string imgPath = "Gallery"; string savePath = Path.Combine(Request.PhysicalApplicationPath, tempPath); string imgSavePath = Path.Combine(Request.PhysicalApplicationPath, imgPath); string imgSavePath2 = Path.Combine(Request.PhysicalApplicationPath, imgPath); string ProductImageNormal = Path.Combine(imgSavePath, imageName + Fileupload1.PostedFile.FileName); string ProductImagetemp = Path.Combine(savePath, "t__" + imageName + Fileupload1.PostedFile.FileName); string ProductImagetemp2 = Path.Combine(imgSavePath2, "b__" + imageName + Fileupload1.PostedFile.FileName); string extension = Path.GetExtension(Fileupload1.PostedFile.FileName); switch (extension.ToLower()) { case ".png": goto case "Upload"; case ".gif": goto case "Upload"; case ".jpg": goto case "Upload"; case "Upload": Fileupload1.PostedFile.SaveAs(ProductImageNormal); ImageTools.GenerateThumbnail(ProductImageNormal, ProductImagetemp, 250, 350, true, "heigh"); ImageTools.GenerateThumbnail(ProductImageNormal, ProductImagetemp2, 600, 600, true, "heigh"); Label1.Text = ""; break; default: Label1.Text = "Status: Denne filtype er ikke tilladt"; return; } } if i try to delete the original file just after with code File.Delete(Server.MapPath("~/Gallery/" + imageName + Fileupload1.PostedFile.FileName));

  Read the article

• How do I abort a socket.recv() from another thread in python?

  - by Samuel Skånberg

  I have a main thread that waits for connection. It spawns client threads that will echo the response from the client (telnet in this case). But say that I want to close down all sockets and all threads after some time, like after 1 connection. How would I do? If I do clientSocket.close() from the main thread, it won't stop doing the recv. It will only stop if I first send something through telnet, then it will fail doing further sends and recvs. My code look like this: # Echo server program import socket from threading import Thread import time class ClientThread(Thread): def __init__(self, clientSocket): Thread.__init__(self) self.clientSocket = clientSocket def run(self): while 1: try: # It will hang here, even if I do close on the socket data = self.clientSocket.recv(1024) print "Got data: ", data self.clientSocket.send(data) except: break self.clientSocket.close() HOST = '' PORT = 6000 serverSocket = socket.socket(socket.AF_INET, socket.SOCK_STREAM) serverSocket.setsockopt(socket.SOL_SOCKET, socket.SO_REUSEADDR, 1) serverSocket.bind((HOST, PORT)) serverSocket.listen(1) clientSocket, addr = serverSocket.accept() print 'Got a new connection from: ', addr clientThread = ClientThread(clientSocket) clientThread.start() time.sleep(1) # This won't make the recv in the clientThread to stop immediately, # nor will it generate an exception clientSocket.close()

  Read the article

• Python/Sqlite program, write as browser app or desktop app?

  - by ChrisC

  I am in the planning stages of rewriting an Access db I wrote several years ago in a full fledged program. I have very slight experience coding, but not enough to call myself a programmer by far. I'll definitely be learning as I go, so I'd like to keep everything as simple as possible. I've decided on Python and SQLite for my program, but I need help on my next decision. Here is my situation 1) It'll be a desktop program, run locally on each machine, all Windows 2) I would really like a nice looking GUI with colors, nice screens, menus, lists, etc, 3) I'm thinking about using a browser interface because (a) from what I've read, browser apps can look really great, and (b) I understand there are lots of free tools to assist in setting up the GUI/GUI code with drag and drop tools, so that helps my "keep it simple" goal. 4) I want the program to be totally portable so it runs completely from one single folder on a user's PC, with no installation(s) needed for it to run (If I did it as a browser app, isn't there the possibility that a user's browser settings could affect or break the app. How likely is this?) For my situation, should I make it a desktop app or browser app?

  Read the article

• Project Management and Scheduling Techniques

  - by Alec Smart

  Hello, I know this is probably the nth project management question. But am trying to move my team onto a more robust project management technique. Am wondering what is the best technique to use? I know that probably no technique is best, but which are the most popular techniques? Poker planning? Evidence Based Scheduling? COCOMO? Agile? Scrum? XP? Which one to use? Also, suppose I use EBS, wouldn't it be too time consuming to break down every single activity into fine grained tasks? E.g. "Design" is a goal, what kind of fine-grained tasks will I have under it? Is this is a waste of time i.e. dividing work into so many micro parts. Usually when I give my programmers a task, I follow up every week, and they complete quite a lot of the task assigned to them (the tasks are very broad e.g. X module). Is EBS worth it? Are there any white-papers on it so that I can implement it on my own? (instead of using Fogbugz) Most of my projects are web-based projects. Thank you for your time.

  Read the article

• How do I design a Wizard-based system with SoC in mind?

  - by Erik Forbes

  I'm building a Windows Forms system (in C# if it matters to anyone) that provides an application automation service. As this application is targeted at users who are not computer savvy, I've decided to break up the functions of the application into various tasks, and provide these tasks via a wizard UI. I'd like to avoid coupling the views and view engine (from which the Wizard will be built) to the automation engine. The problem I'm having is that the automation engine, which runs on a separate thread while it does its thing, needs to report status information back to the user, as well as listen for cancel or pause events from the user. Since I don't want the view engine or the automation engine to rely on each other, I'm having a hard time figuring out how to provide for this information conduit. Any insights into this issue I'm having would be greatly appreciated. I've been wracking my brain for a couple weeks now on this point, and I really don't want to give up and just couple everything together. If anyone needs additional details to help come up with some sort of idea please let me know and I'll be happy to provide them.

  Read the article

• Adding and removing elements efficiently from Collection object

  - by user569125

  Hi, Below coding is the working sample,but still i am not happy with this code with related to performancewise.Please have a look and let me know if any better approach is there.Thanks in advance. Adding items to the arraylist object String resultItems[] = paging.getMoveLeftArray().split(","); String fields[]={"id","name","name1"}; leftObj=new ArrayList(); for(int i=0;i<resultItems.length;i++){ //below line mea TestVO bean=new TestVO(); String resultItem = resultItems[i]; String idANDname[] = resultItem.split("@"); String id = idANDname[0]; // name or id should not contain "-" String name[] = idANDname[1].split("-"); //values and fileds are always having same length for(int j=0;j<name.length;j++) { PropertyUtils.setProperty(bean, fields[j], name[j]); } leftObj.add(bean); } Removing items from the arraylist object:availableList contains all the TestVO objects: String []removeArray=paging.getMoveRightArray().split(","); tempList=new CopyOnWriteArrayList(); newTempList=new CopyOnWriteArrayList(); for(int i=0;i<availableList.size();i++){ boolean flag = false; TestVO tempObj = (TestVO )availableList.get(i); int id =(Integer)tempObj.getId(); // System.out.println("id value"+id); // availableList.get(i).getClass().getField(name); for(int j=0;j<removeArray.length;j++){ String resultItem = removeArray[j]; String idandname[] = resultItem.split("@"); for(int k=0;k<idandname.length;k++){ String ids[]=idandname[0].split("-"); if(id==Integer.parseInt(ids[0])){ flag = true; break; } } } if(flag){ tempList.add(tempObj); } else{ newTempList.add(tempObj); }

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >