Search Results

Search found 8285 results on 332 pages for 'console'.

Page 182/332 | < Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >

• Windows Server 2003 not automatically assigning drive letter to external drives

  - by Chris

  My newly rebuilt Windows Server 2003 doesn't automatically assign drive letters to external usb devices. I have to manually open the Disk Management Console and assign it a drive letter every time. It does this with two different drives in all USB ports. I have been doing some reading and I don't have any network drives, I have also already tried USBDLM and it doesn't seem to have made any difference. Specs: ProLiant ML150 G5 with Windows 2003 Enterprise and all updates installed. Any ideas on what I can try to resolve this problem would be greatly appreciated. Chris

  Read the article

• Find BIOS update for HP Pavilion xt966

  - by NitroxDM

  I installed FreeNAS on a HP Pavilion xt966. Every three seconds or so I message comes up on the console. acpi_tz0: _TMP value is absurd, ignored (-270.2C) From what I have been able to find this is because of a bug in the BIOS... but I have yet to find an update for it. HP's site only shows drivers. FreeNAS is build on BSD. Anyone know where to find a BIOS update for this unit?

  Read the article

• Cannot login to XP SP3 in VMWarePlayer virtual machine in safe mode

  - by Alper

  Hello, Here is my setup Host OS: XP SP3 Guest OS: XP SP3 (using VMWare) I checked the /SAFEBOOT option in System Config utility in guest for troubleshooting. Now the guest OS boots up in Safe Mode but I cannot login with my user id/password. Here is what I tried: [domainName]\[userid] for user name = Login Fails Administrator with blank password = Login fails Safe Mode with Networking = Login fails Safe Mode with Command Prompt = Login fails Last Known Good Configuration = starts in safe mode, login fails Start Windows Normally = starts in safe mode, login fails Don't have cd to get to the recovery console Any ideas?

  Read the article

• How to start wuala on the linux commandline with auto login

  - by mit

  When i start wuala on the linux commandline like this, it logs me in and the folder is mounted: wualamcd login username password enableAutoLogin I can shut it down from another console typing wuala shutdown But how do I actually use the auto login that I just set using the enableAutoLogin switch? What is the command to start it again, so it logs in but does not need the password? I tried wualamcd login and wuala starts but no one gets logged in. Auto login in gui mode works fine. This is 32 bit linux with openjdk 6 JRE.

  Read the article

• Updating PHP on a Plesk managed Server

  - by mblaettermann

  I just updated PHP and MySQl on my VPS with the current Versions from Atomic Repo. Everything worked out fine so far. From console I get the new PHP 5.3: [root@server phpMyAdmin]# php -v PHP 5.3.16 (cli) (built: Aug 20 2012 11:18:05) Copyright (c) 1997-2012 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2012 Zend Technologies with the ionCube PHP Loader v4.0.5, Copyright (c) 2002-2011, by ionCube Ltd. But through Apache I still get the old version (5.1.6). The server is running some old version of crappy Plesk Panel. That gives me the option to choose between Apache Modul, fCGI and CGI-BIN. Any hints, how to update apache, so it will use the new PHP Version? EDIT: I just needed to restart httpd (/etc/init.d/httpd restart)

  Read the article

• SSH broken, segfault error 4

  - by trampi

  i cannot connect to my server via ssh, it throws me a "server unexpectedly closed connection" after entering the password. in var/log/messages the only noteable message is: Apr 14 17:41:23 s15410270 kernel: sshd[3602]: segfault at c0 ip 7f0801acbdb0 sp 7fff0adff860 error 4 in libc-2.8.so[7f0801a87000+14f000] Apr 14 17:41:29 s15410270 kernel: sshd[3606]: segfault at c0 ip 7f75f9463db0 sp 7fff027971f0 error 4 in libc-2.8.so[7f75f941f000+14f000] This message appears after a log in attempt via ssh or via sftp Its a SuSE Linux server. I'm looking for help where to start to search for the error, i can still act as root via a serial console. edit: "server unexpectedly closed connection" only appears if i enter the correct password!

  Read the article

• Could not open IPV6 addr on web browser

  - by vito

  I have ipv6 address fe80::21f:a4ff:fe91:2e44%4. This is the address of modem/router. I am unable to open this address in browser to view the web configuration. I am able to telnet to fe80::21f:a4ff:fe91:2e44%4, view the console UI & can do settings. I can also open 192.168.1.1(IPv4 address of modem/router) in browser. I tried [fe80::21f:a4ff:fe91:2e44] in all browsers like IE, Firefox & Chrome. It was not possible.

  Read the article

• Are there significant performance difference between chipsets?

  - by Let_Me_Be

  I wanted to build a single PC to fit all my needs, but since hardware virtualization support (Vt-d specifically) is a huge problem, I decided to build multiple single-use oriented computers. In this scenario I want these computers to be as minimal as possible. So the core of my question is: "Are there significant performance difference between chipsets?" I'm considering Sandy-Bridge i7 or i5 for my "game console" computer. And since I will use only one graphic card, one or two HDD, 4-8GB RAM and nothing else, I would be fine with a micro-ATX board with a Q67 (or some other low-end chipset).

  Read the article

• Using Internet Explorer 8 and 9 beta under internet options -advanced java does not show to check the box

  - by Michael Bishop

  I am using internet 8 and under internet options advanced there is not box to check to enable java. I was told to reset which did nto work. I have tried to uninstall java 6-21 32 bit but I get windows installer error 1723. I brought up the java console and made sure it was pointing to the right target. But I guess the main thing is I have no enable java under internet options, advanced. It was under security to enable java scripting. Any answers?

  Read the article

• GF 3.0.1 + Virtual Server: www.myhost.com:8080/projectname-war => www.myhost.com. How?

  - by Harry Pham

  I need to change www.myhost.com:8080/myproject-war to www.myhost.com. This is what I try. In admin console in Glassfish 3.0.1, I create a http-listener-3 with port 9090 and address 0.0.0.0 (I want to have port 80, but got access-denied or some sort). I then create a virtual server call scholar, with Id=scholar, Hosts=${com.sun.aas.hostName}, Network Listeners: http-listener-3, Default Web Module=project#project-war.war(it is the only option from the drop down list since I only deploy 1 app). Then under Applications, I set the virtual server of the application to be scholar. Save and restart. I try localhost:9090, and expecting that it will load my project like as if I type localhost:9090/project-war. But it does not. I already set the Default Web Module, to be the project, why doesnt it load the project by default?

  Read the article

• Using gnome-do as a dock

  - by Manu

  Hello, I've recently removed the bottom toolbar, in Ubuntu, and replaced it with gnome-do, using the "Docky" theme. Things looks nice, but I have a couple of questions : The dock doesn't differentiate between a shortcut and the application itself when launched. What if I want to launch more than one time that app ? (ie. the console). The dock shows all apps launched, not just the apps launched on that particular desktop. Can I change this behavior ? I haven't found it in the preferences. (image from the blog "OMG Ubuntu", http://d0od.blogspot.com/ )

  Read the article

• MySQL taking a long time to start

  - by Dscoduc

  I'm running Windows Server 2008 with MySQL installed and every time I reboot the server the MySQL Service doesn't start right away. A look into the Windows Eventlog shows that the MySQL Service was hung at startup. Looking at the Services.msc console shows the service state at Starting... Eventually, like 10 minutes, the MySQL Service actually finishes the startup process and the database becomes available for my Wordpress server... I looked at the MySQL .err files and didn't find anything that would indicate a delay in the statup process... Can anyone suggest a way to determine what is causing the delay, and more importantly, how to prevent the delay in the MySQL Startup?

  Read the article

• Exchange ActiveSync does not work for one user

  - by jshin47

  One particular user in our system is unable to connect to Exchange ActiveSync via her iPhone. When I try to connect using my own credentials on her iPhone it works (everything begins syncing), but when I input her credentials, the Settings app verifies the credentials are correct but nothing syncs. For example, if I open Mail, no items are shown. When I attempt to force a sync, it says "Cannot connect to server." In Exchange 2010 Management Console the user is no different than the others. Exchange ActiveSync is set as "Enable" in Mailbox Features. EDIT: Alternatively, if there is some easy way to create a new useraccount/mailbox and copy all of the contents of the old one over, I bet it would work, and that would be fine as well. She is a Mac user so we do not have to worry about her Active Directory account.

  Read the article

• How to perform diagnostics (stress test) on HP Smartarray Controller

  - by pepoluan

  At my office, we have a server that we suspect its RAID controller (HP Smartarray) is failing. A cold boot, however, does not indicate anything. Can anyone recommend me a method to stress-test the controller? Symptoms that makes me suspect a failing controller: Disk access getting slower, queue getting longer Running dmesg on the XenServer console I see many messages similar to this one: end_request: I/O error, dev tda, sector 253655584 (the sector number is never the same) When we move the VM to another physical host, we no longer see the above message Running idle (without any running VM), the dmesg no longer emit the above message A search on Google indicated that the above message is most commonly associated with a failing SmartArray controller. How can I be sure that the SmartArray controller is failing?

  Read the article

• Juniper J4350 out of order

  - by Benjamin Baron

  I have got two (2) Juniper routers J4350 that are out of order : All the interfaces are down (leds on the interfaces don't ligthen, ping dosen't respond) No output on the console port (even when booting) I've tried to reset the router (holding the RESET CONFIG button on the front panel during 15 seconds) and nothing happened, even while booting the device I've opened the router to check the fans. I've removed some dust and nothing has changed. I wanted to precise that the leds on the front panel are all on: The POWER led is green The STATUS led is red The ALARM led is on and is orange The HA (High Availablity) is on and orange as well I have found nothing on the Internet to solve this problem... Thank you for helping me :)

  Read the article

• Routing and Remote Access Port Mapping not applied to localhost

  - by Computer Guru

  Hi, I've set up Routing and Remote Access (Windows Server 2003) to forward publicip:80 to a server on the private internal network, and that's working great. Incoming requests from the internet to port 80 are correctly forwarded to our internal web server and everything is fine. However, requests on the server itself are not being forwarded. That is, if I open a console window and type "telnet publicip 80" from the server on publicip, the request is not forwarded to the private server. I understand that in RRAS I've mapped port 80 on the public interface to the private server and that's why it's not working; but I don't know how to configure it so that requests from the local PC are also forwarded to the private server. I'd appreciate any help or feedback on the matter. Thanks!

  Read the article

• windows server secondary plex or windows server default

  - by shiva

  I am new to handling issues on server. when my system tried to reboot I could see two installables to boot from. windows server 2012- current os windows server secondary plex. So when ever there is a system restart the system it stops at this screen. And since I am connecting to this server using RDP I have to wait for the hetzner console to click on of the os to boot. Even though the current os is set as default and time given is 30 sec, it still waits for a user input. So I want to know which of the two should I be using to boot and I just want one os.

  Read the article

• Encrypt remote linux server

  - by Margaret Thorpe

  One of my customers has requested that their web server is encrypted to prevent offline attacks to highly sensitive data contained in a mysql database and also /var/log. I have full root access to the dedicated server at a popular host. I am considering 3 options - FDE - This would be ideal, but with only remote access (no console) I imagine this would be very complex. Xen - installing XEN and moving their server within a XEN virtual machine and encrypting the VM - which seems easier to do remotely. Parition - encrypt the non-static partitions where the sensitive data resides e.g. /var /home etc. What would be the simplist approach that satisfies the requirements?

  Read the article

• Why do I have no TTY on a basic Ubuntu 9.10 server install?

  - by pr1001

  I have reinstalled Ubuntu 9.10 Server several times on a bog standard 1RU server and each time I finish the install and reboot I see GRUB run and am then presented with a black screen. The machine is running just fine, as I am able to SSH in, but I can't see anything on the attached monitor. I have a simple LCD screen connected via VGA and a signal is apparently being output to it, as it doesn't go asleep. Looking at /var/log/syslog I see: Mar 24 14:57:44 bridge5 rsyslogd-2039: Could no open output file '/dev/xconsole' [try http://www.rsyslog.com/e/2039 ] However, I later see: Mar 24 14:57:44 bridge5 kernel: [ 0.001368] console [tty0] enabled Any thoughts? Thanks!

  Read the article

• Upgrading Fedora 16 to 17 with crypted LVM

  - by nijansen

  As the title suggests, I want to upgrade Fedora 16 to the Fedora 17 Alpha build, but I am struggling to do so because of my crypted HDD. To avoid the hustle of CD-ROM or USB install, I thought the preupgrade would be a good idea. It downloads the stuff, stores an image somewhere and creates an entry in my boot manager. When I choose to upgrade from the boot manager it crashes halfway through because it can not access any of the prepared files (because it's crypted) and hands me a debug console. Unfortunately, this case apparently is not covered by the Fedora troubleshooting advice, at least I was not able to find anything there. I would guess I have to mount my HDD manually, but 1) how? and 2) how do I resume the upgrade afterwards? I would really appreciate a push in the right direction.

  Read the article

• Ubuntu 12.04 blank screen after login

  - by kgthenerd

  I just installed Ubuntu 12.04 LTS 64 bit on a machine, everything went well accordingly but after login it just gives me a blank screen. During startup after BIOS message it shows "Out of range" error and comes to login window after logon it's just a blank screen. even after somehow it comes to an empty desktop screen i dont see the Unity bar or anything like that (Can change wallpaper, and system setting though). And can't goto Console mode by pressing Ctrl+Alt+F1 - it returns "Out of range" error. System is new AMD Sempron with 2 Gigs of RAM has NVIDIA GeForce 6150SE-based graphic chipset. any ideas on this?

  Read the article

• Cisco 877 as PPPoA/PPPoE bridge (no routing) - how to make it listen to IP for management?

  - by Ingmar Hupp

  I have a Cisco 877 configured to bridge ADSL with PPPoA to PPPoE on Vlan1. This works fine, but in this mode the only way I can configure the Cisco is via the serial console. I'd like to have the Cisco also listen on an IP address so I can telnet/ssh into it. I think the right way to go about this would be via bridge irb, but I'm not sure exactly how (or if that's even the right direction). IOS is 12.4T and my current config (cut down to essentials) is: no ip routing no ip cef ! ! interface ATM0 no ip address no ip route-cache no atm ilmi-keepalive pvc 0/38 encapsulation aal5snap ! dsl operating-mode auto bridge-group 1 ! ! interface Vlan1 no ip address no ip route-cache bridge-group 1 Just setting an IP address on Vlan1 didn't have the desired effect, but surely this must be possible somehow (the Draytek Vigor 120 even does it by default).

  Read the article

• Experience with MQ File Transfer Edition?

  - by mfinni

  We've got several processes that move files across servers - SFTP, FTP, SCP; Windows, Linux, AIX; there is a workflow component (usually require a control file with filenames and hash values to move a batch of related files). The action is often initiated on our servers to get the files, so we need to make sure they're done being written. We have some homegrown scripts to do this, but they don't always work properly, and troubleshooting, maintenance, and log review is not easy this way. There's a lot of servers, and our scripts don't have central logging or a dashboard/console/etc. We're looking into commercial products to do this. Has anyone used MQ File Transfer Edition? Another team in our company is using Aspera, does anyone have any thoughts on that, or other favored products? I have no idea what our budget is for this, yet. Just trying to get a handle on the product space from the perspective of other admins.

  Read the article

• Java Issues in Microsoft Internet Explorer & Firefox with Java 6 Standard

  - by sxanness

  I have a user on Windows XP SP3 running Java 6 Standard Edition Update 20 (build 1.6.0_20-b02). The issue is that when Java applets load the Java splash screen is very shaky (I will have to take a screenshot if you don't know what I am talking about) and than the Java applet screen does not show properly. The Applet we use most is for a security camera and you can't view the camera properly because of the Java issues. I have uninstalled Java and re-installed and still having the same issue. I do not see any errors on the Java Console, and this only happens on his computer I am running the same version of Java and the browsers and do not have the same issue on my machine.

  Read the article

• How can I upgrade bash to >= 4.1 on CentOS 5.5?

  - by Agvorth

  I have a CentOS 5.5 VPS server. I want to use RVM. According to the console output when I run the RVM installer, RVM requires bash = 4.1. I just ran yum update. My bash version is now 3.2.25. If I understand how yum works, that means that 3.2.25 is sort of the version of bash that "belongs with" my CentOS version, and it's the latest version I can get using yum. (Right? Or am I wrong about this?) How can I get that on my CentOS 5.5 system? To clarify, I understand that I can just download the source and install, but I'm hesitant to break out of yum's version management system. Is there a way to upgrade bash without disrupting yum?

  Read the article

< Previous Page | 178 179 180 181 182 183 184 185 186 187 188 189  | Next Page >