Search Results

Search found 6258 results on 251 pages for 'power coder'.

Page 183/251 | < Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >

• Screen going black, further investigation reveals healthy ram and hard disk, and several kernel oops logs

  - by Virulan

  Six days ago, I went to go take a shower, and I suspended Ubuntu as usual, to save battery life. I came back, and the screen was black. REISUB and general fiddling around did nothing. Restarted, and still had nothing on the screen. Since then, this has happened several times, and the only fix is to 1) force shut laptop, 2) take out battery, 3) hold power button, 4) put battery back in, 5) boot. I have investigated further into the matter, doing a ram test and a hard disk check. Both turned out fine, but then my attention turned towards the error messages I was receiving upon bootup, the whole "System program problem detected" dealio. I did some digging and found four kernel oops logs in my /var/crash. What I can understand of them points to two things, 1) they are connected to my suspending problems, since there are four them (I have had four suspending crashes), and they both confirm that there was a issue with waking up from suspend, and 2) the crashes might have to do with Python (possibly could be jumping to conclusions), since mentions of Python are peppered throughout the logs. At this point, I am unsure of how to continue, and I have come here for help. Is there any way I can fix this? Should I start by uploading the logs here?

  Read the article

• Cheap ways to do scaling ops in shader?

  - by Nick Wiggill

  I've got an extensive world terrain that uses vec3 for the vertex position attribute. That's good, because the terrain has endless gradations due to the use of floating point. But I'm thinking about how to reduce the amount of data uploaded to the GPU. For my terrain, which uses discrete / grid-based vertex positions in x and z, it's pretty clear that I can replace my vec3s (floats, really) with shorts, halving the per-vertex position attribute cost from 12 bytes each to 6 bytes. Considering I've got little enough other vertex data, and an enormous amount of terrain data to push into the world, it's a major gain. Currently in my code, one unit in GLSL shaders is equal to 1m in the world. I like that scale. If I move over to using shorts, though, I won't be able to use the same scale, as I would then have a very blocky world where every step in height is an entire metre. So I see these potential solutions to scale the positional data correctly once it arrives at the vertex shader stage: Use 10:1 scaling, i.e. 1 short unit = 1 decimetre in CPU-side code. Do a division by 10 in the vertex shader to scale incoming decimetre values back to metres. Arbirary (non-PoT) divisions tend to be slow, however. Use (some-power-of-two):1 scaling (eg. 8:1), which enables the use of a bitshift (eg. val >> 3) to do the division... not sure how performant this is in shaders, though. Not as intuitive to read values, but possibly quite a bit faster than div by a non-PoT value. Use a texture as lookup table. I've heard that this is really fast. Or whatever solutions others can offer to achieve the same results -- minimal vertex data with sensible scaling.

  Read the article

• Oracle OpenWorld 2012

  - by Maria Colgan

  I can't believe it's time for OpenWorld again! Oracle OpenWorld is the largest gathering of Oracle customers, partners, developers, and technology enthusiasts. This year it will take place between September 30th and October 4th in San Francisco. Of course, the Optimizer development group will be there and you will have multiple opportunities to meet the team, in one of our technical sessions, or at the Oracle Database demogrounds. This year the Optimizer team has 2 technical sessions, as well as a booth in the Oracle Database demogrounds. Tuesday, October 2nd at 1:15pm Oracle Optimizer: Harnessing the Power of Optimizer Hints Session CON8455 at Moscone South - room 103 In this session we will discuss in detail how optimizer hints are interpreted, when they should be used, and why they sometimes appear to be ignored. Thursday, October 4th at 12:45pm Oracle Optimizer: An Insider’s View of How the Optimizer Works Session CON8457 at Moscone South - room 104This session explains how the latest version of the optimizer works and the best ways you can influence its decisions to ensure you get optimal execution every time. It will also include a full history of the Cost Based Optimizer, so make sure you stick around for this one! If you have burning Optimizer or statistics related questions, or if you just want to pick up an Optimizer bumper sticker, you can stop by the Optimizer demo booth. This year we are located in booth 3157, in the Database area of the demogrounds, in Moscone South. Members of the Optimizer development team will be there Monday through Wednesday from 9:45 am until 6pm. The full Oracle OpenWorld catalog is on-line, or you can browse by speakers by name. So start planning your trip today! +Maria Colgan

  Read the article

• Leadership Tip&ndash;Vent Up!

  - by D'Arcy Lussier

  Leadership is difficult, for many reasons. One of those reasons is that we not only need to keep ourselves motivated when difficult or challenging times come, but we also need to motivate our teams and keep them focussed on the tasks at hand regardless of the mortars being rained down around them. Inexperienced (and experienced) leaders can fall into the “me-too” mentality – that is, the leader sees themselves as part of the team member instead of the leader of the team. Once a leader changes the teams view that he/she is a peer and not the leader, dynamics can change on the team. One of the biggest dangers is that the leader starts sharing frustrations, fears, concerns, etc. with the team that they’re supposed to be leading on to victory. This can destroy a team’s morale and productivity. One simple thing you can do to counter this is remember this rule when it comes to venting: Vent Up! Don’t vent sideways or down, vent up. Vent to the people above you – they’re the ones that tend to have the power to actually change things anyway. You as a leader stay healthy by getting your frustrations and concerns off your chest, your team is still insulated from it, and your superiors are aware of issues that need to be addressed or can coach you through the obstacles. D

  Read the article

• How do I add more than one command to /etc/rc.local?

  - by Andreas

  I want to add two power saving commands to /etc/rc.local file. This to dissable bluetooth: rfkill block bluetooth And this to reduce screen brightness: echo 3024 > /sys/class/backlight/intel_backlight/brightness Separately added to /etc/rc.local they work but not both of them together like this: #/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. echo 3024 > /sys/class/backlight/intel_backlight/brightness rfkill block bluetooth exit 0 How do I add the two commands to get them properly executed at start-up? Update It turned out to be a timing issue. I fixed it by delaying the execution of the first command thus: (sleep 5; echo 3021 > /sys/class/backlight/intel_backlight/brightness)&

  Read the article

• How to disable discrete GPU using NVIDIA drivers?

  - by penzoiders

  I have a DELL studio XPS 13 (aka 1340) as of 12.04 most things run smoothly out of the box, but I have some power draining and warmness issues (if not to be called terrible heat issues) The system came with a NVIDIA GeForce 9500M (which has Hybrid SLI) and it shows up in "lspci" as these 2 cards 02:00.0 VGA compatible controller: NVIDIA Corporation G98 [GeForce 9200M GS] (rev a1) 03:00.0 VGA compatible controller: NVIDIA Corporation C79 [GeForce 9400M G] (rev b1) I had to install nvidia-current over noveau driver 'cause noveau does freeze the system after suspension. By installing nvidia-current and running nvidia-xconfig the resume process after suspension is fixed. By the way both with nvidia-current and noveau the system drains a lot of battery and heats up a lot. I suppose this is because the discrete GPU is always on. I don't really need 3D graphics on this system, if not the minimal to run unity and compiz for window management. So my question is: How do I disable, using nvidia-current, the discrete GPU 9200M and use only the integrated one 9400M? notes: In BIOS I have no option to disable discrete GPU This I think is not applicable because of the suspension-freeze issue (with noveau): https://help.ubuntu.com/community/HybridGraphics I've found this but I don't know which --sli option I should choose to fit my needs: http://manpages.ubuntu.com/manpages/hardy/man1/nvidia-xconfig.1.html My system has not optimus or cuda, but anyone can tell me if bumblebee can work for me?

  Read the article

• How do I stop video tearing? (Nvidia prop driver, non-compositing window manager)

  - by Chan-Ho Suh

  I have that problem which seemingly afflicts many using the proprietary Nvidia driver: Video tearing: fine horizontal lines (usually near the top of my display) when there is a lot of panning or action in the video. (Note: switching back to the default nouveau driver is not an option, as its seemingly nonexistent power-management drains my battery several times faster) I've tried Totem, Parole, and VLC, and tearing occurs with all of them. The best result has been to use X11 output in VLC, but there is still tearing with relatively moderate action. Hardware: MacBook Air 3,2 -- which has an Nvidia GeForce 320M. There are two common fixes for tearing with Nvidia prop drivers: Turn off compositing, since Nvidia proprietary drivers don't usually play nice with compositing window managers on Linux (Compiz is an exception I'm aware of). But I use an extremely lightweight window manager (Awesome window manager) which is not even capable of compositing (or any cool effects). I also have this problem in Xfce, where I have compositing disabled. Enabling sync to VBlank. To enable this, I set the option in nvidia-settings and then autostart it as nvidia-settings -l with my other autostart programs. This seems to work, because when I run glxgears, I get: $ glxgears Running synchronized to the vertical refresh. The framerate should be approximately the same as the monitor refresh rate. 303 frames in 5.0 seconds = 60.500 FPS 300 frames in 5.0 seconds = 59.992 FPS And when I check the refresh rate using nvidia-settings: $ nvidia-settings -q RefreshRate Attribute 'RefreshRate' (wampum:0.0; display device: DFP-2): 60.00 Hz. All this suggests sync to VBlank is enabled. As I understand it, this is precisely designed to stop tearing, and a lot of people's problem is even getting something like glxgears to output the correct info. I don't understand why it's not working for me. xorg.conf: http://paste.ubuntu.com/992056/ Example of observed tearing::

  Read the article

• external hard drive not detected after ubuntu crash [restarting machine]

  - by Netmoon

  today i tried to watch movie [with vlc media player] from my external hard drive [expansion portable 500 GB], and it's play good, then pause the movie and play it again, and my Ubuntu crashed! [Ubuntu 12.04]i had to restart the machine, so did it, but after that Ubuntu can't recognize this hard drive! i changed USB cable but it was not effective. this is my dmesg command result : [ 191.281630] usb 2-1.3: new full-speed USB device number 9 using ehci_hcd [ 191.353527] usb 2-1.3: device descriptor read/64, error -32 [ 191.529115] usb 2-1.3: device descriptor read/64, error -32 [ 191.704669] usb 2-1.3: new full-speed USB device number 10 using ehci_hcd [ 191.776524] usb 2-1.3: device descriptor read/64, error -32 [ 191.952202] usb 2-1.3: device descriptor read/64, error -32 [ 192.127772] usb 2-1.3: new full-speed USB device number 11 using ehci_hcd [ 192.534742] usb 2-1.3: device not accepting address 11, error -32 [ 192.606749] usb 2-1.3: new full-speed USB device number 12 using ehci_hcd [ 193.013696] usb 2-1.3: device not accepting address 12, error -32 [ 193.013906] hub 2-1:1.0: unable to enumerate USB device on port 3 note: I am able to hear the sound of the external drive lens. When attach hard drive to usb port, the status light goes on, but it's low bright and i think its power is low! try to mount in Microsoft Windows 7, but nothing happened.

  Read the article

• Will Unity skills be interchangeable?

  - by Starkers

  I'm currently learning Unity and working my way through a video game maths primer text book. My goal is to create a racing game for WebGL (using Three.js and maybe Physic.js). I'm well aware that the Unity program shields you from a lot of what's going on and a lot of the grunt work attached to developing even a simple video game, but if I power through a bunch of Unity tutorials, will a lot of the skills I learn translate over to other frameworks/engines? I'm pretty proficient at level design with WebGL, and I'm a good 3D modeller. My weaknesses are definitely AI and Physics. While I am rapidly shoring up my math, and while Physics is undeniably interesting there's only so many hours in the day and there's a wealth of engines out there to take care of this sort of thing. AI does appeal to me a lot more, and is a lot more necessary. AI changes drastically from game to game, is tweaked heavily during development, and the physics is a lot more constant. Will leaning AI concepts in Unity allow me to transfer this knowledge pretty much anywhere? Or will I just be paddling up Unity creek with these skills?

  Read the article

• Oracle Partner Days and Oracle Days are coming to an EMEA city near you!

  - by Javier Puerta

  Oracle Partner Days A new round of Oracle Partner Days is coming to a large number of European cities. These events are exclusive for Oracle partners and will deliver to you real Business return on your OPN membership.You will hear the business opportunities coming from the adoption of the entire Oracle stack, the latest products value propositions and related sales strategy and be able to connect directly with Oracle executives and find new business opportunities with other partners in your region.The EMEA Oracle Partner Days are Local/Regional live events targeting the key contacts in sales and consultancy delivering Oracle strategy, engaging around the several perspectives of the Oracle portfolio, executive keynotes and deep dive Business content-related breakout sessions. The first city will be Frankfurt, on Oct. 29. Check the full list to find an Oracle Partner Day in a city near you. Oracle Days Oracle Days will be hosted after Oracle OpenWorld across EMEA, along October and November. By attending an Oracle Day, customers and partners can: Learn about how to leverage the power of the Oracle stack, by hearing customer case studies about successful business transformation, and by following cross-stack solution tracks within the agenda Discuss key issues for business and IT executives in cloud, big data, social, and mobile solutions, and network with peers who are facing the same challenges Meet Oracle experts and watch live demos of new products Get the latest news from Oracle OpenWorld. See full calendar and cities here

  Read the article

• Single-developer GIT workflow (moving from straightforward FTP)

  - by melat0nin

  I'm trying to decide whether moving to VCS is sensible for me. I am a single web developer in a small organisation (5 people). I'm thinking of VCS (Git) for these reasons: version control, offsite backup, centralised code repository (can access from home). At the moment I work on a live server generally. I FTP in, make my edits and save them, then reupload and refresh. The edits are usually to theme/plugin files for CMSes (e.g. concrete5 or Wordpress). This works well but provides no backup and no version control. I'm wondering how best to integrate VCS into this procedure. I would envisage setting up a Git server on the company's web server, but I'm not clear how to push changes out to client accounts (usually VPSes on the same server) - at the moment I simply log into SFTP with their details and make the changes directly. I'm also not sure what would sensibly represent a repository - would each client's website get their own one? Any insights or experience would be really helpful. I don't think I need the full power of Git by any means, but basic version control and de facto cloud access would be really useful.

  Read the article

• Another hibernation question

  - by GeekOfTheWeek

  I installed Ubuntu on my Windows 7 Sager laptop using Wubi. Hibernate (i.e. suspend to disc) is not an option from the power icon, only suspend, shutdown, etc. Hibernate is also not an option from my battery/lid close options. I understand that hibernation is disabled by default in Ubuntu 12.04. I tried running pm-hibernate but I get the following message: Looking for splash system... none s2disk: Snapshotting system and then the computer just hangs with a black screen. According to the documentation here if this fails then I can't enable hibernate but it offers no help in making pm-hibernate succeed. Could swap be my problem? It looks like I have very small swap: user@ubuntu:~$ cat /proc/swaps Filename Type Size Used Priority /host/ubuntu/disks/swap.disk file 262140 0 -1 The advice on SwapFaq is only for the author's set up (e.g. I don't have an Ubuntu install disk since I used Wubi) and he says that 'INFO: This will not work for 12.04, resume from hibernate work differently in 12.04.' Any advice? I really need to get hibernate working to use my laptop as a, er, laptop. Thanks

  Read the article

• Solutions for cheaply replacing poorly-supported onboard ATI card with discreet graphics on desktop machine?

  - by echo-flow

  I have put Ubuntu on my mum's desktop computer. Unfortunately, the open source radeon driver does not work well with the onboard ATI graphics, and ATI's proprietary driver no longer supports the hardware at all. In order to use the ATI proprietary driver with this hardware, it is necessary to use an older version of Xorg, which is now only available in versions of Ubuntu older than 8.10. Unfortunately, the open source radeon driver seems to be causing X to lock up intermittently when my mum uses Audacity. I'm willing to accept that some hardware is not well-supported on Ubuntu, and so, because this is a desktop computer with a couple of free PCI slots, I think a better solution might simply be to plug in a new graphics card that might have better driver support, and to disable the onboard ATI card in the BIOS. The requirements for this card are that it be inexpensive and have robust (preferably open source) driver support in Ubuntu 10.04. Heavy-duty graphics processing power is not a requirement. A second-hand card on Ebay would also be fine. Can anyone make some recommendations?

  Read the article

• Moving From IT to Embedded software Developing

  - by Ameer Adel

  i worked for two years at a channel station, managing various Types of tasks, varying from printers installation, software solution, down to managing and maintaining server automation, to be honest, i always been enthusiastic about programming, i studied at some affordable college and finished my IT path successfully, my graduation project was in C# ADO.NET couple of years ago. Obviously it was so much of a beginner spaghetti code than a well furnished code. I also had the chance; after leaving the IT career, to study about some ASP.NET MVC and web apps development. I have rookie level of coding skills due to the poor level of education i endured, and sufficient resources. Currently i m working as a trainee in a newly opened embedded software development company, that is being said, i am, as i sound, have a little idea about the algorithms included, as i was reading for the past couple of days, embedded system development requires more strict coding skills, including memory management, CPU optimization according to its architect, and couple of other tricks regarding the display, and power management if mobile.. etc. My question is, What type of Algorithms am i supposed to use in such cases, as i mentioned before, i am really enthusiastic about learning programming skills and algorithms related to embedded systems and programming languages, including C/C++, Java, C#, and some EC++ if still operational.

  Read the article

• Can't Log Into Ubuntu 12.04

  - by Razick

  Yesterday, after turning on Ubuntu, I logged into a Gnome session. A few minutes later, I tried switching to Unity for a change. Unfortunately, the background and my desktop icons loaded, but the system bar and launcher failed to load even after several minutes. Unity had always worked fine for me. I then tried the guest account, and it worked fine on both Unity and Gnome. However, the problem with my account got worse; I couldn't log into any desktop at all anymore. I would type in my password and press enter and it would just sit there doing nothing. The computer no longer responded in any way, so I had to hold the power button and reboot. The same problem happened repeatedly. Earlier today, I tried to get on again. I found that I hadthe same problem, when I tried to log in, the computer no longer locked up, but instead flashed a black screen with theconsole output and what seemed to be an error message before returning to the log in screen. It was to quick for me to read, about 1/4-1/2 second. I'd really appreciate some help as I have some important files that are not backed up yet. I can't transfer the files to a new account, or even make a new account because I tried taking the password off my account so now I can't authenticate from the guest to perform root functions. I'd really appreciate some help as I have some important files that are not backed up yet. Thanks.

  Read the article

• Allow non-sudo group to control Upstart job

  - by Angle O'Saxon

  I'm trying to set up an Upstart job to run on system startup, and that can also be started/stopped by members of a group other than sudo. With a previous version, I usedupdate-rc.d and scripts stored in /etc/init.d/ to get this working by adding %Group ALL = NOPASSWD: /etc/init.d/scriptname to my sudoers file, but I can't seem to get an equivalent working for Upstart. I tried adding %Group ALL = NOPASSWD: /sbin/initctl start jobname to the sudoers file, but trying to run the command start jobname produces this error: start: Rejected send message, 1 matched rules; type="method_call", sender=":1.21" (uid=1000 pid=5148 comm="start jobname " interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply="0" destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init") As near as I can tell, that's a complaint about how my user account isn't given the power to send 'Start' messages in the D-Bus config file for Upstart. I haven't been able to actually find any information on how to edit that file to give a group permission to access a specific service--does such an option exist? Is there a way to edit the Sudoers file so I can run the job without editing the config file? Am I better off just sticking with the previous version?

  Read the article

• Modular building technique with angles? (A roof)

  - by Mungoid

  Ive been spending a bit of time lately studying the modular buildings of many games and reading/viewing several tutorials about it as well, but almost every example I see uses a plain square building that does not have any angled roof or similar. In all my applications (CS6, Blender/Max, UDK) I adhere to the same grid spacing and I get pretty good results, but trying to make modular angled pieces is confusing me as I'm not sure the best way to approach it. Below is some shots of my template sheet and workflow I have been doing. Should I do the roof separately or is it possible for me to keep it in the same texture sheet? The main issue is below. I have made a couple modular roof pieces but when i try to use them, i end up needing to model multiple other parts to fill gaps based on what roof shape i want. I then model those 'filler' pieces and now i have that much less space left in my texture sheet and those pieces are usually not that reusable for anything else. This is where im not sure how to proceed. If anyone has any links to documents or papers talking about this or advice, I would greatly appreciate it! =-) My main roof pieces with the gaps My power of 2 texture sheet, with 16x16 grid squares. The texture sheet loaded into blender on a 16x16 plane and starting to separate and extrude.

  Read the article

• Setting console resolution in Ubuntu Server 13.10 within VMware

  - by user205625

  I've completed an install of Ubuntu Server 13.10 within VMware and am running into a problem configuring the console (non-graphical) resolution. When I was running Ubuntu Server 13.04, I ran into the same problem... posted the question here, which I later solved by editing /etc/default/grub thus: GRUB_CMDLINE_LINUX_DEFAULT="splash vga=789" I then ran sudo update-grub, sudo reboot and 13.04 stuck in a larger-size console mode... just what I wanted. BUT when I run the same commands in 13.10, during the reboot it changes to the new screen-res, BUT the screen stays black and I can't interact with it. I power down the VM, go back to a previous snapshot, and try again... and again. Since the hwinfo package is no longer available, I can't run sudo hwinfo --framebuffer to see what options are available. Ideas anyone? Here are the uncommented settings in my /etc/default/grub file at this moment: GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=false GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=lsb_release -i -s 2> /dev/null || echo Debian GRUB_CMDLINE_LINUX_DEFAULT="splash" GRUB_CMDLINE_LINUX="find_preseed=/preseed.cfg" GRUB_DISABLE_LINUX_RECOVERY=false GRUB_GFXMODE=800x600

  Read the article

• Turn a Kindle into a Weather Display Station

  - by Jason Fitzpatrick

  The e-ink display, network connectivity, and low-power consumption of Kindle ebook readers make them a perfect candidate for an infrequently refreshed high-visibility display–like a weather display. Read on to see how to hack a Kindle to serve up the local weather. Tinker and hardware hacker Matt Petroff hacked his Kindle to accept input from a web server and then, graciously and in the spirit of geeky projects everywhere, shared his source code. He explains the heart of the project: The server side of the system uses shell and Python scripts to convert weather forecast data into an image for the Kindle. The scripts first download and parse forecast data from NOAA via the National Digital Forecast Database XML/SOAP Service. After parsing the data, the data then needs to be converted into an image. This is accomplished by preprocessing a specially crafted SVG file to insert temperatures, forecast symbols, and days of the week. This SVG is then rendered as a PNG using rsvg-convert and converted to a grayscale, no transparency color space as required by the Kindle using pngcrush. Finally, it is copied to a public location on the web server. The Kindle is set to refresh twice a day (you could easily tweak the scripts for a more frequent refresh) and displays the forecast as seen in the photo above–with crisp and easy to read text and icons. Hit up the link below for more information and the project’s source code. How To Create a Customized Windows 7 Installation Disc With Integrated Updates How to Get Pro Features in Windows Home Versions with Third Party Tools HTG Explains: Is ReadyBoost Worth Using?

  Read the article

• Laptop battery charging capacity reduced to 52%

  - by omjaijagdish

  I have been using Ubuntu 11.04 on DELL Inspiron 14R (N5010) laptop for last three months. Before I switch to ubuntu my laptop battery used to give 2.5 hrs to 3 hrs back-up. But since I have been using ubuntu, it has been reduced to 1hr to 1.5 hrs at max. I tried following commands: $ cat /proc/acpi/battery/BAT0/state which gave result as present: yes capacity state: ok charging state: charged present rate: 1 mA remaining capacity: 4400 mAh present voltage: 12407 mV then I tried $ acpi -b the result was.. Battery 0: Unknown, 100% when I gave command as $ upower -i /org/freedesktop/UPower/devices/battery_BAT0 the result was.. native-path: /sys/devices/LNXSYSTM:00/device:00/PNP0C0A:00/power_supply/BAT0 model: DELL W7H3N08 serial: 7114 power supply: yes updated: Sat Nov 24 11:25:34 2012 (21 seconds ago) has history: yes has statistics: yes battery present: yes rechargeable: yes state: fully-charged energy: 48.4748 Wh energy-empty: 0 Wh energy-full: 48.4748 Wh energy-full-design: 48.9595 Wh energy-rate: 0.011017 W voltage: 12.408 V percentage: 100% **capacity: 52.9253%** technology: lithium-ion Someone please let me know, what is going wrong with my laptop? How can I get charging with full capacity?

  Read the article

• No keyboard after suspend, even after hard reset

  - by subatomics

  all. While I was using a Ubuntu 9.1 live CD, I put the computer (Toshiba Satellite C655) into standby. After I resumed, the keyboard stopped functioning, though the mouse (USB) still worked. I decided to turn off the computer, but after Ubuntu shuts down, it asks you to press "enter" to actually turn the machine off. The keyboard was still dead, so I all I could do was use the on/off switch to power down the computer. Now, when I try to boot the computer, nothing happens. Before this problem, I would see a menu asking me to select an OS (I had Windows 7 and Windows XP installed). I cannot use any emergency measures because I need to press F12 to boot from a CD, and the keyboard is still not working. I tried removing the HD to force a boot from the CD, but it didn't work. I also tried to plug in a USB keyboard, which failed as well. Right now, I have no idea how to fix this. Any ideas? Thanks.

  Read the article

• error/message: the disk drive for /home is not ready... when connecting an external hard drive

  - by seallussus

  i am running Ubuntu 10.04 all updated installed to date (3/28/2012) and when i connect another sata HD i get this message the disk drive for /home is not ready yet or not present continue to wait, or press S to skip mounting or M for manual recovery so i press S but i get this message could not update ICEauthority file /home/username/.ICEauthority And when a press close i get this there is a problem with the configuration server (/usr/libconf2-4/gconf-sanity-check-2 exited with status 256) And when a press close i get message Nautilus could not create the following required folders :/home/username/desktop,/home/username/.Nautilus before running Nautilus, please create these folders or set permissons such that Nautilus can reach them And finally when a press Ok at the last message it disappears and i get a blank screen with a lot of colors on it and with nothing else so i shutdown (power button ) and disconnect the HD and boot without problems so how to fix this in simple commands because i am a total Linux noob notes -In the original error my username was in place of username i wrote (did not want to confuse anybody ) -I tried searching for this problem but a got a lot of different answers and most of them were really complicated to me and not working -I got a data HD connected and working without problems also the HD i installed Ubuntu on is Sata (maybe it helps) -Apologize for me bad English its not my mother language

  Read the article

• 11/28 Thought Leaders Webinar: Marketing Strategies for Great Customer Experiences

  - by Charles Knapp

  With the growing use of mobile and social, it's tempting to bolt on these new channels to existing processes. However, that piecemeal approach may not lead to satisfying customer experiences or solid returns on investments. Furthermore, the volume of information businesses have access to is growing exponentially. Is this leading to better business insight and customer experiences? Join the Internet Marketing Association, The University of California at Irvine, and Oracle as we discuss marketing strategies that will help your customers have better experiences with your brand. You'll learn effective strategies for harnessing the power of "big data" to know more and understand your customers better, empowering customers and employees to make every interaction easy and rewarding, and adapting the customer experience to connect and engage effectively with each customer. Our speakers are Melissa Boxer, Vice President of Product Strategy, Oracle Cloud and CX Applications, who is a conference keynote speaker on integrated social marketing and loyalty analytics, and Dean Abbott, CEO of Abbott Analytics, who is a thought leader in commercial predictive analytics. This learning opportunity takes place on Wednesday, November 28, 11 am to 12 pm Pacific. Register today to learn from these thought leaders.

  Read the article

• Do i need to restore iptable rules everytime on boot?

  - by capdragon

  Every time i reboot i loose the iptables rules that took me sooo long to enter. I know i can save them and restore them on boot but is there anyway to save them forever? Do i really need to restore them on boot every time? Seriously? The problem is I have a HUGE list of IPs in which i use a while loop to load them in. This can take upwards of 10 minutes. This is my home FTP server. It's a small vm with 1gb ram and very little processing power. There are so many IPs because I've pretty much given up on the Asian continent. I don't need them to be hitting up my ftp server everyday with brute force. I also block gov. monitors, trackers and spammers. This is the while loop i use to load in the list. grep INPUT block.list | while read LISTA; do sudo iptables -A $LISTA; done

  Read the article

• Efficient algorithm for Virtual Machine(VM) Consolidation in Cloud

  - by devansh dalal

  PROBLEM: We have N physical machines(PMs) each with ram Ri, cpu Ci and a set of currently scheduled VMs each with ram requirement ri and ci respectively Moving(Migrating) any VM from one PM to other has a cost associated which depends on its ram ri. A PM with no VMs is shut down to save power. Our target is to minimize the weighted sum of (N,migration cost) by migrating some VMs i.e. minimize the number of working PMs as well as not to degrade the service level due to excessive migrations. My Approach: Brute Force approach is choosing the minimum loaded PM and try to fit its VMs to other PMs by First Fit Decreasing algorithm or we can select the victim PMs and target PMs based on their loading level and shut down victims if possible by moving their VMs to targets. I tried this Greedy approach on the Data of Baadal(IIT-D cloud) but It isn't giving promising results. I have also tried to study the Ant colony optimization for dynamic VM consolidating but was unable to understand very much. I used the links. http://dumas.ccsd.cnrs.fr/docs/00/72/52/15/PDF/Esnault.pdf http://hal.archives-ouvertes.fr/docs/00/72/38/56/PDF/RR-8032.pdf Would anyone please clarify the solution or suggest any new approach/resources for better performance. I am basically searching for the algorithms not the physical optimizations and I also know that many commercial organizations have provided these solution but I just wanted to know more the underlying algorithms. Thanks in advance.

  Read the article

< Previous Page | 179 180 181 182 183 184 185 186 187 188 189 190  | Next Page >