Search Results

Search found 17610 results on 705 pages for 'virtual console'.

Page 185/705 | < Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >

• Is It Possible To Recover A Partial LVM Logical Volume?

  - by Terry Wang

  Background It is an Ubuntu 12.04 VirtualBox VM with 5 virtual HDDs (VDI), NOTE this is just a test VM, so not well planned ahead: ubuntu.vdi for / (/dev/mapper/ubuntu-root AKA /dev/ubuntu/root) and /home (/dev/mapper/ubuntu-home) weblogic.vdi - /dev/sdb (mounted on /bea for weblogic and other stuff) btrfs1.vdi - /dev/sdc (part of btrfs -m raid1 -d raid1 configuration) btrfs2.vdi - /dev/sdd (part of btrfs -m raid1 -d raid1 configuration) more.vdi - /dev/sde (added this virtual HDD because / ran out of inodes and it wasn't easy to figure out what to delete so as to free up inodes, so I just added the new virtual HDD, created PV, added it to existing volume group ubuntu, grew the root logical volume to work around the inode issue -_-) What happened? Last Friday, before finishing up I wanted to free up some disk space on that box, for some reason I thought the more.vdi was useless and tried to detach it from the VM, I then clicked delete (should have clicked keep files damn!) by mistake when detaching. Unfortunately I didn't have backup for it. All too late. What I have tried Tried to undelete (use testdisk and photorec) the vdi files but it takes too long and recovered heaps of .vdi files that I didn't want (huge, filled the disk, damn!). I finally gave up. Fortunately most of data is on separate ext4 partition and btrfs volumes. Out of curiosity, I still tried to mount the logical volumes and see if it is possible to at least recover the /var and /etc I tried to use system rescue cd to boot and activate the volume groups, I got: Couldn't find device with uuid xxxx. Refusing activation of the partial LV root. Use --partial to override. 1 logical volume(s) in volume group "ubuntu" now active. I was able to mount home LV but not root LV. I am wondering if it is possible to access the root LV any more. Under the bonnet, data (on LV root - /) was striped to more.vdi (PV), I know it's almost impossible to to recover. But I am still curious about how system administrator/DevOps guys deal with this sort of situation;-) Thanks in advance.

  Read the article

• First Step Towards Rapid Enterprise Application Deployment

  - by Antoinette O'Sullivan

  Take Oracle VM Server for x86 training as a first step towards deploying enterprise applications rapidly. You have a choice between the following instructor-led training: Oracle VM with Oracle VM Server for x86 1-day Seminar. Take this course from your own desk on one of the 300 events on the schedule. This seminar tells you how to build a virtualization platform using the Oracle VM Manager and Oracle VM Server for x86 and to sustain the deployment of highly configurable, inter-connected virtual machines. Oracle VM Administration: Oracle VM Server for x86 3-day hands on course. This course teaches you how to build a virtualization platform using the Oracle VM Manager and Oracle VM Server for x86. You learn how deploy and manage highly configurable, inter-connected virtual machines. The course teaches you how to install and configure Oracle VM Server for x86 as well as details of network and storage configuration, pool and repository creation, and virtual machine management.Take this course from your own desk on one of the 450 events on the schedule. You can also take this course in an Oracle classroom on one of the following events:  Location  Date  Delivery Language  Istanbul, Turkey  12 November 2012  Turkish  Wellington, New Zealand  10 Dec 2012  English  Roseveille, United States  19 November 2012  English  Warsaw, Poland  17 October 2012  Polish  Paris, France  17 October 2012  French  Paris, France  21 November 2012  French  Dusseldorfm Germany  5 November 2012  German For more information on Oracle's Virtualization courses see http://oracle.com/education/vm

  Read the article

• Code Trivia #4

  - by João Angelo

  Got the inspiration for this one in a recent stackoverflow question. What should the following code output and why? class Program { class Author { public string FirstName { get; set; } public string LastName { get; set; } public override string ToString() { return LastName + ", " + FirstName; } } static void Main() { Author[] authors = new[] { new Author { FirstName = "John", LastName = "Doe" }, new Author { FirstName = "Jane", LastName="Doe" } }; var line1 = String.Format("Authors: {0} and {1}", authors); Console.WriteLine(line1); string[] serial = new string[] { "AG27H", "6GHW9" }; var line2 = String.Format("Serial: {0}-{1}", serial); Console.WriteLine(line2); int[] version = new int[] { 1, 0 }; var line3 = String.Format("Version: {0}.{1}", version); Console.WriteLine(line3); } } Update: The code will print the first two lines // Authors: Doe, John and Doe, Jane // Serial: AG27H-6GHW9 and then throw an exception on the third call to String.Format because array covariance is not supported in value types. Given this the third call of String.Format will not resolve to String.Format(string, params object[]), like the previous two, but to String.Format(string, object) which fails to provide the second argument for the specified format and will then cause the exception.

  Read the article

• Undeploying Apps Running JDev 11g WLS

  - by Christian David Straub

  Guest post from Jeanne Waldman:I was running my application in JDeveloper when I noticed log messages in the console for a different application, let's call it OldApp. I stopped and started the my application server, the WLS server, re-ran my application, and still I'd see messages for OldApp. I shut down JDeveloper, restarted, and still when I ran my application, I'd see the OldApp's messages   Well, it turns out that at some point in time the OldApp was not properly undeployed. To really stop OldApp, I had to:   Go to http://127.0.0.1:7101/console.   This deployed the console app where you configure WLS. By default the login credentials are:   username: weblogic password: weblogic1 I clicked on Deployments and I saw that OldApp was still running. I selected the checkbox next to OldApp and clicked on the Stop -> Force Stop Now.  Now when I run my application, I do not see the OldApp log messages.

  Read the article

• Keyboard / keymap problems with Xubuntu 12.04 + NX nomachine

  - by bajafresh4life

  I'm running NX client on my Macbook Pro to connect to a Xubuntu 12.04 desktop at work. I have configured NX client to start up a console upon connection. I am able to connect to my remote linux machine and I get a simple xterm console. However, when I run xfce4-session, half my keys no longer work. For example, when I launch a terminal, I typing a, s, or d works, but if type w, e, r, or t, the cursor just blinks. If I ctrl-C out of xfce4-session, all the keys work fine in my xterm console. If I run xev, this is the output for when I hit a key that works: KeyRelease event, serial 34, synthetic NO, window 0x2e00001, root 0x373, subw 0x0, time 170160781, (-45,-21), root:(824,429), state 0x4, keycode 16 (keysym 0x63, c), same_screen YES, XLookupString gives 1 bytes: (03) "" XFilterEvent returns: False KeyRelease event, serial 34, synthetic NO, window 0x2e00001, root 0x373, subw 0x0, time 170160781, (-45,-21), root:(824,429), state 0x4, keycode 67 (keysym 0xffe3, Control_L), same_screen YES, XKeysymToKeycode returns keycode: 63 XLookupString gives 0 bytes: XFilterEvent returns: False but when I hit a key that doesn't work: FocusOut event, serial 34, synthetic NO, window 0x2e00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 34, synthetic NO, window 0x2e00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 34, synthetic NO, window 0x0, keys: 2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Any ideas on what I can do to troubleshoot this issue? Googling around offered a few suggestions (like playing with xmodmap) but nothing seemed to work. Also, one thing worth mentioning is that I do not have any keyboard issues when remoting into a different Ubuntu 10 box via NX.

  Read the article

• JDBC Connection Pools in Glassfish

  - by Dana Singleterry

  I've been attempting to configure Glassfish 3.1.2.2 for ADF 11g and the need arose to create a jdbc connection pool to my Oracle XE 11g database. While this is really very trivial there were no samples of how to do this and documentation, while good, rarely ever provides concrete examples. After fumbling around for a few minutes searching for an example I gave up and figured it out on my own. Here are the steps for any of you that may be in need. This can be done either via the Glassfish command line tool asadmin or through the admin console. I'm doing this through the admin console. Start Glassfish and connect to the admin console with the credentials you defined at installation: http://localhost:4848 Navigate to Resources | JDBC | JDBC Connection Pools and select New. Be sure to enter Resource Type & Datasource Classname under General Settings tab. You can go with the defaults for Pool Settings etc... View Image Go to the Additional Properties tab and create username, password, and url properties with the respective values. View Image Navigate to Resources | JDBC | JDBC Resources and select New. Be sure to enter the JNDI Name and select the Pool Name for the jdbc connection pool you created previously. View Image Navigate to Configurations | server-config | JVM Settings and select the JVM Options tab. Add the values highlighted: -Doracle.jdbc.J2EE13Compliant=true is used to make sure the driver behaves in a JEE-compliant manner. View Image To integrate the JDBC driver into a GlassFish Server domain, copy the JAR files into the domain-dir/lib directory, then restart the server. The JAR file for the Oracle 11 database driver is ojdbc6dms.jar. An upcoming entry will demonstrate configuring Glassfish for Oracle ADF Applications.

  Read the article

• COM+, DTC, and 80070422

  - by Chris Miller

  One of our  "packaged" software bits that accesses my servers is going through an upgrade right now.  Apparently this software requires DTC to be installed on my SQL Server, and able to accept remote connections.  So I look up how to do that in the knowledge base: http://support.microsoft.com/?kbid=555017 And immediately hit a roadblock.  The DTC components aren't showing up in my Component Services console.  The entire console's acting weird (well, weirder than usual) and when I go into the console and click "Options" it insists on having a timeout entered, and when I enter one, close the box, and go back, the setting's gone again and I'm required to re-enter it.  Lots of weirdness, and no DTC tab.  If you open the COM+ folders, you immediately get error 80070422. After a lot of searching I was looking through the Services listing on the box (after restarting DTC for the twelfth time) and saw that "Com+ System Application" was disabled.  I set it to manual, rebooted the box (test server) and everything started working. So, if you're trying to follow those instructions and discover that the Component Services tool is acting odder than usual, make sure that service isn't disabled.

  Read the article

• Solaris 11 Resources for System Administrators

  - by rickramsey

  Have too much to worry about? Let us lighten the load. OTN's job is to filter through all the available resources and take you straight to the content that will help you do your job. For starters ... Oracle Solaris 11 Documentation Library Rock-solid instructions and background from the best tech writers in the business. Includes: Getting Started (including What's New and Release Notes) Installing and Updating (includes info about IPS) Administration Guide Security Guide Working With the Desktop Developing Applications for Solaris 11 Reference Manuals Important Information from Previous Releases Related Information Legal Notes Oracle Solaris 11 Training Oracle University offers training and certification for sysadmins at all levels. If you're familiar with Oracle Solaris 10, these courses are the best way to become familiar with Solaris 11: What's New in Oracle Solaris 11 (self-study) Transition to Solaris 11 - classroom and virtual Solaris 11 Administration - classroom and virtual Solaris 11 Advanced Administration - classroom and virtual These are the education paths for Oracle Certifications on Solaris 11: Oracle Certified Associate Oracle Certified Professional Courses for Solaris System, Network, and Security Administration - scroll to bottom of page for Solaris courses Indexes and Feeds of Our Best How-To Articles We update these indexes and feeds only after we read through the available content and select the best. These are our personal recommendations by topic, product, or audience. We'll be adding content about Oracle Solaris 11 in the coming days and weeks. Keep an eye out. All Systems Indexes Solaris 11 Collection All System Feeds OTN Systems Community Home Page Our Home Page is the same as the front page of a newspaper, but without the advertising. Latest articles, latest useful content from the community, plus links to all the other resources available on OTN. ... And If You Want to Be The First To Know After we select the best content, the first thing we do is hang out at the OTN Garage and talk about it.  Every once in a while we talk about cool cars and motorcycles, too: On Facebook On Twitter On Our Blog - Rick Ramsey Website Newsletter Facebook Twitter

  Read the article

• How do I solve VirtualBox error 0x80004005?

  - by maria

  Hi I was trying to run Windows XP under Virtual Box (host system Ubuntu 10.04) and I've got an error message saying: Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. This is terminal output: maria@maria-laptop:~$ sudo /etc/init.d/vboxdrv setup * Stopping VirtualBox kernel modules * done. * Uninstalling old VirtualBox DKMS kernel modules * done. * Trying to register the VirtualBox kernel modules using DKMS * Failed, trying without DKMS * Recompiling VirtualBox kernel modules * done. * Starting VirtualBox kernel modules * done. After that I can run XP on Virtual Box, but when I try to log into user's account, I have the message that I have to register XP (I haven't done it yet, as each time I was cliking on pop-up window suggesting registration, nothing was happening). I click that I want to register it now and appears the message about error 0x80004005, which prevents Windows to check the license for that computer (the message is in Polish, so I don't post it here...). I forgot to install DKMS first, but I've done it after. What should I do to run virtual machine? It was using it already, the problem occured only today. Thanks for any suggestion

  Read the article

• ANNOUNCEMENT: Oracle VM 3 Templates Available for Oracle Secure Global Desktop 4.62

  - by Mohan Prabhala

  Today, we are proud to announce the general availability of Oracle VM 3 templates for Oracle Secure Global Desktop version 4.62.  With Oracle VM 3 templates, anyone using Oracle VM 3 need not download, install and configure the Operating System and product(s) individually. In this case, the supported operating system (Oracle Linux 5.7) and Oracle Secure Global Dekstop 4.62 product is packaged together into a template that one can easily import and clone as a VM into Oracle VM 3. This results in a nearly instant deployment and configuration of Oracle Secure Global Desktop within Oracle VM 3.  This means drastically reducing the evaluation and deployment time for Oracle Secure Global Desktop when leveraging Oracle VM 3. Feel free to give it a try! Login into the Oracle VM section at Oracle Software Delivery Cloud  (click on 'Cloud Portal (Main)' at the top-right) and: Under Oracle VM templates - x86 64-bit, look for Oracle VM 3 Template (OVF) for Oracle Secure Global Desktop Media Pack for x86_64 (64 bit) Oracle Secure Global Desktop 4.62 template for x86_64 (64 bit) with Oracle Linux 5.7 Under Oracle VM templates – x86 32 bit, look for Oracle VM 3 Template (OVF) for Oracle Secure Global Desktop Media Pack for x86 (32 bit) Oracle Secure Global Desktop 4.62 template for x86 (32 bit) with Oracle Linux 5.7 Download any of the above templates. Once you are done, you must First import the assembly (ova) file that you downloaded from Oracle Software Delivery Cloud Next, create a virtual machine template from the assembly And finally create a virtual machine from the template. Once the virtual machine is created and starts up, be sure to configure the networking parameters (hostname, IP address, netmask, gateway etc), and optional user parameters correctly. You must also enter a root password during first boot. And that's it - the Oracle Secure Global Desktop install script will pick up the networking parameters, prompt for confirmation and complete a default installation. Once the installation is complete, you may want to refer to the Oracle Secure Global Desktop Administration Guide to learn more about Oracle Secure Global Desktop and its capabilities.

  Read the article

• Why is my Internet connection randomly dropping?

  - by Jeanno

  Ever since I have installed 12.04 (clean install not an upgrade), i have been having a drop in the Internet connection. The drop in the connection can be anything from 15 seconds to about 3 mins, and then the connection comes back. This behaviour happens while I am actively browsing the Internet, or if I wake up the computer and open Firefox (sometimes I have connection and sometimes I don't) . Please note that when the internet connection is on, it is not slow (as speedtest.net results show) In the beginning, I thought it was a problem with the driver r8169 for my RTL8111/8168B Ethernet card, so I downloaded the r8168 from Realtek website, followed the detailed instructions (blacklisted r8169, changed the file to '.bsh' ...), but still the same problem persisted. So I switched to a wireless connection, and I got the same problem with internet connection dropping randomly. Any ideas? Thanks in advance Output from 'lspci -v' Code: 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000efff Memory behind bridge: f8000000-fa0fffff Prefetchable memory behind bridge: 00000000d0000000-00000000dbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:01.1 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000d000-0000dfff Memory behind bridge: f4000000-f60fffff Prefetchable memory behind bridge: 00000000c0000000-00000000cbffffff Capabilities: [88] Subsystem: Dell Device 04a7 Capabilities: [80] Power Management version 3 Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [a0] Express Root Port (Slot+), MSI 00 Capabilities: [100] Virtual Channel Capabilities: [140] Root Complex Link Kernel driver in use: pcieport Kernel modules: shpchp 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f6108000 (64-bit, non-prefetchable) [size=16] Capabilities: [50] Power Management version 3 Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+ Kernel driver in use: mei Kernel modules: mei 00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 16 Memory at f6107000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f6100000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel Capabilities: [130] Root Complex Link Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fa400000-fa4fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.1 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=04, subordinate=04, sec-latency=0 I/O behind bridge: 0000c000-0000cfff Prefetchable memory behind bridge: 00000000dc100000-00000000dc1fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.2 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=05, subordinate=05, sec-latency=0 I/O behind bridge: 0000b000-0000bfff Memory behind bridge: fa300000-fa3fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: fa200000-fa2fffff Capabilities: [40] Express Root Port (Slot+), MSI 00 Capabilities: [80] MSI: Enable- Count=1/1 Maskable- 64bit- Capabilities: [90] Subsystem: Dell Device 04a7 Capabilities: [a0] Power Management version 2 Kernel driver in use: pcieport Kernel modules: shpchp 00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) (prog-if 20 [EHCI]) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0, IRQ 23 Memory at f6106000 (32-bit, non-prefetchable) [size=1K] Capabilities: [50] Power Management version 2 Capabilities: [58] Debug port: BAR=1 offset=00a0 Capabilities: [98] PCI Advanced Features Kernel driver in use: ehci_hcd 00:1f.0 ISA bridge: Intel Corporation P67 Express Chipset Family LPC Controller (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, medium devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0c <?> Kernel modules: iTCO_wdt 00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 05) Subsystem: Dell Device 04a7 Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 42 I/O ports at f070 [size=8] I/O ports at f060 [size=4] I/O ports at f050 [size=8] I/O ports at f040 [size=4] I/O ports at f020 [size=32] Memory at f6105000 (32-bit, non-prefetchable) [size=2K] Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Power Management version 3 Capabilities: [a8] SATA HBA v1.0 Capabilities: [b0] PCI Advanced Features Kernel driver in use: ahci 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) Subsystem: Dell Device 04a7 Flags: medium devsel, IRQ 5 Memory at f6104000 (64-bit, non-prefetchable) [size=256] I/O ports at f000 [size=32] Kernel modules: i2c-i801 01:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f8000000 (32-bit, non-prefetchable) [size=16M] Memory at d0000000 (64-bit, prefetchable) [size=128M] Memory at d8000000 (64-bit, prefetchable) [size=32M] I/O ports at e000 [size=128] Expansion ROM at fa000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 01:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at fa080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 02:00.0 VGA compatible controller: NVIDIA Corporation Device 0dc5 (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f4000000 (32-bit, non-prefetchable) [size=32M] Memory at c0000000 (64-bit, prefetchable) [size=128M] Memory at c8000000 (64-bit, prefetchable) [size=64M] I/O ports at d000 [size=128] Expansion ROM at f6000000 [disabled] [size=512K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Capabilities: [b4] Vendor Specific Information: Len=14 <?> Capabilities: [100] Virtual Channel Capabilities: [128] Power Budgeting <?> Capabilities: [600] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> Kernel driver in use: nouveau Kernel modules: nouveau, nvidiafb 02:00.1 Audio device: NVIDIA Corporation GF106 High Definition Audio Controller (rev a1) Subsystem: NVIDIA Corporation Device 085b Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at f6080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [60] Power Management version 3 Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Express Endpoint, MSI 00 Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel 03:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at fa400000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 51 I/O ports at c000 [size=256] Memory at dc104000 (64-bit, prefetchable) [size=4K] Memory at dc100000 (64-bit, prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Endpoint, MSI 01 Capabilities: [b0] MSI-X: Enable- Count=4 Masked- Capabilities: [d0] Vital Product Data Capabilities: [100] Advanced Error Reporting Capabilities: [140] Virtual Channel Capabilities: [160] Device Serial Number 03-00-00-00-68-4c-e0-00 Kernel driver in use: r8168 Kernel modules: r8168 05:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller (rev 01) (prog-if 10 [OHCI]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at fa300000 (64-bit, non-prefetchable) [size=2K] I/O ports at b000 [size=256] Capabilities: [50] Power Management version 3 Capabilities: [80] MSI: Enable- Count=1/1 Maskable+ 64bit+ Capabilities: [98] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [130] Device Serial Number 00-10-dc-ff-ff-cf-56-1a Kernel driver in use: firewire_ohci Kernel modules: firewire-ohci 06:00.0 SATA controller: JMicron Technology Corp. JMB362 SATA Controller (rev 10) (prog-if 01 [AHCI 1.0]) Subsystem: Dell Device 04a7 Flags: bus master, fast devsel, latency 0, IRQ 19 I/O ports at a040 [size=8] I/O ports at a030 [size=4] I/O ports at a020 [size=8] I/O ports at a010 [size=4] I/O ports at a000 [size=16] Memory at fa210000 (32-bit, non-prefetchable) [size=512] Capabilities: [8c] Power Management version 3 Capabilities: [50] Express Legacy Endpoint, MSI 00 Kernel driver in use: ahci Note that my wireless card is not showing, I have the Ralink 3390 card (which apparently does not show up on Ubuntu for some reason), however I am able to connect to wireless network and connect to the internet (when it is working)

  Read the article

• VirtualBox error 0x80004005

  - by maria

  Hi I was trying to run Windows XP under Virtual Box (host system Ubuntu 10.04) and I've got an error message saying: Kernel driver not installed (rc=-1908) The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Re-setup the kernel module by executing '/etc/init.d/vboxdrv setup' as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. This is terminal output: maria@maria-laptop:~$ sudo /etc/init.d/vboxdrv setup * Stopping VirtualBox kernel modules * done. * Uninstalling old VirtualBox DKMS kernel modules * done. * Trying to register the VirtualBox kernel modules using DKMS * Failed, trying without DKMS * Recompiling VirtualBox kernel modules * done. * Starting VirtualBox kernel modules * done. After that I can run XP on Virtual Box, but when I try to log into user's account, I have the message that I have to register XP (I haven't done it yet, as each time I was cliking on pop-up window suggesting registration, nothing was happening). I click that I want to register it now and appears the message about error 0x80004005, which prevents Windows to check the license for that computer (the message is in Polish, so I don't post it here...). I forgot to install DKMS first, but I've done it after. What should I do to run virtual machine? It was using it already, the problem occured only today. Thanks for any suggestion

  Read the article

• How can we protect the namespace of an object in Javascript?

  - by Eduard Florinescu

  Continuing from my previous question: Javascript simple code to understand prototype-based OOP basics Let's say we run into console this two separate objects(even if they are called child and parent there is no inheritance between them): var parent = { name: "parent", print: function(){ console.log("Hello, "+this.name); } }; var child = { name: "child", print: function(){ console.log("Hi, "+this.name); } }; parent.print() // This will print: Hello, parent child.print() // This will print: Hi, child temp =parent; parent = child; child = temp; parent.print() // This will now print: Hi, child child.print() // This will now print: Hello, parent Now suppose that parent is a library, as a HTML5 application in a browser this cannot do much harm because is practically running sandboxed, but now with the advent of the ChromeOS, FirefoxOS and other [Browser] OS they will also be linked to a native API, that would be a head out of the „sandbox”. Now if someone changes the namespace it would be harder for a code reviewer (either automated or not ) to spot an incorrect use if the namespaces changes. My question would be: Are there many ways in which the above situation can be done and what can be done to protect this namespaces? (Either in the javascript itself or by some static code analysis tool)

  Read the article

• Windows Intune, Cloud Desktop management

  - by David Nudelman

  As a part of Microsoft Cloud computing strategy, Windows Intune beta was released today. Here’s a quick overview of what customers and IT consultants can do with the cloud service component of Windows Intune: Manage PCs through web-based console: Windows Intune provides a web-based console for IT to administrate their PCs. Administrators can manage PCs from anywhere. Manage updates: Administrators can centrally manage the deployment of Microsoft updates and service packs to all PCs. Protection from malware: Windows Intune helps protect PCs from the latest threats with malware protection built on the Microsoft Malware Protection Engine that you can manage through the Web-based console. Proactively monitor PCs: Receive alerts on updates and threats so that you can proactively identify and resolve problems with your PCs—before it impacts end users and your business. Provide remote assistance: Resolve PC issues, regardless of where you or your users are located, with remote assistance. Track hardware and software inventory: Track hardware and software assets used in your business to efficiently manage your assets, licenses, and compliance. Set security policies: Centrally manage update, firewall, and malware protection policies, even on remote machines outside the corporate network. And here a quick video about Windows Intune For support and questions go to : TechNet Forums for Intune Regards, David Nudelman

  Read the article

• N64oid Brings N64 Emulation to Android Devices

  - by ETC

  Craving some Ocarina of Time adventures, Super Mario 64 antics, or some Star Fox 64 flying on your Android device? N64oid brings retro emulation of Nintendo’s popular N64 console to Android devices. N64oid is an N64 console emulator for Android devices. You’ll need a copy of the $5.99 emulator, ROMs (from the usual sources, unless you’ve got a ROM ripping setup in your basement and a stack of old cartridges), and a suitably speedy Android device. Older Android devices will find the playback choppy and subpar, but newer and speedier devices like the Nexus-One and Samsung Galaxy should have no problem handling the emulator. Like all emulators N64oid is a work in progress and emulating an entire closed-system console on a totally different set of hardware is never a perfect 1:1 emulation, but if you’re a die hard fan of classic N64 titles (check out this list of top ranked titles to inspire some nostalgia) N64oid is worth the price of a burger for sure. N64oid [Android Market via Download Squad] Latest Features How-To Geek ETC Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Have You Ever Wondered How Your Operating System Got Its Name? Should You Delete Windows 7 Service Pack Backup Files to Save Space? What Can Super Mario Teach Us About Graphics Technology? Windows 7 Service Pack 1 is Released: But Should You Install It? How To Make Hundreds of Complex Photo Edits in Seconds With Photoshop Actions Super-Charge GIMP’s Image Editing Capabilities with G’MIC [Cross-Platform] Access and Manage Your Ubuntu One Account in Chrome and Iron Mouse Over YouTube Previews YouTube Videos in Chrome Watch a Machine Get Upgraded from MS-DOS to Windows 7 [Video] Bring the Whole Ubuntu Gang Home to Your Desktop with this Mascots Wallpaper Hack Apart a Highlighter to Create UV-Reactive Flowers [Science]

  Read the article

• How to run boot loader in VMWare?

  - by Asim Haroon

  I am using Ubuntu as a virtual machine in VMWare. I have used this code to write a boot loader which would write Hello world on the screen. [BITS 16] [ORG 0x7C00] MOV SI, HelloString CALL PrintString JMP $ PrintCharacter: MOV AH, 0x0E MOV BH, 0x00 MOV BL, 0x07 INT 0x10 RET PrintString: next_character: MOV AL, [SI] INC SI OR AL, AL JZ exit_function CALL PrintCharacter JMP next_character exit_function: RET HelloString db 'Hello World', 0 TIMES 510 - ($ - $$) db 0 DW 0xAA55 I wrote this code in the text editor in Ubuntu and saved the file as Boot.asm Then I compiled the Boot.asm to boot.bin file by using this command nasm -f bin -o boot.bin Boot.asm and it didn't gave me any errors. After that I copied the boot.bin file to my usb and took it to my Windows OS. After this I burned the boot.bin file to boot.img and boot.iso files. Then I created a new virtual machine and named it booter, when it asked for the .iso file of the OS I want to run I gave it the boot.iso file, about which I told above, then I powered on that virtual machine but it gave me this error PXE-M0F: No boot filename received PXE-M0F: Exiting Intel PXE ROM Operating System not found Please tell me what is the main problem and how can I overcome that problem.

  Read the article

• How do I connect to my running VM via virsh?

  - by Avery Chan

  My VM has already been started via virsh start chameleon.ootbdev. When I do a virsh console chameleon.ootbdev I get the following output: Connected to domain chameleon.ootbdev Escape character is ^] error: internal error cannot find character device (null) Doing a google search on this led me to this "solution". Unfortunately, editing the domain via virsh edit chameleon.ootbdev doesn't seem to stick. I suspect the issue is that I'm inserting the XML incorrectly: the instructions from the link ask me to insert the following XML into the domain XML file. <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target type='serial' port='0'/> </console> I've posted my domain XML file to pastebin here. This is AFTER I've tried to insert the above XML. I inserted this XML after the </devices> block. My primary question is: How do I connect to the running VM? A secondary question would be: How do I edit the domain file with the above XML and get the changes to stick?

  Read the article

• Internet is not working in base machine

  - by surendar

  I have a Ubuntu desktop. I am running a virtual windows machine using virtual box. Few days before Internet is not working in Ubuntu but it is working in the virtual machine. Even the samba shares are also accessible. I don't know why internet is not working in the base machine. I have tried to ping google.com, but it returns Ubuntu@desktop:~$ ping google.com ping: unknown host google.com ifconfig command's output Ubuntu@desktop:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:27:0e:1b:86:2a inet addr:192.168.1.7 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::227:eff:fe1b:862a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:38221 errors:0 dropped:0 overruns:0 frame:0 TX packets:28161 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:39144616 (39.1 MB) TX bytes:6143919 (6.1 MB) Interrupt:27 Base address:0x2000 eth0:0 Link encap:Ethernet HWaddr 00:27:0e:1b:86:2a inet addr:192.168.2.7 Bcast:192.168.2.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:27 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:14944 errors:0 dropped:0 overruns:0 frame:0 TX packets:14944 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:1735451 (1.7 MB) TX bytes:1735451 (1.7 MB) vmnet1 Link encap:Ethernet HWaddr 00:50:56:c0:00:01 inet addr:192.168.243.1 Bcast:192.168.243.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:77 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) vmnet8 Link encap:Ethernet HWaddr 00:50:56:c0:00:08 inet addr:172.16.162.1 Bcast:172.16.162.255 Mask:255.255.255.0 inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:78 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)

  Read the article

• Install Adobe AIR on Ubuntu/Linux

  Since quite some time Adobe Technologies released the Linux version of Adobe AIR to bring web applications and widgets to your desktop. Installing new applications on a Linux system is not always as easy as switching the computer on. The following instructions might be helpful to install Adobe AIR on any Linux system. First of all, get the latest installer of Adobe AIR from http://get.adobe.com/air/ - as of writing this article the file name is AdobeAIRInstaller.bin. Save the download in your preferred folder. Now, there are two ways to run the installer - visual style or console style. Visual Installation Launch your favorite or standard file manager like thunar or nautilus and browse to the folder where the AdobeAIRInstaller.bin has been saved. Right click on the file and choose 'Properties' in the context menu Set 'Execute' permissions and confirm modifications with OK Rename file into AdobeAIRInstaller Double click and follow the instructions Using the console Open a terminal like xterm Change into the directory where you stored the download Run this command:[code]chmod +x AdobeAIRInstaller.bin[/code] Now run this command:[code]sudo ./AdobeAIRInstaller.bin[/code] The normal installer will open, install it. From now whenever you download a .air file, just double click it and it will be installed. Troubleshooting In case that the installation does not start properly, try to install via console. This gives you more details about the reasons. Should you run into something like this: [code]AdobeAIRInstaller.bin: 1: Syntax error: "(" unexpected[/code] Double check the execute permission of the installer file and try again.

  Read the article

• Distinct operator in Linq

  - by Jalpesh P. Vadgama

  Linq operator provides great flexibility and easy way of coding. Let’s again take one more example of distinct operator. As name suggest it will find the distinct elements from IEnumerable. Let’s take an example of array in console application and then we will again print array to see is it working or not. Below is the code for that. In this application I have integer array which contains duplicate elements and then I will apply distinct operator to this and then I will print again result of distinct operators to actually see whether its working or not. using System; using System.Collections.Generic; using System.Linq; using System.Text; namespace Experiment { class Program { static void Main(string[] args) { int[] intArray = { 1, 2, 2, 3, 3, 3, 4, 4, 4, 4, 5, 5, 5, 5, 5 }; var uniqueIntegers = intArray.Distinct(); foreach (var uInteger in uniqueIntegers) { Console.WriteLine(uInteger); } Console.ReadKey(); } } } Below is output as expected.. That’s cool..Stay tuned for more.. Happy programming. Technorati Tags: Linq,Distinct

  Read the article

• EPM 11.1.2.2 Architecture: Essbase

  - by Marc Schumacher

  Since a lot of components exist to access or administer Essbase, there are also a couple of client tools available. End users typically use the Excel Add-In or SmartView nowadays. While the Excel Add-In talks to the Essbase server directly using various ports, SmartView connects to Essbase through Provider Services using HTTP protocol. The ability to communicate using a single port is one of the major advantages from SmartView over Excel Add-In. If you consider using Excel Add-In going forward, please make sure you are aware of the Statement of Direction for this component. The Administration Services Console, Integration Services Console and Essbase Studio are clients, which are mainly used by Essbase administrators or application designers. While Integration Services and Essbase Studio are used to setup Essbase applications by loading metadata or simply for data loads, Administration Services are utilized for all kind of Essbase administration. All clients are using only one or two ports to talk to their server counterparts, which makes them work through firewalls easily. Although clients for Provider Services (SmartView) and Administration Services (Administration Services Console) are only using a single port to communicate to their backend services, the backend services itself need the Essbase configured port range to talk to the Essbase server. Any communication to repository databases is done using JDBC connections. Essbase Studio and Integration Services are using different technologies to talk to the Essbase server, Integration Services uses CAPI, Essbase Studio uses JAPI. However, both are using the configured port range on the Essbase server to talk to Essbase. Connections to data sources are either based on ODBC (Integration Service, Essbase) or JDBC (Essbase Studio). As for all other components discussed previously, when setting up firewall rules, be aware of the fact that all services may need to talk to the external authentication sources, this is not only needed for Shared Services.

  Read the article

• Tuning B2B Server Engine Threads in SOA Suite 11g

  - by Shub Lahiri, A-Team

  Background B2B 11g has a number of parameters that can be tweaked to tune the engine for handling high volumes of messages. These parameters are also known as B2B server properties and managed via the EM console.  This note highlights one aspect of the tuning exercise and describes the different threads, that can be configured to tune the performance of a B2B server. Symptoms The most common indicator of a B2B engine in need of a tuning is reflected in the constant build-up of messages in an internal JMS queue within the B2B server. It is called B2B_EVENT_QUEUE and can be monitored via the Weblogic server console. Whenever such a behaviour is seen, it usually results in general degradation of performance. Remedy There could be many contributing factors behind a B2B server's degradation of performance. However, one of the first places to tune the server from the out-of-the-box, default configuration is to change the number of internal engine threads allocated within the B2B server. Usually the default configuration for the B2B server engine threads is not suitable for high-volume of messaging loads. So, it is necessary to increase the counts for 3 types of such threads, by specifying the appropriate B2B server properties via the EM console, namely, Inbound - b2b.inboundThreadCount Outbound - b2b.outboundThreadCount Default - b2b.defaultThreadCount The function of these threads are fairly self-explanatory. In other words, the inbound threads process the inbound messages that are coming into the B2B server from an external endpoint. Similarly, the outbound threads processes the messages that are sent out from the B2B server. The default threads are responsible for certain B2B server-specific special tasks. In case the inbound and outbound thread counts are not specified, the default thread count also dictates the total number of inbound and outbound threads. As found in any tuning exercise, the optimisation of these threads is usually reached via an iterative process. The best working combination of the thread counts are directly related to the system infrastructure, traffic load and several other environmental factors.

  Read the article

• How to implement fast search on Azure Blob?

  - by Vicky

  I am done with writing the code to upload files (text files) to azure blob storage. Now I want to provide search based on text files content. For ex. If I search for "Hello" then the name of files that contains "Hello" words should appear in search result. Here my code to search class BlobSearch { static void Main(string[] args) { string searchText = "Hello"; CloudStorageAccount account = CloudStorageAccount.Parse(azureConString); CloudBlobClient blobClient = account.CreateCloudBlobClient(); CloudBlobContainer blobContainer = blobClient.GetContainerReference("MyBlobContainer"); blobContainer.FetchAttributes(); var blobItemList = blobContainer.ListBlobs(); foreach (var item in blobItemList) { string line = string.Empty; CloudBlockBlob blockBlob = blobContainer.GetBlockBlobReference(item.Uri.ToString()); if(blockBlob.Name.Contains(".txt")) { int lineno = 1; using (var stream = blockBlob.OpenRead()) { using (StreamReader reader = new StreamReader(stream)) { while ((line = reader.ReadLine()) != null) { if (line.IndexOf(searchText) != -1) { Console.WriteLine("Line : " + lineno +" => "+ blockBlob.Name); } lineno++; } } } } } Console.WriteLine("SEARCH COMPLETE"); Console.ReadLine(); } } Above code is working but it is too slow. Is there any way to do it faster or Can improve above code.

  Read the article

• Using Apache2 to set up a basic webpage

  - by mrhatter

  I am having a problem with a test page I set up for my website. The config file (index.html) looks like this <html> <head> <title>Welcome to website.net!</title> </head> <body> <h1>Success! The website.net virtual host is working!</h1> </body> </html> Which should display a page like this in my browser when I navigate to www.mywebsite.net Welcome to website.net! Success! The website.net virtual host is working! However I get a 403 "forbidden" error when I navigate to the page. What am I missing? I have the directory installed on /var/www/mywebsite.net/public_html/index.html I have the permissions of the /var/www directory set to 755 so that others can read and exicute it but it does not seem to be working. I also have port 80 open on my iptable. The server is a VPS server if that makes a difference however I have added a DNS record for the ip address. Any help is appreciated! UPDATE: Here is my virtual host configuration file "mywebsite.net.conf" <VirtualHost *:80> # Admin email, Server Name (domain name), and any aliases ServerAdmin [email protected] ServerName www.mywebsite.net ServerAlias mywebsite.net # Index file and Document Root (where the public files are located) DirectoryIndex index.html index.php DocumentRoot /home/myusername/public/mywebsite.net/public # Log file locations LogLevel warn ErrorLog /home/mysuername/public/mywebsite.net/log/error.log CustomLog /home/myusername/public/mywebsite.net/log/access.log combined <Directory /home/myusername/public/mywebsite.net/public> Options Indexes ExecCGI Includes FollowSymLinks MultiViews AllowOverride All Order Deny,Allow Allow from all </Directory> </VirtualHost>

  Read the article

• cygwin GNU make .net program piping inconsistent behavior

  - by Codism

  This question may sound like a superuser question but I feel there is something related to programming. Anyway, my computer had a fresh installation of Win 7 64 and cygwin recently. Now I observed some problem with pipe handling in gnu make file. The following is the Makefile I use to reproduce the issue: all: fsutil | cat my-dotnet-console.exe | cat The problem is: for the first command line, the piping works every time but for the second command line, the piping barely works - I got no result for the second command for most cases, regardless of the environment (cmd or bash) in which the make file is invoked. However, if I copy paste the second command line into cmd (or bash), the pipe works every time. The following is my .net program: static void Main(string[] args) { Console.WriteLine(new string('a', 40)); Console.Out.Flush(); } The make version is 3.82.90 but the same problem was observed in a previous version (because of the windows path handling problem in 3.82.9, I replaced make.exe with a previous version). I don't know the exact cygwin version I have installed but the current version on cygwin.com is 1.7.11-1. Currently, my work around is to redirect the output to a temporary file but it would be great if I can avoid the temporary file. Thanks

  Read the article

< Previous Page | 181 182 183 184 185 186 187 188 189 190 191 192  | Next Page >