Search Results

Search found 6770 results on 271 pages for 'azure storage'.

Page 187/271 | < Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >

• Oracle RAC interconnect in a Dell M1000e Blade Enclosure

  - by Antitribu

  We are looking at a Dell M1000e enclosure and appropriate Blades with 4 NICs each. We are planning on running Linux/Oracle 11g RAC on two blades, storage will be handled on an iSCSI SAN for which two NICs (via passthrough) will be connected leaving us with two NICs (via blade centre switches). We would like to have an interconnect (obviously) , an external IP and an internal IP. Would best practice be to: bond the remaining two interfaces and VLAN as appropriate to provide three virtual interfaces? run the interconnect on one interface and VLAN the external/internal interfaces? purchase a blade with more NICs as the above is a terrible idea? Another option? Please feel free to point out the blindingly obvious or to relevant documentation on support.oracle. I am specifically interested in supported configurations and best practices. Thanks!

  Read the article

• Can one build a single disk RAID 1 array?

  - by Core Xii

  I have an Nvidia hardware RAID 1 array and need to reformat. But I don't have any spare storage media, so I need to get along with the 2 disks in the array. I figured I'd do as follows: Delete the array, so I have 2 separate but identical disks, A and B, with my files Put disk B aside Reformat disk A, build RAID 1 array with it, install Windows XP Put disk B back in Boot to Windows on disk A, copy my files from disk B to disk A Add disk B to the RAID 1 array, rebuild array And now I'd have a new RAID 1 array, fresh install and all my files intact (the ones I copied). Here are the parts I'm unsure about: Can I build a RAID 1 array using just one disk, then add the other one later? Can Windows on disk A see disk B and allow me to copy my files over?

  Read the article

• Is it possible create a 4TB bootable partition in the x86 edition of Windows Server 2003 Enterprise?

  - by Giffyguy

  I'd like to find out if there is any way to accomplish this, since it would benifit my storage server greatly. I am using a Promise FastTrak 8660 and five Seagate ST31000340NS 1TB drives in a RAID 5 array. I figure that if the x86 ENTERPRISE edition of Server 2003 can handle 64GB of RAM, it should have no problem supporting larger HDD volumes as well. I've read (somewhere...) that the Windows Server operating systems are not limited to the standard 2TB like Windows XP and 2000 are. I'm hoping it's something that just needs to be turned on, similar to the way PAE works for the 4GB RAM limit in x86 servers.

  Read the article

• FreeNAS - how to "Exclude from file" in Rsyncd (GUI)

  - by user179181

  I am trying to set rsync tasks to Pull user profiles from 11 Windows machines running DeltaCopy Server and then configure ZFS periodic snapshot tasks for a backup solution. So far this has been working fine, although i would like to exclude certain file types like .DAT or NTUSER.DAT. My Exclusion file resides on the local ZFS Dataset (Receiving side) and is as follows: Temp Temporary Internet Files NTUSER.DAT NTUSER.DAT.LOG *.dat *.tmp *.DAT.log *.ost *.pst The command i typed under Auxiliary Parameters (Rsyncd Global Conf under services)is as follows: exclude from = /mnt/Storage/User_Profiles/exclude.txt Ive tried deleting the .DAT files from the receiving end and just as i start to get excited i click refresh and there they are again

  Read the article

• Xen private networking between multiple hosts

  - by Joe

  I have two physical hosts running Xen 3.2, sharing storage via iSCSI. On these two hosts are a number of domUs and I'd like to network them in multiple private networks so they can only contact other domUs on their private network. My understanding of the xen documentation suggests it's possible to do this within one dom0 (ie create virtual networks between domUs), but I've found nothing explaining how this can be implemented across multiple dom0s on different hosts. The only thing that jumps to mind is manually creating iptable rules to route data to the other host, but this seems to lack elegance and could quickly grow cumbersome. Any suggestions? All advice is much appreciated!

  Read the article

• which server is best for me??

  - by mathew

  I am looking for a best hosting service for my website. My website is a PHP MySQl driven site which hase got site scrapping for more than 10 websites and near about 8-10 API pursing and some about 150 mb dat file reading(from local hard drive), and also one rss pursing,Live graph from other sites, geo map from Google,Map api from Google and so on. one widget which real-time result for any one who chose the same. so my question is which is best option for me. actually I am considering softlayer cloud as they are pretty cheap and more facilities than rackspace. another option is a dedicated server which has 2 single core processor, 4GB ram and 250GB sata II. with 100 mbps uplink. so please tell me which will be the best option?? I heard that dedicated server has lots of limitations than cloud. but for cloud they uses SAN for storage so I am afraid the reading proces for database may be bit slower...and their basic plan ram is only 1 GB.

  Read the article

• Create and use intermediate certificate authority on Windows Server 2012?

  - by Sid

  Background: Server OS is Windows Server 2012. GUI is installed as we come upto speed with powershell. Setup is staging, not production (yet). We have our (internal, domain limited) Root CA installed. I would like to take the Root CA offline to secure storage but before that I'd like to setup an intermediate CA which can take over actual live, online (int-RA-net) functionality Can someone guide me covering: creating the intermediate CA certificate request installing the intermediate CA certificate on domain controller (certification authority role already installed with Root CA online right now) use the intermediate CA to generate a certificate (any use certificate, just for demonstration purposes) Obviously this certification chain would be invalid on computers outside our domain (self trusted root - our root certificate is NOT from common 3rd parties). This last point is NOT a problem.

  Read the article

• Best "Keep your music with you" setup

  - by solomongaby

  I really enjoy listening to music, and because of this i have a lot of sources for it. This is not always a good thing since i have my music stored on a lot of devices ( home computer, work computer, online storage, ipod ) and sometimes its a bit difficult to have the same music in all places. Sometimes i dont have the same songs in all the places, i make a playlist in one place and want it in the other place etc. How do you keep your music in sync on all your devices. PS: i use both windows and linux.

  Read the article

• upgrading my computer system for office use

  - by denise ellul

  Presently I have the under-mentioned computer system. What should be changed and upgraded with the following products that I own presently? I am interested in performance issues related to cache memory, bus speed, RAM, CAS latency as well as other considerations. Thanks for your help. Processor (CPU): Intel Celeron Dual Core E3300 2.5 GHz Motherboard: Asus P5QPL-AM G41 Main Memory (RAM): 2 GB Team Elite DDR2 PC8000 Case: Coolermaster RC330 Power Supply Unit: 500W EZ-Cool Standard Storage Device (Hard Drive): 500GB Samsung Video Card: Intel GMA X4500 (On-board) Optical Drive: LG GH22NS50 Sound Card: AC 97 (On – board) Card Reader: Akasa Black TFT Monitor: 19” View Sonic Speakers: Logitech S120 2.0

  Read the article

• Best motherboard power supply combo for backblaze server

  - by jin14

  Building a backblaze server as described in this article. http://blog.backblaze.com/ So 45 hard drives in one box. I'm making it a MSDPM 2010 server so I actually don't even need raid cards in there as MSDPM will figure out how to use all of the hard drives on it's own. So need to know what motherboard, CPU, power supply I should get. Primary hard drive : SSD 128GB Storage : 45 1.5GB sata drives OS : windows 2008 Backup software : Microsoft System center Data protection server 2010 Need to know Which mother board to buy which will support 45 SATA hard drives. Don't need a raid card. Which power supply can power all 45 hard drives, 1 ssd drive, motherboard. Best set of equipment that meets my needs wins

  Read the article

• Best way to replicate servers

  - by Matthew

  I currently have two servers both with linux software RAID1 configurations. They use heartbeat and DRBD to create a shared DRBD device that hosts a a exported NFS directory. The servers run Ubuntu Server with a LXDE GUI and some IP These servers are going to be placed on fishing vessels to act has redundant storage for IP cameras. My boss wants me to figure out the most efficient way to create these servers. We might be looking at pushing out several systems a week. Each configuration will be almost identical besides IP addressing. What would be the best method to automate the configuration process? We are trying to cut down on labor costs to set these up. Imaging and Proceeding are both on my mind right now

  Read the article

• Virtualization deployment for datacenter

  - by bogha

  Hi, my company is going to deploy an IT Infrastructure on a virtual platform, can you please help me with the following: 1- which one do you recommend, Cisco Unified computing system ( cisco + emc + vmware )or HP Blades( virtualization solution + HP Storage )? 2- i Need to install a DNS Server, Web server, cpanel for managing hosting packages and Microsoft layer of product for usingg in the corporate infrastructur ( active directory, Local DNS, Exchange server, DHCP, Global catalog ) what is the minimum requirments for these servers ( in terms of CPU and Memory ) . 3- what is the best way to implement a redundant solution in a virtual environment. thank you

  Read the article

• Laptop stopped recognizing USB hard drive

  - by vahokif

  Hi, My Packard Bell EasyNote TX86 laptop stopped recognizing my 1 TB Toshiba Store Art hard drive. It worked fine until now, and it still works on other computers. Other USB devices (including storage) work, and I've tried plugging it in every port, to no avail. When I plug it in it spins up, but Windows doesn't react at all (it's not in disk management), Linux doesn't write anything in dmesg and I can't see it in BIOS setup. I didn't use it at all today, apart from plugging it into a freshly-installed Windows 7 machine once (where it worked). What can I do? Which device is to blame here? EDIT: One more thing. I unplugged the drive while the laptop was hibernated. Google says this might be the problem and it might have something to do with resetting the USB Host Controller.

  Read the article

• VPS for Glassfish

  - by Harry Pham

  Our small startup company plan to deploy a web application on Glassfish, I and wonder if some of the experience user out there can answer me couple question. When I shopping for server, I usually look at RAM amount, as GF does required good amount of RAM to run, below are the two sites with significant price different for the same amount of RAM. I wonder why?? Godaddy: http://www.godaddy.com/hosting/virtual-dedicated-servers.aspx?ci=9013 Versus http://entic.net/Servers Does below plan from Godaddy consider good to run GF application. OS: Linux CentOS • RAM: 4 GB • Storage: 60 GB • Bandwidth: 2,000 GB/mo Our web application is a social network, expected to have 2000-4000 users to start with

  Read the article

• SQL 2008 R2: Data\Log partions

  - by Reese Hirth

  I have a SQL Server setup that a previous IT person set up with a 2TB data partition and a 1TB log partition. The OS partition is 244GB and SQL is installed on a separate 1TB partition. We have an additional 8TB of storage that I would like the new IT staff to bring on line. He wants to create 4 new 2TB data partition. I see this as confusing. Can't we just backup the current data partition, blow it away, and create a new 10TB data partition I'm responsible for administering the data on the server but am not allowed to do the setup myself. This is a GIS server running ArcGIS Server with around 60 geodatabases ranging from 20BG to a couple that may grow to over a TB. So, 5-2TB data partitions or 1-10TB partition. Thanks for the advice.

  Read the article

• Parity Initialization after putting in two new disks

  - by lbanz

  All my firmware is up to date on the server and the controllers. Storage crashed over the weekend. I rebooted it and it detected that I put in two new disks last week (I did check that both disk completed the rebuilding process last week). After it booted into the OS I see that it gave me an information message. After 18 hours it is at 54% so it is looking healthy. But I need to replace 5 more disk in the msa. Should I wait for this message to finish before replacing more disks? 785 Background parity initialization is currently queued or in progress on Logical Drive 1 (15.0 TB, RAID 5). If background parity initialization is queued, it will start when I/O is performed on the drive. When background parity initialization completes, the performance of the logical drive will improve.

  Read the article

• Network adapters reliability

  - by casey_miller

  Can you help me with understanding of reliability of network adapters. Most of the time servers do have at least 2 NIC's bonded to provide sort of a HA for it. So in case of one NIC fails, the second would still do the job. I wonder which factors work when you use network adapters. I know that, the most important and weakest part of any computer system is: storage (i.e HDD). but how reliable actually network adapters are? There are more expensive ones, and cheaper adapters. In which cases do they actually fail? In what circumstances. May it be a intensive usage of them Time when it's on In your experience how often you found yourself changing NIC's due to their fail? Or just what's the typical lifetime of commodity NIC's? thanks.

  Read the article

• Suggestions for a SOHO/Home Asterisk system

  - by James

  I would like to buy a small embedded system that runs Linux and Asterisk. I would like two FXS ports ( to plug analogue phones into ) and one FXO port ( to plug in to my real line to allow access to the POTS ). I would like it to have a USB port to hold storage for voicemail. I really want it for home use so I would like it to be under £150 ( say $250 ), given that you can buy ADSL routers for around this much can any of them be made to run Linux and Asterisk? I don't want a PC as the power usage would be too high. I am looking for something like this ASDL router but open and able to run Asterisk or another open PBX. At worst I would like a box which had one FXO and two FXS and just made them completely available over IP to a full Asterisk system on a low power Atom system.

  Read the article

• System has reached the maximum size allowed for the system part of the registry

  - by Bob Denny

  To be precise System has reached the maximum size allowed for the system part of the registry. Additional storage requests will be ignored. WinXP/64 running fine for 2 years (no /3Gb switch), just started happening. I used ntregopt and the problem went away at least temporarily. However, looking before and after in Windows\System32\Config I see that my System file was reduced only by 10% and is still 170+ Mb. According to my rather extensive research with Google, this is "huge" and should be more like 10-20Mb. The system runs fine. There is a System.bak that is only 11Mb and has the date when I ran ntregopt. That's what I know. Now my question: Is there anything I can do to reduce or rebuild the System registry hive given the above info?

  Read the article

• What are some good methods to improve personal password management?

  - by danilo

  I want to improve my personal password management. I usually use secure passwords, but overuse them for too many different places. My questions: What methods do you use to create passwords, e.g. for different online sites/logins? What methods do you use to remember those passwords? Memory? Pen&Paper? Software storage? Is there some good way to store my passwords somewhere, so I can always have access to them when I need them (e.g. a webbased solution on my own server) but at the same way keep them away from unwanted access? Edit: Someone on another site mentioned http://passwordmaker.org/. Have you had any good or bad experiences with that software?

  Read the article

• How to Disable secondary drive from booting upon restart - Windows

  - by DevCompany

  I had a Windows 2003 Hard Drive on my server and it went bad so I installed a new clean hard drive and installed Windows 2008 R2 on the new clean drive. I moved the old 2003 drive to be used only for general storage on the same computer. It usually boots into Windows 2008 upon a restart, but just sometimes it starts trying to boot the old 2003 drive and causes boot issues(NTDLR Bootloader, and other errors), even though the order of boot preference is set to boot 2008, and NOT 2003. I need to know how to remove any old code that keeps this old drive as a bootable drive. I still want to use it as a secondary drive just dont want to have any boot code on it. hopefully my situation is clear for everyone to get a good response. Thank you...

  Read the article

• Choosing Truecrypt volume names and keyfile names

  - by Howiecamp

  Any recommendations on what to name Truecrypt volumes (container files) and where to locate them? Certainly a name like "this is a truecrypt volume.tc" isn't a good idea. Any recommended storage locations? Same question for keyfiles that are generated with Truecrypt. Finally, lets say you choose an existing file, ymca.mp3, as your keyfile. Given that that file is innocuous and normal looking, isn't it easy to forget that's your key file so when you get sick of the Village People and delete the song you're hosed?

  Read the article

• glusterfs to replicate files to other servers

  - by sbrattla

  I've got multiple servers which all need to have the same content in /home. In other words, if the file /home/user1/test.txt is updated on server A, this needs to be replicated to all other servers in the cluster. Is it possible to use GlusterFS for this purpose? That is, let each server have a full copy of all data locally - which that server will be working on - and solely use GlusterFS to take care of replicating this data to the other servers? I'm not intersted in a combined storage, but rather have all data on all machines only to have GlusterFS to replicate it to the other machines.

  Read the article

• Routing traffic to specific web sites through Ethernet, rest via wifi on Mac OS X 10.6?

  - by user32448

  Hi I have two separate Internet connections connected to a Mac and I'd like one of them (via Ethernet eth0 gateway 192.168.2.1) to serve for just backing up to an remote online storage, and the other one (via Airport en1 gateway 192.168.1.1) for all other Internet traffic. I tried using "route" from the terminal as follows: sudo route add -host 98.207.226.113 -interface eth0 (just for testing against the site www.whatismyip.org whose IP is 98.207.226.113, to see through which gateway the traffic is routed) I can see using netstat that the route is added: $ netstat -rn -f inet Routing tables Internet: Destination Gateway Flags Refs Use Netif Expire default 192.168.1.1 UGSc 49 0 en1 98.207.226.113 192.168.2.1 UGSc 0 0 eth0 However, the traffic in this case does NOT get routed properly through Ethernet, as if the routing definition I made is ignored. Any ideas? Thanks!

  Read the article

• Can someone correct me about Windows 2008 DFS implementation

  - by cwheeler33

  I have 2 two Windows 2003 file servers using DoubleTake at the moment. They are in an 2003 AD domain. And each server has it's own disk set. It is time to replace the servers... I want to use Windows 2008 64bit Ent. I was thinking of using DFS-R to replace DoubleTake. The part I'm not sure about is clustering. Do I need to have shared storage if each server has a copy of the data? I want to have the data available to the same share name, so maybe I don't fully understand how DFS is set up. I currently have about 6TB of data. I expect to grow by 3TB a year on these file servers. Any resources/books that could teach me would be good to know as well.

  Read the article

< Previous Page | 183 184 185 186 187 188 189 190 191 192 193 194  | Next Page >