Search Results

Search found 12824 results on 513 pages for 'glen little'.

Page 188/513 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

• What virtualization solution should I try next, after hitting problems w/ VMWare Player in dual-netw

  - by Alex R

  I have been using VMWare Player 2.5 for a while (Ubuntu guest on Vista host, 32-bit). VMWare had worked great until now but then I hit a brick wall: Due to some reorganization of my home network, the host machine now has to use a wireless connection to reach the Internet, while the printer, fileserver, and other important stuff are attached to a local gigabit hub. I have tried several tricks, such as editing the .vmx file, changing settings in vmnetcfg, etc, but I'm still unable to get the virtual Ubuntu box to connect each of the two virtual NICs to different networks (I did get it to recognize two NICs, but both DHCP'd onto the gigabit LAN). So, I'm ready to dump vmware for something with a little more low-level control of network settings. Virtualization is such a crowded space, I could spend months evaluating every product out there. I'm hoping for a shortcut... Can anyone recommend the best VM for my situation described above? Thanks

  Read the article

• What's the strengths and weaknesses of existing configuration management systems?

  - by Daniel C. Sobral

  I was looking up here for some comparisons between CFEngine, Puppet, Chef, bcfg2, AutomateIt and whatever other configuration management systems might be out there, and was very surprised I could find very little here on Server Fault. For instance, I only knew of the first three links above -- the other two I found on a related google search. So, I'm not interested in what people think is the best one, or which they like. I'd like to know the following: Configuration Management System's name. Why it was created (as opposed to using an existing solution). Relative strengths. Relative weaknesses. License. Link to project and examples.

  Read the article

• RS-232 vs. RS-485

  - by user60524

  Doing a little research on the two to figure out which one may better suit my purposes (communications amongst different hardware). How do they fare against one another? Im far from being a specialist and have no idea where I would even start looking for data to compare and contrast. If possible can someone please answer the following questions in regards to each of these. Can they be networked amongst each other? Can they be easily networked over ethernet? What speeds do they transfer at? (Min, Max, Etc.) Reliability? Best framework to build on top of to support the above? Any standard communications programs? Debugging capability? Any help would be very much appreciated, thanks.

  Read the article

• Proper way to partition filesystem with Xen

  - by luckytaxi

  I'm coming from a vmware environment, wanting to play with Xen. I have a server with 2 x 500G SATA drives (no hardware RAID available, have to use software-based RAID1). My partitions are all RAID1 except for swap. I left a little over 400G for my VMs and I would like to use LVM for the disk images. For domU's swap, should I allocate that from the 400G or should that be coming from dom0's partition? I asked because I've seen numerous config options that shows either or.

  Read the article

• What do light purple color mean in uTorrent

  - by blasteralfred

  I run uTorrent 3.1.2 in my Windows 7 PC. When I download one file, I see some purple colored lines under Files Tab Pieces. Below is an image of what I am telling (little resized); I think that the light green color indicates downloaded parts. But I have no idea about purple lines. The file is a streamable mp3 file. The connection speed is very low, about 5KB/s down and 1KB/s up. The done file size is not progressing in a smooth way (usually changes in KB are visible), it stays as it is for sometime and then changes to a size (changes in MB), and again the same thing. Questions: Why does this happen? What does the purple color mean? Thank you.

  Read the article

• Adding localhost entry to Windows\System32\drivers\etc\hosts file with port number

  - by Kamyar

  I have set up a local site under IIS 7.5 under port 900. to access it I should type localhost:900 in the address bar. I'm a little bit familiar with the System32\Drivers\etc\hosts file and I know I can define my custom name with IP adderss there. For example I can add: 127.0.0.1 MyLocalSite and whenever I type in http://MyLocalSite in the browser, The DNS resolves its IP as 127.0.0.1. Is there anyway that I can specify port number in that file as well? (e.g. 127.0.0.1:900 MySecondSite and the DNS resolves it correctly) I tried 127.0.0.1:900 and 127.0.0.1::900 with no luck.

  Read the article

• SBS 2008 reinstall on new machine

  - by Jon

  We purchased a single license on Windows Small Business Server 2008 for a medical office, and soon after a power fault caused the server to overload, destroying the power supply and motherboard. I reinstalled on a new server, and have the domain up and running again, but under system properties it tells me I still need to activate windows, and that the product key currently entered is invalid for activation. I've been trying to figure out how to get in touch with Microsoft to explain the situation and get a new activation key issued without having to pay for another license which we can't afford, but the online documentation hasn't been particularly clear on the subject. Does anyone know how to do that, or if I do need the activation key to continue using SBS 2008? (It currently tells me I have 56 days left to activate) Any tips would be appreciated. I'm not strictly a computer guy and I'm feeling a little lost.

  Read the article

• HOw to deny a particular mac address client not to obtain ip/name from dhcp & dns server..

  - by Deepak Narwal

  Hello Friends... I configures DHCP server on my rhel 5.4 machine.Clients are getting ip from this DHCP server.NO problem upto this.. NOw i want that a particular mac address client do not pick ip from this dhcp server.. Same question is with my DNS server. I want that a particular mac address client do not pick name from this dns server.. PLz discuss in little bit details i am very new in this field.I am learning these things.I hope YOu will give detailed explaiantion.. Thanks IN ADvance friends..

  Read the article

• What should I know before considering a VPS or dedicated server?

  - by Corey Sarnia

  I have a plan for the future for an application and web service. The client will have an application that will send requests to a server-side Java back-end that will process requests, and the server should also be able to host a website, preferably on a WAMP setup (which is what I'm used to; very little *nix knowledge). Now, I cannot provide any hard stats because this is only a plan that's in a discussion stage. However, we do fully expect it will scale enough to need some type of dedicated hosting. My question is this: what types of things should I know about before looking into getting hosting? What should I be asking the hosting providers before I decide on a purchase? When is it appropriate to switch from a VPS to a fully dedicated server?

  Read the article

• Where does gcc keep its built-in include directory paths

  - by Charles

  GCC has built in include directories for certain standard headers. I just need to know where this list is. My newly compiled gcc will not compile my little test C++ program because it cannot find standard headers. I think it fails because of some config options I used to make my file system more organized. I set the bindir and libdir, which I think might have screwed up the built-in include paths for some reason. Program (dummy.c): #include <iostream> void main(){} Command: g++ dummy.c Error: dummy.c:1:20: fatal error: iostream: No such file or directory

  Read the article

• safari 5 doesnt work on my computer.

  - by Amairani409

  I just got the new version of safari y downloaded because my mac tell me there was new version that I should be getting. but when I try to run my this new version of the aplication .nothing happends¡ I mean the program seems to be working but nothing apears in the screen and so when I try to see my top sites a little window show up but it just dont show anything. then 3 seconds later the program shut down¡ I dont know why is happening this Im not so a expert in computers but this really is away of all I see on safari and on mac I got Mac OS X version 10.5.8 2.66ghz intel core 2 duo 4gb 1067 MHz DDR3

  Read the article

• Ubuntu server 11 showing weird characters on console

  - by andySF

  I've installed Ubuntu server 11 after my last hard drive failed to perform. The install process and GRUB screen are OK but I have a problem with the console. I attached two photos because it's difficult for me to describe this issue. I have little knowledge about Linux. My server is used for git, file server, print server. I played with this command dpkg-reconfigure console-setup but no effect. It's nothing physicality wrong with my display or my memory(it's on board). I have run a memtest, and besides that withe the previous version of Ubuntu I've had no problems. The problem.

  Read the article

• How to bring application to front every 15 minutes on Mac OS X Lion?

  - by johnnyb10

  I have a free or cheap little app called Desktop Task Timer LE that I've been using to track my time as I work on various projects. I'd like to have it pop up as the foreground app every 15 minutes to prevent me from forgetting to stop/change the timer after I've moved on to a different task. I know I can have the app launch using a script in Automator or AppleScript, but I don't know how to have that script fire off every 15 minutes. I've read about using Launchd and iCal, but I'm still not sure how to do it. (Actually, iCal is probably simple, but I'd like to avoid using it for this.) Any ideas? Also, a further feature would be to have it pop up after 5 (or x) minutes of inactivity on the computer. Not sure if this would work for my needs, but I'd like to test it if possible.

  Read the article

• Nagios remote monitoring: NRPE Vs. SSH

  - by sam

  We use Nagios to monitor quite a few (~130) servers. We monitor CPU, Disk, RAM and a few other things on each server. I've always used SSH to run the remote commands, purely because it requires little to no additional config on the remote server, just install nagios-plugins, create the nagios user and add the SSH key, all of which I've automated into a shell script. I've never actually considered the performance implications of using SSH over NRPE. I'm not too bothered about the load hit on the Nagios server (It's probably over-speced for what it does, it's never been over 10% CPU), but we run each remote check every 30 seconds and each server has 5 different checks performed. I assume SSH requires more resources for each check but is there a huge difference? (I.E. enough of a difference to warrant the switch to NRPE). If it's any help, we monitor a mix of physical servers (Normally with 8, 12 or 16 physical cores) and Amazon EC2 medium/large instances.

  Read the article

• Notepad++ tabbing out of tags, autocomplete

  - by Matt

  I'm trying to learn a little HTML. Everyone says to use Notepad++ over notepad. I have autocomplete on. My question: When I type my opening tag and Notepad++ then puts"""" closing tag, how do I "jump" out of the tag when I'm done typing? If I tab or hit enter, I'm still stuck before the closing tag. I can use my arrow keys, but if I'm going to do that, I would rather just type the closing tags. Also if I have an UL of 10 items, and I want to change it to an OL, how do I select both the opening and closing tags so I may edit them at the same time? Thanks PS I wasn't able to post the HTML tags.

  Read the article

• Is there a way to import a scheduled task from windows 2003 (.job) to windows 2008 (.xml)?

  - by Rodrigo

  I had some jobs to be moved from the old production server (windows 2003 server standard) to the new machine (windows 2008 server standard), but the new server is unable to read the old .job format, also the import wizard only imports from .xml job files (same version). Obviously I don't want to rebuild all the jobs by hand, but can't find a tool that makes the process a very little easier. I don't trust in Microsoft for this kind of tools, my previously experiences had been to bad (DTS - SSIS). Any ideas? Thanks in advance.

  Read the article

• SSH and Latent Connections (e.g., satellite connections)

  - by user71494

  Most of the week I live in the city where I have a typical broadband connection, but most weekends I'm out of town and only have access to a satellite connection. Trying to work over SSH on a satellite connection, while possible, is hardly desirable due to the high latency ( 1 second). My question is this: Is there any software that will do something like buffering keystrokes on my local machine before they're sent over SSH to help make the lag on individual keystrokes a little bit more transparent? Essentially I'm looking for something that would reduce the effects of the high latency for everything except for commands (e.g., opening files, changing to a new directory, etc.). I've already discovered that vim can open remote files locally and rewrite them remotely, but, while this is a huge help, it is not quite what I'm looking for since it only works when editing files, and requires opening a connection every time a read/write occurs. (For anyone who may not know how to do this and is curious, just use this command: 'vim scp://host/file/path/here)

  Read the article

• Sync two external harddrives?

  - by acidzombie24

  A little mishap happened earlier today and i am thinking i should have a copy of my external harddrive since 10% of it is very valuable. What is the best solution to keep two external harddrive in sync? i'll probably use one as regular and maybe use the other only to copy data. The easiest way to keep it in sync is to clear one drive and copy the other but 1T of data will take a long time. Whats a good existing app that will keep them in sync? freeware preferred.

  Read the article

• Why does my win7 back ground and theme settings reset to default after every reboot ?

  - by JubJub

  I have the new ASUS G73. Everything is perfect, but for unknown reasons to me after customizing the background and theme colors, rebooting resets all these back to default (the theme that originally came with the laptop) Is there a way to stop this madness? Is there some kind of configuration reset app that runs on start up for ASUS computers? This is my first ASUS so I don't know what to expect with the factory bloatware. No, I don't feel like re-installing bare-bones windows just to get rid of the bloatware. Everything works fine except for this one little thing :( Sniff.

  Read the article

• How is it possible to list all folders that a particular user/group has permissions on?

  - by Lord Torgamus

  Is it possible to list all folders/files that a given group has explicit permissions on, for a machine running Windows Server 2003? If so, how? It would be nice to see inherited permissions as well, but I could do with just explicit permissions. A little background: I'm trying to update groups/permissions on a test server. One of the groups, Devs, wasn't implemented correctly when it was created, and my goal is to remove it from the system. It has been replaced by LeadDevelopers, which has permissions on many — but naturally not all — of the same folders. I want to make sure that I don't accidentally orphan any folders or cause any other issues when I remove Devs. It did have some admin-level permissions.

  Read the article

• Web & SQL Hosting 32 vs. 16 GB of ram

  - by TravisK

  I'm in the market for a new dedicated host for my website. My question is I can pay more to upgrade to 32GB of RAM, but it seems overkill for my website right now, in fact, 16GB seems a little overkill. However, I run a lot of pretty intense full text searches for my site. I'm wondering if SQL Server would benefit, or could it be configured to use the 32 GB of RAM if I purchase the additional to help speed things up? I am assuming that most of my latency is caused by disk I/O and that for the extra money spent on RAM, I might not see any improvement in overall speed?

  Read the article

• Can irssi ignore the 24h dsl-reconnect

  - by mcnesium

  A couple of weeks ago I had to switch my ISP from cable to DSL. Now I have this ridiculous disconnect and reconnect every 24h. It's no big deal insofar as having a new IP address every day, but for one exception. Since I host my irssi screen on a machine inside the LAN, my history gets affected by the reconnect in terms of a topic announcement, the users in each channel, creation date and so on. It's about 10 lines of redundant content every day. This is annoying especially in channels with very little traffic, because you hardly see the actual content in line with the every-day-junk. So I was wondering if I can tell irssi to silently ignore the reconnection details, so that my only meta-content in each channel goes back to "Day changed to ...", like back in the days of cable-internet.

  Read the article

• Battery won't charge and BSOD: DRIVER_POWER_STATE_FAILURE

  - by JamesGecko

  I have a Dell Vostro 1510 running Windows 7. Today when I pulled my machine out of it's bag and plugged it in, the little battery light on the side blinked constantly instead of staying solid, and Windows showed a message that the battery was not charging. The battery is 3.5 years old, but it can still hold the machine in standby overnight, so I don't know why it won't charge anymore. After I have had the machine on for a while (20 minutes the first time, 40 minutes the second time), it shows a blue screen of death with the message DRIVER_POWER_STATE_FAILURE and reboots. I can deal with the battery being dead, but not with blue screens of death. Does anyone know how to fix it? Edit: Potentially relevant, this started happening after an OS update was automatically installed on Friday and Windows started nagging to reboot. The first BSOD was before the reboot; the update made a lot of registry changes when the machine came up, and the second BSOD was 40 minutes later.

  Read the article

• first of all nice work,, how to redirect the url of old modified directries

  - by kath

  I really appreciate your hard work after searching lot of web i cannot find the answer so if you get time please try to find what i should so the problem is its a website for classifieds ads before i modified or better word edited the category name but its still showing up in Google index and even in browser URL so is there any way to by pass or redirect it to new one i tried .htaccess but cant get the the result here is the both URL list before modification http://adsbuz.com/vehicles-cars/other-vehicles/selling-my-2010-toyota-sequioa-19500-9585.htm after editing category name (modified one) http://adsbuz.com/vehicles-cars-for-sale/other-vehicles/selling-my-2010-toyota-sequioa-19500-9585.htm (edited category name was before ""vehicles-car"" and after editing is ""vehicles-cars-for-sale"" as you can see both URL opens and not good for seo. and is there any way some one opens wrong url but page opens only with corect url automatically just like in your site.. consider me new in this market and want little help here (the website is in php) thanks Really appreciate your quick response thanks kath

  Read the article

• Is there any way to prevent a Mac from creating dot underscore files?

  - by SoaperGEM

  At work we're letting one of our very tech savvy clients actually help out a little with a few development projects specific to him. However, he uses his own personal Macbook, and as he edits files on our (Windows) networks, his Macbook always creates a bunch of unnecessary meta files that we end up deleting later. For instance, it creates a file called .DS_Store in any directory he opens, as well as "dot underscore" files for each file he edits. So for instance, if he's editing a file called "Main.php", his Macbook will create another file called "._Main.php". I know there are ways to prevent creation of .DS_Store files, but none about how to prevent creation of these hidden files prefixed with dot underscore. Is there any way to turn that off on Macs? Any way to prevent it from creating those files in the first place?

  Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >