Search Results

Search found 8876 results on 356 pages for 'hardware raid'.

Page 188/356 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

  • Windows powering off after login

    - by Jack
    As soon as I logon to Windows 7 64bit, the computer restarts. It isn't a hardware issue, as linux works fine. Windows 7 64 bit. Safe mode, last known good configuration etc, nothing makes any difference. Nor does startup repair or sfc. I used DaRT to check the event log, and nothing is recorded. How can I troubleshoot this?

    Read the article

  • What disk setup is needed / best practice for hypervisor-only servers?

    - by Luke404
    Planning to buy some servers to run an hypervisor (Citrix XenServer or VMware vSphere, still have to decide between the two) we'd like to boot off the local redundant SD card module offered by various vendors (eg. Dell, HP, etc...). The actual VMs will run from an existing iSCSI SAN (which, by the way, can't support booting the servers directly off the SAN). What are the reasons, if any, to choose completely diskless servers VS having some local storage? And what would be the guidelines to choose that local storage? (number of spindles, raid level, etc)

    Read the article

  • Recognition of USB drive

    - by lamcro
    I have a Motorola phone, with a MicroSD slot, which my Ubuntu machine does not recognize as a USB drive. It does know there is something there since It automatically charges my phone whenever I connect it. using the command lsusb shows it as "Motorola PCS" Is there a way to tell Ubuntu/Linux that the connected hardware is a disk drive?

    Read the article

  • Motherboard rejects identical hard drive, one works the other doesn't

    - by Payson Welch
    I have an interesting situation. I have a Dell XS23-SB server that has four blades in it. The blades use Supermicro X7DWT motherboards, and interface with the sata drives through a backplane. I took two identical drives from a raid 0 enclosure that came from the factory (GDrive), one works on all four servers, the other does not. I verified that they both work by plugging them into a hard drive cradle. This behavior can be repeated with other drives, some drives work and some don't. However when i test them, they ALL work on my PC. What could cause this?

    Read the article

  • Sorting out mSSD acceleration on a Acer M3-581TG

    - by PhonicUK
    I recently purchased a Acer Timeline M3 Ultra, it ships with a 500GB HDD and a 20GB mSSD to use as a cache. First thing I did when I got it was format the drives and install a clean OS (on the HDD, the mSSD has nothing on it) - but now I can't figure out how everything needs to be configured in order to use the mSSD as a cache, it just looks like a standard storage drive. I've poked around in the BIOS and there is a SATA mode setting, but it only has one option (AHCI), most of the documentation I've seen on the subject says that the SATA controller needs to be in RAID mode otherwise 'Acceleration' isn't visible in the Intel SRT menu (which for me, it isn't) I've seen a few things that suggest I just need the correct partition layout, I tried this using fdisk from a Linux LiveCD but got nowhere. Any ideas? The laptop shipped with no recovery media so I'm marginally stumped. I don't have any issue with reformatting again if required.

    Read the article

  • Random Computer Crashes

    - by Josh W.
    Ok, here's a wierd one for you all. Occasionally my PC here at work will crash in a very peculiar way. My dual monitors will suddenly go blank as if there is no longer a video signal, the USB mouse light will go dark and mouse stays unresponsive, the keyboard lights will not change status when the appropriate keys are pressed (Num/Caps/Scoll Lock). The CD Tray WILL open and close. But the computer will not respond to a ping request. For all intents & purposes it's as if the computer is off, except it wasn't intentional by me. The power light and internal fans are still on and I've now lost any unsaved work. Now here's where it gets wierd. This PC is part of a batch of PC's we got from a local vendor who does our initial system builds. Mine, and 6 other co-workers PCs all have the same issue. Originally we thought it was a bad combination of hardware, but through trial and error the only thing we haven't eliminated are the OS, Mobo & CPU. The problem was so bad for some of them that they ended up going back to their 5 year old dinosaurs in order to get some work done, for me the problem isn't as bad, maybe once every other day or so, but still enough to bite me in the ass if I've forgotten my ritualistic pressing of CTRL-S every 1-5 minutes. In this case we've tried two different video cards, two different power supplies, two different memory configurations, running on a UPS/not on UPS, updating/rolling back video drivers, three different bios revisions. The only things we haven't swapped are the mobo & cpu, mainly because a new mobo means a new Hardware Abstraction Layer, ie re-install of windows and there's alot of other software on this PC that takes forever to reload by hand. There was a base image that our systems team created with all the drivers installed and the basic setup of software our company uses, but they then must customize the setup for us programmers so it takes a while to get a new configuration up and going. I'm a programmer by day and am usually pretty good at diagnosing computer problems whether through trial and error or not. We've pretty much exhausted all the ideas we can think of here, short of a new mobo/cpu. Was hoping someone out there might have anything else we can try.. Relevant Parts: OS: XP Pro 32-bit Motherboard: Intel DG41RQ CPU: Intel Core-2 Quad Q9400 @ 2.66GHz Current BIOS Version/Date Intel Corp. RQG4110H.86A.0014.2010.0306.1151, 3/6/2010 Dual LCD's, Viewsonic VG930m & Samsung SyncMaster 910v (other people have different models, but listed in case there's some very wierd problem with the signals being sent/received) PS/2 Keyboard USB Microsoft Intellimouse BIOS Versions Tried: R 0013 12/23/2009 R 0014 3/6/2010 Video cards Tried GeForce 8400 GS Radeon HD 4350 - ASUS EAH4350 Two Different Power Supplies a 380W & 550W Ram Configurations 2GB - 1 x 2GB 4GB - 2 x 2GB

    Read the article

  • How to stream TV/Films/Music over the internet to various devices from a home server?

    - by ritch0s
    Set up: An always on old-ish laptop connected to a NAS which contains TV/Films/Music. I want to be able to stream on the fly the data on my NAS to various connected devices such as iphone or laptop. I am currently using Orb (orb.com) mycast software but the requirements for the streaming are very high in terms of processing power is there alternative software and dedicated hardware i can add to get maximum benefit from this setup?

    Read the article

  • Brocade 200E Switch - Fibre Channel

    - by Arthor
    What I have: Fujitsu-Siemens PRIMERGY BX600 Brocade 200E (16 port, 4gbit fibre). My question: Imagine a QNAP with a fiber 10GBIT card connected to the Brocade 200E (16 port, 4gbit fibre). Would this work; would the card drop down to 4GBIT? Are 10GBIT fiber cards backwards completable. Update. I have the specs of my server now.... Fujitsu-Siemens PRIMERGY BX600 S3 Blade Ecosystem Blade Chassis comprising; 2 x A3C40073243 Blade Management modules 2 x A3C40089238 GBE Switch Blade SB9F 30/12 2 x A3C40085736 4Gb 10 port pass through blades 1 x A3C40083767 Digital KVM Modules 2 x A3C40073245 Fan enclosures + cooling fans 4 x A3C40073262 Power Supplies My Goals and Objectives To have a blade system in place for 8 blades for video rendering, the other 2 for database and scripts etc The system will be built on VMWARE ESXi 5 Use ISCSI on the QNAP to support HA and vmotion if needed Users to access the qnap for video editing QANAP has 12 drive (2 x (6 HDD in RAID 10)

    Read the article

  • Repair Lacie 2Big Network 2

    - by Donier
    hi i buy from you Lacie 2big network 2 I was have problem with drive 2 "missed" then i try format HDD to mac os journal end RAW Now i can't connect to the device from network asistant please hep me I can't connect to Doshboard and i can't connect from USB on Lacie 2 big network 2device. I can connect to HDD from Lacie 2big network 2. how create lacie doshbaoard boot on HDD device. i format disks because one of HDD is work not correctly... in the Dashboard RAID menu disk 2 missed.... Thank you i wiil wait your answer....

    Read the article

  • Wirelss card not being detected in backtrack 5

    - by Jesse Nelson
    I just installed backtrack 5 and I am unable to detect my wireless card. iwconfig doesn't list my interface. I can see that the hardware is present in lspci -vnn (see below) but I can't get the interface detected. I have tried to reinstall the compat-wireless package but I get errors during the build (see below) I have done a ton of researching and I keep hitting a brick wall, mostly because the wiki for backtrack is down and I can't find any good resources. Does anyone know how to fix the issue? Also, does anyone no how I can scan the hardware to determine what NIC is assigning my interface? If I can figure out the interface name I think I can set it up manually by putting up the link and using wireless-tools to manually configure the connection, this is what I had to do in arch on my mac. As stated the wiki for backtrack is down and I can't find any help on the issue. I tried to do the full kernel upgrade suggested in my software update but after the update was complete and I logged back in I had a new log in manager and the only thing I was able to log into was window managers. However, after this update my wireless was working fine. Please help I am new to Linux and the wiki is down, I have nowhere else to turn. Forgot to mention I am using the KDE version, not Gnome. Thanks in advance for any help or support. Attempt at make: root@bt:/usr/src/compat-wireless-3.3-rc1-2# make /usr/src/compat-wireless-3.3-rc1-2/config.mk:254: "WARNING: CONFIG_CFG80211_WEXT will be deactivated or not working because kernel was compiled with CONFIG_WIRELESS_EXT=n. Tools using wext interface like iwconfig will not work. To activate it build your kernel e.g. with CONFIG_LIBIPW=m." make -C /lib/modules/2.6.38/build M=/usr/src/compat-wireless-3.3-rc1-2 modules make: *** /lib/modules/2.6.38/build: No such file or directory. Stop. make: *** [modules] Error 2 lspci output: root@bt:/usr/src/compat-wireless-3.3-rc1-2# lspci -vnn -i net lspci: I/O error at net, line 0 root@bt:/usr/src/compat-wireless-3.3-rc1-2# lspci -vnn 02:00.0 Network controller [0280]: Atheros Communications Inc. Device [168c:0032] (rev ff) (prog-if ff) !!! Unknown header type 7f ( This is the problem but I can't find the solution) Kernel modules: ath9k iwconfig output: root@bt:/usr/src/compat-wireless-3.3-rc1-2# iwconfig lo no wireless extensions. eth0 no wireless extensions.

    Read the article

  • VMware + SQL Server - sqlserver.exe not using both CPU cores

    - by fistameeny
    Hi, I am working on a virtual machine that runs SQL Server Express (as part of Sage Line 50 Manufacturing). The details are as follows: Physical Server (host machine) - Intel Xeon Quad Core 2.1GHz - 4GB RAM - VMDK image stored on RAID-5 500GB SATA drives (7200RPM) - Running Ubuntu 10.04 Server 64 bit - VMware Server 2 Virtual Machine - Windows Small Business Server 2003 - Allocated 2 vCPU's and 2GB RAM - Using 100GB pre-allocated flat VMDK file The problem I have is that there is process that runs in SQL Server that is CPU intensive. On the old physical server that we migrated to the virtual machine from, this would utilise both CPU cores so the sqlserver.exe process would be running 100% on each of the CPU cores. On the virtual machine, it only seems to use one of the two CPU cores, meaning that the process is much slower to run. Question Is there a way to force SQL Server (sqlserver.exe process) to use both of the CPU cores, and distribute it's load between them? Is this a VMware setting that needs changing to allow processes to use both cores?

    Read the article

  • Shared storage solution for our sql server backups

    - by Gokhan
    We have 3 clustered sql servers. We have 5+ multi terrabyte databases and their backup files (compressed using quest litespeed) are hitting over 600gb each, We are required to keep at least a week or two weeks (if we can) of weekly full backups and then 6 days differential backups, and a week or 2 weeks worth of log backups local. We are currently limited to 2TB volumes from our san team, we can have multiple volumes but they are expensive ($200 per raw TB per month) and having to deal with many backup volumes instead of a single big volume is difficult. I think if we could have a shared network storage of 20TB+ raid 10 or so for all our servers for keeping the backups and another department will copy them to tape from the network storage and delete files according to the retention period would be good, if this box would be a build in operating system (even unix a complete file storage system) that would be good. What do you guys think, does this make sense to you, is there any manufacturer that sells a storage product like that which that work in a clustered environment? Thank you

    Read the article

  • Feasible to use a laptop as a Digital Media Receiver/Extender?

    - by philosaur
    Since the price of many dedicated hardware Digital Media Extenders is only slightly lower than that of a cheap laptop, is there any reason you couldn't use a laptop as a Digital Media Extender? I'm looking for specific reasons that might make this unworkable. For instance, would the small screen/low-power video card of the laptop prevent the movie from playing well on the TV?

    Read the article

  • Documenting Client Infrastructure

    - by Richard B
    Working on a new project, and need some documentation advice. I need to be able to document ~ 400 client sites to track assets, setup, hardware layout, network layout, etc. We want to have photos, maps, etc. wherever possible. We need this for a call center environment. Has anyone found any off the shelf software that performs this functionality, or are we on our own to develop the tools that we require?

    Read the article

  • Recommendation for a touch-enabled dev laptop

    - by Clay Shannon
    I don't keep up with hardware much, so would appreciate any tips on what would be a good touch-enabled laptop that I could use for both development and testing of Windows 8 ("Metro"/Store) apps. Is there even such an animal (a touch-centric laptop)? Or will I need to use a laptop for development (in which case I might be able to upgrade my RC version of Windows 8 on my existing laptop to RTM) and purchase a tablet for testing?

    Read the article

  • How can I turn my server box into an internet modem?

    - by Robbie Mckennie
    I've been trying to learn about networking, network maintenance, network administration, stuff of that nature (I want to be a network engineer when I get out of university after I get out of high school) and I want to set up my older PC (running Slackware) as a modem, as a project to help me learn. I want to know what kind of hardware I'll need. Pretty much all I know is that my current modem uses ADSL2+ and PPPoA, which I think is a software thing anyway. How can I accomplish this?

    Read the article

  • Can I use BitLocker on a Windows 8 Tablet? How?

    - by Coderer
    I hear that Windows 8 Pro can use full disk encryption. I also understand that Win8 is targeting the "slate" / "tablet" form factor specifically. But all my previous experience with BitLocker requires you to put in some kind of PIN or password at boot time -- how can I do this without a (hardware) keyboard? This preview of an upcoming Win8 tablet mentions BitLocker but doesn't address the PIN issue. Am I missing something?

    Read the article

  • Linux tools to choose suitable Cisco ASA 5500

    - by linuxcore
    I have a linux webhosting server which affects a high DDOS. I want to use Cisco ASA 5500 Series Adaptive Security Appliances to protect the linux server from this DDOS. I know there are many factors should you know before you choose the suitable hardware firewall like the amount of this DDOS and pps ..etc Please suggest a linux tools to measure those factors and to help me collect the required informations ( pps - amount of DDOS - concurrent connections and other factors ) Regards,

    Read the article

  • External hard drive is recognized but not mounted in OS X

    - by Sam Bryant
    My external HD got unplugged without ejecting and my Mac will no longer mount the drive, but it recognizes it's there. I already tried repairing the disk in Disk Utility, and erasing it in Disk Utility, and it still won't mount. I can't imagine the hardware is actually damaged otherwise it wouldn't even recognize it (Right?). Is there any other software solution I can try? Recovering my files is not a concern.

    Read the article

  • IBM Server searching for secondary server

    - by user1241438
    I just bought the following server IBM System x3950 Server, 4 x 3.0GHz Dual Core, 32GB, 6 x 73.4GB 10K SAS RAID, 256MB BBWC, 2x Power, CD-RW/DVD When i boot it up, it says "Searching for secondary server" and hangs their for almost 10 mins. After 10 mins, it says timeout on searching chassis 2. But after this it proceed to boot the OS properly. But my frustration, i need to wait for almost 15 mins to boot everytime. How do i prevent this error message.

    Read the article

  • What is normal SCSI error handling process (scsi_eh_3) CPU time usage?

    - by Kris Jordan
    Last week I got setup with a new dedicated server that is running 4x SCSI drives in RAID 10 on CentOS. The machine is pretty lightly loaded at the moment and has been running for 8 days. The process 'scsi_eh_3' has a CPU time of 13:09.67 in top. This is 3x the next closest CPU time of 4:03.93 for mysqld. Is it normal for the scsi error handling process to use this much CPU time? (Seems like it goes to 0.3% usage ever 5 seconds.) Could this be an indicator that one or more of the drives is having issues?

    Read the article

  • Reverse KVM solution

    - by aksamit
    I need to setup a computer so that it can be operated from two locations. The locations are about 20 meter from each other and the user wants the experience to be the same from both locations, i.e. no remote desktop or anything like that and preferably a seamless switch. So basically I need a double set of, monitor, keyboard and mouse, and then of course link it together by some kind of suitable hardware.

    Read the article

  • Emacs 22 (GTK) cannot be installed on your computer type (i386)

    - by Aravind
    when i was trying to install emacs on Linux Ubuntu .I used to search emacs in add/Remove search toolbar it shows Emacs 22 ..i have double clicked that emacs it shows the following error. Emacs 22 (GTK) Canonical Ltd. provides technical support and security updates for Emacs 22 (GTK) Emacs 22 (GTK) cannot be installed on your computer type (i386). Either the application requires special hardware features or the vendor decided to not support your computer type.

    Read the article

  • Shared storage for web cluster

    - by user52475
    Hi all! Have a big question about shared/clustered/distributed file system for storage. It will shared storage for shared web hosting (web files + maildir) and OpenVZ containers storage . Have any one working example of such system? The options are: Lustre GFS1/GFS2 - GFS2 - as I understand is EXPERIMENTAL... NFS This 3 systems which I consider for shared storage. Now I have storage with HW RAID 10 - 1TB. NFS - As I know there will be problem with locking? GFS/Lustre - problems when there will be a lot of small files , what is typical for hosting environment and problems with maildir.

    Read the article

  • How to configure HA iSCSI for Solaris 10

    - by Noah
    BACKGROUND: We have a StarWind NAS that we are currently using for High Availability storage with our Windows network. Starwind has mirrored drives and multiple ip paths, that the Windows Server combines into one HA disk store. QUESTION: How do I accomplish the same thing under Solaris 10? I've looked at ZFS but to document seems to indicate that ZFS wants to do its own raid/mirroring. I can also attach via iSCSI from Solaris and am presented with both drives being served by the Starwind NS. So, how do I configure solaris so that disk M1 and M2 are considered as a single fault tolerant drive?

    Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >