Search Results

Search found 26048 results on 1042 pages for 'tabbed document interface'.

Page 188/1042 | < Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >

  • European Interoperability Framework - a new beginning?

    - by trond-arne.undheim
    The most controversial document in the history of the European Commission's IT policy is out. EIF is here, wrapped in the Communication "Towards interoperability for European public services", and including the new feature European Interoperability Strategy (EIS), arguably a higher strategic take on the same topic. Leaving EIS aside for a moment, the EIF controversy has been around IPR, defining open standards and about the proper terminology around standardization deliverables. Today, as the document finally emerges, what is the verdict? First of all, to be fair to those among you who do not spend your lives in the intricate labyrinths of Commission IT policy documents on interoperability, let's define what we are talking about. According to the Communication: "An interoperability framework is an agreed approach to interoperability for organisations that want to collaborate to provide joint delivery of public services. Within its scope of applicability, it specifies common elements such as vocabulary, concepts, principles, policies, guidelines, recommendations, standards, specifications and practices." The Good - EIF reconfirms that "The Digital Agenda can only take off if interoperability based on standards and open platforms is ensured" and also confirms that "The positive effect of open specifications is also demonstrated by the Internet ecosystem." - EIF takes a productive and pragmatic stance on openness: "In the context of the EIF, openness is the willingness of persons, organisations or other members of a community of interest to share knowledge and stimulate debate within that community, the ultimate goal being to advance knowledge and the use of this knowledge to solve problems" (p.11). "If the openness principle is applied in full: - All stakeholders have the same possibility of contributing to the development of the specification and public review is part of the decision-making process; - The specification is available for everybody to study; - Intellectual property rights related to the specification are licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software" (p. 26). - EIF is a formal Commission document. The former EIF 1.0 was a semi-formal deliverable from the PEGSCO, a working group of Member State representatives. - EIF tackles interoperability head-on and takes a clear stance: "Recommendation 22. When establishing European public services, public administrations should prefer open specifications, taking due account of the coverage of functional needs, maturity and market support." - The Commission will continue to support the National Interoperability Framework Observatory (NIFO), reconfirming the importance of coordinating such approaches across borders. - The Commission will align its internal interoperability strategy with the EIS through the eCommission initiative. - One cannot stress the importance of using open standards enough, whether in the context of open source or non-open source software. The EIF seems to have picked up on this fact: What does the EIF says about the relation between open specifications and open source software? The EIF introduces, as one of the characteristics of an open specification, the requirement that IPRs related to the specification have to be licensed on FRAND terms or on a royalty-free basis in a way that allows implementation in both proprietary and open source software. In this way, companies working under various business models can compete on an equal footing when providing solutions to public administrations while administrations that implement the standard in their own software (software that they own) can share such software with others under an open source licence if they so decide. - EIF is now among the center pieces of the Digital Agenda (even though this demands extensive inter-agency coordination in the Commission): "The EIS and the EIF will be maintained under the ISA Programme and kept in line with the results of other relevant Digital Agenda actions on interoperability and standards such as the ones on the reform of rules on implementation of ICT standards in Europe to allow use of certain ICT fora and consortia standards, on issuing guidelines on essential intellectual property rights and licensing conditions in standard-setting, including for ex-ante disclosure, and on providing guidance on the link between ICT standardisation and public procurement to help public authorities to use standards to promote efficiency and reduce lock-in.(Communication, p.7)" All in all, quite a few good things have happened to the document in the two years it has been on the shelf or was being re-written, depending on your perspective, in any case, awaiting the storms to calm. The Bad - While a certain pragmatism is required, and governments cannot migrate to full openness overnight, EIF gives a bit too much room for governments not to apply the openness principle in full. Plenty of reasons are given, which should maybe have been put as challenges to be overcome: "However, public administrations may decide to use less open specifications, if open specifications do not exist or do not meet functional interoperability needs. In all cases, specifications should be mature and sufficiently supported by the market, except if used in the context of creating innovative solutions". - EIF does not use the internationally established terminology: open standards. Rather, the EIF introduces the notion of "formalised specification". How do "formalised specifications" relate to "standards"? According to the FAQ provided: The word "standard" has a specific meaning in Europe as defined by Directive 98/34/EC. Only technical specifications approved by a recognised standardisation body can be called a standard. Many ICT systems rely on the use of specifications developed by other organisations such as a forum or consortium. The EIF introduces the notion of "formalised specification", which is either a standard pursuant to Directive 98/34/EC or a specification established by ICT fora and consortia. The term "open specification" used in the EIF, on the one hand, avoids terminological confusion with the Directive and, on the other, states the main features that comply with the basic principle of openness laid down in the EIF for European Public Services. Well, this may be somewhat true, but in reality, Europe is 30 year behind in terminology. Unless the European Standardization Reform gets completed in the next few months, most Member States will likely conclude that they will go on referencing and using standards beyond those created by the three European endorsed monopolists of standardization, CEN, CENELEC and ETSI. Who can afford to begin following the strict Brussels rules for what they can call open standards when, in reality, standards stemming from global standardization organizations, so-called fora/consortia, dominate in the IT industry. What exactly is EIF saying? Does it encourage Member States to go on using non-ESO standards as long as they call it something else? I guess I am all for it, although it is a bit cumbersome, no? Why was there so much interest around the EIF? The FAQ attempts to explain: Some Member States have begun to adopt policies to achieve interoperability for their public services. These actions have had a significant impact on the ecosystem built around the provision of such services, e.g. providers of ICT goods and services, standardisation bodies, industry fora and consortia, etc... The Commission identified a clear need for action at European level to ensure that actions by individual Member States would not create new electronic barriers that would hinder the development of interoperable European public services. As a result, all stakeholders involved in the delivery of electronic public services in Europe have expressed their opinions on how to increase interoperability for public services provided by the different public administrations in Europe. Well, it does not take two years to read 50 consultation documents, and the EU Standardization Reform is not yet completed, so, more pragmatically, you finally had to release the document. Ok, let's leave some of that aside because the document is out and some people are happy (and others definitely not). The Verdict Considering the controversy, the delays, the lobbying, and the interests at stake both in the EU, in Member States and among vendors large and small, this document is pretty impressive. As with a good wine that has not yet come to full maturity, let's say that it seems to be coming in in the 85-88/100 range, but only a more fine-grained analysis, enjoyment in good company, and ultimately, implementation, will tell. The European Commission has today adopted a significant interoperability initiative to encourage public administrations across the EU to maximise the social and economic potential of information and communication technologies. Today, we should rally around this achievement. Tomorrow, let's sit down and figure out what it means for the future.

    Read the article

  • The challenge of communicating externally with IRM secured content

    - by Simon Thorpe
    I am often asked by customers about how they handle sending IRM secured documents to external parties. Their concern is that using IRM to secure sensitive information they need to share outside their business, is troubled with the inability for third parties to install the software which enables them to gain access to the information. It is a very legitimate question and one i've had to answer many times in the past 10 years whilst helping customers plan successful IRM deployments. The operating system does not provide the required level of content security The problem arises from what IRM delivers, persistent security to your sensitive information where ever it resides and whenever it is in use. Oracle IRM gives customers an array of features that help ensure sensitive information in an IRM document or email is always protected and only accessed by authorized users using legitimate applications. Examples of such functionality are; Control of the clipboard, either by disabling completely in the opened document or by allowing the cut and pasting of information between secured IRM documents but not into insecure applications. Protection against programmatic access to the document. Office documents and PDF documents have the ability to be accessed by other applications and scripts. With Oracle IRM we have to protect against this to ensure content cannot be leaked by someone writing a simple program. Securing of decrypted content in memory. At some point during the process of opening and presenting a sealed document to an end user, we must decrypt it and give it to the application (Adobe Reader, Microsoft Word, Excel etc). This process must be secure so that someone cannot simply get access to the decrypted information. The operating system alone just doesn't have the functionality to deliver these types of features. This is why for every IRM technology there must be some extra software installed and typically this software requires administrative rights to do so. The fact is that if you want to have very strong security and access control over a document you are going to send to someone who is beyond your network infrastructure, there must be some software to provide that functionality. Simple installation with Oracle IRM The software used to control access to Oracle IRM sealed content is called the Oracle IRM Desktop. It is a small, free piece of software roughly about 12mb in size. This software delivers functionality for everything a user needs to work with an Oracle IRM solution. It provides the functionality for all formats we support, the storage and transparent synchronization of user rights and unique to Oracle, the ability to search inside sealed files stored on the local computer. In Oracle we've made every technical effort to ensure that installing this software is a simple as possible. In situations where the user's computer is part of the enterprise, this software is typically deployed using existing technologies such as Systems Management Server from Microsoft or by using Active Directory Group Policies. However when sending sealed content externally, you cannot automatically install software on the end users machine. You need to rely on them to download and install themselves. Again we've made every effort for this manual install process to be as simple as we can. Starting with the small download size of the software itself to the simple installation process, most end users are able to install and access sealed content very quickly. You can see for yourself how easily this is done by walking through our free and easy self service demonstration of using sealed content. How to handle objections and ensure there is value However the fact still remains that end users may object to installing, or may simply be unable to install the software themselves due to lack of permissions. This is often a problem with any technology that requires specialized software to access a new type of document. In Oracle, over the past 10 years, we've learned many ways to get over this barrier of getting software deployed by external users. First and I would say of most importance, is the content MUST have some value to the person you are asking to install software. Without some type of value proposition you are going to find it very difficult to get past objections to installing the IRM Desktop. Imagine if you were going to secure the weekly campus restaurant menu and send this to contractors. Their initial response will be, "why on earth are you asking me to download some software just to access your menu!?". A valid objection... there is no value to the user in doing this. Now consider the scenario where you are sending one of your contractors their employment contract which contains their address, social security number and bank account details. Are they likely to take 5 minutes to install the IRM Desktop? You bet they are, because there is real value in doing so and they understand why you are doing it. They want their personal information to be securely handled and a quick download and install of some software is a small task in comparison to dealing with the loss of this information. Be clear in communicating this value So when sending sealed content to people externally, you must be clear in communicating why you are using an IRM technology and why they need to install some software to access the content. Do not try and avoid the issue, you must be clear and upfront about it. In doing so you will significantly reduce the "I didn't know I needed to do this..." responses and also gain respect for being straight forward. One customer I worked with, 6 months after the initial deployment of Oracle IRM, called me panicking that the partner they had started to share their engineering documents with refused to install any software to access this highly confidential intellectual property. I explained they had to communicate to the partner why they were doing this. I told them to go back with the statement that "the company takes protecting its intellectual property seriously and had decided to use IRM to control access to engineering documents." and if the partner didn't respect this decision, they would find another company that would. The result? A few days later the partner had made the Oracle IRM Desktop part of their approved list of software in the company. Companies are successful when sending sealed content to third parties We have many, many customers who send sensitive content to third parties. Some customers actually sell access to Oracle IRM protected content and therefore 99% of their users are external to their business, one in particular has sold content to hundreds of thousands of external users. Oracle themselves use the technology to secure M&A documents, payroll data and security assessments which go beyond the traditional enterprise security perimeter. Pretty much every company who deploys Oracle IRM will at some point be sending those documents to people outside of the company, these customers must be successful otherwise Oracle IRM wouldn't be successful. Because our software is used by a wide variety of companies, some who use it to sell content, i've often run into people i'm sharing a sealed document with and they already have the IRM Desktop installed due to accessing content from another company. The future In summary I would say that yes, this is a hurdle that many customers are concerned about but we see much evidence that in practice, people leap that hurdle with relative ease as long as they are good at communicating the value of using IRM and also take measures to ensure end users can easily go through the process of installation. We are constantly developing new ideas to reducing this hurdle and maybe one day the operating systems will give us enough rich security functionality to have no software installation. Until then, Oracle IRM is by far the easiest solution to balance security and usability for your business. If you would like to evaluate it for yourselves, please contact us.

    Read the article

  • Wireframe mock-up software

    - by Dave Jarvis
    Requirements Looking for wireframe mock-up software for web apps with the following constraints: Desktop application (supports Linux) (can be online) Export all pages to separate image files (PNG or SVG preferred) Template for all pages Drag and drop standard HTML widgets for <forms> Tabbed panels (that allow content on the different tabs) Shuttle controls Saves in an XML format (XSLT could convert to HTML) Widget alignment and resizing (relative to other widgets) Under $100.00 USD Examples That come close: Cacoo - Not a desktop application; does not have a true tabbed panel widget Pencil - Export feature has serious bugs (missing text); no template? Balsamiq - Installation proved cantankerous on Linux (due to Adobe AIR) Mockingbird - No shuttle controls; no auto-resize of widgets Pencil & paper - Not a good look for a formal document presented to clients Any others that meet the requirements?

    Read the article

  • Performance benefits of upgrading Richfaces to newer version

    - by peteDog
    I have a client that's running an application based on JBoss 4.0.5, Seam 1.2 and RichFaces 3.0.1. Their system is having performance problems due to the fact that a lot of data is coming back from the server to be displayed on screen and it seems like the rendering of that data is taking forever. The data brought back is displayed in a tabbed interface, but the tabs aren't currently being loaded individually, but all at once. I'm trying to build up a case to present to the client on the benefits of upgrading to never version of RichFaces, which, as I understand it, has added a great number of features related to tabbed panels and being able to use ajax to page the data and load the chunks you actually need to display at the moment, and not the rest that's in other tabs. The move to a newer version of RichFaces will also result in never versions of Jboss and Seam, as the current production build of RichFaces 3.2.1 requires JSF 1.2. IF anyone has some suggestions or experience on performance of current versions RichFaces, paging, etc, I would really appreciate some feedback.

    Read the article

  • How to Use Images as Navigation with innerfade Slideshow?

    - by Katie
    I am very new to JavaScript and only have the most basic understanding of how it works, so please bear with me. :) I'm using the jquery.innerfade.js script to create a slideshow with fade transitions for a website I'm developing, and I have added navigation buttons (which are set as background-images) that navigate between the “slides”. The navigation buttons have three states: default/off, hover, and on (each state is a separate image). I created a separate JavaScript document to set the buttons to “on” when they are clicked. The “hover” state is achieved through the CSS. Both the slideshow and the navigation buttons work well. There is just one thing I want to add: I would like the appropriate navigation button to display as “on” while the related “slide” is “playing”. Here's the HTML: <div id="mainFeature"> <ul id="theFeature"> <li id="the1feature"><a href="#" name="#promo1"><img src="_images/carousel/promo1.jpg" /></a></li> <li id="the2feature"><a href="#" name="#promo2"><img src="_images/carousel/promo2.jpg" /></a></li> <li id="the3feature"><a href="#" name="#promo3"><img src="_images/carousel/promo3.jpg" /></a></li> </ul> <div id="promonav-con"> <div id="primarypromonav"> <ul class="links"> <li id="the1title" class="promotop"><a rel="1" href="#promo1" class="promo1" id="promo1" onMouseDown="promo1on()"><strong>Botox Cosmetic</strong></a></li> <li id="the2title" class="promotop"><a rel="2" href="#promo2" class="promo2" id="promo2" onMouseDown="promo2on()"><strong>Promo 2</strong></a></li> <li id="the3title" class="promotop"><a rel="3" href="#promo3" class="promo3" id="promo3" onMouseDown="promo3on()"><strong>Promo 3</strong></a></li> </ul> </div> </div> And here is the jquery.innerfade.js, with my changes: (function($) { $.fn.innerfade = function(options) { return this.each(function() { $.innerfade(this, options); }); }; $.innerfade = function(container, options) { var settings = { 'speed': 'normal', 'timeout': 2000, 'containerheight': 'auto', 'runningclass': 'innerfade', 'children': null }; if (options) $.extend(settings, options); if (settings.children === null) var elements = $(container).children(); else var elements = $(container).children(settings.children); if (elements.length > 1) { $(container).css('position', 'relative').css('height', settings.containerheight).addClass(settings.runningclass); for (var i = 0; i < elements.length; i++) { $(elements[i]).css('z-index', String(elements.length-i)).css('position', 'absolute').hide(); }; this.ifchanger = setTimeout(function() { $.innerfade.next(elements, settings, 1, 0); }, settings.timeout); $(elements[0]).show(); } }; $.innerfade.next = function(elements, settings, current, last) { $(elements[last]).fadeOut(settings.speed); $(elements[current]).fadeIn(settings.speed, function() { removeFilter($(this)[0]); }); if ((current + 1) < elements.length) { current = current + 1; last = current - 1; } else { current = 0; last = elements.length - 1; } this.ifchanger = setTimeout((function() { $.innerfade.next(elements, settings, current, last); }), settings.timeout); }; })(jQuery); // **** remove Opacity-Filter in ie **** function removeFilter(element) { if(element.style.removeAttribute){ element.style.removeAttribute('filter'); } } jQuery(document).ready(function() { jQuery('ul#theFeature').innerfade({ speed: 1000, timeout: 7000, containerheight: '291px' }); // jQuery('#mainFeature .links').children('li').children('a').attr('href', 'javascript:void(0);'); jQuery('#mainFeature .links').children('li').children('a').click(function() { clearTimeout(jQuery.innerfade.ifchanger); for(i=1;i<5;i++) { jQuery('#the'+i+'feature').css("display", "none"); //jQuery('#the'+i+'title').children('a').css("background-color","#226478"); } // if(the_widths[(jQuery(this).attr('rel')-1)]==960) { // jQuery("#vic").hide(); // } else { // jQuery("#vic").show(); // } // jQuery('#the'+(jQuery(this).attr('rel'))+'title').css("background-color", "#286a7f"); jQuery('#the'+(jQuery(this).attr('rel'))+'feature').css("display", "block"); clearTimeout(jQuery.innerfade.ifchanger); }); }); And the separate JavaScript that I created: function promo1on() {document.getElementById("promo1").className="promo1on"; document.getElementById("promo2").className="promo2"; document.getElementById("promo2").className="promo2"; } function promo2on() {document.getElementById("promo2").className="promo2on"; document.getElementById("promo1").className="promo1"; document.getElementById("promo3").className="promo3"; } function promo3on() {document.getElementById("promo3").className="promo3on"; document.getElementById("promo1").className="promo1"; document.getElementById("promo2").className="promo2"; } And, finally, the CSS: #mainFeature {float: left; width: 672px; height: 290px; margin: 0 0 9px 0; list-style: none;} #mainFeature li {list-style: none;} #mainFeature #theFeature {margin: 0; padding: 0; position: relative;} #mainFeature #theFeature li {position: absolute; top: 0; left: 0;} #promonav-con {width: 463px; height: 26px; padding: 0; margin: 0; position: absolute; z-index: 900; top: 407px; left: 283px;} #primarypromonav {padding: 0; margin: 0;} #mainFeature .links {padding: 0; margin: 0; list-style: none; position: relative; font-family: arial, verdana, sans-serif; width: 463px; height: 26px;} #mainFeature .links li.promotop {list-style: none; display: block; float: left; display: inline; margin: 0; padding: 0;} #mainFeature .links li a {display: block; float: left; display: inline; height: 26px; text-decoration: none; margin: 0; padding: 0; cursor: pointer;} #mainFeature .links li a strong {margin-left: -9999px;} #mainFeature .links li a.promo1 {background: url(../_images/carouselnav/promo1.gif); width: 155px;} #mainFeature .links li:hover a.promo1 {background: url(../_images/carouselnav/promo1_hover.gif); width: 155px;} #mainFeature .links li a.promo1:hover {background: url(../_images/carouselnav/promo1_hover.gif); width: 155px;} .promo1on {background: url(../_images/carouselnav/promo1_on.gif); width: 155px;} #mainFeature .links li a.promo2 {background: url(../_images/carouselnav/promo2.gif); width: 153px;} #mainFeature .links li:hover a.promo2 {background: url(../_images/carouselnav/promo2_hover.gif); width: 153px;} #mainFeature .links li a.promo2:hover {background: url(../_images/carouselnav/promo2_hover.gif); width: 153px;} .promo2on {background: url(../_images/carouselnav/promo2_on.gif); width: 153px;} #mainFeature .links li a.promo3 {background: url(../_images/carouselnav/promo3.gif); width: 155px;} #mainFeature .links li:hover a.promo3 {background: url(../_images/carouselnav/promo3_hover.gif); width: 155px;} #mainFeature .links li a.promo3:hover {background: url(../_images/carouselnav/promo3_hover.gif); width: 155px;} .promo3on {background: url(../_images/carouselnav/promo3_on.gif); width: 155px;} Hopefully this makes sense! Again, I'm very new to JavaScript/JQuery, so I apologize if this is a mess. I'm very grateful for any suggestions. Thanks!

    Read the article

  • Display all the options if nothing is selected

    - by Levani
    I have four level connected dropdown boxes. I can choose something from second dropdown only after I select something from the first one. The third dropdown is also depended on second one and so on. I need to make selection available in second, third and fourth dropdown, even if there isn't selected anything in previous dropdown, but if the selection is made behave as it behaves now. Am I clear? Here is the code: <table width="100%" border="0" cellspacing="1" cellpadding="4"> <!-- *********************** Countries *********************** --> <tr> <td style="width:150px"><?php if($eaconf->ea_loc_srchtype==0) echo "<b>".JText::_('EA_SRCH_STEP')."</b> 1: ";?><?php echo JText::_('EA_OBJ_COUNTRY'); ?></td> <td > <?php $countrylist[] = JHTML::_('select.option', 'no', JText::_('EA_NOT_SELECTED')); $x=0; foreach($countries as $c){ $countrylist[] = JHTML::_('select.option', $c ,JText::_($countrynames[$x])); $x++; } if($eaconf->ea_loc_srchtype==0){ $countrys['src_country'] = JHTML::_('select.genericlist', $countrylist,'src_country',' class="inputbox" style="width:140px" onChange="setStates(this.selectedIndex-1)"', 'value', 'text','0' ); }else{ $countrys['src_country'] = JHTML::_('select.genericlist', $countrylist,'src_country',' class="inputbox" style="width:140px" ', 'value', 'text','0' ); } ?> <?php echo $countrys['src_country'];?> </td> </tr> <!-- *********************** States *********************** --> <tr> <td ><?php if($eaconf->ea_loc_srchtype==0) echo "<b>".JText::_('EA_SRCH_STEP')."</b> 2: ";?><?php echo JText::_('EA_OBJ_STATE'); ?></td> <td > <?php $statelist[] = JHTML::_('select.option', 'no', JText::_('EA_NOT_SELECTED')); foreach($stateslist as $s){ $statelist[] = JHTML::_('select.option', $s ,JText::_($s)); } if($eaconf->ea_loc_srchtype==0){ $thestates['src_state'] = JHTML::_('select.genericlist', $statelist,'src_state',' class="inputbox" style="width:140px" onChange="setDistricts(this.selectedIndex-1)"', 'value', 'text','0' ); }else{ $thestates['src_state'] = JHTML::_('select.genericlist', $statelist,'src_state',' class="inputbox" style="width:140px" ', 'value', 'text','0' ); } ?> <?php echo $thestates['src_state'];?> </td> </tr> <!-- *********************** Districts ******************** --> <tr> <td > <?php if($eaconf->ea_loc_srchtype==0) echo "<b>".JText::_('EA_SRCH_STEP')."</b> 3: ";?><?php echo JText::_('EA_OBJ_DISTRICT'); ?> </td> <td > <?php $districtlist[] = JHTML::_('select.option', 'no',JText::_('EA_NOT_SELECTED')); foreach($districtslist as $dist){ $districtlist[] = JHTML::_('select.option', $dist ,JText::_($dist)); } if($eaconf->ea_loc_srchtype==0){ $thedistrict['src_district'] = JHTML::_('select.genericlist', $districtlist,'src_district',' class="inputbox" style="width:140px" onChange="setTowns(this.selectedIndex-1)"', 'value', 'text','0' ); }else{ $thedistrict['src_district'] = JHTML::_('select.genericlist', $districtlist,'src_district',' class="inputbox" style="width:140px" ', 'value', 'text','0' ); } ?> <?php echo $thedistrict['src_district'];?> </td> </tr> <!-- *********************** Towns ************************* --> <tr> <td ><?php if($eaconf->ea_loc_srchtype==0) echo "<b>".JText::_('EA_SRCH_STEP')."</b> 4: ";?><?php echo JText::_('EA_OBJ_TOWN'); ?></td> <td > <?php $townlist[] = JHTML::_('select.option', 'no',JText::_('EA_NOT_SELECTED')); foreach($townslist as $town){ $townlist[] = JHTML::_('select.option', $town ,JText::_($town)); } if($eaconf->ea_loc_srchtype==0){ $towns['src_town'] = JHTML::_('select.genericlist', $townlist,'src_town',' class="inputbox" style="width:140px" ', 'value', 'text','0' ); }else{ $towns['src_town'] = JHTML::_('select.genericlist', $townlist,'src_town',' class="inputbox" style="width:140px" ', 'value', 'text','0' ); } ?> <?php echo $towns['src_town'];?> </td> </tr> </table> And the javascript: function setStates(scountry) { sel_state = document.easearch.elements["src_state"]; sel_town = document.easearch.elements["src_town"]; sel_district = document.easearch.elements["src_district"]; empty("src_state"); if(scountry=='no') { new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_state.options.length; sel_state.options[new_opt] = new_entry; sel_state.options[new_opt].value = "no"; sel_state.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; empty("src_district"); new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_district.options.length; sel_district.options[new_opt] = new_entry; sel_district.options[new_opt].value = "no"; sel_district.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; empty("src_town"); new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_town.options.length; sel_town.options[new_opt] = new_entry; sel_town.options[new_opt].value = "no"; sel_town.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; } else{ new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_state.options.length; sel_state.options[new_opt] = new_entry; sel_state.options[new_opt].value = "no"; sel_state.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; for (x=0;x<States[scountry].length;x++ ){ new_entry = new Option(States[scountry][x]); new_opt = sel_state.options.length; sel_state.options[new_opt] = new_entry; sel_state.options[new_opt].value = x; sel_state.options[new_opt].text = States[scountry][x]; } empty("src_district"); new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_district.options.length; sel_district.options[new_opt] = new_entry; sel_district.options[new_opt].value = "no"; sel_district.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; empty("src_town"); new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_town.options.length; sel_town.options[new_opt] = new_entry; sel_town.options[new_opt].value = "no"; sel_town.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; } } function setDistricts(sstate) { scountry = document.easearch.src_country.selectedIndex-1; // sstate = document.easearch.src_state.value; sel_district = document.easearch.elements["src_district"]; empty("src_district"); if(sstate=='no') { new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_district.options.length; sel_district.options[new_opt] = new_entry; sel_district.options[new_opt].value = "no"; sel_district.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; empty("src_town"); new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_town.options.length; sel_town.options[new_opt] = new_entry; sel_town.options[new_opt].value = "no"; sel_town.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; } else{ new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_district.options.length; sel_district.options[new_opt] = new_entry; sel_district.options[new_opt].value = "no"; sel_district.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; for (x=0;x<Districts[scountry][sstate].length;x++ ){ new_entry = new Option(Districts[scountry][sstate][x]); new_opt = sel_district.options.length; sel_district.options[new_opt] = new_entry; sel_district.options[new_opt].value = x; sel_district.options[new_opt].text = Districts[scountry][sstate][x]; } empty("src_town"); new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_town.options.length; sel_town.options[new_opt] = new_entry; sel_town.options[new_opt].value = "no"; sel_town.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; } } function setTowns(sdistrict) { scountry = document.easearch.src_country.selectedIndex-1; sstate = document.easearch.src_state.value; sel_town = document.easearch.elements["src_town"]; sel_district = document.easearch.elements["src_district"]; empty("src_town"); if(sdistrict=='no') { new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_town.options.length; sel_town.options[new_opt] = new_entry; sel_town.options[new_opt].value = "no"; sel_town.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; empty("src_district"); new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_district.options.length; sel_district.options[new_opt] = new_entry; sel_district.options[new_opt].value = "no"; sel_district.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; } else{ new_entry = new Option("<?php echo JText::_('EA_NOT_SELECTED');?>"); new_opt = sel_town.options.length; sel_town.options[new_opt] = new_entry; sel_town.options[new_opt].value = "no"; sel_town.options[new_opt].text = "<?php echo JText::_('EA_NOT_SELECTED');?>"; for (x=0;x<Towns[scountry][sstate][sdistrict].length;x++ ){ new_entry = new Option(Towns[scountry][sstate][sdistrict][x]); new_opt = sel_town.options.length; sel_town.options[new_opt] = new_entry; sel_town.options[new_opt].value = x; sel_town.options[new_opt].text = Towns[scountry][sstate][sdistrict][x]; } } } function empty(field) { document.easearch.elements[field].options.length = 0; }

    Read the article

  • Customize Annotation problem....Plz Help.. !!

    - by user128647
    I want to show my custom UIView(.Xib View) to appear when user tabbed on pins (not apple's callOutBubble) and in that UIView there should be a button which fires an IBAction on touched down event. Therefore i have added an AddObserver method to MKAnnotationView. which responds to touch events over pin in MKMapView. But i have also added 3 buttons over that XIB view, which have also assined IBActions. But when i run application, Buttons in Customized Annotation view are not responding to IBAction (Touch Down)? Why this happens ?? What is the solution for that??? I need to have called some method, when those 3 buttons tabbed. Thanks

    Read the article

  • Multi-tab application (C#)

    - by Zach
    Hi, I'm creating a multi-tabbed .NET application that allows the user to dynamically add and remove tabs at runtime. When a new tab is added, a control is added to it (as a child), in which the contents can be edited (eg. a text box). The user can perform tasks on the currently visible text box using a toolbar/menu bar. To better explain this, look at the picture below to see an example of what I want to accomplish. It's just a mock-up, so it doesn't actually work that way, but it shows what I want to get done. Essentially, like a multi-tabbed Notepad. View the image here: http://picasion.com/pic15/324b466729e42a74b9632c1473355d3b.gif Is this possible in .NET? I'm pretty sure it is, I'm just looking for a way that it can be implemented.

    Read the article

  • Q1 2010 New Feature: Paging with RadGridView for Silverlight and WPF

    We are glad to announce that the Q1 2010 Release has added another weapon to RadGridViews growing arsenal of features. This is the brand new RadDataPager control which provides the user interface for paging through a collection of data. The good news is that RadDataPager can be used to page any collection. It does not depend on RadGridView in any way, so you will be free to use it with the rest of your ItemsControls if you chose to do so. Before you read on, you might want to download the samples solution that I have attached. It contains a sample project for every scenario that I will discuss later on. Looking at the code while reading will make things much easier for you. There is something for everyone among the 10 Visual Studio projects that are included in the solution. So go and grab it. I. Paging essentials The single most important piece of software concerning paging in Silverlight is the System.ComponentModel.IPagedCollectionView interface. Those of you who are on the WPF front need not worry though. As you might already know, Teleriks Silverlight and WPF controls is share the same code-base. Since WPF does not contain a similar interface, Telerik has provided its own Telerik.Windows.Data.IPagedCollectionView. The IPagedCollectionView interface contains several important members which are used by RadGridView to perform the actual paging. Silverlight provides a default implementation of this interface which, naturally, is called PagedCollectionView. You should definitely take a look at its source code in case you are interested in what is going on under the hood. But this is not a prerequisite for our discussion. The WPF default implementation of the interface is Teleriks QueryableCollectionView which, among many other interfaces, implements IPagedCollectionView. II. No Paging In order to gradually build up my case, I will start with a very simple example that lacks paging whatsoever. It might sound stupid, but this will help us build on top of this paging-devoid example. Let us imagine that we have the simplest possible scenario. That is a simple IEnumerable and an ItemsControl that shows its contents. This will look like this: No Paging IEnumerable itemsSource = Enumerable.Range(0, 1000); this.itemsControl.ItemsSource = itemsSource; XAML <Border Grid.Row="0" BorderBrush="Black" BorderThickness="1" Margin="5">     <ListBox Name="itemsControl"/> </Border> <Border Grid.Row="1" BorderBrush="Black" BorderThickness="1" Margin="5">     <TextBlock Text="No Paging"/> </Border> Nothing special for now. Just some data displayed in a ListBox. The two sample projects in the solution that I have attached are: NoPaging_WPF NoPaging_SL3 With every next sample those two project will evolve in some way or another. III. Paging simple collections The single most important property of RadDataPager is its Source property. This is where you pass in your collection of data for paging. More often than not your collection will not be an IPagedCollectionView. It will either be a simple List<T>, or an ObservableCollection<T>, or anything that is simply IEnumerable. Unless you had paging in mind when you designed your project, it is almost certain that your data source will not be pageable out of the box. So what are the options? III. 1. Wrapping the simple collection in an IPagedCollectionView If you look at the constructors of PagedCollectionView and QueryableCollectionView you will notice that you can pass in a simple IEnumerable as a parameter. Those two classes will wrap it and provide paging capabilities over your original data. In fact, this is what RadGridView does internally. It wraps your original collection in an QueryableCollectionView in order to easily perform many useful tasks such as filtering, sorting, and others, but in our case the most important one is paging. So let us start our series of examples with the most simplistic one. Imagine that you have a simple IEnumerable which is the source for an ItemsControl. Here is how to wrap it in order to enable paging: Silverlight IEnumerable itemsSource = Enumerable.Range(0, 1000); var pagedSource = new PagedCollectionView(itemsSource); this.radDataPager.Source = pagedSource; this.itemsControl.ItemsSource = pagedSource; WPF IEnumerable itemsSource = Enumerable.Range(0, 1000); var pagedSource = new QueryableCollectionView(itemsSource); this.radDataPager.Source = pagedSource; this.itemsControl.ItemsSource = pagedSource; XAML <Border Grid.Row="0"         BorderBrush="Black"         BorderThickness="1"         Margin="5">     <ListBox Name="itemsControl"/> </Border> <Border Grid.Row="1"         BorderBrush="Black"         BorderThickness="1"         Margin="5">     <telerikGrid:RadDataPager Name="radDataPager"                               PageSize="10"                              IsTotalItemCountFixed="True"                              DisplayMode="All"/> This will do the trick. It is quite simple, isnt it? The two sample projects in the solution that I have attached are: PagingSimpleCollectionWithWrapping_WPF PagingSimpleCollectionWithWrapping_SL3 III. 2. Binding to RadDataPager.PagedSource In case you do not like this approach there is a better one. When you assign an IEnumerable as the Source of a RadDataPager it will automatically wrap it in a QueryableCollectionView and expose it through its PagedSource property. From then on, you can attach any number of ItemsControls to the PagedSource and they will be automatically paged. Here is how to do this entirely in XAML: Using RadDataPager.PagedSource <Border Grid.Row="0"         BorderBrush="Black"         BorderThickness="1" Margin="5">     <ListBox Name="itemsControl"              ItemsSource="{Binding PagedSource, ElementName=radDataPager}"/> </Border> <Border Grid.Row="1"         BorderBrush="Black"         BorderThickness="1"         Margin="5">     <telerikGrid:RadDataPager Name="radDataPager"                               Source="{Binding ItemsSource}"                              PageSize="10"                              IsTotalItemCountFixed="True"                              DisplayMode="All"/> The two sample projects in the solution that I have attached are: PagingSimpleCollectionWithPagedSource_WPF PagingSimpleCollectionWithPagedSource_SL3 IV. Paging collections implementing IPagedCollectionView Those of you who are using WCF RIA Services should feel very lucky. After a quick look with Reflector or the debugger we can see that the DomainDataSource.Data property is in fact an instance of the DomainDataSourceView class. This class implements a handful of useful interfaces: ICollectionView IEnumerable INotifyCollectionChanged IEditableCollectionView IPagedCollectionView INotifyPropertyChanged Luckily, IPagedCollectionView is among them which lets you do the whole paging in the server. So lets do this. We will add a DomainDataSource control to our page/window and connect the items control and the pager to it. Here is how to do this: MainPage <riaControls:DomainDataSource x:Name="invoicesDataSource"                               AutoLoad="True"                               QueryName="GetInvoicesQuery">     <riaControls:DomainDataSource.DomainContext>         <services:ChinookDomainContext/>     </riaControls:DomainDataSource.DomainContext> </riaControls:DomainDataSource> <Border Grid.Row="0"         BorderBrush="Black"         BorderThickness="1"         Margin="5">     <ListBox Name="itemsControl"              ItemsSource="{Binding Data, ElementName=invoicesDataSource}"/> </Border> <Border Grid.Row="1"         BorderBrush="Black"         BorderThickness="1"         Margin="5">     <telerikGrid:RadDataPager Name="radDataPager"                               Source="{Binding Data, ElementName=invoicesDataSource}"                              PageSize="10"                              IsTotalItemCountFixed="True"                              DisplayMode="All"/> By the way, you can replace the ListBox from the above code snippet with any other ItemsControl. It can be RadGridView, it can be the MS DataGrid, you name it. Essentially, RadDataPager is sending paging commands to the the DomainDataSource.Data. It does not care who, what, or how many different controls are bound to this same Data property of the DomainDataSource control. So if you would like to experiment with this, you can throw in any number of other ItemsControls next to the ListBox, bind them in the same manner, and all of them will be paged by our single RadDataPager. Furthermore, you can throw in any number of RadDataPagers and bind them to the same property. Then when you page with any one of them will automatically update all of the rest. The whole picture is simply beautiful and we can do all of this thanks to WCF RIA Services. The two sample projects (Silverlight only) in the solution that I have attached are: PagingIPagedCollectionView PagingIPagedCollectionView.Web IV. Paging RadGridView While you can replace the ListBox in any of the above examples with a RadGridView, RadGridView offers something extra. Similar to the DomainDataSource.Data property, the RadGridView.Items collection implements the IPagedCollectionView interface. So you are already thinking: Then why not bind the Source property of RadDataPager to RadGridView.Items? Well thats exactly what you can do and you will start paging RadGridView out-of-the-box. It is as simple as that, no code-behind is involved: MainPage <Border Grid.Row="0"         BorderBrush="Black"         BorderThickness="1" Margin="5">     <telerikGrid:RadGridView Name="radGridView"                              ItemsSource="{Binding ItemsSource}"/> </Border> <Border Grid.Row="1"         BorderBrush="Black"         BorderThickness="1"         Margin="5">     <telerikGrid:RadDataPager Name="radDataPager"                               Source="{Binding Items, ElementName=radGridView}"                              PageSize="10"                              IsTotalItemCountFixed="True"                              DisplayMode="All"/> The two sample projects in the solution that I have attached are: PagingRadGridView_SL3 PagingRadGridView_WPF With this last example I think I have covered every possible paging combination. In case you would like to see an example of something that I have not covered, please let me know. Also, make sure you check out those great online examples: WCF RIA Services with DomainDataSource Paging Configurator Endless Paging Paging Any Collection Paging RadGridView Happy Paging! Download Full Source Code Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

    Read the article

  • Building a &ldquo;real&rdquo; extension for Expression Blend

    - by Timmy Kokke
    .Last time I showed you how to get started building extensions for Expression Blend. Lets build a useful extension this time and go a bit deeper into Blend. Source of project  => here Compiled dll => here (extract into /extensions folder of Expression Blend)   The Extension When working on large Xaml files in Blend it’s often hard to find a specific control in the "Objects and Timeline Pane”. An extension that searches the active document and presents all elements that satisfy the query would be helpful. When the user starts typing a search query a search will be performed and the results are shown in the list. After the user selects an item in the results list, the control in the "Objects and Timeline Pane” will be selected. Below is a sketch of what it is going to look like. The Solution Create a new WPF User Control project as shown in the earlier tutorial in the Configuring the extension project section, but name it AdvancedSearch this time. Delete the default UserControl1.Xaml to clear the solution (a new user control will be added later thought, but adding a user control is easier then renaming one). Create the main entry point of the addin by adding a new class to the solution and naming this  AdvancedSearchPackage. Add a reference to Microsoft.Expression.Extensibility and to System.ComponentModel.Composition . Implement the IPackage interface and add the Export attribute from the MEF to the definition. While you’re at it. Add references to Microsoft.Expression.DesignSurface, Microsoft.Expression.FrameWork and Microsoft.Expression.Markup. These will be used later. The Load method from the IPackage interface is going to create a ViewModel to bind to from the UI. Add another class to the solution and name this AdvancedSearchViewModel. This class needs to implement the INotifyPropertyChanged interface to enable notifications to the view.  Add a constructor to the class that takes an IServices interface as a parameter. Create a new instance of the AdvancedSearchViewModel in the load method in the AdvanceSearchPackage class. The AdvancedSearchPackage class should looks like this now:   using System.ComponentModel.Composition; using Microsoft.Expression.Extensibility;   namespace AdvancedSearch { [Export(typeof(IPackage))] public class AdvancedSearchPackage:IPackage {   public void Load(IServices services) { new AdvancedSearchViewModel(services); }   public void Unload() { } } }   Add a new UserControl to the project and name this AdvancedSearchView. The View will be created by the ViewModel, which will pass itself to the constructor of the view. Change the constructor of the View to take a AdvancedSearchViewModel object as a parameter. Add a private field to store the ViewModel and set this field in the constructor. Point the DataContext of the view to the ViewModel. The View will look something like this now:   namespace AdvancedSearch { public partial class AdvancedSearchView:UserControl { private readonly AdvancedSearchViewModel _advancedSearchViewModel;   public AdvancedSearchView(AdvancedSearchViewModel advancedSearchViewModel) { _advancedSearchViewModel = advancedSearchViewModel; InitializeComponent(); this.DataContext = _advancedSearchViewModel; } } }   The View is going to be created in the constructor of the ViewModel and stored in a read only property.   public FrameworkElement View { get; private set; }   public AdvancedSearchViewModel(IServices services) { _services = services; View = new AdvancedSearchView(this); } The last thing the solution needs before we’ll wire things up is a new class, PossibleNode. This class will be used later to store the search results. The solution should look like this now:   Adding UI to the UI The extension should build and run now, although nothing is showing up in Blend yet. To enable the user to perform a search query add a TextBox and a ListBox to the AdvancedSearchView.xaml file. I’ve set the rows of the grid too to make them look a little better. Add the TextChanged event to the TextBox and the SelectionChanged event to the ListBox, we’ll need those later on. <Grid> <Grid.RowDefinitions> <RowDefinition Height="32" /> <RowDefinition Height="*" /> </Grid.RowDefinitions> <TextBox TextChanged="SearchQueryTextChanged" HorizontalAlignment="Stretch" Margin="4" Name="SearchQuery" VerticalAlignment="Stretch" /> <ListBox SelectionChanged="SearchResultSelectionChanged" HorizontalAlignment="Stretch" Margin="4" Name="SearchResult" VerticalAlignment="Stretch" Grid.Row="1" /> </Grid>   This will create a user interface like: To make the View show up in Blend it has to be registered with the WindowService. The GetService<T> method is used to get services from Blend, which are your entry points into Blend.When writing extensions you will encounter this method very often. In this case we’re asking for an IWindowService interface. The IWindowService interface serves events for changing windows and themes, is used for adding or removing resources and is used for registering and unregistering Palettes. All panes in Blend are palettes and are registered thru the RegisterPalette method. The first parameter passed to this method is a string containing a unique ID for the palette. This ID can be used to get access to the palette later. The second parameter is the View. The third parameter is a title for the pane. This title is shown when the pane is visible. It is also shown in the window menu of Blend. The last parameter is a KeyBinding. I have chosen Ctrl+Shift+F to call the Advanced Search pane. This value is also shown in the window menu of Blend.   services.GetService<IWindowService>().RegisterPalette( "AdvancedSearch", viewModel.View, "Advanced Search", new KeyBinding { Key = Key.F, Modifiers = ModifierKeys.Control | ModifierKeys.Shift } );   You can compiler and run now. After Blend starts you can hit Ctrl+Shift+F or go the windows menu to call the advanced search extension. Searching for controls The search has to be cleared on every change of the active document. The DocumentServices fires an event every time a new document is opened, a document is closed or another document view is selected. Add the following line to the constructor of the ViewModel to handle the ActiveDocumentChanged event:   _services.GetService<IDocumentService>().ActiveDocumentChanged += ActiveDocumentChanged;   And implement the ActiveDocumentChanged method:   private void ActiveDocumentChanged(object sender, DocumentChangedEventArgs e) { }   To get to the contents of the document we first need to get access to the “Objects and Timeline” pane. This pane is registered in the PaletteRegistry in the same way as this extension has registered itself. The palettes are accessible thru an associative array. All you need to provide is the Identifier of the palette you want. The Id of the “Objects and Timeline” pane is “Designer_TimelinePane”. I’ve included a list of the other default panes at the bottom of this article. Each palette has a Content property which can be cast to the type of the pane.   var timelinePane = (TimelinePane)_services.GetService<IWindowService>() .PaletteRegistry["Designer_TimelinePane"] .Content;   Add a private field to the top of the AdvancedSearchViewModel class to store the active SceneViewModel. The SceneViewModel is needed to set the current selection and to get the little icons for the type of control.   private SceneViewModel _activeSceneViewModel;   When the active SceneViewModel changes, the ActiveSceneViewModel is stored in this field. The list of possible nodes is cleared and an PropertyChanged event is fired for this list to notify the UI to clear the list. This will make the eventhandler look like this: private void ActiveDocumentChanged(object sender, DocumentChangedEventArgs e) { var timelinePane = (TimelinePane)_services.GetService<IWindowService>() .PaletteRegistry["Designer_TimelinePane"].Content;   _activeSceneViewModel = timelinePane.ActiveSceneViewModel; PossibleNodes = new List<PossibleNode>(); InvokePropertyChanged("PossibleNodes"); } The PossibleNode class used to store information about the controls found by the search. It’s a dumb data class with only 3 properties, the name of the control, the SceneNode and a brush used for the little icon. The SceneNode is the base class for every possible object you can create in Blend, like Brushes, Controls, Annotations, ResourceDictionaries and VisualStates. The entire PossibleNode class looks like this:   using System.Windows.Media; using Microsoft.Expression.DesignSurface.ViewModel;   namespace AdvancedSearch { public class PossibleNode { public string Name { get; set; } public SceneNode SceneNode { get; set; } public DrawingBrush IconBrush { get; set; } } }   Add these two methods to the AdvancedSearchViewModel class:   public void Search(string searchText) { } public void SelectElement(PossibleNode node){ }   Both these methods are going to be called from the view. The Search method performs the search and updates the PossibleNodes list.  The controls in the active document can be accessed thru TimeLineItemsManager class. This class contains a read only collection of TimeLineItems. By using a Linq query the possible nodes are selected and placed in the PossibleNodes list.   var timelineItemManager = new TimelineItemManager(_activeSceneViewModel); PossibleNodes = new List<PossibleNode>( (from d in timelineItemManager.ItemList where d.DisplayName.ToLowerInvariant().StartsWith( searchText.ToLowerInvariant()) select new PossibleNode() { IconBrush = d.IconBrush, SceneNode = d.SceneNode, Name = d.DisplayName }).ToList() ); InvokePropertyChanged(InternalConst.PossibleNodes);   The Select method is pretty straight forward. It contains two lines.The first to clear the selection. Otherwise the selected element would be added to the current selection. The second line selects the nodes. It is given a new array with the node to be selected.   _activeSceneViewModel.ClearSelections(); _activeSceneViewModel.SelectNodes(new[] { node.SceneNode });   The last thing that needs to be done is to wire the whole thing to the View. The two event handlers just call the Search and SelectElement methods on the ViewModel.   private void SearchQueryTextChanged(object sender, TextChangedEventArgs e) { _advancedSearchViewModel.Search(SearchQuery.Text); }   private void SearchResultSelectionChanged(object sender, SelectionChangedEventArgs e) { if(e.AddedItems.Count>0) { _advancedSearchViewModel.SelectElement(e.AddedItems[0] as PossibleNode); } }   The Listbox has to be bound to the PossibleNodes list and a simple DataTemplate is added to show the selection. The IconWithOverlay control can be found in the Microsoft.Expression.DesignSurface.UserInterface.Timeline.UI namespace in the Microsoft.Expression.DesignSurface assembly. The ListBox should look something like:   <ListBox SelectionChanged="SearchResultSelectionChanged" HorizontalAlignment="Stretch" Margin="4" Name="SearchResult" VerticalAlignment="Stretch" Grid.Row="1" ItemsSource="{Binding PossibleNodes}"> <ListBox.ItemTemplate> <DataTemplate> <StackPanel Orientation="Horizontal"> <tlui:IconWithOverlay Margin="2,0,10,0" Width="12" Height="12" SourceBrush="{Binding Path=IconBrush, Mode=OneWay}" /> <TextBlock Text="{Binding Name}"/> </StackPanel> </DataTemplate> </ListBox.ItemTemplate> </ListBox>   Compile and run. Inside Blend the extension could look something like below. What’s Next When you’ve got the extension running. Try placing breakpoints in the code and see what else is in there. There’s a lot to explore and build extension on. I personally would love an extension to search for resources. Last but not least, you can download the source of project here.  If you have any questions let me know. If you just want to use this extension, you can download the compiled dll here. Just extract the . zip into the /extensions folder of Expression Blend. Notes Target framework I ran into some issues when using the .NET Framework 4 Client Profile as a target framework. I got some strange error saying certain obvious namespaces could not be found, Microsoft.Expression in my case. If you run into something like this, try setting the target framework to .NET Framework 4 instead of the client version.   Identifiers of default panes Identifier Type Title Designer_TimelinePane TimelinePane Objects and Timeline Designer_ToolPane ToolPane Tools Designer_ProjectPane ProjectPane Projects Designer_DataPane DataPane Data Designer_ResourcePane ResourcePane Resources Designer_PropertyInspector PropertyInspector Properties Designer_TriggersPane TriggersPane Triggers Interaction_Skin SkinView States Designer_AssetPane AssetPane Assets Interaction_Parts PartsPane Parts Designer_ResultsPane ResultsPane Results

    Read the article

  • CodePlex Daily Summary for Wednesday, May 23, 2012

    CodePlex Daily Summary for Wednesday, May 23, 2012Popular ReleasesChristoc's DotNetNuke Module Development Template: 00.00.08 for DNN6: BEFORE USE YOU need to install the MSBuild Community Tasks available from http://msbuildtasks.tigris.org For best results you should configure your development environment as described in this blog post Then read this latest blog post about customizing and using these custom templates. Installation is simple To use this template place the ZIP (not extracted) file in your My Documents\Visual Studio 2010\Templates\ProjectTemplates\Visual C#\Web OR for VB My Documents\Visual Studio 2010\Te...Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.53: fix issue #18106, where member operators on numeric literals caused the member part to be duplicated when not minifying numeric literals ADD NEW FEATURE: ability to create source map files! The first mapfile format to be supported is the Script# format. Use the new -map filename switch to create map files when building your sources.Microsoft SQL Server Product Samples: Database: AdventureWorks 2008 Analysis Services Project: AdventureWorks 2008 Analysis Services sample database project files. Project files for Analysis Services 2008 sample cubes (standard and enterprise). Lessons 1 to 10 tutorial files.HigLabo: HigLabo_20120522: Bug fix of EncodeToMailHeaderLine method when TransferEncoding is QuotedPrintable and Encoding is not ASCII.BlackJumboDog: Ver5.6.3: 2012.05.22 Ver5.6.3  (1) HTTP????????、ftp://??????????????????????LogicCircuit: LogicCircuit 2.12.5.22: Logic Circuit - is educational software for designing and simulating logic circuits. Intuitive graphical user interface, allows you to create unrestricted circuit hierarchy with multi bit buses, debug circuits behavior with oscilloscope, and navigate running circuits hierarchy. Changes of this versionThis release is fixing start up issue.Internals Viewer (updated) for SQL Server 2008 R2.: Internals Viewer for SSMS 2008 R2: Updated code to work with SSMS 2008 R2. Changed dependancies, removing old assemblies no longer present and replacing them with updated versions.Orchard Project: Orchard 1.4.2: This is a service release to address 1.4 and 1.4.1 bugs. Please read our release notes for Orchard 1.4.2: http://docs.orchardproject.net/Documentation/Orchard-1-4-Release-NotesVirtu: Virtu 0.9.2: Source Requirements.NET Framework 4 Visual Studio 2010 with SP1 or Visual Studio 2010 Express with SP1 Silverlight 5 Tools for Visual Studio 2010 with SP1 Windows Phone 7 Developer Tools (which includes XNA Game Studio 4) Binaries RequirementsSilverlight 5 .NET Framework 4 XNA Framework 4SharePoint Euro 2012 - UEFA European Football Predictor: havivi.euro2012.wsp (1.0): New fetures:View other users predictions Hide/Show background image (web part property) Installing SharePoint Euro 2012 PredictorSharePoint Euro 2012 Predictor has been developed as a SharePoint Sandbox solution to support SharePoint Online (Office 365) Download the solution havivi.euro2012.wsp from the download page: Downloads Upload this solution to your Site Collection via the solutions area. Click on Activate to make the web parts in the solution available for use in the Site C...Metadata Document Generator for Microsoft Dynamics CRM 2011: Metadata Document Generator (2.0.0.0): New UI Metro style New features Save and load settings to/from file Export only OptionSet attributes Use of Gembox Spreadsheet to generate Excel (makes application lighter : 1,5MB instead of 7MB)Audio Pitch & Shift: Audio Pitch And Shift 4.2.0: Backward / Forward buttons Improved features for encoding, streaming, menu Bug fixesSilverlight socket component: Smark.NetDisk: Smark.NetDisk?????Silverlight ?.net???????????,???????????????????????。Smark.NetDisk??????????,????.net???????????????????????tcp??;???????Silverlight??????????????????????callisto: callisto 2.0.28: Update log: - Extended Scribble protocol. - Updated HTML5 client code - now supports the latest versions of Google Chrome.ExtAspNet: ExtAspNet v3.1.6: ExtAspNet - ?? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ?????????? ExtAspNet ????? ExtJS ??? ASP.NET 2.0 ???,????? AJAX ??????????。 ExtAspNet ??????? JavaScript,?? CSS,?? UpdatePanel,?? ViewState,?? WebServices ???????。 ??????: IE 7.0, Firefox 3.6, Chrome 3.0, Opera 10.5, Safari 3.0+ ????:Apache License 2.0 (Apache) ??:http://bbs.extasp.net/ ??:http://demo.extasp.net/ ??:http://doc.extasp.net/ ??:http://extaspnet.codeplex.com/ ??:http://sanshi.cnblogs.com/ ????: +2012-05-20 v3.1.6 -??RowD...Dynamics XRM Tools: Dynamics XRM Tools BETA 1.0: The Dynamics XRM Tools 1.0 BETA is now available Seperate downloads are available for On Premise and Online as certain features are only available On Premise. This is a BETA build and may not resemble the final release. Many enhancements are in development and will be made available soon. Please provide feedback so that we may learn and discover how to make these tools better.PHPExcel: PHPExcel 1.7.7: See Change Log for details of the new features and bugfixes included in this release. BREAKING CHANGE! From PHPExcel 1.7.8 onwards, the 3rd-party tcPDF library will no longer be bundled with PHPExcel for rendering PDF files through the PDF Writer. The PDF Writer is being rewritten to allow a choice of 3rd party PDF libraries (tcPDF, mPDF, and domPDF initially), none of which will be bundled with PHPExcel, but which can be downloaded seperately from the appropriate sites.GhostBuster: GhostBuster Setup (91520): Added WMI based RestorePoint support Removed test code from program.cs Improved counting. Changed color of ghosted but unfiltered devices. Changed HwEntries into an ObservableCollection. Added Properties Form. Added Properties MenuItem to Context Menu. Added Hide Unfiltered Devices to Context Menu. If you like this tool, leave me a note, rate this project or write a review or Donate to Ghostbuster. Donate to GhostbusterEXCEL??、??、????????:DataPie(??MSSQL 2008、ORACLE、ACCESS 2007): DataPie_V3.2: V3.2, 2012?5?19? ????ORACLE??????。AvalonDock: AvalonDock 2.0.0795: Welcome to the Beta release of AvalonDock 2.0 After 4 months of hard work I'm ready to upload the beta version of AvalonDock 2.0. This new version boosts a lot of new features and now is stable enough to be deployed in production scenarios. For this reason I encourage everyone is using AD 1.3 or earlier to upgrade soon to this new version. The final version is scheduled for the end of June. What is included in Beta: 1) Stability! thanks to all users contribution I’ve corrected a lot of issues...New ProjectsAits HRM: Human Resource ManagermentBeeWix Toolkit: The toolkit is a set of classes we are using here at Beewix for our Social Network project. Church Management: Simple Church Management Software By Lalit Kumar & Ivan Lewis.Client Center for ConfigurationManager: The tool is designed for IT Professionals to troubleshoot SCCM/CM12 Client related Issues. The Client Center for Configuration Manager provides a quick and easy overview of client settings, including running services and Agent settings in a good easy to use, user interface.Common Instance Factory: Provides an abstraction over dependency injection and IoC containers using the abstract factory design pattern. It was created as an alternative to the Common Service Locator, but it does not use the service location anti-pattern and it provides support for releasing instances. Adapters are available for various dependency injection containers, such as Ninject and SimpleInjector, with more to come shortly. There are also WCF extensions available for decoupling services from DI containers.ConfigMgrRegistrationRequest: ConfigMgrRegistrationRequest allows you to simulate a client using System Center 2012 Configuration Manager Client SDK Basically, this project allows you to create Fake CM12 Clients, ideal when you need test load, reports, etc... when you run the tool (as a local Administrator), it will - Open a csv file and send request to register a new client to sccm - Send a update client id to sccm - Request policy - Send a ddr message - Send hinv more info on my blog at http://wmug.co.uk/w...COSC 320 TWIN System v2.0: Migration of previous version due to one month server limitationCultiv Photometadata for Umbraco: The PhotoMetaData package will extract meta data from images that you upload in your Umbraco media section. Dependency Injection Service Provider (DISP): Dependency Injection Service Provider (DISP) is a wrapper or an interface that aim to allow .NET developers use one of the inversion of control (IoC) containers out there such as StructureMap or Ninject from a high level of abstraction, using the same interface and classes without having to worry about the concrete implementation of each of the IoC containers. DISP provides an interface that will create and instance of an IoC container of your election, and provide generic interface to co...DirectPOS.NET: DirectPOS is a set of classes that bypasses OPOS and other libraries to talk to POS devices directly currently focusing on support for Bixolon, Samsung, and Epson thermal printers and some other devices.Dodongo's Quest: Roguelike in C# and XNAEpicCms: epiccms is only a name. The underlying system consists of two components: an api data service that replicates database tables, views, and procedures directly by url routes; a web interface that is very lightweight and purposed only to directly edit database table data. It is the intention that users will have full control over their data, how it is distributed, who has access, and when or how long anything(anyone) has access to all single pieces of data. It is also the intention that users wi...Find Duplicate file: This application is developed in WPF. you can find duplicate files from the file impression not from file size of from file name. Although this process is very time consuming. You can search and delete the similar file from the application itself. you can also open file location and delete manually from windows explorer. HoleFilling: We present a new image completion algorithm powered by a huge database of photographs gathered from the Web. The algorithm patches up holes in images by finding similar image regions in the database that are not only seamless but also semantically valid. Our chief insight is that while the space of images is effectively infinite, the space of semantically differentiable scenes is actually not that large. For many image completion tasks we are able to find similar scenes which conta...ILCC: A C compiler made in C# that generates .NET CIL code, XML, YAML and .NET PInvokeKendo UI framework for Orchard: This is a common location for kendo UI framework and related script libraries to use with Orchard CMS.MASAS SharePoint: This project is all about creating a SharePoint 2010-based capability to use the Multi-Agency Situational Awareness System (of systems) - MASAS. MASAS is focused on the exchange of structured information. This module is focused on using that information in your SharePoint 2010-based applications. Think of it this way - MASAS is an information bucket. MASAS allows you to share structured information by putting information into the bucket and by pulling information out of the bucket. ...MCP History: History Module for CB websiteMediaWikiSPMigrator: This project is aimed to make it easier to migrate from Mediawiki wiki's into SharePoint. The big differentiator is that it will allow you to map templates into a specific content type in SharePoint. NConf - Advanced Configuration Manager: NConf is an advanced configuration system for .Net projects. It's written out of the need for more advanced configuration than what .Net provides. The key features it supports is multiple configuration sources, simple to use syntax, the ability to reload/update configuration at runtime, and the easy ability to implement custom configuration sources.NMEA Interpreter: NMEA Interpreter is a class library created for one of my projects. It's main function is to parse NMEA sentences into usable easy to read and display data.Occupado: Time management for the School enviroment.OmahaMTG Site: Omaha MTG SiteProject Bloodlust Fury: Group project for CIS 375Radar IoC container: Very simple, fast and easy to use IoC container. Don't have any dependencies on external libraries - just pure .NET 4 Client Profile. Minimal size (~18kB in release build) makes it suitable to use in any project type.Service Request System: Service Request System (SRS) is a lightweight application for submitting and managing Service Requests of any type. The application is written in ASP.net (C#), and can utilize any type of database.Sign In As A Different User: Running your browser (IE) in a corporate environment will give you single sign on to web applications running in your intranet. But in some cases you need to access an URL with different credentials (admin purpose, etc.). Applications like SharePoint will provide you a solution right out of the box, but if this is not available the SignInAsADifferentUser project may help you. We as Glück & Kanja Consulting AG deployed such configurations in relation to Microsoft Lync components. Searching the...SimIn - Simulate Input in Your .NET Applications: SimIn is a light-weight .NET library which allows You to send user input to another applications. You can use SimIn in two modes: simulating user input (SendMessages), or control Your mouse. It supports DirectX input simulation, which means you can send mouse or keyboard messages to any DirectX game you want, and the game will register it correctly. SocialVeris: Este projeto consiste em uma rede social da instituição de ensino Veris IBTA. É um projeto de conclusão do curso de Análise e Desenvolvimento de Sistemas.Sprocket: Web application to management tasks in small company. TheList: A web an mobile application oriented to users that need a support in the creation of the supermarket list.Turntable Enhanced: TT Enhanced is a Turntable.fm Chrome extension used for giving the Turntable.fm website a bit of a face-lift. It adds cosmetic changes to the website, room moderation, drop down lists for easier usability, and much more.Web Part Collector: WebPart collector will help you identify any webpart or all webparts that are located inside your site collection

    Read the article

  • Xml failing to deserialise

    - by Carnotaurus
    I call a method to get my pages [see GetPages(String xmlFullFilePath)]. The FromXElement method is supposed to deserialise the LitePropertyData elements to strongly type LitePropertyData objects. Instead it fails on the following line: return (T)xmlSerializer.Deserialize(memoryStream); and gives the following error: <LitePropertyData xmlns=''> was not expected. What am I doing wrong? I have included the methods that I call and the xml data: public static T FromXElement<T>(this XElement xElement) { using (var memoryStream = new MemoryStream(Encoding.ASCII.GetBytes(xElement.ToString()))) { var xmlSerializer = new XmlSerializer(typeof(T)); return (T)xmlSerializer.Deserialize(memoryStream); } } public static List<LitePageData> GetPages(String xmlFullFilePath) { XDocument document = XDocument.Load(xmlFullFilePath); List<LitePageData> results = (from record in document.Descendants("row") select new LitePageData { Guid = IsValid(record, "Guid") ? record.Element("Guid").Value : null, ParentID = IsValid(record, "ParentID") ? Convert.ToInt32(record.Element("ParentID").Value) : (Int32?)null, Created = Convert.ToDateTime(record.Element("Created").Value), Changed = Convert.ToDateTime(record.Element("Changed").Value), Name = record.Element("Name").Value, ID = Convert.ToInt32(record.Element("ID").Value), LitePageTypeID = IsValid(record, "ParentID") ? Convert.ToInt32(record.Element("ParentID").Value) : (Int32?)null, Html = record.Element("Html").Value, FriendlyName = record.Element("FriendlyName").Value, Properties = record.Element("Properties") != null ? record.Element("Properties").Element("LitePropertyData").FromXElement<List<LitePropertyData>>() : new List<LitePropertyData>() }).ToList(); return results; } Here is the xml: <?xml version="1.0" encoding="utf-8"?> <root> <rows> <row> <ID>1</ID> <ImageUrl></ImageUrl> <Html>Home page</Html> <Created>01-01-2012</Created> <Changed>01-01-2012</Changed> <Name>Home page</Name> <FriendlyName>home-page</FriendlyName> </row> <row xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <Guid>edeaf468-f490-4271-bf4d-be145bc6a1fd</Guid> <ID>8</ID> <Name>Unused</Name> <ParentID>1</ParentID> <Created>2006-03-25T10:57:17</Created> <Changed>2012-07-17T12:24:30.0984747+01:00</Changed> <ChangedBy /> <LitePageTypeID xsi:nil="true" /> <Html> What is the purpose of this option? This option checks the current document for accessibility issues. It uses Bobby to provide details of whether the current web page conforms to W3C's WCAG criteria for web content accessibility. Issues with Bobby and Cynthia Bobby and Cynthia are free services that supposedly allow a user to expose web page accessibility barriers. It is something of a guide but perhaps a blunt instrument. I tested a few of the webpages that I have designed. Sure enough, my pages fall short and for good reason. I am not about to claim that Bobby and Cynthia are useless. Although it is useful and commendable tool, it project appears to be overly ambitious. Nevertheless, let me explain my issues with Bobby and Cynthia: First, certain W3C standards for designing web documents are often too strict and unworkable. For instance, in some versions W3C standards for HTML, certain tags should not include a particular attribute, whereas in others they are requisite if the document is to be ???well-formed???. The standard that a designer chooses is determined usually by the requirements specification document. This specifies which browsers and versions of those browsers that the web page is expected to correctly display. Forcing a hypertext document to conform strictly to a specific W3C standard for HTML is often no simple task. In the worst case, it cannot conform without losing some aesthetics or accessibility functionality. Second, the case of HTML documents is not an isolated case. Standards for XML, XSL, JavaScript, VBScript, are analogous. Therefore, you might imagine the problems when you begin to combine these languages and formats in an HTML document. Third, there is always more than one way to skin a cat. For example, Bobby and Cynthia may flag those IMG tags that do not contain a TITLE attribute. There might be good reason that a web developer chooses not to include the title attribute. The title attribute has a limited numbers of characters and does not support carriage returns. This is a major defect in the design of this tag. In fact, before the TITLE attribute was supported, there was the ALT attribute. Most browsers support both, yet they both perform a similar function. However, both attributes share the same deficiencies. In practice, there are instances where neither attribute would be used. Instead, for example, the developer would write some JavaScript or VBScript to circumvent these deficiencies. The concern is that Bobby and Cynthia would not notice this because it does not ???understand??? what the JavaScript does. </Html> <FriendlyName>unused</FriendlyName> <IsDeleted>false</IsDeleted> <Properties> <LitePropertyData> <Description>Image for the page</Description> <DisplayEditUI>true</DisplayEditUI> <OwnerTab>1</OwnerTab> <DisplayName>Image Url</DisplayName> <FieldOrder>1</FieldOrder> <IsRequired>false</IsRequired> <Name>ImageUrl</Name> <IsModified>false</IsModified> <ParentPageID>3</ParentPageID> <Type>String</Type> <Value xsi:type="xsd:string">smarter.jpg</Value> </LitePropertyData> <LitePropertyData> <Description>WebItemApplicationEnum</Description> <DisplayEditUI>true</DisplayEditUI> <OwnerTab>1</OwnerTab> <DisplayName>WebItemApplicationEnum</DisplayName> <FieldOrder>1</FieldOrder> <IsRequired>false</IsRequired> <Name>WebItemApplicationEnum</Name> <IsModified>false</IsModified> <ParentPageID>3</ParentPageID> <Type>Number</Type> <Value xsi:type="xsd:string">1</Value> </LitePropertyData> </Properties> <Seo> <Author>Phil Carney</Author> <Classification /> <Copyright>Carnotaurus</Copyright> <Description> What is the purpose of this option? This option checks the current document for accessibility issues. It uses Bobby to provide details of whether the current web page conforms to W3C's WCAG criteria for web content accessibility. Issues with Bobby and Cynthia Bobby and Cynthia are free services that supposedly allow a user to expose web page accessibility barriers. It is something of a guide but perhaps a blunt instrument. I tested a few of the webpages that I have designed. Sure enough, my pages fall short and for good reason. I am not about to claim that Bobby and Cynthia are useless. Although it is useful and commendable tool, it project appears to be overly ambitious. Nevertheless, let me explain my issues with Bobby and Cynthia: First, certain W3C standards for designing web documents are often too strict and unworkable. For instance, in some versions W3C standards for HTML, certain tags should not include a particular attribute, whereas in others they are requisite if the document is to be ???well-formed???. The standard that a designer chooses is determined usually by the requirements specification document. This specifies which browsers and versions of those browsers that the web page is expected to correctly display. Forcing a hypertext document to conform strictly to a specific W3C standard for HTML is often no simple task. In the worst case, it cannot conform without losing some aesthetics or accessibility functionality. Second, the case of HTML documents is not an isolated case. Standards for XML, XSL, JavaScript, VBScript, are analogous. Therefore, you might imagine the problems when you begin to combine these languages and formats in an HTML document. Third, there is always more than one way to skin a cat. For example, Bobby and Cynthia may flag those IMG tags that do not contain a TITLE attribute. There might be good reason that a web developer chooses not to include the title attribute. The title attribute has a limited numbers of characters and does not support carriage returns. This is a major defect in the design of this tag. In fact, before the TITLE attribute was supported, there was the ALT attribute. Most browsers support both, yet they both perform a similar function. However, both attributes share the same deficiencies. In practice, there are instances where neither attribute would be used. Instead, for example, the developer would write some JavaScript or VBScript to circumvent these deficiencies. The concern is that Bobby and Cynthia would not notice this because it does not ???understand??? what the JavaScript does. </Description> <Keywords>unused</Keywords> <Title>unused</Title> </Seo> </row> </rows> </root> EDIT Here are my entities: public class LitePropertyData { public virtual string Description { get; set; } public virtual bool DisplayEditUI { get; set; } public int OwnerTab { get; set; } public virtual string DisplayName { get; set; } public int FieldOrder { get; set; } public bool IsRequired { get; set; } public string Name { get; set; } public virtual bool IsModified { get; set; } public virtual int ParentPageID { get; set; } public LiteDataType Type { get; set; } public object Value { get; set; } } [Serializable] public class LitePageData { public String Guid { get; set; } public Int32 ID { get; set; } public String Name { get; set; } public Int32? ParentID { get; set; } public DateTime Created { get; set; } public String CreatedBy { get; set; } public DateTime Changed { get; set; } public String ChangedBy { get; set; } public Int32? LitePageTypeID { get; set; } public String Html { get; set; } public String FriendlyName { get; set; } public Boolean IsDeleted { get; set; } public List<LitePropertyData> Properties { get; set; } public LiteSeoPageData Seo { get; set; } /// <summary> /// Saves the specified XML full file path. /// </summary> /// <param name="xmlFullFilePath">The XML full file path.</param> public void Save(String xmlFullFilePath) { XDocument doc = XDocument.Load(xmlFullFilePath); XElement demoNode = this.ToXElement<LitePageData>(); demoNode.Name = "row"; doc.Descendants("rows").Single().Add(demoNode); doc.Save(xmlFullFilePath); } }

    Read the article

  • Fortigate Remote VPN : no matching gateway for new request

    - by Kedare
    I am trying to configure a Fortigate 60C to act as an IPSec endpoint for remote VPN. I configured it like this : SCR-F0-FGT100C-1 # diagnose vpn ike config vd: root/0 name: SCR-REMOTEVPN serial: 7 version: 1 type: dynamic mode: aggressive dpd: enable retry-count 3 interval 5000ms auth: psk dhgrp: 2 xauth: server-auto xauth-group: VPN-group interface: wan1 distance: 1 priority: 0 phase2s: SCR-REMOTEVPN-PH2 proto 0 src 0.0.0.0/0.0.0.0:0 dst 0.0.0.0/0.0.0.0:0 dhgrp 5 replay keep-alive dhcp policies: none Here is the configuration: config vpn ipsec phase1-interface edit "SCR-REMOTEVPN" set type dynamic set interface "wan1" set dhgrp 2 set xauthtype auto set mode aggressive set proposal aes256-sha1 aes256-md5 set authusrgrp "VPN-group" set psksecret ENC xxx next config vpn ipsec phase2-interface edit "SCR-REMOTEVPN-PH2" set keepalive enable set phase1name "SCR-REMOTEVPN" set proposal aes256-sha1 aes256-md5 set dhcp-ipsec enable next end But when I try to connect from a remote device (I tested with an Android Phone), the phone fail to connect and the fortinet return this error : 2012-07-20 13:08:51 log_id=0101037124 type=event subtype=ipsec pri=error vd="root" msg="IPsec phase 1 error" action="negotiate" rem_ip=xxx loc_ip=xxx rem_port=1049 loc_port=500 out_intf="wan1" cookies="xxx" user="N/A" group="N/A" xauth_user="N/A" xauth_group="N/A" vpn_tunnel="N/A" status=negotiate_error error_reason=no matching gateway for new request peer_notif=INITIAL-CONTACT I tried searching on the web, but i did not find anything revelant to this. Do you have any idea of what can be the problem ? I tried many combinaisons of settings on the fortigate without success..

    Read the article

  • ADSL with RFC 2684 Bridging

    - by Axel Isouard
    My new ADSL line is now enabled, I can finally use my Netgear DM111Pv2 to use to the Internet. My ISP has told me a big surprise : I don't need to use a login and a password to connect to the Internet, then I must use the RFC 2684 bridging mode. It works pretty fine on the ADSL modem's side, but I've spent one night trying to figure out how to connect to the Internet through this modem. I only have a Fonera 2.0n and a computer running Gentoo Linux. I've been trying to use the br2684ctl utility with brctl on my Gentoo, first I've configured my kernel in that way : CONFIG_PPP=y CONFIG_PPP_BSDCOMP=y CONFIG_PPP_DEFLATE=y # CONFIG_PPP_FILTER is not set CONFIG_PPP_MPPE=y # CONFIG_PPP_MULTILINK is not set CONFIG_PPPOATM=y CONFIG_PPPOE=y CONFIG_PPP_ASYNC=y CONFIG_PPP_SYNC_TTY=y [...] CONFIG_ATM=y CONFIG_ATM_CLIP=y CONFIG_ATM_CLIP_NO_ICMP=y CONFIG_ATM_LANE=y CONFIG_ATM_MPOA=y CONFIG_ATM_BR2684=y # CONFIG_ATM_BR2684_IPFILTER is not set And I still get these messages : cirus nais # br2684ctl -b -c 0 -e 0 -a 8.35 br2684ctl[8041]: Interface "nas0" created sucessfully br2684ctl[8041]: Communicating over ATM 0.8.35, encapsulation: LLC br2684ctl[8041]: Fatal: failed to connect on socket; No such device The brctl utility keeps telling me "Invalid argument" each time I try to add the nas0 interface into my bridge, I'm honestly hoping I'm doing wrong. I've been following this README carefully and this tutorial on setting up a PPPoE connection with Gentoo, but the PPPoE interface just tries to start, and nothing special related to PPP happens, I can't see the interface when I do ifconfig. So, I'm asking you if there's something huge I've been missing since the beginning ! Maybe I should wait to buy a new router fully supporting the RFC2684 bridging mode, but I'm more interested in setting up this mode on my Fonera 2.0n and even my Raspberry Pi !

    Read the article

  • Cannot access host from a virtualbox guest using bridged adapter

    - by David Dai
    I have a windows 7 host with firewall turned off. And I have a windowsXP guest running on Virtualbox 4.2.4r81684. In my windowsXP guest I tried to connect to the FTP server on my host machine(which used to work well) but it didn't work. I tried to ping my host machine, but it didn't work either. Then I tried to ping my guest from host, it worked well. my guest ip is :192.168.1.95 my host ip is : 192.168.1.9 route table on guest machine is this: C:\Documents and Settings\wenlong>route PRINT =========================================================================== Interface List 0x1 ........................... MS TCP Loopback interface 0x2 ...08 00 27 66 54 6c ...... AMD PCNET Family PCI Ethernet Adapter #2 - Packe t Scheduler Miniport =========================================================================== =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.95 20 127.0.0.0 255.0.0.0 127.0.0.1 127.0.0.1 1 192.168.1.0 255.255.255.0 192.168.1.95 192.168.1.95 20 192.168.1.95 255.255.255.255 127.0.0.1 127.0.0.1 20 192.168.1.255 255.255.255.255 192.168.1.95 192.168.1.95 20 224.0.0.0 240.0.0.0 192.168.1.95 192.168.1.95 20 255.255.255.255 255.255.255.255 192.168.1.95 192.168.1.95 1 Default Gateway: 192.168.1.1 =========================================================================== Persistent Routes: None arp cache is this: C:\Documents and Settings\wenlong>arp -a Interface: 192.168.1.95 --- 0x2 Internet Address Physical Address Type 192.168.1.1 00-26-f2-60-3c-04 dynamic 192.168.1.9 90-e6-ba-c2-90-2f dynamic It's strange because there was no problem days before and I didn't make any changes to the setting. could anybody help? PS. the guest can communicate with other machines in the LAN(for example 192.168.1.114) ok. it just cannot connect to the host machine.

    Read the article

  • Allow access from outside network with dmz and iptables

    - by Ivan
    I'm having a problem with my home network. So my setup is like this: In my Router (using Ubuntu desktop v11.04), I installed squid proxy as my transparent proxy. So I would like to use dyndns to my home network so I could be access my server from the internet, and also I installed CCTV camera and I would like to enable watching it from internet. The problem is I cannot access it from outside the net. I already set DMZ in my modem to my router ip. My first guess is because i'm using iptables to redirect all inside network to use squid. And not allow from outside traffic to my inside network. Here is my iptables script: #!/bin/sh # squid server IP SQUID_SERVER="192.168.5.1" # Interface connected to Internet INTERNET="eth0" # Interface connected to LAN LAN_IN="eth1" # Squid port SQUID_PORT="3128" # Clean old firewall iptables -F iptables -X iptables -t nat -F iptables -t nat -X iptables -t mangle -F iptables -t mangle -X # Load IPTABLES modules for NAT and IP conntrack support modprobe ip_conntrack modprobe ip_conntrack_ftp # For win xp ftp client #modprobe ip_nat_ftp echo 1 > /proc/sys/net/ipv4/ip_forward # Setting default filter policy iptables -P INPUT DROP iptables -P OUTPUT ACCEPT # Unlimited access to loop back iptables -A INPUT -i lo -j ACCEPT iptables -A OUTPUT -o lo -j ACCEPT # Allow UDP, DNS and Passive FTP iptables -A INPUT -i $INTERNET -m state --state ESTABLISHED,RELATED -j ACCEPT # set this system as a router for Rest of LAN iptables --table nat --append POSTROUTING --out-interface $INTERNET -j MASQUERADE iptables --append FORWARD --in-interface $LAN_IN -j ACCEPT # unlimited access to LAN iptables -A INPUT -i $LAN_IN -j ACCEPT iptables -A OUTPUT -o $LAN_IN -j ACCEPT # DNAT port 80 request comming from LAN systems to squid 3128 ($SQUID_PORT) aka transparent proxy iptables -t nat -A PREROUTING -i $LAN_IN -p tcp --dport 80 -j DNAT --to $SQUID_SERVER:$SQUID_PORT # if it is same system iptables -t nat -A PREROUTING -i $INTERNET -p tcp --dport 80 -j REDIRECT --to-port $SQUID_PORT # DROP everything and Log it iptables -A INPUT -j LOG iptables -A INPUT -j DROP If you know where did I miss, please advice me. Thanks for all your help and I really appreciate it.

    Read the article

  • Delay NTP Initialisation, Cisco 877W, IOS 12.4(24)T1

    - by Mike Insch
    I have a Cisco 877W which I'm using for my home ADSL connection (and as a refresher in Cisco IOS). I've got a working config in-place with my PPPoA connection coming online correctly, and VLANs and other settings configured as I want them, but I can't crack the NTP configuration. For NTP, I have the following defined ntp server 0.uk.pool.ntp.org source Dialer0 ntp server 1.uk.pool.ntp.org source Dialer0 ntp server 2.uk.pool.ntp.org source Dialer0 ntp server 3.uk.pool.ntp.org source Dialer0 This setup works fine when issued in Global Configuration Mode when the Dialer0 interface (ATM0.1) is up. The configuration fails at startup though: Translating "1.uk.pool.ntp.org"...domain server (208.67.222.222) (208.67.220.220) ntp server 1.uk.pool.ntp.org source Dialer0 ^ % Invalid input detected at "^" marker. This is repeated for the other servers defined. Obviously the DNS lookup for the server(s) fails because the DNS servers cannot be accessed because the external interface is not yet online. Is there a way to delay the NTP configuration until afte the Dialer0 interface is fully initialised? Can the NTP commands be triggered by the Line Protocol on the Dialer0 interface transitioning to the up state? Alternatively, can the NTP commands be delayed for 5 minutes after the router has finished initialising? Any advice, or pointers to useful documentation or examples gratefully received ...

    Read the article

  • Something very strange with network

    - by Rodnower
    Hello, I have Windows 7 and I have very strange thing with my network. Some time I was connected through wireless router and my IP was 192.168.2.103, router's IP was 192.168.2.1 and some other IP was 192.168.2.100. The last I get from page "active DHCP clients" of web interface of the router and from "wireless clients" I may to see that 192.168.2.100 not (!) belong to my MAC address. Router build by EDimax. So after that I disabled wireless function of the router and restarted it. In this time I had not ping to 192.168.2.1. Also I had not any other connection, not wireless nor cable, but (!) I still had ping to 192.168.2.100 and I not understand what this voodoo is... C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Reply from 192.168.2.100: bytes=32 time<1ms TTL=128 Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms This is what I had: C:\Users\Andrey>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Andrey-PC Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection 3: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Virtual WiFi Miniport Adapter #2 Physical Address. . . . . . . . . : 06-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Wireless LAN adapter Wireless Network Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Gigabyte GN-WS50G (mini) PCI-E WLAN Card Physical Address. . . . . . . . . : 00-1D-7D-40-61-EB DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 00-1B-24-B6-09-91 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes C:\Users\Andrey>arp -a -v Interface: 127.0.0.1 --- 0x1 Internet Address Physical Address Type 224.0.0.22 static 239.255.255.250 static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-d2-8c-af invalid 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 192.168.2.1 00-0e-2e-ff-f1-f6 dynamic 192.168.2.101 00-27-19-bc-8b-9c dynamic 192.168.2.102 00-16-e6-6c-ae-d4 dynamic 192.168.2.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Interface: 0.0.0.0 --- 0xffffffff Internet Address Physical Address Type 224.0.0.22 01-00-5e-00-00-16 static 255.255.255.255 ff-ff-ff-ff-ff-ff static C:\Users\Andrey>route print =========================================================================== Interface List 14...06 1d 7d 40 61 eb ......Microsoft Virtual WiFi Miniport Adapter #2 13...00 1d 7d 40 61 eb ......Gigabyte GN-WS50G (mini) PCI-E WLAN Card 11...00 1b 24 b6 09 91 ......Marvell Yukon 88E8055 PCI-E Gigabit Ethernet Controller 1...........................Software Loopback Interface 1 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 1 306 ::1/128 On-link 1 306 ff00::/8 On-link =========================================================================== Persistent Routes: None Only after reboot I lost ping to there: C:\Users\Andrey>ping 192.168.2.100 Pinging 192.168.2.100 with 32 bytes of data: PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. PING: transmit failed. General failure. Ping statistics for 192.168.2.100: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), So what this mysterious cache is? Thank you for ahead.

    Read the article

  • KVM guest VLAN aware problems

    - by baraka
    Hi, We are using Centos 5.5. as KVM host. It has two nics. One for management and the other one for services. As we have services in multiple vlans this nic is configured as a 802.1Q trunk. Any VM must be able to have access to any vlan, so host trunk interface is bridged to its tap interface and vlan is configured inside VM. Everything works fine while there is not heavy traffic. I can not find any log on guest or host, but, after some certain sustained big file transfer (about 6Gb) bridging stop working. Other guest on the same host continue working without problems. tcpdump on bridge interface is Ok, but on guest tap inferface I can see only outgoing traffic. Restarting bridge or rejoining tap interface doesn't provide any clue. Rebooting guest turns on bridge again. Bridge configuration is minimal: just addbr and addif (no stp). Any idea welcome!

    Read the article

  • Disable IPv6 on Debian VPS (Virtuozzo!)

    - by chris_l
    I have a Debian Lenny VPS, that's running virtualized by Parallels/Virtuozzo. Currently, the network interface doesn't have an IPv6 address - and that's good, because I don't have an ip6tables configuration. But I assume, that I could wake up one day, and ifconfig will show me an ipv6 address for the interface - because I have no control over the kernel or its modules - they're under the control of the hosting company. That would leave the server completely vulnerable to attacks from IPv6 addresses. What would be the best way to disable IPv6 (for the interface or maybe for the entire host)? Usually I would simply disable the kernel module, but that's not possible in this case. Update Maybe I should add, that I can use iptables and everything normally (I'm root on the VPS), but I can't make changes to the kernel or load kernel modules because of the way Virtuozzo works (shared kernel). lsmod always returns nothing. I can't call ip6tables -L (it says that I need to insmod, or that the kernel would have to be upgraded). I don't think, that changes to /etc/modprobe.d/aliases would have any effect, or do they? Networking Config? I thought, that maybe I can turn IPv6 off from /etc/network/... Is that possible? I just see, that they've set up avahi, so I should probably change the setting use-ipv6=yes to "no" in /etc/avahi/avahi.conf (?) Has anybody already tried this solution, and can I rely on it? I don't know too much about avahi. Would it actually have any effect? Or could it even bring my entire interface down, once IPv6 is enabled by the kernel?

    Read the article

  • NETKEY IPsec and ARP

    - by Shawn J. Goff
    I'm wondering if I have the correct routing setup for an IPsec tunnel. I have control over the IPsec endpoints and the hosts connected to one side. These hosts are connecting to the tunnel so that they have access to the network on the other side of what I will call the IPsec server. I don't have control of the network upstream of this server. Normally, the IPsec server will not respond to ARP requests for the hosts on the other side of the tunnel. So when a packet arrives for one of my hosts the server gets ARP requests, but the upstream router gets no response, and cannot construct the ethernet frame to send me the packets. If I was using one of the swan stacks, I would have a separate interface, and I'd probably just need to turn on proxyarp, but I'm using NETKEY, which doesn't use a separate interface for the tunnel. To solve the problem for now, I have added an eth0.5 vlan to the IPsec server, turned on proxyarp for that interface, and added all routes my hosts addresses to that interface so that it will respond to those ARP requests (and will therefore get relevant packets routed to it). This works, but it feels wrong. What is the correct way to get the upstream router to send me the traffic for these hosts?

    Read the article

  • Using radvd to advertise ipv6 over VPN connection using DD-wrt

    - by Sean Madden
    My ultimate goal is to allow VPN users to have access to my internal IPv6 network from across the intertubes. I've got a linksys WRT54GSv2 running DD-WRTv24SP1 and have configured the little guy as specified here http://www.dd-wrt.com/wiki/index.php/IPv6 and it works wonderfully over the br0 interface (LAN/WLAN bridge). Here's the issue though, when I add an additional interface to the radvd config file on the router (specifically ppp0, for the VPN traffic), radvd refuses to start. The kicker is that on DDWRT, it doesn't give an error message, it just fails outright. Any suggestions on where to proceed from here? /jffs/radvd.conf: interface br0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; interface ppp0 { AdvSendAdvert on; prefix 0:0:0:1::/64 { AdvOnLink on; AdvAutonomous on; }; }; The documentation I've found for radvd is slim, but if anyone has a decent idea on how to proceed I'd love to hear it.

    Read the article

  • "Password Server: Stopped" on Mac OS Lion Server. Stops with error -1 during startup

    - by V1ru8
    Since I've restored the Open Directory from an archive because my Server crashed and the DB was corrupt. The password server does not start anymore. The log looks like this: Feb 14 2012 21:41:20 156746us Mac OS X Password Service version 376.1 (pid = 2438) was started at: Tue Feb 14 21:41:20 2012. Feb 14 2012 21:41:20 156801us RunAppThread Created Feb 14 2012 21:41:20 156852us RunAppThread Started Feb 14 2012 21:41:20 156879us Initializing Server Globals ... Feb 14 2012 21:41:20 163094us Initializing Networking ... Feb 14 2012 21:41:20 163196us Initializing TCP ... Feb 14 2012 21:41:20 191790us SASL is using realm "SERVER.HOME.POST-NET.CH" Feb 14 2012 21:41:20 191847us Starting Central Thread ... Feb 14 2012 21:41:20 191860us Starting other server processes ... Feb 14 2012 21:41:20 191873us StartCentralThreads: 1 threads to stop Feb 14 2012 21:41:20 191905us Initializing TCP ... Feb 14 2012 21:41:20 191954us Starting TCP/IP Listener on ethernet interface, port 106 Feb 14 2012 21:41:20 192012us Starting TCP/IP Listener on ethernet interface, port 3659 Feb 14 2012 21:41:20 192048us Starting TCP/IP Listener on interface lo0, port 106 Feb 14 2012 21:41:20 192082us Starting TCP/IP Listener on interface lo0, port 3659 Feb 14 2012 21:41:20 192117us StartCentralThreads: Created 4 TCP/IP Connection Listeners Feb 14 2012 21:41:20 192132us Starting UNIX domain socket listener /var/run/passwordserver Feb 14 2012 21:41:20 193034us CRunAppThread::StartUp: caught error -1. Feb 14 2012 21:41:20 193056us ** ERROR: The Server received an error during startup. See error log for details. Feb 14 2012 21:41:20 193075us RunAppThread::StartUp() returned: 4294967295 Feb 14 2012 21:41:20 193107us Stopping server processes ... Feb 14 2012 21:41:20 193119us Stopping Network Processes ... Feb 14 2012 21:41:20 193131us Deinitializing networking ... Feb 14 2012 21:41:20 193149us Server Processes Stopped ... Feb 14 2012 21:41:20 193165us RunAppThread Stopped Feb 14 2012 21:41:20 193202us Aborting Password Service. See error log. The error log repeats the following: Feb 14 2012 21:41:50 409022us Server received error -1 during startup. Feb 14 2012 21:41:50 409141us Aborting Password Service. Anyone an idea what's wrong here and how I can fix this?

    Read the article

  • ospfd over an OpenVPN link - strange error in logs

    - by Alex
    I am trying to set up Quagga ospfd on two hosts connected by an OpenVPN link. These hosts have VPN IPs 10.31.0.1 and 10.31.0.13. ospfd config is pretty simple: hostname bizon password xxxxxxxxx enable password xxxxxxxxx ! log file /var/log/quagga/ospfd.log ! interface lo ! interface tun0 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun1 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 interface tun2 ip ospf network point-to-point ip ospf mtu-ignore ip ospf cost 10 ! router ospf ospf router-id 10.31.0.1 network 10.31.0.0/16 area 0.0.0.0 network 10.119.2.0/24 area 0.0.0.0 redistribute connected area 0.0.0.0 range 10.0.0.0/8 ! line vty ! debug ospf event debug ospf packet all I am getting the following error in the ospfd.log (the log is from 10.31.0.13): 2012/10/05 01:25:28 OSPF: ip_v 4 2012/10/05 01:25:28 OSPF: ip_hl 5 2012/10/05 01:25:28 OSPF: ip_tos 192 2012/10/05 01:25:28 OSPF: ip_len 64 2012/10/05 01:25:28 OSPF: ip_id 64666 2012/10/05 01:25:28 OSPF: ip_off 0 2012/10/05 01:25:28 OSPF: ip_ttl 1 2012/10/05 01:25:28 OSPF: ip_p 89 2012/10/05 01:25:28 OSPF: ip_sum 0xe5d1 2012/10/05 01:25:28 OSPF: ip_src 10.31.0.1 2012/10/05 01:25:28 OSPF: ip_dst 224.0.0.5 2012/10/05 01:25:28 OSPF: Packet from [10.31.0.1] received on link tun1 but no ospf_interface I'm not sure what to do next. I have set up ospfd over OpenVPN several times but I used Debian and I am on CentOS 6 now. Quagga version is 0.99.15. Should I try to get more recent version?

    Read the article

  • Decyphering Seagate drive model numbers?

    - by Stefan Lasiewski
    I'm comparing Seagate's Enterprise and Desktop drives for a variety of old and new servers. These servers come from different generations, so options like size (73GB, 2TB) and interface (SATA vs SAS 3.0Gbps vs SAS 6Gbps vs SCSI Ultra320) are widely variable. I'm trying to compare the sizes, speeds and interfaces, but I'm getting thrown off by different models. Also, their website is not the best. Does anyone know of a documented explanation of the Seagate model numbers? And is there a single spreadsheet which compares the features for all drives (or all 'Enterprise' drives?). Seagate drives have model numbers like this: Model ST3600057SS 6-Gb/s SAS 600 GB None at Cheetah® 15K Hard Drives Model ST373455LW Ultra320 SCSI 73.4 GB 68-Pin LW at Cheetah® 15K Hard Drives Model ST32000644NS SATA 3Gb/s 2 TB None at Constellation™ ES Hard Drives Model ST973452SS 6-Gb/s SAS 73 GB None Savvio® 15K Hard Drives Model ST9200011FS SATA 3Gb/s 200 GB Pulsar™ Solid State Drives I understand the model numbers read something like this: ST - SOMETHING1 - SIZE - SOMETHING2 - INTERFACE Where the fields mean something like this: ST : For 'Seagate'? 'Seagate Technoligies'? SOMETHING1 - This field has number, but I'm not sure what that represents. SIZE - Size in Gigabytes. This is a number like '73' or '300' or '2000' SOMETHING2 - This field also has a number, but I'm not sure what it means. INTERFACE - This field seems to indicate the Interface. 'SS' means SAS, 'FC' means Fibre Channel, but I don't see how to distinguish between 6Gbps SAS and 3Gbps SAS, or different SATA or FC speeds. I don't see a field which indicates the RPM (15K , 10K, 7.2K) etc. Is this part of the model number?

    Read the article

< Previous Page | 184 185 186 187 188 189 190 191 192 193 194 195  | Next Page >