Search Results

Search found 516 results on 21 pages for 'suspend'.

Page 19/21 | < Previous Page | 15 16 17 18 19 20 21  | Next Page >

• running a laptop continuously

  - by intuited

  I have an experienced laptop — a Dell Latitude D400, with a Pentium M CPU — that I'd like to run as an always-on server. This model was launched in 2004; I got mine second-hand in about 2007. I've heard that continuous operation is generally not a good idea with consumer hardware, but am lacking in specific knowledge about related problems, and have little idea of how much such usage patterns would reduce the lifespan of the machine. I'm mostly concerned with the unit's core components; parts such as the hard drive which are readily replaceable are, well, readily replaceable. What sorts of things can I do to increase the lifespan of this machine under such circumstances? For example, I'm guessing that it would be wise to limit the CPU frequency or take other steps to keep the internal temperature low. However, I'm not sure where the point of diminishing returns would lie with such an approach — 50°C? 40°C? Would it be useful to suspend the machine periodically, for perhaps an hour each day, or a few hours each week?

  Read the article

• Input/output error reading USB backup drive on CentOS 6.4

  - by Kev

  I'm suddenly seeing some strange behaviour on our USB backup drive that doesn't make sense to me: (2013-10-21 14:58:23 [root@newdc /]$ cd /mnt/backup/ (2013-10-21 14:59:03 [root@newdc backup]$ ls -la ls: reading directory .: Input/output error total 0 (2013-10-21 14:59:05 [root@newdc backup]$ df -h /mnt/backup Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 843G 28G 97% /mnt/backup How is it possible for the OS to know how much is in use, but I can't ls any of it as root? Or more to the point, what problem does this indicate? /var/log/messages said this: Oct 21 14:57:54 g5 kernel: EXT4-fs error (device sda1): ext4_journal_start_sb: Detected aborted journal Oct 21 14:57:54 g5 kernel: EXT4-fs (sda1): Remounting filesystem read-only But...read-only is something different than 'throw an io error'... After unmounting to try fsck on it, I had someone on-site look at it, and the drive was not spun up, and had a slow-flashing light, which I believe means it was in a power-suspend mode. So I had them unplug and replug the USB cable, and now (before remounting) it says: fsck from util-linux-ng 2.17.2 e2fsck 1.41.12 (17-May-2010) /dev/sda1: clean, 2805106/61046784 files, 181934167/244182016 blocks I then mount it and now ls works and df reports: Filesystem Size Used Avail Use% Mounted on /dev/sda1 917G 680G 191G 79% /mnt/backup What would cause it to go into such a state without being asked to? Why all the weird behaviour, and now it appears to not be corrupt?

  Read the article

• Solaris OpenStack Horizon customizations

  - by GirishMoodalbail-Oracle

  In Oracle Solaris OpenStack Havana, we have customized the Horizon BUI by modifying existing dashboard and panels to reflect only those features that we support. The modification mostly involves:  --  disabling an widget (checkbox, button, textarea, and so on) --  removal of a tab from a panel --  removal of options from pull-down menus The following table lists the customizations that we have made. |-----------------------------+-----------------------------------------------------| | Where                       | What                                                | |-----------------------------+-----------------------------------------------------| | Project => Instances =>     | Post-Creation tab is removed.                       | | Launch Instance             |                                                     | |                             |                                                     | | Project => Instances =>     | Security Groups tab is removed.                     | | Actions => Edit Instance    |                                                     | |                             |                                                     | | Project => Instances =>     | Console tab is removed.                             | | Instance Name               |                                                     | |                             |                                                     | | Project => Instances =>     | Following actions Console, Edit Security Groups,    | | Actions                     | Pause Instance, Suspend Instance, Resize Instance,  | |                             | Rebuild Instance, and Migrate Instance are removed. | |                             |                                                     | | Project =>                  | Security Groups tab is removed.                     | | Access and Security         |                                                     | |                             |                                                     | | Project =>                  | Create Volume action is removed.                    | | Images and Snapshots =>     |                                                     | | Images => Actions           |                                                     | |                             |                                                     | | Project => Networks =>      | Admin State is disabled and its value is always     | | Create Network              | true.                                               | |                             |                                                     | | Project => Networks =>      | Disable Gateway checkbox is disabled, and its       | | Create Network =>           | value is always false.                              | | Subnet                      |                                                     | |                             |                                                     | | Project => Networks =>      | Allocation Pools and Host Routes text area are      | | Create Network =>           | disabled.                                      | | Subnet Detail               |                                                     | |                             |                                                     | | Project => Networks =>      | Edit Subnet action is removed.                      | | Network Name => Subnet =>   |                                                     | | Actions                     |                                                     | |                             |                                                     | | Project => Networks =>      | Edit Port action is removed.                        | | Network Name => Ports =>    |                                                     | | Actions                     |                                                     | |                             |                                                     | | Admin => Instnaces =>       | Following actions Console, Pause Instance,          | | Actions                     | Suspend Instance, and Migrate Instance are removed. | |                             |                                                     | | Admin => Networks =>        | Edit Network action is removed                      | | Actions                     |                                                     | |                             |                                                     | | Admin => Networks =>         | Edit Subnet action is removed                       | | Subnets => Actions          |                                                     | |                             |                                                     | | Admin => Networks =>         | Edit Port action is removed                         | | Ports => Actions            |                                                     | |                             |                                                     | | Admin => Networks =>         | Admin State and Shared check box are disabled.      | | Create Network              | Network's Admin State is always true, and Shared is | |                             | always false.                                       | |                             |                                                     | | Admin => Networks =>        | Admin State check box is disabled and its value     | | Network Name => Create Port | is always true.                                     | |-----------------------------+-----------------------------------------------------|

  Read the article

• C# web cam WM_CAP_CONNECT: Want to force a capture source when multiple capture sources present.

  - by Codejoy

  I am using WebCam_Capture code I found online to access through C# a web cam. On a computer with one video source it works like a charm! (Program starts up at start up, finds the webcam and it works). Though on a computer with many video sources (Say a web cam and then manycam running on top of that), the program starts and queries the user which source to use. I would love my program to start up autonomously at the restart of a machine so this waiting for user input throws a wrench in that, anyway I can force it to just select say the first found source and go with that? So i have some webcam code I yes indeed found online here: http://channel9.msdn.com/forums/TechOff/93476-Programatically-Using-A-Webcam-In-C/?CommentID=94149 and now in preparing this post I did do more research and found out that my issue lies in this line from the above code: SendMessage(mCapHwnd, WM_CAP_CONNECT, 0, 0); That is what connects the webcam up, the only issue is that the above brings up this annoying video source dialog if I have more than one source. I want it to just use the first source so that dialog doesn't come up. I tried passing in different values where the 0's are, sure enough the dialog doesn't come up but it doesn't work either. Anyone know if there is a value I can pass to the SendMessage to suspend the dialog and yet have it select the first video source it finds?

  Read the article

• What are the reasons to use dos batch programs in Windows?

  - by DVK

  Question What would be a good (ideally, technical) reason to ever program some non-trivial task in dos batch language on a modern Windows system as opposed to downloading either PowerShell, or ActiveState Perl? To be more specific, I make the following two assumptions for the duration of this question: anyone technical enough to be able to write a medium-complexity batch script is technical enough to install either of the scripting interpreters. Neither of those two present enough of a learning curve for basic batch replacement tasks that said curve would outweigh the pain of doing any remotely-non-trivial task in batch. Notes "You need a batch program for autoexec.bat" is not a valid reason. Your autoexec.bat may consist of simply calling non-batch script. If you disagree with either of my 2 assumptions above, that's fine, and I may be wrong. But my question is specifically "assuming those 2 assumptions are correct, what would be the reason to still stick with batch?" If it makes it easier to suspend disbelief (in case you disagree with me), add in a 3rd assumption that the question is limited to people who already posess at least some modicum of PowerShell or Perl experience. To re-iterate - this is not meant to be a subjective question about how easy it is to learn PSh or ASPerl compared to doing advanced batch coding. That is a separate question that is too subjective to be bothered with in this post. Background: I used to do some fairly complicated batch programming back in the elder days, and remember batch as one of the worst possble programming languages I had encountered. The idea for this question came after seeing a bunch of batch questions on SO, and trying to grok the answer of one of them out of sheer curiosity and giving up in pain after a minute, exclaiming mentally "why would anyone go through this pain instead of doing that in 1 line of Perl?" :) My own plausible answer I assume there may be an an likely DOS-compatible system, which has DOS interpreter but has no compatible PowerShell or Perl... I'm not aware of one but not completely impossible.

  Read the article

• Debugging Cactus Tests in Eclipse

  - by Th3sandm4n

  Side note: This is inherited code, I didn't do any of the setup and am new to the project. I'm trying to set up remote debugging in Eclipse for these unit tests that use Cactus. I've read around a bit (but I can't seem to find any REAL information how to set this up). Closest I've found is here (http://www.eclipse.org/webtools/community/tutorials/CactusInWTP/CactusInWTP.html), but it just says to Debug - Debug on Server, but nowhere does it say where the debug port is set or anything, and I can't find anything on how to enable this, set it. Just asking to see if anyone has set this up before, it would really help stepping through the code rather than just logging. The plugin (http://jakarta.apache.org/cactus/integration/eclipse/runner_plugin.html) Looks promising, but I also don't even know where to download it, it doesn't link to a location -.- The project uses ant, cactus, and I'm using Eclipse. Thanks EDIT Here is the target I'm using <junit fork="no" forkmode="perTest" printsummary="yes" haltonfailure="no" haltonerror="no" failureproperty="tests.failed"> <jvmarg value="-Xdebug" /> <jvmarg value="-Xrunjdwp:transport=dt_socket,address=localhost:8005,server=y,suspend=y" /> <formatter type="xml" usefile="true" /> <formatter type="plain" usefile="false" /> <classpath> <pathelement location="${clover.jar}"/> <path refid="cactus.classpath.id" /> <pathelement location="../ejb/src" /> </classpath> <sysproperty key="cactus.contextURL" value="${cactus.contextURL}"/> <test name="com.test.AllTests" outfile="TESTS" /> </junit>

  Read the article

• Cocos2D Director Pause/Resume Issue

  - by Aditya

  I am trying to play a .gif animation in cocos2D. For this i am using the library glgif. Now, to display the animation i am pausing the Director, adding a subview to show the animation and after the animation is done i am resuming the Director. However, I am not able to resume the state of the Director and it shows blank. So I tried this without pausing and resuming this Director and it still did not work.I also tried detaching the director before tha animation and adding it back afterwards and even that did not work. So is there a way to pause/suspend the Director in the application and properly restore is back? Thanks. Code sample: [[Director sharedDirector] pause]; [[Director sharedDirector] detach]; AppDelegate *del = [[UIApplication sharedApplication] delegate]; [del.window addSubview:del.viewController.view]; [del.window makeKeyAndVisible]; // this is code to call glgif class and start anim. //code to resume the director AppDelegate *del = [[UIApplication sharedApplication] delegate]; [[Director sharedDirector] resume]; [[Director sharedDirector] attachInView:del.window]; MScene *m = [MScene node]; [[Director sharedDirector] replaceScene:m];

  Read the article

• C#: WebBrowser.Navigated Only Fires when I MessageBox.Show();

  - by tsilb

  I have a WebBrowser control which is being instantiated dynamically from a background STA thread because the parent thread is a BackgroundWorker and has lots of other things to do. The problem is that the Navigated event never fires, unless I pop a MessageBox.Show() in the method that told it to .Navigate(). I shall explain: ThreadStart ts = new ThreadStart(GetLandingPageContent_ChildThread); Thread t = new Thread(ts); t.SetApartmentState(ApartmentState.STA); t.Name = "Mailbox Processor"; t.Start(); protected void GetLandingPageContent_ChildThread() { WebBrowser wb = new WebBrowser(); wb.Navigated += new WebBrowserNavigatedEventHandler(wb_Navigated); wb.Navigate(_url); MessageBox.Show("W00t"); } protected void wb_Navigated(object sender, WebBrowserNavigatedEventArgs e) { WebBrowser wb = (WebBrowser)sender; // Breakpoint HtmlDocument hDoc = wb.Document; } This works fine; but the messagebox will get in the way since this is an automation app. When I remove the MessageBox.Show(), the WebBrowser.Navigated event never fires. I've tried supplanting this line with a Thread.Sleep(), and by suspending the parent thread. Once I get this out of the way, I intend to Suspend the parent thread while the WebBrowser is doing its job and find some way of passing the resulting HTML back to the parent thread so it can continue with further logic. Why does it do this? How can I fix it? If someone can provide me with a way to fetch the content of a web page, fill out some data, and return the content of the page on the other side of the submit button, all against a webserver that doesn't support POST verbs nor passing data via QueryString, I'll also accept that answer as this whole exercise will have been unneccessary.

  Read the article

• Maven GAE Plugin - Unable to run gae:debug

  - by Taylor L

  I'm having trouble running the gae:debug goal of the Maven GAE Plugin. The error I'm receiving is below. Any ideas? I'm running it with "mvn gae:debug". [INFO] Packaging webapp [INFO] Assembling webapp[test-gae] in [C:\development\test-gae\target\test-gae-0.0.1-SNAPSHOT] [INFO] Processing war project [INFO] Webapp assembled in[56 msecs] [INFO] Building war: C:\development\test-gae\target\test-gae-0.0.1-SNAPSHOT.war [INFO] [statemgmt:end-fork] [INFO] Ending forked execution [fork id: -2101914270] [INFO] [gae:debug] Usage: <dev-appserver> [options] <war directory> Options: --help, -h Show this help message and exit. --server=SERVER The server to use to determine the latest -s SERVER SDK version. --address=ADDRESS The address of the interface on the local machine -a ADDRESS to bind to (or 0.0.0.0 for all interfaces). --port=PORT The port number to bind to on the local machine. -p PORT --sdk_root=root Overrides where the SDK is located. --disable_update_check Disable the check for newer SDK versions. EDIT: gae:run with the jvmFlags option is also giving me the same result with the below configuration. <plugin> <groupId>net.kindleit</groupId> <artifactId>maven-gae-plugin</artifactId> <version>0.5.0</version> <configuration> <jvmFlags> <jvmFlag>-Xdebug</jvmFlag> <jvmFlag>-Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=8000</jvmFlag> </jvmFlags> </configuration> </plugin>

  Read the article

• Dynamically create a text file from a C# program

  - by techstu

  Can I dynamically create a text file from a C# program, using data from a previously created xml file and text file, I have written half the code, but can't go any further please help using System; using System.IO; using System.Xml; namespace Task3 { class TextFileReader { static void Main(string[] args) { String strn=" ", strsn=String.Empty; XmlTextReader reader = new XmlTextReader("my.xml"); while (reader.Read()) { switch (reader.NodeType) { case XmlNodeType.Element: // The node is an element. if (reader.HasAttributes) { strn = reader.GetAttribute(0); strsn = reader.GetAttribute(1); int counter = 0; string line; // Read the file and display it line by line. System.IO.StreamReader file = new System.IO.StreamReader("read_file.txt"); string ch, ch1; while ((line = file.ReadLine()) != null) { if (line.Substring(0, 1).Equals("%")) { int a = line.IndexOf('%'); int b = line.LastIndexOf('%'); ch = line.Substring(a + 1, b - 1); ch1 = line.Substring(a, b+1); if (ch == "name") { string test = line.Replace(ch1, strn); Console.WriteLine(test); } else if (ch == "sirname") { string test = line.Replace(ch1, strsn); Console.WriteLine(test); } } else { Console.WriteLine(line); } counter++; } file.Close(); } break; } } // Suspend the screen. Console.ReadLine(); } } } the xml file from which i am reading is: <?xml version="1.0" encoding="utf-8" ?> - <Workflow> <User UserName="pqr" Sirname="sbd" /> <User UserName="abc" Sirname="xyz" /> </Workflow> and the text file is: hi this is me %sirname% %name% but this is not wat i want..please help

  Read the article

• Disable Painting of the VScrollbar in a System.Windows.Forms.RichTextBox

  - by SchlaWiener

  I have a custom control inherited from RichTextBox. This control has the ability to "disable" rich text editing. I achive this by just setting the Rtf property to the text property during the TextChanged event. this is how my code looks like: private bool lockTextChanged; void RichTextBox_TextChanged(object sender, EventArgs e) { // prevent StackOverflowException if (lockTextChanged) return; // remember current position int rtbstart = rtb.SelectionStart; int len = rtb.SelectionLength; // prevent painting rtb.SuspendLayout(); // set the text property to remove the entire formatting. lockTextChanged = true; rtb.Text = rtb.Text; rtb.Select(rtbstart, len); lockTextChanged = false; rtb.ResumeLayout(true); } That worked well. However in a large text with like 200 lines the controls jitters (you see the first lines of text for the wink). To prevent that from happening I filter the WM_PAINT between SuspendLayout() and ResumeLayout() private bool layoutSuspended; public new void SuspendLayout() { layoutSuspended = true; base.SuspendLayout(); } public new void ResumeLayout() { layoutSuspended = false; base.ResumeLayout(); } public new void ResumeLayout(bool performLayout) { layoutSuspended = false; base.ResumeLayout(performLayout); } private const int WM_PAINT = 0x000F; protected override void WndProc(ref System.Windows.Forms.Message m) { if (!(m.Msg == WM_PAINT && layoutSuspended)) base.WndProc(ref m); } that did the trick, the RichTextBox isn't jittering anymoe. That's what I wanted to achive, except one thing: The scrollbar is still jittering everytime I type text to my control. Now my question: Does anyone have a clue for me how to prevent the scrollbar from redrawing during Suspend/Resume Layout?

  Read the article

• Java process is not terminating after starting an external process

  - by tangens

  On Windows I've started a program "async.cmd" with a ProcessBuilder like this: ProcessBuilder processBuilder = new ProcessBuilder( "async.cmd" ); processBuilder.redirectErrorStream( true ); processBuilder.start(); Then I read the output of the process in a separate thread like this: byte[] buffer = new byte[ 8192 ]; while( !interrupted() ) { int available = m_inputStream.available(); if( available == 0 ) { Thread.sleep( 100 ); continue; } int len = Math.min( buffer.length, available ); len = m_inputStream.read( buffer, 0, len ); if( len == -1 ) { throw new CX_InternalError(); } String outString = new String( buffer, 0, len ); m_output.append( outString ); } Now it happened that the content of the file "async.cmd" was this: REM start a command window start cmd /k The process that started this extenal program terminated (process.waitFor() returned the exit value). Then I sent an readerThread.interrupt() to the reader thread and the thread terminated, too. But there was still a thread running that wasn't terminating. This thread kept my java application running even if it exited its main method. With the debugger (eclipse) I wasn't able to suspend this thread. After I quit the opened command window, my java program exited, too. Question How can I quit my java program while the command window stays open?

  Read the article

• Write Null/Nothing value with Databinding

  - by clawson

  I have extended a MaskedTextBox component to add some functionality. The text property of the extended MaskedTextBox is bound to a DateTime? property and the format of binding is set to a time format of "HH:mm:ss" (i.e. 24hr time). So that this masked text box will capture the display a time. The extra functionality I have added is to make the component readonly unless the component is double clicked or the enter button is pressed (the back color of the control helps to inform the users if the component is locked/readonly or not). When the enter button is pressed I also suspend the bindings so that bound data is updated the users input won't be lost. The information is then written back to the value and databindings resumed when the user presses the enter key again. This all works fine up to here, with values written and displayed as would be expected. However, I also want to write the null or nothing value to the DateTime? property if the user hasn't entered any text (or invalid text but let's just stick with no text) when enter key is pressed to submit the new value. Unlike with other valid entries in the MaskedTextBox, with no text entered when i execute: Me.DataBindings("Text").WriteValue() (when 'locking' the MaskedTextBox) it then branches to the bound properties Get method as I step into each line of code in the debugger (as opposed to the Set method with other valid entries) How can I write this null/nothing/"" value to the DateTime? property when no text "" is entered into the MaskedTextBox? Thanks for the help!

  Read the article

• Memory Leak Looping cfmodule inside cffunction

  - by orangepips

  Hoping someone else can confirm or tell me what I'm doing wrong. I am able to consistently reproduce an OOM running by calling the file oom.cfm (shown below). Using jconsole I am able to see the request consumes memory and never releases it until complete. The issue appears to be calling <cfmodule> inside of <cffunction>, where if I comment out the <cfmodule> call things are garbage collected while the request is running. ColdFusion version: 9,0,1,274733 JVM Arguments java.home=C:/Program Files/Java/jdk1.6.0_18 java.args=-server -Xms768m -Xmx768m -Dsun.io.useCanonCaches=false -XX:MaxPermSize=512m -XX:+UseParallelGC -Xbatch -Dcoldfusion.rootDir={application.home}/ -Djava.security.policy={application.home}/servers/41ep8/cfusion.ear/cfusion.war/WEB-INF/cfusion/lib/coldfusion.policy -Djava.security.auth.policy={application.home}/servers/41ep8/cfusion.ear/cfusion.war/WEB-INF/cfusion/lib/neo_jaas.policy -Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n,address=56033 Test Case oom.cfm (this calls template.cfm below) <cffunction name="fun" output="false" access="public" returntype="any" hint=""> <cfset var local = structNew()/> <!--- comment out cfmodule and no OOM ---> <cfmodule template="template.cfm"> </cffunction> <cfset size = 1000 * 200> <cfloop from="1" to="#size#" index="idx"> <cfset fun()> <cfif NOT idx mod 1000> <cflog file="se-err" text="#idx# of #size#"> </cfif> </cfloop> template.cfm <!--- I am empty! --->

  Read the article

• Loading an XML configuration file BEFORE the flex application loads

  - by Shahar

  Hi, We are using an XML file as an external configuration file for several parameters in our application (including default values for UI components and properties values of some service layer objects). The idea is to be able to load the XML configuration file before the flex application initializes any of its components. This is crucial because XML loading is processed a-synchronously in flex, which can potentially cause race-conditions in the application. For example: the configuration file holds the endpoint URL of a web service used to obtain data from the server. The URL resides in the XML because we want to allow our users to alter the endpoint URL according to their environment. Now because the endpoint URL is retrieved only after the XML has been completely loaded, some of the application's components might be invoking operations on this web service before it is initialized with the correct endpoint. The trivial solution would have been to suspend the initialization of the application until the complete event is dispatched by the loader. But it appears that this solution is far from being trivial. I haven't found a single solution that allows me to load the XML before any other object in the application. Can anyone advice or comment on this matter? Regards, Shahar

  Read the article

• Determine target architecture of binary file in Linux (library or executable)

  - by Fernando Miguélez

  We have an issue related to a Java application running under a (rather old) FC3 on a Advantech POS board with a Via C3 processor. The java application has several compiled shared libs that are accessed via JNI. Via C3 processor is suppossed to be i686 compatible. Some time ago after installing Ubuntu 6.10 on a MiniItx board with the same processor I found out that the previous statement is not 100% true. The Ubuntu kernel hanged on startup due to the lack of some specific and optional instructions of the i686 set in the C3 processor. These instructions missing in C3 implementation of i686 set are used by default by GCC compiler when using i686 optimizations. The solution in this case was to go with a i386 compiled version of Ubuntu distribution. The base problem with the Java application is that the FC3 distribution was installed on the HD by cloning from an image of the HD of another PC, this time an Intel P4. Afterwards the distribution needed some hacking to have it running such as replacing some packages (such as the kernel one) with the i383 compiled version. The problem is that after working for a while the system completely hangs without a trace. I am afraid that some i686 code is left somewhere in the system and could be executed randomly at any time (for example after recovering from suspend mode or something like that). My question is: Is there any tool or way to find out at what specific architecture is an binary file (executable or library) aimed provided that "file" does not give so much information?

  Read the article

• Are Thread.stop and friends ever safe in Java?

  - by Stephen C

  The stop(), suspend(), and resume() in java.lang.Thread are deprecated because they are unsafe. The Sun recommended work around is to use Thread.interrupt(), but that approach doesn't work in all cases. For example, if you are call a library method that doesn't explicitly or implicitly check the interrupted flag, you have no choice but to wait for the call to finish. So, I'm wondering if it is possible to characterize situations where it is (provably) safe to call stop() on a Thread. For example, would it be safe to stop() a thread that did nothing but call find(...) or match(...) on a java.util.regex.Matcher? (If there are any Sun engineers reading this ... a definitive answer would be really appreciated.) EDIT: Answers that simply restate the mantra that you should not call stop() because it is deprecated, unsafe, whatever are missing the point of this question. I know that that it is genuinely unsafe in the majority of cases, and that if there is a viable alternative you should always use that instead. This question is about the subset cases where it is safe. Specifically, what is that subset?

  Read the article

• Oracle WebCenter Portlet Debugging

  - by Alexander Rudat

  IntroductionThis article describes how to debug a portlets that is already deployed to WebLogic server using Oracle JDeveloper 11g.OverviewThese a Normal 0 21 false false false DE X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} re the basic steps involved in remote debugging an WebCenter portlets deployed in WebLogic:Configuration of the WebLogic to support remote debuggingConfiguration of the portlet project in JDeveloperActual debugging of the portletConfiguration of the WebLogicTo start the WebLogic server in debugging mode, there are a couple of configuration changes that need to be done to the WebLogic domain where the portlet is deployed.First we need to edit JVM options of the WebLogic server startup script where the portlet is deployed. Normally the startManagedWebLogic.cmd is used to start this managed server.This startup script is located in the %MIDDLEWARE_HOME%\user_projects\domains\<domain_name>\bin  directory, where %MIDDLEWARE_HOME% is the installation directory of WebLogic.Add the following line before the set JAVA_OPTIONS= line:set REMOTE_DEBUG_JAVA_OPTIONS=-Xdebug -Xnoagent -Xrunjdwp:transport=dt_socket,address=4000,server=y,suspend=nChange the set JAVA_OPTIONS= line to read like the one below:set JAVA_OPTIONS=%SAVE_JAVA_OPTIONS% %ADF_JAVA_OPTIONS% %REMOTE_DEBUG_JAVA_OPTIONS%After this changes save the startup script and start the managed server and be sure that you have access to the admin console (for example http://localhost:7001/console).Finally we need to check, that HTTP tunneling is enabled on the managed server. To do this, login to the admin console, select the managed server and select the Protocols tab.Be sure that Enable Tunneling is selected.Configuration of the portletFirst let's create a new run configuration specifically for remote debugging. Double-click the project where you portlets are developed.In the Project Properties select the Run/Debug/Profile page. Click New... to create a new run configuration. In the Create Run Configuration  dialog enter Remote Debugging for the name of the run configuration. Leave the Copy Settings From selection to Default and click OK to create the new run configuration.Once the Remote Debug run configuration is created, select it in the Run Configurations and click Edit... to bring up the Edit Run Configuration dialog. In the Launch Settings page click on the Remote Debugging checkbox to enable remote debugging for this run configuration.Finally select the Remote page and verify that the Protocol is set to Attach to JPDA and the port matches the port specified earlier when configuring WebLogic for remote debugging (defaults to 4000).Actual debugging of the portletTo start the remote debugging profile, right-click on your portlet project and select Start Remote Debugger.Now JDeveloper is asking the host and port specification. If you WebLogic server is installed locally, you can apply the default settings: Set a breakpoint at you java code and run the portal (WebCenter) application, where the portlet is used.That's all, now you are able to debug the portlet java code. Hope you will find all errors in your portlet :-)Referenceshttp://www.oracle.com/technology/products/jdev/howtos/weblogic/remotedebugwls.html

  Read the article

• How to detect and configure an output with xrandr?

  - by ysap

  I have a DELL U2410 monitor connected to a Compaq 100B desktop equipped with an integrated AMD/ATI graphics card (AMD E-350). The installed O/S is Ubuntu 10.04 LTS. The computer is connected to the monitor via the DVI connection. The problem is that I cannot set the desktop resolution to the native 1920x1200. The maximum allowed resolution is 1600x1200. Doing some research I found about the xrandr utility. Unfortunately, when trying to use it I cannot configure it to the required resolution. First, it does not report the output name (which supposed to be DVI-0), saying default instead. Without it I cannot use the --fb option. The EDID utility seems to identify the monitor well. Here's the output from get-edid: # EDID version 1 revision 3 Section "Monitor" # Block type: 2:0 3:ff # Block type: 2:0 3:fc Identifier "DELL U2410" VendorName "DEL" ModelName "DELL U2410" # Block type: 2:0 3:ff # Block type: 2:0 3:fc # Block type: 2:0 3:fd HorizSync 30-81 VertRefresh 56-76 # Max dot clock (video bandwidth) 170 MHz # DPMS capabilities: Active off:yes Suspend:yes Standby:yes Mode "1920x1200" # vfreq 59.950Hz, hfreq 74.038kHz DotClock 154.000000 HTimings 1920 1968 2000 2080 VTimings 1200 1203 1209 1235 Flags "-HSync" "+VSync" EndMode # Block type: 2:0 3:ff # Block type: 2:0 3:fc # Block type: 2:0 3:fd EndSection but the xrandr -q command returns: Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 0.0* 1280x1024 0.0 1152x864 0.0 1024x768 0.0 800x600 0.0 640x480 0.0 720x400 0.0 When I try to set the resolution, I get: $ xrandr --fb 1920x1200 xrandr: screen cannot be larger than 1600x1200 (desired size 1920x1200) $ xrandr --output DVI-0 --auto warning: output DVI-0 not found; ignoring How can I set the screen resolution to 1920x1200? Why doesn't xrandr identify the DVI-0 output? Note that the same computer running Ubuntu version higher than 10.04 detects the correct resolution with no problems. On this machine I cannot upgrade due to some legacy hardware compatibility problems. Also, I don't see any optional screen drivers available in the Hardware Drivers dialog. ---- UPDATE: following the answer to this question, I got some advance. Now the required mode is listed in the xrandr -q list, but I can't switch to that mode. Using the Monitors applet (which now shows the new mode), I get the response that: The selected configuration for displays could not be applied. Could not set the configuration to CRTC 262. From the command line it looks like this: $ cvt 1920 1200 60 # 1920x1200 59.88 Hz (CVT 2.30MA) hsync: 74.56 kHz; pclk: 193.25 MHz Modeline "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync $ xrandr --newmode "1920x1200_60.00" 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync $ xrandr -q Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 0.0* 1280x1024 0.0 1152x864 0.0 1024x768 0.0 800x600 0.0 640x480 0.0 720x400 0.0 1920x1200_60.00 (0x120) 193.0MHz h: width 1920 start 2056 end 2256 total 2592 skew 0 clock 74.5KHz v: height 1200 start 1203 end 1209 total 1245 clock 59.8Hz $ xrandr --addmode default 1920x1200_60.00 $ xrandr -q Screen 0: minimum 640 x 400, current 1600 x 1200, maximum 1600 x 1200 default connected 1600x1200+0+0 0mm x 0mm 1600x1200 0.0* 1280x1024 0.0 1152x864 0.0 1024x768 0.0 800x600 0.0 640x480 0.0 720x400 0.0 1920x1200_60.00 59.8 $ xrandr --output default --mode 1920x1200_60.00 xrandr: Configure crtc 0 failed Another piece of info (if it helps anyone): $ sudo lshw -c video *-display UNCLAIMED description: VGA compatible controller product: ATI Technologies Inc vendor: ATI Technologies Inc physical id: 1 bus info: pci@0000:00:01.0 version: 00 width: 32 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: latency=0 resources: memory:c0000000-cfffffff(prefetchable) ioport:f000(size=256) memory:feb00000-feb3ffff

  Read the article

• IIS Logfile Visualization with XNA

  - by BobPalmer

  In my office, I have a wall mounted monitor who's whole purpose in life is to display perfmon stats from our various servers.  And on a fairly regular basis, I have folks walk by asking what the lines mean.    After providing the requisite explaination about CPU utilization, disk I/O bottlenecks, etc. this is usually followed by some blank stares from the user in question, and a distillation of all of our engineering wizardry down to the phrase 'So when the red line goes up that's bad then?'   This of course would not do.  So I talked to my friends and our network admin about an option to show something more eye catching and visual, with which we could catch at a glance a feel for what was up with our site.    He initially pointed me out to a video showing GLTail and Chipmunk done in Ruby.  Realizing this was both awesome, and that I needed an excuse to do something in XNA, I decided to knock out a proof of concept for something very similar, but with a few tweaks.   Here's a link to a video of the current prototype:   http://www.youtube.com/watch?v=jM_PWZbtH2I   Essentially this app opens up a log file (even an active one) and begins pulling out the lines of text.  (Here's a good Code Project link that covers how to do tail reading from an active text file: http://www.codeproject.com/KB/files/tail.aspx).   As new data is added, a bubble is generated in the application - a GET statement comes from the left, and a POST from the right.  I then run it through a series of expression checkers, and based on the kind of statement and the pattern, a bubble of an appropriate color is generated.   For example, if I get a 500, a huge red bubble pops out.  Others are based on the part of the system the page is from - i.e. green bubbles are from our claims management subsystem, and blue bubbles are from the pages our scheduling staff use to schedule patients.  Others include the purple bubbles for security and login, and yellow bubbles for some miscellaneous pages.   The little grey bubbles represent things like images, JS, CSS, etc - and their small size makes them work like grease to keep the larger page bubbles moving.   The app is also smart enough that if it is starting to bog down with handling the physics and interactions, it will suspend new bubbles until enough have dropped off that performance can resume (you can see this slight stuttering in the sample video).   The net result is that anyone will be able to look up on the wall monitor, and instantly get a quick feel for how things are going on the floor.  Website slow?  You can get a feel for both volume and utilized modules with one glance.  Website crashing?  Look for a wall of giant red bubbles.  No activity at all?  Maybe the site is down.  Now couple this with utilization within a farm, and cross referenced with a second app showing the same kind of data from your SQL database...   As for the app itself, it's a windows XNA project with the code in C#.   The physics are handled by the Farseer physicis eingine for XNA (http://www.codeplex.com/FarseerPhysics) which is just pure goodness.  The samples are great, and I had the app up and working in two evenings (half of that was fine tuning, and the other was me coding with a kid in my lap).   My next steps include wiring this to SQL (I have some ideas...), and adding a nice configuration module.  For example, you could use polygons, etc to tie to your regex - or more entertaining things like having a little human ragdoll to represent a user login.     Once that's wrapped up and I have a chance to complete some hardening, I will be releasing the whole thing into the wild as opensource.     Feel free to ping me if you have any questions! -Bob

  Read the article

• MySQL Cluster 7.3: On-Demand Webinar and Q&A Available

  - by Mat Keep

  The on-demand webinar for the MySQL Cluster 7.3 Development Release is now available. You can learn more about the design, implementation and getting started with all of the new MySQL Cluster 7.3 features from the comfort and convenience of your own device, including: - Foreign Key constraints in MySQL Cluster - Node.js NoSQL API  - Auto-installation of higher performance distributed, clusters We received some great questions over the course of the webinar, and I wanted to share those for the benefit of a broader audience. Q. What Foreign Key actions are supported: A. The core referential actions defined in the SQL:2003 standard are implemented: CASCADE RESTRICT NO ACTION SET NULL Q. Where are Foreign Keys implemented, ie data nodes or SQL nodes? A. They are implemented in the data nodes, therefore can be enforced for both the SQL and NoSQL APIs Q. Are they compatible with the InnoDB Foreign Key implementation? A. Yes, with the following exceptions: - InnoDB doesn’t support “No Action” constraints, MySQL Cluster does - You can choose to suspend FK constraint enforcement with InnoDB using the FOREIGN_KEY_CHECKS parameter; at the moment, MySQL Cluster ignores that parameter. - You cannot set up FKs between 2 tables where one is stored using MySQL Cluster and the other InnoDB. - You cannot change primary keys through the NDB API which means that the MySQL Server actually has to simulate such operations by deleting and re-adding the row. If the PK in the parent table has a FK constraint on it then this causes non-ideal behaviour. With Restrict or No Action constraints, the change will result in an error. With Cascaded constraints, you’d want the rows in the child table to be updated with the new FK value but, the implicit delete of the row from the parent table would remove the associated rows from the child table and the subsequent implicit insert into the parent wouldn’t reinstate the child rows. For this reason, an attempt to add an ON UPDATE CASCADE where the parent column is a primary key will be rejected. Q. Does adding or dropping Foreign Keys cause downtime due to a schema change? A. Nope, this is an online operation. MySQL Cluster supports a number of on-line schema changes, ie adding and dropping indexes, adding columns, etc. Q. Where can I see an example of node.js with MySQL Cluster? A. Check out the tutorial and download the code from GitHub Q. Can I use the auto-installer to support remote deployments? How about setting up MySQL Cluster 7.2? A. Yes to both! Q. Can I get a demo Check out the tutorial. You can download the code from http://labs.mysql.com/ Go to Select Build drop-down box Q. What is be minimum internet speen required for Geo distributed cluster with synchronous replication? A. if you're splitting you cluster between sites then we recommend a network latency of 20ms or less. Alternatively, use MySQL asynchronous replication where the latency of your WAN doesn't impact the latency of your reads/writes. Q. Where you can one learn more about the PayPal project with MySQL Cluster? A. Take a look at the following - you'll find press coverage, a video and slides from their keynote presentation  So, if you want to learn more, listen to the new MySQL Cluster 7.3 on-demand webinar  MySQL Cluster 7.3 is still in the development phase, so it would be great to get your feedback on these new features, and things you want to see!

  Read the article

• New Analytic settings for the new code

  - by Steve Tunstall

  If you have upgraded to the new 2011.1.3.0 code, you may find some very useful settings for the Analytics. If you didn't already know, the analytic datasets have the potential to fill up your OS hard drives. The more datasets you use and create, that faster this can happen. Since they take a measurement every second, forever, some of these metrics can get in the multiple GB size in a matter of weeks. The traditional 'fix' was that you had to go into Analytics -> Datasets about once a month and clean up the largest datasets. You did this by deleting them. Ouch. Now you lost all of that historical data that you might have wanted to check out many months from now. Or, you had to export each metric individually to a CSV file first. Not very easy or fun. You could also suspend a dataset, and have it not collect data at all. Well, that fixed the problem, didn't it? of course you now had no data to go look at. Hmmmm.... All of this is no longer a concern. Check out the new Settings tab under Analytics... Now, I can tell the ZFSSA to keep every second of data for, say, 2 weeks, and then average those 60 seconds of each minute into a single 'minute' value. I can go even further and ask it to average those 60 minutes of data into a single 'hour' value.  This allows me to effectively shrink my older datasets by a factor of 1/3600 !!! Very cool. I can now allow my datasets to go forever, and really never have to worry about them filling up my OS drives. That's great going forward, but what about those huge datasets you already have? No problem. Another new feature in 2011.1.3.0 is the ability to shrink the older datasets in the same way. Check this out. I have here a dataset called "Disk: I/O opps per second" that is about 6.32M on disk (You need not worry so much about the "In Core" value, as that is in RAM, and it fluctuates all the time. Once you stop viewing a particular metric, you will see that shrink over time, just relax).  When one clicks on the trash can icon to the right of the dataset, it used to delete the whole thing, and you would have to re-create it from scratch to get the data collecting again. Now, however, it gives you this prompt: As you can see, this allows you to once again shrink the dataset by averaging the second data into minutes or hours. Here is my new dataset size after I do this. So it shrank from 6.32MB down to 2.87MB, but i can still see my metrics going back to the time I began the dataset. Now, you do understand that once you do this, as you look back in time to the minute or hour data metrics, that you are going to see much larger time values, right? You will need to decide what size of granularity you can live with, and for how long. Check this out. Here is my Disk: Percent utilized from 5-21-2012 2:42 pm to 4:22 pm: After I went through the delete process to change everything older than 1 week to "Minutes", the same date and time looks like this: Just understand what this will do and how you want to use it. Right now, I'm thinking of keeping the last 6 weeks of data as "seconds", and then the last 3 months as "Minutes", and then "Hours" forever after that. I'll check back in six months and see how the sizes look. Steve 

  Read the article

• Ubuntu: Multiple NICs, one used only for Wake-On-LAN

  - by jcwx86

  This is similar to some other questions, but I have a specific need which is not covered in the other questions. I have an Ubuntu server (11.10) with two NICs. One is built into the motherboard and the other is a PCI express card. I want to have my server connected to the internet via my NAT router and also have it able to wake from suspend using a Magic Packet (henceforth referred to as Wake-On-LAN, WOL). I can't do this with just one of the NICs because each has an issue - the built-in NIC will crash the system if it is placed under heavy load (typically downloading data), whilst the PCI express NIC will crash the system if it is used for WOL. I have spent some time investigating these individual problems, to no avail. My plan is thus: use the built-in NIC solely for WOL, and use the PCI express card for all other network communication except WOL. Since I send the WOL Magic Packet to a specific MAC address, there is no danger of hitting the wrong NIC, but there is a danger of using the built-in NIC for general network access, overloading it and crashing the system. Both NICs are wired to the same LAN with address space 192.168.0.0/24. The built-in ethernet card is set to have interface name eth1 and the PCI express card is eth0 in Ubuntu's udev persistent rules (so they stay the same upon reboot). I have been trying to set this up with the /etc/network/interfaces file. Here is where I am currently: auto lo iface lo inet loopback auto eth0 iface eth0 inet static address 192.168.0.3 netmask 255.255.255.0 network 192.168.0.0 broadcast 192.168.0.255 gateway 192.168.0.1 auto eth1 iface eth1 inet static address 192.168.0.254 netmask 255.255.255.0 I think by not specifying a gateway for eth1, I prevent it being used for outgoing requests. I don't mind if it can be reached on 192.168.0.254 on the LAN, i.e. via SSH -- it's IP is irrelevant to WOL, which is based on MAC addresses -- I just don't want it to be used to access internet resources. My kernel routing table (from route -n) is Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 100 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 My question is this: Is this sufficient for what I want to achieve? My research has thrown up the idea of using static routing to specify that eth1 should only be used for WOL on the local network, but I'm not sure this is necessary. I have been monitoring the activity of the interfaces using iptraf and it seems like eth0 takes the vast majority of the packets, though I am not sure that this will be consistent based on my configuration. Given that if I mess up the configuration, my system will likely crash, it is important to me to have this set up correctly!

  Read the article

• Windows 8 disk errors

  - by wrongusername

  So yesterday, I forcibly restarted my Windows 8 PC. VMWare Workstation was having some trouble with the guest Linux Mint OS. It wasn't responding for some time, so I tried suspending it September 28th or perhaps even before. It wouldn't suspend -- I forgot what the window looked like, but all options in the power menu were disabled (i.e. "Shutdown," "Power Off," and options like that were all disabled). I eventually killed the VMWare application through Task Manager, though I was too lazy to hunt down the running virtual machine itself, and decided to kill it by just shutting down my PC entirely. The PC wouldn't shut down for quite some time after the monitor went blank, so I did a cold reset by holding the power button. I then powered it on again and Windows briefly gave me some message like "Search for KERNEL_STACK_INPAGE_ERROR." Windows then started diagnosing some problems and gave me the message, "Repairing disk errors. This might take over an hour to complete." That was yesterday night, and I went to sleep without waiting for it to finish. This morning, it said that the repair failed, and that the log was at C:\windows\system32\LogFiles\srt\srtTrail.txt (as I remember it -- I don't have the exact path I wrote down right now). It gave me some other options to troubleshoot, such as resetting Windows (files and settings still intact, but programs not installed through the app store will be erased). That didn't work (no error message given, I was just told it didn't work). I tried rebooting in safe mode, the same diagnosis process begins, except that this time it doesn't bother with the automatic repairs again. So I tried using the command prompt to try to see if my files are at least still there. I was on the X drive, and I couldn't cd to the C drive. I couldn't find my folder under Users (of course?), and couldn't find the srt folder under LogFiles either. I am not sure what to try next. I have backed up everything, but to the cloud, so if absolutely necessary I can start off with a fresh copy of Windows and restore all my data, though it would be a hassle. Any thoughts on what might be wrong or what I can try? My computer was purchased just this June, so the hard drive should still be pretty new.

  Read the article

• Java ME SDK 3.2 is now live

  - by SungmoonCho

  Hi everyone, It has been a while since we released the last version. We have been very busy integrating new features and making lots of usability improvements into this new version. Datasheet is available here. Please visit Java ME SDK 3.2 download page to get the latest and best version yet! Some of the new features in this version are described below. Embedded Application SupportOracle Java ME SDK 3.2 now supports the new Oracle® Java ME Embedded. This includes support for JSR 228, the Information Module Profile-Next Generation API (IMP-NG). You can test and debug applications either on the built-in device emulators or on your device. Memory MonitorThe Memory Monitor shows memory use as an application runs. It displays a dynamic detailed listing of the memory usage per object in table form, and a graphical representation of the memory use over time. Eclipse IDE supportOracle Java ME SDK 3.2 now officially supports Eclipse IDE. Once you install the Java ME SDK plugins on Eclipse, you can start developing, debugging, and profiling your mobile or embedded application. Skin CreatorWith the Custom Device Skin Creator, you can create your own skins. The appearance of the custom skins is generic, but the functionality can be tailored to your own specifications.  Here are the release highlights. Implementation and support for the new Oracle® Java Wireless Client 3.2 runtime and the Oracle® Java ME Embedded runtime. The AMS in the CLDC emulators has a new look and new functionality (Install Application, Manage Certificate Authorities and Output Console). Support for JSR 228, the Information Module Profile-Next Generation API (IMP-NG). The IMP-NG platform is implemented as a subset of CLDC. Support includes: A new emulator for headless devices. Javadocs for the following Oracle APIs: Device Access API, Logging API, AMS API, and AccessPoint API. New demos for IMP-NG features can be run on the emulator or on a real device running the Oracle® Java ME Embedded runtime. New Custom Device Skin Creator. This tool provides a way to create and manage custom emulator skins. The skin appearance is generic, but the functionality, such as the JSRs supported or the device properties, are up to you. This utility only supported in NetBeans. Eclipse plugin for CLDC/MIDP. For the first time Oracle Java ME SDK is available as an Eclipse plugin. The Eclipse version does not support CDC, the Memory Monitor, and the Custom Device Skin Creator in this release. All Java ME tools are implemented as NetBeans plugins. As of the plugin integrates Java ME utilities into the standard NetBeans menus. Tools > Java ME menu is the place to launch Java ME utilities, including the new Skin Creator. Profile > Java ME is the place to work with the Network Monitor and the Memory Monitor. Use the standard NetBeans tools for debugging. Profiling, Network monitoring, and Memory monitoring are integrated with the NetBeans profiling tools. New network monitoring protocols are supported in this release: WMA, SIP, Bluetooth and OBEX, SATSA APDU and JCRMI, and server sockets. Java ME SDK Update Center. Oracle Java ME SDK can be updated or extended by new components. The Update Center can download, install, and uninstall plugins specific to the Java ME SDK. A plugin consists of runtime components and skins. Bug fixes and enhancements. This version comes with a few known problems. All of them have workarounds, so I hope you don't get stuck in these issues when you are using the product. It you cannot watch static variables during an Eclipse debugging session, and sometimes the Variable view cannot show data. In the source code, move the mouse over the required variable to inspect the variable value. A real device shown in the Device Selector is deleted from the Device Manager, yet it still appears. Kill the device manager in the system tray, and relaunch it. Then you will see the device removed from the list. On-device profiling does not work on a device. CPU profiling, networking monitoring, and memory monitoring do not work on the device, since the device runtime does not yet support it. Please do the profiling with your emulator first, and then test your application on the device. In the Device Selector, using Clean Database on real external device causes a null pointer exception. External devices do not have a database recognized by the SDK, so you can disregard this exception message. Suspending the Emulator during a Memory Monitor session hangs the emulator. Do not use the Suspend option (F5) while the Memory Monitor is running. If the emulator is hung, open the Windows task manager and stop the emulator process (javaw). To switch to another application while the Memory Monitor is running, choose Application > AMS Home (F4), and select a different application. Please let us know how we can improve it even better, by sending us your feedback. -Java ME SDK Team

  Read the article

< Previous Page | 15 16 17 18 19 20 21  | Next Page >