Search Results

Search found 7154 results on 287 pages for 'networking'.

Page 190/287 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

  • Naming PCs on a mixed hosts home network.

    - by Chris Becke
    I have a home network comprising an Apple iMacs and a Windows 7 PCs - using the internet connection sharing feature on the Windows 7 PC to share the internet connection with the iMac. I have configured the hostnames on each pc so, running hostname on the Windows 7 box says "windows7" and on the iMac says "apple", but, if I try and "ping apple" from Windows 7 or "ping Windows7" from the iMac they can't resolve. what do I need to do to get this 'simple' level on connectivity working?

    Read the article

  • VirtualBox bridged network not working as expected

    - by iby chenko
    I am having hard time getting Bridged network to work with VirtualBox. Idea is to have host as well as one or more guests on same LAN. Using NAT (default) I do get access to internet and any node on the LAN when working from one of the VM guests. However, no LAN node including host can access (or ping) guest in VM. I need to be able to use any guest as if it was a physical computer on the network (need to be accessed by any machine on LAN). According to my understanding of the VirtualBox documentation, this should be Bridged mode. I think I set it correctly, well, actually there is not much to it: 1. select Bridged mode in VM network setup 2. select physical NIC of the host to connect bridge to 3. start VM When I do this, each VM does get new IP address that corresponds to LAN settings : 192.168.1.100 192.168.1.102 192.168.1.103 etc. where host is 192.168.1.80 / 255.255.255.0 (IP addresses above 100 are served by DHCP server). This seem to be correct based on what I know about ethernet. From VM I can ping other nodes like 192.168.1.50 etc. and I still get ethernet access. So far so good... But I STILL cannot ping any of the other VMs (running ones of course). I cannot ping them from other VMs, from host or from other nodes on the LAN. Aside from fact that IP addresses handed to guests are now local, this still acts same as NAT. What is going on? What am I missing? Regards, I

    Read the article

  • Suggestions for transitioning to new GW/private network

    - by Quinten
    I am replacing a private T1 link with a new firewall device with an ipsec tunnel for a branch office. I am trying to figure out the right way to transition folks at the new site over to the new connection, so that they default to using the much faster tunnel. Existing network: 192.168.254.0/24, gw 192.168.254.253 (Cisco router plugged in to private t1) Test network I have been using with ipsec tunnel: 192.168.1.0/24, gw 192.168.1.1 (pfsense fw plugged in to public internet), also plugged in to same switch as the old network. There are probably ~20-30 network devices in the existing subnet, about 5 with static IPs. The remote endpoint is already the firewall--I can't set up redundant links to the existing subnet. In other words, as soon as I change the tunnel configuration to point to 192.168.254.0/24, all devices in the existing subnet will stop working because they point to the wrong gateway. I'd like some ability to do this slowly--such that I can move over a few clients and verify the stability of the new link before moving critical services or less tolerant users over. What's the right way to do this? Change the netmask on all of the devices to /16, and update gateway to point to the new device? Could this cause any problems? Also, how should I handle DNS? The pfsense box is not aware of my Active Directory environment. But if I change DNS to use the local servers, it will result in a huge slowdown as DNS queries will still be routed over the private t1. I need some help coming up with a plan that's not too disruptive but will really let me thoroughly test the stability of the IPSEC tunnel before I make the final switch. The AD version is 2008R2, as are the servers. Workstations are mostly Windows XP SP3. I have not configured the 192.168.1.0/24 as a site in AD sites and services.

    Read the article

  • How to forward traffic using iptables rules?

    - by ProbablePattern
    I am new to iptables and I have been doing Google searches for a few days now without finding a good solution to this problem. I have computer A with a public ip address (say 192.0.2.1) that can access the Internet unrestricted. I have another computer B with a private ip address (192.168.1.1) that can only access computer A. How do I use iptables to forward network traffic from B through A to the Internet? I need to use http, ftp, and https in order to use apt-get with sudo. Both computers run Ubuntu linux. I have tried using Squid but I think it is far too complicated for what I need to do.

    Read the article

  • Configure server on network to analyze traffic

    - by Strajan Sebastian
    I have the following network: http://i.stack.imgur.com/rapkH.jpg I want to send all the traffic from the devices that connect to the 192.168.0.1 router to the 192.168.10.1 router(and eventually to the Internet), by passing through the server and an additional router. Almost 2 days have passed and I can't figure what is wrong. While searching on the Internet for some similar configuration I found some articles that are somehow related to my needs, but the proposed solutions don't seem to work for me. This is a similar article: iptables forwarding between two interface I done the following steps for the configuration process: Set static IP address 192.168.1.90 for the eth0 on the server from the 192.168.1.1 router Set static IP address 192.168.0.90 for the eth1 on the server from the 192.168.0.1 router Forwarded all the traffic from 192.168.0.1 router to the server on eth1 interface witch seems to be working. The router firmware has some option to redirect all the traffic from all the ports to a specified address. Added the following rules on the server(Only the following, there aren't any additional rules): iptables -t nat -A POSTROUTING -o eth1 -j MASQUERADE iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -i eth0 -o eth1 -j ACCEPT I also tried changing iptables -A FORWARD -i eth1 -o eth0 -m state -–state RELATED,ESTABLISHED -j ACCEPT into iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT but still is not working. After adding the following to enable the packet forwarding for the server that is running CentOS: echo 1 /proc/sys/net/ipv4/ip_forward sysctl -w net.ipv4.ip_forward = 1 After a server restart and extra an extra check to see that all the configuration from above are still available I tried to see again if I can ping from a computer connected to 192.168.0.1/24 LAN the router from 192.168.1.1 but it didn't worked. The server has tshark(console wireshark) installed and I found that while sending a ping from a computer connected to 192.168.0.1 router to 192.168.1.1 the 192.168.0.90(eth1) receives the ping but it doesn't forward it to the eth0 interface as the rule tells: iptables -A FORWARD -i eth1 -o eth0 -j ACCEPT and don't now why this is happening. Questions: The iptables seem that don't work as I am expecting. Is there a need to add in the NAT table from iptables rules to redirect the traffic to the proper location, or is something else wrong with what I've done? I want to use tshark to view the traffic on the server because I think that is the best at doing this. Do you know something better that tshark to capture the traffic and maybe analyze it?

    Read the article

  • Applications getting killed automatically

    - by nebi
    I am running httperf client on my m/c and after few seconds it is getting killed. dmesg shows: The command is: httperf --hog --client=0/1 --server=39.0.0.2 --port=80 --uri=/50kb --rate=20000 --send-buffer=4096 --recv-buffer=16384 --num-conns=6000000 --num-calls=1 Although I had done this test no. of times but never faced this error any time. From last two days I am observing this. My Ubuntu version is ubuntu 10.04. and httperf version is httperf-0.9.0 [ 2997.180620] Out of memory: kill process 7977 (apache2) score 70532 or a child [ 2997.180632] Killed process 7977 (apache2) [ 2997.184837] Out of memory: kill process 7971 (rsyslogd) score 8702 or a child [ 2997.184844] Killed process 7971 (rsyslogd) [ 2997.188823] Out of memory: kill process 7978 (apache2) score 1354 or a child [ 2997.188829] Killed process 7978 (apache2) [ 2997.192817] Out of memory: kill process 7973 (atd) score 561 or a child [ 2997.192822] Killed process 7973 (atd) [ 2997.196805] Out of memory: kill process 8102 (httperf) score 471 or a child [ 2997.196811] Killed process 8102 (httperf) Output of free command: total used free shared buffers cached Mem: 3862768 163000 3699768 0 2384 13068 -/+ buffers/cache: 147548 3715220 Swap: 3905528 0 3905528

    Read the article

  • How can I determine the IP addresses allocated by DHCP on a router that I'm connected to?

    - by user234831
    This "router" is not a typical situation. I'm using my phone as a hotspot and can only configure a select number of DHCP options. I can manage the limit on how many devices/clients can use my phone as a hotspot. I have to select from a radio-button list with the options: 2,3,4,5, or 8 I can specify the DHCP starting IP address. In this case, it begins at 192.168.6.106 When I'm connected via WIFI to my phone, an ipconfig /all command shows me that the default gateway is 192.168.6.1 and my IPv4 address is 192.168.1.148. I have the luxury of connecting another device to the phone and that device was assigned 192.168.1.121. I've tried connecting to 192.168.6.1, hoping for some sort of router setup page that I'm used to seeing, but there is no such thing or maybe it's just a matter of incompatable operating systems. In summary, the "router" (phone) has an IP address of 192.168.6.1 and a DHCP server that begins at 192.168.6.106 and allows up to 8 connections. Normally, I would assume a range of 192.168.6.106 - 192.168.6.113, but connected clients are showing otherwise. How can I figure out which IP addresses are set aside by DHCP for clients?

    Read the article

  • Choose source interface for PPTP VPN on Ubuntu

    - by Emyl
    I have an Ubuntu Virtualbox guest with two network interface, eth0 (NAT) and eth1 (bridged). I want to connect to a PPTP VPN using eth1, but I don't know how to specify which interface to use. If i just try: sudo pon myvpn nodetach It fails with: Using interface ppp0 Connect: ppp0 <--> /dev/pts/1 Modem hangup Connection terminated. Looking at routes with route seems to indicate that eth0 is being used: x.x.x.x.no 10.0.2.2 255.255.255.255 UGH 0 0 0 eth0

    Read the article

  • Random TCP Resets

    - by allenwei
    We got randomly TCP "reset" error when we send request to remote server. Log from remote server Cisco TCP Connection Terminated,Nov 05 14:43:39 EST: %ASA-session-6-302014: Teardown TCP connection 640068283 for Outside:xxxx to xxxx duration 0:00:00 bytes 4160 TCP Reset-O One my local machine I saw when I use netstat 100703 connections reset due to unexpected data 324186 connections reset due to early user close I also use tcpdump to see what's wrong with it, I saw xxxx.https: Flags [R.], seq 290, ack 1369, win 136, options [nop,nop,TS val 2871790533 ecr 1897173283], length 0 The problem just happened today, we didn't change anything on our server. Anyone know what's wrong with it? Is it related to code we wrote send out request or related to linux configuration?

    Read the article

  • Routing DHCP traffic over the internet

    - by rmanna
    i'd like to know if it's possible for the internet to be between a DHCP server and the network it's "assigned" to? so basically, something like this: -------------- ------------- ------------- | DHCP Server | | DHCP | | Clients | | |-----Internet-----| Relay Agent |------| 192.168.0.* | | | | 192.168.0.1 | | | -------------- ------------- ------------- the behavior i'm seeing is that the DHCP server is offering 192.168.0.* IPs and sending them back to 192.168.0.1, which it can't reach. i tried masquerading the packets sent by the relay agent but that doesn't seem to work. from what i've been reading, this is normal behavior since the DHCP server uses the GIADDR as the destination address for its OFFERs, and not the actual source IP of the packets it receives from the relay agent. sooo, given that my DHCP server needs to be "on the other side of the internet" as depicted above, how can i get this working? are there settings for dhcpd to do this or is creating a VPN containing the DHCP server and the relay agent the only way? thanks!

    Read the article

  • Auto-detect proxy settings for the network

    - by user42891
    Firefox browser contains network settings under Tools--Options--Advanced--Network--Settings and there is an option to do auto detect proxy settings, how should I enable this? Currently this is manually configured and its possible for users to bypass and use the internet directly. We use a variety of browsers (firefox, IE, chrome, safari, opera) on win xp, win 2003, win vista machines. How should I enable this so that the end user cannot manipulate the settings on his browser to by pass security. I have configured a squid cache proxy server for this purpose.

    Read the article

  • Device that connects to a switch via RJ45, that emulates a PC

    - by Mike Christiansen
    One of my co-workers once saw a device that plugged into a RJ45 jack, that emulated a PC. It could be configured with an IP address, and respond to pings. I was wondering if anyone knew about these, or even what they are called? This will be used to simulate a PC in a classroom environment. Thanks in advance. Edit: This is a CCNA classroom, we are looking to simulate a PC connected to an ethernet port on a router. These will be on different subnets, etc. This might be doable with a VM through VLANs and virtual switches, but then we are getting away from configuring the physical ports on the router the way we want to.

    Read the article

  • list and explanations of ways to boost this router's signal strength? [closed]

    - by barlop
    Possible Duplicates: Improve Wireless Signal How to get wireless coverage over my whole house? What's the best way to increase the range of my 802.11g router? The back of my house doesn't have WiFi Signal I'm interested in ways that are both specific to certain routers, and generic. When I say generic, I don't necessarily mean a one way that works for many.. but it can also be a generic answer, so mentioning solutions for different situations. So not just the one router I mention. Explanations are important, as well as all the ways. One i'm particularly interested in boosting the strength of is this wireless router/modem Netgear VMDG280 maybe anywhere in a big house with three floors, maybe from the garden.

    Read the article

  • cannot using internet in VMWare

    - by user66247
    I am using VMware Workstation version 7 on Ubuntu 10.10. I installed Windows XP service pack 3 for guest os. Within VMWare, I am using bridge connection that I assigned static IP address to be able to ping host IP address but I cannot ping default router gateway. I also tried to command "/etc/init.d/vmware start" on terminal. All tasks are able to start successfully except "VM communication interface socket family" I am not sure that how to setup network for my VMWare by using wireless. Thanks in advance.

    Read the article

  • Why configuring manual IP do not work for me in DHCP?

    - by user58859
    I have broadband connection in my laptop. It's getting the IP by protocol. configuration is : ip : 192.168.1.2 subnet : 255.255.255.0 gateway : 192.168.1.1 Now I am curious, In IPV4 properties when instead of choosing "Obtain an IP address automatically", I choose "Use the following IP address" and configure everything same, why it do not work? Do DHCP do not work when we configure the IP manually? (operating system : windows-7) EDIT : After configuring the ip manually, when I used ipconfig/all , it's showing dhcp enabled : NO. I am not doing it. Why it got disabled automatically? and how to enable it? DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.2(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled

    Read the article

  • I have to manually change the DNS suffix order every time I connect to VPN. Can I change this permanently or fix the problem somehow?

    - by CarlB
    Sorry in advance but I'm a programmer, not a network engineer, so I'm a noob at this stuff. Anyway, when I am not connected to VPN from my work PC at home, I have the following DNS suffixes listed (real domain names substituted): enterprise.org network.org company.com us.enterprise.org After connecting to VPN, one more DNS suffix is added to the very top of the list: problem-domain.com At this point, most network functions that I can normally perform when actually connected to the LAN in the office are unusable. I get error messages about the network paths not being found and what-not. Anyway, I played around with the suffixes and realized that if I just moved problem-domain.com down one spot to the second in the list, all the problems went away. Unfortunately, it returns to the top spot every time I reconnect, and I tend to get disconnected frequently. Is there something else I can do about this or should I just contact the IT department? I've had this problem before and they weren't able to resolve it but I suppose it would be worth trying again if I could get a different person on the job. What I don't understand is that I thought it didn't matter what order the suffixes were in? Isn't Windows supposed to go through each suffix until it finds a match (or has gone through all the suffixes)? Why is it quitting after the first one? Thanks in advance.

    Read the article

  • Website ocasionally does not load on first click

    - by tfe
    Today I noticed that my website hosted on a virtual server ocasionally does not load on first click. I click on some link, browser starts loading page but nothing loads and does not not appear any error message (like "connection reset by peer etc). Nothing. When I click the same link again, page loads immediately. The same situation on 2 computers in different browsers. It happends not always, maybe on each 20... or 30 click. Sites from other servers load without this problem. Any ideas what can cause this problem?

    Read the article

  • Access MacZFS via network from XBMC

    - by AreusAstarte
    I have a ZFS RAID (zpool with three drives) hooked up to my Mac that I want to share in my LAN so that the XBMC client on my OUYA console hooked up to the television can read the drive and use it to stream my movies and television shows onto the television set. I've searched around for a bit but so far haven't found anything that helped me with it. I know that when connecting to the Mac with SSH I can't just access the drive due to different formatting. What do I have to do so that XBMC will be able to read it? How do I share it?

    Read the article

  • I dont understand why [closed]

    - by gcc
    I dont understand why they vote down my question ,I couldont understand them -they do know nothing ,donot try to solve it-but they do vote down.If you do know nothing , dont fuck something or dont try to mess up

    Read the article

  • Why is iTunes using so much data?

    - by George
    I've been told by my ISP I'm using too much bandwidth so after using Activity Monitor to see that I'm using ~2GB a day I've used the nettop command line utility to work out where. Turns out it's iTunes. I don't use it for downloading/streaming music (other than podcasts of which I definitely don't have 2GB of new ones a day) or movies. What is iTunes doing? This is on a late 2009 MacBook running Lion 10.7.5 with iTunes version 10.7

    Read the article

  • Windows Update broke Wirless driver - Can't get it working again

    - by private_meta
    I naively installed a driver update incoming from Windows Updates yesterday. That caused my Wifi on my Notebook (HP ELitebook 2740p) to break. The network is working as I tried it with my other mobile devices. When installing said driver, it told me that the installation failed. I tried to do a system restore, which did not help getting wifi connectivity back. The device said it was working, but did not get any wifi connection and did not discover any networks. What I tried next was to uninstall the device from my Device Manager and install either the current drivers found through windows, then I tried the same with the current drivers on the HP driver page. both of those attempts failed. It always tells me that installation failed when I uninstall and reinstall drivers. If I try to update the broken driver via internet, it tells me it is up to date, and in the device manager it still views as broken. Next, I 'played' around a bit and reinstalled drivers, and I managed to install drivers from 2012, and when trying to update drivers manually and picking drivers that match the device, it lets me choose between drivers from 2010 and 2014. 2014 would be the current one, picking the 2010 driver leads to the driver being accepted. However, no wireless network can be found. I'm pretty much out of ideas by now, short of reinstalling. The only option I can still think of was that the device broke at the exact moment I installed the new windows driver, but I find that a bit unlikely. Any help would be appreciated fixing this issue.

    Read the article

  • Wireless adapter won't enable

    - by user52141
    I bought a d-link dwa-125, plugged it in and windows recognized it right away and said everything was good to go. But there were no connection options. When I open up the network control panel and have it show me the adapters... the wireless adapter is greyed out and says it is disabled. So I tell it to enable. It says is it enabling, then says it is enabled... but the adapter stayed greyed out saying disabled. I am running 7 x64. I have reinstalled drivers, connected it via lan and had it update drivers.. same problem. It works just fine on any other computer in the house, just not this one.

    Read the article

  • How to use OpenVPN through a restrictive firewall?

    - by R.L. Stine
    I'm currently in the situation of attempting to setup OpenVPN on a personal VPS, for connection primarily through an overly restrictive firewall. All of the setups mentioned below work when used through a reasonably-firewalled connection. I have tried: OpenVPN running on the standard port OpenVPN running on port 443 (I start OpenVPN manually from the command line on the VPS and see that the server reports the connection being closed almost immediately, I assume this is a result of DPI on the firewall) STunnel running on port 443 to access OpenVPN and evade DPI. This is the most successful and allows a connection and internet access through the VPN for ~10-20 seconds, before the connection is forcibly closed. Is there anything else I can attempt?

    Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >