Search Results

Search found 67318 results on 2693 pages for 'windows boot manager'.

Page 190/2693 | < Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >

  • Windows Server 2003 Standard R2 CD 1 cannot boot: freeze at No Emulation

    - by TGP1994
    Hi everyone. I've been interested in the Windows Server line of OSes, so since I apply for DreamSpark, I thought I'd go download it and try it. I just so happened to have an old desktop that I was using awhile ago for Windows XP, so I imaged the drive in preparation for it to be overwritten with the new OS. (This system has an Asus A7V8X-X motherboard, an AMD Athlon XP 2800+ processor, and 1GB of RAM.) I tried burning the first disk image on my newer desktop computer, running Windows XP, although the CD burner consistently failed at a particular track area from cd to cd, so it seemed like the burner was toast there. Fortunately, I had a laptop, so I transferred the images over to that, then burned the first disc there. First time around went great, and the burning program reported no errors. I then took the CD over to the computer that I was intending to install Server onto, set the BIOS to boot from the CD drive, then I booted it up. Like normal, after the POST, it printed "Boot from ATAPI CD-Rom: No Emulation", which I was used to seeing with bootable cds. I waited for the "Press any key to continue..." message that I had become so familiar with in windows discs, although I saw none. The computer sat there for about 5 seconds with the cd spinning, then it spun down like it was done reading it. Nothing else happened. No response from the keyboard. I tried again, same result. I then downloaded IMGBurn, and I put the burned cd into the laptop that burned it originally. I also downloaded a fresh image from the dreamspark site. I ran a verify session, and everything checked out. I later tried getting various DOS startup discs, then I tried booting the winnt binary, which supposedly initiates the installation process. Either the shells reported that not enough memory was available (since they would be running in low memory mode), or FreeDOS in particular would report Illegal instructions right away. Is the image corrupt at dreamspark, or am I doing something wrong?

    Read the article

  • No Firefox UI if launched during boot-up

    - by kpax
    At work I'm using Windows XP SP2. What I've noticed is if I launch Firefox while Windows hasn't finished booting up, it launches the firefox.exe process but fails to launch the associated UI i.e. there's no Firefox window at the end of it. The only way to resolve this is to kill the firefox.exe process and re-launch Firefox. Has anyone else experienced this kind of behavior? Update: I'm using Firefox 3.6

    Read the article

  • DHCP and DNS services configuration for VOIP system, windows domain, etc

    - by Stemen
    My company has numerous physical offices (for purposes of this discussion, 15 buildings). Some of them are well-connected to our primary data center via fiber. Others will be connected to the data center by P2P T1. We are in the beginning stages of implementing an Avaya VOIP telephone system, and we will be replacing a significant portion of our network infrastructure in the process. In tandem with the phone system implementation, we are going to be re-addressing some of our networks, and consolidating most of our Windows domains into one (not all domains, just most). We currently have quite a few Windows domains, and they of course each have their own DNS zones. A few of those networks currently use DHCP, but the majority use static IP assignments for every device. I'm tired of managing static assignments -- I want to use DHCP configuration on everything except servers. Printers and etc will have DHCP reservations. The new IP phones will need to get IP addresses from DHCP, though they need to be in a separate VLAN from the computers/printers/etc. The computers and printers need to be registered in DNS. That's currently handled by the Windows DHCP servers on each of the respective domains. We need to place a priority on DHCP and DNS being available on a per-site basis (in case something were to interrupt the WAN connection) for computers and (primarily) phones. Smaller locations (which will have IP phones but not be a member of any Windows domain) will not have any Windows DNS/DHCP server(s) available. We also are looking for the easiest way to replace a part if it were to fail. That is to say, if a server/appliance/router hosting DHCP were to crash hard, and we couldn't extremely quickly recover the DHCP reservations and leases (and subsequently restore them onto a cold spare), we anticipate that bad things could happen. What is the best idea for how to re-implement DNS and DHCP keeping all of the above in mind? Some thoughts that have been raised (by myself or my coworkers): Use Windows DNS and DHCP servers, where they exist, and use IP helpers to route DHCP requests to some other Windows server if necessary. May not be acceptable if the WAN goes down and clients don't get a DHCP response. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by Cisco routers. Every site would be covered for DHCP, but from what I've read, Cisco routers can't handle dynamic registration of DHCP clients to Windows DNS servers, which might create a problem where Cisco routers are used for DHCP. Use Windows DNS (everywhere, over WAN in some cases) and a mix of Windows DHCP and DHCP provided by some service running on an extremely low-price linux server. Is there any such software that would allow DHCP leases granted by these linux boxes to be dynamically registered on the Windows DNS servers? Come up with a Linux solution for both DNS and DHCP, and deploy low-price linux servers to every site. Requirements would be that the DNS zone be multi-master (like Windows DNS integrated with Active Directory), that DHCP be able to make dynamic DNS registrations in that zone, for every lease (where a hostname is provided and is thus possible), and that multiple servers be either authoritative for the same DHCP scope or at least receiving a real-time copy / replication / sync of the leases table so that if one server dies, we still know which MAC has what address. Purchase dedicated DNS/DHCP appliances, deploying to all sites. From what I read/see, this solves all of our technical problems. Then come the financial problems... I don't have a ton of money to spend on this. Or, some other solution that we've thus far overlooked and will consider upon recommendation. Can Cisco routers or Windows servers sync DHCP lease tables so that multiple servers can be authoritative (or active/passive for all I care) for the same scope, in case one of the partners were to fail? I've read online (repeatedly) that ISC's DHCP is able to maintain the same lease table across multiple servers, in order to solve this problem. Does anyone have any experience or advice to regarding that?

    Read the article

  • Can not enable Windows SmartScreen. Says: "this setting is managed by your system administrator"

    - by Afshin Gh
    I can not enable my Windows SmartScreen on Windows 8.1 My PC is not joined to any domain. I'm not talking about SmartScreen feature available in IE but the feature that is available in File Explorer. Control Panel Action Center Change Windows SmartScreen settings I searched in group policy but couldn't find anything that is preventing me from enabling it. Update 1: My user is a member of administrators group. Other things work fine. When I try to change something that needs administrative permission, UAC window appears, but nothing here.

    Read the article

  • Metro apps crash on startup, driver or permissions issue?

    - by Vee
    After installing Win8 x64 RC, Metro apps worked correctly, but desktop OpenGL apps were slow and unresponsive. I installed the latest Win8 nVidia drivers, and the OpenGL apps started working correctly. At the same time, because of annoying permission messages, I changed the C:\ drive and all its files ownerships to my user, and gave it full permission. I restarted my pc after installing the drivers, and now Metro apps only show the splash screen, then crash. I tried installing other versions of the nVidia drivers, with the same result. My GPU is a GeForce GTX275. Is this a known problem with nVidia drivers? Or maybe changing the ownership of C:\ is the real problem? Thank you. More information (after looking in the event viewer) I've managed to find the problem and the error in the Event Viewer. I still cannot solve it. Here's the information I found by opening the Mail app and letting it crash: Log Name: Microsoft-Windows-TWinUI/Operational Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 15.54.17 Event ID: 5961 Task Category: (5961) Level: Error Keywords: User: VEE-PC\Vittorio Computer: vee-pc Description: Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail for the Windows.Launch contract failed with error: The app didn't start.. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>5961</EventID> <Version>0</Version> <Level>2</Level> <Task>5961</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T13:54:17.472416600Z" /> <EventRecordID>6524</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="6756" /> <Channel>Microsoft-Windows-TWinUI/Operational</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="AppId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> <Data Name="ContractId">Windows.Launch</Data> <Data Name="ErrorCode">-2144927141</Data> </EventData> </Event> Found other stuff, this is another error that appears when opening a Metro app: Log Name: Application Source: ESENT Date: 07/06/2012 16.01.00 Event ID: 490 Task Category: General Level: Error Keywords: Classic User: N/A Computer: vee-pc Description: svchost (1376) SRUJet: An attempt to open the file "C:\Windows\system32\SRU\SRU.log" for read / write access failed with system error 5 (0x00000005): "Access is denied. ". The open file operation will fail with error -1032 (0xfffffbf8). Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="ESENT" /> <EventID Qualifiers="0">490</EventID> <Level>2</Level> <Task>1</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:01:00.000000000Z" /> <EventRecordID>11854</EventRecordID> <Channel>Application</Channel> <Computer>vee-pc</Computer> <Security /> </System> <EventData> <Data>svchost</Data> <Data>1376</Data> <Data>SRUJet: </Data> <Data>C:\Windows\system32\SRU\SRU.log</Data> <Data>-1032 (0xfffffbf8)</Data> <Data>5 (0x00000005)</Data> <Data>Access is denied. </Data> </EventData> </Event> After changing permissions again (adding Everyone and Creator Owner to System32), the "access denied to sru.log" error disappears, but this one appears in its place: Log Name: Application Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 16.16.34 Event ID: 2486 Task Category: (2414) Level: Error Keywords: (64),Process Lifetime Manager User: VEE-PC\Vittorio Computer: vee-pc Description: App microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail did not launch within its allotted time. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>2486</EventID> <Version>0</Version> <Level>2</Level> <Task>2414</Task> <Opcode>0</Opcode> <Keywords>0x2000000000000042</Keywords> <TimeCreated SystemTime="2012-06-07T14:16:34.616499600Z" /> <EventRecordID>11916</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="6996" /> <Channel>Application</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="ApplicationId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> </EventData> </Event> Now I'm stuck. It tells me "Activation of app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail failed with error: The app didn't start. See the Microsoft-Windows-TWinUI/Operational log for additional information." but I can't find the Microsoft-Windows-TWinUI/Operational log. I'm starting a bounty. I found the TWinUI/Operational log. It only tells me: Log Name: Microsoft-Windows-TWinUI/Operational Source: Microsoft-Windows-Immersive-Shell Date: 07/06/2012 16.28.57 Event ID: 5961 Task Category: (5961) Level: Error Keywords: User: VEE-PC\Vittorio Computer: vee-pc Description: Activation of the app microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail for the Windows.BackgroundTasks contract failed with error: The app didn't start.. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Immersive-Shell" Guid="{315A8872-923E-4EA2-9889-33CD4754BF64}" /> <EventID>5961</EventID> <Version>0</Version> <Level>2</Level> <Task>5961</Task> <Opcode>0</Opcode> <Keywords>0x4000000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:28:57.238140800Z" /> <EventRecordID>6536</EventRecordID> <Correlation /> <Execution ProcessID="3008" ThreadID="2624" /> <Channel>Microsoft-Windows-TWinUI/Operational</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="AppId">microsoft.windowscommunicationsapps_8wekyb3d8bbwe!Microsoft.WindowsLive.Mail</Data> <Data Name="ContractId">Windows.BackgroundTasks</Data> <Data Name="ErrorCode">-2144927141</Data> </EventData> </Event> I need to go deeper. I found a forum thread that told me to look for "DCOM" errors. I found this one related to the app crash "The server Microsoft.WindowsLive.Mail.wwa did not register with DCOM within the required timeout." Log Name: System Source: Microsoft-Windows-DistributedCOM Date: 07/06/2012 16.46.45 Event ID: 10010 Task Category: None Level: Error Keywords: Classic User: VEE-PC\Vittorio Computer: vee-pc Description: The server Microsoft.WindowsLive.Mail.wwa did not register with DCOM within the required timeout. Event Xml: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-DistributedCOM" Guid="{1B562E86-B7AA-4131-BADC-B6F3A001407E}" EventSourceName="DCOM" /> <EventID Qualifiers="0">10010</EventID> <Version>0</Version> <Level>2</Level> <Task>0</Task> <Opcode>0</Opcode> <Keywords>0x8080000000000000</Keywords> <TimeCreated SystemTime="2012-06-07T14:46:45.586943800Z" /> <EventRecordID>2763</EventRecordID> <Correlation /> <Execution ProcessID="804" ThreadID="2364" /> <Channel>System</Channel> <Computer>vee-pc</Computer> <Security UserID="S-1-5-21-2753614643-3522538917-4071044258-1001" /> </System> <EventData> <Data Name="param1">Microsoft.WindowsLive.Mail.wwa</Data> </EventData> </Event>

    Read the article

  • How to block some disks from probes on Linux boot?

    - by Igor Velkov
    My linux host connected to SAN with FC interface. It connect with one path, and see some luns, that can't access, because they need anohter path, not available to host. On boot linux probe all lun he can see, get read error on unaccessible luns, and hangs there for a long-long time. Is there a way to disable any access to some luns at boot time, and later? I found a filters for device ignoration for LVM and MULTIPATH, but it not help during boot process. Generally, lvm still affected too despite of filter, and gives me a IO error on every operation like lvdisplay and vgdisplay, but this is another question.

    Read the article

  • How can I fix a computer that blue screens before Windows starts?

    - by Julio
    I have a Dell Inspiron running Windows 7 that keeps getting blue screens of death. At first, the computer slowed down so much it was unusable. After some time, it wouldn't even load Windows anymore; the machine just started going straight to a BSOD after the starting Windows logo. I have tried loading the reset disc, but it just takes me to a loading lobby and never advances. I don't need the files on the computer, but I do need the machine for school. What can I do?

    Read the article

  • Issues with partitions WIN 7

    - by pomber
    I was trying to make some space to install linux in my HP notebook. The computer had 4 partitions, I made space shrinking one and created a new one (facepalm) using the windows partitioning tool. It show me some warning message saying something about dynamic partitions, I ingored it, and went to the linux live CD. I installed linux in the new partition, after the installation completed it told me that GRUB cannot be installed I dont remember why. So now, it doesnt boot, neither windows nor linux. After google for a while I found the diskpart command, it gives me this info: DISKPART> list disk DISK ### Status -------- --------------- DISK 0 Invalid DISKPART> select disk 0 DISKPART> select partition Partition ### TYPE ------------- -------------- Partition 1 Dynamic Data Partition 2 Dynamic Data Partition 3 Dynamic Data Partition 4 Primary <- I think I put linux here Any idea whats happening? Or how to solve it? Thanks

    Read the article

  • In Windows 7 Home Premium, is it possible to grant a user account the "log on as a service" right and if so, how?

    - by Ryan Johnson
    The title says it all. I need to have the ability for a local user account to log on as a service on a computer running Windows 7 Home Premium. In Windows 7 Ultimate, this is accomplished by going to Control Panel - Administrative Tools - Local Security Policy and adding the user to the "Log on as a service" policy. In Home Premium, there is no Local Security Policy in the Control Panel. Is there another way to add the use to that policy (i.e. registry setting) or is my only recourse to upgrade the computer to Windows 7 Professional? Thanks in Advance, Ryan

    Read the article

  • Windows 7 / 8 tool for amplifying sound / equivalent to pavucontrol?

    - by Quandary
    I'm watching live streamed videos, but the volume sometimes is barely loud enough. With Windows, I can only turn the system volume and the flash volume up to maximum, and then bad luck if that's still not loud enough. On Linux, on the same notebook, I have the same problem, but I can use pavucontrol to amplify the sound volume beyond 100%. Unfortunately, I can't always work on Linux, since Visual Studio and SQL-Server only run on Windows. Is there any tool or way to amplify volume on Windows 7 / 8 , without having to resort to run Linux in a virtual machine?

    Read the article

  • I want to change hard drive. How to move system partition with Windows 7?

    - by Semyon Perepelitsa
    I've bought a new hard drive and want to move all my data to it. I had no problem with moving all files on non-system partition. But I don't know how to move system partiton. Now I have 3 partitions on the new disk, fist two was created by Windows installation CD (I tried to move system using internal tools, but it didn't work for me), third is filled with my successfully transferred data from old disk. And there are two partitions on the old disk: the first one is system (Windows 7) and the second one is my old main storage, that I already moved to the new hard drive and now it is empty. How can I change the placement of Windows 7 with minimal difficulties and losses, so I could work on the new hard drive just as I did it on the old one?

    Read the article

  • Is the Realtek network driver on Windows Update fixed yet?

    - by Ian Boyd
    Months ago i was experiencing problems with my networking, and was hoping the updated Realtek RTL8168C(P)/8111C(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20) driver available from Microsoft on Windows Update would fix the problems. Instead, after the reboot, the network device failed to start, and the driver had to be rolled back. I'm not the only person to get this problem, it even was dealt with by a superuser. A co-worker experienced the exact same problem, and we independently came up with the same solution: hide the updated driver in Windows Update. So I've continued to have my network troubles, and i still need an updated driver. Is the version of the Realtek driver on Windows Update fixed yet? i know Microsoft never pulled it down, but maybe it's been up-updated. i really don't want to find out by downloading it. Can someone else confirm that it's no longer broken - or can someone else be my guinea pig?

    Read the article

  • ATI radeon hd 5450 Graphics Card Issues

    - by RGM-79FP GM Striker
    I have an Old Dell Optiplex 755 SFF with an Intel Core 2 Processor (windows 7). Now This can hold a PCI-E x16 port. Now I got an ATI Radeon HD 5450 low profile. I plugged and played and it fits without a hitch, the software installed too! , now for the graphics well... It doesn't really work at all as it seems to freeze at the moment that it loads on the windows logo. It loads into safe mode so I'm not really sure what the problem is. Any ideas, I read the dell forums and they should be somewhat compatible... with the specs so I'm at a loss here. and I am a novice here. Ideas? Edit I have tried to reset the cmos,no luck there. I have tried to move the ram as well. nothing big happened.

    Read the article

  • User Friendly port knocker (port knocking client) for Windows?

    - by Ekevoo
    It seems "It's me" is the most popular port knocking client for windows… Except… it sucks. It works for console-savvy users such as me, but, unsurprisingly, all my users hate console windows. I know better than to force it upon them. I would love to have a nice port knocker for Windows that would be windowed, have launchers, and be easily provisionable (i.e. I tell my user to paste some settings or import some file by double clicking it). To be honest, just not being console-based would be enough.

    Read the article

  • Best way to Duplicate a Laptop's Hard Drive One-to-One

    - by Urda
    I have a Lenovo X61 Tablet computer, with a plain SATA drive inside. I have windows 7 and Ubuntu 9.10 dual booting on the computer. I want to back up both of these OS's, and their special partitions (Windows 7 has one, and of course the Linux Swap). I want a one-to-one backup, all of my mission critical data is already backed up, but I would like to get a snapshot, and store it on a larger file server at home for quick recovery. What is the best approach to do this?

    Read the article

  • How to install on Windows Server 2008, an application that is not natively supported, but not use co

    - by t3
    I have an application to install on Windows Server 2008, which is not natively supported by the installer. The application installer permits installation on Windows Vista(or XP, or 7). I do not want to use compatibility mode; even if I did it doesn't work. So, how can I spoof the installer to believe it is Windows Vista(or XP, or 7) so that it can proceed with the installation? Notes: This is an experimental machine, so I am not concerned about stability of the host or the application.

    Read the article

  • Did a recent WinXP update break CD/DVD read speeds? SP2/SP3

    - by quack quixote
    I have two systems with fresh installations of Windows XP Pro SP3 (SP3 slipstreamed into the installer; fully updated after install). One's a refurbished 2.4GHz Pentium4 system; the other is a new 1.6GHz Atom330 build. Both have brand-new dual-layer CD/DVD burners (one's a LiteOn IDE, the other an LG SATA). Both take a really looooong time to read a single-layer DVD in Windows with Cygwin tools. Specifically, 40 minutes or more. I burn backup data to single-layer DVD+/-R and use MD5 hashes for data verification (made with the standard md5sum tool in Unix or Cygwin). The hashes are burned to disc with the data files, and I use this command to verify: $ cd /path/to/disc/mountpoint ; time md5sum -c < md5.txt Here's how long that takes to run on a full single-layer DVD+/-R disc: Old system (WinXP SP2, 1.8GHz Athlon 2500+, last summer): ~10 minutes Old system (Ubuntu 9.04, 1.8GHz Athlon 2500+): ~10 minutes Old system (Debian 5, dual 550MHz P3): ~10 minutes New Pentium4 system (running Ubuntu 9.04): ~5 minutes New Pentium4 system (running WinXP SP3, file copy from Win Explorer): ~6 minutes New Atom330 system (running WinXP SP3, file copy from Win Explorer): ~6 minutes Now the weird stuff: Old system (WinXP SP2, 1.8GHz Athlon 2500+, today): ~25 minutes New Pentium4 system (running WinXP SP3, read from Cygwin): ~40-50 minutes (?!!) New Atom330 system (running WinXP SP3, read from Cygwin): ~40 minutes (can do it in ~30 minutes ...if i have another program spin up the drive first) Since both systems will copy files in 6 minutes using Windows Explorer, I know it's not a hardware problem. Windows just never spins up the drive during the Cygwin read, so it stays super-slow the whole time. Other programs like EAC and DVD Decrypter seem to spin up the disc just fine during their processing. DMA is enabled on both systems. (Can confirm in Windows' Device Manager on the Atom330, not on the P4.) Nero's DriveSpeed tool doesn't seem to have any effect. Copy times are comparable from commandline with Windows' xcopy. Copying with Cygwin's cp looks more like the problem state -- it will spin up the drive for a short time, never reaches full speed, and lets it spin back down again for most of the copy. What I need is to get full read speeds from Cygwin. Is this a known issue with SP3 or some other recent Windows update? Any other ideas? Update: More testing; Windows will spin up the drive when data is copied with Windows tools, but not when read in place or copied with Cygwin tools. It doesn't make sense to me that Windows spins up the drive for copying, but not for other reads. Might be more of a Cygwin problem? Update 2: GUI activity is sluggish during the problem state -- during the Cygwin verifies, there's a slight but noticable delay when dragging windows or icons around on the desktop, switching windows, Alt-Tabbing through open applications, opening new windows, etc. It reminds me of the delay when opening a Windows Explorer window on My Computer just after inserting a DVD. I've tried updating Cygwin (from 1.5.x to 1.7.x), but no change in the problem behavior. I've also noticed this issue occurs on WinXP SP2, but it's not exactly the same -- some spin-up occurs, so the read happens in ~25-30 minutes instead of 40+. The SP2 system used to run the verifies in ~10 minutes, and when it first changed (not sure exactly when, maybe in late November or early December 2009) I thought it was dying hardware. This is why I suspect an official update of breaking this functionality; this has worked for years on that SP2 box.

    Read the article

  • How can I set Windows Server 2008 juntion points to Every Read Allow?

    - by brendan
    We have apps running on Windows Server 2003 and now 2008 as well. Unfortunately some of our code relies on inspecting the Documents and Settings directory which no longer exists in Windows 2003. It looks like there are "Junction Points" set up for backwards compatibility - http://msdn.microsoft.com/en-us/library/bb756982.aspx. But it seems like nothing I can do can get me access. I basically need to be able to call from a command line on both 2003 and 2008: C:\Documents and Settings\Administrator\Local Settings\Application Data\Google\Chrome\Application\chrome.exe Which translates in Windows 2008 to : C:\Users\Administrator\AppData\Local\Google\Chrome\Application\chrome.exe I've tried setting up my own "Documents and Settings" folder in 2008 but it won't let me as that seems to be reserved for these Juntion Points.

    Read the article

  • Is there a way for Windows 7 to show remaining disk space in the status bar?

    - by Matt Thompson
    This is really driving me nuts. I do a lot of moving media files to and from USB drives, and I am constantly looking to the status bar to see how much remaining space I have on a drive. It's quick, and doesn't involve any clicking. At least, that's what I used to do using Windows XP. Is there a way to get the status bar in Windows 7 to behave in the same way? I saw in a Wikipedia article that some features have been removed from Windows 7, including these two that seem to be affecting me the most: The size of any selected item and free disk space are not shown on the status bar. When no items are selected in a folder, neither the details pane nor the status bar show the total size of files in the folder. Are there any plug-ins or registry tweaks that can be made to return this functionality? If not what is the quickest way to get the remaining space on a drive without having to click on something and leaving the directory you are working in?

    Read the article

  • Is my large Windows folder slowing down my machine?

    - by Moses
    I have a problem with my Windows installation running very slow and my Windows folder being too large. I thought that the problems are related. My Windows folder is 17.4 GB I have 1807 folders totalling 2.4 GB that are prefaced with a $. My System32 folder is 1.55 GB My Microsoft.NET folder is 654 MB – I don't know what if any programs I have that are using it. My Service Pack folder is 568 MB. The Software Distribution folder is 536 MB The ie8updates folder is 380 MB. How can I reduce the size of these folders and could their size be why I am running do slow?

    Read the article

  • Password Authentication Fails - NTLMv2

    - by JMeterX
    Environment: Windows 2000 sp4 EDIT: Domain Controller with no trust setup with the Win2008 Server Windows XP machines Windows 2008 Server Netapp NAS Problem: We have a shared folder that resides on a NAS using a Windows 2008 AD for the authentication with the proper permissions setup. When the Windows 2000 machine tries to open the share residing on the Win2008 machine, it is prompted for a username and password. Upon entering the credentials it continuously re-asks for credentials. Important Details: The Windows 2000 machine can ping both the XP machines and the Windows 2008 Server The Windows 2008 machine is mandated to only use NTLMv2 The Windows 2000 machine was originally set to NTLM but was recently switched to NTLMv2 if negotiated for the purpose of trying to connect to the share. As I am sure it will come up, we are using Windows 2000 because of contractual obligations Questions: Why is password Authentication failing in this case? After setting a GPO for the Win2000 machine for it to use NTLMv2, do we need to reboot the machine for the changes to take affect? We used SECEDIT to update the GPOs without rebooting. UPDATE We checked both of the 2008 Domain Controllers to find an error code. We received: Microsoft_Auth_Package_V1_0 0xc000006a Event ID: 4776 I know this to be an authentication error via THIS article "The value provided as the current password is not correct" We know this password to be correct, but since these two domains (Win2000 & Win2008) do not have a trust setup what authentication account needs to be used? One that resides on the Win2000 hosted domain?

    Read the article

  • server 2008 r2 stuck on installing updates

    - by volody
    I have 2008 r2 64bit server that is stuck on installing updates. It shows message "Please do not power off or unplug your machine. Installing 57 of 61.." This message is shown for 3 hours now. I was trying to connect to this server using mmc. runas /user:AdministratorAccountName@ComputerName "mmc %windir%\system32\compmgmt.msc" RUNAS ERROR: Unable to run - mmc C:\Windows\system32\compmgmt.msc 1311: There are currently no logon servers available to service the logon request. What else can I do? Update: Remote Desktop does not work. It just disappear after entering username and password from Win7-64 computer Update: I have disconected server. Now Server Manager in Roles Summary shows message "Unexpected error refreshing Server Manager: The remote procedure call failed." Event log shows Could not discover the state of the system. An unexpected exception was found: System.Runtime.InteropServices.COMException (0x800706BE): The remote procedure call failed. (Exception from HRESULT: 0x800706BE) at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo) at Microsoft.Windows.ServerManager.ComponentInstaller.ThrowHResult(Int32 hr) at Microsoft.Windows.ServerManager.ComponentInstaller.CreateSessionAndPackage(IntPtr& session, IntPtr& package) at Microsoft.Windows.ServerManager.ComponentInstaller.InitializeUpdateInfo() at Microsoft.Windows.ServerManager.ComponentInstaller.Initialize() at Microsoft.Windows.ServerManager.Common.Provider.RefreshDiscovery() at Microsoft.Windows.ServerManager.LocalResult.PerformDiscovery() at Microsoft.Windows.ServerManager.ServerManagerModel.CreateLocalResult(RefreshType refreshType) at Microsoft.Windows.ServerManager.ServerManagerModel.InternalRefreshModelResult(Object state) Update: Manual update hangs on (Installing update 58 of 62...) Seurity Update for Windows Server 2008 R2 x64 Edition (KB979309) Update: It could be an issue with that admin user was renamed

    Read the article

  • How to create multiple OS on same DVD [duplicate]

    - by learner
    This question already has an answer here: How to make a multiboot CD that will start a user-chosen ISO file 7 answers I searched this forum but there are only general answers which doesn't give me desired output. Here is what I want to do. I have (1). Windows 7 ISO (2). Windows 8.1 previews ISO and (3). Ubuntu 12.10 ISO files. Using which I want to create single bootable DVD, so that after creating DVD it should ask to choose to install between 3 OS. Is it possible? If so please help me.

    Read the article

  • Can I tell which installation DVD was used for my Windows XP?

    - by Den
    I have two Windows XP installation DVDs (that came from the OEM with my two laptops). I need to reinstall Windows on one of them but I'm not sure which one is which. Is there any way to tell which DVD was used for each laptop? PS. They both came from the same OEM and there're no distinguishing markings on the DVDs themselves. PS2. The reason for my concern is to avoid installation twice, which may invalidate license for already installed Windows XP on one laptop if I duplicate it to another.

    Read the article

< Previous Page | 186 187 188 189 190 191 192 193 194 195 196 197  | Next Page >