Search Results

Search found 25182 results on 1008 pages for 'ask me'.

Page 191/1008 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• Need a PCIe desktop graphics card for dual-monitor

  - by Graham

  I have a mid-2008 workstation with two HD monitors supporting HDMI and DVI inputs. Since Ubuntu 11.10, I have experienced no end of trouble with my NVidia Quadro NVS 290 in TwinView dual-monitor output. Others have similar desktop TwinView woes. I want a new graphics card. Previously I asked for a graphics card recommendation and response was Nvidia Geforce GTS 450... but really I'm looking for someone who has actually got a working dual-monitor desktop to tell me what card they use so I can get something that is known to work. So please, people who have no-issues with their 64-bit Ubuntu 12.04 Unity 3D desktop spread across two HD-resolution external monitors (either DVI or HDMI connector), and who also run Google Chrome (which throws a spanner due to its own GPU compositing)... please let me know what graphics card you have so I can buy one. Gathering Options These seem to be the Nvidia cards featuring dual DVI. But they all seem to be gaming cards - what has dual-DVI, good support, but is not a massive gaming card? Nvidia GTS 450 (previously recommended) - 2x DVI Nvidia GTX 550 Ti (used by System76) - 2x DVI Nvidia GT 430 (used by System76) - 1xDVI, 1xHDMI Nvidia GT 640 (found on NVidia site) - 1xDVI, 1xHDMI (also GT 620, GT 630) Has anyone had a good desktop dual-monitor Unity 3D experience with ATI cards?

  Read the article

• Bluetooth adapter turned from working fine to unrecognized

  - by easoncxz

  i had been using bluetooth fine, with devices working, but today when i turned on my computer again bluetooth strangely failed. there is a bluetooth icon on the top bar, showing "bluetooth on", but if i click on the "bluetooth settings" item, a system settings window shows up and shows me a bluetooth on-off switch which is disabled (i.e. fixed to off). more information about my case: i am a new linux used, coming from windows, and do not know supposedly-obvious commands. i am using a laptop. it initially doesn't have bluetooth. i bought a built-in type (instead of USB type) bluetooth module, and added it inside the laptop. hence, i do not have a specific FN+* key for bluetooth. in windows, i needed to install an additional driver that was intended for other machines in my laptop's seires which have built-in (i.e. factoryly built-in)j bluetooth modules. the Fn+* key seemed to only affect wifi under ubuntu. i have been successfully using magicmouse with my later-added built-in bluetooth module/adapter on both windows and ubuntu i have been trying to tweak the magicmouse scrolling speed with commands rmmod something, modprobe hid_magicmouse --scroll_speed=45 --scroll_acceleration=30 or something, then added a file `/etc/modprobe.d/magicmouse.conf". the mouse seemed to be working fine with these changes. now if i run commands like hcitool dev, the shell tells me that i do not have any "Devices" or "adapters". i seem to have bluez installed, because when i type "blue" then tab-autocomplete, a bunch of commands like bluez-test-device pops up. -- update -- some commands and their results: easoncxz@eason-Aspire-4741-ubuntu:/etc$ hcitool dev Devices: easoncxz@eason-Aspire-4741-ubuntu:/etc$ hcitool scan Device is not available: No such device easoncxz@eason-Aspire-4741-ubuntu:/etc$ rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: no Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: no Hard blocked: no easoncxz@eason-Aspire-4741-ubuntu:/etc$ rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: acer-wireless: Wireless LAN Soft blocked: yes Hard blocked: no 2: acer-bluetooth: Bluetooth Soft blocked: yes Hard blocked: no

  Read the article

• Can't install Ubuntu on my Windows 7 laptop

  - by Ana

  I tried installing Ubuntu in two different ways: First, I tried the Windows Installer, and it goes well until I reboot the system and, when booting on Ubuntu, I get the error: No root file system defined. Second, I uninstalled wubi by going to to Control Panel - Uninstall Programs - Ubuntu. Then, I booted the laptop from the live CD and selected install. It boots okay but in the screen right after the one that says to make sure you have 4.5 GB available, Internet connection, etc, when I click continue it throws me a message saying that Ubuntu had an internal error and asks me if I want to report the error. After that, I just have a black screen and nothing else! No Ubuntu installed, no boot option to go back to Windows. Nothing! My goal is to install Ubuntu alongside Windows 7 (without the hassle of formatting the computer, creating partition, etc). How can I do it (preferable using Windows Installer)? How can I solve the "No root file system defined" that I encountered when I used the Windows Installer?

  Read the article

• Make alsamixer changes permanent

  - by Mauricio Andrés

  I have installed ubuntu GNOME 14.04 in my macbook Pro 13" mid 2012, and something is wrong with the headphones jack, a red led is on and it just can be turned off with the alsamixer command and muting a special section (I'm sorry for not remember the setting, I'm on OS X for work reasons) I already know how to fix it, but I want to know how to save the setting in the alsamixer, because with every reboot the red led is back. Thanks for the help.

  Read the article

• How do I fix SweetHome3d?

  - by GOOD_GUY

  This is what I get in Terminal. I hope this helps. If not, let me know what I need to provide. Thanks sweethome3d [warning] /usr/bin/sweethome3d: Unable to locate /usr/lib/jvm/java-6-sun/jre/lib/javaws.jar in /usr/share/java Exception in thread "main" java.lang.ExceptionInInitializerError at com.eteks.sweethome3d.j3d.Component3DManager$RenderingErrorListenerManager.setRenderingErrorObserver(Unknown Source) at com.eteks.sweethome3d.j3d.Component3DManager.setRenderingErrorObserver(Unknown Source) at com.eteks.sweethome3d.SweetHome3D.addComponent3DRenderingErrorObserver(Unknown Source) at com.eteks.sweethome3d.SweetHome3D.init(Unknown Source) at com.eteks.sweethome3d.SweetHome3D.main(Unknown Source) Caused by: java.awt.HeadlessException at javax.media.j3d.VirtualUniverse.<clinit>(VirtualUniverse.java:294) ... 5 more

  Read the article

• How to restore Windows 7 MBR without a CD

  - by Brandon Bertelsen

  I have been playing with Ubuntu for a few weeks now, and I'd like to revert my computer back to it's original - factory - defaults. On the computer I have a recovery partition (it's a netbook). I went through the process of recovery and everything seemed fine. However, when I restart the computer I'm presented with grub rescue > Now, my understanding is that when I installed Ubuntu "side by side" it replaced the MBR or something like it, with GRUB. I've read on a slew of forums, that I need to use a Windows Recovery Disk. Here are my issues: a) I don't have a recovery disk, I have a recovery partition - it's a netbook. b) I don't have an external cd drive. What I do have is a USB key that has about 1gb of space on it. Thanks in advance.

  Read the article

• How to fix sound in wolfenstein Enemy Territory

  - by GrizzLy

  I installed wolf:et, and i cant get sound to work. Everything that i have installed is in default paths, i had 10.4 and then upgraded to 10.10 via software update gui. I had sound working in 10.04 with method under 2. I have tried following killall esd; et; esd with that i get ------- sound initialization ------- /dev/adsp: No such file or directory Could not open /dev/adsp ------------------------------------ sudo -i echo "et.x86 0 0 direct" /proc/asound/card0/pcm0p/oss echo "et.x86 0 0 disable" /proc/asound/card0/pcm0c/oss exit with that i get bash: /proc/asound/card0/pcm0p/oss: No such file or directory and indeed i do not have that, i have only sub0 and sub1 in pcm0p I have tried running et with et-sdl-sound script, but with that i get this output in console http://pastebin.com/J7gRU1uh I have probably messed up sdl libraries, could not get sound to work, so downloaded new from debian package site and installed them. Tried setting SDL_AUDIODRIVER="pulse" in et-sdl-sound, looks like i am getting same error as in method 3. pasuspender -- et +set s_alsa_pcm plughw:0 gives me ------- sound initialization ------- /dev/adsp: No such file or directory Could not open /dev/adsp _------------------------------------ Misc: @Oli: i do not know if i am running pulse or esd, how can i check that?

  Read the article

• 11.10 AMD64 alternate installer has broken packages?

  - by Ibrahim

  I'm installing Ubuntu 11.10 from the alternate install ISO because I need to use LVM. Unfortunately, at some point the installer fails because it can't install libpurple0 and ubuntu-desktop because they depend on libsasl2-modules but it's not installable somehow. It also has the same error for xserver-xorg-video-all but I think I could probably live without that one. Kind of annoying that this is broken, I'm guessing maybe if I had internet it would work but right now I'm on a campus network with a captive portal so I can't actually get a network connection without using a browser to log in. Just thought someone should know or maybe I'm doing something wrong. I'm going to try installing 11.04 alternate and then upgrading I guess.

  Read the article

• How do I install on an UEFI Asus 1215b netbook?

  - by Tarek

  I'm trying to install Ubuntu 11.10 on a UEFI netbook Asus 1215b using an USB stick. I created a fat32 efi partition of 100MB, 2GB swap, and 2 ext4 partitions (for root (/ ) and /home, respectively). While installing, Ubuntu switches to CLI and starts running efibootmgr. After a few commands (sadly I don't have a screen grab), it stops displaying text but it's still running judging by the HDD led. Then, there's a weird graphic glitch and the screen turns off (HDD led still indicating activity). Finally, it just stops, but doesn't turn off. Not even a hard reboot works (holding down the power button a few secs). I have to plug the netbook off and remove the battery. After that, it still doesn't boot Ubuntu... Anyway, what can I do? I'm considering following the footsteps here and here. Edit: here is the syslog $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] BUG: unable to handle kernel paging request at 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] IP: [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] PGD 14ecc067 PUD 0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Oops: 0000 [#1] SMP $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CPU 0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Modules linked in: cryptd aes_x86_64 ufs qnx4 hfsplus hfs minix ntfs msdos xfs reiserfs jfs bnep parport_pc rfcomm dm_crypt ppdev bluetooth lp parport joydev eeepc_wmi asus_wmi sparse_keymap uvcvideo videodev v4l2_compat_ioctl32 snd_hda_codec_realtek snd_seq_midi snd_hda_codec_hdmi snd_hda_intel snd_hda_codec arc4 snd_rawmidi snd_hwdep psmouse snd_pcm snd_seq_midi_event ath9k serio_raw sp5100_tco i2c_piix4 k10temp snd_seq mac80211 snd_timer ath9k_common ath9k_hw snd_seq_device ath snd cfg80211 soundcore snd_page_alloc binfmt_misc squashfs overlayfs nls_iso8859_1 nls_cp437 vfat fat dm_raid45 xor dm_mirror dm_region_hash dm_log btrfs zlib_deflate libcrc32c usb_storage uas radeon video ahci libahci ttm drm_kms_helper drm wmi i2c_algo_bit atl1c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Pid: 28432, comm: efibootmgr Not tainted 3.0.0-12-generic #20-Ubuntu ASUSTeK Computer INC. 1215B/1215B $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RIP: 0010:[<ffff880066d44c1f>] [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RSP: 0018:ffff88005e2cbab0 EFLAGS: 00010082 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RAX: 00000000ffe1867c RBX: 0000000000000009 RCX: 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RDX: 0000000000000000 RSI: ffff88005e2cbbea RDI: ffff88005e2cbb40 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RBP: 00000000ffe1867c R08: 0000000000000000 R09: 0000000000000084 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] R10: ffffc9001101ff83 R11: ffffc90011018685 R12: 0000000000000001 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] R13: 0000000000000000 R14: ffffc9001101867c R15: ffff88005e2cbbe1 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] FS: 00007f9cdde13720(0000) GS:ffff880066a00000(0000) knlGS:0000000000000000 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CR2: 00000000ffe1867c CR3: 000000002dace000 CR4: 00000000000006f0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Process efibootmgr (pid: 28432, threadinfo ffff88005e2ca000, task ffff880014f0dc80) $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Stack: $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ffffc90011010000 ffff88005e2cbac8 0000000000010000 ffff880066d4401d $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] 000000000000007c ffff880009e84400 0000000000000090 ffff880066d45738 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ffffc9001101867c ffff880066d4331c 0000000000000009 ffffc9001101867b $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Call Trace: $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815e9efe>] ? _raw_spin_lock+0xe/0x20 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9c2d>] ? open+0x10d/0x1b0 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff8116554b>] ? __dentry_open+0x2bb/0x320 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9b20>] ? bin_vma_open+0x70/0x70 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815e9efe>] ? _raw_spin_lock+0xe/0x20 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811849ee>] ? vfsmount_lock_local_unlock+0x1e/0x30 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff8104303b>] ? efi_call5+0x4b/0x80 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81042a7f>] ? virt_efi_set_variable+0x2f/0x40 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff814bb125>] ? efivar_create+0x1e5/0x280 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9d63>] ? write+0x93/0x190 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff811d9de4>] ? write+0x114/0x190 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81167813>] ? vfs_write+0xb3/0x180 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff81167b3a>] ? sys_write+0x4a/0x90 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] [<ffffffff815f22c2>] ? system_call_fastpath+0x16/0x1b $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] Code: ec 01 75 f0 41 bc 01 00 00 00 e8 e5 fb ff ff e8 e4 fc ff ff 33 c0 44 0f b7 c0 66 3b c3 73 20 41 0f b7 c0 41 0f b7 d0 03 c5 8b c8 <8a> 00 42 38 04 3a 75 0a 66 45 03 c4 66 44 3b c3 72 e2 33 c0 66 $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RIP [<ffff880066d44c1f>] 0xffff880066d44c1e $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] RSP <ffff88005e2cbab0> $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] CR2: 00000000ffe1867c $Oct 21 01:05:17 ubuntu kernel: [ 1220.544009] ---[ end trace 493844b002da4787 ]---

  Read the article

• How to change fonts using gnome-tweak-tool?

  - by john the fatbloke

  As a non-techie type user, I've managed to find the "Advanced Settings" option in the "other" menu listing, which is good (sort of). In the past, I've routinely installed the windows fonts from my windows partition. Now even though I have the msttcorefonts package installed, and all of the .ttf windows fonts installed (as far as I can tell), it doesn't matter whether I log out and back in (which in the past has brought up some of the stuff I've wanted installed), or even if I just restart the Ubuntu completely from boot, none of them are listed. So how do I make the gnome tweek tool see the directory with all the fonts in it please ?

  Read the article

• With respect to gnome-session, what is a "component"?

  - by Alistair Buxton

  Under /usr/share/gnome-session/sessions are files which describe the different types of sessions available from gnome-session. In these files is a list of required components, eg for shell: RequiredComponents=gnome-shell;gnome-settings-daemon; or for fallback: RequiredComponents=gnome-panel;gnome-settings-daemon; This appears to be a list of executables, but it is not. If I change gnome-panel to some other type of panel, the session does not start, and I see the following errors in ~/.xsession-errors: gnome-session[2003]: WARNING: Unable to find required component 'xfce4-panel' So my question: What is a component, how are they defined, and where does gnome-session look for them?

  Read the article

• Permission denied on /dev/xvdf despite sudo?

  - by Sid

  I'm trying to get a stream off port 9999 and write to /dev/xvdf. I'm using Amazon EC2 with the Ubuntu 11.10 server image. By default I log in as 'ubuntu' which has sudo privileges. However, when I run the following netcat command, I get this error ubuntu@ip-10-252-35-122:~$ ls -al /dev/xv* brw-rw---- 1 root disk 202, 1 2011-11-30 22:22 /dev/xvda1 brw-rw---- 1 root disk 202, 80 2011-11-30 22:27 /dev/xvdf ubuntu@ip-10-252-35-122:~$ sudo netcat -p 9999 -l > /dev/xvdf bash: /dev/xvdf: Permission denied ubuntu@ip-10-252-35-122:~$ Any idea why I get the permission denied error and how I can work around it? Update: Something mysterious is running in the background that resets the permissions? Check the snippet below and the permission flags seem to automatically reset when I try using /dev/xvdf !?! ubuntu@ip-10-252-35-122:~$ sudo chmod 777 /dev/xvdf ubuntu@ip-10-252-35-122:~$ ls -al /dev/xvdf brwxrwxrwx 1 root disk 202, 80 2011-11-30 22:43 /dev/xvdf ubuntu@ip-10-252-35-122:~$ sudo nc -p 9999 -l > /dev/xvdf This is nc from the netcat-openbsd package. An alternative nc is available in the netcat-traditional package. usage: nc [-46DdhklnrStUuvzC] [-i interval] [-P proxy_username] [-p source_port] [-s source_ip_address] [-T ToS] [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]] [hostname] [port[s]] ubuntu@ip-10-252-35-122:~$ ls -al /dev/xvdf brw-rw---- 1 root disk 202, 80 2011-11-30 22:43 /dev/xvdf ubuntu@ip-10-252-35-122:~$ I'm using stock Ubuntu Amazon EC2 images from http://alestic.com/ (links to images at the top)

  Read the article

• How do I get fan control working?

  - by RobinJ

  I know there something called fancontrol, that enables you to control the speed of your system's ventilation. I'd like to let my fans spin a bit faster as my laptop is heating up very easilly. All tutorials and stuff I've found are for old versions of Ubuntu and don't seem to be working anymore. Can anyone explain to me or give me a good link on how I can get it working on Ubuntu? Something different with the same effect is also fine.

  Read the article

• Ubuntu 12.04.1 Update Manager and synaptic Package Manager not working

  - by Ashoke

  Recently installed Ubuntu 12.04.1, 64bit on Intel Quad core system. There is a Red Circle with a WHITE 'minus' sign on the upper right hand corner. In the end of a long message displayed below the RED CIRCLE in 'grey' says that INSTALLED PACKAGES HAVE UNMET DEPENDENCIES. None of the following is working. 1. Ubuntu Software Center not opening. UPDATE MANAGER Could not initialize the package information An unresolvable problem occurred while initializing the package information. Please report this bug against the 'update-manager' package and include the following error message: 'E:Encountered a section with no Package: header, E:Problem with MergeList /var/lib/apt/lists/in.archive.ubuntu.com_ubuntu_dists_precise-updates_multiverse_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.' SYNAPTIC PACKAGE MANAGER AN ERROR OCCURED The following details are provided E: Encountered a section with no Package: header E: Problem with MergeList /var/lib/apt/lists/in.archive.ubuntu.com_ubuntu_dists_precise-updates_multiverse_binary-i386_Packages E: The package lists or status file could not be parsed or opened. E: _cache-open() failed, please report. Otherwise, the computer is working fine with broadband WiFi internet. InstallPLEASE HELP.

  Read the article

• How does process priority influence a process

  - by Luis Alvarado - The Wolverine

  Assuming we have read the following question: Change niceness (priority) of a running process and we know about root, non-root permissions: What actually happens when a running process (Through renice) or a new process (Through nice) gets its priority changed to a positive/negative value it previously had. Does it mean more memory is assign to it? Does more CPU power go to that particular process? Does it reduce any timing for resources for that process? What happens when the process priority change?

  Read the article

• How do I install Sublime Text 2?

  - by Michael Gruber

  I installed Sublime Text 2 on 12.04 as per this tutorial. However I don't have adequate permissions when launching the program from the Unity launcher. For example I cannot install packages, or if I add a folder to the sidebar when I close Sublime and reopen, the folder is no longer listed. If I run sudo sublime in the terminal all changes remain after closing. I've tried chown-ing the Sublime Text 2 folder in usr/lib sudo chown -R mylogin:mylogin /usr/lib/"Sublime Text 2" but this seemed to have no effect.

  Read the article

• Installation stops at a black screen on a Dell XPS 15z

  - by user780610

  This is my first time trying to install a Linux distro, and I'm having a bit of a time with it. I've tried to install Ubuntu on my new Dell XPS 15z using the Wubi Windows installer (on x64 Windows 7 Pro) and I've also tried mounting the ISO to a USB drive as explained on ubuntu.com. Unfortunately, both methods hit the same problem: after some text stuff, the screen turns off. I still have control over things like keyboard brightness, so it's not that the computer's going idle or anything like that. Any ideas?

  Read the article

• need to know about type of shell and which is best one?

  - by JK Patel

  i am new in the Ubuntu. And basically i am windows user, so i am searching about the feature of Ubuntu. then i got a word Named"Shell" so i searching about it and i get list of shell so i am confused which shell i use and which shell is generally used. so i want to know about the shell? how many type of shell are available in Ubuntu and which is best one among all@generaly used, featured and simple? thanks in advance!

  Read the article

• Automatically select headphones when plugged in

  - by Joachim Pileborg

  When I plug headphones into my desktop computer, they are not automatically selected for output, instead all sound still goes through my S/PDIF output to the stereo. The headphones alternative is added in the sound settings, and I have to manually select it as output device. $ cat /proc/asound/pcm 00-00: ALC898 Analog : ALC898 Analog : playback 1 : capture 1 00-01: ALC898 Digital : ALC898 Digital : playback 1 00-02: ALC898 Analog : ALC898 Analog : capture 2 I have done a Google search, as well as search askubuntu.com, but none of the answers in the hits I found seems to help. Also, after listening with the headphones and then unplug them, the previous output is not automatically selected, so I have no sound at all then. I have to manually select the correct output in the settings.

  Read the article

• Markdown, LaTeX combined in WYSIWYG editor. Is there any?

  - by om-nom-nom

  I really like the way markdown is implemented in SE bunch of sites, where I can easily write code blocks, performing formatting or even use latex on some of sites like writing $\pi$. I also like how this online editor looks and feels. But it's all online. Is there any offline WYSIWYG analogs of notepag or WMD in Ubuntu that optionally supports pdf as an output format? Both markdown and latex desired. I desire to simultaneously use Markdown and LaTeX. I'm planing to use an editor for writing some technical stuff with math, but it's annoying to be constantly in "LaTeX-mode". So it would be awesome to immerse in LaTeX when I need formulas and use markdown when I need to speak on natural language. UPD. Almost all answers was quite useful, but none of them answers directly on my question. I'll accept @N.N. answer as a most complete.

  Read the article

• How to connect to internet using huawei E303C datacard

  - by Rahul Choudhary

  It is very difficult to use ubuntu. After six hours of research on various websites and ubuntu blogs I was unable to connect to internet using my Huawei DataCard E303C. I wonder that if it takes so much long time to figure out how to connect to internet using a 3g datacard (Huawei E303C) to connect to internet, then how would I do my daily computing tasks using ubuntu. Is there anyone who can help me with that. My personal practical experiences says that using ubuntu instead of windows is not different but tough. Yes it is very tough to use ubuntu. Why it cannot be like we double click and software gets installed as it happens in windows and why we always have to use terminal to install everything. Why everything in ubuntu is very difficult and tough to accomplish. I am drifting away from ubuntu. Can any developer at ubuntu help keep my interest in ubuntu? Is there anyone who can lure me to use ubuntu again?

  Read the article

• How to make ad-hoc network connection?

  - by Johan Nathaniel Soedjono

  I can't make ad-hoc from my netbook (Ubuntu 12.04). It has internet source from ethernet. I have tried making from network manager. But it always says 'Wireless Network Disconnected' and can't be detected by neither my other laptop nor my cell phone which have wifi. How can I make adhoc from it? I have already tried making a connection in Network Manager a lot of times, but it still can't connect and appear notification 'Wireless Network Disconnected'.

  Read the article

• Need database selection advise

  - by jacknad

  I know this is considered a bad question since there is no correct answer, but I need to decide on a database for embedded linux (DaVinci 368 based) hardware and I've never had to produce a design with a database before. Each record will probably contain less than 1000 images with associated alpha-numeric data and the mass storage will be some kind of flash drive. Only one user needs access to the data at a time. MySQL claims to be "The world's most popular open source database" but SQLite claims to be "the most widely deployed SQL database engine in the world." Perhaps there is another that is also the best in the world? Which is easiest to use for a database newbie? Should I just flip a coin? Does it really matter which one I pick? Do I even need to use a database software package or should I roll my own? I won't need bells and whistles like sorting, but I'll probably need to delete the oldest records to make room for new ones if the storage fills up.

  Read the article

• Problem with Bash script: 'declare: not found'

  - by Ashfame

  I had a script which was running fine but when I ran it today, it says declare: not found. I am using bash shell and path at the starting of the script is correct. Two flagged lines in my script are as follows: declare -a RESPONSE RESPONSE=($RESULT) It also says ( is unexpected but I guess that is coming up because of the first error. Worth mentioning point is when I type in declare directly works fine. declare | grep USER shows USER=ashfame USERNAME=ashfame values="$SVN_BASH_USERNAME"; So, whats wrong here?

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >