Search Results

Search found 20447 results on 818 pages for 'f5 big ip'.

Page 191/818 | < Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >

• Open mysql only to localhost and a particular address

  - by Rodrigo Asensio

  My config: ubuntu server 9 and msyql 5 my.cnf = bind-address = 0.0.0.0 my iptables script = iptables -A INPUT -i eth0 -s 99.88.77.66 -p tcp --destination-port 3306 -j ACCEPT I can connect from any place to mysql, not only that IP. I made a iptables-save , /etc/init.d/netwokring restart... but I still can connect from any IP, any clue ?

  Read the article

• Connect to host computer from Virtual PC 2007

  - by Vegard Larsen

  I am having trouble using my guest (Windows XP SP3) to communicate over TCP/IP to the host computer (Windows 7) using Virtual PC 2007. I have WAMPServer running on my host, and want to be able to access the websites on there from my guest OS. What do I do to make this work? What is the IP address of the host computer when using Shared Networking? As far as I can tell "Internal Networking" won't work, because that only allows communication between the guests, not between a guest and the host.

  Read the article

• Exim - Sender verify failed - rejected RCPT

  - by Newtonx

  While checking on Exim's log messages I found many entries of the following message "Sender verify failed" "rejected RCPT" ... I 'm not an exim expert... I'm afraid Exim is not delivering 100% emails to recipients, because our Email Marketing Application its getting a lower OPEN RATE. Can someone helpe understand this log messages? Is it my server saying "No Such User Here" or a remote server? 174.111.111.11 represents my server IP. Thanks Exim log 2010-10-02 14:00:19 SMTP connection from myserverdomain.com.br () [174.111.111.11]:54514 I=[174.111.111.11]:25 closed by QUIT 2010-10-02 14:00:19 SMTP connection from [174.111.111.11]:54515 I=[174.111.111.11]:25 (TCP/IP connection count = 2) 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 Warning: Sender rate 672.4 / 1h 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 sender verify fail for <[email protected]>: No Such User Here 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 F=<[email protected]> rejected RCPT <[email protected]>: Sender verify failed 2010-10-02 14:00:19 SMTP connection from myserverdomain.com.br () [174.111.111.11]:54515 I=[174.111.111.11]:25 closed by QUIT 2010-10-02 14:00:19 SMTP connection from [174.111.111.11]:54516 I=[174.111.111.11]:25 (TCP/IP connection count = 2) 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 Warning: Sender rate 673.3 / 1h 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 sender verify fail for <[email protected]>: No Such User Here 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 F=<[email protected]> rejected RCPT <[email protected]>: Sender verify failed 2010-10-02 14:00:19 SMTP connection from myserverdomain.com.br () [174.111.111.11]:54516 I=[174.111.111.11]:25 closed by QUIT 2010-10-02 14:00:19 SMTP connection from [174.111.111.11]:54517 I=[174.111.111.11]:25 (TCP/IP connection count = 2) 2010-10-02 14:00:19 H=myserverdomain.com.br () [174.111.111.11]:54517 I=[174.111.111.11]:25 Warning: Sender rate 674.3 / 1h 2010-10-02 14:00:20 H=myserverdomain.com.br () [174.111.111.11]:54517 I=[174.111.111.11]:25 sender verify fail for <Luciene_souza_vasconcellos=hotmail.com--2723--bounce@e-mydomain.com.br>: No Such User Here 2010-10-02 14:00:20 H=myserverdomain.com.br () [174.111.111.11]:54517 I=[174.111.111.11]:25 F=<Luciene_souza_vasconcellos=hotmail.com--2723--bounce@e-mydomain.com.br> rejected RCPT <[email protected]>: Sender verify failed

  Read the article

• TOR hidden service - PHP or CGI - what is safely?

  - by Tai Chi Girl

  I want to setup TOR Onion hidden service with non-static pages. What should I use: Php or CGI? What is more safely? I don't want to reveal IP of machine - I live in China and I afraid goverment. I use linux, thttpd as webserver (thttpd, because someone told me, that Apache generate many IP informations in for example 404 sites).

  Read the article

• Availability of downloadable DNSBL dumps?

  - by mtah

  I need to cross-reference data involving a large number of IP addresses against known public proxies, spam-listed IPs etc. For obvious performance and network load reasons, obtaining a regularly updated dump for off-line processing would be preferrable. I currently use http://www.dnsbl.manitu.net/download/nixspam-ip.dump.gz - a digest of ix.dnsbl.manitu.net with 40,000 entries updated every 15 minutes. I'd like something more substantial though, so my question is: does such a thing exist?

  Read the article

• LAN connection problem

  - by Pradi

  how to connect to different system within the lan? im getting messages back when pinged with host ip address and also for default gateway. But messages pinged to another ip address with in my lan are not comming back? please help me out.

  Read the article

• LAN connection problem

  - by Pradi

  how to connect to different system within the lan? im getting messages back when pinged with host ip address and also for default gateway. But messages pinged to another ip address with in my lan are not comming back? please help me out.

  Read the article

• Windows 2008 running as KVM guest networking issue

  - by Evolver

  I have a strange networking problem with Windows 2008 server R2, running as guest under KVM-Qemu host. Host is CentOS 6.3 x86_64. It's network settings: # cat /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE=br0 BOOTPROTO=static BROADCAST=xx.xx.xx.63 IPADDR=xx.xx.xx.4 NETMASK=255.255.255.192 NETWORK=xx.xx.xx.0 ONBOOT=yes TYPE=Bridge # cat /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=xx:xx:xx:xx:xx:xx ONBOOT=yes BRIDGE=br0 IPV6INIT=yes IPV6_AUTOCONF=yes # cat /etc/sysconfig/network NETWORKING=yes NETWORKING_IPV6=no HOSTNAME=my.hostname GATEWAY=xx.xx.xx.1 # cat /etc/sysctl net.ipv4.ip_forward = 1 # tried to set it to 0 without any changes net.ipv4.conf.default.rp_filter = 1 # tried to set it to 0 without any changes net.ipv4.conf.default.accept_source_route = 0 # tried to set it to 1 without any changes kernel.sysrq = 0 kernel.core_uses_pid = 1 net.ipv4.tcp_syncookies = 1 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface xx.xx.xx.0 0.0.0.0 255.255.255.192 U 0 0 0 br0 169.254.0.0 0.0.0.0 255.255.0.0 U 1004 0 0 br0 0.0.0.0 xx.xx.xx.1 0.0.0.0 UG 0 0 0 br0 Node IP is xx.xx.xx.4, guest IP is xx.xx.xx.24, both host and guest is in the same network (/26). There are several linux guest running fine on the node (centos, debian, ubuntu, arch), and even Windows 2003 x86 also running fine. But Win2008 does not. I wonder, what's the difference. From Win2008 guest I can ping nothing: neither gateway, nor any other IP, even they are in the same subnet. From outside I also cannot ping guest. Almost. If I ping it from another server in same subnet, it's barely pinging, losing more than 90% packets. Firewall on the guest is completely off. Tried to set up network manually as well as via DHCP without success (BTW, DHCP set up network settings correctly). I suspect that is a kind of routing problem, but I spent whole day and still cannot figure it out. I would be appreciate for any help.

  Read the article

• how can I reconnect DSL in cisco router 877w

  - by Sulaiman

  Hi All, I've configured ADSL and added a new public LAN ips for the router. How can I reconnect DSL connection and apply the new configuration without executing the command reload this is the commands I am using for DSL configuration config terminal interface dialer 0 ppp chap hostname User ppp chap password 0 Pass exit exit wr mem and this is the commands I am using for adding IP addresses: configure t interface vlan 1 ip address xx.xx.xx.xx 255.255.255.252 Secondary exit wr mem thank you

  Read the article

• Running SUN UDS 5213 on Windows 7

  - by Lebo

  I am getting this error when I try to install Sun ONE UDS 5213 on Windows 7: This Windows NT system does not have TCP/IP installed. Please install the TCP/IP package before installing Sun ONE UDS Please help.

  Read the article

• *Simple* way to block DDoS by number of requests

  - by Eduard Luca

  I have 3 Varnish 3.0.2 servers with Apache 2 as backends, which are being load balanced through a HAproxy separate server. I need to find a very simple program (I'm not much of a sysadmin), which blocks requests from an IP, if that IP has made more than X requests in Y seconds. Would something like this be achievable with a simple solution? Right now I have to block all requests manually with iptables.

  Read the article

• Autohotkey script multiple functions

  - by Vince

  Is it possible to use this bottom script but add a second hotkey and function that goes with it. ;DoOver.ini ;[Settings] ;record={LCtrl}{F12} ;hotkey to start and stop recording ;playback={LCtrl}{F5} ;hotkey to start playback ;keydelay=10 ;ms to wait after sending a keypress ;windelay=100 ;ms to wait after activating a window ;movemouseafter=1 ;move the mouse to original pos after playback 1=yes 0=no [Settings] record={LCtrl}{F12} playback={LCtrl}{F5} keydelay=10 windelay=100 movemouseafter=1 macro={WinActive}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{LCTRL Down}{Right}{Right}{LCTRL Up}{LSHIFT Down}{End}{LSHIFT Up}{LCTRL Down}{c}{LCTRL Up}{MouseClick,L,236,116,1,0,D}{MouseClick,L,54,116,1,0,U}{LCTRL Down}{LCTRL Up}{MouseClick,L,474,64,1,0,D}{MouseClick,L,474,64,1,0,U}{MouseClick,L,451,77,1,0,D}{MouseClick,L,451,77,1,0,U}{MouseClick,L,44,225,1,0,D}{MouseClick,L,44,225,1,0,U} OR playback={LCtrl}{F7} keydelay=10 windelay=100 movemouseafter=1 macro={WinActive}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{Down}{LCTRL Down}{Right}{Right}{LCTRL Up}{LSHIFT Down}{End}{LSHIFT Up}{LCTRL Down}{c}{LCTRL Up}{MouseClick,L,236,116,1,0,D}{MouseClick,L,54,116,1,0,U}{LCTRL Down}{LCTRL Up}{MouseClick,L,474,64,1,0,D}{MouseClick,L,474,64,1,0,U}{MouseClick,L,451,77,1,0,D}{MouseClick,L,451,77,1,0,U}{MouseClick,L,44,225,1,0,D}{MouseClick,L,44,225,1,0,U} Maybe add something like what is printed in bold here. I know the coding isnt right here, but i think this is the best way to describe what I am looking for. Anybody?

  Read the article

• route view for new IPs?

  - by Clear.Cache

  The route view method is not working for me telnet route-views.routeviews.org (logged in with user "rviews") route-viewsshow ip bgp 173.244.44.0 | inc 10464 route-viewsshow ip bgp 173.244.44.0 % Network not in table route-views Am I doing something wrong?

  Read the article

• How to know which program is using the WebClient service?

  - by sork

  Hello, I just found out by using TCPView that one of my svchost.exe had an http connection in "CLOSE_WAIT" to a strange ip address, although no other visible program was running. With the help of Process Explorer I discovered that this svchost was using the WebClient windows service. I'm wondering how I can figure out what program used WebClient to connect to this ip, in order to determine if it's malware.

  Read the article

• Remove key from known_hosts

  - by Adam Matan

  Hi, I have built several virtual machines during the last few weeks. The problem is, the .ssh/known_hosts gives me the Man in the middle warning. This happens because another fingerprint is associated with the virtual machine IP. In the .ssh/known_hosts file, however, I don't seem to find the record related to the IP, only two bizarre, key-like strings and "ssh-rsa". Any ideas how to remove the old key from known_hosts? Thanks, Udi

  Read the article

• Windows Server 2008 R2 network adapter stops working, requires hard reboot

  - by Geoff Dalgas

  TL;DR version: Turns out this was a Windows Server 2008 R2 kernel networking bug. After siccing Microsoft support on it, we (eventually) got an unpublished kernel hotfix from Microsoft to address it. If you, too, are experiencing mysterious low-level network driver failures requiring a reboot/bluescreen cycle, you might want that hotfix (or maybe Service Pack 1 whenever it is released, too.) We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps. Switch Virtualization providers On the off chance this was related to Hyper-V in some way (we do host Linux VMs on it), we switched to VMWare Server. No change. Switch host model We've reached the end of our troubleshooting rope and are now formally involving Microsoft support. They recommended changing the host model: http://en.wikipedia.org/wiki/Host_model http://technet.microsoft.com/en-us/magazine/2007.09.cableguy.aspx We did that, and.. we'll see.

  Read the article

• Obtaining a list of files from a specific directory

  - by Steve Robathan

  I can get a list of files from a text file from a specific directory, but they are naturally in singles. I need to create a text file that will give the contents, but all in 1 line separated by a space. My batch is here: dir /a /b /-p /o:gen %USERPROFILE%\Desktop\file_list_full.txt As an example, this will give: Hello.exe Help.txt Big.png sound.ogg I need it to be: Hello.exe Help.txt Big.png sound.ogg How can I do this?

  Read the article

• Appropriate to Stateless Autoconfigure a Server?

  - by user31498

  I am setting up a network to support IPv6. Stateless Autoconfiguration seems to be the preferred way to get an IP address on an IPv6 network but is this the preferred way for a server? Other machines outside of the network are going to need to be able to talk to the server. Is it preferable to give the server a static IP address or is there something fancy that can be done with DNS to keep track of the server address?

  Read the article

• Can't connect to EC2 instance in VPC (Amazon AWS)

  - by Ryan Lynch

  I've taken the following steps: Created a VPC (with a single public subnet) Added an EC2 instance to the VPC Allocated an elastic IP Associated the elastic IP with the instance Created a security group and assigned it to the instance Modified the security rules to allow inbound ICMP echo and TCP on port 22 I've done all this and I still can't ping or ssh into the instance. If I follow the same steps minus the VPC bits I am able to set this up without issue. What step am I missing?

  Read the article

• Is the recent Java bug something to worry about?

  - by Keith

  Recently saw this announcement on the H blog about a big hole in Java: http://www.h-online.com/security/news/item/Java-exploit-launches-local-Windows-applications-974652.html But I can't seem to get anyone to think it's a big deal. The fact that I cn visit a web site and it runs calc.exe on my local box is just plain scary... Why is there no bigger response to this??

  Read the article

• dlink arp spoofing prevention

  - by Wiploo

  someone can help me understanding arp spoofing prevention on dlink dgs-3100 (ftp://ftp2.dlink.com/PRODUCTS/DGS-3100-48P/REVA/DGS-3100-48P_MANUAL_3.60_EN.PDF). I'd like to protect my gateway MAC/IP from spoofing so I'have tryed to add a rule "IP: 192.168.1.1 MAC: aa-aa-aa-aa-aa-aa" flagging all the port of the switch as untrusted. When I apply the rule I lose connection to all pc attached to the switch. I certanly made some errors, but I can't understand what is wrong. Best Regards

  Read the article

• Making to the DNS on two different VPNs play nice.

  - by NitroxDM

  Setup: I have two separate networks I need to connect to at the same time. VPN 1 PPTP IP : 192.168.2.0/24 DNS : 192.168.2.32; 192.168.2.34 (Windows 2003) Domain : old.com Forwarder : 192.168.2.1 (Gateway running DNS) DD-WRT VPN 2 OpenVPN using Routing -- I'm going to switch to bridging IP : 192.168.10.0/24 DNS : 192.168.10.10 (Windows 2008) Domain : xyz.dc Forwarder : 192.168.10.1 (Gateway running DNS) ClearOS When I'm connected I would like to resolve host names on both networks without fully qualifying them.

  Read the article

• What is the best way to create a failover cluster for my IIS website?

  - by ObligatoryMoniker

  Our eCommerce website www.tervis.com currently runs on two servers: SQL server: 2005 x 86 on Windows Server 2003 Standard x86 with a single dual core processor and 4 gb of memeory IIS server: Windows Server 2008 Web edition x64 with dual quad core hyper threaded processors and 32 gb of memory Tervis.com's revenue has steadily grown to the point where we need to have redundant servers deployed with a fail over mechanism so that we do not have any down time. Because the SQL server is so underpowered compared to the web server my thought was to purchase: 2 x SQL Server 2008 R2 web edition x64 single processor license 2 x Windows Server 2008 R2 Web Edition Licenses 1 x New Physical dual quad core 32 GB server 1 x F5 Load Balancer I need the Windows Server 2008 R2 Web Edition licenses so that I can run SQL and IIS on the same box for both of these servers. The thought is to run this as an active/passive fail over cluster that could be upgraded to an active/active cluster if we purchased the additional SQL licensing. The F5 load balancer would serve as the device that monitors the two servers and if the current active one stops responding then fails over to using the other server. To be clear this is not windows clustering but simply using a load balancer to fail over between two computers so that you now have a cluster in the general sense. Is this really the best way to accomplish what I need? Is there some way to leverage the old server 2003 SQL server to function as the devices that funnels http requests to the appropriate active server and then fails over if a problem occurs? Is there any third party clustering software that might help me accomplish this in a simpler fashion?

  Read the article

• Change interface for doing a whois

  - by Wizzard

  We got 4 ips on our server, and I noticed that one of our IP's appears to be blocked by a big whois providor. Is there a way I can route whois lookups over a different IP - not just eth0?

  Read the article

• Can't get DHCPd to assign IPs to unknown clients

  - by Jakobud

  I'm using Webmin to admin our DHCPd server. But I'm having a hard time getting it to assign IP addresses to unknown clients. The only way I can get it to assign an IP is to make sure a host is added to DHCPd as a host so that it gets a static-lease IP assigned to it. I thought "Allow Unknown Clients" was the key, but it still isn't assigning IPs to unknown clients. I have a pool setup so that the unknown clients should get an IP between 10.20.0.200 - 10.20.0.249. Here is the config file. What am I missing here? allow unknown-clients; # Primary DHCP server config authoritative; ddns-update-style none; failover peer "dhcp-failover" { primary; address 10.20.0.30; port 647; peer address 10.20.0.25; peer port 647; max-response-delay 60; max-unacked-updates 10; load balance max seconds 3; mclt 3600; split 128; } subnet 10.20.0.0 netmask 255.255.255.0 { allow unknown-clients; option subnet-mask 255.255.255.0; option broadcast-address 10.20.0.255; option routers 10.20.0.100; option domain-name "ourdomain.com"; option domain-name-servers 192.168.10.20; default-lease-time 86400; max-lease-time 86400; option ntp-servers 192.168.10.20; option time-offset -25200; pool { allow unknown-clients; failover peer "dhcp-failover"; max-lease-time 86400; range 10.20.0.200 10.20.0.249; deny dynamic bootp clients; } host Server-myserver { option host-name "whatever.ourdomain.com"; hardware ethernet 00:89:D4:35:4F:13; fixed-address 10.20.0.23; } }

  Read the article

< Previous Page | 187 188 189 190 191 192 193 194 195 196 197 198  | Next Page >