Search Results

Search found 16899 results on 676 pages for 'local'.

Page 194/676 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• proxy pass redirection

  - by zam

  I am struggling with a redirection rule. I am now running my Redmine in webrick in port 3000 and proxy-pass it. The URL of my Redmine is xyz.example.com. I also want to redirect the Redmine using the URL: abc.example.com. I added the server alias but no redirection taking place. Here is my configuration: <VirtualHost *:80> ServerName xyz.example.com ServerAlias abc.examle.com ProxyPass / h://local:3000/ ProxyPassReverse / h://local:3000/ </VirtualHost>

  Read the article

• Lan DNS not working after reinstall of Ubuntu 13.10

  - by DrorCohen

  I upgrade my Ubuntu desktop to 13.10. When I say upgrade I mean installed on a new partition from scratch (old partition is available if To the problem: I'm trying to ping a host (Drobo-FS server) by it's host name. I get "Unknown Host". However pinging from another computer on the same lan - works fine (a laptop with 12.04 lts). for that matter every ping from the 13.10 to the local lan by hostname fails, ping with ip works. I don't have a local DNS server but somehow all the other computers in the network find each other by host name - only this new one fails... help appreciated...

  Read the article

• Windows 7 doesn't connect to mapped drives at start up.....

  - by danbo

  We are testing Windows 7 (32bit version) and logon to a windows 2003 domain that runs a logon script whichs maps our drive letters. We have no control over the domain. Of our 7 test users, 5 continually recieve red X's on their network drives after they logon. Double clicking on them connects the drives, however, any aplpication that requires files on the fileserver will fail since it thinks it has no connection to the drive. We have tried several reg edits (Enable Linked connections, KeepConn), we have tried to find information in the event viewer to no avail. We have also looked at any differences in NIC driver versions (none). The other 2 computers that can connect without problem are local admins, but, if we logon to the 5 that have the problem with the local admin credentials we get the red x's as well??? This one is a real head scratcher......

  Read the article

• Exchange and external mail server

  - by Bahrain Admin

  Hi, We have our domain hosted externally with Network Solutions, and our mail server is running from there. We have a branch office in Bahrain and have 3 users who would like to use their email addresses on a local exchange server running at the Bahrain office. The Exchange server is currently only used for internal mail,contacts and calendaring. I've used a third=party program to download the POP3 mail to their exchange accounts. so they can receive mail from outside. The issue is in sending mail using their external addresses. I've setup their exchange accounts to include their external address. But we get an error message stating that the IP is not authorized. I tried putting the local ISP as the smart host, but then we get an error message stating that the Address was rejected. I tried using our own external mail server as the smart host, but then the message "Relaying is denied" comes up. Any suggestions? Thanks Arun

  Read the article

• forward all ports via htaccess to new address

  - by user875933

  I have a chat server running on my local machine that listens to different ports. I want to use the sub-domain of one of my accounts to access it. I intend to manually change the redirect whenever my local machine gets a different ip address. So: chat.example.com:123 would redirect to dynamic.ip.address:123 I am trying to accomplish this with .htaccess and RewriteRule I have tried: RewriteEngine on RewriteRule ^(.*) http://dynamic.ip.address/ [L, R=302] but this doesn't work. When I try chat.example.com:123 nothing happens. When I input chat.example.com into the web browser, I get dynamic.ip.address Is .htaccess the right tool for this? I am using a simple web host that gives me ssh access, but not much more.

  Read the article

• exim sending mail to wrong mail server

  - by Chris Bull

  I have recently taken over management of a server running centos and whm. It has several websites and domains running under reseller accounts. Email has always been on a server at our actual office. I have recently changed our email from our local email server to gapps for business (our local email server was pretty archaic). However, when any email is sent from the web server (such as wordpress etc) to our domain - it still routes it to the IP of our old email server. I am not very familiar with WHM or exim so don't really know how to address this. Email to other domains works fine and the gapps is working perfectly. Any help is much appreciated.

  Read the article

• How to run scripts within a telnet session?

  - by wenzi

  I want to connect to a remote host using telnet there is no username/password verification just telnet remotehost then I need to input some commands for initialization and then I need to repeat the following commands: cmd argument argument is read from a local file, in this file there are many lines, each line is a argument and after runing one "cmd argument", the remote host will output some results it may output a line with string "OK" or output many lines, one of which is with string "ERROR" and I need to do something according to the results. basically, the script is like: initialization_cmd #some initial comands while read line do cmd $line #here the remote host will output results, how can I put the results into a variable? # here I want to judge the results, like if $results contain "OK";then echo $line >>good_result_log else echo $line >> bad_result_log fi done < local_file the good_result_log and bad_result_log are local files is it possible or not? thanks! NOTE: I can't control B, I can only run initial cmds and cmd $line on B

  Read the article

• What does the red x icon mean next to a user in folder permissions (Windows 7)

  - by Scott Szretter

  In trying to debug various strange issues on a machine, I found something strange - when I go to C:\Users\administrator and get properties, security tab, it lists the users (the local admin account, system, and 'administrator' which is the domain administrator account). It all looks fine in terms of permissions (full control, etc.) compared to other machines. The one difference is there is a small red circle with an X to the left of the user icon/name. Additionally, there are various folders where it says access denied under there - for example, my documents! Even logged in as the local machine administrator account (which is not named administrator), I am unable to change the permissions - it says access denied. Any ideas what this means and how to fix it? I even tried re-joining the machine to the domain.

  Read the article

• File Adapter FileName Macros

  - by IntegrationOverload

  I can never find these when I need them...   Macro name Substitute value %datetime% Coordinated Universal Time (UTC) date time in the format YYYY-MM-DDThhmmss (for example, 1997-07-12T103508). %datetime_bts2000% UTC date time in the format YYYYMMDDhhmmsss, where sss means seconds and milliseconds (for example, 199707121035234 means 1997/07/12, 10:35:23 and 400 milliseconds). %datetime.tz% Local date time plus time zone from GMT in the format YYYY-MM-DDThhmmssTZD, (for example, 1997-07-12T103508+800). %DestinationParty% Name of the destination party. The value comes from the message context property BTS.DestinationParty. %DestinationPartyQualifier% Qualifier of the destination party. The value comes from the message context property BTS.DestinationPartyQualifier. %MessageID% Globally unique identifier (GUID) of the message in BizTalk Server. The value comes directly from the message context property BTS.MessageID. %SourceFileName% Name of the file from where the File adapter read the message. The file name includes the extension and excludes the file path, for example, Sample.xml. When substituting this property, the File adapter extracts the file name from the absolute file path stored in the FILE.ReceivedFileName context property. If the context property does not have a value, for example, if a message was received on an adapter other than the File adapter, the macro will not be substituted and will remain in the file name as is (for example, C:\Drop\%SourceFileName%). %SourceParty% Name of the source party from which the File adapter received the message. %SourcePartyQualifier% Qualifier of the source party from which the File adapter received the message. %time% UTC time in the format hhmmss. %time.tz% Local time plus time zone from GMT in the format hhmmssTZD (for example, 124525+530).

  Read the article

• Outlook 2010 + Move IMAP PST file = Outlook data file cannot be accessed

  - by GWB

  I set up a new IMAP account in Outlook 2010. It works but creates IMAP PST file in C:\Users\User\AppData\Local\Microsoft\Outlook. I want the file on my data drive in D:\Users\User\Documents\Outlook Files (the same folder where outlook automatically creates the local Outlook PST. I followed the instructions here to move the IMAP PST. Testing the account (send/receive) works fine, but if I try to manually send an email I get error 0x8004010F Outlook data file cannot be accessed. I've tried repairing the PST using SCANPST (it always finds errors), and deleting and recreating the account but I get the same error. If I move the PST file back, it works again, but this is not ideal. Note: I don't think this is a duplicate of this question as the cause is different and the solution does not help.

  Read the article

• Remote Desktop Problem on Windows Server 2008 R2

  - by lukiffer

  Revised this question to be more concise, consolidating several revisions. Symptoms: From a domain-member Windows 7 Client: Domain credentials to a domain controller = success Domain credentials to a member server (by hostname or FQDN) = success Domain credentials to a member server (by IP) = fail Local credentials to a member server (by either) = success From a non-domain-member Windows 7 Client: Domain credentials to a domain controller = success Domain credentials to a member server = fail Local credentials to a member server = success (Identical behavior from a Mac RDC 2.1 client) Server Configuration Details: Windows 2008 R2 Datacenter w/ SP1 The domain in question is a subdomain of a Windows 2008 domain (forest root). Root has DCs in both Site A and Site B, subdomain only has DCs in Site B. RDP is operating normally on all root member-servers and DCs. No remote desktop settings are defined by GPOs. Network level authentication is enabled; all clients are compatible and the certificate exchange/SSL handshake completes successfully. Not catching any errors in netlogon log.

  Read the article

• Run command on startup / login (Mac OS X)

  - by Wolfy87

  I was not sure if this was for StackOverflow or here, I settled for here. I was wondering which file I should place this bash command in so it will be run on startup. # Start the MongoDB server /Applications/MongoDB/bin/mongod --dbpath /usr/local/mongo/data --fork --logpath /usr/local/mongo/log I have been scouring the net and think it is between ~/.bashrc, ~/profile, /etc/bashrc, /etc/profile or ~/.bash_profile. Although I have tried these and they seem to run on terminal startup not Mac startup. Am I missing a file here? Thanks for any help you can give.

  Read the article

• Why does Postfix deliver mails locally instead of relaying them to Google Apps?

  - by user40388

  I get the following error trying to send an email to my Google Apps Email at [email protected] from my Postfix server. to=, relay=local, delay=0.09, delays=0.07/0/0/0.02, dsn=5.1.1, status=bounced (unknown user: "admin") Is there a way I can force it to not use the LOCAL relay and treat [email protected] as outside email and not look for a user in the current postfix configuration. I am trying to email the full email address "[email protected]" not only "admin". I have the Google Apps MX record on mydomain.com + SPF record which before was: v=spf1 include:_spf.google.com ~all (emailing to [email protected] used to work with that record) But I had to change it to v=spf1 a mx ip4:MY.IP.HERE include:_spf.google.com ~all

  Read the article

• /usr/bin/mandb: can't search directory

  - by tfe

  Today I got this email from my debian server: test -x /usr/sbin/anacron || ( cd / && run-parts --report /etc/cron.daily ) /etc/cron.daily/man-db: /usr/bin/mandb: can't search directory /usr/local/share/man/man1/: Permission denied Can me tell somebody what does it mean? I didn't change any permissions: drw---S--- 2 root staff 4096 Jun 28 14:05 man1 P.S Directory /usr/local/share/man/man1 contains 1 file: csf.1. Yesterday (Jun28) CSF/LFT was updated automatically. How do I fix this problem?

  Read the article

• How can I make my PHP development environment more efficient?

  - by pixel

  I want to start a home-brew pet project in PHP. I've spent some time in my life developing in PHP and I've always felt it was hard to organize the development environment efficiently. In my previous PHP work, I've used a windows desktop machine and a linux server for development. This configuration had it's advantages: it's easy to configure Apache (and it's modules)/PHP/MySql on a linux box, and, at the time, this configuration was the same like on production server. However, I never successfully set up a debug connection between my Eclipse install and X-debug on server. Transferring files from my local workspace to the server was also very annoying (either ftp or Bazaar script moving files from repository to web root). For my new setup, I'm considering installing everything on my local machine. I'm afraid that it will slow down workstation performance (LAMP + Eclipse), and that compatibility problems will kick-in. What would you recommend? Should I develop using two separate machines? On one? Do you have experience using one of above configurations in your work?

  Read the article

• Distributed filesystem for automated offline data mirroring

  - by Petr Pudlák

  I'd like to achieve the following setup: Every time I connect my laptop to a local network, my partition gets automatically mirrored to a partition on my local server. I only want to mirror what has changed from the last time. (I understand that it is not a proper backup solution since there is no history of the changes, it'd be more like a non-persistent network RAID.) Is there a distributed file system that allows such a setup? I've done some searching and it seems to me that most distributed file-systems are focused on data availability and distribution, not duplicating them. I'd be thankful for suggestions. Edit: Sorry, I forgot to mention: I'm using Linux.

  Read the article

• Is it possible to pick out what applications that should run through a VPN in Ubuntu 9.10

  - by user31257

  Hi, I'm using Ubuntu 9.10 and I'm wondering if it is possible to pick out what applications that should use a VPN. Say for example that I want to route Transmissions connection through a VPN, but I also want to be able to access my computer over SSH via my usual static IP-adress ( running the SSH- deamon over my normal internet connection) . Is there anyway to do this? As I've been searching the web I found that at least it is possible to set whether you want both your internet connection and your "local network" to go through the VPN or if you want just the "local network" to go through it. I'm using the network-manager-pptp with the pptp- protocol.

  Read the article

• RDP Clipboard File transfer in Windows Server 2008 R2

  - by user67126

  Hallo, i dont like the "new" Feature in Windows 2008 R2. We had some Terminalserver and there Work a lot of Users. If the User anable the Clipboard Funktion in his Remote Desktop Connection, the user can copy a file from the RDP Connection to his local Computer and the other way arround. I search a possibility to copy & paste (only Text/Pictures) between the RDP Connection and the local Machine like Windows 2003 and no Files. Andybody an Idea. Thanks Greetings from Germany

  Read the article

• How do I turn of "auto-echo" in bash when I 'cd'?

  - by Avery Chan

  I don't know when this started happening but now, every time I cd to a directory it echoes the path right before it changes directories. This happens when I log into a server but doesn't happen on my local machine. The server is running Linux. My local machine is running Mac OS X. I searched the Google as well as looked at the bash man page but I couldn't find anything. My .bashrc/.bash_profile doesn't have anything related to 'cd' (that I know of). How do I modify this "feature"?

  Read the article

• bottle.py on EC2 micro instance causes 2 order of magnitude slowdown

  - by user61633

  Cross-posted from StackOverflow: I wrote a little toy script to solve this type of game, and put it on my new micro EC2 instance. It works perfectly, but while it takes around 0.5 seconds to run a local version, and takes under 0.5 seconds to run both the local and the bottle.py version on my home computer, running the bottle.py version on the EC2 instance takes over 2 minutes. Python has the cpu pegged at 99% the entire time. Only 7.4% memory usage, consistently, and no swapping. The only guess I have is initialization time for bottle.py on EC2, but if it were that, why would it be ~200x faster on my own computer with bottle.py?

  Read the article

• rsync synchronizing files only without creating folders on destination

  - by Vincent

  Is it possible with rsync to not create directories on destination? Imagine I have that source : a/ a/x.txt b/ b/y.txt And that I have this destination : a/ a/z.txt The wanted result of rsync source destination : a/ a/x.txt a/z.txt Of course my real situation involves thousand files/folders structure and I don't want solutions involving explicit list of synced folders, which I can do. I'm looking for a clean way just to prevent any folder creation on destination. By exclude or filtering... That could even be something outside rsync, like a hack with permissions if rsync can't do this... For information, this is really easy to get this kind of situations, in my case I have: A server with 2 disks, let's say A & B. And a local drive C. I usually use rsync to sync (and merge) remote A & B into local C. Then sometimes I just want to sync back some C files into A and B. (Just new Files... not non-existing folders on destination)

  Read the article

• How can I view a .eml file from command line in Windows Vista?

  - by Nosrettap

  Ok, so my parent's computer crashed (horribly - corruptedRegistry) and I'm trying to access one of their e-mail files that is saved locally on the hard drive. I can't launch Windows itself so right now I am in a "bootup command prompt". I've navigated to where the e-mail appear to be stored C:Users\[userName]\AppData\Local\Microsoft\Windows Mail\Local Folders\Inbox and it shows a list of what appear to be the files. The problem is, they are .eml files and I can't seem to be able to open them. I've tried 'vim' and 'vi' commands but it tells me that 'vim is not recognized as an internal or external command. Does anyone know how I can view .eml files from command line? Thanks

  Read the article

• Best way to log internet traffic for office network via remote IP

  - by buzzmonkey

  We have a network of about 40 machines running either Win XP or 7 in our office via LAN switches into 1 x Netgear Router (WNDR3700). We have noticed recently that our local network has been added to the CBL Blacklist due to one of our machines being infected with Torpig. I have attempted to use Kaspersky's TDSSKiller Antirootkit Utility to find the infected machine but all appear to be clear. The CBL register advises to find the local machine which is connection to the remote IP address (CBL has provided the range). However, our router does not have the ability to block remote IP addresses - does anyone know of a software which can log all the internet traffic, which we can then use to find the infected machine.

  Read the article

• Oracle 11g network configuration

  - by Kylo

  Hi, I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

  Read the article

• Setting JAVA_HOME on Ubuntu 10.x

  - by user20285

  I'm trying to get the Rhodes framework installed so I can develop Android apps. This requires that I install the SUN JDK and add JAVA_HOME and JAVA_HOME/bin to path. I thought I could solve this by editing my bash.bashrc file: JAVA_HOME="/usr/lib/jvm/java-6-sun/jre/bin/java" export JAVA_HOME PATH=$PATH:$JAVA_HOME/bin This still doesn't work, because when I run: rake run:android I get a prompt in the console that says the Java bin was not found in my path. However, running echo $PATH gets me: usernamee@ubuntu:~$ echo $PATH /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/username/ruby/gems/bin:/usr/lib/jvm/java-6-sun/jre/bin/java/bin:/home/username/ruby_files/android-sdk-linux_86/tools What are my options here? Edit: If the problem is not the export statement, how can I ensure that the Sun JDK is properly installed and that I am, in fact, pointing to the correct path in bashrc?

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >