Search Results

Search found 9542 results on 382 pages for 'operating systems'.

Page 194/382 | < Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >

• Raid recovery in gigabyte GA-8I945 Pro

  - by epeleg

  This was a working machine until a few days ago. And now it won't boot into the OS, during startup if makes clicking sounds (I think from one of the drives). Installed OS: Windows 2003 Web edition Hardware: Gigabyte GA-8I945P Pro , 2*160G Sata in RAID1 configuration , 2 Volumes – 25G and the rest. When I installed windows on it, during setup, I pressed F6 and used ICH7DH drivers of RAID. The manual for the MOBO says: Step 1: After the POST memory test begins and before the operating system boot begins, look for a message which says "Press to enter Configuration utility" (Figure 4). Press CTRL+ I to enter the RAID BIOS setup utility. But the machine never shows this message. BIOS SATA RAID/AHCI Mode is set to RAID. Any ideas or pointers on what I can do to recover my data? Thanks

  Read the article

• Enabling SFTP Access within PLESK

  - by spelley

  I have a client who wants to ensure his upload is secure, so we are trying to enable SFTP for him on our Linux PLESK server. I have enabled SSH access to bin/bash for FTP accounts, and created a new user. When I attempt to SFTP using either the IP address or the domain name, this is the error FileZilla is giving me: Error: Authentication failed. Error: Critical error Error: Could not connect to server Here is some basic information regarding the server: Operating system Linux 2.6.24.5-20080421a Plesk Control Panel version psa v8.6.0_build86080930.03 os_CentOS 5 I had read in some places that I should reboot the SSH Service in Server - Services, however, there is no SSH Service within the list. I'm not really a server guy so it's quite possible I'm missing something obvious. Thanks for any help that you guys can provide!

  Read the article

• Best way to reformat/recover in Windows when your CD key is no longer valid?

  - by CSarnia

  I have a copy of Windows 7 Professional that I have downloaded from the MSDN e-academy (thanks to my school). Now, the problem is that these license keys are one-use only. If I need to reformat or do a factory reset, what is the best way for me to do so, without invalidating my license and screwing me out of an operating system? Edit: I would also like to know some information on the "restore to factory settings" option in Windows 7 recovery center. Does it do exactly as the name implies and starts you off as if you had just done a fresh install? If I had some kind of nasty trojan or virus, would it be able to survive through the factory reset? The recovery center also has an option for reformatting, though I don't think that it's an actual format - it just backs up your stuff into a Windows.old folder or something like that. Does that require a valid license key?

  Read the article

• Webcam on Sony Vaio on Win 7 problem

  - by Norm

  Anyone know where I can get a Win 7 32Bit driver for my Web Cam (Vaio VGN-CR11H/B) ? I changed operating system from Chinese Vista to English Win 7 Update: Windows 7 will not detect the cam, but I just read the Sony Europe site and it gives me some ideas to try. I can dual boot this Sony laptop: with Chinese Vista, the camera works but IE8 does not work. I cannot read Chinese to fix the Internet access issue, but I can get the computer online and Skype works. When I boot with the new Win 7, IE 8 works great, but the cam doesn't work (mic and speakers work). Very perplexing problem.

  Read the article

• Restreaming video from XSplit to multiple JustinTV/TwitchTV channels in different resolutions and bitrates

  - by lmojzis

  I have a really simple question but the answer may be a little more complex I guess. Okay. Let's go. I have an Application called Xsplit Broadcaster (http://www.xsplit.com/). It supports streaming video through RTMP. Now what I want to do is this: +--(720p)--> TwitchTV FirstChannel XSplit --(720p RTMP)-->[MyTranscodingServer]--+ +--(360p)--> TwitchTV SecondChannel Is there a simple way to do this? Additional info: Both channels accept standard RTMP stream on their RTMP endpoint using either username/password or streamkey. The server operating system is GNU/Linux

  Read the article

• In Ruby, how does one get their IP octet without going through DNS?

  - by user30997

  I can, on some of my systems, get my IP address (192.68.m.n format) by doing this: addr = IPSocket::getAddress(Socket.gethostname()) ...the trouble is that this only works if the name the local machine uses for itself is the name the DNS server associates with it. How *&#( hard can it be for ruby to just return its primary interface's IP address? I have to do this in a platform-independant way or I'd just call ifconfig or ipconfig and parse it.

  Read the article

• Sharing authentication between forum and main CMS in Rails

  - by Newy

  I have a Rails forum product that resides under the subdomains of my customers (i.e. http://forum.customer.com). Their main site has a CMS and an authentication system, and my forum product has a separate authentication system. Is there an elegant way to have "cross-signins" across these systems? I want someone already logged into the main CMS to seamlessly (as possible) transition into my product.

  Read the article

• Dell PowerEdge 6850 Degraded HDD

  - by Matt

  Good Morning, We have a dell power edge 6850 with a degraded drive in the RAID array. I have never had to recover such an issue, so any help or advice would be welcome. Basically it hasn't affected the server at an operating system level, but has slowed down performance, I have a replacement drive in hand but as this is our main database server I want to proceed with extreme caution. My options as I see them are - Can I just hot swap the degraded drive with the new one and the data will automatically re-sync and we are all back to normal presumably this is dependant on the current raid configuration? reading various comments on-line I may need to re-configure the RAID array and re-build the broken drive? This screams disaster to me with the main worry being that I wipe any other data. Option 1 would of course make my day. Thanks in advance

  Read the article

• Why is git better than Subversion?

  - by Ben Mills

  I've been using Subversion for a few years and after using SourceSafe, I just love Subversion. Combined with TortoiseSVN, I can't really imagine how it could be any better. Yet there's a growing number of developers claiming that Subversion has problems and that we should be moving to the new breed of distributed version control systems, such as Git. Can anyone explain how Git improves upon Subversion?

  Read the article

• Text template or tool for documentation of computer configurations

  - by mjustin

  I regularly write and update technical documentation which will be used to set up a new virtual machine, or to have a lookup for system dependencies in networks with around 20-50 (server-side) computers. At the moment I use OpenOffice Writer with text tables, and create one document per intranet domain. To improve this documentation, I would like to collect some examples to identify areas where my documents can be improved, regarding general structure and content, to make it easy to read and use not only for me but also for technical staff, helpdesk etc. Are there simple text templates (for example for OpenOffice Writer) or tools (maybe database-driven) for structured documentation of a computer configuration? Such a template / tool should provide required and optional configuration sections, like 'operating system', 'installed services', 'mapped network drives', 'scheduled tasks', 'remote servers', 'logon user account', 'firewall settings', 'hard disk size' ... It is not so much low-level hardware docs but more infrastructure / integration information in these documents (no BIOS settings, MAC addresses).

  Read the article

• How to associate a file extension to a program without making it the default program

  - by CharlesB

  I'm deploying a small conversion tool on some systems, and want the users to be able to run it from the right click Open with menu. But I don't want to change the default program users have associated to this file type. It is easy to associate a file extension/type to a program, but how to do it without changing the default program?

  Read the article

• How to make a quiet laptop?

  - by psihodelia

  Most modern laptops have very noisy fans. I am looking for a quiet laptop or a small stationary computer which has all its hardware built in a display. Most tasks will be PDF/docs processing, real-time audio processing, web-surfing and Skype video chats. Certainly, there is no any fan-less model today; but maybe some of the existed laptops do not switch on their fans so often or implement different solutions? For example, an iPad has no fan at all and it is fast enough for my needs, but it has no normal operating system, so I can't use it for anything but audio chats and web-surfing. Or maybe I can buy a laptop and tweak it to make it absolutely noiseless? Can you recommend any solution please?

  Read the article

• Windows (7 & Vista) laptop monitor does not come back after closing lid

  - by Scott Vercuski

  I'm experiencing an issue with Windows Vista (and now Windows 7) with my laptop. When I close the laptop lid the monitor goes blank but will not come back on after I re-open the laptop. The screen stays blank and nothing that I do will get it to come back. The laptop is an HP DV9000 series. Has anyone else ran into this issue? One of the solutions I've seen online is to go into the device manager and replace the lid driver with something nonsensical (the website suggested pointing the driver at the sound recorder). This does solve the problem by disabling the lid but doesn't really resolve the root issue. I'm asking if anyone has any method I can use to debug what's going on. How do I tell if it is an operating system issue vs. a malfunction within the lid itself. I'd actually like the lid to function as it's meant to. Thank you!

  Read the article

• How Is A SAN Storage Device Managed? [closed]

  - by slickboy

  Apologies if this is a stupid question but my only previous experience with SAN technology is using a SAN virtualisation tool (StarWind iSCSI SAN Free). This tool comes with a management interface that allows for iSCSI targets to be configured on the simulated SAN that can then be accessed. My question is basically: How is physical SAN device managed? Is an operating system required to be installed on the SAN device and then managed via software? Or can it be managed remotely via an application with no OS on the device? Thanks for any help.

  Read the article

• Laptop is super slow on network

  - by Gary

  So on our network we have a bunch of wireless macs and window Operating laptops, we have a network setup with 802.11g,b,n. All the laptops seem fine except one which is only getting speeds of 54Mb. I have changed the encryption from AES to TKIP and reset the connection, i have updated the drivers, tried plugging it into the LAN and still same slow speed. Apparently the laptop with the slow speed is fine on other networks. I don't know what to do, can anyone help me?

  Read the article

• Custom membership provider via WCF authorization question

  - by Diego

  I've made a global authentication via WCF to use with the most of our systems, but found that load data via WCF not very so fast. What I need to do now is verify every time that the page is loading if the user has access granted to that page.... Its a good pratice to go back in WCF request this info for every page that the user access?This will not slow down my entire system?

  Read the article

• How to format the not used OS partition?

  - by Eslam

  I have two operating systems on two different partitions, & I want to format the not used partition. When I right-click on it to choose format, the formatting process doesn't complete & a message appears saying (windows was unable to complete the format). So I need to know another way to format this partition Note: I use windows xp sp2, & i use partition (D) & i want to format the (C) & i don't know how to do that through command line, if it possible i will be so grateful Thanks

  Read the article

• Passion to learn

  - by rajivpradeep

  Hi, I want to learn C , UNIX and LINUX, and more about embedded systems. Very much interested in them. Are there any online courses or websites which can guide me. And please suggest books to read in learning them. Thanks for your time.

  Read the article

• CPU clock scales down so computer is unusable after switching to battery

  - by Ryan

  When I am plugged in my laptop runs great however when I unplug it and I'm on battery power my CPU clock speed scales down pretty much all the way. I know this is happening by monitoring the clock speed. When plugged in it will usually stay between 1000MHz and 3000MHz but when I unplug it it quickly scales down to less than 500MHz and will get as low as 100MHz and it will NEVER scale up at all on battery power. After I plug the power back in it will then begin operating normally in about a minute. I have tried setting the MIN and MAX CPU performance in power options to 100% and have tried messing around with cooling settings which seemed to be a problem with HP laptops. I have a Toshiba Satellite M500-ST6444 running Windows 7. The BIOS is up to date. I have tried two versions.

  Read the article

• Strange issue with 64 bit OS

  - by Sherwin Flight

  So I own two versions of Windows 7, one is 32 bit, the other is 64. The 64 bit version came with my new desktop, and the 32 bit version came with my Laptop. I was doing a clean install of my laptop, and the install went smooth, Windows is up and running! However, after installing it I realized that I accidentally used the 64 bit installation disk instead of the 32 bit version. I confirmed this in the System Information screen, it says: System type: 64-bit Operating System As far as I knew this laptop was only a 32 bit machine. My understanding is that a 64 bit OS would NOT run on 32 bit architecture. Am I correct with this assumption? If this was a 32 bit laptop is there any way a 64 bit OS would even run at all on it?

  Read the article

• How to setup a fast VPN server

  - by Saif Bechan

  I am trying to set up a VPN that has a fast download speed. The server I have is a linux server and from there I can download 2 megabytes a second. At home I can also download with 2 megabytes a second. All the downloads I do are from the same source, no different server. Now I have set up a VPN connection between my home and the server, and now I am only downloading 64 kilobytes a second! The connection I have created is a PPTP server on a debian machine. Now my question is if it is possible to optimize this connection. Should I maybe switch to OpenVPN, or change operating systems? Or are there some kind of settings to tweak to make the connection optimal. PS. The server I am running is on a XEN node. I have done the proper ip forwarding.

  Read the article

• Start app from within python

  - by Aaron Hoffman

  Hello, I'm trying to start an application using Python. I've seen that some people use startfile but I also read that it only works with Windows. I'm using Mac systems and hoping for it to work with them. Thanks, Aaron

  Read the article

• Connecting a print/file server with no wired access

  - by PeanutsMonkey

  We currently have a printer server which also serves as a file server. The server is located on premise however is not close to any wired access point i.e. a patch panel or point. The server also requires access to the Internet as it transmits files across. We have a wireless modem and a wireless router. I can run a cable between the server and wireless router. How can I have the wireless router communicate with the wireless modem? If the operating system of the server is concerned, it is running Windows Server 2003.

  Read the article

• Run disk error check on NTFS file?

  - by paulius_l

  I have a feeling that my system hard drive is dying. Benchmark kind of enforces it. Here is the benchmark of my system hard drive during low system activity: And here is the benchmark of backup drive: Furthermore, there are some files which I just can't touch because I get CRC errors and the hard drive activity spikes to 100% with operating speeds less than 1 MB/s while working with such files. I haven't yet tried swapping SATA cable as I have read this might cause the problems. Anyway, I would like to run some tests on specific clustsers where those files I am interested in are stored. I don't want to do the full chkdsk because it takes a very long time. I would like to either find the utility which executes the disk check directly on the clusters where the file belongs or a couple utilities where one tells me the cluster locations and another can check just those locations. How do I check and possibly fix disk errors where the files I am interested in are stored? Edit: S.M.A.R.T. info:

  Read the article

• What customer support alternatives like groovehq i can use for a site

  - by rmarimon

  I've been experimenting with GrooveHQ as a means to provide support to my clients. They have a very nice idea and have developed it beautifully. At the end is just a ticketing system with multiple channels to communicate with your clients. It is like the rt of our times. What I'm looking for is for other providers of this hosted multi channel ticketing systems. I'm not sure if this belongs in SO but hey...

  Read the article

< Previous Page | 190 191 192 193 194 195 196 197 198 199 200 201  | Next Page >