Search Results

Search found 20264 results on 811 pages for 'home networking'.

Page 196/811 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

• Aircrack-ng Usage on Windows (XP) -- Needs clear steps

  - by Alvin

  I've found that Aircrack-ng is very powerful tool for wireless hacking. But it is a bit complicated to use (even with its documentation). Also, when I run the GUI, it needs to add a "capture file". What is that? Additionally, it says Windows version is weaker than the Linux version. So how can I get it to run like a Linux version? What are some step-by-step instructions (to use on Windows XP)?

  Read the article

• Superscope DHCP leases and configuration set up

  - by Vdub

  Hello I wanted to see if someone could help with a network problem I am having. Right now we have a super-scope and scopes of 192.168.50.1 and 192.168.51.1, as of now both are activated but only 192.168.50.1 is handing our leases, 192.168.51 wont. here is a summary of our network Gateway: watchguard firebox x750e for our router/gateway at 192.168.50.1 I set up as a secondary IP address 192.168.51.1 Server: Server 2008 r2 standard, running our DNS @ 192.168.50.242 and 8.8.8.8 as a secondary, AD, and DHCP. On that NIC card i have 192.168.50.242 as the IP address and 192.168.51.242 as a secondary. 192.168.50.1 as the default gateway and 192.168.51.1 as a secondary. Im am not very knowledgeable at this but as far as i have researched after adding a super scope and activating scopes, they should automatically start handing out addresses and I cant figure out why only one does. any help at all would be appreciated.

  Read the article

• Ubuntu problem not connecting to wireless or wired network

  - by ToughPal

  I recently installed openvpn and things were working. But I got a weird screen after a few hours and on restart my wired and wireless connections are not working. Can someone help? cat /etc/network/interfaces auto lo iface lo inet loopback cat /etc/resolv.conf #Generated by NetworkManager Is there anything missing? I tried both wired and wireless and both are not working. Usually if I ever have a problem with wireless, the wired always work! My /etc/network/interfaces is looking wrong. Can you please send me yours? I am using ubuntu 9.10 and the internet was working correctly until today! Please help

  Read the article

• Bridging two connections in windows 7

  - by Serban Razvan

  I have recently bought an Samsung UE32ES5500 and I want to connect it to the internet. Not wanting to buy an expensive Samsung wireless adapter for the TV, I've decided to use an ethernet cable. Because the Internet cable passes through underground to the bedroom and the TV is located in the living room, i decided to put a router in the bedroom, and receive it's signal in the living room using a windows 7 laptop. Afterwards I connected the laptop to the TV through an ethernet cable, and bridged the two connections in Network Connections in Control Panel on the laptop. The TV successfully finds the laptop (and the router I think) but still cannot connect to the internet. Does anyone knows a solution to this problem? (the connections must be bridged because I want to have only one network in the house)

  Read the article

• How to build a private Wi-Fi Network server with VMware?

  - by Maarten Schermer

  For a school project, we have to build a Private network with VMware vSphere , which we can connect to with a Username and Password. On the network we want to create a folder for each Useraccount. Also we must have add a few groups (Admin,Customer,Manager). We must be able to connect to our network via the school Wi-Fi. We want to build a safe and secure network, with an easy way to access the network. Do you have any tips on how to approach this?

  Read the article

• How frequent are network partitions on cloud services?

  - by roja

  Much is made of the CAP trade-off for data storage where conflicts can be introduced if there is a network partition. My question is there any evidence that this is a problem that arises with any significant frequency in modern cloud IAAS services e.g.; EC2, Azure, Rackspace. Is it a problem which, despite being a theoretical roadblock in constructing idealised distributed systems is, in fact, a non-issue for all practical concerns? Has anyone experienced a network partition within one of these systems (within a single data-centre?) If so would you be willing to share any details?

  Read the article

• Linux will not activate wireless after device has been re-enabled

  - by XHR

  Using a Eee 900A netbook by Asus. By pressing Fn + F2, I can disable or enable the wireless chip on the netbook, a blue LED indicates the status. I've been able to connect to wireless networks just fine with this netbook. However, if the wireless chip ever becomes disabled, I have to reboot to get my network connection back. This generally happens when suspending. For some reason the LED will be off and I have to hit Fn + F2 for it to light up again. However, after doing so, Linux will not reconnect to the network. It simply changes the wireless status from "wireless is disabled" to "device not ready". Even worse, I've recently had issues with the chip being enabled at boot, thus making it nearly impossible to get connected. I've searched around on-line but haven't found much of anything useful on this. This happens on all kinds of different distros including Ubuntu 9.10 Netbook, EeeBuntu 4 beta, Jolicloud and Ubuntu 10.04 Netbook. Edit I noticed this question is getting a lot of views. To give a quick update, I never did resolve this issue with the given distro's. However, I'm currently running Ubuntu 10.10 netbook edition and this issue has gone away.

  Read the article

• How to Configure Different Gateways for Different VLANs

  - by Bryan

  I have around 10 VLANs, and two different internet gateways. I want traffic on some VLANs to use one gateway, and traffic on other VLANs to use another gateway. (e.g. I wish to route server traffic via one gateway and desktop internet traffic down another). Is it possible to configure different default routes for different VLANs on a Dell 6224 switch? Or is their a better way of doing what I'm trying to achieve? The core switch I am using is a Dell PowerConnect 6224 switch. Currently I'm using: ip route 0.0.0.0 0.0.0.0 10.58.3.16 which creates the default gateway for all VLANs. I did consider adding multiple routes with equal metric, and setting ACLs between the VLANs to deny access to the 'wrong' gateway, but that idea just doesn't feel right to me.

  Read the article

• Building a Server at Home

  - by madhairsilence

  Am left with a Spare PC . So , I thought of converting it to a Server kind of thing. I read about NAS Serer for simple file storage. But it is just a file server. I also play games like counter strike and other online games. So, I would like to use the same server for those purpose., so that a game server will running all the time so that me and my friends can join any time. Is running NAS server a best option or, is there any better arrangement possible so that my spare system can act better than a simple file server

  Read the article

• SMTP Client implementation [on hold]

  - by orif

  I'm implementing SMTP client. What should the client do once it already sent the "." at the end of the mail, but didn't receive "250 Ok"? This is how the conversation between the client and server look like: Server Response: 220 www.sample.com ESMTP Postfix Client Sending : HELO domain.com Server Response: 250 Hello domain.com Client Sending : MAIL FROM: <[email protected]> Server Response: 250 Ok Client Sending : RCPT TO: <[email protected]> Server Response: 250 Ok Client Sending : DATA Server Response: 354 End data with <CR><LF>.<CR><LF> Client Sending : Subject: Example Message Client Sending : From: [email protected] Client Sending : To: [email protected] Client Sending : Client Sending : TEST MAIL Client Sending : Client Sending : . Server Response: 250 Ok: queued as 23411 Client Sending : QUIT I'm not sure what should I do if the client sends "." and doesn't receive the 250 Ok - because of possible network error. Was the "." sent or not? Should the client resend the mail - and - maybe - duplicate the item, or not - and risk in losing an important mail item? Thank you.

  Read the article

• No Drivers in Ubuntu 9.1!!!

  - by Chris

  I have a Lenovo G550 and I installed Ubuntu on it through Windows and I have no drivers. No sound, no wireless. I previously had installed it through Windows Vista with no problems at all. I now run Windows 7 and cannot seem to get it to function properly. I tried installing the recommended drivers to make sure the proper ones were installed and that still did nothing. Any one have ANY idea what could be happening? I just don't feel like dealing with it.

  Read the article

• How to get all IPs of a domain?

  - by DenMark

  How can I get all IPs of a domain name, say, www.google.com? Of course, nslookup and host command will give me IPs of a domain. But what shall I do if I want a list ALL (or, at least a lot more than just one or two..) IPs of that domain?

  Read the article

• No internet on some devices, still on WiFi

  - by Joost

  Ok, here's the situation. I live with 3 friends, and we often sit in the living room with laptops out. There's a WiFi router in the kitchen, and we have quite a stable connection. The issue, however, is this: sometimes, all of a sudden one of my friends loses internet connection. Even disconnecting/reconnecting to the WiFi network does not help. When we restart the router, though, it works like a charm again. The odd thing is, it happens just for this one Windows 7 laptop. We've switched routers (for a different reason) in the mean time, but the issue remained. This makes me suspect the laptop even more. I realise I've given little details, but I don't really know what to try/do. Any suggestions what it might be?

  Read the article

• Best way to segment traffic, Vlan or subnet

  - by thebird

  We have a medium sized network of around 200 nodes and are currently in the process of replacing old daisy chained switches with stack-able or chassis style switches. Right now our network is broken up via subnet; production, management, IP, etc each on a separate subnet. Does anyone have an opinion on whether creating Vlan's instead of subnets would be more beneficial? Our general goal is to prevent bottlenecks, separate traffic for security, and to manage traffic with more ease.

  Read the article

• Detecting what causes the delay between entering a domain name and load of the page

  - by Quintin Par

  My website takes awfully long time after entering the domain name and before the content starts showing up. I assume this is something to do with the dns resolution or the networks. How do I go about troubleshooting this problem? Where do I start and what tools do I need? I know I’ll need nslookup and traceroute. What else will I need?

  Read the article

• Too many Tunnel Adapter Interfaces

  - by Tomas Lycken

  If I open a command prompt on my machine and type ipconfig /all, I see lots of Tunnel adapter Local Area Connection* 9: Media state . . . . . . . . . . . . . : Media disconnected Connection-specific DNS Sufficx . . . : Description . . . . . . . . . . . . . : Microsoft 6to4 Adapter #5 Physical address. . . . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . . . : No Autoconfiguration Enabled . . . . . . : Yes In fact, they're so many that my "real" adapters are pushed out of the stack, and can't be seen anymore. Is there any flag I can use on ipconfig to hide all virtual interfaces? Or is there some other way around this problem? Since they always say "Media disconnected" I suppose disabling could be an option, but if possible I'd rather not turn any functionality off. I just want to control what output I get from ipconfig. Also, I know these are related to IPv6 stuff. However, most of what I find on google merely states what these are, and that they're harmless - nothing about hiding/removing them.

  Read the article

• Problem connecting to Ubuntu Server in same local network.

  - by frbry

  I have my LAN set up as below: 192.168.2.1: ADSL Router (DHCP Range: 192.168.2.2-192.168.2.250) 192.168.2.254: Wireless Access Point 192.168.2.253: Ubuntu Server (Static IP) 192.168.2.2: My Laptop (Connects to Internet via the Wireless AP) NAT in router is active and set up to transfer requests made over port 80 to 192.168.2.253. Router's firewall is inactive. No IPs in DMZ. My friends get Apache's It Works page when they try to enter http://my_external_ip. But I get Router's configuration page instead of that. What should I check or do? Thanks.

  Read the article

• Network load balancing, efficience and limits?

  - by Vimvq1987

  I'm about to study about NLB on Windows Server 2003. It archives both of my interests now: scalability and high-availability. But I don't know about its power in production environment. Is NLB a efficient solution? How does it implement in real-world? Is it popular? What are its limit? Thank you so much for answering my questions. :)

  Read the article

• Could a HomePlug be used to connect 2 routers?

  - by tigermain

  I have 2 routers that I would like to connect together (they are wireless but dont have an AP mode) could I simply buy a pair of homeplugs and connect them in order for all machines to have complete visibility of each other?! The DHCP will only be enabled on one, so the other will simply be acting as a switch

  Read the article

• How to use a Network adapter only for a specific Connection on Win7?

  - by Tokk

  Hey, Guys I've got several network adapter in my PC (from LAN, WLAN, VPN etc...) and what I want to accomplish is that some specific adresses use the VPN adapter, while all others use eiter LAN or WLAN. (So for example http://win-server/ is using VPN, while www.google still uses LAN connection.) I've want to solve this with the Windows settings and not the VPN settings to make sure I can do it with every VPN-Provider. Thank You

  Read the article

• Frequent and weird wifi disconnections

  - by Sidou

  How would you explain, troubleshoot (and solve) the following problem? Wifi ADSL modem router D-link 2640R installed in living room at about 1.8m height. Working fine, synchronising and getting/serving stable internet connection. First situation: -Laptop 01 in other end of the house, let's say in room01 southern to the living room, distant by about 15m. Getting stable signal of good to very good quality. No disconnection. -Laptop 02 in room02 opposite to room01 (5m West) which makes it almost at the same distance and direction from the router located 15m North. Getting stable signal of good to very good quality. No disconnection. Second situation: -Laptop 01 moved to room03 Northern to the living room (actually just 3m behind the wall where the router lies). Getting stable signal of excellent quality. No disconnection. -Laptop 02 still in room02 but now experiences frequent disconnections (actually almost impossible to get the Internet even though the signal level is still very good. Either no Internet with the wifi icon appearing connected to access point or no connection established at all which happens every 2 minutes and that means virtually no Internet at all as I can just get a timeframe of 1 minute or so to load any website or even get to the router's web based control panel. If Laptop 01 is completely shut down or its wifi adapters shut down or even still working but its wifi MAC address forbidden, then Laptop 02 has no problem at all. If Laptop 02 is moved to a nearer location to the router, in the living room for instance, then no connection problem occurs even if Laptop 01 is also connected. And also if we move back Laptop 01 to its original location (room 01), then no problem as well. I'm completely lost and don't know how to address this issue. I tried to change the Wifi channel and even tried the auto channel scan but that didn't solve it. I know that the problem is probably coming from Laptop 01 being in its new location or some sort of interference as the problem occurs only under the described condition but I have no idea how to solve it! I also scanned the neighborhood for wifi jam using InSSIDer, there are few other access points but they don't seem to affect the situation. Any ideas about the steps to follow or tools to use ?

  Read the article

• Why Would one VLAN have no Communication on one Switch?

  - by Webs

  So the problem is we have a device or host that needs to communicate on a specific VLAN. This VLAN is not new, it is running all throughout our environment and works fine. But the VLAN was recently configured on the switch in question, a Cisco 3750. The DHCP server is handing out addresses on that VLAN with no problem. I have verified the cable between the host and switch and tried multiple hosts, but none of them can communicate or get an address. I plugged my laptop into an empty port which had a different VLAN assigned and immediately got a DHCP address. When I changed that port to the same VLAN I'm having issues with I got the same problem. The laptop just sits there and tries to DHCP an address but nothing happens. I double checked the cores and their Layer 3 VLAN config and its fine too. Plus I figured the issue couldn't be with them because the VLAN works fine everywhere else it exists. So the only other thing I can think of is the switch, but the VLAN exists on the switch and seems to be configured correctly. The trunks appear to be configured just fine as well too. Anyone have any ideas? I'm lost on this one.

  Read the article

• What software is used by buy-side investment companies?

  - by user44995

  What software is used by buy-side investment companies? For educational purposes, could anyone describe IT infrastructure of a typical buy-side investment company: a hedge fund, a mutual fund or a wealth management company. No particular details are needed, just what type of software is used how different software modules interact with each other. Am I asking too much?

  Read the article

• Using PVLANs with normal VLANs in a trunked environment

  - by user974896

  Assume a trunked environment with two switches, S1 and S2. The swtiches are connected with a trunk port designed to pass VLAN 26. What would happen if VLAN 26 on S2 is configured as a private-vlan with the default gateway and DHCP server and default gateway as promisc ports. What if S1's VLAN 26 is configured as a standard VLAN. Would the hosts on S1 be able to communicate with the promisc ports on S2? Would they be able to communicate with the hosts on S2? To further complicate things what if the DHCP server were to reside on S1 and I wanted S2 to have private VLANS with promisc ports as the gateway and DHCP server while still leaving S1 in a standard vlan configuration.

  Read the article

• Only 6to4 addresses are accessible via 6to4 interface

  - by wRAR

  I have a configured 6to4 interface. I can communicate with any other 6to4 host (2002::/4), but not with other hosts, packets just seem dropped. I've tried several configurations and OSes so I think this is a provider issue. How can I make sure it is it and what should I tell my provider?

  Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >