Search Results

Search found 18329 results on 734 pages for 'interpret order'.

Page 196/734 | < Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >

  • How to give points for each indices of list

    - by Eric Jung
    def voting_borda(rank_ballots): '''(list of list of str) -> tuple of (str, list of int) The parameter is a list of 4-element lists that represent rank ballots for a single riding. The Borda Count is determined by assigning points according to ranking. A party gets 3 points for each first-choice ranking, 2 points for each second-choice ranking and 1 point for each third-choice ranking. (No points are awarded for being ranked fourth.) For example, the rank ballot shown above would contribute 3 points to the Liberal count, 2 points to the Green count and 1 point to the CPC count. The party that receives the most points wins the seat. Return a tuple where the first element is the name of the winning party according to Borda Count and the second element is a four-element list that contains the total number of points for each party. The order of the list elements corresponds to the order of the parties in PARTY_INDICES.''' #>>> voting_borda([['GREEN','NDP', 'LIBERAL', 'CPC'], ['GREEN','CPC','LIBERAL','NDP'], ['LIBERAL','NDP', 'CPC', 'GREEN']]) #('GREEN',[4, 6, 5, 3]) list_of_party_order = [] for sublist in rank_ballots: for party in sublist[0]: if party == 'GREEN': GREEN_COUNT += 3 elif party == 'NDP': NDP_COUNT += 3 elif party == 'LIBERAL': LIBERAL_COUNT += 3 elif party == 'CPC': CPC_COUNT += 3 for party in sublist[1]: if party == 'GREEN': GREEN_COUNT += 2 elif party == 'NDP': NDP_COUNT += 2 elif party == 'LIBERAL': LIBERAL_COUNT += 2 elif party == 'CPC': CPC_COUNT += 2 for party in sublist[2]: if party == 'GREEN': GREEN_COUNT += 1 elif party == 'NDP': NDP_COUNT += 1 elif party == 'LIBERAL': LIBERAL_COUNT += 1 elif party == 'CPC': CPC_COUNT += 1 I don't know how I would give points for each indices of the list MORE SIMPLY. Can someone please help me? Without being too complicated. Thank you!

    Read the article

  • Algorithm for finding similar users through a join table

    - by Gdeglin
    I have an application where users can select a variety of interests from around 300 possible interests. Each selected interest is stored in a join table containing the columns user_id and interest_id. Typical users select around 50 interests out of the 300. I would like to build a system where users can find the top 20 users that have the most interests in common with them. Right now I am able to accomplish this using the following query: SELECT i2.user_id, count(i2.interest_id) AS count FROM interests_users as i1, interests_users as i2 WHERE i1.interest_id = i2.interest_id AND i1.user_id = 35 GROUP BY i2.user_id ORDER BY count DESC LIMIT 20; However, this query takes approximately 500 milliseconds to execute with 10,000 users and 500,000 rows in the join table. All indexes and database configuration settings have been tuned to the best of my ability. I have also tried avoiding the use of joins altogether using the following query: select user_id,count(interest_id) count from interests_users where interest_id in (13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31,32,33,34,35,36,37,38,39,40,41,42,43,44,45,46,47,48,49,50,51,52,53,54,55,56,57,58,59,60,61,62,63,64,65,66,68,69,70,71,72,73,74,75,76,77,78,79,80,81,82,83,84,85,86,87,88,89,90,91,92,93,94,95,96,97,98,508) group by user_id order by count desc limit 20; But this one is even slower (~800 milliseconds). How could I best lower the time that I can gather this kind of data to below 100 milliseconds? I have considered putting this data into a graph database like Neo4j, but I am not sure if that is the easiest solution or if it would even be faster than what I am currently doing.

    Read the article

  • Silverlight - C# and LINQ - Ordering By Multiple Fields

    - by user70192
    Hello, I have an ObservableCollection of Task objects. Each Task has the following properties: AssignedTo Category Title AssignedDate I'm giving the user an interface to select which of these fields they was to sort by. In some cases, a user may want to sort by up to three of these properties. How do I dynamically build a LINQ statement that will allow me to sort by the selected fields in either ascending or descending order? Currently, I'm trying the following, but it appears to only sort by the last sort applied: var sortedTasks = from task in tasks select task; if (userWantsToSortByAssignedTo == true) { if (sortByAssignedToDescending == true) sortedTasks = sortedTasks.OrderByDescending(t => t.AssignedTo); else sortedTasks = sortedTasks.OrderBy(t => t.AssignedTo); } if (userWantsToSortByCategory == true) { if (sortByCategoryDescending == true) sortedTasks = sortedTasks.OrderByDescending(t => t.Category); else sortedTasks = sortedTasks.OrderBy(t => t.Category); } Is there an elegant way to dynamicaly append order clauses to a LINQ statement?

    Read the article

  • Which database I can used and relationship in it ??

    - by mimo-hamad
    My projece make me confused which I didn't find clear things that make me understand the required database and the relationships in it So, would a super one help me to solve it ?!! ;D this is required: 1) Model the data stored in the database (Identify the entities, roles, relationships, constraints, etc.) 2) Write the Oracle commands to create the database, find appropriate data, and populate the database 3) Write five different queries on your database, using the SELECT/FROM/WHERE construct provided in SQL. Your five queries should illustrate several different aspects of database querying, such as: a. Queries over more than one relation (by listing more than one relation in the FROM clause) b. Queries involving aggregate functions, such as SUM, COUNT, and AVG c. Queries involving complicated selects and joins d. Queries involving GROUP BY, HAVING or other similar functions. e. Queries that require the use of the DISTINCT keyword. And this the condition that we need to determine it to solve the required Q's above : 5) It is desired to develop an Internet membership club to buy products at special prices online. To join, new members must be referred by another existing member of the club. The system will keep the following information for each member: The member ID, referring member, birth date, member name, address, phone, mobile, credit card type, number and expiration date. The items are always shipped to the member's address noted in the membership application. The shipping fees will differ for each order.For each item to be requested, the member will select an item from a long list of possible items. For each item in the database, we store an item ID, an item name, description, and list price. The list price will be different from the actual sale price. The available quantity and the back-ordered quantity (the back-ordered quantity is the quantity on-order by the club from its suppliers) is also noted

    Read the article

  • How can I pass in a params of Expression<Func<T, object>> to a method?

    - by Pure.Krome
    Hi folks, I have the following two methods :- public static IQueryable<T> IncludeAssociations<T>(this IQueryable<T> source, params string[] associations) { ... } public static IQueryable<T> IncludeAssociations<T>(this IQueryable<T> source, params Expression<Func<T, object>>[] expressions) { ... } Now, when I try and pass in a params of Expression<Func<T, object>>[], it always calls the first method (the string[]' and of course, that value isNULL`) Eg. Expression<Func<Order, object>> x1 = x => x.User; Expression<Func<Order, object>> x2 = x => x.User.Passport; var foo = _orderRepo .Find() .IncludeAssociations(new {x1, x2} ) .ToList(); Can anyone see what I've done wrong? Why is it thinking my params are a string? Can I force the type, of the 2x variables?

    Read the article

  • Moving to an arbitrary position in a file in Python

    - by B Rivera
    Let's say that I routinely have to work with files with an unknown, but large, number of lines. Each line contains a set of integers (space, comma, semicolon, or some non-numeric character is the delimiter) in the closed interval [0, R], where R can be arbitrarily large. The number of integers on each line can be variable. Often times I get the same number of integers on each line, but occasionally I have lines with unequal sets of numbers. Suppose I want to go to Nth line in the file and retrieve the Kth number on that line (and assume that the inputs N and K are valid --- that is, I am not worried about bad inputs). How do I go about doing this efficiently in Python 3.1.2 for Windows? I do not want to traverse the file line by line. I tried using mmap, but while poking around here on SO, I learned that that's probably not the best solution on a 32-bit build because of the 4GB limit. And in truth, I couldn't really figure out how to simply move N lines away from my current position. If I can at least just "jump" to the Nth line then I can use .split() and grab the Kth integer that way. The nuance here is that I don't just need to grab one line from the file. I will need to grab several lines: they are not necessarily all near each other, the order in which I get them matters, and the order is not always based on some deterministic function. Any ideas? I hope this is enough information. Thanks!

    Read the article

  • Iterating through Event Log Entry Collection, IndexOutOutOfBoundsException

    - by fjdumont
    Hello, in a service application I am iterating through the Windows application event log to parse Events in order react depanding on the entry message. In the case that the event log is full (Windows usually makes sure there is enough space by deleting old entries - this is configurable in the eventvwr.exe settings), the service always runs into an IndexOutOfBoundsException while iterating through the EventLog.Entries collection. No matter how I iterate (for-loop, using the collections enumerator, copying the collection into an array, ...), I can't seem to get rid of this ´bug´. Currently, I ensure that the log is not full in order to keep the service running by regularly deleting the last few item by parsing the event log file and deleting the last few nodes (Don't beat me up, I couldn't find a better alternative...). How can I iterate through the collection without trying to access already deleted entries? Is there probably a more elegant method? I am only trying to acces the logs written during the last x seconds (even LINQ failed to select those when the log is full - same exception), could this help? Thanks for any advice and hints Frank Edit: I forgot to mention that my assumption is the loops are accessing entries which are being deleted during iteration by Windows. Basically that is why I tried to clone the collection. Is there perhaps a way to lock the collection for a small amount of time for just my application?

    Read the article

  • Matab - Trace contour line between two different points

    - by Graham
    Hi, I have a set of points represented as a 2 row by n column matrix. These points make up a connected boundary or edge. I require a function that traces this contour from a start point P1 and stop at an end point P2. It also needs to be able trace the contour in a clockwise or anti-clockwise direction. I was wondering if this can be achieved by using some of matlabs functions. I have tried to write my own function but this was riddled with bugs and I have also tried using bwtraceboundary and indexing however this has problematic results as the points within the matrix are not in the order that create the contour. Thank you in advance for any help. Btw, I have included a link to a plot of the set of points. It is half the outline of a hand. The function would ideally trace the contour from ether the red star to the green triangle. Returning the points in order of traversal.

    Read the article

  • JQuery tablesorter - Second click on column header doesn't resort

    - by Jonathan
    I'm using tablesorter in on a table I added to a view in django's admin (although I'm not sure this is relevant). I'm extending the html's header: {% block extrahead %} <script type="text/javascript" src="http://code.jquery.com/jquery-1.4.2.js"></script> <script type="text/javascript" src="http://mysite.com/media/tablesorter/jquery.tablesorter.js"></script> <script type="text/javascript"> $(document).ready(function() { $("#myTable").tablesorter(); } ); </script> {% endblock %} When I click on a column header, it sorts the table using this column in descending order - that's ok. When I click the same column header a second time - it does not reorder to ascending order. What's wrong with it? the table's html looks like: <table id="myTable" border="1"> <thead> <tr> <th>column_name_1</th> <th>column_name_2</th> <th>column_name_3</th> </tr> </thead> <tbody> {% for item in extra.items %} <tr> <td>{{ item.0|safe }} </td> <td>{{ item.1|safe }} </td> <td>{{ item.2|safe }} </td> </tr> {% endfor %} </tbody> </table>

    Read the article

  • MySQL SELECT combining 3 SELECTs INTO 1

    - by Martin Tóth
    Consider following tables in MySQL database: entries: creator_id INT entry TEXT is_expired BOOL other: creator_id INT entry TEXT userdata: creator_id INT name VARCHAR etc... In entries and other, there can be multiple entries by 1 creator. userdata table is read only for me (placed in other database). I'd like to achieve a following SELECT result: +------------+---------+---------+-------+ | creator_id | entries | expired | other | +------------+---------+---------+-------+ | 10951 | 59 | 55 | 39 | | 70887 | 41 | 34 | 108 | | 88309 | 38 | 20 | 102 | | 94732 | 0 | 0 | 86 | ... where entries is equal to SELECT COUNT(entry) FROM entries GROUP BY creator_id, expired is equal to SELECT COUNT(entry) FROM entries WHERE is_expired = 0 GROUP BY creator_id and other is equal to SELECT COUNT(entry) FROM other GROUP BY creator_id. I need this structure because after doing this SELECT, I need to look for user data in the "userdata" table, which I planned to do with INNER JOIN and select desired columns. I solved this problem with selecting "NULL" into column which does not apply for given SELECT: SELECT creator_id, COUNT(any_entry) as entries, COUNT(expired_entry) as expired, COUNT(other_entry) as other FROM ( SELECT creator_id, entry AS any_entry, NULL AS expired_entry, NULL AS other_enry FROM entries UNION SELECT creator_id, NULL AS any_entry, entry AS expired_entry, NULL AS other_enry FROM entries WHERE is_expired = 1 UNION SELECT creator_id, NULL AS any_entry, NULL AS expired_entry, entry AS other_enry FROM other ) AS tTemp GROUP BY creator_id ORDER BY entries DESC, expired DESC, other DESC ; I've left out the INNER JOIN and selecting other columns from userdata table on purpose (my question being about combining 3 SELECTs into 1). Is my idea valid? = Am I trying to use the right "construction" for this? Are these kind of SELECTs possible without creating an "empty" column? (some kind of JOIN) Should I do it "outside the DB": make 3 SELECTs, make some order in it (let's say python lists/dicts) and then do the additional SELECTs for userdata? Solution for a similar question does not return rows where entries and expired are 0. Thank you for your time.

    Read the article

  • How to populate Range variable from a Sub/Function call?

    - by Ken Ingram
    I am trying to get this sub to work but the operationalRange variable is not being assigned. Despite the fact that the function selectBodyRow(bodyName) works fine. Sub sortRows(bodyName As String, ByRef wksht As Worksheet) Dim operationalRange As Range Set operationalRange = selectBodyRow(bodyName) Debug.Print "Sorting Worksheet: " & wksht.Name If Not operationalRange Is Nothing Then operationalRange.Select Debug.Print "Sorting " & operationalRange.Count & "Rows." ActiveWorkbook.Worksheets(wksht.Name).Sort.SortFields.Clear ActiveWorkbook.Worksheets(wksht.Name).Sort.SortFields.Add Key:=operationalRange, _ SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal ActiveWorkbook.Worksheets(wksht.Name).Sort.SortFields.Add Key:=operationalRange, _ SortOn:=xlSortOnValues, Order:=xlAscending, DataOption:=xlSortNormal With ActiveWorkbook.Worksheets(wksht.Name).Sort .SetRange operationalRange .Header = xlGuess .MatchCase = False .Orientation = xlTopToBottom .SortMethod = xlPinYin .Apply End With Else MsgBox "Body is not being Set" End If End Sub The Sub being called by the above Sub is: Function selectBodyRow(bodyName As String) As Range Dim rangeStart As String, rangeEnd As String Dim selectionStart As Range, selectionEnd As Range Dim result As Range, srchRng As Range, cngrs As Variant If bodyName = "WEST" Then rangeStart = "<-WEST START->" rangeEnd = "<-WEST END->" ElseIf bodyName = "EAST" Then rangeStart = "<-EAST START->" rangeEnd = "<-EAST END->" End If Set srchRng = Range("A:A") srchRng.Select Set selectionStart = srchRng.Find(What:=rangeStart, After:=ActiveCell, LookIn _ :=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _ xlNext, MatchCase:=False, SearchFormat:=False) Set selectionEnd = srchRng.Find(What:=rangeEnd, After:=ActiveCell, LookIn _ :=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:= _ xlNext, MatchCase:=False, SearchFormat:=False) Set result = Range(selectionStart.Offset(1, 0), selectionEnd.Offset(-1, 0)) result.EntireRow.Select End Function

    Read the article

  • Queries within queries: Is there a better way?

    - by mririgo
    As I build bigger, more advanced web applications, I'm finding myself writing extremely long and complex queries. I tend to write queries within queries a lot because I feel making one call to the database from PHP is better than making several and correlating the data. However, anyone who knows anything about SQL knows about JOINs. Personally, I've used a JOIN or two before, but quickly stopped when I discovered using subqueries because it felt easier and quicker for me to write and maintain. Commonly, I'll do subqueries that may contain one or more subqueries from relative tables. Consider this example: SELECT (SELECT username FROM users WHERE records.user_id = user_id) AS username, (SELECT last_name||', '||first_name FROM users WHERE records.user_id = user_id) AS name, in_timestamp, out_timestamp FROM records ORDER BY in_timestamp Rarely, I'll do subqueries after the WHERE clause. Consider this example: SELECT user_id, (SELECT name FROM organizations WHERE (SELECT organization FROM locations WHERE records.location = location_id) = organization_id) AS organization_name FROM records ORDER BY in_timestamp In these two cases, would I see any sort of improvement if I decided to rewrite the queries using a JOIN? As more of a blanket question, what are the advantages/disadvantages of using subqueries or a JOIN? Is one way more correct or accepted than the other?

    Read the article

  • Ad distribution problem: an optimal solution?

    - by Mokuchan
    I'm asked to find a 2 approximate solution to this problem: You’re consulting for an e-commerce site that receives a large number of visitors each day. For each visitor i, where i € {1, 2 ..... n}, the site has assigned a value v[i], representing the expected revenue that can be obtained from this customer. Each visitor i is shown one of m possible ads A1, A2 ..... An as they enter the site. The site wants a selection of one ad for each customer so that each ad is seen, overall, by a set of customers of reasonably large total weight. Thus, given a selection of one ad for each customer, we will define the spread of this selection to be the minimum, over j = 1, 2 ..... m, of the total weight of all customers who were shown ad Aj. Example Suppose there are six customers with values 3, 4, 12, 2, 4, 6, and there are m = 3 ads. Then, in this instance, one could achieve a spread of 9 by showing ad A1 to customers 1, 2, 4, ad A2 to customer 3, and ad A3 to customers 5 and 6. The ultimate goal is to find a selection of an ad for each customer that maximizes the spread. Unfortunately, this optimization problem is NP-hard (you don’t have to prove this). So instead give a polynomial-time algorithm that approximates the maximum spread within a factor of 2. The solution I found is the following: Order visitors values in descending order Add the next visitor value (i.e. assign the visitor) to the Ad with the current lowest total value Repeat This solution actually seems to always find the optimal solution, or I simply can't find a counterexample. Can you find it? Is this a non-polinomial solution and I just can't see it?

    Read the article

  • Orientation issue while presenting Modal ViewController

    - by Jacky Boy
    Current scenario: Right now I am showing a UIViewController using a segue with the style Modal and presentation Sheet. This Modal gets its superview bounds change, in order to have the dimensions I want, like this: - (void)viewWillLayoutSubviews { [super viewWillLayoutSubviews]; self.view.superview.bounds = WHBoundsRect; } The only allowed orientations are UIInterfaceOrientationLandscapeLeft and UIInterfaceOrientationLandscapeRight. Since the Modal has some TextFields and the keyboard would be over the Modal itself, I am changing its center so it moves a bit to the top. The problem: What I am noticing right now, is that I am unable to work with the Y coordinate. In order for it move vertically (remember it's on landscape) I need to work with the X. The problem is that when it's UIInterfaceOrientationLandscapeLeft I need to come with a negative X. And when it's UIInterfaceOrientationLandscapeRight I need to come with a positive X. So it seems that the X/Y Coordinate System is "glued" to the top left corner while in Portrait and when an orientation occurs, it's still there: What I have done So I have something like this: UIInterfaceOrientation orientation = [[UIApplication sharedApplication] statusBarOrientation]; NSInteger newX = 0.0f; if (orientation == UIInterfaceOrientationLandscapeLeft) { // Logic for calculating the negative X. } else { // Logic for calculating the positive X. } It works exactly like I want, but it seems a very fragile implementation. Am I missing something? Is this the expected behaviour?

    Read the article

  • MySQL Paritioning performance

    - by Imran Pathan
    Measured performance on key partitioned tables and normal tables separately. But we couldn't find any performance improvement with partitioning. Queries are pruned. Using MySQL 5.1.47 on RHEL 4. Table details: UserUsage - Will have entries for user mobile number and data usage for each date. Mobile number and Date as PRI KEY. UserProfile - Queries prev table and stores summary for each mobile number. Mobile number PRI KEY. CREATE TABLE `UserUsage` ( `Msisdn` decimal(20,0) NOT NULL, `Date` date NOT NULL, . . PRIMARY KEY USING BTREE (`Msisdn`,`Date`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 PARTITION BY KEY(Msisdn) PARTITIONS 50; CREATE TABLE `UserProfile` ( `Msisdn` decimal(20,0) NOT NULL, . . PRIMARY KEY (`Msisdn`) ) ENGINE=InnoDB DEFAULT CHARSET=latin1 PARTITION BY KEY(Msisdn) PARTITIONS 50; Second table is updated by query select and order by date in first table in a perl program, query is select * from UserUsage where Msisdn=number order by Date desc limit 7 [Process data in perl] update UserProfile values(....) where Msisdn=number explain partition for select, shows row being scanned in a particular partition only. Is something wrong with partition design or queries as partitioning is taking almost same or more time compared to normal tables?

    Read the article

  • How to specify allowed exceptions in WCF's configuration file?

    - by tucaz
    Hello! I´m building a set of WCF services for internal use through all our applications. For exception handling I created a default fault class so I can return treated message to the caller if its the case or a generic one when I have no clue what happened. Fault contract: [DataContract(Name = "DefaultFault", Namespace = "http://fnac.com.br/api/2010/03")] public class DefaultFault { public DefaultFault(DefaultFaultItem[] items) { if (items == null || items.Length== 0) { throw new ArgumentNullException("items"); } StringBuilder sbItems = new StringBuilder(); for (int i = 0; i Specifying that my method can throw this exception so the consuming client will be aware of it: [OperationContract(Name = "PlaceOrder")] [FaultContract(typeof(DefaultFault))] [WebInvoke(UriTemplate = "/orders", BodyStyle = WebMessageBodyStyle.Bare, ResponseFormat = WebMessageFormat.Json, RequestFormat = WebMessageFormat.Json, Method = "POST")] string PlaceOrder(Order newOrder); Most of time we will use just .NET to .NET communication with usual binds and everything works fine since we are talking the same language. However, as you can see in the service contract declaration I have a WebInvoke attribute (and a webHttp binding) in order to be able to also talk JSON since one of our apps will be built for iPhone and this guy will talk JSON. My problem is that whenever I throw a FaultException and have includeExceptionDetails="false" in the config file the calling client will get a generic HTTP error instead of my custom message. I understand that this is the correct behavior when includeExceptionDetails is turned off, but I think I saw some configuration a long time ago to allow some exceptions/faults to pass through the service boundaries. Is there such thing like this? If not, what do u suggest for my case? Thanks a LOT!

    Read the article

  • Getting the first of a GROUP BY clause in SQL

    - by Michael Bleigh
    I'm trying to implement single-column regionalization for a Rails application and I'm running into some major headaches with a complex SQL need. For this system, a region can be represented by a country code (e.g. us) a continent code that is uppercase (e.g. NA) or it can be NULL indicating the "default" information. I need to group these items by some relevant information such as a foreign key (we'll call it external_id). Given a country and its continent, I need to be able to select only the most specific region available. So if records exist with the country code, I select them. If, not I want a records with the continent code. If not that, I want records with a NULL code so I can receive the default values. So far I've figured that I may be able to use a generated CASE statement to get an arbitrary sort order. Something like this: SELECT *, CASE region WHEN 'us' THEN 1 WHEN 'NA' THEN 2 ELSE 3 END AS region_sort FROM my_table WHERE region IN ('us','NA') OR region IS NULL GROUP BY external_id ORDER BY region_sort The problem is that without an aggregate function the actual data returned by the GROUP BY for a given row seems to be untameable. How can I massage this query to make it return only the first record of the region_sort ordered groups?

    Read the article

  • connecting to secure database from website host

    - by jim
    Hello all, I've got a requirement to both read and write data via a .net webservice to a sqlserver database that's on a private network. this database is currently accessed via a vpn connection by remote client software (on standard desktop machines) to get latest product prices and to upload product stock sales. I've been tasked with finding a way to centralise this access from a webservice that the clients then access, rather than them using the vpn route to connect directly to the database. My question is related to my .net service's relationship to the sqlserver database. What are the options for connecting to a private network vpn from a domain host in order to achive the functionality of allowing the webservice to both read and write data to the database. For now, I'm not too concerned about the client connectivity and security (tho i appreciate that this will have to be worked out too), I'm really just interested in discovering the options available in order to allow my .net webservice to connect to the private network in as painless and transparent a way as posible. The option of switching the database onto public hosting is not an option, so I have to work with the sdcenario as described above for now, unless there's a compelling rationale presented to do otherwise. thanks all... jim

    Read the article

  • Maven3 Issues with building a multi-module enterprise project

    - by Sujit K
    I just migrated from Maven2 to Maven3 and I'm able to build each module individually or all the modules in one shot by calling mvn clean install. However, in Maven2, since we have multi-module enterprise project, we build multiple ear's and each ear is built as its own module with its own child pom. To build an individual ear with its dependents, the below command works fine in Maven2 but not in Maven3. Let me explain the issue in Maven3 a bit later. mvn -pl ear_module -rf first_dependent_module -am clean install In Maven2 when the reactor lists the build order, I see first_dependent_module second_dependent_module ear_module End of the day I have my ear module also part of the reactor which is how it should be. The reason we call -rf is we don't want to delete the target folder at the main ${project.basedir} (so not to delete the output created in target from building the other ear modules). With Maven3, however, this is all I see when the reactor lists the build order: first_dependent_module second_dependent_module Maven3 totally ignores the argument (ear_module) set to -pl flag to be also built after its dependents have been. Not sure what I'm missing here. Any help/tips would be greatly appreciated. P.S: The build I'm making is similar to the one below.... Build specific module in multi-module project Thanks, SK

    Read the article

  • Code promotion: Enforcing the rules

    - by jbarker7
    So here is our problem: We have a small team of developers with their own ways of doing things-- I am trying to formalize a process in which we are required to promote our code in the following order: Local sandbox Dev UAT Staging Live Developers develop/test as they go on their own sandbox, Dev is its own box that we would use for continuous integration, UAT is another site in IIS on the dev box, which uses our dev database. We then promote to staging, which is a site in IIS on the Live box and using live data (just like the live, hence staging). Then, finally, we promote to live. Here are a few of my questions: 1.) Does this seem to be best practice? If not, what needs to be done differently? 2.) How do I enforce the rules to the developers? Often developers skip steps in order to save time... this should not be tolerated and would be great if it could be physically enforced. 3.) How do I enforce these rules to the business group? The business group just wants to get features out FAST. Do we promote only on certain days? Thanks! Josh

    Read the article

  • TicTacToe strategic reduction

    - by NickLarsen
    I decided to write a small program that solves TicTacToe in order to try out the effect of some pruning techniques on a trivial game. The full game tree using minimax to solve it only ends up with 549,946 possible games. With alpha-beta pruning, the number of states required to evaluate was reduced to 18,297. Then I applied a transposition table that brings the number down to 2,592. Now I want to see how low that number can go. The next enhancement I want to apply is a strategic reduction. The basic idea is to combine states that have equivalent strategic value. For instance, on the first move, if X plays first, there is nothing strategically different (assuming your opponent plays optimally) about choosing one corner instead of another. In the same situation, the same is true of the center of the walls of the board, and the center is also significant. By reducing to significant states only, you end up with only 3 states for evaluation on the first move instead of 9. This technique should be very useful since it prunes states near the top of the game tree. This idea came from the GameShrink method created by a group at CMU, only I am trying to avoid writing the general form, and just doing what is needed to apply the technique to TicTacToe. In order to achieve this, I modified my hash function (for the transposition table) to enumerate all strategically equivalent positions (using rotation and flipping functions), and to only return the lowest of the values for each board. Unfortunately now my program thinks X can force a win in 5 moves from an empty board when going first. After a long debugging session, it became apparent to me the program was always returning the move for the lowest strategically significant move (I store the last move in the transposition table as part of my state). Is there a better way I can go about adding this feature, or a simple method for determining the correct move applicable to the current situation with what I have already done?

    Read the article

  • Getting a UIImage from MySQL using PHP and jSON

    - by Daniel
    I'm developing a little news reader that retrieves the info from a website by doing a POST request to a URL. The response is a jSON object with the unread-news. E.g. the last news on the App has a timeStamp of "2013-03-01". When the user refreshes the table, it POSTS "domain.com/api/api.php?newer-than=2013-03-01". The api.php script goes to the MySQL database and fetches all the news posted after 2013-03-01 and prints them json_encoded. This is // do something to get the data in an array echo $array_of_fetched_data; for example the response would be [{"title": "new app is coming to the market", "text": "lorem ipsum dolor sit amet...", image: XXX}] the App then gets the response and parses it, obtaining an NSDictionary and adds it to a Core Data db. NSDictionary* obtainedNews = [NSJSONSerialization JSONObjectWithData:responseData options:kNilOptions error:&error]; My question is: How can I add an image to the MySQL database, store it, pass it using jSON trough a POST HTTP Request and then interpret it as an UIImage. It's clear that to store an UIImage in CoreData, they must be transform into/from NSData. How can I pass the NSData back and forth to a MySQL db using php and jSON? How should I upload the image to the db? (Serialized, as a BLOB, etc)

    Read the article

  • (Oracle) How get total number of results when using a pagination query?

    - by BestPractices
    I am using Oracle 10g and the following paradigm to get a page of 15 results as a time (so that when the user is looking at page 2 of a search result, they see records 16-30). select * from ( select rownum rnum, a.* from (my_query) a where rownum <= 30 ) where rnum > 15; Right now I'm having to run a separate SQL statement to do a "select count" on "my_query" in order to get the total number of results for my_query (so that I can show it to the user and use it to figure out total number of pages, etc). Is there any way to get the total number of results without doing this via a second query, i.e. by getting it from above query? I've tried adding "max(rownum)", but it doesn't seem to work (I get an error [ORA-01747] that seems to indicate it doesnt like me having the keyword rownum in the group by). My rationale for wanting to get this from the original query rather than doing it in a separate SQL statement is that "my_query" is an expensive query so I'd rather not run it twice (once to get the count, and once to get the page of data) if I dont have to; but whatever solution I can come up with to get the number of results from within a single query (and at the same time get the page of data I need) should not add much if any additional overhead, if possible. Please advise. Here is exactly what I'm trying to do for which I receive an ORA-01747 error because I believe it doesnt like me having ROWNUM in the group by. Note, If there is another solution that doesnt use max(ROWNUM), but something else, that is perfectly fine too. This solution was my first thought as to what might work. SELECT * FROM (SELECT r.*, ROWNUM RNUM, max(ROWNUM) FROM (SELECT t0.ABC_SEQ_ID AS c0, t0.FIRST_NAME, t0.LAST_NAME, t1.SCORE FROM ABC t0, XYZ t1 WHERE (t0.XYZ_ID = 751) AND t0.XYZ_ID = t1.XYZ_ID ORDER BY t0.RANK ASC) r WHERE ROWNUM <= 30 GROUP BY r.*, ROWNUM) WHERE RNUM > 15

    Read the article

  • cmd.exe Command Line Parsing of Environment Variables

    - by Artefacto
    I can't figure how to have cmd.exe not interpret something like %PATH% as an environment variable. Given this program: #include<stdio.h> #include<windows.h> int main(int argc, char *argv[]) { int i; printf("cmd line: %s\n", GetCommandLine()); for (i = 0; i < argc; i++) { printf("%d: %s\n", i, argv[i]); } return 0; } I have these different outputs according to the position of the arguments: >args "k\" o" "^%PATH^%" cmd line: args "k\" o" "%PATH%" 0: args 1: k" o 2: %PATH% >args "^%PATH^%" "k\" o" cmd line: args "^%PATH^%" "k\" o" 0: args 1: ^%PATH^% 2: k" o I guess it's because cmd.exe doesn't recognize the escaped \" and sees the escaped double quote as closing the first, leaving in the first case %PATH% unquoted. I say this, because if I don't quote the argument, it always works: >args ^%PATH^% "k\" o" cmd line: args %PATH% "k\" o" 0: args 1: %PATH% 2: k" o but then I can have no spaces...

    Read the article

  • How do I build a filtered_streambuf based on basic_streambuf?

    - by swestrup
    I have a project that requires me to insert a filter into a stream so that outgoing data will be modified according to the filter. After some research, it seems that what I want to do is create a filtered_streambuf like this: template <class StreamBuf class filtered_streambuf: public StreamBuf { ... } And then insert a filtered_streambuf<> into whichever stream I need to be filtered. My problem is that I don't know what invariants I need to maintain while filtering a stream, in order to ensure that Derived classes can work as expected. In particular, I may find I have filtered_streambufs built over other filtered_streambufs. All the various stream inserters, extractors and manipulators work as expected. The trouble is that I just can't seem to work out what the minimal interface is that I need to supply in order to guarantee that an iostream will have what it needs to work correctly. In particular, do I need to fake the movement of the protected pointer variables, or not? Do I need a fake data buffer, or not? Can I just override the public functions, rewriting them in terms of the base streambuf, or is that too simplistic?

    Read the article

< Previous Page | 192 193 194 195 196 197 198 199 200 201 202 203  | Next Page >