Search Results

Search found 7086 results on 284 pages for 'explain'.

Page 197/284 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• Simple Linux program that takes any HTTP/HTTPS request and returns a single page?

  - by ultrasawblade

  I have a Linux box operating as router. There's a NIC that's connected to the internet (WAN), a NIC connected to an 8-port GbE switch (LAN), and a NIC connected to a Linksys wireless N-router (WLAN). Routing between everything is working perfectly. I have security completely disabled on the wireless router, but the WLAN NIC is firewalled such that it will only accept DNS queries and PPTP VPN connections. Currently HTTP/HTTPS traffic and everything else is blocked. I would like to run something that listens on port 80/443 of the WLAN NIC, and, for non VPN'ed connections, given any HTTP/HTTPS request it will return a single webpage saying "Unauthenticated" and explain how to sign into the VPN. A transparent proxy seems to be what I need, but my searches all seem to direct me to Squid, which is already running on my server and seems overkill for this simple task. Is there a simpler, lightweight program out there that does just this or should I just suck it up and run two instances of Squid (or figure out how to configure it)? Or, is this entire VPN thing I'm doing complete nonsense and I should just enable encryption on the wireless router?

  Read the article

• Being a more attractive job candidate - Certs XOR Degree

  - by Zephyr Pellerin

  I'm currently working in an IT position, where I do helpdesk stuff, and predominantly security related issues/consulting (In the loosest sense of the term) In-House and for Service-Contract clients (as the only/acting CCSP [I guess I should say only person with Cisco experience] in my organization). I've professionally written Kernel Mode drivers for a gaming company. Among other things that I'm proud to put on a resume. I think of myself as very reasonably qualified as a System Administrator, With excellent Cisco experience, among other things I think would make a good addition to almost any IT staff in need of a new employee. However, Something has always tripped me up - Human Resources. Let me explain, I decided to skip the university route - I'm immensely glad that I did, The computer science graduates that I've met and work with rarely know much of anything about Computers (Until they gain some 'real' experience), Even when asked about Theoretical Computing fundamentals they can rattle something off about Turing Completeness but rarely do they understand the mathematical underpinnings. In short, I think instead of going to college, I'd rather pick up some real world experience. However, Apparently, Employers rarely think the same way. A quick perusal of jobs through the standard job search engine yields nothing short of a conspiracy to exclude anyone without 'A Bachelors Degree in Computer Science or Equivalent'. Interviews I've had in the past have almost always been entangled with - 1. My Age (Which I can't really change) and 2. Lack of Degree. Employers frequently disregard the CCNA/CCSP, The experience I've gained through internships, My extensive experience in x86 assembly and C, among so many other things I like to think are valuable to employers - In lieu of the fact that I don't have a piece of paper. So, AS AN EMPLOYER - Is it even worth working on my CCIE? Or should I pad my resume with certifications that are easier to acquire (Like CISSP, MSCE, Network+, etc.). Or should I ditch the whole idea and head back to get a Mathematics or CS degree?

  Read the article

• Can I get a domain controller not to act as DNS for the members?

  - by rsw

  Hi, Let me try to explain my current setup. I have one linux machine acting as DHCP and DNS (dhcpd3 and bind) in my network. This works fine, all computers I hook up to the network gets an IP address and proper DNS servers set. Let's call it 10.12.0.10 However, we also have a Windows Server 2003 Domain Controller in our network to which we add our Windows computers (running XP), let's call it 10.12.0.20. I noticed that when I run 'nslookup' on one of the windows machines, it says that the primary DNS is 10.12.0.20. This have not been much of a problem since: The Windows clients are stationary The Windows server in itself point out my real DHCP/DNS, since I can reach everything specified in it However, this turns out to be a problem when we use Laptops. They connect to the domain here and gets a DNS server, but when the user travels or connect the computer from home, we hit a problem. They are connected to their internet, but their DNS is 10.12.0.20 which they can't reach since they're at home and not at the office network. I solved this by removing the register key called "NameServer" with the value 10.12.0.20, but it gets set again whenever they logon to the domain the next time (when they get back to the office). Can I somehow make the computers take whatever DNS server they are handed when connecting to the internet or a home network, instead of always trying to reach the Domain Controller?

  Read the article

• Shrinking a large transaction log on a full drive

  - by Sam

  Someone fired off an update statement as part of some maintenance which did a cross join update on two tables with 200,000 records in each. That's 40 trillion statements, which would explain part of how the log grew to 200GB. I also did not have the log file capped, which is another problem I will be taking care of server wide - where we have almost 200 databases residing. The 'solution' I used was to backup the database, backup the log with truncate_only, and then backup the database again. I then shrunk the log file and set a cap on the log. Seeing as there were other databases using the log drive, I was in a bit of a rush to clean it out. I might have been able to back the log file up to our backup drive, hoping that no other databases needed to grow their log file. Paul Randal from http://technet.microsoft.com/en-us/magazine/2009.02.logging.aspx Under no circumstances should you delete the transaction log, try to rebuild it using undocumented commands, or simply truncate it using the NO_LOG or TRUNCATE_ONLY options of BACKUP LOG (which have been removed in SQL Server 2008). These options will either cause transactional inconsistency (and more than likely corruption) or remove the possibility of being able to properly recover the database. Were there any other options I'm not aware of?

  Read the article

• How does USB device recognition work?

  - by GorillaSandwich

  I'm curious how USB device recognition works in Windows. I imagine it's something like this: When you plug in a device, it tells Windows "here's my device ID to tell you what I am" Windows looks to see if any drivers have been installed that match that device ID. The driver probably tells Windows what the device should be called - like "BlackBerry Curve" or "Canon Printer" If so, it somehow associates that device with that driver Otherwise, it looks for a matching driver online (if you let it) Am I right? If so, that still leaves some questions. When you install drivers, where do they go? Are they files in a folder, or do they get added to the registry? What is Windows doing when it first recognizes the device, thinks, and finally says "your new device is installed and ready to use?" Where does Windows look for missing drivers? Is it in their own database? Do device manufacturers submit drivers to Microsoft for inclusion there? Can anybody explain how this process really works? Also, do other OSes do this differently?

  Read the article

• PEAP validating a secondary domain suffix

  - by sam

  Probably the title is a little bit confusing, let me explain the situation. Our company wants to implement a corporate wireless lan with PEAP authentication. unfortunately someone made a big mistake in our AD design 10 years ago. The domain name we are using "company.ch" is not owned by company but by someone else. so it is not possible to issue a public SSL certificate for the RADIUS server. Our AD is to big to rename it. We already thought about using our private PKI and rollout the CA certificate via GPO but that would only cover our corporate managed clients but not the BYOD (Smartphones, Tablets, Laptops..) Is there a way to add a secondary domain name like “company2.ch” and issue a public certificate and join that radius to that secondary domain aslwell, and configure that secondary dns suffix via DHCP for all the client pools... or is there another way with for example a new radius server which has his own domain company2.ch which is connected with some kind of trust between the company.ch doamin? sorry i'am not a client server guy.. hopefully you get my drift.!?

  Read the article

• How can I make an encrypted email message into a .p7m file?

  - by Blacklight Shining

  This is a bit complicated, so I'll explain what I'm really trying to do here: I have a Debian server, and I want to automatically email myself certain logs every week. I'm going to use cron and a bash script to copy the logs into a tarball shortly after midnight every Monday. A bash script on my home computer will then download the tarball from the server, along with a file to be used as the body of the email, and call an AppleScript to make a new email message. This is where I'm stuck—I can't find a way to encrypt and sign the email using AppleScript and Apple's mail client. I've noticed that if I put a delay in before sending the message, Mail will automatically set it to be encrypted and signed (as it normally does when I compose a message myself). However, there's no way to be sure of this when the script runs—if something goes wrong there, the script will just blindly send the email unencrypted. My solution there would be to somehow manually create a .p7m file with the tarball and message and attach it to the email the AppleScript creates. Then, when I receive it, Mail will treat it just like any other encrypted message with an attachment (right?) If there's a better way to do this, please let me know. ^^ (Ideally, everything would be done from the server, but there doesn't seem to be a way to send mail automatically without storing a password in plaintext.) (The server is running Debian squeeze; my home computer is a Mac running OS X Lion.)

  Read the article

• Firefox not displaying icons in KhanAcademy

  - by ADTC

  If you don't know what Khan Academy is, check it out. It's awesome. (For testing purpose you may view any video on the website.) My problem -- it's a minor problem, but annoying -- is that in Firefox (Windows 7), the icons below the video are shown as boxes with hex codes in them. This means the icons come from some font that isn't getting downloaded by Firefox. How it appears on Chrome (Windows 7), Safari (Mac OS X) and Stainless (Mac OS X): I checked out the source and found that the font in question is called "FontAwesome". I found this question in S.O. that may explain why this happens -- the CSS does use single quotes to enclose the font's src location. However I don't have any write access to Khan Academy servers so I can't modify the actual website. I want to know if this can be fixed in Firefox, and how. I can run Greasemonkey scripts if that would help. Also, would manually downloading the font and adding it to Windows' Fonts folder help? I tried this with the TTF font, and it does not help. For reference, the CSS that sets this font up (not processed properly by Firefox) is: @font-face { font-family:'FontAwesome'; src:url('./fontawesome-webfont.eot'); src:url('./fontawesome-webfont.eot?#iefix') format('embedded-opentype'), url('./fontawesome-webfont.woff') format('woff'), url('./fontawesome-webfont.ttf') format('truetype'), url('./fontawesome-webfont.svg#FontAwesome') format('svg'); font-weight:normal; font-style:normal } [class^="icon-"]:before, [class*=" icon-"]:before { font-family:FontAwesome; font-weight:normal; font-style:normal; display:inline-block; text-decoration:inherit }

  Read the article

• mac gets stuck in a blue screen during boot

  - by user10826

  Hi, a macbook pro 2008 unibody, after restart gets stuck in a blue screen. I used the Leopard disk and I verified and repaired permissions, which seem to be a problem, because the assistant found some wrong files. After restart I got the same problem. After googling I reset PRAM and the other (I do not remember the name now). Same problem. I check that I can boot in safe mode, although it is a lot slower. So before anything I try to make a time machine backup, hoping that I can be done from safe mode. First question: If it works, is it possible to do a clean leopard install (I do not like Snow) and migrate all user accounts from the backup, although it was done in safe mode? Second question: I read about the feature "archive and install" from the leopard disc. Is it reliable? Because I am afraid of losing all data ... Third question: I think this boot stuck has to do with the load of some program or service. It would explain why the computer does boot on safe mode and not in the normal one. I would then like to check what the computer loads during boot, but in more detail that with the information provided from /system preferecens/account/start, because there I removed everything. Where can I find more advanced information? And, if I remove programs from the safe mode, will it be effective druing the normal boot? Thanks

  Read the article

• Why Wireshark does not recognize this HTTP response?

  - by Alois Mahdal

  I have a trivial CGI script that outputs simple text content. It's written in Perl and using CGI module and it specifies only the most basic headers: print $q->header( -type => 'text/plain', -Content_length => $length, ); print $stuff; There's no apparent issue with functionality, but I'm confused about the fact that Wireshark does not recognize the HTTP response as HTTP--it's marked as TCP. Here is request and response: GET /cgi-bin/memfile/memfile.pl?mbytes=1 HTTP/1.1 Host: 10.6.130.38 User-Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; rv:11.0) Gecko/20100101 Firefox/11.0 Accept: text/html,application/xhtml+xml,application/xml;q=0.9,*/*;q=0.8 Accept-Language: cs,en-us;q=0.7,en;q=0.3 Accept-Encoding: gzip, deflate Connection: keep-alive HTTP/1.1 200 OK Date: Thu, 05 Apr 2012 18:52:23 GMT Server: Apache/2.2.15 (Win32) mod_ssl/2.2.15 OpenSSL/0.9.8m Content-length: 1048616 Keep-Alive: timeout=5, max=100 Connection: Keep-Alive Content-Type: text/plain; charset=ISO-8859-1 XXXXXXXX... And here is the packet overview (Full packet is here on pastebin) No. Time Source srcp Destination dstp Protocol Info tcp.stream abstime 5 0.112749 10.6.130.38 80 10.6.130.53 48072 TCP [TCP segment of a reassembled PDU] 0 20:52:23.228063 Frame 5: 1514 bytes on wire (12112 bits), 1514 bytes captured (12112 bits) Ethernet II, Src: Dell_97:29:ac (00:1e:4f:97:29:ac), Dst: Dell_3b:fe:70 (00:24:e8:3b:fe:70) Internet Protocol Version 4, Src: 10.6.130.38 (10.6.130.38), Dst: 10.6.130.53 (10.6.130.53) Transmission Control Protocol, Src Port: http (80), Dst Port: 48072 (48072), Seq: 1, Ack: 330, Len: 1460 Now when I see this in Wireshark: there's usual TCP handshake then the GET request shown as HTTP with preview then the next packet contains the response, but is not marked as an HTTP response--just a generic "[TCP segment of a reassembled PDU]", and is not caught by "http.response" filter. Can somebody explain why Wireshark does not recognize it? Is there something wrong with the response?

  Read the article

• Setting up port forwarding for web server

  - by reyjavikvi

  This could belong on Super User, but I thought this place was more appropiate. I want to run Apache in my computer and want to make it available to the outside world to test a couple things. Apparently, I have to go into my router's (a TP-LINK TD 8910G) settings and forward port 80 to my PC's IP. So far so good. Thing is, since the router uses a web based interface and it's kind of stupid, it told me that since I was using port 80 for this, I should access its settings through port 8080. Maybe it can't detect requests coming from the LAN, I don't know. Point is, now neither port can't access the configuration, and I can't access Internet. Specifically, trying to access anything (including 192.168.1.1, the router's settings) through port 80 turns up a blank page (maybe if I had the server running in my computer I'd get something, but I don't want to risk trying, I had to reset the router and restore the settings), and port 8080 gives a "Can't establish connection" error in Firefox (and similar ones in other browsers). Is there a way to configure the router to not redirect requests coming from inside the network? I'm a beginner with this stuff, so please try to explain in a simple way. If this is more appropiate in Super User, I'm sorry.

  Read the article

• Very different results from df after a few seconds

  - by tatus2

  When the backup moves the files from one server to the other the results from df change every few seconds in an impossible manner. The source host is running rsync. On the destination host I'm running the following command every few seconds: echo `date` `df|grep md0` Results are below: Sat Jun 29 23:57:12 CEST 2013 /dev/md0 4326425568 579316100 3527339636 15% /MD0 Sat Jun 29 23:57:14 CEST 2013 /dev/md0 4326425568 852513700 3254142036 21% /MD0 Sat Jun 29 23:57:15 CEST 2013 /dev/md0 4326425568 969970340 3136685396 24% /MD0 Sat Jun 29 23:57:17 CEST 2013 /dev/md0 4326425568 1255222180 2851433556 31% /MD0 Sat Jun 29 23:57:20 CEST 2013 /dev/md0 4326425568 1276006720 2830649016 32% /MD0 Sat Jun 29 23:57:24 CEST 2013 /dev/md0 4326425568 1355440016 2751215720 34% /MD0 Sat Jun 29 23:57:26 CEST 2013 /dev/md0 4326425568 1425090960 2681564776 35% /MD0 Sat Jun 29 23:57:27 CEST 2013 /dev/md0 4326425568 1474601872 2632053864 36% /MD0 Sat Jun 29 23:57:28 CEST 2013 /dev/md0 4326425568 1493627384 2613028352 37% /MD0 Sat Jun 29 23:57:32 CEST 2013 /dev/md0 4326425568 615934400 3490721336 15% /MD0 Sat Jun 29 23:57:33 CEST 2013 /dev/md0 4326425568 636071360 3470584376 16% /MD0 As you can see I start from USE of 15% and after 15 seconds I'm at 37% (I don't need to mention that the backup can not copy this huge amount of data in such a short time). After ~20 seconds the cycle closes. I'm again roughly at the same usage as earlier. The value is reasonable, ca. 35 Mb were copied. Can somebody explain to me what is going on? Does df only make an estimation of usage instead of used value?

  Read the article

• Why do you use a 3PAR SAN? [closed]

  - by Starfish

  If you use a 3PAR SAN, I’d like to hear what you think about it, particularly compared to the HP EVA. What do you see as its advantages over other SANs like the EVA? What’s so special about the ASIC? We had HP quote us an EVA P6500 and 3PAR V400 with equivalent storage and the 3PAR was nearly twice the cost. My site has two EVA SANs with a combined capacity of ~80 TB. We want to replace the older and larger of the two. We’ve been looking at the EVA and the 3PAR to see which would be a better fit for us. I’m struggling to understand how the 3PAR differs from the EVA from a practical technical standpoint. When I read the sales literature and speak with the HP sales engineers, they spend a lot of time talking about how the 3PAR is better because of its ASIC. It’s ASIC this and ASIC that, but when I press them on how a 3PAR with thin provisioning is better than an EVA with thin provisioning, I can’t get a straight answer. Meanwhile, one of my colleagues, who has more say regarding which SAN we get, is enamored by the 3PAR, and he can’t explain clearly to me why he wants it over the EVA. Our needs are pretty simple. We have 10 servers running VMware and ~100 VMs. We use VMware’s thin provisioning currently, but we would like to start using thin provisioning on the new SAN. We don’t have a need for SSDs or migration between storage tiers. We plan on having FC or SAS drives for our most used data and SATA/FATA drives for the lesser used data which is how we have the EVAs configured. We also do not need any SAN-level snapshotting or replication.

  Read the article

• How can I control which sound card Ubuntu uses for playback?

  - by GorillaSandwich

  I am dual-booting Ubuntu 9.04 and Windows XP but am new to Ubuntu. In Windows, I use an M-Audio Audiophile 2496 sound card for recording (because it has RCA input jacks for my mixer), but I don't use it for playback (because my speakers use a 1/8 inch jack); instead, I use the motherboard's built-in sound card. I tried to recreate this arrangement in Ubuntu, but despite selecting the built-in card for all playback under System > Preferences > Sound, I still have inconsistent results. Rhythmbox plays back through the integrated card, but Flash content in the browser and games in the OS send their audio to the Audiophile card. I have seen recommendations to use a program called "Jack" to control this, but I installed it and found it baffling. How can I control which card is used for playback, other than disabling one card (as I discovered how to do and explain below)? Also, is there a GUI for disabling hardware, or is it necessary to edit a configuration file?

  Read the article

• prevent IE8 tabs from opening as a new "process in the taskbar"

  - by Nano8Blazex

  This may have been asked before too... But, anyways. I'm using Windows 7 Ultimate, and IE 8, and have the taskbar in icon view. I'm not sure how to explain this, but I'm amazed at how each tab in IE8 seems to act like a new "process" in the taskbar (as if each tab was a window). Like... each tab acts like a different window in the taskbar although they are actually running in the same window. Now when I use IE 8 it looks (in the taskbar) like there's 15 windows open when in fact the taskbar is simply showing the 15 tabs. More simply put, it's displaying a "stack" for all of the tabs when I'd rather have the icon act like, for example, firefox so that a stack is only shown for the multiple windows. I know that they are meant to be running as separate processes to prevent crashing and the such... but is there a way to disable this strange "taskbar" effect? I'd rather have the taskbar show the main window and not the tabs individually.

  Read the article

• issues with Nginx + Passenger Production setup - Loading time/request time delay

  - by Dani Cela

  having a bit of an issue relating to request time. I have NGINX as a proxy server for a ruby on rails app running passenger. I also have a postgresql database server which is running on its own VM separate from my nginx/application server. My issue is that when I try and access my products page which does a lot of database queries, my query takes maybe 3-4 seconds. The second I flood the web server with requests, i will choke out the web server and have requests take almost 20-30 seconds to process. The rails server and database server do not crash, and the usage is not that high. Each server has more than enough memory, even cpu usage on the rails server isn't more than 85%, albeit thats high but its not maxing it out. Is my problem related to my nginx proxy server? I dont really know how to fully explain this so if you have a question please ask it and I can clarify what I mean. EDIT: to see exactly what i mean relating to the database query, see http://207.245.4.215/products

  Read the article

• Possible boot conflict?

  - by Evan Kroske

  I was installing Ubuntu on a computer on which Windows XP was already installed. The computer has multiple hard drive bays, so I decided to remove the XP HDD and install Ubuntu on a blank HDD when it was the only HDD in the system. Unfortunately, if I now try to boot Ubuntu with the Windows XP drive in the second slot, nothing will boot. However, if Windows XP is in the first slot, it will boot fine. Can anybody explain why this happens? When I was checking out the BIOS to see if something was messed up, I discovered that when Ubuntu is in the first slot, the BIOS doesn't recognize any HDDs. However, if XP is in the first slot, the BIOS recognizes both drives. Any hypotheses about why this happens? Edit: Here's the setup. I have an old server with seven SCSI HDD slots. I have five identical 68 Gb SCSI drives, but I can keep only two plugged in. XP is still installed on the first drive, but I reinstalled Ubuntu on the second drive and had Grub overwrite the XP bootloader on the first drive. Now, the setup works fine, and I can use Grub to load either XP or Ubuntu. However, if I plug in another identical blank HDD in the third slot, the computer recognizes only the XP drive and doesn't boot. Grub starts to load, then gives me a "disk not found" error. Running ls from the grub rescue prompt only shows one drive with two partitions. I guess this is a BIOS problem, but I'd still like to know what triggers it. What about a blank drive could cause the BIOS to freak out?

  Read the article

• Is the APC BR700G UPS (or similar) compatible with Active PFC power supplies?

  - by David Zaslavsky

  I'm looking at getting a UPS for my home computer. So far the APC BR700G looks very promising, except for one thing: one of the reviews on Newegg says that this UPS does not work with a power supply with Active PFC. Pros: Unit looks great, built well, very heavy, was excited to use it. Cons: Didn't research enough - many newer power supplies like my corsair 750w (and yes dells and other mainstreamers sell them too) that I bought last year have a feature called active pfc (power factor corrected). The signal for this backup battery doesn't fully support that feature and can cause issues. You can find an article on APCs site if you search their user forums for PFC. And the power supply in my computer is, in fact, an Active PFC PSU. I've already found one answer on this site claiming that it's not an issue, that "most quality supplies these days have PFC and work just fine with a UPS." That disagrees with the review on Newegg. Can someone explain this discrepancy? Also, what is it exactly about a UPS that makes it incompatible with an Active PFC PSU? (if anything) Is there some way to tell based on the technical specifications, or do I just have to hunt for reviews online to avoid wasting my money? While any input would be appreciated, I would prefer to get an answer from someone with actual experience with similar UPS's and Active PFC power supplies, who can tell me whether it works or not.

  Read the article

• Adding users to Sharepoint when they are not in the same domain

  - by jim-work

  Bear with me as I explain this, I'm working my way through Sharepoint access as I go, but I'll clarify my question as I go along. The Problem We have about 10,000 users who need access to our Sharepoint 2005 based reporting. Because our organization is migrating from one domain to another, we need to add each user twice, once for each domain. For the current domain, this is no problem, we've got a powershell script that I tweaked to add all the users in a given CSV file, this takes about 5 minutes to run. The big problem we're having is with users who are NOT in our currently active domain. Because the sharepoint server cannot authenticate the new users, we can't add them directly. What we're doing is creating a temp user, then using STSADM.EXE to migrate that test user to the proper domain/user_name for each of our 10,000 users. The creation and migration takes about 5 seconds per user, or well over 12 hours to run. The Question Has anyone encountered this before? Is there a way to add users without requiring AD authentication? Why is STSADM.EXE running so slow? Thanks a lot for any advice or direction anyone can give me.

  Read the article

• how to edit source files and commit the changes to the new website?

  - by ajsie

  i've got ubuntu installed with lamp. im using webdav to upload/download files to/from the ubuntu web server, after i have edited the php source files in netbeans. however, i wonder what is best practice for editing source files and committing these changes to the new website. cause if we are 2-3 developers, i guess we have to use svn. but i have never used it before so i wonder how it works. should i install it and then select the /var/www (apaches webroot) as the repository folder? then when i check in, all the changes will apply immediately? could someone please explain following steps: how to download, edit the source files, upload the files and see the new changes in the website. cause i have only worked with a local apache before, and it was only me. now there will be some more programmers so i have to set up a decent, central environment for this, and have to know how netbeans, svn, webdav and apache works all together. thanks!

  Read the article

• How do I reinitialise a failed RAID 5 drive using terminal on Ubuntu Server

  - by Stephen

  I've currently put together a new system and part of that has been creating a software RAID 5 using 'mdadm' in Ubuntu Server. I successfully got to the point where I create the array using: sudo mdadm --create --verbose /dev/md0 --level=5 --raid-devices=4 /dev/sda1 /dev/sdb1 /dev/sdc1 /dev/sdd1 I left it to do its thing overnight then used the following command to check on it: watch cat /proc/mdstat To which the following was returned: Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid5 sdd1[4](S) sdc1[2] sdb1[1] sda1[0](F) 5860535808 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/2] [_UU_] unused devices: <none> It appears that one has failed (and I'm not too savvy with why another is a spare). So, just to be sure that something else isn't amiss I wanted to try and re-engage the failed drive. Can someone explain how I can do that and what I should do with the spare (if anything). And also how do I know when synchronisation is complete? The tutorial I used to get this far is located here: http://sonniesedge.co.uk/2009/06/13/software-raid-5-on-ubuntu-904/ Many thanks! p.s. Here is some extra information that may help: sudo mdadm --detail /dev/md0 /dev/md0: Version : 1.2 Creation Time : Mon Jun 18 21:14:21 2012 Raid Level : raid5 Array Size : 5860535808 (5589.04 GiB 6001.19 GB) Used Dev Size : 1953511936 (1863.01 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon Jun 18 21:50:26 2012 State : clean, FAILED Active Devices : 2 Working Devices : 3 Failed Devices : 1 Spare Devices : 1 Layout : left-symmetric Chunk Size : 512K Name : myraidbox:0 (local to host myraidbox) UUID : a269ee94:a161600c:fb1665e7:bd2f27b3 Events : 13 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 17 1 active sync /dev/sdb1 2 8 33 2 active sync /dev/sdc1 3 0 0 3 removed 0 8 1 - faulty spare /dev/sda1 4 8 49 - spare /dev/sdd1

  Read the article

• Trying to install datastax opscenter - Failed to load application: cannot import name _parse

  - by gansbrest

  I'm not familiar with python, maybe someone could explain what's going on here? ec2-user@prod-opscenter-01:~ % java -version java version "1.7.0_45" Java(TM) SE Runtime Environment (build 1.7.0_45-b18) Java HotSpot(TM) 64-Bit Server VM (build 24.45-b08, mixed mode) ec2-user@prod-opscenter-01:~ % python -V Python 2.6.8 ec2-user@prod-opscenter-01:~ % openssl version OpenSSL 1.0.1e-fips 11 Feb 2013 And now the error ec2-user@prod-opscenter-01:~ % sudo /etc/init.d/opscenterd start Starting Cassandra cluster manager opscenterd Starting opscenterdUnhandled Error Traceback (most recent call last): File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 652, in run runApp(config) File "/usr/lib64/python2.6/site-packages/twisted/scripts/twistd.py", line 23, in runApp _SomeApplicationRunner(config).run() File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 386, in run self.application = self.createOrGetApplication() File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 451, in createOrGetApplication application = getApplication(self.config, passphrase) --- <exception caught here> --- File "/usr/lib64/python2.6/site-packages/twisted/application/app.py", line 462, in getApplication application = service.loadApplication(filename, style, passphrase) File "/usr/lib64/python2.6/site-packages/twisted/application/service.py", line 405, in loadApplication application = sob.loadValueFromFile(filename, 'application', passphrase) File "/usr/lib64/python2.6/site-packages/twisted/persisted/sob.py", line 210, in loadValueFromFile exec fileObj in d, d File "bin/start_opscenter.py", line 1, in <module> from opscenterd import opscenterd_tap File "/usr/lib/python2.6/site-packages/opscenterd/opscenterd_tap.py", line 37, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/OpsCenterdService.py", line 13, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/ClusterServices.py", line 22, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/WebServer.py", line 40, in <module> File "/usr/lib/python2.6/site-packages/opscenterd/Agents.py", line 18, in <module> exceptions.ImportError: cannot import name _parse Failed to load application: cannot import name _parse Maybe there are open source alternatives to monitoring cassandra I should look at? Thanks a lot

  Read the article

• Memory modules not running at rated speeds.

  - by Wesley

  Hi all, I'm having some odd memory issues with my build. Here are my specs right now: QDI Superb 4 motherboard Intel Pentium 4 Northwood 2.4GHz (512KB L2, 533MHz FSB) 3x 256MB PC2100 DDR266 RAM 16MB NVIDIA TNT2 Pro AGP Seagate 80GB IDE HDD Generic USB 2.0 PCI Generic Modem PCI Bestec 250W PSU To be even more specific, here are the current brands and models of each module: Kingston KVR266X64C25/256 Samsung PC2100U-25331-Z SMART SM5643285D4N0CHM0H Supposedly, they are all PC2100 266MHz modules with a latency of 2.5. Looking in Speccy, the Kingston module is somehow running at a speed of PC2300 ~284MHz. I've never overclocked RAM at all as I don't know how to. However, when I first started the computer, I had the SMART module in place first and then reset the BIOS settings, including the integrated overclocking options. However, this still doesn't explain why the Kingston module runs at a higher speed than the SMART and Samsung module. Why is it like this? On a side note, where could I find the motherboard manual for the QDI Superb 4? Thanks in advance.

  Read the article

• Firefox cannot render icons from Font Awesome webfont set

  - by ADTC

  In Firefox (Windows 7), icons and glyphs that are called from the Font Awesome package do not render properly. An example of this can be seen on the Khan Academy website. Below the video the icons are shown as boxes with hex codes in them. This means that it isn't getting downloaded by Firefox. How it appears on Chrome (Windows 7), Safari (Mac OS X) and Stainless (Mac OS X): I found this question on Stack Overflow that may explain why this happens -- the CSS does use single quotes to enclose the font's src location. However, I don't have any write access to Khan Academy servers so I can't modify the actual website. I want to know if this can be fixed in Firefox, and how. I can run Greasemonkey scripts if that would help. I've already tried manually downloading the font and adding it to Windows' Fonts folder but this does not help. For reference, the CSS that sets this font up (not processed properly by Firefox) is: @font-face { font-family:'FontAwesome'; src:url('./fontawesome-webfont.eot'); src:url('./fontawesome-webfont.eot?#iefix') format('embedded-opentype'), url('./fontawesome-webfont.woff') format('woff'), url('./fontawesome-webfont.ttf') format('truetype'), url('./fontawesome-webfont.svg#FontAwesome') format('svg'); font-weight:normal; font-style:normal } [class^="icon-"]:before, [class*=" icon-"]:before { font-family:FontAwesome; font-weight:normal; font-style:normal; display:inline-block; text-decoration:inherit }

  Read the article

• How do I rename my old Program Files folder?

  - by SteveJ

  I installed a new SSD as my boot drive (C:), installed a fresh version of Windows 7 64-bit, and kept my existing SATA drive in the system (D:). I want to keep using my D: drive for file storage (no sense filling up the SSD with stuff that isn't performance critical) and I haven't formatted the D: drive because there's stuff on there I want to keep. I also want to create a new "D:\Program Files" folder so I can install apps that aren't performance-critical there. So I decided I'd rename the existing "D:\Program Files" from my old Windows install to "D:\Old Program Files" and then create a new "D:\Program Files" directory. Easy, right? I can see "D:\Program Files" just fine in Explorer. I right click, select Rename, and type "Old Program Files." I get the alert that says I need Admin permission to do this, so I press the confirm button with the shield. But the folder still appears as "Program Files" in Explorer. I jump out to the command line, and it appears as "Old Program Files" when I do a dir. I can even do mkdir "Program Files" and when I do a dir they both appear. But in the Explorer GUI, it looks like I have two "Program Files" folders. This will be confusing during app installation because I won't be able to tell which one is which. I've tried poking around in the properties tab of the old folder, but can't find anything that would explain what's causing the issue. How do I rename the old Program Files folder?

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >