Search Results

Search found 12537 results on 502 pages for 'solid state'.

Page 197/502 | < Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >

• missing files after reassemble of RAID-5

  - by Kris_R

  I had to open my file-server's housing on Sunday to replace a faulty fan. What I didn't see was that one of the sata-cables was not properly connected. The 1st thing I did after a reboot was a check of the RAID status and it showed immediately that one drive is missing. Till this moment the device was not used (however it was mounted, so I'm not 100% sure that system did nothing). I stopped md0 and re-plugged the cable: mdadm --stop /dev/md0 poweroff After another reboot I checked the removed drive: mdadm --examine /dev/sdd1 ... Checksum : 3276bc1d - correct Events : 315782 Layout : left-symmetric Chunk Size : 32K Number Major Minor RaidDevice State this 0 8 49 0 active sync /dev/sdd1 0 0 8 49 0 active sync /dev/sdd1 1 1 8 65 1 active sync /dev/sde1 2 2 8 33 2 active sync /dev/sdc1 3 3 8 17 3 active sync /dev/sdb1 I was a bit surprised that it was shown as active (even if earlier mdadm said, that this device was removed from array) and its checksum was OK. I recreated RAID with: mdadm --assemble /dev/md0 --scan The command mdadm --detail /dev/md0 showed that all drives were running and system was in "clean" state. I mounted the device md0 and then came hic-cup. I wanted to work on one of the last files that I had been using before all the situation and it was not there. In another place I missed actually all files from the directory where I was working. As far as I can see most of the files that are older than a few days are intact but some newer ones are missing. Now the big question: what would be your advice? Is there a way to get these data? I thought about removing the drive that was earlier labeled by mdadm and rebuild array with another empty HDD. I've found that after re-assemble the "broken" drive has another label (changed from sdd to sdb). Can this have influence on rebuilt process? If yes, how to reassemble the array properly? I'm sure the SATA-cables are connected still in the same order to the controller. p.s. Please no advises like "restore from backup". I'm doing back-ups on Sunday's night and this happened in the late afternoon, so backup is not really options for me. p.s.s. I asked this question on Unix&Linux but no answer came up during last two days. I'm getting quite anxious. Sorry for duplicating if any of you reading the other forum.

  Read the article

• How do I configure the number of worker threads used by SqlServer 2005 Agent

  - by Decker

  How can I increase the limit of worker threads from the default 10 for SQL Server 2005 SqlAgent? I have 9 jobs that run almost continuously and that leaves only one available thread for the rest of the scheduled jobs. Oftentimes, when no thread is available, I will see the jobs in "Waiting for worker thread" state. I'd like to increase the number to about 12 (which should do the trick for me). Any idea where this is set?

  Read the article

• How to configure multiple VLAN's on a lacp link aggregation on openindiana(oi_151a7)?

  - by reco

  i have 4 links aggregated. $ dladm show-link LINK CLASS MTU STATE BRIDGE OVER igb0 phys 1500 up -- -- igb1 phys 1500 up -- -- igb2 phys 1500 up -- -- igb3 phys 1500 up -- -- aggr0 aggr 1500 up -- igb0 igb1 igb2 igb3 i managed to create one VLAN on the aggr0 link: $ dladm show-vlan LINK VID OVER FLAGS vlan1 9 aggr0 ----- if i try to add more i get the following error: $ dladm create-vlan -v 3 -l aggr0 vlan2 dladm: create operation failed: invalid argument

  Read the article

• Forwarding udp ports iptables packets "lost"?

  - by Dindihi

  I have a Linux router (Debian 6.x) where i forward some ports to internal services. Some tcp ports (like 80, 22...) are OK. I have one Application listening on port 54277udp. No return is coming from this app, i only get Data on this port. Router: cat /proc/sys/net/ipv4/conf/all/rp_filter = 1 cat /proc/sys/net/ipv4/conf/eth0/forwarding = 1 cat /proc/sys/net/ipv4/conf/ppp0/forwarding = 1 $IPTABLES -t nat -I PREROUTING -p udp -i ppp0 --dport 54277 -j DNAT --to-destination $SRV_IP:54277 $IPTABLES -I FORWARD -p udp -d $SRV_IP --dport 54277 -j ACCEPT Also MASQUERADING internal traffic to ppp0(internet) is active & working. Default Policy INPUT&OUTPUT&FORWARD is DROP What is strange, when i do: tcpdump -p -vvvv -i ppp0 port 54277 I get a lot of traffic: 18:35:43.646133 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.652301 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.653324 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.655795 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.656727 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.659719 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 tcpdump -p -i eth0 port 54277 (on the same machine, the router) i get much less traffic. also on the destination $SRV_IP there are only a few packets coming in, but not all. INTERNAL SERVER: 19:15:30.039663 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.276112 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.726048 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 So some udp ports are "ignored/dropped" ? Any idea what could be wrong? Edit: This is strange: The Forward rule has data packets, but the PREROUTING rule has 0 packets... iptables -nvL -t filter |grep 54277 Chain FORWARD (policy DROP 0 packets, 0 bytes) 168 8401 ACCEPT udp -- * * 0.0.0.0/0 192.168.215.4 state NEW,RELATED,ESTABLISHED udp dpt:54277 iptables -nvL -t nat |grep 54277 Chain PREROUTING (policy ACCEPT 405 packets, 24360 bytes) 0 0 DNAT udp -- ppp0 * 0.0.0.0/0 my.external.ip udp dpt:54277 state NEW,RELATED,ESTABLISHED to:192.168.215.4

  Read the article

• Combining two operators in Evil-mode Emacs

  - by Dyslexic Tangent

  In vim I've remapped > and < when in visual mode to >gv and <gv respectively, like so: vnoremap > >gv vnoremap < <gv Since my target for this question are folks experienced with emacs and not vim, what > and < do is indent/dedent visually selected text. What gv does is reselect the previously selected text. These maps cause > and < to indent/dedent and then reselect the previously selected text. I'm trying out emacs with evil-mode and I'd like to do the same, but I'm having some difficulty figuring out how, exactly, to accomplish the automatic reselection. It looks like I need to somehow call evil-shift-right and evil-visual-restore sequentially, but I don't know how to create a map that will do both, so I tried creating my own function which would call both sequentially and map that instead, but it didn't work, possibly due to the fact that both of them are defined, not as functions with defun but instead as operators with evil-define-operator. I tried creating my own operators: (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) (evil-visual-restore)) (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) (evil-visual-restore)) but that doesn't restore visual as expected. A stab in the dark gave me this: (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) ('evil-visual-restore)) (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) ('evil-visual-restore)) but that selects one additional line whenever it is supposed to reselect. For now I've been using the following, which only has the problem where it reselects an additional line in the < operator. (evil-define-operator shift-right-reselect (beg end) (evil-shift-right beg end) (evil-visual-make-selection beg end)) (evil-define-operator shift-left-reselect (beg end) (evil-shift-left beg end) (evil-visual-make-selection beg end)) and I've mapped them: (define-key evil-visual-state-map ">" 'shift-right-reselect) (define-key evil-visual-state-map "<" 'shift-left-reselect) any help / pointers / tips would be greatly appreciated. Thanks in advance.

  Read the article

• Configure ASP.NET Application to Read Mapped Network Drive

  - by Bob

  Is it possible to configure an ASP.NET application under IIS 7 so it can read files stored in a mapped network drive? I'm not trying to serve up the contents of the drive. I simply need to read the contents within the ASP.NET application. I've searched the Web and haven't really found a solid answer. The questions in my mind are: Is this possible via configuration (i.e. I cannot modify the client code)? If so, what are the step by step instructions. If it is not possible, I'm fine with that. I already know UNC paths work but using them drastically changes the work flow. Thanks! Bobby

  Read the article

• Ubuntu hardy to intrepid upgrade hung on starting bluetooth

  - by srboisvert

  I have no bluetooth. Preliminary googling indicates that is probably an issue with some usb devices. I had an external drive, a mouse and a network dongle attached. It is just stalled during the Installing the Upgrades phase - the last commands were "Creating device nodes" Cancel will leave the system in a broken state. What next?

  Read the article

• What Issue Tracking System to select?

  - by Mikee

  What Issue Tracking Sytem is the most appropriate for fast, big, multilingual and international websites? The system has to handle both technical and content/editorial issues. What's the size and type of your site do you run? Whart System are you using for the keeping it state of the art? Thanks a lot for sharing your good or bad experience.

  Read the article

• Low framerate on background apps

  - by user1698923

  My problem is that when a game is running in the foreground, in Full Screen mode, any applications on my second monitor (such as youtube videos, videos, not app specific) drop their frame-rate to about 2-3 FPS. It seems like some sort of power management option that I can't track down. As far as I can tell, it's not due to the GPU not being able to keep up. For instance, my PC can play League of Legends at about 280FPS when the framerate is uncapped. If i cap it at 60FPS using the in-game option, it has no affect on the performance of the background app. Summary Operating System Windows 8 Pro 64-bit CPU Intel Core i7 3820 @ 3.60GHz 42 °C Sandy Bridge-E 32nm Technology RAM 12.0GB Triple-Channel DDR3 @ 533MHz (7-7-7-20) Motherboard Gigabyte Technology Co., Ltd. X79-UD3 (SOCKET 0) 37 °C Graphics DELL U2713HM (2560x1440@59Hz) DELL U2713HM (2560x1440@59Hz) 1280MB NVIDIA GeForce GTX 570 (Gigabyte) 58 °C Hard Drives 212GB Volume0 (RAID) 1863GB Western Digital WDC WD20EARS-00MVWB0 (SATA) 36 °C 1863GB Western Digital WDC WD20EARS-00MVWB0 (SATA) 34 °C Optical Drives No optical disk drives detected Audio ASUS Xonar Essence STX Audio Device Operating System Windows 8 Pro 64-bit Computer type: Desktop Graphics Monitor 1 Name DELL U2713HM on NVIDIA GeForce GTX 570 Current Resolution 2560x1440 pixels Work Resolution 2560x1400 pixels State Enabled, Output devices support Multiple displays Extended, Secondary, Enabled Monitor Width 2560 Monitor Height 1440 Monitor BPP 32 bits per pixel Monitor Frequency 59 Hz Device \\.\DISPLAY4\Monitor0 Monitor 2 Name DELL U2713HM on NVIDIA GeForce GTX 570 Current Resolution 2560x1440 pixels Work Resolution 2560x1400 pixels State Enabled, Output devices support Multiple displays Extended, Primary, Enabled Monitor Width 2560 Monitor Height 1440 Monitor BPP 32 bits per pixel Monitor Frequency 59 Hz Device \\.\DISPLAY5\Monitor0 NVIDIA GeForce GTX 570 Manufacturer NVIDIA Model GeForce GTX 570 GPU GF110 Device ID 10DE-1086 Revision A2 Subvendor Gigabyte (1458) Series GeForce GTX 500 Current Performance Level Level 3 Current GPU Clock 845 MHz Current Memory Clock 1900 MHz Current Shader Clock 1690 MHz Voltage 0.988 V Technology 40 nm Die Size 520 mm² Release Date Dec 07, 2010 DirectX Support 11.0 OpenGL Support 5.0 Bus Interface PCI Express x16 Temperature 57 °C Driver version 9.18.13.2018 BIOS Version 70.10.55.00.01 ROPs 40 Shaders 512 unified Memory Type GDDR5 Memory 1280 MB Bus Width 64x5 (320 bit) Filtering Modes 16x Anisotropic Noise Level Moderate Max Power Draw 219 Watts Count of performance levels : 3 Level 1 - "Default" GPU Clock 50 MHz Memory Clock 135 MHz Shader Clock 101 MHz Level 2 - "2D Desktop" GPU Clock 405 MHz Memory Clock 324 MHz Shader Clock 810 MHz Level 3 - "3D Applications" GPU Clock 845 MHz Memory Clock 1900 MHz Shader Clock 1690 MHz Things I've tried: 1) Updating the graphics driver 2) Setting windows power mode to High Performance 3) Reset Nvidia Global Performance settings to default

  Read the article

• How to Block a HTTP Website along with Its All Subdomain using IPTABLE

  - by netnovice

  I run a small HTTP web proxy site . We can not modify anything there in Proxy program. Few users mainly use Yahoo Web mail for Spamming and We need to block yahoo web mail access only ( complete yahoo website is also Ok) through our proxy . specially .mail.yahoo.com.. Like - we need to block URL like - http://uk-mg61.mail.yahoo.com http://in-mg61.mail.yahoo.com etc. etc. Note : We generaly open http://mail.yahoo.com in browser - but after loggin in it forwards it to Urls like above but all those are subdomain of mail.yahoo.com My target is if we can get all IP list for all available subdomain of mail.yahoo.com I can block it totally . We can only use IPTABLE ...I know using proxy itself we can check HTTP header and check Host field for .mail.yahoo.com. and block it. Solution : Follwoign what I did using IPtable . I collected IP CIDR block for yahoo mainly for yahoo web mail ( mail.yahoo.com ) as much as possible ( using linux host and whois command ) [ like 66.163.160.0/19 nd 98.136.0.0/14 etc ] and applied follwing command Like iptables -A OUTPUT -p tcp -d 66.163.160.0/19 -m state --state NEW -j DROP etc. Things are working fine. user can not access yahoo mail BUT the problem is I need to be updated with the avaialble CIDR YAHOO IP list ... I am ready to do it every week. I collected many from Net... You know theer are countles subdomain of mail.yahoo.com and seems every week Yahoo adding new IP... But what I observed some time user can bypass our rule and the reason obvously all the avaialble Ips are not entered in IPtable yet. What we need to do is enter all Ips of mail.yahoo.co But where do I find all subdomain for mail.yahoo.com I know we can get it from DNS but I must not be allowed to make DNS axfr query. Also doing reverse DNS will have performance issue. I want to know all subdomain of .mail.yahoo.c Can I get it from yahoo site. I have the list of all YAHOO smtp IP....but I need webmail Ip... ( http://public.yahoo.com/carloc/ymail.html ) Can you please share your Idea. Thank you

  Read the article

• why does Virtualbox use 15-20% CPU when VM is paused?

  - by laramichaels

  Hello, I run VirtualBox 3.1 on Ubuntu with a Win XP guest. I have noticed to my surprise that when I pause the VM (its screen grays out) VirtualBox continues using 15-20% of the host's CPU. Is this normal behavior? Is there a way to avoid it? (Without saving the state of the VM and exiting VirtualBox.) Thanks for any insights! ~lara

  Read the article

• Windows 7 Standy/Hibernate Freeze/Lockup

  - by Kyle

  I'm running Windows 7 Ultimate on a MSI U100 Netbook which often experiences a lockup or freeze whilst hibernating or shutting down. I have a friend with an Asus netbook running Windows 7 who has experienced the same issue. This happens to me perhaps 1-2 times a week, and is frustrating as hell because it will just sit there running flat out (the fan goes to max after a while) until the battery dies if I don't notice it first. Just wondering if anyone has had any similar issues or might be able to point me in the right direction. The freeze occurs when the screen has faded to black. The HDD light flickers for a few moments then just sticks on solid. I haven't been able to isolate any apps which may be causing this either. It will be fine one standby, and lock up the next with no new apps open. Any thoughts greatly appreciated. Cheers, Kyle

  Read the article

• Gateway on a virtual network interface used by LXC guests

  - by linkdd

  I'm currently having some problems with configuring a gateway for a virtual network interface. Here is what I've done : I created a virtual network interface : # brctl addbr lxc0 # brctl setfd lxc0 0 # ifconfig lxc0 192.168.0.1 promisc up # route add -net default gw 192.168.0.1 lxc0 The output of ifconfig gave me what I wanted : lxc0 Link encap:Ethernet HWaddr 22:4f:e4:40:89:bb inet adr:192.168.0.1 Bcast:192.168.0.255 Masque:255.255.255.0 adr inet6: fe80::88cf:d4ff:fe47:3b6b/64 Scope:Lien UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:623 errors:0 dropped:0 overruns:0 frame:0 TX packets:7412 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 lg file transmission:0 RX bytes:50329 (49.1 KiB) TX bytes:335738 (327.8 KiB) I configured dnsmasq to provide a DNS server (using the default : 192.168.1.1) and a DHCP server. Then, my LXC guest is configured like this : lxc.network.type=veth lxc.network.link=lxc0 lxc.network.flags=up Every thing is working perfectly, my containers have an IP (192.168.0.57 and 192.168.0.98). I can ping the host and the containers from the containers and from the host : (host)# ping -c 3 192.168.0.114 PING 192.168.0.114 (192.168.0.114) 56(84) bytes of data. 64 bytes from 192.168.0.114: icmp_req=1 ttl=64 time=0.044 ms 64 bytes from 192.168.0.114: icmp_req=2 ttl=64 time=0.038 ms 64 bytes from 192.168.0.114: icmp_req=3 ttl=64 time=0.043 ms --- 192.168.0.114 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1998ms rtt min/avg/max/mdev = 0.038/0.041/0.044/0.007 ms (guest)# ping -c 3 192.168.0.1 PING 192.168.0.1 (192.168.0.1) 56(84) bytes of data. 64 bytes from 192.168.0.1: icmp_req=1 ttl=64 time=0.048 ms 64 bytes from 192.168.0.1: icmp_req=2 ttl=64 time=0.042 ms 64 bytes from 192.168.0.1: icmp_req=3 ttl=64 time=0.042 ms --- 192.168.0.1 ping statistics --- 3 packets transmitted, 3 received, 0% packet loss, time 1999ms rtt min/avg/max/mdev = 0.042/0.044/0.048/0.003 ms Now, it's time to configure the host as a gateway for the network 192.168.0.0/24 : #!/bin/sh # Clear rules iptables -F iptables -t nat -F iptables -t mangle -F iptables -X iptables -A FORWARD -i lxc0 -o eth0 -j ACCEPT iptables -A FORWARD -i eth0 -o lxc0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward The final test failed completely, ping the outside : (guest)# ping -c 3 google.fr PING google.fr (173.194.67.94) 56(84) bytes of data. From 192.168.0.1: icmp_seq=3 Redirect Host(New nexthop: wi-in-f94.1e100.net (173.194.67.94)) From 192.168.0.1 icmp_seq=1 Destination Host Unreachable From 192.168.0.1 icmp_seq=2 Destination Host Unreachable From 192.168.0.1 icmp_seq=3 Destination Host Unreachable --- google.fr ping statistics --- 3 packets transmitted, 0 received, +3 errors, 100% packet loss, time 2017ms Did I missed something ?

  Read the article

• Locking down a box on the web

  - by glowcoder

  I'm a Java developer who is looking to put a game on the web. I'm not much of a web or server guy, though, and frankly I seem a little lost at where I should start with putting something on the web. My application works fine on my machine, and I'm sure I can make it work fine on any box I put it on. But the security of that box is pretty important. If I sign up for a standard hosting package (let's say from GoDaddy or something) can I simply tell them "make port 12345 open for communication" and let them handle the rest of the security details? If I can't, what are the things I'm going to need to know to prevent my game server from getting hacked to shreds? (Links to solid resources fine by me!) Thanks!

  Read the article

• Should a webserver in the DMZ be allowed to access MSSQL in the LAN?

  - by Allen

  This should be a very basic question and I tried to research it and couldn't find a solid answer. Say you have a web server in the DMZ and a MSSQL server in the LAN. IMO, and what I've always assumed to be correct, is that the web server in the DMZ should be able to access the MSSQL server in the LAN (maybe you'd have to open a port in the firewall, that'd be ok IMO). Our networking guys are now telling us that we can't have any access to the MSSQL server in the LAN from the DMZ. They say that anything in the DMZ should only be accessible FROM the LAN (and web), and that the DMZ should not have access TO the LAN, just as the web does not have access to the LAN. So my question is, who is right? Should the DMZ have access to/from the LAN? Or, should access to the LAN from the DMZ be strictly forbidden. All this assumes a typical DMZ configuration.

  Read the article

• Windows annoyances

  - by guillermooo

  Rules: Post only one annoyance per answer. State the Windows version. Suggest a workaround/fix or indicate what you'd like to change.

  Read the article

• Quantifying the effects of partition mis-alignment

  - by Matt

  I'm experiencing some significant performance issues on an NFS server. I've been reading up a bit on partition alignment, and I think I have my partitions mis-aligned. I can't find anything that tells me how to actually quantify the effects of mis-aligned partitions. Some of the general information I found suggests the performance penalty can be quite high (upwards of 60%) and others say it's negligible. What I want to do is determine if partition alignment is a factor in this server's performance problems or not; and if so, to what degree? So I'll put my info out here, and hopefully the community can confirm if my partitions are indeed mis-aligned, and if so, help me put a number to what the performance cost is. Server is a Dell R510 with dual E5620 CPUs and 8 GB RAM. There are eight 15k 2.5” 600 GB drives (Seagate ST3600057SS) configured in hardware RAID-6 with a single hot spare. RAID controller is a Dell PERC H700 w/512MB cache (Linux sees this as a LSI MegaSAS 9260). OS is CentOS 5.6, home directory partition is ext3, with options “rw,data=journal,usrquota”. I have the HW RAID configured to present two virtual disks to the OS: /dev/sda for the OS (boot, root and swap partitions), and /dev/sdb for a big NFS share: [root@lnxutil1 ~]# parted -s /dev/sda unit s print Model: DELL PERC H700 (scsi) Disk /dev/sda: 134217599s Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 63s 465884s 465822s primary ext2 boot 2 465885s 134207009s 133741125s primary lvm [root@lnxutil1 ~]# parted -s /dev/sdb unit s print Model: DELL PERC H700 (scsi) Disk /dev/sdb: 5720768639s Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 34s 5720768606s 5720768573s lvm Edit 1 Using the cfq IO scheduler (default for CentOS 5.6): # cat /sys/block/sd{a,b}/queue/scheduler noop anticipatory deadline [cfq] noop anticipatory deadline [cfq] Chunk size is the same as strip size, right? If so, then 64kB: # /opt/MegaCli -LDInfo -Lall -aALL -NoLog Adapter #0 Number of Virtual Disks: 2 Virtual Disk: 0 (target id: 0) Name:os RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:65535MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 ... physical disk info removed for brevity ... Virtual Disk: 1 (target id: 1) Name:share RAID Level: Primary-6, Secondary-0, RAID Level Qualifier-3 Size:2793344MB State: Optimal Stripe Size: 64kB Number Of Drives:7 Span Depth:1 Default Cache Policy: WriteBack, ReadAdaptive, Direct, No Write Cache if Bad BBU Current Cache Policy: WriteThrough, ReadAdaptive, Direct, No Write Cache if Bad BBU Access Policy: Read/Write Disk Cache Policy: Disk's Default Number of Spans: 1 Span: 0 - Number of PDs: 7 If it's not obvious, virtual disk 0 corresponds to /dev/sda, for the OS; virtual disk 1 is /dev/sdb (the exported home directory tree).

  Read the article

• Vim Stuck In Insert Mode

  - by Levi Hackwith

  I've been using Vim for several months now via my web host (they allow putty access). All of a sudden, the escape key has become unresponsive. I cannot exist insert or any other mode by simply hitting escape. I have to hit F1 which brings up the help in vim and kicks me into command mode. I'm most certain that my escape key on my keyboard is functioning fine since all of my windows shortcuts that use the escape key operate normally. I know this is a ridiculous question and I'm certain there's a lot more to look into regarding a solution. What I really need is a solid lead as to where to start looking. Things that might help: I'm using vim via putty I'm logging in using jailshell I'm not root

  Read the article

• What is Openflow?

  - by jmreicha

  Okay, I've been thinking about this a lot recently but I think I may be more confused now than I was originally when I started. I can't find anything about Openflow that helps me understand what it is. None of the websites I have found have given a solid definition of what Openflow really is and what it does, at least if they do I can't comprehend it. Is there an easy way to explain this standard so my small brain can understand it? I understand that Openflow is a way to abstract networking away from switches and can be managed from software, etc etc. I feel like it might be a little easier to grasp if I had exmaples of application. But so far searching has failed me. What is Openflow? How can it help me? What does it offer?

  Read the article

• High quality (commercial) Text to English speech software? [closed]

  - by bodacydo

  I'm working on a software project and I am researching text-to-speech products to use. Does anyone know what are the current state of the art text-to-speech systems? Ideally the speech should be indistinguishable from a native American or English speaker. I'm looking for products with SDK or API that I can easily hook into. Just to clarify and iterate on my question - I'm not looking for things like Microsoft's free text-to-speech synthesis program, I'm looking for a high quality professional product.

  Read the article

• Why is my router not routing?

  - by dwj

  Starting a week and half ago my router stopped working with my cable modem. I went to sleep with it working and woke up with it not. I swapped in another router and am still having issues; I was gone for 10 days so now I'm back to trying to figure it out. While I was gone I left everything (cable modem, router, and computer) powered off. My setup: Comcast Ambit cable modem (from Comcast) Netgear WGR614 v4 router -- replaced with Linksys WRT54GS v1.1 Windows XP SP3 other computers, all currently unplugged The modem is using the firmware (ver 2.105.2001) provided by Comcast; hardware version 1.3 The Linksys router is using FW ver 4.71.4 (latest for this release of HW), factory defaults I am only using the wired connections; no wireless. I have swapped out all of the cat5 cable. If I plug my computer directly into the cable modem, I can ping by name or number. Everything works perfectly. If I plug my computer into the router and the router into the modem, I cannot access anything outside of my local network. This is the exact setup I've used for the past 5 years; there were no changes in the past year. Now here's the interesting part: I can log into the Linksys router and get status information from it; everything appears good. Using the Diagnostics, I can run ping and traceroute to any site on the internet. These work perfectly. From my computer, I can ping the router and the modem. However, I cannot ping anything on the internet by with name or number. If I plug in another computer, I can ping it successfully. I've included two transcripts below that show these two attempts. Addresses, DNS, gateways, etc. look good. I cannot access the internet through either router. I am at a loss here. Suggestions? Help! Computer to Router to Cable Modem C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:21:55 PM Lease Expires . . . . . . . . . . : Tuesday, March 23, 2010 10:21:55 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Ping request could not find host google.com. Please check the name and try again . C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\ Computer to Cable Modem Directly C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 DHCP Server . . . . . . . . . . . : 68.87.76.10 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:18:50 PM Lease Expires . . . . . . . . . . : Monday, March 22, 2010 11:12:31 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Pinging google.com [74.125.19.99] with 32 bytes of data: Reply from 74.125.19.99: bytes=32 time=20ms TTL=55 Reply from 74.125.19.99: bytes=32 time=17ms TTL=55 Reply from 74.125.19.99: bytes=32 time=28ms TTL=55 Reply from 74.125.19.99: bytes=32 time=18ms TTL=55 Ping statistics for 74.125.19.99: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 17ms, Maximum = 28ms, Average = 20ms C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=17ms TTL=55 Reply from 74.125.19.104: bytes=32 time=16ms TTL=55 Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 16ms, Maximum = 18ms, Average = 17ms C:\

  Read the article

• NFS automounts hang

  - by Yang

  Hi, I have been mounting NFS shares on my x86 Ubuntu with NIS/am-utils fine for a long time, but today my system got into a state where it could no longer access automounted directories and instead frequently got hung up trying to access them, returning either "Input/output error" or "Permission denied" (almost randomly), as well as "stale file handle." I can, however, manually mount that share fine. Restarting am-utils doesn't help get my system out of its funk; is there any other way of getting my system un-stuck?

  Read the article

• 3ware RAID in Windows 7

  - by scribbles

  Just moved a 3ware 9500S-8 raid card and a few drives from my linux box into my win7 box. Windows Updates picked up the 3ware driver and installed it. After a reboot I checked Disk Management and it shows the array as one solid drive with the correct size. The only issue is that its not assigned a drive letter and when I right click on it my only option is to Convert to Dynamic Disk... From what I've read this is not something I want to do. What are my options?

  Read the article

• Saving ink when printing?

  - by Walkerneo

  I need a map of the SMC campus, but I'm really sick of running out of ink after printing one thing and then having to pay ridiculous sums of money to buy more ink. The map is here: http://www.smc.edu/campusmap/images/SMC-2D-Map_12-Clr_9-10_crop.jpg I would print in black and white, but I'm wondering if there are any chrome or photoshop extensions, or even websites that transform the image into something more ink-conservative. For example, I don't need the buildings to be a solid color, or the roads to be gray, so it would be a tremendous waste of ink to print it as is. Anyone know anything like I'm talking about?

  Read the article

• Lync server 2010 Active Directory Preparation with a Windows Server 2003 DC

  - by juFo

  I'm trying to install Lync server 2010 but i'm stuck for a while now with the "Active Directory Preparation" part of the Lync server 2010 installation. The "Prepare Schema" fails with the following error: "Step 1: Prepare Schema Run once per deployment. Extends the schema for Lync Server. Not Available: Failure occurred while attempting to check the schema state. Please ensure Active Directory is reachable." screenshot: https://skydrive.live.com/#cid=CB15F1A932B364BE&id=CB15F1A932B364BE%211742 The situation: 1 server with Windows Server 2003 (x86), which is the only Domain Controller (DC) 1 server with Windows Server 2008 R2 (x64) where Lync should be installed. First I have found that the DFL/FFL were not correct: On the DC (server2003) I have changed the Domain Functional Level to Windows Server 2003 and also the Forest Functional Level to Windows Server 2003. If I check these settings on the Server2008 with Active Directory Domains and Trusts, I see indeed that the DFL and FFL are being set to Windows Server 2003. (Windows Server 2003 is the minimum required for Lync server 2010) I tried the Lync AD Preparation again but still got the same message: https://skydrive.live.com/#cid=CB15F1A932B364BE&id=CB15F1A932B364BE%211742 I'm logged in on the Server2008 and Server2003 with the domain administrator account. If I check "Active Directory Users and Computers" and go to the directory Users and watch the properties from the Administrator User then it is also a Member of: Domain Admins Domain Users Enterprise Admins Schema Admins Group Policy Creator Owners The firewall on the server2008 is turned off, still nog working So now my question is: what should I do to make the Lync setup (Active Directory Preparation) work? (I would appreciate clear step-by-step suggestions to check.) Thanks in advance. Update 1: Now I've extended AD successfully on the 2003 DC, using this link: http://blogs.pointbridge.com/Blogs/sloan_jason/Pages/Post.aspx?_ID=2 but when I check the Active Directory Preparation again on the Lync install, it still gives me the same error as in the screenshot I've provided. Update 2: I found out that there is a log on "C:\Users\\AppData\Local\Temp\ with this: Get-CSDomainState Get Domain State Error: An error occurred: "Microsoft.Rtc.Management.ADConnect.NoSuitableServerFoundException" "No suitable domain controller was found in domain "OurDomain.LOCAL". Errors:\r\n"OurDCserver.OurDomain.LOCAL5.2 (3790)5.2 (3790) Service Pack1OurDCserver.OurDomain.LOCAL5.2 (3790)5.2 (3790)Service Pack 1"" I thought Lync could be installed with a Windows Server 2003 (according to the documentation on technet) and it doesn't require a SP. :s

  Read the article

< Previous Page | 193 194 195 196 197 198 199 200 201 202 203 204  | Next Page >