Search Results

Search found 7827 results on 314 pages for 'counter cache'.

Page 198/314 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• Wireless internet connection connects but internet does not work (no packets received). Wired does.

  - by Rodney

  When I connect my PC via ethernet cable to my ADSL router it works fine. When I connect via Wireless it connects and the internet will work for a random amount of time and then stop working. It stays connected with a strong signal but no packets are received. My laptop/iphone are right next to it and wireless works fine. If I open the Wireless USB status, it says it is connected to my SSID with full strength (54 mps - I am 3 meteres away from my router) and the activty shows as Packets 594 SENT and 105 RECEIVED (this goes up VERY slowly) I have tried the following: Turned off anitvirus and firewall completely. Tested the wifi signal- I am writing this on my laptop which is next to my PC and also has full wifi strength. Tried a different wireless adapter - I dug out an old PCI wireless card - it does the exact same thing. Compared all wireless settings to my laptop. I can ping google.com and it replies (sometimes with packet loss) When I reboot the PC it will connect for a minute or two (random time) and then just stops again. I tried Firefox, IE etc. no joy I have updated all latest versions (Netgear WG111v2) and drivers Checked Event Log - nothing unusual Ping the router (and even connect as admin for the few minutes when the internet does work) Changed the MTU down to 1200 using DrTCP Checked Device Manager for conflicts - none. I ping the router from the PC (192.168.0.10 - 192.168.0.1) and it replies with 4 packets. BUT, on my router admin page (which I access via http on my laptop wirelessly) - if I ping 192.168.0.10 all packets timeout (pinging my laptop 192.168.0.12 works fine) My router admin page shows the leased IP address for 192.168.0.10 (ie it is definitely talking to the router initially) Now I am out of ideas - please help. I think it is an OS/Software issue as I have tried 2 different wireless adapaters (PCI and USB) with the same result but all other wireless devices work fine around mine). It's not the firewall. It is getting assigned an IP address correctly (my PC gets 192.168.0.10, my laptop is .12) It is assigned by DHCP. As soon as I plug in the ethernet cable it all works fine. Repairing the adapter sometimes helps but it will always stop working after a random time. The wireless adapter always shows as connected with Excellent signal but the internet does not work. I am running Windows XP SP3 and have tried a Netgear WG111v2 USB adapter. Thanks in advance! UPDATE: The internet seems to be working, it is just either sending packets too small or slow to work (some small pages load bits of them very slowly but then hang). XP seems to have a networking diagnostic app - here is the output: Last diagnostic run time: 08/30/10 08:16:38 IP Configuration Diagnostic Invalid IP address info Valid IP address detected: 192.168.0.10 IP Layer Diagnostic Corrupted IP routing table info The default route is valid info The loopback route is valid info The local host route is valid info The local subnet route is valid Invalid ARP cache entries action The ARP cache has been flushed Gateway Diagnostic Gateway info The following proxy configuration is being used by IE: Automatically Detect Settings:Disabled Automatic Configuration Script: Proxy Server: Proxy Bypass list: info This computer has the following default gateway entry(ies): 192.168.0.1 info This computer has the following IP address(es): 192.168.0.10 info The default gateway is in the same subnet as this computer info The default gateway entry is a valid unicast address info The default gateway address was resolved via ARP in 1 try(ies) info The default gateway was reached via ICMP Ping in 1 try(ies) info TCP port 80 on host 65.55.12.249 was successfully reached info The Internet host www.microsoft.com was successfully reached info The default gateway is OK DNS Client Diagnostic DNS - Not a home user scenario info Using Web Proxy: no info Resolving name ok for (www.microsoft.com): yes No DNS servers DNS failure HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Passive): Successfully connected to ftp.microsoft.com. info HTTP: Successfully connected to www.microsoft.com. warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out error Could not make an HTTPS connection. info Redirecting user to support call WinSock Diagnostic WinSock status info All base service provider entries are present in the Winsock catalog. info The Winsock Service provider chains are valid. info Provider entry MSAFD Tcpip [TCP/IP] passed the loopback communication test. info Provider entry MSAFD Tcpip [UDP/IP] passed the loopback communication test. info Provider entry RSVP UDP Service Provider passed the loopback communication test. info Provider entry RSVP TCP Service Provider passed the loopback communication test. info Connectivity is valid for all Winsock service providers. Wireless Diagnostic Wireless - Service disabled Wireless - User SSID action User input required: Specify network name or SSID Wireless - First time setup info The Wireless Network name (SSID) to which the user would like to connect = RodSof Wifi. Wireless - Radio off info Valid IP address detected: 192.168.0.10 Wireless - Out of range Wireless - Hardware issue Wireless - Novice user Wireless - Ad-hoc network Wireless - Less preferred Wireless - 802.1x enabled Wireless - Configuration mismatch Wireless - Low SNR Network Adapter Diagnostic Network location detection info Using home Internet connection Network adapter identification info Network connection: Name=Local Area Connection 2, Device=Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC, MediaType=LAN, SubMediaType=LAN info Network connection: Name=Wireless USB, Device=NETGEAR WG111v2 54Mbps Wireless USB 2.0 Adapter, MediaType=LAN, SubMediaType=WIRELESS info Both Ethernet and Wireless connections available, prompting user for selection action User input required: Select network connection info Wireless connection selected Network adapter status info Network connection status: Connected HTTP, HTTPS, FTP Diagnostic HTTP, HTTPS, FTP connectivity info FTP (Active): Successfully connected to ftp.microsoft.com. warn HTTP: Error 12007 connecting to www.microsoft.com: The server name or address could not be resolved warn HTTP: Error 12002 connecting to www.hotmail.com: The operation timed out warn HTTPS: Error 12002 connecting to www.passport.net: The operation timed out warn HTTPS: Error 12002 connecting to www.microsoft.com: The operation timed out error Could not make an HTTP connection. error Could not make an HTTPS connection.

  Read the article

• Which is faster for read access on EC2; local drive or EBS?

  - by Phillip Oldham

  Which is faster for read access on an EC2 instance; the "local" drive or an attached EBS volume? I have some data that needs to be persisted so have placed this on an EBS volume. I'm using OpenSolaris, so this volume has been attached as a ZFS pool. However, I have a large chunk of EC2 disk space that's going to go unused, so I'm considering re-purposing this as a ZFS cache volume but I don't want to do this if the disk access is going to be slower than that of the EBS volume as it would potentially have a detrimental effect.

  Read the article

• Passing Variables between views / view controllers

  - by Dan

  Hi I'm new to ObjectiveC / IPhoneSDK and I'm informally trying to study it on my own. What I'm basically trying to do is from one view there are 12 zodiac signs. When a user clicks one, it proceeds to the second view (with animation) and loads the name of the zodiac sign it clicked in a UILabel, that's it. Here are my codes: Lovescopes = 1st page Horoscopes = 2nd page Lovescopes4AppDelegate.h #import <UIKit/UIKit.h> #import "HoroscopesViewController.h" #import "Lovescopes4AppDelegate.h" @class Lovescopes4ViewController; @interface Lovescopes4AppDelegate : NSObject <UIApplicationDelegate> { UIWindow *window; Lovescopes4ViewController *viewController; HoroscopesViewController *horoscopesViewController; } -(void)loadHoroscope; -(void)loadMainPage; @property (nonatomic, retain) IBOutlet UIWindow *window; @property (nonatomic, retain) IBOutlet Lovescopes4ViewController *viewController; @property (nonatomic, retain) HoroscopesViewController *horoscopesViewController; @end Lovescopes4AppDelegate.m #import "Lovescopes4AppDelegate.h" #import "Lovescopes4ViewController.h" @implementation Lovescopes4AppDelegate @synthesize window; @synthesize viewController; @synthesize horoscopesViewController; -(void)loadHoroscope { HoroscopesViewController *aHoroscopeViewController = [[HoroscopesViewController alloc] initWithNibName:@"HoroscopesViewController" bundle:nil]; [self setHoroscopesViewController:aHoroscopeViewController]; [aHoroscopeViewController release]; [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.5]; [UIView setAnimationTransition:UIViewAnimationTransitionFlipFromLeft forView:window cache:YES]; [viewController.view removeFromSuperview]; [self.window addSubview:[horoscopesViewController view]]; [UIView commitAnimations]; } -(void)loadMainPage { [UIView beginAnimations:nil context:NULL]; [UIView setAnimationDuration:0.5]; [UIView setAnimationTransition:UIViewAnimationTransitionFlipFromRight forView:window cache:NO]; [horoscopesViewController.view removeFromSuperview]; [self.window addSubview:[viewController view]]; [UIView commitAnimations]; [horoscopesViewController release]; horoscopesViewController = nil; } - (void)applicationDidFinishLaunching:(UIApplication *)application { // Override point for customization after app launch [window addSubview:viewController.view]; [window makeKeyAndVisible]; } - (void)dealloc { [viewController release]; [window release]; [super dealloc]; } @end Lovescopes4ViewController.h #import <UIKit/UIKit.h> #import "HoroscopesViewController.h" @interface Lovescopes4ViewController : UIViewController { HoroscopesViewController *hvc; } -(IBAction)loadAries; @property (nonatomic, retain) HoroscopesViewController *hvc; @end Lovescope4ViewController.m #import "Lovescopes4ViewController.h" #import "Lovescopes4AppDelegate.h" @implementation Lovescopes4ViewController @synthesize hvc; -(IBAction)loadAries { NSString *selected =@"Aries"; [hvc loadZodiac:selected]; Lovescopes4AppDelegate *mainDelegate = (Lovescopes4AppDelegate *) [[UIApplication sharedApplication] delegate]; [mainDelegate loadHoroscope]; } HoroscopesViewController.h #import <UIKit/UIKit.h> @interface HoroscopesViewController : UIViewController { IBOutlet UILabel *zodiacLabel; } -(void)loadZodiac:(id)zodiacSign; -(IBAction)back; @property (nonatomic, retain) IBOutlet UILabel *zodiacLabel; @end HoroscopesViewController.m #import "HoroscopesViewController.h" #import "Lovescopes4AppDelegate.h" @implementation HoroscopesViewController @synthesize zodiacLabel; /* // The designated initializer. Override if you create the controller programmatically and want to perform customization that is not appropriate for viewDidLoad. - (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil { if (self = [super initWithNibName:nibNameOrNil bundle:nibBundleOrNil]) { // Custom initialization } return self; } */ /* // Implement viewDidLoad to do additional setup after loading the view, typically from a nib. - (void)viewDidLoad { [super viewDidLoad]; } */ /* // Override to allow orientations other than the default portrait orientation. - (BOOL)shouldAutorotateToInterfaceOrientation:(UIInterfaceOrientation)interfaceOrientation { // Return YES for supported orientations return (interfaceOrientation == UIInterfaceOrientationPortrait); } */ -(void)loadZodiac:(id)zodiacSign { zodiacLabel.text = [NSString stringWithFormat: @"%@", zodiacSign]; } -(IBAction)back { Lovescopes4AppDelegate *mainDelegate = (Lovescopes4AppDelegate *) [[UIApplication sharedApplication] delegate]; [mainDelegate loadMainPage]; }

  Read the article

• How do I tar dot files but not dot directories

  - by bjackfly

  The following tar command will exclude all dot files and dot directories. tar -cvzf /media/bjackfly/bkup/bkup.gz --exclude '.*' --one-file-system /home/bjackfly In my case I want the dot files to be backed up in the home directory (.vimrc, .bashrc) etc. but not the dot directories /.config /.cache /.eclipse etc. Any Linux gurus with a command for this, or do I need to run a find into a tar or do two different tar commands which is non-ideal? One for dot files in the home directory and one for everything else?

  Read the article

• What happens when Oracle's Enterprise Single-Sign-On database goes down? [migrated]

  - by Unai

  We're working on setting up Oracle's Enterprise Single-Sign-On with High Availability. At the moment every component provides HA except our database backend (i.e. we have just one instance). While conducting some kick-the-plug tests we learnt that the ESSO system works even with the database turned OFF. This was a nice surprise but now we need to understand what are the implications of a database failure; sure the sessions might be handled on the application servers and the policies might have been cached but... for how long? how big is this cache? what is the role of the database? I would appreciate if anyone shares her/his experience and/or points out to documentation that covers this. Thank you so much.

  Read the article

• Problem with the hosts file in Windows XP

  - by Mee

  I have a computer with Windows XP SP2 with a weird problem. The hosts file doesn't work. No matter what I do, adding or removing entries in the file doesn't make any difference, pinging the added names times out. I tried flushing the DNS cache (using ipconfig /flushdns) but that didn't work, I even tried to restart the DNS client service but that made no difference too. Removing entries also has no effect, I ping the names and I get a reply. Help!!! Edit: Thanks for your answer guys, but the problem is more complicated than this. It seems I'll have to reinstall Windows.

  Read the article

• KVM Guest installed from console. But how to get to the guest's console?

  - by badbishop

  I'm trying to install a fully virtualized guest (Fedora 14 x86_64) on KVM (RHEL 6), using command-line only (both hypervisor and guest). It goes without errors, and without a tangible result . I'd like to know how to do a text-only installation. So, here's what I've done: # virt-install \ --name=FE --ram=756 --vcpus=1 \ --file=/var/lib/libvirt/images/FE.img --network bridge:br0 \ --nographics --os-type=linux \ --extra-args='console=tty0' -v \ --cdrom=/media/usb/Fedora-14-x86_64-Live-Desktop.iso Starting install... Creating domain... | 0 B 00:00 Connected to domain FE Escape character is ^] ÿ Now what? As I understand after googling for a couple of days, I should see the guest's output from the text installation, but nothing happens. virt-viewer cannot connect to it, kindly suggesting that I explore all the options by adding --help (which I did). If I reconnect with virsh, I see this: Domain installation still in progress. You can reconnect to the console to complete the installation process. [root@v ~] # virsh console FEConnected to domain FE Escape character is ^] This shows that VM is running # virsh list Id Name State ---------------------------------- 8 FE running Qemu log: LC_ALL=C PATH=/sbin:/usr/sbin:/bin:/usr/bin /usr/libexec/qemu-kvm -S -M rhel6.0.0 -enable-kvm -m 756 -smp 1,sockets=1,cores=1,threads=1 -name FE -uuid 6989d008-7c89-424c-d2d3-f41235c57a18 -nographic -nodefconfig -nodefaults -chardev socket,id=monitor,path=/var/lib/libvirt/qemu/FE.monitor,server,nowait -mon chardev=monitor,mode=control -rtc base=utc -no-reboot -boot d -drive file=/var/lib/libvirt/images/FE.img,if=none,id=drive-ide0-0-0,format=raw,cache=none -device ide-drive,bus=ide.0,unit=0,drive=drive-ide0-0-0,id=ide0-0-0 -drive file=/media/usb/Fedora-14-x86_64-Live-Desktop.iso,if=none,media=cdrom,id=drive-ide0-1-0,readonly=on,format=raw -device ide-drive,bus=ide.1,unit=0,drive=drive-ide0-1-0,id=ide0-1-0 -netdev tap,fd=20,id=hostnet0 -device rtl8139,netdev=hostnet0,id=net0,mac=52:54:00:0a:65:8d,bus=pci.0,addr=0x2 -chardev pty,id=serial0 -device isa-serial,chardev=serial0 -usb -device virtio-balloon-pci,id=balloon0,bus=pci.0,addr=0x3 char device redirected to /dev/pts/1 Output of /etc/libvirt/qemu/FE.xml # cat /etc/libvirt/qemu/FE.xml <domain type='kvm'> <name>FE</name> <uuid>6989d008-7c89-424c-d2d3-f41235c57a18</uuid> <memory>774144</memory> <currentMemory>774144</currentMemory> <vcpu>1</vcpu> <os> <type arch='x86_64' machine='rhel6.0.0'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/libexec/qemu-kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw' cache='none'/> <source file='/var/lib/libvirt/images/FE.img'/> <target dev='hda' bus='ide'/> <address type='drive' controller='0' bus='0' unit='0'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> <address type='drive' controller='0' bus='1' unit='0'/> </disk> <controller type='ide' index='0'> <address type='pci' domain='0x0000' bus='0x00' slot='0x01' function='0x1'/> </controller> <interface type='bridge'> <mac address='52:54:00:0a:65:8d'/> <source bridge='br0'/> <address type='pci' domain='0x0000' bus='0x00' slot='0x02' function='0x0'/> </interface> <serial type='pty'> <target port='0'/> </serial> <console type='pty'> <target port='0'/> </console> <memballoon model='virtio'> <address type='pci' domain='0x0000' bus='0x00' slot='0x03' function='0x0'/> </memballoon> </devices> </domain> I'm obviously missing something that many others don't, but what is it? Thanx in advance!

  Read the article

• Is it possible to install Windows 8 on the SanDisk ReadyCache 32GB SSD drive?

  - by halil ibrahim

  I bought the SanDisk ReadyCache 32GB SSD drive this week. I didn't know about the caching stuff and thought that I would be able to install Windows 8 on it. Now I'm using it as a cache drive with the ExpressCache software. But I wonder if it is possible to use this SSD as a primary system drive with an operating system installed on it. I've tried to format the disk via Windows Disc Manager Tool, but the format option is disabled. Only delete and information options are allowed. Can you help me with this?

  Read the article

• AD User Passwords expiring without any notifications?

  - by scooter133

  We setup password Policies in Active Directory to Expire peoples passwords after so many days. Well it looks like the time has come for the Expiration of the Passwords and people are getting locked out... There has been no warning of user passwords about to expire. They just come in to work and they cannot log in, the phones no longer connect, nothing. Reset the password and all is good. Some of the users are locked out, though most are not, they just cannot log in. On setting the password Expiration, I didn't see anything about nor warning the users of the impending expiration. Seems like it used to warn you 15 days or so before it would expire. Clients range from: WinXP, WinVista, Win7 and Server 2008R2 Remote Desktop Services. How can I make sure my users are warned of the Expiration? Resultant Set of Policy for User that was not prompted: Account Policies/Password Policy Policy Setting Winning GPO Enforce password history 10 passwords remembered Default Domain Policy Maximum password age 270 days Default Domain Policy Minimum password age 0 days Default Domain Policy Minimum password length 4 characters Default Domain Policy Password must meet complexity requirements Disabled Default Domain Policy Store passwords using reversible encryption Disabled Default Domain Policy Account Policies/Account Lockout Policy Policy Setting Winning GPO Account lockout duration 20 minutes Default Domain Policy Account lockout threshold 5 invalid logon attempts Default Domain Policy Reset account lockout counter after 15 minutes Default Domain Policy Local Policies/Audit Policy Policy Setting Winning GPO Audit account logon events Failure Default Domain Policy Audit account management Success, Failure Default Domain Policy Audit directory service access Success, Failure Default Domain Policy Audit logon events Failure Default Domain Policy Audit policy change Success, Failure Default Domain Policy Audit privilege use Failure Default Domain Policy Local Policies/Security Options Interactive Logon Policy Setting Winning GPO Interactive logon: Prompt user to change password before expiration 7 days Default Domain Policy

  Read the article

• Ecommerce Database DNS Switch

  - by KThompson

  Hello, I am moving an e-commerce site to a new server. All has been successful and its time to change the DNS for the domain. It's a relatively popular site and I fear that during propagation orders will be split between the old database and the new one. The databases do contain content that is dependent of the server it is on (Cache path, upload directory, etc.) so I can't just point the old site to the new database. Are there any solutions to this without any of the sites going down. Thanks in advance

  Read the article

• How can I permanently remove default root hints from a Server 2008 DNS server?

  - by TonyD

  My network exists in private address space and I am unable to perform DNS lookups against DNS servers on the internet directly (blocked by firewall). There are other networks that exist in the same private address space as my network. I need to be able to perform DNS lookups for devices in these networks as well. There are 2 main internal DNS servers in this private address space, but not on my netowrk. I can perform DNS lookups against both of these servers for devices internal to our address space and names on the internet. I would like to permanently remove the root hints from our Server 2008 R2 DNS server and replace them with these 2 internal DNS servers. I have removed them from the dnsmgmt console, the C:\Windows\System32\DNS\cache.dns file, and from the RootDNSServers folder under the System folder in ADUC. Even so, they continue to repopulate into the root hints tab in the server properties for DNS after roughly an hour. Does anyone know how to permanently remove these entries?

  Read the article

• Send additional records in DNS response

  - by Joel

  Is is possible to send one or more additional records with a DNS response? For example, can a request for the A record of www.example.com result in a response containing the A record for www.example.com as well as the A record for www2.example.com? Is this compliant with the standard? Will it even help? ie. Will the typical client cache the additional record so that when it needs it in the near future, it won't result in another round-trip to the DNS server?

  Read the article

• ntop to analyse bandwidth usage on multiple ASA 5505

  - by dunxd

  I have set up a netflow server at our data centre, which is connected via VPN to ~40 remote offices using Cisco ASA 5505. The aim is to analyse usage data and find out exactly how the remote connections are being used. I followed through http://techowto.files.wordpress.com/2008/09/ntop-guide.pdf to set up ntop and https://supportforums.cisco.com/docs/DOC-6114 to set up the ASAs. I can see from the Plugin Netflow Statistics page that netflow packets from my ASAs are being received - the counter is increasing. However, I am not seeing any breakdown on the Global Traffic Statistic page after switching to the Netflow interface. I'm just seeing a pie chart showing 100% traffic for eth0. The interfaces and documentation are a little hard to follow so I am not sure I have got things configured correctly. When setting up my NetFlow-device.2 I can specify Virtual NetFlow Interface Network Address - the web UI says This value is in the form of a network address and mask on the network where the actual NetFlow probe is located. is this a Network address (e.g. 192.168.0.0/24) or an actual host IP address (192.167.0.1/24)? If that should be a network address, is this the network in which one of my ASAs is or the network in which my ntop server is? If a host IP address, is this the IP address used by eth0 on my ntop server, the IP address of an ASA, or something else? Do I need a separate virtual interface for each ASA I am collecting netflow data from? Any guidance would be greatly welcome.

  Read the article

• How can I configure Firefox to assume I have less memory?

  - by WoLpH

  Firefox has a few different settings that automatically get tuned based on the system ram. This is all great if you're running nothing besides Firefox, but when you're running half a dozen apps at the same time and they all assume that they can take a decent chunk of mem it just kills the box. Example settings: http://kb.mozillazine.org/Browser.sessionhistory.max_total_viewers http://kb.mozillazine.org/Browser.cache.memory.capacity How can I make Firefox automatically configure all these settings with the assumption that I only have 512MB of memory instead of 4GB (or whatever number, but you get the idea). I am running Ubuntu 12.04 with Firefox 14 Current workarounds: Running a Windows XP virtual machine with 512MB of ram. It actually runs smooth and takes less memory (including Windows) to run than having Firefox (or Chrome for that matter) run standalone. Install the 32 bit version of Firefox By installing the 32 bit version of firefox (apt-get install firefox:i386) the base memory usage is only about 50% of what it is with the 64 bit.

  Read the article

• Is there a way of disabled byte-range requests in Apache?

  - by Sam Minnée

  I have a web page with a link to a PDF file (target="_blank"). If I click the link, the PDF reader just shows a grey screen within the Firefox browser. If I copy that link and manually open it in a new tab, the PDF will display correctly, and subsequent requests made by clicking the original link now work, suggesting that the problem occurs when loading the file into the cache. It appears as though the Adobe PDF reader plugin is making byte-range requests (I see lots of 206 responses) and I suspect that this may be the cause of the issue. I am running an Apache webserver. Has anyone had problems with Apache and Adobe's byte-range requests? Are there any workarounds? Perhaps a way of configuring Apache to ignore byte-range requests on PDFs?

  Read the article

• Overcrowded Windows XP Folders

  - by BlairHippo

  I know that, technically, an individual Windows XP directory can hold an immense number of files (over 4.29 billion, according to a quick Google search). However, is there a practical ceiling where too many files in one directory starts having an impact on reads to those files? If so, what factors would exacerbate or help the issue? I ask because my employer has several hundred XP machines in the field at client sites, and the performance on some of the older ones is getting "sludgy." The machines download and display client-defined images, and my supervisor and I suspect that our slacktastic approach to cache management could be to blame. (Some of the directories have tens of thousands of images in them.) I'm trying to gather evidence to support or contest the theory before spending time on a coding fix.

  Read the article

• Can't access some websites with any browser

  - by Charles Kingsmill

  I'm running Windows 7 64-bit on a new Samsung laptop and accessing the internet okay via ethernet cable to my university's ISP. Some sites work fine (e.g. google.com) but I can't access others at all (microsoft.com, topshop.com). I can't connect to those sites in safe mode with networking. And ping and tracert both fail. There's no proxy. Other users can connect successfully to these sites using my cable and socket. I've tried all the following with no success: using various browsers (IE9, FF, Chrome) creating a new user updating drivers clearing the DNS cache using OpenDNS and Google's DNS turning off Avast tweaking the MTU running MS malicious software removal tool running Spybot S&D reviewing the hosts file disabling the IPv6 options repairing / resetting winsock settings disabling advanced javascript options I have run out of ideas... can anyone see anything I've missed??!

  Read the article

• RAID5 on SmartArray P410i online resize

  - by datacompboy

  I have P410i+256M Cache without battery backup. My RAID5 was build over 3*136GB disks, now all disks were replaced to a 3*300GB array. How can I extend it to use the whole space? HPacucli doesn't allows that, I think this might be because no battery is present. I have a redundant power supply. All data is mirrored over DRBD to a secondary server, so I can try to resize with a chance of loss of data in case of power failure, but I prefer to have an online resize.

  Read the article

• Is there a way to avoid Wacom Control Panel to stop showing in certain cases ?

  - by S.gfx

  This is the problem: Suddenly, you double click on desktop wacom tablet settings icon, and it wont show the dialog. It appears to be loaded as it's shown down in the windows taskbar. I suspect is caused by change of resolution or some setting, maybe suddenly it sets the origin of the panel dialog at some 3000 thosand pixels to the right or something. I have digged that wacom_tablet.dat file to see if I fix it changing some value there, but looks like a log, a history, more than a ini for settings... And anyway does not solve it. My solution is having always a very complete settings file done and backed up to restore (with wacom utility for this, which in previous driver versions did not exist) when this happens, but is counter productive: You change the settings even per each project(and software) needs. I have seen it happenning with Cintiq 12", intuos4 A6, Graphires, Intuos 1. Is just me, doing something weird every time? I doubt it, is normal use, I am amazed that seems no one else had this prob(or nobody asked), happens often with typical use. Maybe is because am setting a shortcut in the desktop? Weird as it works perfect till some random moment... (Have digged Wacom's forums and FAQs, then here, but nothing related to it... Neither in "related questions".) The thing happens in Win XP, 7, etc. Done so during years in my experience, and several times at work, which is worse.

  Read the article

• Java 6.0 Virtual Machine re-caches application on every load

  - by David Neale

  I have a Java application which is loaded and cached by the JRE and for most users it only needs to cache once unless the application software has changed. However, I have one computer that caches the entire application every time they load it. It is not the version of the JRE, I have that running on other machines. It also works on this machine if logged in as a local admin, just not as a standard user. Does anybody have any ideas on what might be causing this?

  Read the article

• Regarding compatibility of Intel Pentium D 805 CPU with new motherboard

  - by aniruddhabhide

  I currently have an old configuration with Intel Pentium D 805 CPU and Intel D101GGC chipset. Now I am planning to upgrade my system except CPU and hard disk since it doesn't fit in the budget. QUESTION: I am planning to get Gigabyte GA-B75M-D3H Motherboard which has LGA1155 socket. But my processor has PLGA775 socket type. Will my CPU fit in thee new motherboard's socket? LINKS: CPU specs (Intel site): http://ark.intel.com/products/27511/Intel-Pentium-D-Processor-805-2M-Cache-2_66-GHz-533-MHz-FSB New Motherboard specs (Vendor site): http://www.flipkart.com/gigabyte-ga-b75m-d3h-motherboard/p/itmdacp36gegyeqt?pid=MBDDACP2GUBGFPFM

  Read the article

• Bind: dns not 'spreaded'

  - by realtebo

  I've elfoip.net with bind $ whois elfoip.net | grep 'Name Server' Name Server: NS.ELFOIP.NET I need elfoip.net be able to serve third levels domain, like mickymouse.elfoip.net, etc... Yes, I'm trying to create an other useless dyndns clone. i've added some third level as A RR. Eg: executing this from the server itself $ dig @localhost mattinauno.elfoip.net ;; ANSWER SECTION: mattinauno.elfoip.net. 60 IN A 192.81.221.113 I was expecting in one or two days, from my pc i can digit in browser mattinauno.elfoip.net and get page a 192.81.221.113 But this is not happening. Are there any prerequisites to satisfy to allow dns of my isp to be able to forward dns resolution of *.elfoip.net to MY dns ? (Or to ask to him and then cache ?) TTL of zone is set a 5m I've not AllowQuey directive, is it necessary for other dns to cache from mine ? I've cheched the zone with bind utility named-checkzone but no error detected. How to diagnose why other dns doesn't take in account RR from mine ? from my home pc dig @ns.elfoip.net mattinauno.elfoip.net ;; ANSWER SECTION: mattinauno.elfoip.net. 60 IN A 192.81.221.113 ;; AUTHORITY SECTION: elfoip.net. 300 IN NS ns.elfoip.net. but dig @8.8.8.8 mattinauno.elfoip.net give no answers Whole zone file: note I've used nsupdate, so this file has been re-edited and re-formatted from this utility ! root@mirko:/var/named# cat elfoip.net.db $ORIGIN . $TTL 300 ; 5 minutes elfoip.net IN SOA ns.elfoip.net. hostmaster.elfoip.net. ( 2013062314 ; serial 3600 ; refresh (1 hour) 600 ; retry (10 minutes) 86400 ; expire (1 day) 60 ; minimum (1 minute) ) NS ns.elfoip.net. A 109.168.99.6 $ORIGIN elfoip.net. $TTL 60 ; 1 minute google A 173.194.35.56 maiscai A 192.81.221.113 mattinadue A 192.81.221.113 mattinauno A 192.81.221.113 $TTL 300 ; 5 minutes ns A 109.168.99.6 $TTL 60 ; 1 minute prova A 208.67.222.222 prova2 A 13.23.34.45 A 13.23.34.46 www CNAME elfoip.net. EDIT: added named.conf.local zone "elfoip.net" { type master; // file "/etc/bind/elfoip.net.db"; file "/var/named/elfoip.net.db"; allow-update { key elfoip.net ; }; }; EDIT: I've no setup list-on directive *EDIT Added a TCPDUMP after [email protected] wwww.elfoip.net from a machine which uses my company internal dns, who allow recursive query. root@mirko:~# tcpdump -i eth0 'port 53' tcpdump: verbose output suppressed, use -v or -vv for full protocol decode listening on eth0, link-type EN10MB (Ethernet), capture size 65535 bytes 11:57:23.293611 IP host9-210-static.22-87-b.business.telecomitalia.it.45958 > mirko.elfoip.net.domain: 61337+ A? www.elfoip.net. (32) 11:57:23.294114 IP mirko.elfoip.net.domain > host9-210-static.22-87-b.business.telecomitalia.it.45958: 61337* 2/1/1 CNAME elfoip.net., A 109.168.99.6 (95) 11:57:23.294554 IP mirko.elfoip.net.59571 > google-public-dns-a.google.com.domain: 45851+ PTR? 9.210.22.87.in-addr.arpa. (42) 11:57:23.330444 IP google-public-dns-a.google.com.domain > mirko.elfoip.net.59571: 45851 1/0/0 PTR host9-210-static.22-87-b.business.telecomitalia.it. (106) 11:57:23.331181 IP mirko.elfoip.net.44171 > google-public-dns-a.google.com.domain: 33339+ PTR? 8.8.8.8.in-addr.arpa. (38) 11:57:23.439405 IP google-public-dns-a.google.com.domain > mirko.elfoip.net.44171: 33339 1/0/0 PTR google-public-dns-a.google.com. (82) 11:57:31.350654 IP host9-210-static.22-87-b.business.telecomitalia.it.30108 > mirko.elfoip.net.domain: 38269 [1au] A? ns.elfoip.net. (42) 11:57:31.351117 IP mirko.elfoip.net.domain > host9-210-static.22-87-b.business.telecomitalia.it.30108: 38269* 1/1/1 A 109.168.99.6 (72) If i dig @8.8.8.8 www.elfoip.net, NOTHING happens in dump log !

  Read the article

• Why am I unable to turn off recursion in ISC BIND?

  - by nbolton

  Here's my named.conf.options file: options { directory "/var/cache/bind"; dnssec-enable yes; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; # disable recursion recursion no; }; I've tried adding allow-recursion { "none"; } before recursion but this also has no effect; I'm testing it by using nslookup on Windows, and using google.com. as the query (and it returns an IP, so I assume recursion is on). This issue occurs on two servers with similar setups.

  Read the article

• Disable thumbnails in Windows XP?

  - by quack quixote

  I regularly use Windows Explorer to browse my drives and data, and I notice little freezes and hiccups at times. It's especially noticable when browsing local or network folders with lots of video files (AVI, MKV, MPG, etc). I almost always browse in Details view, and the "Do not cache thumbnails" option is turned on. Even though I'm in "Details" mode, I'm convinced the sluggishness is due to Windows trying to generate thumbnails for the video files, so I want to disable thumbnail generation for these files. I occasionally use Thumbnails view for browsing image files, so I don't want to disable all thumbnails. But for future reference, this might be good to know. So I have three questions about disabling Windows thumbnail generation: How do I disable thumbnail generation for all non-image files? How do I disable thumbnail generation for all files? How do I disable thumbnail generation for one specific filetype? And finally, how do I undo (re-enable thumbnails) once I've performed one of the above?

  Read the article

• Processing incorrect mac addresses from 802.11 frames with pcap

  - by Quentin Swain

  I'm working throurgh a project with pcap and wireless. Following an example posted in response to oe of my earlier questions I am trying to extract the mac addresses from wireless frames. I have created structures for the radiotap header and a basic management frame. For some reason when it comes to trying to output the mac addresses I am printing out the wrong data. When I compare to wireshark I don't see why the radio tap data is printing out correctly but the mac addresses are not. I don't see any additional padding in the hex dump that wireshark displays when i look at the packets and compare the packets that I have captured. I am somewhat famialar with c but not an expert so maybe I am not using the pointers and structures properly could someone help show me what I am doing wrong? Thanks, Quentin // main.c // MacSniffer // #include <pcap.h> #include <string.h> #include <stdlib.h> #define MAXBYTES2CAPTURE 65535 #ifdef WORDS_BIGENDIAN typedef struct frame_control { unsigned int subtype:4; /*frame subtype field*/ unsigned int protoVer:2; /*frame type field*/ unsigned int version:2; /*protocol version*/ unsigned int order:1; unsigned int protected:1; unsigned int moreDate:1; unsigned int power_management:1; unsigned int retry:1; unsigned int moreFrag:1; unsigned int fromDS:1; unsigned int toDS:1; }frame_control; struct ieee80211_radiotap_header{ u_int8_t it_version; u_int8_t it_pad; u_int16_t it_len; u_int32_t it_present; u_int64_t MAC_timestamp; u_int8_t flags; u_int8_t dataRate; u_int16_t channelfrequency; u_int16_t channFreq_pad; u_int16_t channelType; u_int16_t channType_pad; u_int8_t ssiSignal; u_int8_t ssiNoise; u_int8_t antenna; }; #else typedef struct frame_control { unsigned int protoVer:2; /* protocol version*/ unsigned int type:2; /*frame type field (Management,Control,Data)*/ unsigned int subtype:4; /* frame subtype*/ unsigned int toDS:1; /* frame coming from Distribution system */ unsigned int fromDS:1; /*frame coming from Distribution system */ unsigned int moreFrag:1; /* More fragments?*/ unsigned int retry:1; /*was this frame retransmitted*/ unsigned int powMgt:1; /*Power Management*/ unsigned int moreDate:1; /*More Date*/ unsigned int protectedData:1; /*Protected Data*/ unsigned int order:1; /*Order*/ }frame_control; struct ieee80211_radiotap_header{ u_int8_t it_version; u_int8_t it_pad; u_int16_t it_len; u_int32_t it_present; u_int64_t MAC_timestamp; u_int8_t flags; u_int8_t dataRate; u_int16_t channelfrequency; u_int16_t channelType; int ssiSignal:8; int ssiNoise:8; }; #endif struct wi_frame { u_int16_t fc; u_int16_t wi_duration; u_int8_t wi_add1[6]; u_int8_t wi_add2[6]; u_int8_t wi_add3[6]; u_int16_t wi_sequenceControl; // u_int8_t wi_add4[6]; //unsigned int qosControl:2; //unsigned int frameBody[23124]; }; void processPacket(u_char *arg, const struct pcap_pkthdr* pkthdr, const u_char* packet) { int i= 0, *counter = (int *) arg; struct ieee80211_radiotap_header *rh =(struct ieee80211_radiotap_header *)packet; struct wi_frame *fr= (struct wi_frame *)(packet + rh->it_len); u_char *ptr; //printf("Frame Type: %d",fr->wi_fC->type); printf("Packet count: %d\n", ++(*counter)); printf("Received Packet Size: %d\n", pkthdr->len); if(rh->it_version != NULL) { printf("Radiotap Version: %d\n",rh->it_version); } if(rh->it_pad!=NULL) { printf("Radiotap Pad: %d\n",rh->it_pad); } if(rh->it_len != NULL) { printf("Radiotap Length: %d\n",rh->it_len); } if(rh->it_present != NULL) { printf("Radiotap Present: %c\n",rh->it_present); } if(rh->MAC_timestamp != NULL) { printf("Radiotap Timestamp: %u\n",rh->MAC_timestamp); } if(rh->dataRate != NULL) { printf("Radiotap Data Rate: %u\n",rh->dataRate); } if(rh->channelfrequency != NULL) { printf("Radiotap Channel Freq: %u\n",rh->channelfrequency); } if(rh->channelType != NULL) { printf("Radiotap Channel Type: %06x\n",rh->channelType); } if(rh->ssiSignal != NULL) { printf("Radiotap SSI signal: %d\n",rh->ssiSignal); } if(rh->ssiNoise != NULL) { printf("Radiotap SSI Noise: %d\n",rh->ssiNoise); } ptr = fr->wi_add1; int k= 6; printf("Destination Address:"); do{ printf("%s%X",(k==6)?" ":":",*ptr++); } while(--k>0); printf("\n"); ptr = fr->wi_add2; k=0; printf("Source Address:"); do{ printf("%s%X",(k==6)?" ":":",*ptr++); }while(--k>0); printf("\n"); ptr = fr->wi_add3; k=0; do{ printf("%s%X",(k==6)?" ":":",*ptr++); } while(--k>0); printf("\n"); /* for(int j = 0; j < 23124;j++) { if(fr->frameBody[j]!= NULL) { printf("%x",fr->frameBody[j]); } } */ for (i = 0;i<pkthdr->len;i++) { if(isprint(packet[i +rh->it_len])) { printf("%c",packet[i + rh->it_len]); } else{printf(".");} //print newline after each section of the packet if((i%16 ==0 && i!=0) ||(i==pkthdr->len-1)) { printf("\n"); } } return; } int main(int argc, char** argv) { int count = 0; pcap_t* descr = NULL; char errbuf[PCAP_ERRBUF_SIZE], *device = NULL; struct bpf_program fp; char filter[]="wlan broadcast"; const u_char* packet; memset(errbuf,0,PCAP_ERRBUF_SIZE); device = argv[1]; if(device == NULL) { fprintf(stdout,"Supply a device name "); } descr = pcap_create(device,errbuf); pcap_set_rfmon(descr,1); pcap_set_promisc(descr,1); pcap_set_snaplen(descr,30); pcap_set_timeout(descr,10000); pcap_activate(descr); int dl =pcap_datalink(descr); printf("The Data Link type is %s",pcap_datalink_val_to_name(dl)); //pcap_dispatch(descr,MAXBYTES2CAPTURE,1,512,errbuf); //Open device in promiscuous mode //descr = pcap_open_live(device,MAXBYTES2CAPTURE,1,512,errbuf); /* if(pcap_compile(descr,&fp,filter,0,PCAP_NETMASK_UNKNOWN)==-1) { fprintf(stderr,"Error compiling filter\n"); exit(1); } if(pcap_setfilter(descr,&fp)==-1) { fprintf(stderr,"Error setting filter\n"); exit(1); } */ pcap_loop(descr,0, processPacket, (u_char *) &count); return 0; }

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >