Search Results

Search found 9235 results on 370 pages for 'social networking'.

Page 198/370 | < Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >

• Could 0x800CCC0E in Outlook be caused by bad wireless connection?

  - by AndrejaKo

  I have a computer connected to a WiFi access point/router/modem. Sometimes, I get page not found errors and similar when opening a browser window, sometimes pings fail and it looks like the router's signal isn't very good. On the other hand, I get around 4 bars of signal strength in windows and graph looks good in Inssider. I also never get dropped connection to the router. My main problem is that I often get errors (such as 0x800CCC0E) in Outlook 2010 that after some searching appear to be connected to bad server connection. I'm using GMail over IMAP and all settings are correct. I didn't have similar errors on my previous router, but I'm not 100% sure that they appeared after switching to current one. It may have worked for some time without errors. There are also around 3000 messages on the server and the size of mailbox is around 12 GiB, which may contribute to the problems. On the other hand, there are at least 24 other networks in the 2.4 GHz range which I'm using and the number may have increased since I switched routers. Should I try solving this by getting a router with stronger signal?

  Read the article

• Windows 7/8 can't connect to an N Router

  - by xenoterracide

  I have a router running OpenWRT backfire, with N and A/B/G being broadcast. A linux laptop, and a Mac laptop can see the N network and connect to it (or at least they could last weekend). But there is now a Windows 7 Desktop with a B/G/N wireless card, and a Windows 8 Laptop with a B/G/N wireless card that can't see the N network only the B/G broadcast. The B/G and N have different SSID's and Encryption ( WEP and WPA2 PSK respectively ). The N SSID isn't even visible. Does anyone have any suggestions as to how to troubleshoot further? Or what might be the cause? update wireless info Desktop Dell Wireless 1502 802.11b/g/n Atheros Communications Inc 9.2.0.412

  Read the article

• Cross subnet connection [closed]

  - by user30472

  My internal Windows 2008 AD network is 172.20.xxx.xxx My Apple Wireless base stations only allows DHCP 172.16.xxx.xxx Private IP address ranges: 10.0.0.0 to 10.255.255.255 172.16.0.0 to 172.31.255.255 192.168.0.0 to 192.168.255.255 The problem: The internet works from my IPad that has a 172.16.xxx.xxx address, but I can't access (browse) my tools server that is 172.20.xxx.xxx that host my Filemaker database. Is it possible to add 172.16.xxx.xxx range somewhere in DHCP or DNS on my Windows domain server so I can access tools? Or is there another way to make this connection work? Thanks

  Read the article

• Internet really slow or stops working on my computer but fine on my laptop and ipad

  - by Fr0zen1

  I know you are going to say that this has been answered already, but it hasnt. None of those solutions worked for me. So this is the problem, and it only occurs on my computer, my laptop,ipad and iphone are just fine. When I`m browsing the net, it laods webpages slow(my speed is 30mb down and 3mb up) and when I start downloading with a another application(steam, utorrent), my browser completely stops working, but the application thats downloading(steam, utorrent) continues to download with a fast spead(2-3mb/s) and I do not know why. I have this issue on all browsers. I have tried chrome, internet explorer and firefox. I have restored my windows but still the same issue and I also have kubuntu installed and it also has the same issue. I do not know why. Any help? Thank you

  Read the article

• Ubuntu Server static IP

  - by FoxyShadoww

  I am trying to give my server a static ip address. This seems to work without any problems, but I can't seem to get an internet connection after this process. I've also changed my dns server to 8.8.8.8 (google dns right?). OS: Ubuntu Server 12.04 x86 Environment: Virtualbox File: /etc/network/interfaces: auto eth0 iface eth0 inet static address 192.168.2.10 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1

  Read the article

• Routing DHCP traffic over the internet

  - by rmanna

  i'd like to know if it's possible for the internet to be between a DHCP server and the network it's "assigned" to? so basically, something like this: -------------- ------------- ------------- | DHCP Server | | DHCP | | Clients | | |-----Internet-----| Relay Agent |------| 192.168.0.* | | | | 192.168.0.1 | | | -------------- ------------- ------------- the behavior i'm seeing is that the DHCP server is offering 192.168.0.* IPs and sending them back to 192.168.0.1, which it can't reach. i tried masquerading the packets sent by the relay agent but that doesn't seem to work. from what i've been reading, this is normal behavior since the DHCP server uses the GIADDR as the destination address for its OFFERs, and not the actual source IP of the packets it receives from the relay agent. sooo, given that my DHCP server needs to be "on the other side of the internet" as depicted above, how can i get this working? are there settings for dhcpd to do this or is creating a VPN containing the DHCP server and the relay agent the only way? thanks!

  Read the article

• DHCP server inside a virtual machine can't see other machines

  - by William

  Hi, I setup a private network from virtual machines and one of the machines is the DHCP server for the group. I want to specify a next-server for the DHCP server but I'm having trouble connecting to any of the machines that I lease IPs to. I'm just trying to do a simple ping/ssh to 10.0.0.252 (a machine with a lease) but it doesn't seem to respond. Any advice? I'm assuming I need to be able to connect to my next-server but maybe I'm wrong. Thanks.

  Read the article

• syslog log of TCP packet

  - by com

  Occasionally, I noticed a lot of following messsages in syslog Nov {datetime} hostname kernel: [8226528.586232] AIF:PRIV TCP packet: IN=eth0 OUT= MAC={mac} SRC={sourceip} DST={destinationip} LEN=60 TOS=0x00 PREC=0x00 TTL=63 ID=20361 DF PROTO=TCP SPT=39950 DPT=37 WINDOW=14600 RES=0x00 SYN URGP=0 On the Internet, I found that DOS attack may cause such type of output, unfortunately, I don't understand what does this log mean. The only thing is clear for me is this log is related to network. The source host is the host where nagios is installed. Does it mean nagios somehow does behave well? And what does it mean at all?

  Read the article

• Network bandwidth usage dashboard?

  - by SkippyFlipjack

  I have a couple of wifi access points hooked up to my home network, one of which I keep unsecured for some development I do; there are only a couple other homes within range and they've got their own wifi so it's not a big concern. I also have a Sonos system, Tivo, Roku, a couple laptops, a couple phones, an iPad and a desktop machine, all of which are internet-smart. So when my internet bandwidth tanks and it takes five minutes to load a YouTube video, I want to know what's going on, and there are many potential culprits. I'd like to be able to plug my MacBook into the primary router and see a nice little dashboard of the units on the network and what kind of bandwidth each is using at that moment. I could figure this out from WireShark or tcpdump but figure there has to be an easier way. I've tried a few different commercial products but none really presented the right info. Suggestions? (This may be a question for superuser since my Apple Time Capsule's SNMP capabilities are limited, but I figure admins of small business networks would have dealt w/ the same issue..)

  Read the article

• If the WiFi switched on, should it disable the ethernet? [closed]

  - by Peter Stuart

  My friend having problems with her laptop and I am trying to help her via SMS. She can't get her laptop connected to the internet via the Ethernet connection and there is no WiFi in the area. Could it be because her WiFi is switch on, she is using an acer aspire. If she manually switches it off could that allow the ethernet connecttion to work? Or is it a missing driver? The cable works fine as her someone else tried it. Thanks Peter

  Read the article

• DD-WRT - Where's the best place to get a LinkSys WRT54G V1.0?

  - by Giffyguy

  Looking for the initial release of the LinkSys WRT54G, not V1.1 or V2.0 or anything like that. If it comes with DD-WRT pre-installed, even better. That being said, I suppose a side question would be whether SU recommends different hardware. After all, DD-WRT may have been originally built for the WRT54G and the WRT54Gv1.0 may have better hardware than any of the successive models, but it's still fairly dated. Are there newer routers that are more stable or performant with DD-WRT?

  Read the article

• How can I disable internet for a specific interface in Windows 7?

  - by MGSoto

  I have two NICs on my machine, one which connects to my network and has my internet connection. The other connects to a buddy next doors network with his internet connection. I don't want Windows magically deciding which internet connection to use, I want it to use mine. I've had some success by blanking out DNS servers for his connection, but then I also lose hostname resolution on his network and I realize this doesn't solve everything 100%. How can I force Windows to use only my connection while avoiding the use of a router?

  Read the article

• Throughput and why do ISPs sell too much bandwidth?

  - by jonescb

  I hope the question made sense how I worded it. :) I've been wondering, maximum theoretical bandwidth is measured as RWIN/RTT (Window size / round trip time) Source 1 and Souce 2 So if a major city only 100 miles away gives me a ping of 50ms, and I have the default 64kb TCP window size then my maximum throughput will be 12.5Mb/s. Everything further away would give me a higher ping and therefore a lower throughput. Is there any reason to buy something like FiOS with a 50Mb/s or greater connection? Will you ever be able to reach that kind of speed? I know you can increase the TCP window size to increase throughput, but it has to be at both ends which is a deal breaker because you can't control the server. I'm assuming other network protocols like UDP aren't quite as affected by latency as TCP is, but how much of overall network traffic does non-TCP make up vs TCP. Am I just misguided about how throughput works? But if the above is correct, then why should a consumer like me buy way more bandwidth than can be realistically used. Maybe the only reason is for downloading multiple things at once, or one thing from multiple servers/peers?

  Read the article

• How do bots access directories on a server that are not DocumentRoot of public IP address? How do I stop them?

  - by tmsimont

  I have a local network set up with apache2 and "named" running on OpenSuse 13.1 Linux. I used the "named" service to use my computer as a domain server. I set up my router to point to ask my computer for domain lookups, so I have a chance to have it rewrite a bunch of domains on my network to its own local IP, 192.168.0.111 This works great. I use virtual host configuration to allow various domains and subdomains (re-routed to the same IP via named) to pull up different directories in my computer. For example: <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias fmb.wa.net DocumentRoot /home/work/wa.net/fmb </VirtualHost> <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias postrecord.wa.net DocumentRoot /home/work/wa.net/postrecord </VirtualHost> <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias cvalley.wa.net DocumentRoot /home/work/wa.net/cvalley_local </VirtualHost> This makes it possible for me to hit cvalley.wa.net from any device in my network and get the site that lives in /home/work/wa.net/cvalley_local I decided to forward port 80 to this computer, so I could share a few development sites with coworkers. I can't control which site they see with the same named service, because they'd have to use my computer as their domain name server... So I added a line like this: <VirtualHost *:80> ServerName 192.168.0.111 ServerAlias MY.IP.XXX.XX DocumentRoot /home/work/wa.net/cvalley </VirtualHost> Where "MY.IP.XXX.XX" is my public IP address. This works as expected, when you hit my IP address from a public network you see the site that lives in /home/work/wa.net/cvalley. The point of confusion that I have is that there are public IP addresses in my logs in other sites. I would have expected it to be impossible to access other sites in my network, unless the public user somehow figured out what I'm calling my ServerAliases, and is mimicing my domain set up... How can public traffic be hitting my other local sites? How can I recreate this kind of access? Here are some examples of public IP's hitting my VirtualHost sites: 162.253.66.76 - - [15/Aug/2014:19:20:47 -0600] "GET /xmlrpc.php HTTP/1.0" 404 1004 "-" "-" 162.253.66.74 - - [16/Aug/2014:10:50:28 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 185.4.227.194 - - [16/Aug/2014:11:16:45 -0600] "GET http://24x7-allrequestsallowed.com/?PHPSESSID=1rysxtj500143WQMVT%5E_NAZ%5BQ HTTP/1.1" 200 262 "-" "-" 101.226.254.138 - - [16/Aug/2014:13:32:14 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 162.253.66.74 - - [16/Aug/2014:14:26:19 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 212.129.2.119 - - [16/Aug/2014:16:00:51 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 91.240.163.111 - - [16/Aug/2014:18:34:32 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 162.253.66.74 - - [16/Aug/2014:19:02:53 -0600] "GET / HTTP/1.0" 200 262 "-" "masscan/1.0 (https://github.com/robertdavidgraham/masscan)" 122.226.223.69 - - [17/Aug/2014:05:53:09 -0600] "GET http://www.k2proxy.com//hello.html HTTP/1.1" 404 1006 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 6.1; WOW64; Trident/6.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; .NET4.0C; .NET4.0E)" ::1 - - [17/Aug/2014:10:19:26 -0600] "OPTIONS * HTTP/1.0" 200 - "-" "Apache/2.4.6 (Linux/SUSE) OpenSSL/1.0.1e PHP/5.4.20 (internal dummy connection)" 162.209.65.196 - - [17/Aug/2014:15:31:53 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 111.206.199.163 - - [18/Aug/2014:11:12:56 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 37.187.180.168 - - [18/Aug/2014:15:40:00 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" 62.210.38.226 - - [18/Aug/2014:18:35:16 -0600] "HEAD / HTTP/1.0" 200 - "-" "-" Is there anything that I can do to reliably deny public access by default, but allow it only in one VirtualHost?

  Read the article

• How to setup THIS IPv6 network

  - by Revolter

  I have a network mapped like this : just to experiment IPv6 connectivity, i want to configure my LAN network using IPv6, can some one explain me how to convert the connection between the Desktop and the Laptop to IPv6 without loosing the internet connection ? I don't want to access IPv6 internet, I need to keep my v4. So the end result will be something like an full-IPv6 Laptop accesing IPv4 internet over a some-how-configured Desktop that acting as a NAT.

  Read the article

• Software for monitoring web sites accessed via shared wireless connection?

  - by Anand

  Hi, I have shared my Internet connection to my neighbour using wireless network. Now I want to know what web sites he/she is accessing through my Internet connection. Please provide a list of free software that we can use to do this.

  Read the article

• Blacklist a single access point of a wireless network

  - by Zr40

  At my university, one of the wireless access points is failing. When something tries to associate to the network using that access point, it deassociates the client, claiming 802.1X authentication failure. Other access points do work normally using the same credentials. The issue has been reported, but after a month it still has still not been fixed. Now, I'm looking for a way to blacklist the access point's BSSID, so the OS prefers other access points on the same SSID. How can I blacklist specific BSSIDs in either Mac OS X Snow Leopard or Windows 7?

  Read the article

• Computer freezes, wireless network icon disappears

  - by Heidi

  As you can see I have two problems. I have a Toshiba Tecra A3 computer. It is 5-6 years old and it is connected to a D-link router. For a period now it has not been working correctly. The computer freezes either when i try turning it on or when I have been using the computer for a short period of time. The times the computer works normally I have a problem with a disappearing wireless network icon, and so I have no internet. Can this be fixed or do I have to buy a new computer? I only use the computer for internet surfing and easy tasks like word etc, so I would like to keep it as long as possible.

  Read the article

• How to get the speed of a network card on the command line?

  - by nelaar

  I am trying to see what the speed of some network cards on a remote server. Our reporting software says they are 10Mbps, but I am sure that is wrong they should be 1Gbps. Our monitoring software uses SNMP to query the servers, perhaps the servers are reporting information incorrectly. ifconfig does not report what the speed of the devices are. How can I see what the currently configured speed of the cards are.

  Read the article

• VM connected to network but not to internet in VMware Player 6 on Windows 8.1 host

  - by user1257262

  So I am running Bitnami's MEAN stack in VMware Player 6.0.2 on Windows 8.1 and the VM connects just fine to the network: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG However, I am having a great deal of trouble getting the VM to communicate with the internet. No matter what sort of action I take (even something as simple as apt-get update), the machine just sits there and eventually fails to connect. Here is my VM's Network Adapter configuration: https://www.dropbox.com/s/xfdzohjuuepz52w/ifconfig.PNG On my host Windows 8.1 computer, I actually have the VMware Bridge Protocol enabled but for VMware Network Adapters (VMnet1 and VMnet 8), but they are listed as having No Internet access in my Network and Sharing Center. I am not entirely sure if these adapters are relevant to connecting the VM to the internet, to be honest. This is the first time I have ever had an issue connecting a virtual machine to the internet. This problem is also happening with other VM's I am trying to run. Can someone tell me what I am doing wrong and how I can fix it?

  Read the article

• Public Wi-Fi and software updates

  - by coding4fun

  According to Microsoft, "Never update your software on a public Internet connection." So I have some questions. 1. What if a public Wi-Fi hotspot is the only Internet available, ever? Never update anything? 2. What happens if Windows or some other program is set to update automatically and attempts to do so while you are using a public Wi-Fi? Disable all automatic updates on all software? 3. Will VPN help to secure software updates? If so, how to go about it? Thanks.

  Read the article

• Network Share unavailable after DNS Change

  - by Justin Largey

  Hi, I have a server, called Server1 with various network shares on it. Our users map to this share using \\Server1\FileShareName1. During a DR Test, we rerouted all network traffic from Server1 to Server21. All folder shares are set up on Server21. We were hoping the the network shares would still be accessible using \\Server1\FileNameShare1, unfortunately, they are not. Does anyone know why this is happening? This is a Win2003 Environment, and DNS was flushed. I confirmed that IP addresses are matching between the two servers. Any help or insight is much appreciated.

  Read the article

• Wireless range extender throughput extremely slow.

  - by Alan B

  I've got a Belkin 54G router connected to the internet, and a Belkin range extender model F5D7132. I can get the range extender connected to the parent router SSID no problem, in repeater mode as opposed to access point mode. My Windows 7 laptop connects to the extender, which has a different SSID, and it connects with the full 5 bars. The issue is that when going through the extender internet performance is murderously slow, even getting the config pages of the extender or router is bad. When I connect directly to the router, all is well.

  Read the article

• Windows Server 2008 R2 foundation VM unable to detect network adaptor

  - by user50273

  I created a Windows Server 2008 R2 foundation VM on Windows Server 2008 using Hyper-V. But I am not able to connect to internet from the VM. If I goto device manager, the network adapter branch itself is missing. I searched in google and few sites suggested I need to install the Integration Services although in one site they said Server 2008 R2 comes with integration services installed. Anyways I tried to install IntegrationServices using hyper-v but I get error dialog "error: unable to launch one of the update programs". Any suggestions on what am I supposed to do?

  Read the article

• Do I have to use a DNS PTR?

  - by JrSysAdmin

  I am currently working on a site in my free time with a few other guys and we are wanting to redirect xxx.com to our new site, yyy.com. So we have xxx.com set to redirect the 216.111.11.1 which is the IP for yyy.com. However, this just says the website is unavailable so it seems as though we need a DNS PTR to redirect 216.111.11.1 to yyy.com. Is there any way to do this without a DNS PTR? The pointer will cost us $15 and it just seems like there should be some better way to go about doing this. Any ideas?

  Read the article

< Previous Page | 194 195 196 197 198 199 200 201 202 203 204 205  | Next Page >