Search Results

Search found 15160 results on 607 pages for 'boot disk'.

Page 199/607 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

• TrueCrypt partition will no longer mount

  - by sparkyuiop

  I am hoping for some advice to help me out of my situation, with luck. I have a computer running Windows 7 Ultimate x64 with 3 hard disks installed. On my 2TB hard disk 2 (non-system disk) I have 4 partitions. One is for music, another for video, a downloads partition and a 500GB RAW Truecrypt encrypted partition / volume that I had setup to mount with 4 photographs used as keyfiles. The 4 photographs are located in my 'Documents' partition which is one of four partitions on my 1.5TB hard disk 1 (non-system disk) When I setup the disk encryption I did not (I'm 99% sure) create a password, I only used the 4 photograph keyfiles to mount the volume. Recently my 1TB hard disk 0 (system / boot) started to fail so I decided to replace it. I was going to clone the old disk to a new disk but decided that a fresh installation would be more beneficial. Once I had transferred all the required 'User Data' from my old hard disk 0 (C: disk) I discarded it. I reinstalled Truecrypt, pointed to the partition, selected my 4 keyfiles photographs and I mounted my encrypted volume with no issues. In fact I mounted it several times after re-installing Windows and after reboots. Now all of a sudden when I try and mount it I get the message "incorrect keyfile(s) and/or password or not a Truecrypt volume". Now I am not sure why this happened as I do not recall exactly what I did between last mounting the volume successfully and it not mounting. Here are some of the possible things I may have done to cause it to stop working but I am at a loss as to where to start to try and resolve the problem. 1. I had swapped the drive letters to a preferred order. 2. I possibly swapped the physical SATA connectors on the mainboard. 3. I enabled 'Hot Plugging' for the two non-system hard disk SATA ports and the DVD SATA port in the BIOS. I have tried changing the encrypted partition drive letter as suggested in another post but this does not help. On my old system the encrypted drive was drive "X". I have about tried it with all the other free drive letters but alas nothing changes. I do not recall what drive letter was allocated to the encrypted partition before I changed them all. I have not tried to change the letter back to what it possibly was to start with as I am happy with the current layout. I will try this is anyone thinks it would be worthwhile though. I do hope I have managed to convey my situation in an understandable manner and live in hope someone could help me recover years of personal files. Thank you very much for taking the time to read my post and for any suggestions you may offer. Regards Phillip Thorne (UK) Anyone???

  Read the article

• What does 'Can't sync file './database_name/…frm' to disk (Errcode: 28)' mean?

  - by cool_cs

  I am getting this error message whenever I try to create a new index or a new table in my mysql server. Does anyone know what the reason is? This is the ouput after I run df -a Filesystem Size Used Avail Use% Mounted on /dev/sda2 13G 7.3G 4.5G 63% / /dev/sda1 251M 27M 212M 12% /boot tmpfs 3.9G 0 3.9G 0% /dev/shm 10.156.248.29:/vol/pharos_pnxd_data_01/env_empty_sbid_27133_qdcprod 30G 30G 32K 100% /app

  Read the article

• VM Virtual guest machine disk defrag improves performance, myth or reality?

  - by jafin

  In operation of a virtual Vmware or Hyper-V guest typically advice is given to defrag the host and virtual disk images so to result in improved performance. Something like a cmd: vmware-vdiskmanager -d <file.vmdk> works great. Yet I can't find any qualitive evidence that suggest defraging inside the guest VM improves performance. Does anyone have advice or evidence that doesn't come from a commercial defragger's whitepaper that suggests inside guest defragging helps?

  Read the article

• Should I get a SSD or a normal laptop hard disk?

  - by Mirage

  I have the option for a 128 GB SSD drive or a 500 GB normal hard disk drive. What should I prefer on a laptop? Is SSD worth it because I need more space and that is more important?

  Read the article

• Boot custom linux up by pressing Lenovo OKR button?

  - by Semmu

  I have a Lenovo Y510p laptop and I'm a Linux user, use Windows only for gaming. The device had no OS when I bought it and I also installed an SSD besides the 1TB hard drive. I would like to "hack" the One-Key-Recovery button, because I have no interest in its default behaviour (I don't need Windows recovery), but if I could boot up a hidden, fail-safe Linux with it, that would be great. How could I achieve it? I tried to search what the button does, but I only found some installers for Windows that could magically create a partition for the recovery. I would like to override this behaviour completely to boot up something else.

  Read the article

• Why is Core Data not persisting these changes to disk?

  - by scott

  I added a new entity to my model and it loads fine but no changes made in memory get persisted to disk. My values set on the car object work fine in memory but aren't getting persisted to disk on hitting the home button (in simulator). I am using almost exactly the same code on another entity in my application and its values persist to disk fine (core data - sqlite3); Does anyone have a clue what I'm overlooking here? Car is the managed object, cars in an NSMutableArray of car objects and Car is the entity and Visible is the attribute on the entity which I am trying to set. Thanks for you assistance. Scott - (void)viewDidLoad { myAppDelegate* appDelegate = (myAppDelegate*)[[UIApplication sharedApplication] delegate]; NSManagedObjectContext* managedObjectContex = appDelegate.managedObjectContext; NSFetchRequest* request = [[NSFetchRequest alloc] init]; NSEntityDescription* entity = [NSEntityDescription entityForName:@"Car" inManagedObjectContext:managedObjectContex]; [request setEntity:entity]; NSSortDescriptor* sortDescriptor = [[NSSortDescriptor alloc] initWithKey:@"Name" ascending:YES]; NSArray* sortDescriptors = [[NSArray alloc] initWithObjects:sortDescriptor, nil]; [request setSortDescriptors:sortDescriptors]; [sortDescriptors release]; [sortDescriptor release]; NSError* error = nil; cars = [[managedObjectContex executeFetchRequest:request error:&error] mutableCopy]; if (cars == nil) { NSLog(@"Can't load the Cars data! Error: %@, %@", error, [error userInfo]); } [request release]; } - (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath*)indexPath { Car* car = [cars objectAtIndex:indexPath.row]; if (car.Visible == [NSNumber numberWithBool:YES]) { car.Visible = [NSNumber numberWithBool:NO]; [tableView cellForRowAtIndexPath:indexPath].accessoryType = UITableViewCellAccessoryNone; } else { car.Visible = [NSNumber numberWithBool:YES]; [tableView cellForRowAtIndexPath:indexPath].accessoryType = UITableViewCellAccessoryCheckmark; } }

  Read the article

• how i can retrive files from folder on hard-disk and how to display uplaoded file data into a textar

  - by Deepak Narwal

  I have made a application form in which i am asking for username,password,email id and user's resume.Now after uploading resume i am storing it into hard disk into htdocs/uploadedfiles/..in a format something like this username_filename.In database i am storing file name,file size,file type.Some coading for this i am showing here $filesize=$_FILES['file']['size']; $filename=$_FILES['file']['name']; $filetype=$_FILES['file']['type']; $temp_name=$_FILES['file']['tmp_name']; //temporary name of uploaded file $pwd_hash = hash('sha1',$_POST['password']); $target_path = "uploadedfiles/"; $target_path = $target_path.$_POST['username']."_".basename( $_FILES['file']['name']); move_uploaded_file($_FILES['file']['tmp_name'], $target_path) ; $sql="insert into employee values ('NULL','{$_POST[username]}','{$pwd_hash}','{$filename}','{$filetype}','$filesize',NOW())"; Now i have two questions 1.NOw how i can display this file data into a textarea(something like naukri.com resume section) 2.How one can retrive that resume file from folder on hard-disk.What query should i write to fetch this file from that folder.I know how to retrive data from database but i dont know how to retrive data from a folder in hard-disk like in the case if user want to delete this file or he wnat to download this file.How i can do this

  Read the article

• How to R/W hard disk when CPU is in Protect Mode?

  - by smwikipedia

  I am doing some OS experiment. Until now, all my code utilized the real mode BIOS interrupt to manipulate hard disk and floppy. But once my code enabled the Protect Mode of the CPU, all the real mode BIOS interrupt service routine won't be available. How could I R/W the hard disk and floppy? I have a feeling that I need to do some hardware drivers now. Am I right? Is this why an OS is so difficult to develop? I know that hardwares are all controlled by reading from and writing to certain control or data registers. For example, I know that the Command Block Registers of hard disk range from 0x1F0 to 0x1F7. But I am wondering whether the register addresses of so many different hardwares are the same on the PC platform? Or do I have to detect that before using them? How to detect them?? For any responses I present my deep appreciation.

  Read the article

• Android: how to start a service at boot based on user-settings?

  - by Cicerone Cojocaru

  Hey everyone, I'm trying to write an app that consists of an activity that manages a background service. However, I want to implement a user setting for automatically starting the service up at boot time. I have user settings implemented with SharedPreferences and I have the services starting up at boot by using a BroadcastReceiver and listening for BOOT_COMPLETED. However, I can't figure out a good way to implement a setting so that the service is only started at boot if said setting is enabled. I can think of a few cheap ways to do this (such as messing with onCreate() in the service, or creating/checking for a file on SD card) but I want to follow good practice. There must be a good way to do this because there's tons of apps out there that do it, I just can't find anything online about how to do it. Thanks

  Read the article

• How does it hurt to use Linux (Ubuntu) as a guest OS for all my tasks?

  - by sauparna

  I have a machine running Windows, where the disk has two partitions C (50 GB) and D (250GB). I do research in Information Retrieval and need to work with a large corpus (more than 50 GB) and in Linux. So if I want to install Linux on the existing system, keeping the Windows installation intact, will it be fine to run it in a virtual box? (say, QEMU, VMWare, etc.) An alternative is using Wubi. In that case the Linux installation has to be on drive C. Then, if I keep a small Linux installation (say 5GB) on C, and my corpus on D (mounted in Linux), how will it affect the performance of my programs which would be accessing the mounted Windows drive D. Is it feasible to use Linux this way? Which of the above is better if at all they are a way out? Note : Since my post in July 2010, I have been using and have tried several ways of maintaining a disk-image that I can mount in Linux. I had a 100GB qcow2 disk and a 100GB raw disk, both formatted to an EXT3 file system. I was mounting and connecting to the qcow2 disk using qemu-nbd. The problem was that every now and then, the connection to the disk would get lost and the running programs would throw disk I/O errors. The raw disk would mount and work fine as a loop mounted device, but when writing data to it, the mount.ntfs program would hog the CPU and the process would take an enormous amount of time. I was in fact running make on a piece of software located on this raw disk, and after a point of time make was waiting while mount.ntfs would show 100% CPU usage.

  Read the article

• what's the difference between a Volume and a Partition in Windows 7 diskpart

  - by user170232

  I was trying to follow the Intel guide for setting up iRST (Intel Rapid Start Technology) on my new laptop. The Intel manual says you need to create a *Volume that is as big or bigger than your available memory, set it to a specific id (id=84), then go into the iRST tool and adjust some settings. Looking at the disk manager on the laptop, I see there is already a Partition labeled as "Hibernation Partition" which is a little bigger than the memory in my system. So it looks like iRST was already set up...BUT, it's a Partition, not a Volume. Here's what the manual says to do: (from: http://download.intel.com/support/motherboards/desktop/sb/rapid_start_technology_user_guide.pdf) diskpart list disk select disk x (where x is the disk to use, there's only one disk in this laptop) create partition primary size=X000 (where X000 is the size to create) detail disk (which lists details for the disk. This is where i get hung up) select volume Z (where Z is the *partition you created previously) ** it says the 'detail disk' command will list the volume #, but it doesn't. ** 'detail disk' only lists two "volumes" for Recovery and OS. ** if i do 'list partition', i see the 8 GB *partition labeled as "Hibernation Partition") ** so I can't continue with the following steps: set id=84 override exit The reason I went looking for the manual is because when iRST is enabled in the BIOS, the system won't resume from sleep. When it's disabled, it works fine, but the system goes into (legacy?) Hibernation mode and takes a while to come out of Hibernation. the iRST is supposed to resume from deep sleep very quickly. So, what's the difference between a Volume and a Partition? Should I delete the Hibernation Partition and create a Hibernation Volume? Anyone have any ideas? (if it matters, this is on a Dell XPS 13 with BIOS A08) Thanks! J

  Read the article

• OS X Hard drive recovery

  - by Adam

  I am trying to recover data from a bad Seagate 1TB hard drive in a 2010 iMac. One day the iMac wouldn't boot (stuck at gray screen on startup). I removed the hard drive from the iMac and connected it to a MacBook using a 3.5" HDD to USB adapter. The hard drive wouldn't mount but it did display in Disk Utility that that there were 2 partitions on the disk. I tried to run Disk Warrior and it showed thousands of errors but still wouldn't mount. At this time the hard drive only show one partition in Disk Utility. Next I tried putting the hard drive in a desktop PC and running Spin Rite - which then gave me several division overflow errors (even with running Spin Rite with a newer version of DOS). The SMART status on the drive reports that the drive has had failures and HD Tune referenced the drive had once hit 59 degrees celsius. Disk Utility gives me the following message when running a pair: Error: Disk Utility can’t repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files. Overall, the hard drive spins up and sounds OK - there are no clicking noises but the hard drive won't mount and displays as a light gray "Macintosh HD" in disk utility. Any tips or advice on how to recover data on this drive would be GREATLY appreciated! Are there any other tools I can try before calling it quits on this drive? Thank you

  Read the article

• Hard drive not correctly recognized on a new Windows 7 installation, but works correctly on Windows XP

  - by david

  I'm having problems configuring a hard disk in a brand new, clean Windows 7 installation. System specs: Hard disk: WD VelociRaptor WD6000HLHX (600 GB, 10000 RPM) Motherboard: Gigabyte Z77X-UD3H BIOS SATA mode set to AHCI (not RAID), with disk connected to SATA0 (6 Gb/s port). Windows 7 Enterprise SP1 64-bit The disk is recognized by the BIOS and is correctly identified, with the name and size correctly reported. Windows recognizes the disk itself and reports the device is functioning correctly, but it doesn't appear in Explorer. Disk Management shows the drive, but incorrectly states that it is uninitialized and has no partitions. If I try to initialize the drive, I get an error saying that "the system cannot find the file specified" (what file?). Before connecting the drive to the new machine, I partitioned and formatted it under Windows XP SP2, creating 2 partitions (MBR, not GPT) and copying over a boatload of data. However, none of this data appears under Windows 7. If I put the disk back into the Windows XP machine, I can access the disk and all of its data. Is it possible to get Windows 7 to correctly recognize the disk without having to erase it and start over? If so, how do I do so? I checked this question, which seems to cover the same issue, but it didn't help.

  Read the article

• What do the readonly attributes in diskpart really mean?

  - by marzipan

  I am wondering exactly what the meaning is of the "Read-only" disk and volume attributes that you can twiddle in diskpart on Windows 7. I am trying to set up an external USB drive as an installation medium for my own software, so I'd like to protect it against casual or inadvertent changes by users who it is given to, so they don't screw up the installation files they might need in the future. From what I can tell by experimentation with diskpart, the volume read-only attribute is actually stored on the physical disk somewhere, because I can set it and it shows up when I take the drive to another machine. This is great because my users can't (easily) change any of the files on the volume, or format it from Windows explorer. However, the disk read-only attribute seems to be just an aspect of how the current machine is accessing the drive. When I set it I can no longer delete the volume in the disk via Disk Management, but when I take the drive to another machine, the attribute is no longer set and in Disk Management I can delete the volume on the disk. I guess I'm not that worried about my users doing that, but I am annoyed that I don't understand what these attributes are really doing. Another thing that I don't understand is that the "volume" read-only attribute actually seems to be global to the disk - if I have two volumes on the disk, and I set the readonly flag on one of them, then it gets set on the other one too. ?!? I have the feeling I'm not searching for the right docs - all I'm finding is diskpart docs that give the syntax for twiddling these attributes, not what they really mean. Any pointers would be very welcome! Thanks, Asa

  Read the article

• How does it hurt to use Linux (Ubuntu) as a guest OS for all my tasks?

  - by sauparna

  I have a machine running Windows, where the disk has two partitions C (50 GB) and D (250GB). I do research in Information Retrieval and need to work with a large corpus (more than 50 GB) and in Linux. So if I want to install Linux on the existing system, keeping the Windows installation intact, will it be fine to run it in a virtual box? (say, QEMU, VMWare, etc.) An alternative is using Wubi. In that case the Linux installation has to be on drive C. Then, if I keep a small Linux installation (say 5GB) on C, and my corpus on D (mounted in Linux), how will it affect the performance of my programs which would be accessing the mounted Windows drive D. Is it feasible to use Linux this way? Which of the above is better if at all they are a way out? Note : Since my post in July 2010, I have been using and have tried several ways of maintaining a disk-image that I can mount in Linux. I had a 100GB qcow2 disk and a 100GB raw disk, both formatted to an EXT3 file system. I was mounting and connecting to the qcow2 disk using qemu-nbd. The problem was that every now and then, the connection to the disk would get lost and the running programs would throw disk I/O errors. The raw disk would mount and work fine as a loop mounted device, but when writing data to it, the mount.ntfs program would hog the CPU and the process would take an enormous amount of time. I was in fact running make on a piece of software located on this raw disk, and after a point of time make was waiting while mount.ntfs would show 100% CPU usage.

  Read the article

• Windows CE: Using IOCTL_DISK_GET_STORAGEID

  - by Bruce Eitman

  A customer approached me recently to ask if I had any code that demonstrated how to use STORAGE_IDENTIFICATION, which is the data structure used to get the Storage ID from a disk. I didn’t have anything, which of course sends me off writing code and blogging about it. Simple enough, right? Go read the documentation for STORAGE_IDENTIFICATION which lead me to IOCTL_DISK_GET_STORAGEID. Except that the documentation for IOCTL_DISK_GET_STORAGEID seems to have a problem.   The most obvious problem is that it shows how to call CreateFile() to get the handle to use with DeviceIoControl(), but doesn’t show how to call DeviceIoControl(). That is odd, but not really a problem. But, the call to CreateFile() seems to be wrong, or at least it was in my testing. The documentation shows the call to be: hVolume = CreateFile(TEXT("\Storage Card\Vol:"), GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL); I tried that, but my testing with an SD card mounted as Storage Card failed on the call to CreateFile(). I tried several variations of this, but none worked. Then I remembered that some time ago I wrote an article about enumerating the disks (Windows CE: Displaying Disk Information). I pulled up that code and tried again with both the disk device name and the partition volume name. The disk device name worked. The device names are DSKx:, where x is the disk number. I created the following function to output the Manufacturer ID and Serial Number returned from IOCTL_DISK_GET_STORAGEID:   #include "windows.h" #include "Diskio.h"     BOOL DisplayDiskID( TCHAR *Disk ) {                 STORAGE_IDENTIFICATION *StoreID = NULL;                 STORAGE_IDENTIFICATION GetSizeStoreID;                 DWORD dwSize;                 HANDLE hVol;                 TCHAR VolumeName[MAX_PATH];                 TCHAR *ManfID;                 TCHAR *SerialNumber;                 BOOL RetVal = FALSE;                 DWORD GLE;                   // Note that either of the following works                 //_stprintf(VolumeName, _T("\\%s\\Vol:"), Disk);                 _stprintf(VolumeName, _T("\\%s"), Disk);                   hVol = CreateFile( Disk, GENERIC_READ|GENERIC_WRITE, 0, NULL, OPEN_EXISTING, 0, NULL);                   if( hVol != INVALID_HANDLE_VALUE )                 {                                 if(DeviceIoControl(hVol, IOCTL_DISK_GET_STORAGEID, (LPVOID)NULL, 0, &GetSizeStoreID, sizeof(STORAGE_IDENTIFICATION), &dwSize, NULL) == FALSE)                                 {                                                 GLE = GetLastError();                                                 if( GLE == ERROR_INSUFFICIENT_BUFFER )                                                 {                                                                 StoreID = (STORAGE_IDENTIFICATION *)malloc( GetSizeStoreID.dwSize );                                                                 if(DeviceIoControl(hVol, IOCTL_DISK_GET_STORAGEID, (LPVOID)NULL, 0, StoreID, GetSizeStoreID.dwSize, &dwSize, NULL) != FALSE)                                                                 {                                                                                 RETAILMSG( 1, (TEXT("DisplayDiskID: Flags %X\r\n"), StoreID->dwFlags ));                                                                                 if( !(StoreID->dwFlags & MANUFACTUREID_INVALID) )                                                                                 {                                                                                                 ManfID = (TCHAR *)((DWORD)StoreID + StoreID->dwManufactureIDOffset);                                                                                                 RETAILMSG( 1, (TEXT("DisplayDiskID: Manufacture ID %s\r\n"), ManfID ));                                                                                 }                                                                                 if( !(StoreID->dwFlags & SERIALNUM_INVALID) )                                                                                 {                                                                                                 SerialNumber = (TCHAR *)((DWORD)StoreID + StoreID->dwSerialNumOffset);                                                                                                 RETAILMSG( 1, (TEXT("DisplayDiskID: Serial Number %s\r\n"), SerialNumber ));                                                                                 }                                                                                 RetVal = TRUE;                                                                 }                                                                 else                                                                                 RETAILMSG( 1, (TEXT("DisplayDiskID: DeviceIoControl failed (%d)\r\n"), GLE));                                                                                                                                                 free(StoreID);                                                 }                                                 else                                                                 RETAILMSG( 1, (TEXT("No Disk Identifcation available for %s\r\n"), VolumeName ));                                 }                                 else                                                 RETAILMSG( 1, (TEXT("DisplayDiskID: DeviceIoControl succeeded (and shouldn't have)\r\n")));                                                                                 CloseHandle (hVol);                 }                 else                                 RETAILMSG( 1, (TEXT("DisplayDiskID: Failed to open volume (%s)\r\n"), VolumeName ));                   return RetVal; } Further testing showed that both \DSKx: and \DSKx:\Vol: work when calling CreateFile();   Copyright © 2010 – Bruce Eitman All Rights Reserved

  Read the article

• cannot make ubuntu 64-bit v12.04 install work

  - by honestann

  I decided it was time to update my ubuntu (single boot) computer from 64-bit v10.04 to 64-bit v12.04. Unfortunately, for some reason (or reasons) I just can't make it work. Note that I am attempting a fresh install of 64-bit v12.04 onto a new 3TB hard disk, not an upgrade of the 1TB hard disk that contains my working 64-bit v10.04 installation. To perform the attempted install of v12.04 I unplug the SATA cable from the 1TB drive and plug it into the 3TB drive (to avoid risking damage to my working v10.04 installation). I downloaded the ubuntu 64-bit v12.04 install DVD ISO file (~1.6 GB) from the ubuntu releases webpage and burned it onto a DVD. I have downloaded the DVD ISO file 3 times and burned 3 of these installation DVDs (twice with v10.04 and once with my winxp64 system), but none of them work. I run the "check disk" on the DVDs at the beginning of the installation process to assure the DVD is valid. When installation completes and the system boots the 3TB drive, it reports "unknown filesystem". After installation on the 250GB drives, the system boots up fine. During every install I plug the same SATA cable (sda) into only one disk drive (the 3TB or one of the 250GB drives) and leave the other disk drives unconnected (for simplicity). It is my understanding that 64-bit ubuntu (and 64-bit linux in general) has no problem with 3TB disk drives. In the BIOS I have tried having EFI set to "enabled" and "auto" with no apparent difference (no success). I never bothered setting the BIOS to "non-EFI". I have tried partitioning the drive in a few ways to see if that makes a difference, but so far it has not mattered. Typically I manually create partitions something like this: 8GB /boot ext4 8GB swap 3TB / ext4 But I've also tried the following, just in case it matters: 8GB boot efi 8GB swap 8GB /boot ext4 3TB / ext4 Note: In the partition dialog I specify bootup on the same drive I am partitioning and installing ubuntu v12.04 onto. It is a VERY DANGEROUS FACT that the default for this always comes up with the wrong drive (some other drive, generally the external drive). Unless I'm stupid or misunderstanding something, this is very wrong and very dangerous default behavior. Note: If I connect the SATA cable to the 1TB drive that has been my ubuntu 64-bit v10.04 system drive for the past 2 years, it boots up and runs fine. I guess there must be a log file somewhere, and maybe it gives some hints as to what the problem is. I should be able to boot off the 1TB drive with the 3TB drive connected as a secondary (non-boot) drive and get the log file, assuming there is one and someone tells me the name (and where to find it if the name is very generic). After installation on the 3TB drive completes and the system reboots, the following prints out on a black screen: Loading Operating System ... Boot from CD/DVD : Boot from CD/DVD : error: unknown filesystem grub rescue> Note: I have two DVD burners in the system, hence the duplicate line above. Note: I install and boot 64-bit ubuntu v12.04 on both of my 250GB in this same system, but still cannot make the 3TB drive boot. Sigh. Any ideas? ========== motherboard == gigabyte 990FXA-UD7 CPU == AMD FX-8150 8-core bulldozer @ 3.6 GHz RAM == 8GB of DDR3 in 2 sticks (matched pair) HDD == seagate 3TB SATA3 @ 7200 rpm (new install 64-bit v12.04 FAILS) HDD == seagate 1TB SATA3 @ 7200 rpm (64-bit v10.04 WORKS for two years) HDD == seagate 250GB SATA2 @ 7200 rpm (new install 64-bit v12.04 WORKS) HDD == seagate 250GB SATA2 @ 7200 rpm (new install 64-bit v12.04 WORKS) GPU == nvidia GTX-285 ??? == no overclocking or other funky business USB == external seagate 2TB HDD for making backups DVD == one bluray burner (SATA) DVD == one DVD burner (SATA) 64-bit ubuntu v10.04 has booted and run fine on the seagate 1TB drive for 2 years.

  Read the article

• Plymouth and GRUB do not show at all

  - by WarriorIng64

  I am using Ubuntu 11.04 64-bit as my only OS on my desktop computer, which used to only run Ubuntu 10.04 LTS until I had the time to upgrade it with a fresh install. It uses integrated NVIDIA graphics (listed as a GeForce 6150SE nForce 430 by the NVIDIA X Server Settings utility) with the current proprietary driver as provided by the Additional Drivers utility, and has a VGA connection to a 1680x1050 Acer monitor. I used to get the (ugly-looking version of) Plymouth graphical boot screen while under 10.04. It didn't look that great, but I was fine with it. Now, it doesn't show on 11.04 at all during boot (I just get an error message in a moving gray box from the monitor saying "Input Not Supported"), and only rarely it will show on shutdown, all garbled up. I could not get GRUB to show during boot while holding down Shift, either (same error message), but pressing Enter while it should be up starts the system normally. A picture of the error message I was getting: Once fully booted, the system still shows the login screen and desktop just fine. Any information on how to troubleshoot this would be appreciated. If there's any hardware-specific stuff I forgot to include here, let me know the relevant commands to run in a comment below. Things that I've tried: Running plymouth in a framebuffer: no effect Booting with nomodeset as my grub boot: option no effect Booting with nomodeset and plymouth in a framebuffer: no effect other than Plymouth showing during shutdown only Following the Softpedia instructions for fixing Plymouth's resolution: Problem mostly solved, except logo does not show in Plymouth during boot, and both grub and Plymouth are slightly off-center #4 above, but with nomodeset removed as a grub boot option: same effect as #4 #5 above, but with vt.handoff=7 added as a grub boot option: same effect as #4 I have added the current contents of /etc/default/grub as requested in the comments: # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' GRUB_GFXMODE=1280x1024 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" CURRENT STATUS: I forgot to uncomment one line as per "things that I've tried" #4, so I took care of that. I can now see GRUB during startup when I hold Shift and a normal-looking Plymouth during shutdown...but Plymouth during boot is now just a solid purple screen. In each case, it's displayed a little off-center to the left, with a thin black bar running down the right side of the monitor. The error pictured above no longer shows. I'd say this problem is about 2/3 solved now. UPDATE: After Natty started freezing up on me, I decided to dual-boot with Oneiric, which unfortunately shows the same problems. Rather than trying all these workarounds though, I decided to do what I should have done from the start and file a pair of bug reports. LAST UPDATE: Bug 850908 has been confirmed as a legitimate nouveaufb bug. I have overwritten my 11.04 partition with 12.04 LTS, and I can confirm at this time that the issue is present there, as well. I will now flag this question to be closed, yet I hope it was helpful for anyone who experienced similar issues; if you are still having the same problem as me, please go there and mark yourself as affected. Thanks!

  Read the article

• installer can't find partition, but fdisk can find them

  - by pxd

  I'm installing ubuntu 12.04, my system had install 2 system -- winxp and ubuntu 10.10. Now, I want to update ubuntu to 12.04. I use usb disk to install 12.04. But, the installer can't not find my partition in my harddisk. But, the fdisk can find them. Can you help me? How to do? ubuntu@ubuntu:~$ sudo lshw -short H/W path Device Class Description system HP 2230s (NN868PA#AB2) /0 bus 3037 /0/9 memory 64KiB BIOS /0/0 processor Intel(R) Core(TM)2 Duo CPU T6570 @ 2.10GHz /0/0/1 memory 2MiB L2 cache /0/0/3 memory 32KiB L1 cache /0/0/0.1 processor Logical CPU /0/0/0.2 processor Logical CPU /0/2 memory 32KiB L1 cache /0/4 memory 2GiB System Memory /0/4/0 memory SODIMM [empty] /0/4/1 memory 2GiB SODIMM DDR2 Synchronous 800 MHz (1.2 ns) /0/100 bridge Mobile 4 Series Chipset Memory Controller Hub /0/100/2 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/2.1 display Mobile 4 Series Chipset Integrated Graphics Controller /0/100/1a bus 82801I (ICH9 Family) USB UHCI Controller #4 /0/100/1a.1 bus 82801I (ICH9 Family) USB UHCI Controller #5 /0/100/1a.2 bus 82801I (ICH9 Family) USB UHCI Controller #6 /0/100/1a.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #2 /0/100/1b multimedia 82801I (ICH9 Family) HD Audio Controller /0/100/1c bridge 82801I (ICH9 Family) PCI Express Port 1 /0/100/1c.1 bridge 82801I (ICH9 Family) PCI Express Port 2 /0/100/1c.1/0 wlan1 network PRO/Wireless 5100 AGN [Shiloh] Network Connection /0/100/1c.2 bridge 82801I (ICH9 Family) PCI Express Port 3 /0/100/1c.4 bridge 82801I (ICH9 Family) PCI Express Port 5 /0/100/1c.5 bridge 82801I (ICH9 Family) PCI Express Port 6 /0/100/1c.5/0 eth1 network 88E8072 PCI-E Gigabit Ethernet Controller /0/100/1d bus 82801I (ICH9 Family) USB UHCI Controller #1 /0/100/1d.1 bus 82801I (ICH9 Family) USB UHCI Controller #2 /0/100/1d.2 bus 82801I (ICH9 Family) USB UHCI Controller #3 /0/100/1d.7 bus 82801I (ICH9 Family) USB2 EHCI Controller #1 /0/100/1e bridge 82801 Mobile PCI Bridge /0/100/1f bridge ICH9M LPC Interface Controller /0/100/1f.2 scsi0 storage 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] /0/100/1f.2/0 /dev/sda disk 500GB WDC WD5000BEVT-0 /0/100/1f.2/0/1 /dev/sda1 volume 48GiB Windows NTFS volume /0/100/1f.2/0/2 /dev/sda2 volume 416GiB Extended partition /0/100/1f.2/0/2/5 /dev/sda5 volume 97GiB HPFS/NTFS partition /0/100/1f.2/0/2/6 /dev/sda6 volume 198GiB HPFS/NTFS partition /0/100/1f.2/0/2/7 /dev/sda7 volume 27GiB Linux filesystem partition /0/100/1f.2/0/2/8 /dev/sda8 volume 93GiB Linux filesystem partition /0/100/1f.2/1 /dev/cdrom disk CDDVDW TS-L633M /0/1 scsi6 storage /0/1/0.0.0 /dev/sdb disk 15GB STORAGE DEVICE /0/1/0.0.0/0 /dev/sdb disk 15GB /0/1/0.0.0/0/1 /dev/sdb1 volume 14GiB Windows FAT volume /1 power HZ04037 ubuntu@ubuntu:~$ ubuntu@ubuntu:~$ sudo fdisk -l Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x31263125 Device Boot Start End Blocks Id System /dev/sda1 * 63 102277727 51138832+ 7 HPFS/NTFS/exFAT /dev/sda2 102277728 976784129 437253201 f W95 Ext'd (LBA) /dev/sda5 102277791 307078127 102400168+ 7 HPFS/NTFS/exFAT /dev/sda6 307078191 724141151 208531480+ 7 HPFS/NTFS/exFAT /dev/sda7 724142080 781459455 28658688 83 Linux /dev/sda8 781461504 976771071 97654784 83 Linux Disk /dev/sdb: 15.9 GB, 15931539456 bytes 64 heads, 32 sectors/track, 15193 cylinders, total 31116288 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0009eb92 Device Boot Start End Blocks Id Systemfile:///home/ubuntu/Pictures/Screenshot%20from%202012-07-07%2010:25:40.png /dev/sdb1 * 32 31115263 15557616 c W95 FAT32 (LBA) ubuntu 12.04 installer can't find the partition in my hard disk, only find device - /dev/sda.(sorry, I'm new user, so can't send image.)

  Read the article

• mdadm: Win7-install created a boot partition on one of my RAID6 drives. How to rebuild?

  - by EXIT_FAILURE

  My problem happened when I attempted to install Windows 7 on it's own SSD. The Linux OS I used which has knowledge of the software RAID system is on a SSD that I disconnected prior to the install. This was so that windows (or I) wouldn't inadvertently mess it up. However, and in retrospect, foolishly, I left the RAID disks connected, thinking that windows wouldn't be so ridiculous as to mess with a HDD that it sees as just unallocated space. Boy was I wrong! After copying over the installation files to the SSD (as expected and desired), it also created an ntfs partition on one of the RAID disks. Both unexpected and totally undesired! . I changed out the SSDs again, and booted up in linux. mdadm didn't seem to have any problem assembling the array as before, but if I tried to mount the array, I got the error message: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so dmesg: EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! EXT4-fs (md0): group descriptors corrupted! I then used qparted to delete the newly created ntfs partition on /dev/sdd so that it matched the other three /dev/sd{b,c,e}, and requested a resync of my array with echo repair > /sys/block/md0/md/sync_action This took around 4 hours, and upon completion, dmesg reports: md: md0: requested-resync done. A bit brief after a 4-hour task, though I'm unsure as to where other log files exist (I also seem to have messed up my sendmail configuration). In any case: No change reported according to mdadm, everything checks out. mdadm -D /dev/md0 still reports: Version : 1.2 Creation Time : Wed May 23 22:18:45 2012 Raid Level : raid6 Array Size : 3907026848 (3726.03 GiB 4000.80 GB) Used Dev Size : 1953513424 (1863.02 GiB 2000.40 GB) Raid Devices : 4 Total Devices : 4 Persistence : Superblock is persistent Update Time : Mon May 26 12:41:58 2014 State : clean Active Devices : 4 Working Devices : 4 Failed Devices : 0 Spare Devices : 0 Layout : left-symmetric Chunk Size : 4K Name : okamilinkun:0 UUID : 0c97ebf3:098864d8:126f44e3:e4337102 Events : 423 Number Major Minor RaidDevice State 0 8 16 0 active sync /dev/sdb 1 8 32 1 active sync /dev/sdc 2 8 48 2 active sync /dev/sdd 3 8 64 3 active sync /dev/sde Trying to mount it still reports: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so and dmesg: EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! EXT4-fs (md0): group descriptors corrupted! I'm a bit unsure where to proceed from here, and trying stuff "to see if it works" is a bit too risky for me. This is what I suggest I should attempt to do: Tell mdadm that /dev/sdd (the one that windows wrote into) isn't reliable anymore, pretend it is newly re-introduced to the array, and reconstruct its content based on the other three drives. I also could be totally wrong in my assumptions, that the creation of the ntfs partition on /dev/sdd and subsequent deletion has changed something that cannot be fixed this way. My question: Help, what should I do? If I should do what I suggested , how do I do that? From reading documentation, etc, I would think maybe: mdadm --manage /dev/md0 --set-faulty /dev/sdd mdadm --manage /dev/md0 --remove /dev/sdd mdadm --manage /dev/md0 --re-add /dev/sdd However, the documentation examples suggest /dev/sdd1, which seems strange to me, as there is no partition there as far as linux is concerned, just unallocated space. Maybe these commands won't work without. Maybe it makes sense to mirror the partition table of one of the other raid devices that weren't touched, before --re-add. Something like: sfdisk -d /dev/sdb | sfdisk /dev/sdd Bonus question: Why would the Windows 7 installation do something so st...potentially dangerous? Update I went ahead and marked /dev/sdd as faulty, and removed it (not physically) from the array: # mdadm --manage /dev/md0 --set-faulty /dev/sdd # mdadm --manage /dev/md0 --remove /dev/sdd However, attempting to --re-add was disallowed: # mdadm --manage /dev/md0 --re-add /dev/sdd mdadm: --re-add for /dev/sdd to /dev/md0 is not possible --add, was fine. # mdadm --manage /dev/md0 --add /dev/sdd mdadm -D /dev/md0 now reports the state as clean, degraded, recovering, and /dev/sdd as spare rebuilding. /proc/mdstat shows the recovery progress: md0 : active raid6 sdd[4] sdc[1] sde[3] sdb[0] 3907026848 blocks super 1.2 level 6, 4k chunk, algorithm 2 [4/3] [UU_U] [>....................] recovery = 2.1% (42887780/1953513424) finish=348.7min speed=91297K/sec nmon also shows expected output: ¦sdb 0% 87.3 0.0| > |¦ ¦sdc 71% 109.1 0.0|RRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRRR > |¦ ¦sdd 40% 0.0 87.3|WWWWWWWWWWWWWWWWWWWW > |¦ ¦sde 0% 87.3 0.0|> || It looks good so far. Crossing my fingers for another five+ hours :) Update 2 The recovery of /dev/sdd finished, with dmesg output: [44972.599552] md: md0: recovery done. [44972.682811] RAID conf printout: [44972.682815] --- level:6 rd:4 wd:4 [44972.682817] disk 0, o:1, dev:sdb [44972.682819] disk 1, o:1, dev:sdc [44972.682820] disk 2, o:1, dev:sdd [44972.682821] disk 3, o:1, dev:sde Attempting mount /dev/md0 reports: mount: wrong fs type, bad option, bad superblock on /dev/md0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And on dmesg: [44984.159908] EXT4-fs (md0): ext4_check_descriptors: Block bitmap for group 0 not in group (block 1318081259)! [44984.159912] EXT4-fs (md0): group descriptors corrupted! I'm not sure what do do now. Suggestions? Output of dumpe2fs /dev/md0: dumpe2fs 1.42.8 (20-Jun-2013) Filesystem volume name: Atlas Last mounted on: /mnt/atlas Filesystem UUID: e7bfb6a4-c907-4aa0-9b55-9528817bfd70 Filesystem magic number: 0xEF53 Filesystem revision #: 1 (dynamic) Filesystem features: has_journal ext_attr resize_inode dir_index filetype extent flex_bg sparse_super large_file huge_file uninit_bg dir_nlink extra_isize Filesystem flags: signed_directory_hash Default mount options: user_xattr acl Filesystem state: clean Errors behavior: Continue Filesystem OS type: Linux Inode count: 244195328 Block count: 976756712 Reserved block count: 48837835 Free blocks: 92000180 Free inodes: 243414877 First block: 0 Block size: 4096 Fragment size: 4096 Reserved GDT blocks: 791 Blocks per group: 32768 Fragments per group: 32768 Inodes per group: 8192 Inode blocks per group: 512 RAID stripe width: 2 Flex block group size: 16 Filesystem created: Thu May 24 07:22:41 2012 Last mount time: Sun May 25 23:44:38 2014 Last write time: Sun May 25 23:46:42 2014 Mount count: 341 Maximum mount count: -1 Last checked: Thu May 24 07:22:41 2012 Check interval: 0 (<none>) Lifetime writes: 4357 GB Reserved blocks uid: 0 (user root) Reserved blocks gid: 0 (group root) First inode: 11 Inode size: 256 Required extra isize: 28 Desired extra isize: 28 Journal inode: 8 Default directory hash: half_md4 Directory Hash Seed: e177a374-0b90-4eaa-b78f-d734aae13051 Journal backup: inode blocks dumpe2fs: Corrupt extent header while reading journal super block

  Read the article

• Swap Mouse Buttons on startup

  - by andy boot

  This one bugs me. I fashioned this handy script to swap the left and right mouse buttons over: [My mouse is a Razer] /usr/bin/xinput set-button-map `xinput list | grep 'Razer' | grep -o \=[0-9]* | grep -o [0-9]*$` 3 2 1 4 5 6 7 8 1 10 11 12 13 When I run this in a Terminal it works. When I go to Startup Application Preferences - Add and then literally paste the above into the command field as an 'Additional startup program' It does not run on startup. Why not? I'm using Ubuntu 11-10 but this also applied to the 10-10

  Read the article

• Unmountable boot volume blue screen, what should I do?

  - by Josh

  I was trying to install an update from NVIDIA for my GTX 560, but while it was installing, my computer shut off. After a few minutes, I turned it back on. It got to the Windows boot screen and then had a blue screen error and if left on it would just keep doing that. A few details about my PC: I haven't added any new hardware or software, I'm running Windows XP Professional 32 bit and Windows XP Professional 64 bit on the same hard drive for about 2 years now. I have 2 other hard drives also, but I don't have one large enough to hold everything from my main hard drive, so formatting isn't an option. Now, as for what I've done so far: I've scanned the RAM with "memtest - 86 v3.4" and it said that it was good. I scanned the hard drive in question with chkdsk /r and it gets to 50% and tells me something along the lines of "the drive has one or more unrepairable problems". I also tried to use chkdsk on the drive I installed the new copy of Windows XP on and it got to 75% then jumped back down to 50% and stayed there (I had to reboot the pc). So, after that, I turned off auto reboot and got to read the blue screen error code and I looked it up only to find that nobody seems to have this problem, just problems close to it. The error code is 0x000000ed and I've seen a lot of these online but none that matched the detailed part of the code UNMOUNTABLE_BOOT_VOLUME 0x000000ed (0xfffffadf513c19a0, 0xffffffffc0000006, 0, 0) So, I have installed another copy of Windows XP Professional 32 bit on one of my other hard drives in hopes of accessing the data on the drive in question and when it booted it asked if I wanted chkdsk to scan the drive in question and this is what it found: file record segments 12740, 12741, 12742 and 12743 were reported unreadable. Then it says "recovering lost files" but it sits there for a few seconds and then just boots to Windows. I can't access the drive in question from Windows as far as I can tell, it just says "drive not accessible" and when I go to properties it says that the drive has 100% free space. So, after that failed I didn't give up, I looked for another way to access the drive in question. I used a Ubuntu bootable disk and was able to access the drive in question without any problems. However, I can't access the registry editor because it's a .exe file and that won't load from Ubuntu. I made a copy of the "Windows" folder and put it on one of my other drives and that's where I'm stuck at now. I'm sure my drive works fine, I know chkdsk can't fix the problem with it and I know what caused the problem in the first place for the most part, but I don't know what to do about it. I have a laptop that I can use to download and burn disks if needed and I also have the other copy of Windows XP Professional 32 bit that I can use that's installed on the computer in question (so I know it's not a hardware issue). I'm pretty sure it's a driver issue or the update was editing the registry when it shut off and left me when a broken registry. I've tried accessing C:\Windows\System32\CONFIG only to find that the Windows XP disk repair option can't even access the files on the drive in question. It seems I'll need to be able to do everything from Ubuntu unless there is something I haven't tried with the Windows XP disk. I didn't install the update on Windows XP 64 bit but yet it also has the same blue screen error (that's where the error code above came from but I haven't checked to see if they are the same). They both stopped working at the same time, so I assume it's one problem causing both to not work.

  Read the article

• What's the most efficient way to reclaim disk space after deleting lots of data from a database on Sybase ASE 15?

  - by Ernie Longmire

  As I understand it, based on some research but zero real-world experience with Sybase ASE, the only way to reclaim disk space once it's been allocated to a database is to export that database, create a new DB with the same schema, and reload all the exported data to the new database. Is this correct, or is there some other method? Then: assuming the above is correct and a full export-recreate-reload is required, what's the most efficient way to do that? Are there tools that will automate all or part of that process? I'm being told we would have to write separate bcp export and import commands for each and every object in the database, which if true sounds easily scriptable by someone who knows Sybase ASE well enough. (I don't.) This seems to me like a really basic housekeeping task, and it feels like I'm missing something obvious.

  Read the article

• Java Errors with jRuby on Rails on Google App Engine

  - by John Wang

  I followed all of the instructions so far from: http://code.google.com/p/appengine-jruby/wiki/RunningRails and http://gist.github.com/268192 Currently, I'm just trying to get to hello world. I'm getting these errors when I just run the dev_appserver.rb 238:hello-world jwang392$ dev_appserver.rb . => Booting DevAppServer => Press Ctrl-C to shutdown server => Generating configuration files 2010-04-08 09:16:51.961 java[411:1707] [Java CocoaComponent compatibility mode]: Enabled 2010-04-08 09:16:51.964 java[411:1707] [Java CocoaComponent compatibility mode]: Setting timeout for SWT to 0.100000 Apr 8, 2010 7:17:05 PM com.google.appengine.tools.development.ApiProxyLocalImpl log SEVERE: [1270754225387000] javax.servlet.ServletContext log: Warning: error application could not be initialized org.jruby.rack.RackInitializationException: no such file to load -- time from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25:in `boot!' from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10 from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1:in `load' from <script>:1 at org.jruby.rack.DefaultRackApplicationFactory $4.init(DefaultRackApplicationFactory.java:169) at org.jruby.rack.DefaultRackApplicationFactory.newErrorApplication(DefaultRac kApplicationFactory.java: 118) at org.jruby.rack.DefaultRackApplicationFactory.init(DefaultRackApplicationFac tory.java: 37) at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 26) at org.jruby.rack.RackServletContextListener.contextInitialized(RackServletCon textListener.java: 40) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java: 530) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java: 1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java: 448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.jetty.Server.doStart(Server.java:217) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at com.google.appengine.tools.development.JettyContainerService.startContainer (JettyContainerService.java: 188) at com.google.appengine.tools.development.AbstractContainerService.startup(Abs tractContainerService.java: 147) at com.google.appengine.tools.development.DevAppServerImpl.start(DevAppServerI mpl.java: 219) at com.google.appengine.tools.development.DevAppServerMain $StartAction.apply(DevAppServerMain.java:162) at com.google.appengine.tools.util.Parser $ParseResult.applyArgs(Parser.java:48) at com.google.appengine.tools.development.DevAppServerMain.<init>(DevAppServer Main.java: 113) at com.google.appengine.tools.development.DevAppServerMain.main(DevAppServerMa in.java: 89) Caused by: org.jruby.exceptions.RaiseException: no such file to load -- time at (unknown).new(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at Kernel.require(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at JRuby::Rack::Booter.boot!(file:/Users/jwang392/hello-world/WEB-INF/ lib/jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at (unknown).(unknown)(file:/Users/jwang392/Dhello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at Kernel.load(<script>:1) at (unknown).(unknown)(:1) Apr 8, 2010 7:17:05 PM com.google.appengine.tools.development.ApiProxyLocalImpl log SEVERE: [1270754225913000] javax.servlet.ServletContext log: unable to create shared application instance org.jruby.rack.RackInitializationException: no such file to load -- time from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25:in `boot!' from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10 from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1:in `load' from <script>:1 at org.jruby.rack.DefaultRackApplicationFactory $4.init(DefaultRackApplicationFactory.java:169) at org.jruby.rack.DefaultRackApplicationFactory.getApplication(DefaultRackAppl icationFactory.java: 51) at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 27) at org.jruby.rack.RackServletContextListener.contextInitialized(RackServletCon textListener.java: 40) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java: 530) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java: 1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java: 448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.jetty.Server.doStart(Server.java:217) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at com.google.appengine.tools.development.JettyContainerService.startContainer (JettyContainerService.java: 188) at com.google.appengine.tools.development.AbstractContainerService.startup(Abs tractContainerService.java: 147) at com.google.appengine.tools.development.DevAppServerImpl.start(DevAppServerI mpl.java: 219) at com.google.appengine.tools.development.DevAppServerMain $StartAction.apply(DevAppServerMain.java:162) at com.google.appengine.tools.util.Parser $ParseResult.applyArgs(Parser.java:48) at com.google.appengine.tools.development.DevAppServerMain.<init>(DevAppServer Main.java: 113) at com.google.appengine.tools.development.DevAppServerMain.main(DevAppServerMa in.java: 89) Caused by: org.jruby.exceptions.RaiseException: no such file to load -- time at (unknown).new(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at Kernel.require(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at JRuby::Rack::Booter.boot!(file:/Users/jwang392/hello-world/WEB-INF/ lib/jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at Kernel.load(<script>:1) at (unknown).(unknown)(:1) Apr 8, 2010 7:17:05 PM com.google.appengine.tools.development.ApiProxyLocalImpl log SEVERE: [1270754225915000] javax.servlet.ServletContext log: Error: application initialization failed org.jruby.rack.RackInitializationException: unable to create shared application instance at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 39) at org.jruby.rack.RackServletContextListener.contextInitialized(RackServletCon textListener.java: 40) at org.mortbay.jetty.handler.ContextHandler.startContext(ContextHandler.java: 530) at org.mortbay.jetty.servlet.Context.startContext(Context.java:135) at org.mortbay.jetty.webapp.WebAppContext.startContext(WebAppContext.java: 1218) at org.mortbay.jetty.handler.ContextHandler.doStart(ContextHandler.java: 500) at org.mortbay.jetty.webapp.WebAppContext.doStart(WebAppContext.java: 448) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at org.mortbay.jetty.handler.HandlerWrapper.doStart(HandlerWrapper.java: 117) at org.mortbay.jetty.Server.doStart(Server.java:217) at org.mortbay.component.AbstractLifeCycle.start(AbstractLifeCycle.java: 40) at com.google.appengine.tools.development.JettyContainerService.startContainer (JettyContainerService.java: 188) at com.google.appengine.tools.development.AbstractContainerService.startup(Abs tractContainerService.java: 147) at com.google.appengine.tools.development.DevAppServerImpl.start(DevAppServerI mpl.java: 219) at com.google.appengine.tools.development.DevAppServerMain $StartAction.apply(DevAppServerMain.java:162) at com.google.appengine.tools.util.Parser $ParseResult.applyArgs(Parser.java:48) at com.google.appengine.tools.development.DevAppServerMain.<init>(DevAppServer Main.java: 113) at com.google.appengine.tools.development.DevAppServerMain.main(DevAppServerMa in.java: 89) Caused by: org.jruby.rack.RackInitializationException: no such file to load -- time from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25:in `boot!' from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10 from file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1:in `load' from <script>:1 at org.jruby.rack.DefaultRackApplicationFactory $4.init(DefaultRackApplicationFactory.java:169) at org.jruby.rack.DefaultRackApplicationFactory.getApplication(DefaultRackAppl icationFactory.java: 51) at org.jruby.rack.SharedRackApplicationFactory.init(SharedRackApplicationFacto ry.java: 27) ... 19 more Caused by: org.jruby.exceptions.RaiseException: no such file to load -- time at (unknown).new(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at Kernel.require(file:/Users/jwang392/hello-world/WEB-INF/lib/jruby- rack-0.9.6.jar!/jruby/rack/booter.rb:25) at JRuby::Rack::Booter.boot!(file:/Users/jwang392/hello-world/WEB-INF/ lib/jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:10) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at (unknown).(unknown)(file:/Users/jwang392/hello-world/WEB-INF/lib/ jruby-rack-0.9.6.jar!/jruby/rack/boot/rack.rb:1) at Kernel.load(<script>:1) at (unknown).(unknown)(:1) The server is running at http://localhost:8080/ I'm at a loss at what step I may have missed. I checked my ruby version (1.8.7) and rails version (2.3.5), gem version (1.3.6) and google-appengine-0.0.10.1 ran: sudo gem install google-appengine curl -O http://appengine-jruby.googlecode.com/hg/demos/rails2/rails2_appengine.rb ruby rails2_appengine.rb sudo gem install rails_dm_datastore sudo gem install activerecord-nulldb-adapter put this in my config.ru file: run lambda { |env| Rack::Response.new('Hello World!').finish } and finally ran $ dev_appserver.rb .

  Read the article

• How can I do Ubuntu Lucid Desktop installation with HTTP preseed?

  - by netvope

  Installation media: ubuntu-10.04-desktop-i386.iso I tried a lot of different boot parameters, but either the installer ignored the preseed configuration, or it boot itself directly as LiveCD. An example of the boot parameters I've tried: auto url=http://mydomain.com/path/preseed.cfg boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash -- If I remove only-ubiquity, it boots as a LiveCD. If I remove boot=casper, it won't boot. If I add vga=normal locale=en_US console-setup/layoutcode=us console-setup/ask_detect=false interface=auto, it still can't do automatic install. If I remove auto, it's the same. What is the correct boot parameters for launching such an installation? From the apache log of the server hosting preseed.cfg, I see that the installer has no problems fetching the preseed file. My preseed file is almost identical to the one at https://help.ubuntu.com/10.04/installation-guide/example-preseed.txt. Moreover, I have run debconf-set-selections -c preseed.cfg to ensure that the preseed file is correct.

  Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >