Search Results

Search found 7447 results on 298 pages for 'estrategia hardware'.

Page 199/298 | < Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >

• RAID setup for maximizing data retention and read speed

  - by cat pants

  My goals are simple: maximize data retention safety, and maximize read speeds. My first instinct is to do a a three drive software RAID 1. I have only used fakeraid RAID 1 in the past and it was terrible (would have led to data loss actually if it weren't for backups) Would you say software raid 1 or a cheap actual hardware raid card? OS will be linux. Could I start with a two drive raid 1 and add a third drive on the fly? Can I hot swap? Can I pull one of the drives and throw it into a new machine and be able to read all the data? I do not want a situation where I have a raid card fail and have to try and find the same chipset in order to read my data (which i am assuming can happen) Please clarify any points on which it sounds like I have no idea what I am talking about, as I am admittedly inexperienced here. (My hardest lesson was fakeraid lol) Thanks!

  Read the article

• Extremely poor WiFi reception on new desktop

  - by guy

  I just received a new desktop with a built-in WiFi card (Windows 7 Home Premium x64). However, I am only able to receive any WiFi signal when the computer is within 1-2 meters of a router. Even then, the signal is very weak (Windows 7 says it is "poor"). I have tried this with 2 different routers and see similar results. I have somewhere around a dozen other devices that can connect to both routers with greater signal strength (usually full strength) from much, much further away. When I tried calling support I was instructed to reinstall my drivers and attempt to change the WiFi channel of the router. Neither worked. I was then told that the problem was with my routers and that the computer was functioning normally and that it was certainly not a hardware problem. What would be the cause of this and is there anything I can do to fix it?

  Read the article

• Why Windows Media Center (Vista 32-bit) unable to record TV Series?

  - by Alex R

  I can record individual shows just fine, but trying to setup the recording of a Series throws an error (something like, "unable to schedule, try restarting Media Center", pops up in the bottom right of the screen). Trying to access the "Other Showings" menu causes Media Center to crash ("check for a solution online" dialog comes up). The machine is a fresh reinstall of 32-bit Windows Vista from the HP recovery CDs, plus all Microsoft updates and service packs. Hardware: HP s3220n, AMD X2 5000+, 2GB RAM, 300GB free space on disk. Media Center came bundled. The "Media Center update for Vista" failed to install (it says, not appropriate for my computer). Any ideas? Thanks

  Read the article

• Monitor has yellow tint when used with the graphics card

  - by artknish

  I have an nVIDIA graphics card when used produces an yellow tint on my monitor's display. I tried with another monitor and it had the same issue. I then switched back to my motherboard's inbuilt graphics output (not sure what the technical term is), and the display seems fine, except I can't get the optimal resolution of 1440x900 to work. So is my graphics card's life over? Or can I get it repaired? Any self remedies without calling a hardware guy? Should I try with a DVI cable? I've been using the VGA cable from my graphics card to the monitor so far. Thanks for your suggestions!

  Read the article

• Can I use dis-similar HW for Win2008r2 DFS-R

  - by cwheeler33

  The setup: Windows 2008R2 Ent on two machines. The roles on each server will include File Servers and DC's. The machines come from two different vendors (Dell/HP) The Dell is an Athlon and the HP is an Intel. Both have roughly the same speed CPU and 8GB of RAM. They have different Raid controllers, and more or less the same amount of disk space (roughly 6TB.) Can the servers use different types of hardware? Is there any documentation about this? The last question I have is about the network. Can DFS-R be forced to use a differen subnet from the regular network?

  Read the article

• Windows 7 automatically install usb driver

  - by Dan

  I have tried to install usb driver for Samsung arndale on Windows 7. Now it has two entries in Device Manager. I can not uninstall the one with question mark. If I uninstall both of them, when I plug in the hardware, Windows 7 will automatically install both of the entries when the circuit pulg in. I don't get the chance to choose the right driver. When I try to update the wrong driver, it says found the driver but can not install it.

  Read the article

• Portable Display doesn't work anymore

  - by RipCord

  My USB portable monitor will not work since I installed the hard drive onto an HP laptop. I have installed all the new hardware drivers and do not have any more device issues in device manager view. My old laptop was a lenovo. The new one is an HP. The system seems to recognize devices that I connect via, usb but the portable display still does not show anything on the screen. It is probably a conflict in the registry but I'm not sure how to find it and the Power User does not have the luxury of letting me troubleshoot for hours to isolate the problem.

  Read the article

• Using VMware's ESXi, can I plug in 30 USB Wireless adapters and allow each of 30 VMs one?

  - by 31eee384

  I'm assuming ESXi will act very similarly to VMware Workstation or other products, so answers based on knowledge of those programs might also help. I want to plug in 30 USB Wireless or Ethernet adapters into my server, and let each VM access one and only one of these devices. Unfortunately, I don't have the hardware to just try it out as the purchase of hubs and adapters hinges on the result of this question. The answer could be a resounding "yes, easy!" and that would be great. I couldn't find any answers to this question with google, and it's possible that this is because it's so easy to do.

  Read the article

• Would there be any problems with DEP turned off?

  - by IneedHelp

  I recently moved to a fresh Windows 8 x64 system and I learned that my favourite firewall (JPF - Jetico Personal Firewall) doesn't get along with Win8x64 (CRITICAL_STRUCTURE_CORRUPTION errors), but I can not do without JPF, so I kind of tried everything I could think of (test mode, debugging, various system changes), but I was still getting blue screens because of the firewall driver/software. I know for sure that it is the firewall that is causing the problems because I get blue screens as soon as I install it and they stop when I uninstall it. I Also tested it thoroughly on virtual computers. Anyway, I have discovered that by completely turning DEP off by using this command: bcdedit.exe /set {current} nx AlwaysOff the firewall would not cause blue screens anymore. So my question is, what could go wrong with DEP completely turned off? Note: I do not care much about hardware/windows security, I keep myself secured by using sandboxes and virtual computers (and I also have backups), so I'm not concerned with viruses and root kits or whatever people are freaking out about.

  Read the article

• SNMP - So I have a MIB. Now What?

  - by senfo

  I can't seem to get my head wrapped around the purpose of a MIB. I have a collection of ~20 MIB files that were supplied to me by the vendor, but what do I do with them? I also have a few OID's that were supplied by the vendor that don't seem to be valid. When I issue an "snmpget -v1 -c public 192.168.0.123 .1.4.6.3.2.6.2" (assume that's a valid OID), I get an error indicating the variable is unknown. Does this sound like a hardware configuration problem? Do I need to "load" (for lack of better words) the MIB into the device? Unfortunately, the vendor has been completely unresponsive with returning emails to my questions, so any help would be greatly appreciated.

  Read the article

• memtest86+ crashing on server

  - by user148723

  we have a few DELL 1950 servers. 1 of this servers has CentOS6.3 and its randomly rebooting so I suspected it was hardware. (no log generated) the other 4 servers do not randomly reboot. We passed memtest86+ on the 5 servers, and on 3 of them memtest86+ crashes (displaying an odd and colorful screen, like if a video card failed) Although I tested old memtest86 (not +), and all servers did not crash. I also tested other RAM testers utilities, no tool failing. have any of you guys experience this? thanks

  Read the article

• Extend university wifi network

  - by asfasdoiuh ouhouhouh

  i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want?

  Read the article

• Can't unlock locked screen, in Ubuntu 12

  - by Camille Goudeseune

  After locking the screen (with a keystroke bound to xlock -nice 8 -mode blank), I can unlock the screen as expected, but only within a few minutes. After being locked overnight, when I hit a key (even Ctrl+Alt combos), the screen stays black with just a brief white flash across the middle of both monitors. The workaround is to ssh in from another host and restart X. Some months ago, this happened every few weeks. By now it happens almost every morning. How do I even start to diagnose this? What might I look for in log files? (The intermittency is particularly troubling.) Failing that, is there an alternative to xlock aka xlockmore? Hardware: 3-year-old HP minitower, GEForce 9800 GT, two Asus LCD monitors. Software: Ubuntu 12.04.2 LTS. Window manager awesome-wm. NVidia driver 304.88. XLock version xlockmore-5.31.

  Read the article

• Running RAID on an internal storage drive

  - by Johnny W

  I am running Windows 8 on an SSD, and it's all running swimmingly, but I want to put my documents on a "normal" HD running under RAID 1. I have four SATA 3GB/s ports on my motherboard (my Windows 8 SSD drive in on a different 6GB/s controller). All four are used (1 Bluray Optical Drive, 1 Spare HD, and the 2 I wish to turn into a RAID 1 drive. In my BIOS I can only change settings for the entire controller, not just ports. So my question is: If I turn these four ports into a RAID controller, will that negatively affect the non-RAID hardware plugged into it? I.e. Will a HD or Bluray drive be slower/incompatible with being plugged into a non AHCI SATA port? Thanks.

  Read the article

• Options to Reformat USB Drive

  - by user8783

  I have a 64GB usb thumb drive. When I plug it into a Windows system (I have tried several machines with both Windows 7 and 8), the system attempts to read it and never completes. The drive does not show up in the device manager, nor does it appear in Computer Management - Disk Management. If I click on the "Safely Remove Hardware" icon, however, I do get an option for "Eject Mass Storage Media", although it never accomplishes anything. Also, as long as the USB drive is connected, I cannot access other USB drives or even restart my computer. It seems as though it locks up Windows Explorer. Is there any option to reformat this drive? It was a great drive up until all this craziness began and I would hate to throw it out because it was rather pricey.

  Read the article

• Can a RAID 4 disk setup crash if only 1 hard disk fails?

  - by Steve Rodrigue

  I am a web developer. I have not much experience in hardware. For this reason, I use managed servers. This morning, one of the drives in our setup failed. However, the full site went down. I asked my web host what happened and he replied that the hard disk failed in such a way that the RAID controller couldn't work properly. The array was set up as RAID 4. Do you guys ever seen that before? Is it possible? Thanks for any help on this guys. I need to know if my web host is honest with me.

  Read the article

• How to put fear of God (law) into Wi-Fi hacking neighbors [closed]

  - by Shakehar

  I live in an apartment and some new guys have apparently moved into one of the apartments. They have been shamelessly hacking into my WiFi. Mine was initially a WEP encrypted network and out of laziness I just limited and reserved the IPS on my router for the people in my house. Yesterday I had to free up an IP for a guest in my house but before he could join the network these guys connected in. I have changed my encryption to WPA2 and hope they dont have the hardware/patience required to hack into it, but there are many wi-fi networks in my apartment most of which are secured using WEP. I don't really want to call the police on them. Is there any way to deter them from misusing other people's wi-fi ? I have gone through I think someone else has access to my wireless network. What next? but I have already taken the steps mentioned there.

  Read the article

• VMware Workstation 7&8&9 does not generate /etc/vmware/network upon installation

  - by dash17291

  When I install VMware Workstation on Arch linux Virtual ethernet is not working. $ sudo tail /var/log/vnetlib Aug 28 22:20:33 VNLFileExists - Cannot check for file or directory: /etc/vmware/networking , error: No such file or directory Aug 28 22:20:33 VNLNetCfgLoad - Import file does not exist Aug 28 22:20:33 VNL_Load - Error loading the vnet configuration, file used: /etc/vmware/networking Aug 28 22:20:33 VNLNetCfgUnload - Requested cache is not loaded Database file is not present. Failed to initialize Aug 28 22:20:41 VNLFileExists - Cannot check for file or directory: /etc/vmware/networking , error: No such file or directory Aug 28 22:20:41 VNLNetCfgLoad - Import file does not exist Aug 28 22:20:41 VNL_Load - Error loading the vnet configuration, file used: /etc/vmware/networking Aug 28 22:20:41 VNLNetCfgUnload - Requested cache is not loaded Required modules compiled. Previously I have copied that file or directory (I don't remember) from a working installation, but now I need a real solution. It's strange for me, may be a hardware issue also because with Ubuntu the same thing happens on the same computer.

  Read the article

• Do you think Microsoft is finally on the right track with its Windows 7?

  - by Saif Bechan

  It has been a while now since Windows 7 has been released. So far I didn't hear of many major complaints about it. I can remember the time that Windows Vista hist the shelves. There were major complaints from both experts and just regular users. I do a lot of OS installs for just regular users. These are mostly family and friends, and sometimes there are some customers. Up till now I mostly still use Windows XP SP3, because it is stable and most people are familiar with it. I did Vista for some users but they always call me back with all sorts of questions and in the end I had to downgrade them to XP. Do you think it is safe now to recommend Windows 7 as a good operating system? Offcourse their hardware has to support it, but let's say that is the case. If you install Windows 7 a lot for people, what are the complaints about if you get them?

  Read the article

• Raspberry Pi based Hadoop cluster

  - by Dmitriy Sukharev

  Is it at least possible to build Hadoop cluster from Raspberry Pi-based nodes? Can such a cluster meet hardware requirements of Hadoop? And if so, how much Raspberry Pi nodes are required to meet requirements? I understand that a cluster from several Raspberry Pi nodes being cheap is not powerful. My purpose is to organize cluster without possibility of loosing personal data from my desktop or notebook, and to use this cluster studying Hadoop. I'd appreciate if you suggest any better ideas of organizing a cheap Hadoop cluster for studying purposes. UPD: I've seen that recommended amount of memory for Hadoop is 16-24GB, multi-core processors, and 1TB of HDD, but it doesn't look like minimal requirements.

  Read the article

• Any recommendations on a NAS for a home-super-user?

  - by marc_s

  Can anyone recommend a good NAS for use in a home-server environment? I would request at least 2, preferably 4 disks, and I am most interested in good to excellent throughput for file-server and backup purposes - don't need any of the fancy media-streaming or -sharing features, that's not of interest to me. For a 4 or more disk solution, support for the various RAID levels (0, 1, 1+0, 5) would be a plus - especially if supported in hardware (rather than just a software emulation). I just need a place to put my collection of data, ISO images, and so forth - and since several external disks (self-built and off-the-shelf) have failed so far, I'm looking into a more reliable solution. Marc

  Read the article

• How can I increase the size of the hard disk used by my Virtual Machine Manager (VMM) vm?

  - by Scott Langham

  In Virtual Machine Manager admin console, I used the 'New virtual machine' wizard and created a machine from an existing template. When I got to the Configure Hardware step, I selected the primary hard disk (which is a dynamic) disk and tried to increase it's maximum size, but this control is disabled so I can't increase it. It's not big enough for my purposes. how do I increase the maximum size of the hard-disk? Thanks. Edit: I am able to add a second hard disk of a size I specify. That's not useful though as I'm trying to install some software, some of which insists on being on drive C.

  Read the article

• DNS Pointer to old server name

  - by TechKnow Dude

  We have a SBS2003 server that was migrated to a new hardware platform, the computer name has changed but the domain is the same. The desktop's are trying to do offline files to the old server name. There is a nslookup entry for the old server name and a DNS entry for the old server. How do we safely remove the old DNS entry without breaking the computer offline folder storage locally. Can we change the pointing location on the offline file storage to point to the new server name.

  Read the article

• Installing Windows on multiple computers

  - by Rob

  At our work we've decided to buy SSDs to speed up our computers. We'd also like to upgrade from Windows 7 to Windows 8.1 (read clean install) I'm talking about 10 computers which going to have a fully clean installation. Is there any trick I can use to avoid installing Windows 10 times? The computers (most of them) are different in hardware, so I think duping is no good option. What can I do? I'd like to spend as less time as possible because all computers are going to need SQL Management Studio and Visual Studio 2012/2013. Thanks!

  Read the article

• DH61AG's mythical 2 pin 19v power socket and is too low of votage bad?

  - by Nick Orton

  I have an intel dh61ag motherboard. It has an external 19v power adapter. It also has a 1x2 pin 19VDC internal power connector. Now I cannot find a psu or adapter or anything that will plug into this. In an intel forum, one person said that he plugged half of a 2x2 psu connector in and it worked. Since this would deliver 12v into a socket that asks for 19v, I suspect that this is a bad idea. I don't know much about hardware. Can anyone explain to me why this would be a bad idea?

  Read the article

< Previous Page | 195 196 197 198 199 200 201 202 203 204 205 206  | Next Page >