Search Results

Search found 717 results on 29 pages for 'ac'.

Page 2/29 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • HP 20gig iPod stuck on "AC Charge" icon

    - by Chris
    I have a HP edition iPod (20gig) and it is stuck on the "AC Charge" icon with the picture of the wall charger and an outlet. I tried to reset the device and it has been stuck on this icon for quite a while now. I have tried everything I can to try to reset it, and before I stoop to visiting an Apple store I want to see if anyone has any tricks up their sleeves. This is what the icon looks like:

    Read the article

  • How to rebuild openssh 5.2p1 after changing configure.ac

    - by Arthur Ulfeldt
    I needed to add AM_PATH_CHECK to configure.am I then try to run the usual sequence of autotools commands to rebuild all the makefiles and whatnot: aclocal automake -ac autoheader autoreconf ./configure make and here my lack of understanding of autotools showes up because this release of openssh has no Makefile.am??? now what do I do? if i try to ignore this and build anyway configure dies with this lovely error: checking whether OpenSSL's PRNG is internally seeded... yes ./configure: line 18275: syntax error near unexpected token `PROG_LS,' ./configure: line 18275: `OSSH_PATH_ENTROPY_PROG(PROG_LS, ls)' caused by this line in configure.ac: OSSH_PATH_ENTROPY_PROG(PROG_LS, ls) Is this actually caused by my changes to configure.ac? what can I do to regenerate the required files to allow configure to work? if i take my changes out and dont run aclocal then it works???

    Read the article

  • Check result of AX_PYTHON_MODULE in configure.ac

    - by tmatth
    In using the m4_ax_python_module.m4 macro in configure.ac (AX_PYTHON_MODULE), one can know at configure time if a given module is installed. It takes two arguments, the module name, and second argument which if not empty, will lead to an exit, useful when the module is a must-have. In the case where you don't want a fatal exit, how do you test in configure.ac which modules were found or not? They output "yes" or "no" when configure is run, but that's all I've found so far. Basically If I have these lines in configure.ac: AX_PYTHON_MODULE(json,[]) AX_PYTHON_MODULE(simplejson,[]) How do I test which of the two modules were found? See http://www.gnu.org/software/autoconf-archive/ax_python_module.html#ax_python_module for documentation about this macro.

    Read the article

  • What IDE to use for Python

    - by husayt
    As a Python newbie, it is interesting to know what IDE's ("GUIs/editors") others use for Python coding. If you can just give the name (e.g. Textpad, Eclipse ..) that will be enough. If it is already mentioned, you can just vote for it. But if you can also give some more comparative information, that will be much appreciated. Thanks. Update: Results so far PyDev with Eclipse (CP, F, AC, PD, EM, SI, MLS, UML, SC, UT, LN, CF, BM) Komodo (CP, C/F, MLS, PD, AC, SC, SI, BM, LN, CF, CT) Emacs (CP, F, AC, MLS, PD, EM, SC, SI, BM, LN, CF, CT, UT, UML) Vim (CP, F, AC, MLS, SI, BM, LN, CF ) TextMate (Mac, CT, CF, MLS, SI, BM, LN) Gedit (Linux, F, AC, MLS, BM, LN, CT [sort of]) Idle (CP, F, AC) PIDA (Linux, CP, F, AC, MLS, SI, BM, LN, CF)(VIM Based) NotePad++ (Windows) BlueFish (Linux) JEdit (CP, F, BM, LN, CF, MLS) E-Texteditor (TextMate Clone for Windows) WingIde (CP, C, AC, MLS (support for C), PD, EM, SC, SI, BM, LN, CF, CT, UT) Eric Ide (CP, F, AC, PD, EM, SI, LN, CF, UT) Pyscripter (Windows, F, AC, PD, EM, SI, LN, CT, UT) ConTEXT (Windows, C) SPE (F, AC, UML) SciTE (CP, F, MLS, EM, BM, LN, CF, CT, SH) Zeus (W, C, BM, LN, CF, SI, SC, CT) NetBeans (CP, F, PD, UML, AC, MLS, SC, SI, BM, LN, CF, CT, UT, RAD) DABO (CP) BlackAdder (C, CP, CF, SI) PythonWin (W, F, AC, PD, SI, BM, CF) Geany (CP, F, very limited AC, MLS, SI, BM, LN, CF) UliPad (CP, F, AC, PD, MLS, SI, LI, CT, UT, BM) Boa Constructor (CP, F, AC, PD, EM, SI, BM, LN, UML, CF, CT) ScriptDev (W, C, AC, MLS, PD, EM, SI, BM, LN, CF, CT) Spider (CP, F, AC) Editra (CP, F, AC, MLS, SC, SI, BM, LN, CF) Pfaide (Windows, C, AC, MLS, SI, BM, LN, CF, CT) KDevelop (CP, F, MLS, SC, SI, BM, LN, CF) Acronyms used: CP - Cross Platfom C - Commercial F - Free AC - Automatic Code-completion MLS - Multi-Language Support PD - Integrated Python Debugging EM - ErrorMarkup SC - Source Control integration SI - Smart Indent BM - Bracket Matching LN - Line Numbering UML - UML editing / viewing CF - Code Folding CT - Code Templates UT - Unit Testing UID - Gui Designer (e.g. QT, Eric, ..) DB - integrated database support RAD - Rapid app development support I don't mention basics like Syntax highlighting as I expect these by default. This is a just dry list reflecting your feedback and comments, I am not advocating any of these tools. I will keep updating this list as you keep posting your answers. PS. Can you help me to add features of the above editors to the list (like autocomplete, debugging, or etc)?

    Read the article

  • Dell Latitude D510 Runs From Battery But Not AC Adapter

    - by Jason George
    I have a Dell Latitude D510 that went belly up around two years ago. It will run from the battery, however, the wall adapter will neither power the machine nor charge the battery. Once the battery is dead, the machine is dead. Since it died I've searched repeatedly for solutions. I've tried a new AC adapter and even removed and replaced the DC jack thinking one of the solder joints might be bad. Both to no avail. After two years of searching I finally found the answer today. Since it's such a simple fix and I had such a hard time finding it I wanted to post the info for others (as it is apparently a common issue with the D510). -----SOLUTION----- It seems this is commonly caused by a cracked solder joint at pin 1 on an inductor filter pair (FL2) near the power jack. Pins 1 and 4 are ground and pins 2 and 3 are power. There should be 20V from 1 to 2 and 3. Anything less indicates a cracked joint that is increasing resistance and dropping the supply voltage. Repair simply requires reflowing all four pins with a little added solder for security. Detailed instructions can be found here. Dell Latitude D510 solder problem

    Read the article

  • Odd Language In a BIOS Message

    - by Josh
    So I started up my laptop today and was greeted with the following message (not a direct quote): The type of the AC adapter cannot be determined. This may interfere with your computer's performance. Try unplugging the AC adapter and then plugging it back in, thanks. The problem was that I hadn't fully secured the plug into the back of the computer. However, I was a little taken aback when a message from BIOS said, "thanks." Is this normal? Any chance the message was illegitimate (virus)?

    Read the article

  • Realtek audio AC 97 5.1 on Windows 7: Terrible subwoofer quality

    - by Edu
    I have a media center PC with on-board Realtek AC97 Audio. I have been using Windows XP for a couple of years with great audio quality. I just upgraded this PC with Windows 7 and installed the latest Realtek drivers from http://www.realtek.com.tw/downloads/ At the testing screen, all the speakers works correctly (including subwoofer). Despite that, while playing any movie or music, the subwoofer quality is terrible. From it it just comes noises, in the correct rhythm but quite low and quite out of tone. I compensated the loudness by putting the other speakers lower but the sound of the subwoofer is really terrible. Is there anyone facing the same problem? Does anyone have a workaround for that? PS.: I had gone past the steps given in Terrible noises from subwoofer of ACER Aspire 6930 with Realtek sound chip but still I have a bad quality of sound. My problem is very similar to the one in http://www.mp3car.com/car-audio/143796-realtek-hd-audio-is-robbing-my-subwoofer.html

    Read the article

  • validate a .edu or .ac email address

    - by Rees
    Hello, I'm a noob but trying vigorously to simply validate email addresses that only end in ".edu" or ".ac" is there a simple function/script/solution to this seemingly simple problem? able to use php,javascript or jquery. Any help would be great thanks in advance!

    Read the article

  • alert(line) alerts 'ac' and typeof(line) is 'string', but charAt is not a function

    - by Delirium tremens
    alert(line) alerts 'ac' typeof(line) is 'string' When I run line.charAt(0), charAt is not a function. When line is 'http://www.google.com/', it works, I think it's the UTF-8 encoding of the file that I opened... How to make charAt work with UTF-8? UPDATED: http://mxr.mozilla.org/mozilla-central/source/netwerk/dns/src/effective_tld_names.dat?raw=1 is in my extension's chrome folder as effective_tld_names.dat To run the code: authority = 'orkut.com.br'; lines = sc_geteffectivetldnames(); lines = sc_preparetouse(lines); domainname = sc_extractdomainname(authority, lines); The code: function sc_geteffectivetldnames () { var MY_ID = "[email protected]"; var em = Components.classes["@mozilla.org/extensions/manager;1"]. getService(Components.interfaces.nsIExtensionManager); var file = em.getInstallLocation(MY_ID).getItemFile(MY_ID, "chrome/effective_tld_names.dat"); var istream = Components.classes["@mozilla.org/network/file-input-stream;1"]. createInstance(Components.interfaces.nsIFileInputStream); istream.init(file, 0x01, 0444, 0); istream.QueryInterface(Components.interfaces.nsILineInputStream); var line = {}, lines = [], hasmore; do { hasmore = istream.readLine(line); lines.push(line.value); } while(hasmore); istream.close(); return lines; } function sc_preparetouse(lines) { lines = sc_notcomment(lines); lines = sc_notempty(lines); return lines; } function sc_notcomment(lines) { var line; var commentre; var matchedcomment; var replacedlines; replacedlines = new Array(); var i = 0; while (i < lines.length) { line = lines[i]; commentre = new RegExp("^//", 'i'); matchedcomment = line.match(commentre); if(matchedcomment) { lines.splice(i, 1); } else { i++; } } return lines; } function sc_notempty(lines) { var line; var emptyre; var matchedempty; var replacedlines; replacedlines = new Array(); var i = 0; while (i < lines.length) { line = lines[i]; emptyre = new RegExp("^$", 'i'); matchedempty = line.match(emptyre); if(matchedempty) { lines.splice(i, 1); } else { i++; } } return lines; } function sc_extractdomainname(authority, lines) { for (var i = 0; i < lines.length; i++) { line = lines[i]; alert(line); alert(typeof(line)); if (line.chatAt(0) == '*') { alert('test1'); continue; } if (line.chatAt(0) == '!') { alert('test2'); line.chatAt(0) = ''; } alert('test3'); checkline = sc_checknotasteriskline(authority, line); if (checkline) { domainname = checkline; } } if (!domainname) { for (var i = 0; i < lines.length; i++) { line = lines[i]; alert(line); if (line.chatAt(0) != '*') { continue; alert('test4'); } if (line.chatAt(0) == '!') { line.chatAt(0) = ''; alert('test5'); } alert('test6'); checkline = sc_checkasteriskline(authority, line); if (checkline) { domainname = checkline; } } } return domainname; } It alerts 'ac', then 'string', then nothing.

    Read the article

  • alert(line) alerts 'ac' and typeof(line) is 'string', but charAt is not a function

    - by Delirium tremens
    alert(line) alerts 'ac' typeof(line) is 'string' When I run line.charAt(0), charAt is not a function. When line is 'http://www.google.com/', it works, I think it's the UTF-8 encoding of the file that I opened... How to make charAt work with UTF-8? UPDATED: http://mxr.mozilla.org/mozilla-central/source/netwerk/dns/src/effective_tld_names.dat?raw=1 is in my extension's chrome folder as effective_tld_names.dat To run the code: authority = 'orkut.com.br'; lines = sc_geteffectivetldnames(); lines = sc_preparetouse(lines); domainname = sc_extractdomainname(authority, lines); The code: function sc_geteffectivetldnames () { var MY_ID = "[email protected]"; var em = Components.classes["@mozilla.org/extensions/manager;1"]. getService(Components.interfaces.nsIExtensionManager); var file = em.getInstallLocation(MY_ID).getItemFile(MY_ID, "chrome/effective_tld_names.dat"); var istream = Components.classes["@mozilla.org/network/file-input-stream;1"]. createInstance(Components.interfaces.nsIFileInputStream); istream.init(file, 0x01, 0444, 0); istream.QueryInterface(Components.interfaces.nsILineInputStream); var line = {}, lines = [], hasmore; do { hasmore = istream.readLine(line); lines.push(line.value); } while(hasmore); istream.close(); return lines; } function sc_preparetouse(lines) { lines = sc_notcomment(lines); lines = sc_notempty(lines); return lines; } function sc_notcomment(lines) { var line; var commentre; var matchedcomment; var replacedlines; replacedlines = new Array(); var i = 0; while (i < lines.length) { line = lines[i]; commentre = new RegExp("^//", 'i'); matchedcomment = line.match(commentre); if(matchedcomment) { lines.splice(i, 1); } else { i++; } } return lines; } function sc_notempty(lines) { var line; var emptyre; var matchedempty; var replacedlines; replacedlines = new Array(); var i = 0; while (i < lines.length) { line = lines[i]; emptyre = new RegExp("^$", 'i'); matchedempty = line.match(emptyre); if(matchedempty) { lines.splice(i, 1); } else { i++; } } return lines; } function sc_extractdomainname(authority, lines) { for (var i = 0; i < lines.length; i++) { line = lines[i]; alert(line); alert(typeof(line)); if (line.chatAt(0) == '*') { alert('test1'); continue; } if (line.chatAt(0) == '!') { alert('test2'); line.chatAt(0) = ''; } alert('test3'); checkline = sc_checknotasteriskline(authority, line); if (checkline) { domainname = checkline; } } if (!domainname) { for (var i = 0; i < lines.length; i++) { line = lines[i]; alert(line); if (line.chatAt(0) != '*') { alert('test4'); continue; } if (line.chatAt(0) == '!') { alert('test5'); line.chatAt(0) = ''; } alert('test6'); checkline = sc_checkasteriskline(authority, line); if (checkline) { domainname = checkline; } } } return domainname; } It alerts 'ac', then 'string', then nothing.

    Read the article

  • Ubuntu makes noise and heat when AC charger is inserted

    - by user2263752
    I have an issue with heat and noise on my laptop with Ubuntu 14.04 installed. The thing is that when I have the AC charger plugged into the laptop, it automatically goes to "boost mode" or something. And when the laptop is on battery mode, the heat and noise is reduced shortly. I want the laptop to be on battery mode as general and "boost mode" as an option if more power is needed. Any solutions? I have installed tlp that doesn't seen to have any effect.

    Read the article

  • Laptop accessories for mobile warrior (light power adapter & case/bag)

    - by wonsungi
    Lugging my X301 between work and home, I realized my laptop's accessories weigh more than the laptop itself! I'm ordering a 2nd AC power adapter so I don't even have to carry one at all, but I may as well get the lightest one possible. My X301 came with a pretty svelt 65W power adapter, but can anyone suggest a lighter power adapter or confirm the weights I've found below? mass vol dimensions W Model ---- ------- ----------- --- ------------------- 210g 149cm^3 108x46x30mm 65W Coolermaster [NA 65] 244g 189cm^3 140x75x18mm 65W ThermalTake [ADP65W0001] 260g 130cm^3 104x43x29mm 65W Lenovo (came with X301) 326g 198cm^3 145x76x18mm 95W Coolermaster [SNA 95] 330g 180cm^3 150x60x20mm 90W Kensington USB [K38030US] Apple's 60W power adapter seems much smaller/lighter than the PC products listed above, so I think a better PC power adapter could exist. There are much smaller 45W "netbook" adapters, but are these too weak for my X301? I would not mind if it just meant the battery couldn't charge while the laptop was on, but I am afraid there will be worse consequences. Also, I have decided to swap my Logitech Kinetik briefcase for a Tom Bihn Ristretto. Less protection, but much lighter, less bulky, and easier to carry. Any suggestions for better laptop cases/bags?

    Read the article

  • Laptop does not charge old or new battery with Old and New AC adapters.

    - by Jeff
    My Sager computer has been having a strange issue with the charging. For a long time it would be working perfectly as long as I was active on it. After I'd leave idle for a while it would suddenly decide it didn't want to use AC power anymore and would just discharge the battery until it shutdown because of low battery levels. Was not a huge deal to me since I just sent it to standby when done with it and it worked fine. Recently, however, it would not detect AC power while the battery was in. It ran from the battery just fine but until you powered it down, unplugged the battery, then plugged in the AC adapter it would not be on AC. In addition if I plug the battery back in after it's on AC power, it will see it but the battery won't charge though it can still discharge it. This is OS independent. I tried both a replacement battery and a replacement AC adapter. Neither solved my issue. I'm fairly comfortable opening and servicing a laptop but I don't know where to start. I'd like to avoid replacing my system board if possible. Any Ideas?

    Read the article

  • Given a Member Access lambda expression, convert it to a specific string representation with full ac

    - by Nathan
    Given an Expression<Func<T, object>> (e.g. x = x.Prop1.SubProp), I want to create a string "Prop1.SubProp" for as deep as necessary. In the case of a single access (e.g. x = x.Prop1), I can easily do this with: MemberExpression body = (expression.Body.NodeType == ExpressionType.Convert) ? (MemberExpression)((UnaryExpression)expression.Body).Operand : (MemberExpression)expression.Body; return body.Member.Name; However, if there is deeper nesting, e.g. x = x.Prop1.SubProp1, this only gets the most deeply nested name, e.g. "SubProp1" instead of "Prop1.SubProp1" Is there anyway to access the full property path of a lambda expression?

    Read the article

  • How to use value from primary accessdatasource control as parameter in select query for secondary ac

    - by weedave
    Hi, I'm trying to display all orders placed and I have a primary accessdatasource control that has a select query to get the customer information and the orderID. I want to use the orderID value from this first query as a parameter for the secondary accessdatasource control that selects the product information of the products in the order. In plain english, I want to:- select product info from product table where orderID = ? (where ? is the orderID value from the first query) I have tried the <%#Eval("OrderID")% but I get a "server tag not well formed" error, but I do get results returned when I just type the order ID in, but obviously every result (order) just contains the same product info... <asp:Repeater ID="Repeater1" runat="server" DataSourceID="AccessDataSource1"> <ItemTemplate> <asp:AccessDataSource ID="AccessDataSource2" runat="server" DataFile="~/App_Data/project.mdb" SelectCommand="SELECT orderDetails.OrderID, album.Artist, album.Album, album.Cost, album.ImageURL, orderDetails.Quantity, orderDetails.Total FROM (album INNER JOIN orderDetails ON album.AlbumID = orderDetails.AlbumID) WHERE (orderDetails.OrderID = ? )"> <SelectParameters> // Error is on this line <asp:Parameter Name="OrderID" DefaultValue="<%#Eval ("OrderID")%>" /> </SelectParameters> </asp:AccessDataSource> <div class="viewAllOrdersOrderArea"> <div class="viewAllOrdersOrderSummary"> <p><b>Order ID: </b><%#Eval("OrderID")%></p> <h4>Shipping Details</h4> <p><b>Shipping Address: </b><%#Eval("ShippingName")%>, <%#Eval("ShippingAddress")%>, <%#Eval("ShippingTown")%>, <%#Eval("ShippingPostcode")%></p> <h4>Payment Details</h4> <p><b>Cardholder's Address: </b><%#Eval("CardHolder")%>, <%#Eval("BillingAddress")%>, <%#Eval("BillingTown")%>, <%#Eval("BillingPostcode")%></p> <p><b>Payment Method: </b><%#Eval("CardType")%></p> <p><b>Card Number: </b><%#Eval("CardNumber")%></p> <p><b>Start Date: </b><%#Eval("StartDate")%>, Expiry Date: <%#Eval("ExpiryDate")%></p> <p><b>Security Digits: </b><%#Eval("SecurityDigits")%></p> <h4>Ordered items:</h4> <asp:Repeater ID="Repeater2" runat="server" DataSourceID="AccessDataSource2"> <ItemTemplate> <div style="display: block; float: left;"> <div class="viewAllOrdersProductImage"> <img width="70px" height="70px" alt="<%# Eval("Artist") %> - <%# Eval("Album") %>" src="assets/images/thumbs/<%# Eval("ImageURL") %>" /> </div> <div style="display:block; float:left; padding-top:15px; padding-right:20px;"><p><b><%# Eval("Artist") %> - <%# Eval("Album") %></b></p> <p>£<%# Eval("Cost") %> x <%# Eval("Quantity") %> = £<%#Eval("Total")%></p></div> </div> </ItemTemplate> </asp:Repeater> </div> </div> </ItemTemplate> </asp:Repeater>

    Read the article

  • SQL Server WHERE Clause using Temporary Columns

    - by AbeP
    Hi all, I have the following query, which uses a CASE statement. Is there anyway to add into the where clause WHERE IsBusinessDayFinal = 0? without using a temporary table? thanks so much! SELECT ac.DateTimeValue, CASE WHEN pc.IsBusinessDay IS NOT NULL THEN pc.IsBusinessDay ELSE ac.IsBusinessDay END AS IsBusinessDayFinal, ac.FullYear, ac.MonthValue, ac.DayOfMonth, ac.DayOfWeek, ac.Week FROM [dbo].[AdminCalendar] ac LEFT JOIN [dbo].ProjectCalendar pc ON ac.DateTimeValue = pc.DateTimeValue AND pc.ProjectId = @projectId WHERE ac.DateTimeValue >= @startDate AND ac.DateTimeValue <= @finishDate;

    Read the article

  • laptop motherboard "shorts" when connected to adapter

    - by Bash
    Disclaimer: I'm sort of a noob, and this is a long post. Thank you all in advance! summary: completely dead laptop with no signs of life whatsoever (suddenly, for no apparent reason) Here's the deal: Lenovo Y470 (only a few months old with no water or shock damage). It stopped working suddenly (no lights, no sound, even when connecting adapter with or without battery). I tried a different adapter (same electrical rating), but no luck. I disassembled the thing completely, and tried plugging in the adapter and looking for signs of life with all different combinations of components installed (tried all combinations of RAM, CPU, USB power cords, screen, etc plugged in). no luck. Then, I noticed (as I was plugging in the adapter to try for the millionth time) that there was a "spark" for an instant when I first connect the adapter to the power jack. The adapter's LED would then flash (indicating it isn't working or charging). So, I thought the power jack has a short of some sort (due to bad soldering or something). Scanned virtually every single component on the motherboard, and tested the power jack connections with a multimeter. No shorts or damage to anything on the entire motherboard. Now I'm thinking I need to replace the motherboard. But, my actual question: What does this "shorting" when connecting the adapter signify? (btw, the voltage across the power connections and current through it drop to virtually zero when the adapter is connected and "sparks", and they stay that way). The bewildering thing is that there are no damaged components, and the voltage across adapter terminals returns to normal after I disconnect it (so it's not damaged). Please take a look at the pictures (of the motherboard's power connection and nearby components) and see if I'm missing something completely obvious... Links to pictures and laptop and motherboard model: pictures on DropBox Motherboard model: LA-6881P Laptop model: Lenovo IdeaPad Y470

    Read the article

  • Durable power adapter for HP laptop?

    - by snitzr
    I'm on my third power adapter for my HP Pavilion dv4-1435dx in less than one year. I'm not abusing them. I used Mac laptops for 10 years (before needing to switch to a PC) without a problem. I tried a Targus universal power adapter, but it wouldn't charge my PC, it worked fine on another laptop http://www.targus.com/us/product_details.aspx?sku=APA6911US Any suggestion for a more durable and reliable power adapter?

    Read the article

  • Durable laptop power adapter?

    - by snitzr
    I'm on my third power adapter for my HP Pavilion dv4-1435dx in less than one year. I'm not abusing them. I used Mac laptops for 10 years (before needing to switch to a PC) without a problem. I tried a Targus universal power adapter, but it wouldn't charge my PC, it worked fine on another laptop http://www.targus.com/us/product_details.aspx?sku=APA6911US Any suggestion for a more durable and reliable power adapter?

    Read the article

  • Laptop charger disconnects and reconnects, charger or battery broken?

    - by Rob
    I've got an Acer Aspire One netbook (AOA-150) and there's obviously something wrong with it. The charging port gets VERY HOT and the charger seems to disconnect and reconnect quickly sometimes. This only happens when the netbook is running, and it doesn't seem to care what it's doing other than being on. The battery has an extremely short life (< 30minutes, sometimes) and I almost exclusively run it on the power cable (which needs the battery plugged in. Having it just plugged into the wall won't start up). Does this sound like a problem with the power cable or the battery? The plug for the cable and the port get so hot that if I held them for longer than a few seconds, I'm sure I'd get burnt. EDIT Just got "Popular Question" on this and it WAS the power jack. The ground on it came loose from the board. A bit of solder on it and everything is working great again.

    Read the article

  • Can you plug-in the battery while laptop is on AC only?

    - by Ivan Petrushev
    Hello, I'm using my laptop at home with battery removed and only connected to the AC power. However I'm lacking the mobility as my power cord is kinda short. Is it safe from electrical point of view to plug in the battery while the laptop is connected to AC and disconnect the AC power afterwards? What about the opposite side of the question - is it safe (or what the damage could be) if you work on battery, plug in the AC and unplug the battery? If there are differents for different models of laptops, I'm asking about IBM Lenovo T60. Is there such thing as a 'hot-plug battery'?

    Read the article

  • Is it safe to use an American power adapter in India and Australia?

    - by Stan
    I'm going to India and Australia on a business trip in a couple of days and plan to carry only a tablet instead of my trustworthy laptop (which got dunked in the tub by my oldest - don't ask). The adapter states the following: 100-240V~0.65A, 50/60Hz Output 12V===2A Will it be safe to use the adapter in these countries to charge my device, or do I have to buy new ones there? If the latter, what kind? What else should I take along with me? A surge protector?

    Read the article

  • Ubuntu won't suspend automatically any more

    - by Sparhawk
    In the last month or so, Ubuntu (12.04) has stopped sleeping automatically. I've gone to System Settings Power, and verified (and toggled) "suspend on inactive for" to 5 minutes (for both battery and "when plugged in"), but the system stays awake. I've also tried used code similar to $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 300 $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 300 to set the timeout values. I've also verified these in dconf Editor. Previously, I could set this quite low to make my computer sleep quickly, but now it no longer works either. I'm not sure if this is relevant, but under old versions of Ubuntu, if I wanted my computer to never suspend (via the CLI), I would also have to set $ gsettings set org.gnome.settings-daemon.plugins.power sleep-inactive-ac false At some point, this seemed to have been depreciated (and also gave me the error "No such key 'sleep-inactive-ac'"). I found that it it was enough to set sleep-inactive-ac-timeout to 0. This worked for a while, but at some point auto-suspend stopped working as stated above. Oddly enough, the sleep-inactive-ac key is still present when I look via dconf editor. However, when I click it, it says "no schema", and the summary, etc. fields are blank. To test if the dconf power plugin was working, I tried playing around with other settings in the schema. Idle-dim-time and idle-dim-ac work as expected . However, setting sleep-display-ac to 5 seconds has no effect. I'm also not sure if this is relevant, but I've uninstalled gnome-screensaver, and installed xscreensaver. I have tried killing xscreensaver and re-installing gnome-screensaver, but this did not help. I've also had some trouble with DPMS. I'm not sure if this is related, but I'll put the information here, just in case. Using xscreensaver, I set Power Management to enabled, with standby and suspend timeouts to 10 minutes. I've verified these settings in ~/.xscreensaver and xset q. However, the screen blanks after about 30 seconds. If I turn off DPMS (either via xscreensaver GUI or modifying ~/.xscreensaver), it won't blank at all, so I know that DPMS is partially reading the xscreensaver settings. -- edit I've attempted more troubleshooting, by creating a new user account, then logging out of the main account and into the new account. I've tried modifying the timeouts via dconf, but get the same results as above (i.e. it doesn't work, nor does sleep-display-ac, but idle-dim-time and idle-dim-ac work). Also, the depreciated sleep-display-ac key is not visible, so I think that this is probably unrelated. -- edit I've since moved to gnome-shell instead of unity, and still have this problem, so I guess that it's something to do with gnome-power-manager.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >