Search Results

Search found 2610 results on 105 pages for 'dell inspiron'.

Page 2/105 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Function key emulator for Dell inspiron 6400 on external keyboard

    - by hardik988
    I have a 3 year old Dell inspiron 6400 with windows 7 and ubuntu 9.10 dual boot. I messed up my Laptop keyboard and hence my Fn key is not working and I need it to activate the wireless whose activation combination is Fn+F2. Is there any way I can emulate the Fn key or get my wireless to start in windows or ubuntu ? My bios has an option for Fn key emulation but that only supports external PS/2 keyboards and my laptop doesn't have a ps/2 slot. Any ideas would be appreciated ..

    Read the article

  • iDRAC on Dell R710 and R720

    - by BT643
    I've called Dell twice to try and clarify this basic (or so I thought) question, but I've had two different answers so far. We have a Dell R710, and a Dell R720. Does DRAC come installed by default on either? Dell said it comes build into the motherboard on the R720 but the second time I rang, they said we didn't have it. Can anyone tell me if DRAC comes as standard on the R720? I'm aware we'll need a license as well, I'm just interested in the physical capability on the server. I've never used DRAC before and know next to nothing about it, so apologies if this seems blindingly simple. Thanks

    Read the article

  • Wireless on Inspiron 1501 not working on Ubuntu 12.04 LTS

    - by Jeek C
    As titled, I have Ubuntu 12.04 LTS on an Inspiron 1501, and the wireless has refused to work thus far. Below is what I have tried: Activating the Broadcom driver via System Settings Additional Driver Using the below commands sudo apt-get remove bcmwl-kernel-source sudo apt-get install firmware-b43-installer installing the cutter software Sadly, none of them can get the wireless working. Is there anything else I can try?

    Read the article

  • Ubuntu 12.04 video issue on Dell Inspiron 1100

    - by Edwould
    I have an old clunker - Dell Inspiron 1100 with A32 BIOS. I managed to install correctly from a USB drive, and the screen showed graphics in full natice 1024 x 768 - as did the 'try from USB' Ubuntu option. Once I committed to a full install on the HDD, the video resolution comes up as 640 x 480 with no other resolutions to change to full screen. Does anyone have some advice to allow the full LCD panel to be used? Thanks for reading Ed

    Read the article

  • Cannot install 14.04 on Dell Inspiron 5447 14

    - by user292121
    I install Ubuntu version 14.04 by use USB stick is a boot devices on DELL Inspiron 5447 14" but it stuck in ubuntu logo. I change to use Linux Mint and it still stuck in the same process is pending in Mint logo. When I change to Linux Mint Compatibility Mode it shown some error meassage. For the stuck screen please see the url below: http://www.image-share.com/upload/2583/266.jpg For the error massage when I try to use Linux Mint can see as below: http://www.image-share.com/ijpg-2583-268.html How can i do next ?

    Read the article

  • Dell Inspiron 1210 mini Blank Screen on boot 12.04

    - by jrod
    Dell Inspiron 1210 mini Blank Screen on boot 12.04 If I mash buttons I get to a gray screen then the login screen and into the desktop but normally I turn on the laptop and I see a black screen with a cursor then a purple screen then it just goes black. I can hit ctrl alt F1 or F2 and get a prompt. I've tried using the poulsbo ppa driver script fix but that doesn't work. I don't knwo what to do now. I have the OS installed and when I did get into the OS by mashing buttons I installed updates and wireless adapter drivers. It works but if I reboot I jsut get to the black screen and have no idea what to do. What needs to be done so that I can just boot up and see the login screen!?

    Read the article

  • Dell Vostro 1000 w/fresh XP Pro installation running very slow

    - by ssvarc
    I'm working on a Dell Vostro 1000 laptop. It was running slowly and hanging, antivirus scans turned up nothing and the same with the Dell diagnostics (DFT hung - but Dell's diagnostics gave the HD a pass) so I imaged the HD and installed XP Pro on it. The laptop is still slow! (It takes a noticeable delay to enter words into the Google search box in IE and the computer hangs every time it enters the XP screensaver.) What are the likely possibilities at this point and how would I go about checking for them?

    Read the article

  • Dell XPS 15z/ L511Z merging partitions

    - by Alvin M
    i have a situation here, i bought a new dell xps 15z and was successful in making drive partitions through the help of this site (http://superuser.com/questions/313082/dell-xps-15-l502x-hard-drive-partition) now i have drive C with 100.55gb and a new volume with 578.45gb im planning to use EaseUS again to undo this and resize my drive C but im scared i might cause damage to my drive, is there a proper way to undo this and transfer the remaining 78.45gb from the new volume back to my drive C again? please help

    Read the article

  • New Dell PE R710 - Storage Question

    - by rihatum
    Hi All, Dell PE R710, received from Dell in the following state : Windows Disk 0 1800GB ( Volume C & D ) Windows Disk 1 526 GB (Volume E ) Perc6i Integrated Raid Controller 6 x 500GB Nearline SAS 7200RPM HDDs Raid 5 Configuration with two Virtual Disks I have installed Dell open Manage and it shows the following : Virtual Disk 0 - State : Background Initialization ( 7% ) Virtual Disk 1 - State : Background Initialization ( 25% ) Now when I click on Virtual Disk 0 it shows me all 6 Disks and the same happens when I click on Virtual Disk 1 it displays all 6 disks. But when I click on Storage Perc6i Connector 0 I get 4 Physical disks with the following numbers : Physical Disk 0:0:0 Physical Disk 0:0:1 Physical Disk 0:0:2 Physical Disk 0:0:3 When I click on Storage Perc6i Connector 1 I get 2 Physical Disks Listed in the following way : Physical Disk 1:0:4 Physical Disk 1:0:5 I am a little confused in this description, does this 1:0:4 interprets to Controller1, Disk4. Does this integrated raid card have two controllers coming out of it ? Also, When I first switched on the machine, the boot partition was showing 1GB Available out of 40GB, now its showing 38GB available out of 40GB. Is this because the Virtual Disks are still Initializing ? Any recommendations or suggestions ? Also, this server have 6 x 500GB NearLine SAS Hard drives, what would be a good raid config ? We are planning to use it for Hyper-V with quite a few (7 or 8) virtual servers, your suggestions would be helpful. Also, while the virtual disks are in a initialization state, can I destroy and re-create the raid configuration ? I would have to do it at the BIOS CTRL-M ? Thanks and Regards

    Read the article

  • Dell XPS 17 Laptop USB SS Ports don't work until machine rebooted

    - by Matt
    I have a new Dell XPS 17 laptop and have an issue that the two USB SS ports on the rear of the machine are not recognising anything when I start-up. Have tried mouse, keyboard, headset, USB display. If I plug a USB hub in the power light on the hub lights (presume this is hard-wired) but a mouse plugged into the hub does not light up. If I restart the pc the ports work fine. Also the other two USB ports work fine all the time. I have switched off the power saving setting on the device manager (Power managementAllow the computer to turn off this device to save power) and also in the advanced power settings (USB Settings USB Selective suspend setting:disabled) I have also disabled USB powershare in the BIOS (not sure what this actually does!) This is becoming very annoying having to restart the machine every day before I can start work Running Win 7 Pro x64 EDIT: I have found that setting USB Emulation to Disabled has helped the devices to be recognised during start up but they keep dropping out completely when in use EDIT 2: I contacted Dell about this issue who told me to update the BIOS driver, when I asked if I should downgrade from the factory installed A13 to the A12 posted on the dell website they said no. However there is now an A14 available on the website has anyone tried this?

    Read the article

  • Dell XPS 15 L502X hard drive Partition

    - by Mohan Gajula
    I have a situation here. I got my new Dell XPS 15 Laptop. The configuration of hard drive is as below : Volume 1: (OEM Partition): 133MB Volume 2: OS (C:): 685.25 GB Volume 3: Recovery : 13.25 GB Now, I am trying to re-partition my C Drive to have a C: drive with 100 GB and a new drive with 585 GB. Earlier, I tried using the Windows 7 Disk Management to shrink and extend the volume. That lead to the OS and hard drive not working. Dell Tech support tried to fix the issue, but they were not able to fix the issue online. Later a Dell Technician arrived my place, and replaced the hard drive with a new hard drive. Please help me re-partition the C: Drive with 100 GB, and new D drive with 585 GB. I don't want to lose my Recovery Partition. SOLUTION As Suggested by KCotreau below , I have done exactly. I have resized the C drive to 100 GB. And then applied the changes. Windows got restarted. On the boot screen, the partition was taking place. It took around 30 mins ( approx. ). Once after restart, I can see my C drive is 100 GB. Now opened the Easeus again. And created a new partition for the free space ( 585 GB ) this took 10 seconds to create. Here goes the screenshot after partitioning. Thanks to KCotreau. You are amazing.

    Read the article

  • Dell Inspiron 15R 5520 Wireless Device Not Detected

    - by ashish
    I bought a Dell Inspiron 5520 15R last week and I am a newbie in Ubuntu platform. I installed Windows 7 as well as Ubuntu 12.04 64-bit. But my wireless device is not detected in Ubuntu while it is working fine in Windows OS. My wireless device is Dell Wireless 1704 802.11B 2.4GHZ. Is this a compatibility problem with Ubuntu. What would be the solution? Do I need to install another version of Ubuntu?

    Read the article

  • VMware vSwitches and Dell PowerConnect BPDU guard

    - by dunxd
    I am using two Dell PowerConnect 6248 switches to connect a VMware host vSwitch. A discussion of config of Cisco switches for use with VMware advises to set physical ports connected to vSwitch with bpduguard and portfast. However, Dell switches don't have the bpduguard setting for individual ports. I can switch it off globally for all portfast ports, but I don't think I want to do that. Should I: Disable STP on the vSwitch connected ports? Leave STP on and enable portfast on the ports, and forget about bpduguard? Disable bpduguard on all portfast ports via global config Do something else? See also: VMware vSwitches and spanning tree

    Read the article

  • I can't install Ubuntu on my Dell Inspiron 15R at all

    - by Kieran Rimmer
    I'm attempting to install Ubuntu 12.04LTS, 64 bit onto a Dell Inspiron 15R laptop. I've shrunk down one of the windows partitions and even used gparted to format the vacant space as ext4. However, the install disk simply does not present any options when it comes to the partitioning step. What I get is a non-responsive blank table As well as the above, I've changed the BIOS settings so that USB emulation is disabled (as per Can't install on Dell Inspiron 15R), and changed the SATA Operation setting to all three possible options. Anyway, the install CD will bring up the trial version of ubuntu, and if I open terminal and type sudo fdisk -l, I get this: Disk /dev/sda: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xb4fd9215 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility Partition 1 does not start on physical sector boundary. /dev/sda2 * 81920 29044735 14481408 7 HPFS/NTFS/exFAT /dev/sda3 29044736 1005142015 488048640 7 HPFS/NTFS/exFAT /dev/sda4 1005154920 1953520064 474182572+ 83 Linux Disk /dev/sdb: 32.0 GB, 32017047552 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62533296 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xb4fd923d Device Boot Start End Blocks Id System /dev/sdb1 2048 16775167 8386560 84 OS/2 hidden C: drive If I type 'sudo parted -l', I get: Model: ATA WDC WD10JPVT-75A (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/4096B Partition Table: msdos Number Start End Size Type File system Flags 1 32.3kB 41.1MB 41.1MB primary fat16 diag 2 41.9MB 14.9GB 14.8GB primary ntfs boot 3 14.9GB 515GB 500GB primary ntfs 4 515GB 1000GB 486GB primary ext4 Model: ATA SAMSUNG SSD PM83 (scsi) Disk /dev/sdb: 32.0GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 8589MB 8588MB primary Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: Can't have a partition outside the disk! I've also tried a Kubuntu 12.04 and Linuxmint install disks, wityh the same problem. I'm completely lost here. Cheers, Kieran

    Read the article

  • Laptop choice for development: MacBook Pro 17 vs Dell Studio XPS 16 vs HP Envy 15

    - by Shalan
    Hey! First things first - let me state that I am not intending to play games on this - I have narrowed down to these 3 purely based on specs and its individual brand reliability in the market. I intend to primarily use: Visual Studio 2008 Pro a lot (develop and deploy on Windows platforms) SQL Server 2005 Oracle 10g Adobe Photoshop CS4 Microsoft Expression Studio Google Sketchup I currently use a desktop PC (Core2Duo 2.66Ghz with 3GB DDRII memory) running Vista Business 32-bit - and I have to admit that, especially for Visual Studio, its quite sluggish to a point where it affects productivity. Furthermore, I intend to only use the notebook on a table - with a cooled surface, like granite :) - so I would appreciate people's input with regard to heat issues. Im aware that the Dell's primary exhaust gets blocked by the lid when open, but some reviews don't seem to place extraordinary emphasis on heat issues resulting from this. My options for the Dell/Alienware: Core i7 720QM 4GB DDRIII memory ATI mobility 3670 (512) 128GB Solid State Drive 16-inch Full HD RGB-LED LCD display (1080p) 3-year next-business-day support My configuration for the Apple MBP: Core2Duo 2.8Ghz (Im assuming the T9600) 4GB DDRIII memory 128GB Solid State Drive standard 1 year support The one advantage I think of with the MBP is that I can have the addition of OSX (though Im unsure what I would use it for, but purely to play around with a much-boasted-about OS) What are your thoughts on this, especially regarding build-quality, heat, performance and battery-life? Much thanks! ~shalan

    Read the article

  • Dell OpenManage On Ubuntu Server 12.04 Cannot Log In

    - by Austin
    I have a Dell Poweredge 2950 with 2X130GB and 2X2TB drives. I need to set them up in a RAID 1 array so that the 130GB Drives are mirrored and host the OS, while the 2TB drives are mirrored and are the content drives. So I go from 4 disks, down to two, one 130GB and one 2TB. I can do that in the BIOS RAID utility no problem. But I need to be able to manage the RAID arrays and be able to expand them WITHOUT shutting down the server. Now, to my understanding, openmanage will allow me to do that AND it runs on ubuntu. So I go and set it up and try to log into the web interface at and it will not let me log in. I have followed dell's guide to set up openmanage, even added the usernames to the files and permissions and such, however, cannot get it to let me log in or anything. I have reinstalled Openmanage several times, even reinstalled the OS three times, and nothing works. Google does not help either. It simply says login failed after hitting submit. Please Help

    Read the article

  • Dell PowerEdge 860 won't boot but gets power

    - by fierflash
    I have a Dell PowerEdge 860. Got an 2008 R2 running on it. Here is the scenario I'm currently in: I can boot it up and work as usuall. But when I restart it, it just shuts down, doesn't reboot, and it won't boot up again. Then it stays in this "mode", On/off button blinking green(standby mode?) and System Indicator LED blinking amber. If I try to press the On/Off button on the frontpanel it won't boot. It's like you can hear the fan from the PSU running but nothing else is trying to boot. If I unplug the powercable and then put it back in again it's the same, the extremley noisy fans won't start and it's just sitting there. If I let it "rest" for like 1 to 24 hours while the powercable is unplugged and I plug it in again, it boots directly, without me having to push the On/Off button. What I have tried: Run diagnostics(not the one in POST phase) and everything is fine Booting without any cables except the powercable Boot without memory installed Boot without the raidcable plugged in Cleared NVRAM Reseated all the components and cables Googling like a freak for any possible solution Tried Dell Support but I don't have any warranty left so they can't help me unless i pay some ridiculous amount of money I suppos Do anyone have some experience with the same issue? Do I need to replace something or is there any other way to determine the problem? Any help will be greatly appreciated.

    Read the article

  • Xubuntu 14.04 install fails on Dell Inspiron B130 with Broadcom 4318

    - by K7AAY
    I have a Dell Inspiron B130 I am trying to install 32-bit Xubuntu 14.04 on. The install of 13.10 was AOK but the update failed catastrophically, so I am reinstalling from scratch. WiFi and the Ethernet port work AOK in Windows 8.1u1 (70 secs to boot) and Mint 16 Cinnamon (135 secs to boot), but neither work in 14.04 and the install fails on the Dell; it won't find the network (which also fails on Bodhi 32-bit). Since any install fails whether or not I have an Internet connection (with "An attempt to configure apt to install additional packages from the CD failed") whether or not I select to update apps in the install, whether or not I choose to install MP3 and other Multiverse items, I am unable to install then go get drivers.

    Read the article

  • Dell BH200 poor audio

    - by Akshay
    Hello, I got Dell BH200. I recently upgraded my xps m1530 to windows 7 but the audio quality with BH200 is terrible. I connected it to my phone and the audio quality is really good. Any solutions??

    Read the article

  • Dell 36400 Display issue - "doubling up" intermittently

    - by alex
    I've got a Dell E6400 It's suddenly developed an intermittent fault with the display Every now and again, it seems to boot up with "double vision" By that I mean, its split horizontally, with each half showing the same thing, but with low resolution, and looks grainy - if that makes sense (I will try to get a couple of pictures if I can) I haven't changed any hardware or anything. I have re-built windows, to see if that fixed the problem, it didn't. I've upgraded the BIOS to see if that would help, still same problem. I'm out of ideas :-(

    Read the article

  • Dell E6400 Display issue - "doubling up" intermittently

    - by alex
    I've got a Dell E6400 It's suddenly developed an intermittent fault with the display Every now and again, it seems to boot up with "double vision" By that I mean, its split horizontally, with each half showing the same thing, but with low resolution, and looks grainy - if that makes sense (I will try to get a couple of pictures if I can) I haven't changed any hardware or anything. I have re-built windows, to see if that fixed the problem, it didn't. I've upgraded the BIOS to see if that would help, still same problem. I'm out of ideas :-(

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >