Search Results

Search found 70 results on 3 pages for 'jakobud'.

Page 2/3 | < Previous Page | 1 2 3  | Next Page >

• dhcpd won't let go of old leases

  - by Jakobud

  We have DHCP setup to hand out leases in the following range: 192.168.10.190 - 192.168.10.254 (roughly 65 leases) Our small business network only has about 30 computers that use DHCP. We noticed that dhcpd stopped handing out new dynamic leases to the computers, even though there are definitely not 65 computers on the network. Why has it stopped handing out leases? Is it not releasing old un-used leases? How do we tell dhcpd to let go of old leases and start handing out fresh ones again?

  Read the article

• Basic Apache setup is not seeing my site

  - by Jakobud

  Sorry that is a horrible thread subject, but I cannot think of a better more descriptive subject. We are running a Fedora 11 server that is currently hosting some CRM on it. I want to use a VirtualHost directive to add another site to the server. So I created this conf: /etc/httpd/conf.d/mysite.ourdomain.com.conf And here is the content: <VirtualHost *:80> ServerName mysite.ourdomain.com DocumentRoot /www/mysite ServerAdmin [email protected] ErrorLog /var/log/mysite.ourdomain.com-error.log CustomLog /var/log/mysite.ourdomain.com-access.log common </VirtualHost> I restarted apache, getting the following warning: [warn] NameVirtualHost *:80 has no VirtualHosts From what I read, this warning is not related and I can ignore it and my site should still be up and running, correct? (I'll troubleshoot this error later if so) Well I have our DNS server setup to point mysite.ourdomain.com to goto this server. I can ping it and it points to the correct LAN IP, etc.. Now when I try to access it in the browswer I get nothing. It just says Connecting... and never gets there. If I try mysite.ourdomain.com or the IP address, neither one doesn't get there. It's a very simple and basic apache setup so I'm not sure what I'm doing wrong... Like I said, the other thing that is running on this server is a crm and it's .conf looks something like this: Listen x.x.x.x:443 <VirtualHost x.x.x.x:443> ServerAdmin [email protected] ServerName crm.ourdomain.com ErrorLog /var/log/httpd/ourdomain/crm-error.log CustomLog /var/log/httpd/ourdomain/crm-access.log common DocumentRoot /www/ourdomain/crm <IfModule mod_dir.c> DirectoryIndex /index.php </IfModule> </VirtualHost> There is also some LDAP authentication stuff in that config but I left it out cause I assumed it wasn't necessary to post. Anyone have any clue where I should start or what settings I can post from httpd.conf that would help?

  Read the article

• df shows partition as full, but du shows it as only 25% full

  - by Jakobud

  I have a humble linux server to do some stuff for me. I only have an old 16gig drive in it. df -h Filesystem Size Used Avail Use% Mounted on /dev/md1 16G 16G 0 100% / /dev/md0 121M 14M 101M 13% /boot tmpfs 502M 0 502M 0% /dev/shm but when I do: du -sh / 3.5G / So one says that my 16G drive is full. The other says only 3.5G is used. Why the discrepancy? I cannot write any new files as it says the drive is indeed full. But if I can't find the files taking up all the space on the file-system, how can I delete them to free up space?

  Read the article

• BackupPC - why does it use rsync --sender --server ... ?

  - by Jakobud

  I'm in the process of experimenting with BackupPC on a CentOS 5.5 server. I have everything pretty much setup with default values. I tried setting up a basic backup for a host's /www directory. The backup fails with the following errors: full backup started for directory /www Running: /usr/bin/ssh -q -x -l root target /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Xfer PIDs are now 30395 Read EOF: Connection reset by peer Tried again: got 0 bytes Done: 0 files, 0 bytes Got fatal error during xfer (Unable to read 4 bytes) Backup aborted (Unable to read 4 bytes) Not saving this as a partial backup since it has fewer files than the prior one (got 0 and 0 files versus 0) First of all, yes I have my ssh keys setup to allow me to ssh to the target server without requiring a password. In the process of troubleshooting, I tried the above ssh command directly from the command line, and it hangs. Looking at the end of the debug messages for SSH I get: debug1: Sending subsystem: /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Request for subsystem '/usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/' failed on channel 0 Next I started looking at the rsync flags. I did not recognize --server and --sender. Looking at the rsync man pages, sure enough, I don't see anything about --server or --sender in there. What are those in there for? Looking at the BackupPC config I have this: RsyncClientPath = /usr/bin/rsync RsyncClientCmd = $sshPath -q -x -l root $host $rsyncPath $argList+ And for the arguments, I have the following listed: --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive Notice there is no --server, --sender or --ignore-times. Why are these things getting added in? Is this part of the problem?

  Read the article

• Swap static public IPs without creating DNS conflicts?

  - by Jakobud

  Our ISP is Comcast and we have 5 static public IPs from them that we use for various services, including customers connecting to our network, VPN, web, DNS, etc... We need more IP addresses from Comcast. Unfortunately, Comcast is telling us that they can't just simply give us 5 more addresses. They only give static IP addresses in blocks of 1, 5 or 13. In order for us to get more static IPs, they have to take away our current 5 static IPs and give us 13 new ones. How do we make this transition without causing all sorts of DNS chaos? We run public DNS servers, so we can make the DNS changes ourselves, but it will take some time obviously for those DNS changes to propagate throughout the internet. Are there any easy ways to make this transition? Like create some type of fallback DNS entry or something? Surely there must be some sort of procedure for this kind of thing. The Comcast support guy was useless.

  Read the article

• ls hangs for a certain directory

  - by Jakobud

  There is a particular directory (/var/www), that when I run ls (with or without some options), the command hangs and never completes. There is only about 10-15 files and directories in /var/www. Mostly just text files. Here is some investigative info: [me@server www]$ df . Filesystem Size Used Avail Use% Mounted on /dev/mapper/vg_dev-lv_root 50G 19G 29G 40% / [me@server www]$ df -i . Filesystem Inodes IUsed IFree IUse% Mounted on /dev/mapper/vg_dev-lv_root 3.2M 435K 2.8M 14% / find works fine. Also I can type in cd /var/www/ and press TAB before pressing enter and it will successfully tab-completion list of all files/directories in there: [me@server www]$ cd /var/www/ cgi-bin/ create_vhost.sh html/ manual/ phpMyAdmin/ scripts/ usage/ conf/ error/ icons/ mediawiki/ rackspace sqlbuddy/ vhosts/ [me@server www]$ cd /var/www/ I have had to kill my terminal sessions several times because of the ls hanging: [me@server ~]$ ps | grep ls gdm 6215 0.0 0.0 488152 2488 ? S<sl Jan18 0:00 /usr/bin/pulseaudio --start --log-target=syslog root 23269 0.0 0.0 117724 1088 ? D 18:24 0:00 ls -Fh --color=always -l root 23477 0.0 0.0 117724 1088 ? D 18:34 0:00 ls -Fh --color=always -l root 23579 0.0 0.0 115592 820 ? D 18:36 0:00 ls -Fh --color=always root 23634 0.0 0.0 115592 816 ? D 18:38 0:00 ls -Fh --color=always root 23740 0.0 0.0 117724 1088 ? D 18:40 0:00 ls -Fh --color=always -l me 23770 0.0 0.0 103156 816 pts/6 S+ 18:41 0:00 grep ls kill doesn't seem to have any affect on the processes, even as sudo. What else should I do to investigate this problem? It just randomly started happening today. UPDATE dmesg is a big list of things, mostly related to an external USB HDD that I've mounted too many times and the max mount count has been reached, but that is an un-related problem I think. Near the bottom of dmesg I'm seeing this: INFO: task ls:23579 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. ls D ffff88041fc230c0 0 23579 23505 0x00000080 ffff8801688a1bb8 0000000000000086 0000000000000000 ffffffff8119d279 ffff880406d0ea20 ffff88007e2c2268 ffff880071fe80c8 00000003ae82967a ffff880407169ad8 ffff8801688a1fd8 0000000000010518 ffff880407169ad8 Call Trace: [<ffffffff8119d279>] ? __find_get_block+0xa9/0x200 [<ffffffff814c97ae>] __mutex_lock_slowpath+0x13e/0x180 [<ffffffff814c964b>] mutex_lock+0x2b/0x50 [<ffffffff8117a4d3>] do_lookup+0xd3/0x220 [<ffffffff8117b145>] __link_path_walk+0x6f5/0x1040 [<ffffffff8117a47d>] ? do_lookup+0x7d/0x220 [<ffffffff8117bd1a>] path_walk+0x6a/0xe0 [<ffffffff8117beeb>] do_path_lookup+0x5b/0xa0 [<ffffffff8117cb57>] user_path_at+0x57/0xa0 [<ffffffff81178986>] ? generic_readlink+0x76/0xc0 [<ffffffff8117cb62>] ? user_path_at+0x62/0xa0 [<ffffffff81171d3c>] vfs_fstatat+0x3c/0x80 [<ffffffff81258ae5>] ? _atomic_dec_and_lock+0x55/0x80 [<ffffffff81171eab>] vfs_stat+0x1b/0x20 [<ffffffff81171ed4>] sys_newstat+0x24/0x50 [<ffffffff810d40a2>] ? audit_syscall_entry+0x272/0x2a0 [<ffffffff81013172>] system_call_fastpath+0x16/0x1b And also, strace ls /var/www/ spits out a whole BUNCH of information. I don't know what is useful here... The last handful of lines: ioctl(1, SNDCTL_TMR_TIMEBASE or TCGETS, {B38400 opost isig icanon echo ...}) = 0 ioctl(1, TIOCGWINSZ, {ws_row=68, ws_col=145, ws_xpixel=0, ws_ypixel=0}) = 0 stat("/var/www/", {st_mode=S_IFDIR|0755, st_size=4096, ...}) = 0 open("/var/www/", O_RDONLY|O_NONBLOCK|O_DIRECTORY|O_CLOEXEC) = 3 fcntl(3, F_GETFD) = 0x1 (flags FD_CLOEXEC) getdents(3, /* 16 entries */, 32768) = 488 getdents(3, /* 0 entries */, 32768) = 0 close(3) = 0 fstat(1, {st_mode=S_IFCHR|0620, st_rdev=makedev(136, 9), ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f3093b18000 write(1, "cgi-bin conf create_vhost.sh\te"..., 125cgi-bin conf create_vhost.sh error html icons manual mediawiki phpMyAdmin rackspace scripts sqlbuddy usage vhosts ) = 125 close(1) = 0 munmap(0x7f3093b18000, 4096) = 0 close(2) = 0 exit_group(0) = ?

  Read the article

• tar Cannot open: No such file or directory

  - by Jakobud

  Fresh install of CentOS 5.4 Downloaded the following: http://prdownloads.sourceforge.net/webadmin/webmin-1.510.tar.gz MD5 sum is correct (cdcc09d71d85d81914a90413eaf21d3f). The file is located here: /tmp/webmin-1.510.tar.gz tmp and webmin-1.510.tar.gz both have chmod 777. I am logged in as root. Command: tar -zxfv webmin-1.510.tar Result: tar: v: Cannot open: No such file or directory tar: Error is not recoverable: exiting now tar: Child returned status 2 tar: webmin-1.510.tar: Not found in archive tar: Error exit delayed from previous errors Never run across this before. It's like it thinks that v is a file I want to extract, but its one of the command arguments... If I leave out the v... tar -zxf webmin-1.510.tar.gz The command stalls. It doesn't do anything. Just goes to the next line and no prompt comes up. I have to CTRL-C to get back to the prompt and a ls verifies that it didn't extract anything... My first reaction is that its not a valid tar/gz file or something. But the MD5 matches just fine. So I'm at a loss just a bit...

  Read the article

• Should a sysadmin contractor charge overtime for off-peak hours?

  - by Jakobud

  This is not necessarily a server-related question, but more of a system admin question that I think would related to many on SF. I'm doing Sysadmin/IT consulting for a small company. I only work about 3 days a week for them on average. If a server goes down or something like that during off hours (nights, weekends, 3am, etc) and they need it fixed during those time periods, should I be charging overtime for that? I would I not be justified in charging overtime until I've logged 40 hours for the week? Perhaps calling it overtime isn't the best name. I guess maybe its better to call it an off-peak hourly rate. Anyways I just was curious what other consultants did in these circumstances.

  Read the article

• Can't get DHCPd to assign IPs to unknown clients

  - by Jakobud

  I'm using Webmin to admin our DHCPd server. But I'm having a hard time getting it to assign IP addresses to unknown clients. The only way I can get it to assign an IP is to make sure a host is added to DHCPd as a host so that it gets a static-lease IP assigned to it. I thought "Allow Unknown Clients" was the key, but it still isn't assigning IPs to unknown clients. I have a pool setup so that the unknown clients should get an IP between 10.20.0.200 - 10.20.0.249. Here is the config file. What am I missing here? allow unknown-clients; # Primary DHCP server config authoritative; ddns-update-style none; failover peer "dhcp-failover" { primary; address 10.20.0.30; port 647; peer address 10.20.0.25; peer port 647; max-response-delay 60; max-unacked-updates 10; load balance max seconds 3; mclt 3600; split 128; } subnet 10.20.0.0 netmask 255.255.255.0 { allow unknown-clients; option subnet-mask 255.255.255.0; option broadcast-address 10.20.0.255; option routers 10.20.0.100; option domain-name "ourdomain.com"; option domain-name-servers 192.168.10.20; default-lease-time 86400; max-lease-time 86400; option ntp-servers 192.168.10.20; option time-offset -25200; pool { allow unknown-clients; failover peer "dhcp-failover"; max-lease-time 86400; range 10.20.0.200 10.20.0.249; deny dynamic bootp clients; } host Server-myserver { option host-name "whatever.ourdomain.com"; hardware ethernet 00:89:D4:35:4F:13; fixed-address 10.20.0.23; } }

  Read the article

• Firewalls: What is the difference between Policy, NAT and Routes?

  - by Jakobud

  I'm learning fwbuilder and firewalls in general. I don't understand the differences between Policy, NAT and Routes. They all seem like they are just ways to tell the data where to go depending on what it is and where its coming from. What is the real difference? Is a properly configured firewall taking advantage of all three (Policy, NAT and Routes) or are they just three different ways to accomplish the same thing and you only need one of them?

  Read the article

• FWBuilder DNS Object Run Time - when exactly does it resolve the DNS name?

  - by Jakobud

  In Firewall Builder, when you use the DNS Object and set it to run time, when exactly does the firewall (iptables in our case) actually resolve the DNS name? Is it whenever a call is made to that DNS name in the firewall? So the firewall would resolve the name on the fly whenever someone/something tries to access that DNS name? Or is it when you execute the fw script to load the rules into iptables? So in this case, it would resolve the DNS name that one time and then hard-code the resulting ip address into the iptable rules? From what I read, I think its #1, but it's just not 100% clear to me. We have two servers for a certain function on our network. One is the primary server and one is backup. alpha0.domain.com alpha1.domain.com In DNS we have this: alpha.domain.com -> alpha0.domain.com If the primary server goes down and we need to switch to the backup, I just change our local DNS record to point to alpha1.domain.com instead. So back to the firewall, if I just put in a Domain Object as alpha.domain.com, do I have to reload the firewall rules every time we switch to the backup alpha server and change the DNS record? Or will the firewall automatically resolve to the correct address even after the switch?

  Read the article

• MediaWiki alternatives for small business?

  - by Jakobud

  Are there any good alternative wiki's to MediaWiki out there for a small business? Mostly we are just wanting to use it for documentation. MediaWiki is a fine (and slightly outdated) piece of software, but it doesn't even officially support basic things like controlling who has access to what page/article, which is an important feature for us.

  Read the article

• Graciously shutdown external HDD enclosure?

  - by Jakobud

  I recently purchased a large HDD along with the following HDD enclosure: http://www.newegg.com/Product/Product.aspx?Item=N82E16817173043 It has a simple on-off switch on the back. When I want to turn this thing off, do I simply just flip the switch? I assume the switch simply kills the power to the HDD, but isn't that potentially a bad thing in the case that the HDD is still reading/writing? I used to have a Seagate external HDD and it had a button on the front that I had to hold down for a second or two before it would turn off, but it at least appeared to sort of go through a shutdown procedure where it probably would stop the HDD activity before cutting power. So with this external HDD, I'm a little bit leery about that power switch and understanding exactly what it does. Is this how all HDD enclosures are? EDIT: I'm running the drive in Ubuntu Server. So there is no 'ejecting' the drive lol

  Read the article

• Logging won't stop on log file after renaming/moving it.... how do I stop it?

  - by Jakobud

  Just discovered that logrotate is not rotating our firewall log. So its up to 12g in size. I need to split up the file into smaller chunks and start manually rotating them so I can get things back on track. However before I start splitting the firewall up, I need to stop the firewall from logging to the current firewall log file and force it to start logging to a new empty file. This way I'm not trying to split up or rotate a log file that is still constantly growing. I tried to simply do this: mv firewall firewall.old touch firewall I expected to see the new empty firewall file to start growing in size, but no... the firewall.old is still be logged to. Then I tried to start/stop iptables. No change. firewall.old is still the log file. I tried to move it to another directory. That didn't help. I tried to stop iptables, then change the filename and create a new firewall file and then start iptables again, but no change. How do I stop the logging on this file and force it to start logging on a new file?

  Read the article

• fwbuilder/iptables manually scripted + autogenerated rules at startup?

  - by Jakobud

  Fedora 11 Our previous IT-guy setup iptable rules on our firewall in a way that is confusing me and he didn't document any of it. I was hoping someone could help me make some sense of it. The iptables service is obviously starting at startup, but the /etc/sysconfig/iptables file was untouched (default values). I found in /etc/rc.local he was doing this: # We have multiple ISP connections on our network. # The following is about 50+ rules to route incoming and outgoing # information. For example, certain internal hosts are specified here # to use ISP A connection while everyone else on the network uses # ISP B connection when access the internet. ip rule add from 99.99.99.99 table Whatever_0 ip rule add from 99.99.99.98 table Whatever_0 ip rule add from 99.99.99.97 table Whatever_0 ip rule add from 99.99.99.96 table Whatever_0 ip rule add from 99.99.99.95 table Whatever_0 ip rule add from 192.168.1.103 table ISB_A ip rule add from 192.168.1.105 table ISB_A ip route add 192.168.0.0/24 dev eth0 table ISB_B # etc... and then near the end of the file, AFTER all the ip rules he just declared, he has this: /root/fw/firewall-rules.fw He's executing the firewall rules file that was auto-generated by fwbuilder. Some questions Why is he declaring all these ip rules in rc.local instead of declaring them in fwbuilder like all the other rules? Any advantage or necessity to this? Or is this just a poorly organized way to implement firewall rules? Why is he declaring ip rules BEFORE executing the fwbuilder script? I would assume that one of the first things the fwbuilder script does it get rid of any existing rules before declaring all the new ones. Am I wrong about this? If that was the case, the fwbuilder script would basically just delete all the ip rules that were defined in rc.local. Does this make any sense? Why is he executing all this stuff at startup in rc.local instead of just using iptables-save to keep the firewall settings at /etc/sysconfig/iptables that will get implemented at runtime?

  Read the article

• Automatically distinguish difference between multiple HDDs in linux?

  - by Jakobud

  I'm running Ubuntu Server 9.10. I have two external USB HDDs. I use them each for different backup reasons. So certain data gets stored on one HDD, and different information gets stored on the other HDD. I want to make a script that can look at the external HDD can determine which HDD it is, so that it can copy the proper information to it. Is there a way for Linux to determine this? Like if I see one HDD as /dev/sdc1, then unplug it and plug in the other HDD, should Linux see it as /dev/sdd1 or will it be /dev/sdc1? I'm a bit of a Linux newb and I don't quite understand how it determines the /dev/sdxx values that it assigns to drives.

  Read the article

• CentOS ISO DVD self-disc-check failing

  - by Jakobud

  I downloaded a CentOS 5.4 DVD ISO from one of the official mirrors. The MD5 sum is correct for the iso file that was downloaded. I burned the ISO onto a DVD+R using ImgBurn. I got no errors during the burning process and it says it finished burning successfully. When booting a server using this DVD to install CentOS on it, the first thing I did was run the self-disc-check (where it checks the files to make sure its genuine, etc). It failed. Didn't really say why. Am I doing something wrong here? Or is there someplace I can see why its failing? If the MD5 is correct and I don't get any burning errors, how can it be failing its own self-check mechanism?

  Read the article

• dhcpd: How to tell how many leases are available?

  - by Jakobud

  I'm a little bit new to dhcpd. I'm trying to figure out how many leases we have available on our network. The /var/lib/dhcpd/dhcpd.leases file appears to show almost a history of leases and some of the current leases. Not sure if that really helps me or not... I figured there might be a command or something I'm unaware of that can tell me how many leases are left.

  Read the article

• Is Fedora a bad choice for a server?

  - by Jakobud

  I'm taking over IT responsibilities at a small company. Most of the servers appear to be running various releases of Fedora (file servers, backup servers, oracle servers, etc). I don't have much experience with Fedora, but I was under the impression its geared for end user desktops/workstations/laptops. Is Fedora a bad choice for servers?

  Read the article

• sudo access for desktop actions in Gnome/KDE?

  - by Jakobud

  I feel kinda silly asking this question. I'm using CentOS 5.4 and KDE. I downloaded an archive and I want to drag/drop the contents into a folder that I need root access to write to. I can obviously go into terminal and sudo blah blah. But how do I get sudo access for desktop procedures? Like for simple dragging and dropping of files? KDE just tells me that I don't have permission to do that, but doesn't give me the option of entering the root password or sudo.

  Read the article

• rsyslog server - Can you split up and organize logs?

  - by Jakobud

  I recently setup one of our servers as an rsyslog server. I now have our firewall setup to log everything to that rsyslog server. But there doesn't seem to be an organization of the logs. All the firewall logs are just being dumped into the /var/log/messages on the rsyslog server. I guess I was maybe expecting them to at least be in a machine specific log file or directory. How can I organize the incoming logging? If I setup 20 servers to all log everything to a central rsyslog server, I really don't want everything being dumped into one big file or a few files. How can I setup rsyslog to tell it where to log what? Like if all the logs for a specific server were in it's own directory/file, etc... Is this possible?

  Read the article

• Can generated OpenVPN keys be used on multiple clients?

  - by Jakobud

  We are experimenting with running an OpenVPN server for our business. One question I can't seem to find the answer to is this: When we generate keys for one of our users for them to use at home, can their use the same keys on their home laptop as well as their home desktop? Or do we need to generate separate keys for each user's client machine?

  Read the article

• vsftpd, virtual users and permissions. Avoid using chmod 777?

  - by Jakobud

  I am running vsftpd with Virtual Users (managed through a MySQL db). Each users home/default directory is owned by vsftpd:vsftpd. I need to give a user read/write permissions to some website files, owned by apache:apache so they can make some changes. I did a bind mount for the web directory to a directory in the ftp user's home/default directory. When logging in, the user is not able to write to the web folder, unless I set files to 777. Is it possible to set this up with making the directory and it's files 777? The web directory needs to be apache:apache in order for apache to work with it.

  Read the article

• What is a good web interface for remote linux load monitoring?

  - by Jakobud

  I'm looking for some type of remote linux monitoring software that you can view using a web interface. And I'm not just looking for the basic load information. I'm also looking for process information, similar to the info that you get from TOP. Like I'd just like to be able to pop open this webpage to view whats going on with the server at a moments notice. For example, perhaps just a basic PHP page that is on the server that uses basic AJAX to display and refresh results from the TOP command in the page. I was thinking about writing something like this, but I don't want to reinvent the wheel.

  Read the article

• Apache Virtual host Subdomains points to same directory

  - by Jakobud

  I have setup subdomains using Apache before and have never really ran into any big problems. But with this (I believe Centos) server that is one of my clients, I'm not understanding what I'm doing wrong. Here is the .conf that apache is loading: Listen 80 NameVirtualHost *:80 <VirtualHost *:80> ServerName www.thedomain.com DocumentRoot /u1/thedomain.com/public RailsEnv production </VirtualHost> <VirtualHost *:80> ServerName subdomain.thedomain.com DocumentRoot /u1/subdomain.thedomain.com/public_html </VirtualHost> When I access either the primary or subdomain addresses, they both point to the primary www.thedomain.com content. Any thoughts? UPDATE: Yes I did a configtest and graceful after making the changes.

  Read the article

< Previous Page | 1 2 3  | Next Page >