Search Results

Search found 993 results on 40 pages for 'josh crowder'.

Page 2/40 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

• 32-bit Ubuntu or 64-bit w/Intel Atom D510 w/4GB RAM?

  - by T.J. Crowder

  (I've seen this question and some related ones, and perhaps this is a duplicate although part of my question is specific to the Atom D510.) I'm going to be installing Ubuntu on a new silent desktop as my latest (and hopefully last) attempt to switch from Windows to Linux for at least most everyday tasks. The new machine is entirely passvely cooled, but as a consequence, not astonishingly powerful — an Atom D510 (dual-core, 1.6GHz, HT) on Intel's D510MO board. That's fine, I won't use it for gaming, (much) video editing, etc. It's a 64-bit processor and I'm maxing the board out at 4GB of RAM (hey, that 1.6 CPU needs all the help it can get), which naturally raises the question of whether to install Ubuntu 64-bit or 32-bit (and if the latter, either live with the missing RAM, or do the PAE kernel dance). Although I've used Linux on servers for years, I'm very nearly a Linux desktop newbie and am not currently in the mood to fight driver wars and such. So if I'm setting myself up for failure with 64-bit, I'll live with the missing ~0.8GB or fiddle with PAE. But if 64-bit is entirely "ready," great, I'm there. So: Do most mainstream apps (now) play nicely with 64-bit Linux? I can't help but notice the "AMD" in the ISO image filename ubuntu-10.04-desktop-amd64.iso and I know AMD lead the way on this stuff — does Ubuntu 64-bit play nicely with Intel processors? Just generally, would you recommend one or the other? (And if anyone has any experience with Ubuntu specifically on the D510 [32-bit or 64-bit] which might lead me one way or t'other, that would be useful.) Thanks in advance.

  Read the article

• How easy is it to migrate a Linux VM image from one VM env to another?

  - by T.J. Crowder

  If I stick to one of the standard, well-supported VM disk images (like a raw image, or VDI, VMDK, ...), are Linux VMs typically easy to move between VM environments? E.g., between (say) VirtualBox and KVM, or VMWare and Xen? I'm talking here of fully virtualized environments, not paravirtualization requiring support within the guest OS. It seems to me that the kernels in most Linux distributions these days are configured to...keep an open mind and detect things at boot time, so you don't have the issue that you sometimes have moving a Windows VM from one virtualization system to another (I'm thinking particularly of HAL issues that Windows has, like ACPI vs. non-ACPI; I've also just had Windows VMs generally acting strangely when moved from VMWare to VirtualBox, for instance). I'm looking for a general answer, but if it helps, specifically I'm mostly going to be doing this with Ubuntu 8.04 LTS and 10.04 LTS guests. But that could change.

  Read the article

• Remote NX login to Ubuntu, Gnome can't mount CD/DVD drive

  - by T.J. Crowder

  Even though I'm sitting next to it, I log into my Ubuntu 10.04 LTS system via NX Free Edition from another system at the moment (this is temporary, not worth buying a KVM for). Curiously, though, when I do that Gnome's auto-mounting fails for CD/DVD media (I haven't tried other kinds) with a "Not Authorized" error. For instance here's what happens when I put the Ubuntu 10.04 LTS installation CD in: This does not happen if I log into it locally (not via NX) with the same user account. When using NX, I can mount the media if I go to mount directly: tjc@midnight:~$ sudo mkdir /media/dvd tjc@midnight:~$ sudo mount -r -t iso9660 /dev/sr0 /media/dvd tjc@midnight:~$ ls /media/dvd autorun.inf casper dists install isolinux md5sum.txt pics pool preseed README.diskdefines ubuntu wubi.exe ...which, along with the "not authorized" error, suggests some kind of permissions problem to me (doh). What I find odd is that the same user is involved in both cases (local and via NX). I'm new to Ubuntu on the desktop (used it and other distros on servers for years), so I'm afraid I don't know how this auto-mounting is happening. I think it's handled by the gvfs package and its daemon, but that's about as far as I got (and perhaps I've taken a left turn even getting that far). Although I can work around it with mount, does anyone know how I might get auto-mounting to work?

  Read the article

• Intel D510MO board - 1000Mbit LAN or not?

  - by T.J. Crowder

  The Intel forum seems to be down (signing in fails with connection refused), but perhaps someone here knows the answer. The Intel D510MO product page says that the LAN is 10/100/1000, but when I look at the NM10 chipset it uses, it says it's just 10/100 (and the detailed PDF spec here backs that up pretty definitively). I don't immediately see anything saying the D510MO has a different LAN controller than the NM10's onboard one, and it would seem odd if it did given the purpose of the board (low power, small footprint; integrated). Does this board support 1000Mbit LAN or not? Anyone have direct knowledge of it? Thanks in advance.

  Read the article

• How to get rid of a stubborn 'removed' device in mdadm

  - by T.J. Crowder

  One of my server's drives failed and so I removed the failed drive from all three relevant arrays, had the drive swapped out, and then added the new drive to the arrays. Two of the arrays worked perfectly. The third added the drive back as a spare, and there's an odd "removed" entry in the mdadm details. I tried both mdadm /dev/md2 --remove failed and mdadm /dev/md2 --remove detached as suggested here and here, neither of which complained, but neither of which had any effect, either. Does anyone know how I can get rid of that entry and get the drive added back properly? (Ideally without resyncing a third time, I've already had to do it twice and it takes hours. But if that's what it takes, that's what it takes.) The new drive is /dev/sda, the relevant partition is /dev/sda3. Here's the detail on the array: # mdadm --detail /dev/md2 /dev/md2: Version : 0.90 Creation Time : Wed Oct 26 12:27:49 2011 Raid Level : raid1 Array Size : 729952192 (696.14 GiB 747.47 GB) Used Dev Size : 729952192 (696.14 GiB 747.47 GB) Raid Devices : 2 Total Devices : 2 Preferred Minor : 2 Persistence : Superblock is persistent Update Time : Tue Nov 12 17:48:53 2013 State : clean, degraded Active Devices : 1 Working Devices : 2 Failed Devices : 0 Spare Devices : 1 UUID : 2fdbf68c:d572d905:776c2c25:004bd7b2 (local to host blah) Events : 0.34665 Number Major Minor RaidDevice State 0 0 0 0 removed 1 8 19 1 active sync /dev/sdb3 2 8 3 - spare /dev/sda3 If it's relevant, it's a 64-bit server. It normally runs Ubuntu, but right now I'm in the data centre's "rescue" OS, which is Debian 7 (wheezy). The "removed" entry was there the last time I was in Ubuntu (it won't, currently, boot from the disk), so I don't think that's not some Ubuntu/Debian conflict (and they are, of course, closely related). Update: Having done extensive tests with test devices on a local machine, I'm just plain getting anomalous behavior from mdadm with this array. For instance, with /dev/sda3 removed from the array again, I did this: mdadm /dev/md2 --grow --force --raid-devices=1 And that got rid of the "removed" device, leaving me just with /dev/sdb3. Then I nuked /dev/sda3 (wrote a file system to it, so it didn't have the raid fs anymore), then: mdadm /dev/md2 --grow --raid-devices=2 ...which gave me an array with /dev/sdb3 in slot 0 and "removed" in slot 1 as you'd expect. Then mdadm /dev/md2 --add /dev/sda3 ...added it — as a spare again. (Another 3.5 hours down the drain.) So with the rebuilt spare in the array, given that mdadm's man page says RAID-DEVICES CHANGES ... When the number of devices is increased, any hot spares that are present will be activated immediately. ...I grew the array to three devices, to try to activate the "spare": mdadm /dev/md2 --grow --raid-devices=3 What did I get? Two "removed" devices, and the spare. And yet when I do this with a test array, I don't get this behavior. So I nuked /dev/sda3 again, used it to create a brand-new array, and am copying the data from the old array to the new one: rsync -r -t -v --exclude 'lost+found' --progress /mnt/oldarray/* /mnt/newarray This will, of course, take hours. Hopefully when I'm done, I can stop the old array entirely, nuke /dev/sdb3, and add it to the new array. Hopefully, it won't get added as a spare!

  Read the article

• Simple end-to-end load and bottleneck monitoring for DB-based web sites

  - by T.J. Crowder

  What tools do you use / would you recommend for monitoring a Linux-based, DB-based website's servers for bottlenecks and load? The obvious goal being to know when growth has gotten to the point where it's necessary to scale up (or out) one or more of the bits and pieces because the current system won't be managing the load if an observed trend continues. I'm looking for general recommendations based on standard Linux load metrics, disk I/O metrics, network I/O metrics, etc., but if specifics are helpful: It'll be Tomcat6 using APR (possibly with a Varnish or similar caching and balancing front-end), MySQL, and either Ubuntu 8.04 LTS or 10.04 LTS depending on timing. I know about top, vmstat, iostat, bwmon and the like that collect and parse info from the /proc file system (et. al.); and obviously MySQL provides a lot of queriable performance information. I could use those directly, probably automating periodic monitoring logs with scripts and such. But I have a suspicion that I'd be reinventing a wheel... For example, Hyperic HQ seems to be along the lines of what I'm looking for. Others? Meta: I tend to think of "recommendation" questions as needing to be CW because there's no one right answer, but I see a lot of these here that aren't CWs, so I haven't marked it as one. I'll happily do so if enough people think I should.

  Read the article

• What would make a noise in a PC on graphics operations on a passively-cooled system?

  - by T.J. Crowder

  I have this system based on the Intel D510MO motherboard, which is basically an Atom D510 (dual-core HT Atom w/built-in GPU), an Intel NM10 chipset, and a Realtek Gigabit LAN controller. It's entirely passively cooled. I noticed almost immediately that there was a kind of very, very soft noise that corresponded with graphics operations, sort of the noise you'd get if you had a sheet of flat paper and slid something really light across it — but more electronic than that. I wrote it off as observation error and/or disk activity triggered by the graphics operation (although the latter seemed like a lot of unnecessary disk activity). It isn't. I got curious enough that I finally did a few controlled experiments, and here's what I've determined: It isn't the HDD. For one thing, the sounds the HDD makes (when seeking, when reading or writing, when just sitting there spinning) is different. For another, I used sudo hdparm -y /dev/sda (I'm using Ubuntu 10.04 LTS) to temporarily put the disk on standby while making sure that non-disk graphics op was happening in a loop. The disk spun down, but the other sound continued, corresponding perfectly with the timing of the graphics op. (Then the disk spun up again, but it takes long enough that I could rule out the HDD.) It isn't the monitor; I ensured the two were well physically-separated and the sound was definitely coming from the main box. It isn't something else in the room; the sound is coming from the box. It isn't cross-talk to an audio circuit coming out the speakers. (It doesn't have any speakers.) It isn't my mouse (e.g., when I'm trying to make graphics ops happen); the sound happens if I set up a recurring operation and don't use the mouse at all, or if I lift the mouse off the table slightly (but enough that the laser still registers movement). It isn't the voices in my head; they never whisper like that. Other observations: It doesn't seem to matter what the graphics operation is; anything that changes what's on the screen seems to do it. I get the sound when moving the mouse over the Chromium tab bar (which makes the tab backgrounds change); I get it when a web page has a counter on it that changes the text on the page: I get it when dragging window contents around. The sound is very, very slightly louder if the graphics op is larger, like scrolling a text area when writing a question on superuser.com, than for smaller operations like the tick counter on the web page. But it's very slight. It's fairly loud (and of good duration) when the op involves color changes to substantial surface areas. For instance, when asking a question here on superuser and you move the cursor between the question box and the tag box, and the help to the right fades out, changes, and fades back in. (Yet another example related to the web browser, so let me say: I hear it when operations completely unrelated to the web browser as well.) It doesn't sound like arcing or anything like that (I'd've shut off the machine Right Quick Like if it did). Moving windows does it. Scrolling windows (by and large) doesn't. I have the feeling I've heard this sort of thing before, when all system fans were on low and such, with other systems — but (again) written it off as observational error. For all the world it's like I'm hearing the CPU working (as opposed to the GPU; note the window scroll thing above) or data being transferred somewhere, but that just seems...unlikely. So what am I hearing? This may seem like a very localized question, but perhaps other silent PC enthusiasts may be interested as well...

  Read the article

• Will just a couple of thermal "trip" shutdowns typically damage a CPU?

  - by T.J. Crowder

  The short version If a CPU gets so hot that the system turns itself off because of a thermal trip signal just a couple of times, is it likely that the CPU will be damaged? Or does the trip do its job, turning it off before the CPU gets damaged? (This is with all default settings in the BIOS; I haven't raised any temp thresholds or overclocked anything.) The longer version I just got this Intel Atom D510-based fanless system, installed a 2.5" mobile SATA drive and two 2GB PC2-6400s, closed it up, and having checked everything was recognized in the BIOS, set about installing Ubuntu. After a couple of false starts related, I think, to the external DVD drive I was using, I got the install happily running along. About three-fourths or so of the way through the install, having been running less than an hour, the machine turned itself off. I was actually out of the room at the time, but when I came back and turned it back on, it said it had shut down due to a thermal event. I went into the BIOS and saw that (at that point, having just been turned back on after a couple of minutes off), it was running 87C. As near as I can tell from Intel's docs (PDF here), the max "junction" temperature for the CPU is 100C and it will raise a THERMTRIP signal at 125C. Yowsa. Presumably there will be some back-and-forth with the vendor on this, I'm just wondering whether letting it get that hot a couple of times is likely to end up damaging it.

  Read the article

• CPU load, USB connection vs. NIC

  - by T.J. Crowder

  In general, and understanding the answer may vary by manufacturer and model (and driver, and...), in consumer-grade workstations with integrated NICs, does the NIC rely on the CPU for a lot of help (as is typically the case with a USB controller, for instance), or is it fairly intelligent and capable on its own (like, say, the typical Firewire controller)? Or is the question too general to answer? (If it matters, you can assume Linux.) Background: I'm looking at connecting a device (digital television capture) that will be delivering ~20-50 Mbit/sec of data to a somewhat under-powered workstation. I can get a USB 2 High-speed device, or a network-attached device, and am interested in avoiding impacting the CPU where possible. Obviously, if it's a 100Mbit NIC, that's roughly half its theoretical inbound bandwidth, whereas it's only roughly a tenth of the 480 Mbit/second the USB 2 "High Speed" interface. But if the latter requires a lot of CPU support and the former doesn't...

  Read the article

• Hot-swap drive got new name, can I change it on-the-fly?

  - by T.J. Crowder

  One of the HDDs in my server's RAID config failed, so I took it out of the array and had the data center hot-swap it. They've done that, but now the new drive is /dev/sdc rather than /dev/sda. I suspect — correct me if I'm wrong — that if I reboot the server, it will be /dev/sda again, so I'm hesitant to add it back to the array as /dev/sdc because I don't want to lay a trap for myself to fall into on the next reboot. I'd just as soon not reboot the server if I don't need to (if I do need to, well, too bad for me). Is there a way I can change the device name from /dev/sdc to /dev/sda without rebooting? This is on Ubuntu 10.04 LTS. It's an md array ("Linux Software RAID"), where currently one of the devices (there are a couple of them) looks like this ("degraded" because I've removed the old /dev/sda from it): # mdadm --detail /dev/md0 /dev/md0: Version : 00.90.03 Creation Time : Sun Oct 11 21:07:54 2009 Raid Level : raid1 Array Size : 97536 (95.27 MiB 99.88 MB) Used Dev Size : 97536 (95.27 MiB 99.88 MB) Raid Devices : 2 Total Devices : 1 Preferred Minor : 0 Persistence : Superblock is persistent Update Time : Thu Jun 30 09:31:16 2011 State : clean, degraded Active Devices : 1 Working Devices : 1 Failed Devices : 0 Spare Devices : 0 UUID : 496be7a5:ab9177ed:7792c71e:7dc17aa4 Events : 0.112 Number Major Minor RaidDevice State 0 8 17 0 active sync /dev/sdb1 1 0 0 1 removed Thanks, Update: Reading through the kernel md documentation, I suspect that if the name changes on reboot, it won't matter. (Good design, that.) Here's why: Boot time autodetection of RAID arrays When md is compiled into the kernel (not as module), partitions of type 0xfd are scanned and automatically assembled into RAID arrays. This autodetection may be suppressed with the kernel parameter "raid=noautodetect". As of kernel 2.6.9, only drives with a type 0 superblock can be autodetected and run at boot time. The kernel parameter "raid=partitionable" (or "raid=part") means that all auto-detected arrays are assembled as partitionable. I do have md compiled into the kernel, so I'm rebuilding the array now and will do the reboot to see what happens. Even if it works, the above doesn't answer the question I actually asked, so unless someone comes along and answers that question in the meantime (I'd be interested, even if it's not necessary for what I'm doing this very moment), I'll just delete the question to keep noise down.

  Read the article

• Setting static IP on CentOS without system-config-network

  - by Josh

  Background information: I have a problem installing system-config-network. It appears it cannot find an update to sqlite (checks every mirror and comes back empty handed.) I have tried the skipping broken option and package cleanups from yum-utils. Since I cannot get it installed, I decided to set an ip manually from console. A quick Google search comes back empty handed as for an easy how-to guide that works. What do I need to do for a currently configured DHCP ip to change it to a Static IP from console. Thanks, Josh

  Read the article

• Best Practice: iDRAC & NIC Selection

  - by Josh Brower

  I am setting up a new Dell server with iDRAC 6 Express. My options for the NIC are: 1) Shared 2) Shared with failover to LOM2 3) Shared with failover to all LOMs The server has 2x dual-nic PCI-E cards (total of 4 nics) My questions are thusly: -What is best practice for setting this up? Is there any reason why I would not want option 3? -If the NIC is being used for both iDRAC and the OS, (there is no dedicated iDRAC nic), does this ever cause any kinds of issues for either iDRAC or the OS? Thanks- -Josh

  Read the article

• Apache Slow Over http, Fast Over https

  - by Josh Pennington

  I have an Apache server running Debian. I am having this very strange situation where loading a page takes about 2 to 3 times longer to load over http than https. The primary use of the website is Magento, but I am seeing similar results with other things that we have loaded on the website. I don't have the first clue where to even look on our server or what the problem could be. Does anyone have any insight as to what could be going on or where to look. Josh

  Read the article

• Useless Plesk Error?

  - by Josh Pennington

  I am trying to determine why Plesk on my server won't start and I have no idea where to even start (since my hosting company appears to not want to help me out). Anyways, the error in my Plesk error_log is as follows: 2010-12-25 21:30:28: (log.c.75) server started 2010-12-25 21:30:28: (network.c.336) SSL: error:00000000:lib(0):func(0):reason(0) 2010-12-25 21:30:28: (log.c.75) server started 2010-12-25 21:30:28: (network.c.336) SSL: error:00000000:lib(0):func(0):reason(0) It leads me to believe its a problem with the SSL on the server but I am not sure what to make of the error. Can someone lead me in the right direction? Thanks Josh Pennington

  Read the article

• secure email crashes outlook 2007

  - by Josh

  I have a number of secure emails sent to my outlook 2007 client. most arrive fine and display the prompt with regards to granting access to the certificate and then open. today i received two that when i try and open them they crash outlook. i have tried restarting outlook and my computer. please can you give me some ideas of what it could be or how i can troubleshoot this issue. i am working on Vista Utlimate x64. thanks. Josh

  Read the article

• Where is the Plesk Error Log / Or how can I get Plesk running again?

  - by Josh Pennington

  I currently have a VPS that is running Plesk and for some unknown reason it will not start. All the more information it gives me about it not starting is the following: Operation start with the VPS(s) VEID54635644 service "psa" is finished with errors: #703 Can not start/stop/restart service: service "psa" status is not "running" after command "start". This does really mean anything to me. Currently my server provider does not seem interested in helping me get Plesk running again so I am hoping I can get this going again on my own. I am assuming that there has to be an error log SOMEWHERE for Plesk, but the only thing I can find is located at /usr/local/psa/admin/logs/httpds_access_log and that just looks like an access log, not an error log (it is the only file in the directory). Is there another log somewhere in the system for this that I do not know about? Is there a way to find out why Plesk did not start? Thanks Josh Pennington

  Read the article

• Aironet 1200's Auto-Channel Feature: When should it be used?

  - by Josh Brower

  In our building we have around 25 1200 series Aironets, with a bit of overlap in some areas. Up until this point, we have had them deployed in alternating 1/6/11 channels, but we are wondering if we would get better performance if we used the auto-channel select feature. In looking around, I have seen comments that this feature should not be used as the WAP does a channel scan only on the radio startup, but I have not found this in any Cisco docs. Anybody have anymore information, or real-world experience with this feature? Thanks! -Josh

  Read the article

• System Monitoring Redundancy

  - by Josh Brower

  I consult in a small business environment where I have two HyperV hosts (with <10 VMs) + a couple other servers. I recently had an issue where one of the HyperV hosts had a CPU issue and it came down, bringing most of my non-critical VMs with it, plus a free piece of software that I use for network & system monitoring and availability. Because of this, and the fact that iDRAC locked up to, I did not get any alerts about the crash. So I am wondering how I can (cheaply) get a redundant availability monitoring system in place--Is is as simple as running Nagios or Zenoss (or whatever) on two different HyperV hosts? It just seems like running more than one copy of Nagios/Zenoss/etc could be expensive and have high overhead. Thoughts? Thanks! -Josh

  Read the article

• Boot to VHD backup plan

  - by Josh Barker

  I have a machine that I just reinstalled Windows and all of my applications onto... what a chore that is. I want to totally and completely avoid this from now on by creating an image. My first thought was to see if it possible to copy a VHD file when you are booted into it since I am using Windows 7 Ultimate as boot-to-vhd (without a parent machine). Is this possible and if so, how could I accomplish this? Keep in mind, this is my personal machine and I'm trying to keep things inexpensive (a good script would work). Thanks, Josh

  Read the article

• /proc/pid/environ missing variables

  - by Josh Arenberg

  google is giving no love on this one today, so I turn to the experts... I'm currently hacking together a script that relies on the /proc/pid/environ feature in Linux (RHEL 4) to check for a particular environment variable. Trouble is, it seems certain environment variables aren't showing up in there for some reason. Example: create some test vars: $ export T_1=testval TEST_1=testval T=testval TESTING_LONGEST=testval open a subshell: $bash $ cat /proc/self/environ|tr "\0" "\n"|grep testval TESTVARIABLE_LONGEST=testval T=testval hmm... where did T_1 and TEST_1 go?? what rules govern this strange universe? Thanks in advance, Josh

  Read the article

• sqlite3-ruby can't make on rvm 1.8.7

  - by Josh Crews

  Upgrading to Rails 3 by starting with RVM 1.8.7. OSX 10.5.8 Output: josh-crewss-macbook:~ joshcrews$ gem install sqlite3-rubyBuilding native extensions. This could take a while...ERROR: Error installing sqlite3-ruby: ERROR: Failed to build gem native extension. /Users/joshcrews/.rvm/rubies/ruby-1.8.7-p174/bin/ruby extconf.rb checking for sqlite3.h... yes checking for sqlite3_libversion_number() in -lsqlite3... yes checking for rb_proc_arity()... no checking for sqlite3_column_database_name()... no checking for sqlite3_enable_load_extension()... no checking for sqlite3_load_extension()... no creating Makefile make gcc -I. -I. -I/Users/joshcrews/.rvm/rubies/ruby-1.8.7-p174/lib/ruby/1.8/i686-darwin9.8.0 -I. -I/usr/local/include -I/opt/local/include -I/usr/include -D_XOPEN_SOURCE -D_DARWIN_C_SOURCE -fno-common -g -O2 -fno-common -pipe -fno-common -O3 -Wall -Wcast-qual -Wwrite-strings -Wconversion -Wmissing-noreturn -Winline -c database.c database.c: In function ‘deallocate’: database.c:17: warning: implicit declaration of function ‘sqlite3_next_stmt’ database.c:17: warning: assignment makes pointer from integer without a cast database.c: In function ‘initialize’: database.c:76: warning: implicit declaration of function ‘sqlite3_open_v2’ database.c:79: error: ‘SQLITE_OPEN_READWRITE’ undeclared (first use in this function) database.c:79: error: (Each undeclared identifier is reported only once database.c:79: error: for each function it appears in.) database.c:79: error: ‘SQLITE_OPEN_CREATE’ undeclared (first use in this function) database.c: In function ‘set_sqlite3_func_result’: database.c:277: error: ‘sqlite3_int64’ undeclared (first use in this function) database.c: In function ‘rb_sqlite3_func’: database.c:311: warning: passing argument 1 of ‘ruby_xcalloc’ as signed due to prototype database.c: In function ‘rb_sqlite3_step’: database.c:378: warning: passing argument 1 of ‘ruby_xcalloc’ as signed due to prototype make: *** [database.o] Error 1 Gem list (these are under RVM, under system I've got lot more gems included the sqlite3-ruby that's worked for 1.5 years) josh-crewss-macbook:~ joshcrews$ gem list *** LOCAL GEMS *** abstract (1.0.0) actionmailer (3.0.0.beta3) actionpack (3.0.0.beta3) activemodel (3.0.0.beta3) activerecord (3.0.0.beta3) activeresource (3.0.0.beta3) activesupport (3.0.0.beta3, 2.3.8) arel (0.3.3) builder (2.1.2) bundler (0.9.25) capybara (0.3.8) configuration (1.1.0) cucumber (0.7.2) cucumber-rails (0.3.1) culerity (0.2.10) database_cleaner (0.5.2) diff-lcs (1.1.2) erubis (2.6.5) ffi (0.6.3) gherkin (1.0.30) i18n (0.4.0, 0.3.7) json_pure (1.4.3) launchy (0.3.5) mail (2.2.1) memcache-client (1.8.3) mime-types (1.16) nokogiri (1.4.2) polyglot (0.3.1) rack (1.1.0) rack-mount (0.6.3) rack-test (0.5.4) rails (3.0.0.beta3) railties (3.0.0.beta3) rake (0.8.7) rdoc (2.5.8) rspec (2.0.0.beta.10, 2.0.0.beta.8) rspec-core (2.0.0.beta.10, 2.0.0.beta.8) rspec-expectations (2.0.0.beta.10, 2.0.0.beta.8) rspec-mocks (2.0.0.beta.10, 2.0.0.beta.8) rspec-rails (2.0.0.beta.10, 2.0.0.beta.8) rubygems-update (1.3.7) selenium-webdriver (0.0.20) spork (0.8.3) term-ansicolor (1.0.5) text-format (1.0.0) text-hyphen (1.0.0) thor (0.13.6) treetop (1.4.8) trollop (1.16.2) tzinfo (0.3.22) webrat (0.7.1) Version of XCode: 3.1.1 My suspicion is it has to do with "-I/Users/joshcrews/.rvm/rubies/ruby-1.8.7-p174/lib/ruby/1.8/i686-darwin9.8.0", because i686-darwin9.8.0 doesnt exist in that file

  Read the article

• Papervision3D: Making Object Appear Still When Moving Camera

  - by Josh

  I'd like to keep an object appear to remain in the same place while moving the camera. I'm using this script http://pv3d.org/2008/11/19/dragging-mouse-for-camera-orbit/ to orbit an object using a mouse drag. But I have an object in the scene that I would like to keep still. How to I do this? Thanks, Josh

  Read the article

• Yii PHP Framework- Implementation

  - by Josh

  I was just curious if Yii is supposed to be compiled into PHP or not. Is it possible to use Yii just by copying the Framework to a folder on the server and then including something (something as in one of the yii files- I am not sure how it works) in the scripts I wish to use the framework for? (Noob when it comes to frameworks and usage) Thanks, Josh

  Read the article

• Rails: Showing the latest deploy date in web app.

  - by Josh Pinter

  I'd like to show in our app when the latest production deploy was made, as a means of showing an ongoing commitment to improvement, etc, etc. Off the top of my head I'm thinking of getting a last_updated_at from one of the files, but I'd like to hear other thoughts. What's the best way to get the date of the latest production deploy dynamically? Thanks, Josh

  Read the article

• Detect if images have loaded in a UIWebView?

  - by Josh Gare

  Hey, I have a UIWebview that is loading an image. However I am trying to call a method when the image has completed loaded / rendered. I tried using UIWebViewDelgate and used, -(void)webViewDidFinishLoad:(UIWebView *)webView {} However this method is called before the image has loaded / rendered. How can I fix this. Any help would be greatly appreciated. Josh

  Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >