Search Results

Search found 52 results on 3 pages for 'syslinux'.

Page 2/3 | < Previous Page | 1 2 3  | Next Page >

• Running UBUNTU from a USB Flash drive on Acer

  - by Byron Blue

  I've made a bootable USB flash drive to run UBUNTU. The drive works fine on MOST laptops/computers I try: It does not want to start on my (favourite) Acer Aspire 5745 (Windows 7 64 bit). The opening screen has SYSLINUX 4.06 EDD 4.06-pre1 (...) and simply sits there. I was using UBUNTU 12.04.1 64 bit until I tried booting to the Acer this morning. I've tried booting to 10.04 as well (saw this as a fix on a discussion) with the same result. I really want to use the Acer for development and do not want to wipe my Windows 7 from the hard disk. Are there any solutions/answers?

  Read the article

• not booting from usb or cd

  - by Raymond

  I am trying to install linux on my laptop, a Toshiba Satellite C6550-S5200. I did it once but something happened so I removed it then I had to destroy all data on hard drive so now I have nothing on it. Well I got a iso file burned to a CD and to a flash drive. With the flash drive I get. SYSLINUX 4.06 EDD 4.06-pre7 Copyright (C) 1994-2012 H. Peter Anvin et al With the CD it will start booting it but somewhere loading it up, the dots turn all orange and stay that way and my CD drive turns quiet. Oh and some more info the images work because I tried loading them up on another pc and it worked just fine.

  Read the article

• Trying to boot from usb

  - by iron

  I have similar issues but none with the 12.04 build. Im trying this on a dell d610 laptop with a bad hard drive and was told i could just directly boot from the usb drive. Im using an 8g usb drive and i have tried using the uui tool and get this message. SYSLINUX 4.06 EDD 4.06-pre1 Copyright (c) 1994-2011 H.Peter Anvinet al ERROR: No configuration file found No DEFAULT or UI configuration directive found! Then i tried using unetbootin and got the bootup screen with only the default option and it would say auto boot with a 10 sec countdown and start over again. I do have the boot sequence for usb first.

  Read the article

• Getting "boot error" when trying to boot from USB

  - by Jon Ball

  I'm wanting to try out Ubuntu, so followed the instructions for how to install Ubuntu onto a USB. I downloaded the .iso file, then the pendrivelinux 3 part process to make the USB bootable. I can see what looks like a full list of files on the USB (including the wubi.exe application and the syslinux folder). When I try to restart the computer with the USB in, I get the Dell start up screen, and then a black screen with "Boot Error" in the top right hand corner. Setup options (default) are to boot from Removable Device, then Hard Disc. USB is brand new, straight out of the packet. Computer: Dell Inspiron 530S BIOS: 1.0.13 OS: Windows Vista Home Edition USB: EMTEC 8Gb, formatted to FAT32 I've tried some of the tips in other help topics (holding down CTRL key while restarting, removing all other USB devices). I tried to reformat the USB to something other than FAT32, but my only other options were NTFS or exFAT (not FAT16 which was suggested in another topic).

  Read the article

• Ubuntu not booting from USB on laptop (no optical drive)

  - by Jamie

  I'm using a Kingston 16GB USB, with the Unetbootin program. (I've tried both downloading the installation iso manually and adding it, or using the program to download.) I've tried creating the bootable USB on an iMac, the laptop and also a desktop. I've booted into the setup of the laptop and changed the boot order to make sure it boots from that drive first. (There is no optical drive so that isn't a problem.) It's an Acer Aspire AS3810TZ. Upon booting it gives this message: SYSLINUX 4.03 2010-10-22 EDD Copyright (C) 1994-2010 H. Peter Anvin et al I get this no matter how I create the USB, it just sits there. I left the laptop for an hour and it hadn't moved. I've also tried on a different 4GB USB (Generic) and that did the same.

  Read the article

• What can I change/investigate where the install does not complete?

  - by tunist

  I have already successfully installed Ubuntu 10.10 on my laptop and it works fine. I attempted to get my desktop PC to dual boot Windows and Ubuntu but found that neither the 32 or 64 bit install images will boot/install successfully. The startup script locks on 'initializing core #2' (or 1 or 3).. once I saw it say 'ok' at the end but it still locks there. I have tried to change the boot sequence by inserting 'debug' and 'acpi-off' into txt.cfg in both isolinux and syslinux folders but no changes were obvious during the boot.. as far as it got. The pc is built with an abit IP35 motherboard and nvidia 8600GT gfx card. Does anyone have any suggestion of what else I can change to get the install working?

  Read the article

• no ui or default configuration found?

  - by user51447

  I created a custom Ubuntu 11.10 amd64 desktop based distro using remastersys, but whenever I try to boot using the iso file in vmware, it shows this error : no ui or default configuration found I've tried changing the name of isolinux to syslinux but that didnt help me either! I also tried using unetbootin but it also doesnt boot, and tried every possible but to no avail. There is a similar question but it is about 10.10 and 32 bit, but that didnt solve my query and also as this is a custom distro, the solution could be different. I've also tried creating images using remastersys again and again but that wont help either. Please help me its very urgent!

  Read the article

• Can't figure out how to make Slitaz USB persistent

  - by Dennis Hodapp

  I installed Slitaz on my USB. However I can't figure out how to make it persistent automatically. There are different sources telling me different ways to make it persistent. One told me to add "slitaz home=usb" to the syslinux.cfg file like this: append initrd=/boot/rootfs.gz rw root=/dev/null vga=normal autologin slitaz home=usb but it didn't work for me. http://www.slitaz.org/en/doc/handbook/liveusb.html gave an example of how to do it manually but I didn't try it and I also want it to happen automatically. custompc.co.uk/features/602451/make-any-pc-your-own-with-linux-on-a-usb-key.html is an older article that also explains how to make the USB persistent but I don't want to try it cause it looks outdated (from 2008) does anyone know the best way to make the USB automatically persistent?

  Read the article

• gparted won't boot from liveCD

  - by ant2009

  Hello, Fedora 12 2.6.32.9-70.fc12.i686 I downloaded the gparted iso and burnt it to a CD. gparted-live-0.5.2-1 This GParted Live was created by: create-gparted-live -l en -b u -e e -d sid -m http://free.nchc.org.tw/debian -s http://free.nchc.org.tw/debian-security -g http://free.nchc.org.tw/drbl-core -n 2.6.32-3 -i 0.5.2-1 The files and folders: isolinux live syslinux COPYING GParted-Live-Version I put the disk in and reboot. Nothing happens. I just get a flashing cursor in the top left hand corner. I then have to switch of the power button to get it to reboot. I have done this a number of time and the results are the same. Can anyone tell me how to boot from the gparted liveCD? Many thanks for any suggestions,

  Read the article

• Ubuntu only boots with USB plugged in

  - by Ben

  I'm new to the Linux world so please bear with me! :-) I installed Ubuntu via USB drive onto my hard drive. If I boot the PC without the usb drive I used, Ubuntu will not load. After booting I can unplug without any consequences. I looked on the hard drive and there is a boot folder. On the USB drive, this is the tree contents: /media/disk$ tree . |-- adtext.cfg |-- boot.cat |-- f10.txt |-- f1.txt |-- f2.txt |-- f3.txt |-- f4.txt |-- f5.txt |-- f6.txt |-- f7.txt |-- f8.txt |-- f9.txt |-- initrd.gz |-- isolinux.bin |-- isolinux.cfg |-- ldlinux.sys |-- linux |-- menu.c32 |-- menu.cfg |-- po4a.cfg |-- prompt.cfg |-- splash.png |-- stdmenu.cfg |-- syslinux.cfg |-- text.cfg |-- ubnfilel.txt |-- ubnpathl.txt `-- vesamenu.c32 Am I correct in my assumption that the boot aspect is associated to the USB drive? If so, how do I get it to boot without the USB? I'm guessing copying into some location and modifying grub?

  Read the article

• How do you create a bootable partition on a USB drive?

  - by Nathan DeWitt

  I have a bootable ISO designed to be burned to a double-layer DVD. I don't have a double layer DVD burner, so I would like to stick the ISO image on a 50 GB partition on a USB hard drive I have. How do I get the boot info onto the hard drive? If it helps, it's an OSx86 Live CD. Attempt 1: booted into Ubuntu 9.04 LiveCD deleted the partition on my existing USB hard drive sudo dd if=/path/to/image.iso of=/dev/MyUSB booted to USB drive error: Error Loading OS Atempt 2: booted into Ubuntu 9.04 LiveCD deleted the partition on my existing USB hard drive sudo mkdosfs -I -v -n iPC /dev/MyUSB sudo syslinux /dev/MyUSB sudo dd if=/path/to/image.iso of=/dev/MyUSB booted to USB drive error: Selected boot device not available - strike F1 to retry boot, F2 for setup utility

  Read the article

• Can't figure out how to make Slitaz USB persistent

  - by Dennis Hodapp

  I installed Slitaz on my USB. However I can't figure out how to make it persistent automatically. There are different sources telling me different ways to make it persistent. One told me to add "slitaz home=usb" to the syslinux.cfg file like this: append initrd=/boot/rootfs.gz rw root=/dev/null vga=normal autologin slitaz home=usb but it didn't work for me. http://www.slitaz.org/en/doc/handbook/liveusb.html gave an example of how to do it manually but I didn't try it and I also want it to happen automatically. custompc.co.uk/features/602451/make-any-pc-your-own-with-linux-on-a-usb-key.html is an older article that also explains how to make the USB persistent but I don't want to try it cause it looks outdated (from 2008) does anyone know the best way to make the USB automatically persistent?

  Read the article

• How to boot live iso images?

  - by virpara

  I found that it can be done with loopback as follows menuentry "Lucid ISO" { loopback loop (hd0,1)/boot/iso/ubuntu-10.04-desktop-i386.iso linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/boot/iso/ubuntu-10.04-desktop-i386.iso noprompt noeject initrd (loop)/casper/initrd.lz } But it works only with ubuntu or its derivatives. How it should be written if I want to boot other live images like fedora, cent, opensuse etc. ? Edit: I found some other entries but all of them are probably debian based. menuentry "Linux Mint 10 Gnome ISO" { loopback loop /linuxmint10.iso linux (loop)/casper/vmlinuz file=/cdrom/preseed/mint.seed boot=casper initrd=/casper/initrd.lz iso-scan/filename=/linuxmint10.iso noeject noprompt splash -- initrd (loop)/casper/initrd.lz } menuentry "DBAN ISO" { loopback loop /dban.iso linux (loop)/DBAN.BZI nuke="dwipe" iso-scan/filename=/dban.iso silent -- } menuentry "Tinycore ISO" { loopback loop /tinycore.iso linux (loop)/boot/bzImage -- initrd (loop)/boot/tinycore.gz } menuentry "SystemRescueCd" { loopback loop /systemrescuecd.iso linux (loop)/isolinux/rescuecd isoloop=/systemrescuecd.iso setkmap=us docache dostartx initrd (loop)/isolinux/initram.igz } Edit2: How to chainload grub and syslinux from grub2? Edit3: I want to boot other live images without any removable devices and use grub2 so need menu entries specific to grub2.

  Read the article

• How do install Ubuntu from a USB stick?

  - by Sophia

  When I go to the boot menu on my computer and select USB stick, the screen goes black and there comes a flickering underline. Like I could write something. But I can't. Whatever I push, nothing happens. Except the PrintScrn/SysRq button. When I push it, mu computer beeps. I get no choose menu. Nothing. I found out the usb stick is in msdos format. So what format should I use and how can I format it? I am not a computer geek who knows everything. I'm just a beginner. And only 16 years old. I've got a new problem. The screen isn't black anymore. Now there comes an error message: SYSLINUX 4.04 CHS 20110518 Copyright (C) 1994-2011 H.Peter Anvin et al ERROR:No configurationfile found No DEFAULT or UI configuration directive found! boot: And when I write something: boot:example Could not find kernel image:example boot: Why does this fail all the time? ps. I'm using Ubuntu Oneiric 11.10.

  Read the article

• How to create a bootable system with a squashfs root

  - by cldfzn

  My goal is to be able to take a customized root file system loaded with the software I want. So far I've created a squashed filesystem using debootstrap and chroot to install the software I want on the system. The problem I am now running in to.. whenever I boot in to the system, my user accounts that were set up in the chroot do not work. First boot everything works out, second boot I can't log in. That is baffling to me. Any one know a reason or a place to start looking? Update To get a working system with a squashfs filesystem: sudo apt-get install live-boot live-boot-initramfs-tools extlinux sudo update-initramfs -u Create a squashfs file from a bootstrapped or running ubuntu filesystem with whatever packages you want available. https://help.ubuntu.com/community/LiveCDCustomizationFromScratch provides good instructions for creating a debootstrapped system to build on. Format the target drive with ext2/3/4 and enable the bootable flag. Create the folder layout on the target drive and install extlinux: mkdir -p ${TARGET}/boot/extlinux ${TARGET}/live extlinux -i ${TARGET}/boot/extlinux dd if=/usr/lib/syslinux/mbr.bin of=/dev/sdX #X is the drive letter cp /boot/vmlinuz-$(uname -r) ${TARGET}/boot/vmlinuz cp /boot/initrd.img-$(uname -r) ${TARGET}/boot/initrd cp filesystem.squashfs ${TARGET}/live Create ${TARGET}/boot/extlinux/extlinux.conf with the following contents: DEFAULT Live LABEL Live KERNEL /boot/vmlinuz APPEND initrd=/boot/initrd boot=live toram=filesystem.squashfs TIMEOUT 10 PROMPT 0 Now you should be able to boot from the target drive in to your squashed system.

  Read the article

• Cannot boot into system after deleting partition

  - by Clayton

  Okay...so this was kind of a stupid thing for me to do now that I think back on it. I was experiencing a ton of lag and not as much memory that I could use after installing Ubuntu 12.04. So after remembering I had installed multiple server versions of Ubuntu 12.04 by mistake, I went into Disk Management and proceeded to delete each and every one. Everything went fine. Up until this week, I have not experienced any problems. But starting yesterday I began to get lag just as I had before, and nothing fixed the problem. I decided to remove the Ubuntu partition, since I was also experiencing a visual error when given the option to select one to boot(the screen doesn't come up at all, and I recieved a monitor resolution error instead, but could still access both Windows and Ubuntu via arrow keys). After deleting the Ubuntu partition, so that I could see if running just Windows would fix the problem, I proceeded with what I was doing, installing a few programs that were not tied to my prediciment in any way. Upon rebooting my desktop, however, I recieved the following error: error: unknown filesystem. grub rescue> Hoping I could boot into Ubuntu via a pendrive and possibly backup my important files and wipe the hard drive to start fresh, I installed Ubuntu 13.04, but even that does not boot. Instead, I get this message on a terminal screen: SYSLINUX 4.06. EDD 4.06-pre1 Copyright (C) 1994-2011 H. Peter Anvin et al ERROR: No configuration file found No DEFAULT or UI configuration directive found! boot: So more or less, my desktop is screwed. I need to be able to get to the files inside because of my job as an artist, as well as retrieve my documents for my stories stored on Windows. Once I can succeed in solving this once and for all, I know for a fact I will stick to Ubuntu only, and install what is required to be able to run any Windows applications I used to use or need to use. I would rather not reformat the hard drive, and if I need to, it is a last resort. And I doubt I can use a Windows Recovery Disk to get my files back, as my mom has thrown out a lot of the installation disks and paperwork I would need to even follow through with that. :\ Keep in mind that I am a novice/newbie when it comes to Linux, but am hoping ot become better at it as time goes by. I appreciate any help you guys can give me. This will probably be the last time I attempt to do anything that could risk the well-being of my PC. (I've also looked through various questions on the site and tested a lot of the solutions. None seem to have worked.)

  Read the article

• Why doesn't Ubuntu detect my second hard drive?

  - by user93179

  I am new to Linux and to Ubuntu, I was wondering, I have two hard drives setup in SATA ports (non-raid, at least I don't think they are). I installed ubuntu unto the drives fresh without any previous versions or windows at all. However when I got the Ubuntu 12.04 LTS working, all I see is 1 x 120 gigabyte harddrive. Also, not sure if this is important or not, my hard drives are SSD. My computer specs are Asus P9Z77-V-LK Nvidia Geforce GTX 660 TI Intel i5 3570k 3.4 /proc/partitions shows: major minor #blocks name 8 0 117220824 sda 8 1 117219328 sda1 8 16 117220824 sdb 8 17 96256 sdb1 8 18 108780544 sdb2 8 19 8342528 sdb3 11 0 1048575 sr0 and ls -l /sys/block/ | grep -v /virtual/: lrwxrwxrwx 1 root root 0 Sep 27 17:26 sda - ../devices/pci0000:00/0000:00:1f.2/host0/target0:0:0/0:0:0:0/block/sda lrwxrwxrwx 1 root root 0 Sep 27 17:26 sdb - ../devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0/block/sdb lrwxrwxrwx 1 root root 0 Sep 27 22:26 sdc - ../devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/host6/target6:0:0/6:0:0:0/block/sdc lrwxrwxrwx 1 root root 0 Sep 27 22:04 sr0 - ../devices/pci0000:00/0000:00:1f.2/host3/target3:0:0/3:0:0:0/block/sr0 sudo file -s /dev/sd*: /dev/sda: x86 boot sector; partition 1: ID=0x7, starthead 32, startsector 2048, 234438656 sectors, code offset 0xc0, OEM-ID " ?", Bytes/sector 190, sectors/cluster 124, reserved sectors 191, FATs 6, root entries 185, sectors 64514 (volumes 32 MB) , physical drive 0x7e, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled /dev/sdb2: Linux rev 1.0 ext4 filesystem data, UUID=387761ac-5eba-4d0f-93ba-746a82fb541d (needs journal recovery) (extents) (large files) (huge files) /dev/sdb3: data /dev/sdc: x86 boot sector; partition 1: ID=0xc, active, starthead 0, startsector 8064, 30473088 sectors, code offset 0xc0 /dev/sdc1: x86 boot sector, code offset 0x58, OEM-ID "SYSLINUX", sectors/cluster 64, reserved sectors 944, Media descriptor 0xf8, heads 128, hidden sectors 8064, sectors 30473088 (volumes 32 MB) , FAT (32 bit), sectors/FAT 3720, Backup boot sector 8, serial number 0xf90c12e9, label: "KINGSTON " /dev/sda1: x86 boot sector, code offset 0x52, OEM-ID "NTFS ", sectors/cluster 8, reserved sectors 0, Media descriptor 0xf8, heads 255, hidden sectors 2048, dos 32 MB) , FAT (32 bit), sectors/FAT 749, reserved3 0x800000, serial number 0x35361a2b, unlabeled Any help would be greatly appreciated! Thanks Another thing I noticed is, when i use gparted to locate my drives, it seems that sda1 is my second drive that I am not detecting when I boot up and my ubuntu + FAT Boot files are installed in sdb1

  Read the article

• Boot ISO image from GRUB4DOS on EFI machines

  - by Vladimir Tikhomirov

  I failed with loading ISO image (non-distro) from GRUB2 from USB stick, but found the way how I can boot the GRUB4DOS and then load the image from there. However, it doesn't work all the time and the questions is WHY it doesn't? Environment and loading process: We need to have EFI machine, USB stick, booting ISO, GRUB2 and GRUB4DOS. Last 3 on USB stick. Boot: USB - EFI loader - GRUB2 - GRUB4DOS - ISO image Configuration files To boot GRUB4DOS I use this from grub.cfg: menuentry "image.iso" { linux /syslinux/grub.exe --config-file="/menu.lst" } My menu.lst is here: timeout 20 default 0 title image.iso find --set-root --ignore-floppies --ignore-cd //image.iso map --heads=0 --sectors-per-track=0 //image.iso (hd32) map --hook chainloader (hd32) This works perfectly with Legacy machines. However, when I come to GRUB4DOS, I don't see the menu with image.iso, I see only GRUB command line. That means that my menu.lst didn't load. Why is it like this? Background and ideas I have an idea that GRUB4DOS doesn't recognize my USB stick as a device. I tried the command find and got (hd0,0), (hd0,1), (hd0,2), (rd). When I tried to set root to any of these devices I don't see fat file system, how it was with Legacy machines. The root device is (hd0,0), which has ntfs file system which should be partition with Windows. EFI machines support only GRUB2, so I can't boot GRUB4DOS straight away. Please, don't suggest anything like this, because my image doesn't have kernel. You can imagine that you load HDAT2 or Hiren's boot cd, for example. menuentry "Blancco Blancco5.iso" { set isofile="/image.iso" loopback loop $isofile set root=(loop) linux /isolinux/vmlinuz isofile=$isofile splash quiet initrd /isolinux/initrd }

  Read the article

• mrepo and grouplist/groupinstall?, mrepo not working as expected with group

  - by user52874

  All, I'm trying to set up mrepo so we can have internal repositories. After quite the slog, things seem to be working as expected EXCEPT for groups. From man createrepo: EXAMPLES Here is an example of a repository with a groups file. Note that the groups file should be in the same directory as the rpm packages (i.e. /path/to/rpms/comps.xml). createrepo -g comps.xml /path/to/rpms So here's what I'm doing: wget -c http://ftp.scientificlinux.org/linux/scientific/6/x86_64/os/repodata/comps-sl6-x86_64.xml cp comps-sl6-x86_64.xml /var/mrepo/SL6-x86_64/os/Packages/comps-sl6-x86_64.xml createrepo -g comps-sl6-x86_64.xml /var/mrepo/SL6-x86_64/os/Packages/ lots of output, no apparent errors or warnings BUT.. from a client: yum grouplist Loaded plugins: refresh-packagekit Setting up Group Process Error: No group data available for configured repositories Here's /etc/mrepo.conf: ### Configuration file for mrepo ### The [main] section allows to override mrepo's default settings ### The mrepo-example.conf gives an overview of all the possible settings [main] srcdir = /var/mrepo wwwdir = /var/www/mrepo confdir = /etc/mrepo.conf.d arch = x86_64 mailto = root@localhost smtp-server = localhost pxelinux = /usr/lib/syslinux/pxelinux.0 tftpdir = /tftpboot #rhnlogin = username:password ### Any other section is considered a definition for a distribution ### You can put distribution sections in /etc/mrepo.conf.d ### Examples can be found in the documentation. Here's /etc/mrepo.conf.d/sl6.mrepo: ### Scientific Linux 6 [SL6] name = Scientific Linux 6 release = 6 arch = x86_64 metadata = repomd repoview os = rsync://rsync.scientificlinux.org/scientific/$release/$arch/os/ updates = rsync://rsync.scientificlinux.org/scientific/$release/$arch/updates/ security = rsync://rsync.scientificlinux.org/scientific/$release/$arch/updates/security/ fastbugs = rsync://rsync.scientificlinux.org/scientific/$release/$arch/updates/fastbugs/

  Read the article

• Rebuild Fedora 19 ISO adding Kickstart for USB install

  - by dooffas

  I am attempting to edit a Fedora 19 DVD ISO to add a kickstart file. I then need this ISO burnt to a USB stick for instillation. The error I get when booting is Warning: Could not boot. Warning: /dev/root does not exist To try and determine which part of the process is failing I have broken the process down in to separate stages. Step 1: Burn the original ISO "Fedora-19-x86_64-DVD.iso" (Available - here) to a pendrive and see if that will install. dd if=/path/to/iso of=/dev/sdc Burning this image was successful and it installed without issue. Step 2: Exctract the ISO, repackage it and burn it to a pendrive and see if that will install. PLEASE NOTE: The final command in this section has been broken down in to multiple lines for ease of reading, in fact it was run as a single command on one line. mkdir -p /mnt/linux mount -o loop /tmp/linux-install.iso /mnt/linux cd /mnt/ tar -cvf - linux | (cd /var/tmp/ && tar -xf - ) cd /var/tmp/linux xorriso -as mkisofs -R -J -V "NewFedoraImage" -o ouput/file.iso -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -isohybrid-mbr /usr/share/syslinux/isohdpfx.bin . This iso was then burnt to a pendrive as before. dd if=/path/to/iso of=/dev/sdc This ISO burnt to the pen drive with no problem and will boot. I then see the fedora options screen. After choosing either "Install Fedora 19" or "Test this media & install Fedora 19" I then receive the errors highlighted above. This means the kickstart file is not to blame, but repackaging the ISO. Is there something I am missing in the repackaging process? Any input would be great! NOTE: If it is of any help, I attempted Step 2 with an Ubuntu server ISO and the process was successful.

  Read the article

• Ubuntu won't boot from USB memory stick

  - by mackenir

  I used the instructions on this webpage to create a bootable USB drive for running Ubuntu 9.10. Unfortunately it doesn't work on my EeePC. Even with 'Removable Dev.' selected in the BIOS as the first boot device, the PC just boots into Windows 7. How do I troubleshoot this problem? The drive is readable and looks like this: Directory of E:\ 28/10/2009 21:14 <DIR> .disk 28/10/2009 21:14 222 README.diskdefines 28/10/2009 21:14 143 autorun.inf 28/10/2009 21:14 <DIR> casper 28/10/2009 21:14 <DIR> dists 28/10/2009 21:14 <DIR> install 28/10/2009 21:14 <DIR> syslinux 28/10/2009 21:14 4,098 md5sum.txt 28/10/2009 21:14 <DIR> pics 28/10/2009 21:14 <DIR> pool 28/10/2009 21:14 <DIR> preseed 28/10/2009 21:14 0 ubuntu 26/10/2009 16:16 1,468,640 wubi.exe 25/02/2010 00:28 2,147,483,648 casper-rw 8 Dir(s) 5,290,307,584 bytes free

  Read the article

• pxe boot dos 7.x / 8.x on modern mainboard without floppy controller

  - by GitaarLAB

  How to pxe boot MS DOS 7.x / 8.x on a modern pc (mainboard without floppy controller) without using an external usb floppy drive? MS DOS 6.22 and earlier or other flavors pxe boot just fine on floppy-less hardware. But DOS 7.x and 8.x renders an error on boot: "Type the name of the Command Interpreter (e.g., C:\WINDOWS\COMMAND.COM) I read somewhere during research this was a rather unknown error, that started to become more common due to the advent of floppy-controller-less hardware. On some hardware (bios dependent) one could plug a usb-floppy-drive in the computer before booting (but that MIGHT also require it to be a "golden floppy drive" (as they where called back then). From a russian site (I read about a year ago and cannot find the hyperlink) MS-Dos versions 6.22 did some-kind of floppy-drive reset during initialization and since it couldn't connect to the floppy-host thus the error. How can I resolve this (without a physical external usb floppy)? Might there be some kind of virtual floppy-driver that could resolve this (for example to be loaded before the dos image loads)? Or could someone point me into the right direction (maybe even a hex-address and some further explanation or something)? I'm using syslinux by the way.

  Read the article

• Install Debian stable linux ISO from USB to dual boot Windows

  - by tgkprog

  I want debian as dual boot with my windows vista, Free'd up 50GB in my d drive. Plan to use 40 for debian install, 6GB for swap space Have a 16GB USB drive Downloaded http://unetbootin.sourceforge.net/ Downloaded DVD files of stable debian-7.0.0-amd64-DVD-1.iso ( debian-7.0.0-amd64-DVD-2.iso and 3) After I choose HD install, unetbootin says place the ISO in the same place. but I have 3. do i need to merge them? if so any freeware to do that? can i do it with 7zip? when I extract with 7 zip there are classes between the 3 ISO files. Just over write? Options to merge (format etc for 7zip) ? Or I must use I tried to keep the 3 files with the other unetbootin files but get an error msg Files I have on my USB 06/30/2013 11:44 PM 2,835,648 ubnkern 06/05/2013 12:14 AM 3,998,007,296 debian-7.0.0-amd64-DVD-1.iso 06/04/2013 03:30 PM 4,696,872,960 debian-7.0.0-amd64-DVD-2.iso 06/05/2013 01:25 AM 4,698,955,776 debian-7.0.0-amd64-DVD-3.iso 06/30/2013 11:45 PM 6,530,278 ubninit 06/30/2013 11:46 PM 155 syslinux.cfg 06/30/2013 11:46 PM 60,928 menu.c32 also i can only copy above files if i format my USB as NTFS On FAT32 says too large to copy .iso How do I get around that? My internet needs a login so cannot do net install

  Read the article

• Can't boot in Ubuntu after windows upgrade

  - by VanceAnce

  After my lastest update for Ubuntu and Windows XP, I got a Grub error on booting the next day. ls lists the following (without () ): sd0 sd1, msdos sd2 sd5 sd6 When I tried to get into one with (sd0,xy)/ it doesn't detect system or unknown file system error. I tried to boot to a live session with a Knoppix live CD and found out that all data exists. I also tried to recover with TestDisk and it finds all systems. Here is the test disk result: Start End Size in sectors 1 * HPFS - NTFS 0 1 1 7079 254 63 113740137 2 E extended LBA 7080 0 1 12161 254 63 81642330 5 L HPFS - NTFS 7080 1 1 10266 254 63 51199092 [Schule] X extended 12031 30 1 12161 254 63 2102625 6 L Linux Swap 12031 31 33 12161 254 63 2102530 I've 1 winxp-home, 1x Ubuntu (ext3+swap) and 1 winxp prof and then I wrote on mbr with TestDisk but I always get the same errors with Grub. What should I do? I need both XP and Ubuntu. Help me please. more infos in answers below - sry for thos confusing style but im working on diff live system and browsers and have to reboot always the boot info script output is also down below maybe an advanced user can correct my fail posting - after i can solve my issuse i will register here thanx and pls help me with those weired issues ! as i still cant just comment my own answer or those on top i again has to put it here as a sepperate answer..... (or even edit - maybe an browser failur using the live cds ... cause this posti can edit) here the bootinfo script output - but the result is the same as with TestDisk ... but it looks worse - cause it also doesnt detect my old ubuntu ... but there wasnt a eares process or overwrite process visibile ending the last working session output: Boot Info Script 0.61 [1 April 2012] ============================= Boot Info Summary: =============================== = Syslinux MBR (4.04 and higher) is installed in the MBR of /dev/sda. sda1: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows XP Boot files: /boot.ini /ntldr /NTDETECT.COM sda2: __________________________________________ File system: Extended Partition Boot sector type: - Boot sector info: sda5: __________________________________________ File system: ntfs Boot sector type: Windows XP: NTFS Boot sector info: According to the info in the boot sector, sda5 starts at sector 63. Operating System: Windows XP Boot files: sda6: __________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _______________________________________ Disk /dev/sda: 100.0 GB, 100030242816 bytes 255 heads, 63 sectors/track, 12161 cylinders, total 195371568 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 * 63 113,740,199 113,740,137 7 NTFS / exFAT / HPFS /dev/sda2 113,740,200 195,382,529 81,642,330 f W95 Extended (LBA) /dev/sda5 113,740,263 164,939,354 51,199,092 7 NTFS / exFAT / HPFS /dev/sda6 193,280,000 195,382,529 2,102,530 82 Linux swap / Solaris /dev/sda2 ends after the last sector of /dev/sda /dev/sda6 ends after the last sector of /dev/sda "blkid" output: ____________________________________ Device UUID TYPE LABEL /dev/loop0 squashfs /dev/sda1 6596D86768011128 ntfs /dev/sda5 1300D3B7744EC141 ntfs Schule /dev/sda6 5b95f2a1-4145-43a5-ac51-41d7dd32b213 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/loop0 /rofs squashfs (ro,noatime) /dev/sr0 /cdrom iso9660 (ro,noatime) ================================ sda1/boot.ini: ================================ [boot loader] timeout=30 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect /NoExecute=OptOut multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /fastdetect [spybotsd] timeout.old=30 the last part shows that i now use the windows boot loader so that i can acces at least one OS but shouldnt i also get acces to my ubuntu partitions with live-linux-cds ? or do i have to boot with grub to get to those files only ??

  Read the article

• XenServer 6.0.2 path to installation media contains non-ascii characters

  - by cmaduro

  XenServer 6.0.2 install fails no matter what I do. I have confirmed that the md5 checksum on my ISO file is good. I tried installing from a mounted ISO file (remotely via iKVM). I tried installing from physical media. I tried installing from a bootable USB stick (using syslinux + contents of the ISO) All attempts have yielded the same result: When verifying the installation media, at 0% initializing, the following is reported: "Some packages appeared to be damaged." followed by a list of pretty much all the gz2 and rpm packages. If I skip the media verification the installer proceeds and then gives me an error when it reaches "Installing from base pack" at 0% which states "An unrecoverable error has occurred. The error was: 'ascii' codec can't decode byte 0xff in position 20710: ordinal not in range(128) Please refer to your user guide, or contact a Technical Support Representative, for further details" there is one option left which is to reboot. Apparently at some point during the processing of the repositories on the installation media non-ascii characters are found, which causes the installer to quit. How do I fix this? Here are my specs TYAN S8236 motherboard 2 AMD Opteron 6234 processors LSI2008 card connected to 2 1TB Seagate Constellation drives SATA, 1 500GB Corsair m4 SSD SATA and 1 Corsair Forse 3 - 64GB SSD SATA Onboard SATA connected to a slim DVD-+RW. Onboard SAS connected to 2 IBM ESX 70GB 10K SAS drives (for XenServer) 256GB memory ================================================================================= Comments: According to pylonsbook.com "chances are you have run into a problem with character sets, encodings, and Unicode" – cmaduro 10 hours ago A clue is provided by "vmware.com/support/vsphere5/doc/…; Data migration fails if the path to the vCenter Server installation media contains non-ASCII characters When this problem occurs, an error message similar to: 'ascii' codec can't decode byte 0xd0 in position 30: ordinal not in range(128) appears, and the installer quits unexpectedly during the data migration process. – cmaduro 10 hours ago This is an error that python throws. And guess what, the .py extention of the file you have to edit in this link community.spiceworks.com/how_to/show/1168 means the installer is written in python. Python is interpreted, so now to find the install file responsible for this error. – cmaduro 6 hours ago The file that generates the error upon verification is /opt/xensource/installer/tui/repo.py. The error message appears around line 359. – cmaduro 2 hours ago I am fairly sure that the install error is generated somewhere in repository.py as the backend.py file throws errors while methods in that file are being called. Perhaps all errors can be traced back to this file. – cmaduro 1 hour ago

  Read the article

< Previous Page | 1 2 3  | Next Page >