Search Results

Search found 2177 results on 88 pages for 'wifi'.

Page 2/88 | < Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >

  • Problem with Lenovo x200s Wifi under Ubutu Karmic

    - by oneself
    Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

    Read the article

  • wireshark not seeing all packets on WiFi

    - by Caffeine Coma
    I'm using Wireshark on OSX, trying to sniff my home network over WiFi. While I can see packets that are sent to/from the host I'm sniffing on, I'm not seeing anything else that goes over the WiFi. It's like I'm not in promiscuous mode or something (the promiscuous mode box is in fact checked). The router is an Apple Airport Extreme, protected by WPA2. I'm attached to the network I'm trying to sniff, so I'm confused about why I can't see other traffic. Edit: I solved this by the following: Plug Macbook directly into the Airport Extreme router Enable "internet sharing" on Macbook, with no password. Bind wireless device (the one I wanted to sniff) to the WiFi hotspot generated by Internet sharing in step 2. Run Wireshark on the Macbook, bound to device en1. Don't forget to disable sharing after you're done. :-)

    Read the article

  • Forwarding wifi traffic to wired pc

    - by brydgesk
    I'm trying to play around with Wireshark on my home network, and was wondering if there is a way to create a new connection on my PC that receives all wifi packets on the network. The PC is a wired Windows 7 machine, and I'm using DD-WRT on an Asus RT-N16 router. I'm not trying to hack anything, I have full admin access to the router itself. My searching has led me to articles about client bridges and repeater bridges, but none of them seemed to apply entirely to my situation. I'd like to continue using my standard wifi connection, but make my PC act as a repeater that receives all wifi traffic. Again, the PC has no wireless connection. I've used tcpdump which is installed on the router itself, but I'd be more comfortable analyzing the packets in Windows, as I'm trying to learn Wireshark. Thanks

    Read the article

  • Extend university wifi network [migrated]

    - by asfasdoiuh ouhouhouh
    i live in a university campus and i can get wifi signal on the outside of my window but not in the house. The solution i use at the moment is a usb wifi dongle outside connected to my laptop but the lack of an internal antenna make the connection quite unreliable at times. So i was trying to find another solution to improve the reception of my network. One idea is to setup a router on the outside (in a place with stronger signal) and redirect the connection inside the house with an ethernet cable but the problem is that our Uni Wifi is managed by a capitve portal (BlueSocket with DNS redirection to login page) and the authentication has to happen on the mac address that connect to the net (so the client appliance in this case). If I use a router with Mac-Clone capability i will be able to be redirected trough the captive portal on my laptop computer and login from there or i need to setup my router to fill in the login page by itself? There are other hardware/software solutions i can use to get what i want? Thank you all

    Read the article

  • Wifi and eth behavior

    - by r00ster
    I have a wireless router 150M Wireless Lite N Router Model No. TL-WR740N / TL-WR740ND. Normally, when I'm connected to the local network using eth0 I can ping other machines by issuing ping name. When I'm connected through wifi I have to issue ping name.domain.com. The machine is only visible in intranet. How to achieve the same behavior with wifi? The second problem is, that I can not connect to some external sites through wifi but through eth everything is ok. I guess that is related to some port forwarding, but I'm not sure. How can I resolve this issue? EDIT: I'm using Linux Mint.

    Read the article

  • Problem with Lenovo x200s Wifi under Ubutu Karmic

    - by oneself
    Hi, I have just gotten my Lenovo X200s laptop, and I am install Ubuntu 9.10 Karmic on it. The installation went through without a hitch, but I can't get my wifi to work. lspci | grep Network Produces the following results: 00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03) 03:00.0 Network controller: Realtek Semiconductor Co., Ltd. Device 8172 (rev 10) The weird part is that when I turn the wifi hardware stitch on and off on the side of the laptop, I get the following printed in /var/log messages: Dec 30 23:24:48 temp-laptop kernel: [ 213.432302] usb 4-2: USB disconnect, address 2 Dec 30 23:24:52 temp-laptop kernel: [ 217.276310] usb 4-2: new full speed USB device using uhci_hcd and address 3 Dec 30 23:24:52 temp-laptop kernel: [ 217.441759] usb 4-2: configuration #1 chosen from 1 choice Does Ubuntu think my wifi card is a USB device? Am I missing some driver? What can I do to fix this? Please, help!

    Read the article

  • Why does wifi hotspot doesn't work correctly?

    - by Habi
    I have created the wifi hotspot. In windows, it used to display wifi signal on my nokia C3 but after creating wifi hotspot from ubuntu, I am facing certain problem. Nokia C3 doesn't even gets wifi signal. But wifi signal appears in my samsung mobile GTS3-850 and I can access wifi if I put wifi security option to "none" On the other hand, if I create password then Nomatters, if I type right password or not, it doesn't connect to that wifi. Note : I use Wimax to access internet.

    Read the article

  • HP Envy dv6t-7300: Disabled WiFi through button and can't enable it anymore

    - by Mateus B. Cassiano
    Well, I have a HP Envy dv6t-7300 laptop that came with a Ralink RT5390 WiFi card. Everything was working perfectly, and eventually I press the WiFi button in my keyboard to toggle the card on/off. Until today, all worked right: if the wifi was off (wifi LED amber) and I press the wifi button, after a few seconds the LED turn white and everything works. If I repeat the process, the wifi LED turn amber and the card get disabled, but now, I can't turn it on anymore. running sudo rfkill list all I get: 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: yes So, I ran sudo rfkill unblock all but nothing changed. As a side note, if I run sudo ifconfig wlan0 up, the indicator LED gets white (indicating that the card was enabled), but Ubuntu still say that the card is blocked by hardware. Extra information: the card works without issues in windows and in Ubuntu installer (booting from a live CD). I'm using the card out-of-box, using the drivers already included in Ubuntu 12.10. The module rt2800pci is loaded and working fine, not blacklisted, etc, etc. The card and the button toggle worked flawlessly until today, when I toggled it off and can't turn it on anymore... The problem is back, but in a different manner: if I don't press the wifi key a few times during the grub loading, in the login screen the wifi button will be ambar (disabled), pressing it will toggle it white (enabled) or ambar (disabled) again, but ubuntu still says that the network card was disabled by hardware and doesn't connect... In other words, if I don't press the WiFi button a few times when Ubuntu is booting, it will be stuck with the "network card was disabled by hardware" message, even if the light is white (enabled). Any clue? Maybe a error in some startup script or config file?

    Read the article

  • Problem with Macbook air automatically not acquiring free wifi network dns or router address

    - by Rumsfeld
    I have this problem when my macbook air sometimes does not connect to free wifi hotspots. When the problem happens and I try to run the diagnostics, it normally gets to yellow network settings tab. It seems that it for some reason does not acquire automatically the router or dns address. Sometimes after I shut it down and restart it magically connects to the wifi hotspot but it is very inconsistent. Anyone knows a fix for this problem?

    Read the article

  • Difference between indoor and outdoor WiFi Access Points

    - by aaron-cook
    Does anyone know if there is an operational difference between what is classified as an 'indoor' wifi access point and an 'outdoor' wifi access point. I'm speaking specifically to its operation rather than things like whether its enclosure is weather proof or not. And I'm also referring to the access point itself as opposed to the antenna used.

    Read the article

  • Connect multiple WiFi networks simultaneously

    - by Tamir
    Hi all :-) I thought about connecting multiple WiFi networks simultaneously in order to leverage my bandwidth. I heared about "VirtualWifi" which is abandon by MS research. I have new Intel WiFi chipset (6200) and Win7 (64bit). Can I do such of thing somehow? Many thanks for your answers! Tamir

    Read the article

  • No WiFi networks - Fujitsu Lifebook on Windows 7

    - by Sergey Osypchuk
    I lost ability to see WiFi networks on my laptop. I already tryied: reinstall wifi driver reboot disable/enable from windows and from bios check for latest driver both by Windows and Fukitsu driver update When i Use windows Network Diagnostic, I am getting recomendation "Turn on Wireless capability". There is no switch or keyboard combination for this laptop model (or I do not know any one). Any ideas?

    Read the article

  • can't find ip of wifi acess point

    - by Crash893
    I setup an wireless AP (linksys wifi router) to have no dhcp and point to the main router as the default gateway. I also set it up to obtain a ip from the network but when i go to my main router and look for it i don't see any ip's that it could be If i use net stumbler i can see the mac address of the wifi portion of it but Im at a loss how to get into the web console of this router any ideas on how to "find" this router?

    Read the article

  • How to get decent WiFi despite a virtual Faraday cage

    - by MT_Head
    One of my clients is the local branch of an international airline. They have a small office in the secured area behind the ticket counters, and timeshare space at the ticket counter. I need to add a ticket printer out front, which I cannot (for contract/liability reasons) attach to the shared computer at the counter; the only workable solution seems to be to put the printer and its attached computer on a cart and connect to the office's network via WiFi. So far, no problem - right? Well, the terminal has been getting a facelift, which - among other things - includes decorative stainless-steel panels along the wall behind the ticket counters. This paneling acts as a seriously effective barrier to WiFi! The office's WiFi router - a brand-new D-Link DIR-815, dual-band 802.11n - is just on the other side of the pictured wall, and twenty feet or so to the right. And yet the only way I can connect AT ALL on this side of the wall is to stick the USB adapter (on the end of an extension cable) right into the crack between panels... and even then I can only see the 5GHz network, and that very weakly. Has anyone else had experience with this sort of misguided interior decoration? Any ideas on how I can improve reception on the other side of the barrier? (Needless to say, physical modifications of the environment - tempting though they might be - are strictly no-go.)

    Read the article

  • How to increase wifi speed for laptops

    - by sagar
    Now, Let me explain the situation. I am having a query regarding Wi-Fi network. I am having PC & laptop. I requested my Wi-Fi providers that I want connection in my PC. So that - Wi-Fi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my does not have a built in Wi-Fi adapter. Now - almost laptops have built in Wi-Fi. Now - On terrace there is Wi-Fi with superb speed. But on my flat - Wi-fi comes with low speed. So, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

    Read the article

  • Determine wifi capabilities of Windows box (with WSUS install rules)

    - by Hagen von Eitzen
    I need to determine if a computer is in fact a laptop with wifi capabilities (with emphasis on wifi rather than laptop). More precisely, I want to distribute a piece of software I wrote via WSUS and Local Update Publisher to those clients. To this end, I want to create appropriate "Package installable rules", that is simple rule used bay the Windows Update Service on the client to decide beforehand whether or not an update/installation package is applicable. Typically, such "installabel rules" are logical combinations of rules of type "File exists", "Registry Key exists", "WMI Query", "MSI Product Installed", so I'd prefer one of those methods. The method I hope someone here can help me find should work with Win 7/Vista, preferably also with XP. My guess is that WMI query is the way to go, but I have little experience in that. I have found that one can e.g. query for EnclosureType and that might detect a laptop. However, I would be much happier if an actually available wifi interface would be detected. Does anyone have an idea how to approach this? If there is anything you need me to clarify, don't hesitate to comment.

    Read the article

  • Wifi as LAN - Is it possible ? How ?

    - by sagar
    Hello ! Every one. I am having a query regarding WiFi network. I am having PC & LapTop. Now, Let me explain the situation. I requested My WiFi providers that I want connection in my PC. So that - WiFi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my pc is not having inbuilt wifi functionality. Now - almost laptops have inbuilt functionality. Now - On terrace there is wifi with superb speed. But on my flat - wifi comes with low speed. so, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

    Read the article

  • Wifi as LAN - Is it possible ? How ?

    - by sagar
    Hello ! Every one. I am having a query regarding WiFi network. I am having PC & LapTop. Now, Let me explain the situation. I requested My WiFi providers that I want connection in my PC. So that - WiFi provider set up an Antenna on my building Terrace - They joined a cable to pc & that Antenna. ( I think using RJ45 connector ) - The reason behind this - my pc is not having inbuilt wifi functionality. Now - almost laptops have inbuilt functionality. Now - On terrace there is wifi with superb speed. But on my flat - wifi comes with low speed. so, when ever I use internet on my pc - it has great speed - but my laptop works with low speed. The reason behind this - PC is catching wifi from terrace & laptop is catching the wifi from it's own place. Now, My question is something like this. Can we place an antenna or something like that & connect it to laptop for better wifi speed? ( I am not technical person - Please add comment for down vote - if any ) ( Please add comment for more explanation of my Problem ) Thanks in advance for sharing your knowledge. Sagar

    Read the article

  • OS X can't copy files from Windows Home Server...over wifi.

    - by John Clayton
    I'm a brand spanking new user of OS X, coming from a lifetime of Windows use. I've been setting up my new Macbook Pro and have run into a very unusual problem. Over wifi, I am unable to copy files to or from my Windows Home Server. The problem seems to exist only over wifi, and only to WHS. Here are the details of my setup: 2010 Macbook Pro (Core i7), OS X 10.6.3 Windows Home Server PP3 (virtualized in XenServer 5.5) Windows 7 Ultimate x64 desktop Windows 7 Ultimate x64 in Boot Camp D-Link DIR-655 wireless N router Here is what I've done to narrow down the problem: Files copy fine from WHS to OS X when using gigabit ethernet Files copy fine from desktop to OS X when using gigabit ethernet Files fail to copy from WHS to OS X when using wifi (error -51) Files copy fine from desktop to OS X when using wifi Files copy fine from WHS to Boot Camp when using wifi Files copy fine from desktop to Boot Camp when using wifi From what I can tell, it seems to be some sort of issue between OS X and WHS, but I can't for the life of me see what would be different between shares on WHS and my desktop. They are both connected using smb://ADDRESS (I've tried both by IP and name). I can browse the shares on the WHS, but copying to OS X fails. I originally found the issue while installing VS2010 off an ISO from WHS, mounted to a Windows 7 VM using VMware Fusion. During the installation the VM was unusable - even the clock got behind the host be about 8 minutes. Once I plugged in the ethernet and disabled the wifi things picked up and finished quickly. The Fusion 3.1 RC is the only I think of that I installed that may have messed with the wifi driver. I've also tried resetting the wifi router, and have changed it from being G & N to N-only. Under Boot Camp I get similar speeds as my wife's N laptop. Any ideas? Thanks!

    Read the article

  • Tunnel into Sonicwall VPN while on Sonicwall wifi?

    - by Patrick Harrington
    Hey all, I am able to hit my company's VPN while I am at home using a dedicated IP with no issue. When I am at work, the VPN we use (a Sonicwall router/VPN/wifi access point), I can get outside internet fine, but am unable to connect to the VPN. I know that the wifi puts me on a different subnet, and when I try to connect to the normal VPN IP it won't work, and a traceroute just times out. Any suggestions? Might there be an internal IP I need to hit while here at work?

    Read the article

  • Connecting desktop computer to the internet through laptop wifi

    - by Josh
    Due to some home network complications I have had to move my router to a seperate part of the house, therefore the wired network I had set up can no longer work. Before I find the time to go out and buy a Wifi adapter for my desktop PC, I have a laptop that uses a built in Wifi card to connect to my router and this can connect to the internet, and I was wondering if I could somehow access the internet on my desktop PC via my laptop. I'm hoping for a not-so-complex solution as this will only be set up for a few days, but it is quite vital that my desktop computer gets internet access. Does anyone have experience in this sort of thing and can help me out? Thanks.

    Read the article

< Previous Page | 1 2 3 4 5 6 7 8 9 10 11 12  | Next Page >