Search Results

Search found 4830 results on 194 pages for 'conf'.

Page 20/194 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

  • How can I configure the Aiptek T-6000U graphics tablet?

    - by mejpark
    I followed AiptekTablet instructions on the Ubuntu Wiki to configure 11.04 for use with my graphics tablet. I installed the xserver-xorg-input-aiptek package and created two files with the options detailed on the Wiki page above: $ cat /lib/udev/rules.d/69-xserver-xorg-input-aiptek.rules ACTION!="add|change", GOTO="xorg_aiptek_end" KERNEL!="event[0-9]*", GOTO="xorg_aiptek_end" ATTRS{idVendor}=="08ca", ENV{x11_driver}="aiptek", SYMLINK+="input/aiptektablet" LABEL="xorg_aiptek_end" $ cat /usr/share/X11/xorg.conf.d/50-aiptek.conf Section "InputClass" Identifier "pen" MatchProduct "Aiptek|AIPTEK|aiptek" MatchDevicePath "/dev/input/event*" Driver "aiptek" Option "USB" "on" Option "Type" "stylus" Option "Mode" "absolute" Option "zMin" "0" Option "zMax" "511" EndSection The 50-aiptek.conf file was originally called 10-aiptek.conf as in the Wiki, but an Aiptek tablet installation help thread on the Ubuntu Forums, suggested changing 10 to 50. Any ideas? Thank you.

    Read the article

  • How to login as other in ubuntu 12.04

    - by murali
    i have upgraded my ubuntu 11.10 to 12.04. i could not see other login option in the login screen. it shows only Guest login and User login. The User Login ask only password and i had never entered in as User login so that i do not know about password of User login. my problem is how to login as root from the login screen? how can i get Other login option to login as root or some other user? before ask this question i have tried the following: try to add the greeter-show-manual-login=true line at the bottom of /etc/lightdm/lightdm.conf file as Guest login but i get access denied error. i do not know the password of User login (ask only password while login) to purpose of adding above line. from the safe mode login, i could login as root but i could not add the above line the lightdm.conf file . i got read only error so that i tried to change the permission to 777 like the following > chmod 777 lightdm.conf (i am within the /etc/lightdm/). but i got the error the file marked as/is read only in the file system. In 11.10 version i have created 4 users. i can see that the users exist in 12.10 . so i am sure my self users are not removed while upgrate. In short, i need Other login option on my login screen? how to get it? please help me. * Edited Question:* i have add the following line the /etc/lightdm/lighdm.conf file on recovery mode greeter-show-manual-login=true and i saved the file using wq command. now my /etc/lightdm/lighdm.conf file looking as the following: [SeatDefaults] greeter-session=unity-greeter user-session=ubuntu greeter-show-manual-login=true if i commit any mistake please correct me. by this problem i have wasted the two working day and all the works are in pending... please help me.

    Read the article

  • My laptop can not access internet after setup bridge with wired NIC and wireless NIC

    - by Victor S
    I setup a bridge using wired NIC and wireless NIC in order to make wireless NIC as a Wi-Fi AP to share wired internet access, after setup successfully, the Wi-Fi AP works as my expectation, but my laptop can not access internet, please give me a hand. Thanks. My hostapd.conf $ cat hostapd.conf interface=wlan0 bridge=br0 driver=nl80211 ssid=myAP hw_mode=g channel=11 dtim_period=1 rts_threshold=2347 fragm_threshold=2346 macaddr_acl=0 auth_algs=3 ieee80211n=0 wpa=3 wpa_passphrase=PassWord wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP Setup steps: $ sudo killall hostapd hostapd: no process found $ sudo hostapd -B hostapd.conf Configuration file: hostapd.conf Using interface wlan0 with hwaddr 00:26:5e:e8:4f:8e and ssid 'myAP' $ sudo brctl addbr br0 device br0 already exists; can't create bridge with the same name $ sudo ifconfig eth0 0.0.0.0 up $ sudo ifconfig wlan0 0.0.0.0 up $ sudo brctl addif br0 eth0 $ sudo brctl addif br0 wlan0 device wlan0 is already a member of a bridge; can't enslave it to bridge br0. $ sudo ifconfig br0 192.168.1.110 netmask 255.255.255.0 $ sudo route add default gw 192.168.1.1

    Read the article

  • How to solve CUDA crash when run CUDA example fluidsGL?

    - by sam
    I use ubuntu 12.04 64 bits with GTX560Ti. I install CUDA by following instruction: wget http: //developer.download.nvidia.com/compute/cuda/4_2/rel/toolkit/cudatoolkit_4.2.9_lin ux_64_ubuntu11.04.run wget http: //developer.download.nvidia.com/compute/cuda/4_2/rel/drivers/devdriver_4.2_linux _64_295.41.run wget http: //developer.download.nvidia.com/compute/cuda/4_2/rel/sdk/gpucomputingsdk_4.2.9 _linux.run chmod +x cudatoolkit_4.2.9_linux_64_ubuntu11.04.run sudo ./cudatoolkit_4.2.9_linux_64_ubuntu11.04.run echo "/usr/local/cuda/lib64" > ~/cuda.conf echo "/usr/local/cuda/lib" >> ~/cuda.conf sudo mv ~/cuda.conf /etc/ld.so.conf.d/cuda.conf sudo ldconfig echo 'export PATH=$PATH:/usr/local/cuda/bin' >> ~/.bashrc chmod +x gpucomputingsdk_4.2.9_linux.run ./gpucomputingsdk_4.2.9_linux.run sudo apt-get install build-essential libx11-dev libglu1-mesa-dev freeg lut3-dev libxi-dev libxmu-dev gcc-4.4 g++-4.4 sed 's/g++ -fPIC/g++-4.4 -fPIC/g' ~/NV IDIA_GPU_Computing_SDK/C/common/common.mk > ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak; mv ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk sed 's/gcc -fPIC/gcc-4.4 -fPIC/g' ~/NV IDIA_GPU_Computing_SDK/C/common/common.mk > ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak; mv ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk sed 's/-L$(SHAREDDIR)\/lib/-L$(SHAREDDIR)\/lib -L\/u sr\/lib\/nvidia-current/g' ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk > ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak; mv ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk sed 's/-L$(SHAREDDIR)\/lib -L\/usr\/lib\/nvidia-current $(NV CUVIDLIB)/-L$(SHAREDDIR)\/lib $(NVCUVIDLIB)/g' ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk > ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak; mv ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk.bak ~/NVIDIA_GPU_Computing_SDK/C/common/common.mk After I run ~/NVIDIA_GPU_Computing_SDK/C/bin/linux/release/./fluidsGL It got stuck even mouse or keyboard couldn't move. How to solve it? Thank you~

    Read the article

  • Unable to connect to Samba printer

    - by user127236
    I have a headless Ubuntu 12.04 server for files and printers. It shares files via Samba just fine. However, the HP PSC-750xi connected to the server via USB is not accessible from my Ubuntu 12.04 laptop. I can browse for it in the Printing control panel, but any attempt to authenticate my ID to the printer with my user credentials results in the error "This print share is not accessible". I have included the Samba smb.conf file below. Any help appreciated. Thanks... JGB # # Sample configuration file for the Samba suite for Debian GNU/Linux. # # # This is the main Samba configuration file. You should read the # smb.conf(5) manual page in order to understand the options listed # here. Samba has a huge number of configurable options most of which # are not shown in this example # # Some options that are often worth tuning have been included as # commented-out examples in this file. # - When such options are commented with ";", the proposed setting # differs from the default Samba behaviour # - When commented with "#", the proposed setting is the default # behaviour of Samba but the option is considered important # enough to be mentioned here # # NOTE: Whenever you modify this file you should run the command # "testparm" to check that you have not made any basic syntactic # errors. # A well-established practice is to name the original file # "smb.conf.master" and create the "real" config file with # testparm -s smb.conf.master >smb.conf # This minimizes the size of the really used smb.conf file # which, according to the Samba Team, impacts performance # However, use this with caution if your smb.conf file contains nested # "include" statements. See Debian bug #483187 for a case # where using a master file is not a good idea. # #======================= Global Settings ======================= [global] log file = /var/log/samba/log.%m passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* . obey pam restrictions = yes map to guest = bad user encrypt passwords = true passwd program = /usr/bin/passwd %u passdb backend = tdbsam dns proxy = no writeable = yes server string = %h server (Samba, Ubuntu) unix password sync = yes workgroup = WORKGROUP syslog = 0 panic action = /usr/share/samba/panic-action %d usershare allow guests = yes max log size = 1000 pam password change = yes ## Browsing/Identification ### # Change this to the workgroup/NT-domain name your Samba server will part of # server string is the equivalent of the NT Description field # Windows Internet Name Serving Support Section: # WINS Support - Tells the NMBD component of Samba to enable its WINS Server # wins support = no # WINS Server - Tells the NMBD components of Samba to be a WINS Client # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both ; wins server = w.x.y.z # This will prevent nmbd to search for NetBIOS names through DNS. # What naming service and in what order should we use to resolve host names # to IP addresses ; name resolve order = lmhosts host wins bcast #### Networking #### # The specific set of interfaces / networks to bind to # This can be either the interface name or an IP address/netmask; # interface names are normally preferred ; interfaces = 127.0.0.0/8 eth0 # Only bind to the named interfaces and/or networks; you must use the # 'interfaces' option above to use this. # It is recommended that you enable this feature if your Samba machine is # not protected by a firewall or is a firewall itself. However, this # option cannot handle dynamic or non-broadcast interfaces correctly. ; bind interfaces only = yes #### Debugging/Accounting #### # This tells Samba to use a separate log file for each machine # that connects # Cap the size of the individual log files (in KiB). # If you want Samba to only log through syslog then set the following # parameter to 'yes'. # syslog only = no # We want Samba to log a minimum amount of information to syslog. Everything # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log # through syslog you should set the following parameter to something higher. # Do something sensible when Samba crashes: mail the admin a backtrace ####### Authentication ####### # "security = user" is always a good idea. This will require a Unix account # in this server for every user accessing the server. See # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html # in the samba-doc package for details. # security = user # You may wish to use password encryption. See the section on # 'encrypt passwords' in the smb.conf(5) manpage before enabling. # If you are using encrypted passwords, Samba will need to know what # password database type you are using. # This boolean parameter controls whether Samba attempts to sync the Unix # password with the SMB password when the encrypted SMB password in the # passdb is changed. # For Unix password sync to work on a Debian GNU/Linux system, the following # parameters must be set (thanks to Ian Kahan <<[email protected]> for # sending the correct chat script for the passwd program in Debian Sarge). # This boolean controls whether PAM will be used for password changes # when requested by an SMB client instead of the program listed in # 'passwd program'. The default is 'no'. # This option controls how unsuccessful authentication attempts are mapped # to anonymous connections ########## Domains ########### # Is this machine able to authenticate users. Both PDC and BDC # must have this setting enabled. If you are the BDC you must # change the 'domain master' setting to no # ; domain logons = yes # # The following setting only takes effect if 'domain logons' is set # It specifies the location of the user's profile directory # from the client point of view) # The following required a [profiles] share to be setup on the # samba server (see below) ; logon path = \\%N\profiles\%U # Another common choice is storing the profile in the user's home directory # (this is Samba's default) # logon path = \\%N\%U\profile # The following setting only takes effect if 'domain logons' is set # It specifies the location of a user's home directory (from the client # point of view) ; logon drive = H: # logon home = \\%N\%U # The following setting only takes effect if 'domain logons' is set # It specifies the script to run during logon. The script must be stored # in the [netlogon] share # NOTE: Must be store in 'DOS' file format convention ; logon script = logon.cmd # This allows Unix users to be created on the domain controller via the SAMR # RPC pipe. The example command creates a user account with a disabled Unix # password; please adapt to your needs ; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u # This allows machine accounts to be created on the domain controller via the # SAMR RPC pipe. # The following assumes a "machines" group exists on the system ; add machine script = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u # This allows Unix groups to be created on the domain controller via the SAMR # RPC pipe. ; add group script = /usr/sbin/addgroup --force-badname %g ########## Printing ########## # If you want to automatically load your printer list rather # than setting them up individually then you'll need this # load printers = yes # lpr(ng) printing. You may wish to override the location of the # printcap file ; printing = bsd ; printcap name = /etc/printcap # CUPS printing. See also the cupsaddsmb(8) manpage in the # cupsys-client package. ; printing = cups ; printcap name = cups ############ Misc ############ # Using the following line enables you to customise your configuration # on a per machine basis. The %m gets replaced with the netbios name # of the machine that is connecting ; include = /home/samba/etc/smb.conf.%m # Most people will find that this option gives better performance. # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html # for details # You may want to add the following on a Linux system: # SO_RCVBUF=8192 SO_SNDBUF=8192 # socket options = TCP_NODELAY # The following parameter is useful only if you have the linpopup package # installed. The samba maintainer and the linpopup maintainer are # working to ease installation and configuration of linpopup and samba. ; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' & # Domain Master specifies Samba to be the Domain Master Browser. If this # machine will be configured as a BDC (a secondary logon server), you # must set this to 'no'; otherwise, the default behavior is recommended. # domain master = auto # Some defaults for winbind (make sure you're not using the ranges # for something else.) ; idmap uid = 10000-20000 ; idmap gid = 10000-20000 ; template shell = /bin/bash # The following was the default behaviour in sarge, # but samba upstream reverted the default because it might induce # performance issues in large organizations. # See Debian bug #368251 for some of the consequences of *not* # having this setting and smb.conf(5) for details. ; winbind enum groups = yes ; winbind enum users = yes # Setup usershare options to enable non-root users to share folders # with the net usershare command. # Maximum number of usershare. 0 (default) means that usershare is disabled. ; usershare max shares = 100 # Allow users who've been granted usershare privileges to create # public shares, not just authenticated ones #======================= Share Definitions ======================= # Un-comment the following (and tweak the other settings below to suit) # to enable the default home directory shares. This will share each # user's home director as \\server\username ;[homes] ; comment = Home Directories ; browseable = no # By default, the home directories are exported read-only. Change the # next parameter to 'no' if you want to be able to write to them. ; read only = yes # File creation mask is set to 0700 for security reasons. If you want to # create files with group=rw permissions, set next parameter to 0775. ; create mask = 0700 # Directory creation mask is set to 0700 for security reasons. If you want to # create dirs. with group=rw permissions, set next parameter to 0775. ; directory mask = 0700 # By default, \\server\username shares can be connected to by anyone # with access to the samba server. Un-comment the following parameter # to make sure that only "username" can connect to \\server\username # The following parameter makes sure that only "username" can connect # # This might need tweaking when using external authentication schemes ; valid users = %S # Un-comment the following and create the netlogon directory for Domain Logons # (you need to configure Samba to act as a domain controller too.) ;[netlogon] ; comment = Network Logon Service ; path = /home/samba/netlogon ; guest ok = yes ; read only = yes # Un-comment the following and create the profiles directory to store # users profiles (see the "logon path" option above) # (you need to configure Samba to act as a domain controller too.) # The path below should be writable by all users so that their # profile directory may be created the first time they log on ;[profiles] ; comment = Users profiles ; path = /home/samba/profiles ; guest ok = no ; browseable = no ; create mask = 0600 ; directory mask = 0700 [printers] comment = All Printers browseable = no path = /var/spool/samba printable = yes guest ok = no read only = yes create mask = 0700 # Windows clients look for this share name as a source of downloadable # printer drivers [print$] comment = Printer Drivers browseable = yes writeable = no path = /var/lib/samba/printers # Uncomment to allow remote administration of Windows print drivers. # You may need to replace 'lpadmin' with the name of the group your # admin users are members of. # Please note that you also need to set appropriate Unix permissions # to the drivers directory for these users to have write rights in it ; write list = root, @lpadmin # A sample share for sharing your CD-ROM with others. ;[cdrom] ; comment = Samba server's CD-ROM ; read only = yes ; locking = no ; path = /cdrom ; guest ok = yes # The next two parameters show how to auto-mount a CD-ROM when the # cdrom share is accesed. For this to work /etc/fstab must contain # an entry like this: # # /dev/scd0 /cdrom iso9660 defaults,noauto,ro,user 0 0 # # The CD-ROM gets unmounted automatically after the connection to the # # If you don't want to use auto-mounting/unmounting make sure the CD # is mounted on /cdrom # ; preexec = /bin/mount /cdrom ; postexec = /bin/umount /cdrom [mediafiles] path = /media/multimedia/

    Read the article

  • after new install 12.04 black screen with blinking cursor

    - by gregor
    I installed 12.04 and I got after boot black screen.Next I started in filesafe mode but filesafeX (all options)do not work(black screen.Then I started root shell , remounted rw HD and on prompt built xorg.conf with: $X -configure I have edited xorg.conf to delete obsolete monitors and screens. After reboot I get black screen with blinking cursor (no terminals) what can I do? how to edit xorg.conf when this could be a problem?## Heading ## hardware:radeon hd5470 and i3 with i915

    Read the article

  • Difficulty in running Tomcat v7.0 with Eclipse Juno

    - by user1673718
    I get the following error when I run my JSP file in Eclipse-Juno with Tomcat v7: 'starting Tomcat v7.0 server at localhost' has encountered a problem. Port 8080 required by Tomcat v7.0 server at localhost is already in use. The server may already be running in another process, or a system process may be using the port. To start this server you will need to stop the other process or change the port number(s). I have Oracle 10g installed in my System. When I type "http://localhost:8080" it opens the Oracle 10g license agreement so I think Oracle 10g is already running in that port. To change the port of Tomcat I tried Google, which said to change the port in the "C:\Program Files\Apache Software Foundation\Apache Tomcat 7.0.14\conf\httpd.conf" file But at "C:\Program Files\Apache Software Foundation\Apache Tomcat 7.0.14\conf" there was no httpd.conf file. I only have "catalina.policy,catalina.properties,context,logging.properties,server,tomcat-users,web" files in that conf folder. I use windows XP.

    Read the article

  • Install lubuntu 12.04 on an old Dell c600 : Video issues

    - by maniat1k
    I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. 01:00.0 VGA compatible controller: ATI Technologies Inc Rage Mobility M3 AGP 2x (rev 02) So I tryied the old xorg way to edit the missing resolution, but it does not work:... Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... UPDATE Updated to 12.04. This an edited xorg fr old dells like mine: # xorg.conf (X.Org X Window System server configuration file) # # This file was generated by dexconf, the Debian X Configuration tool, using # values from the debconf database. # # Edit this file with caution, and see the xorg.conf manual page. # (Type "man xorg.conf" at the shell prompt.) # # This file is automatically updated on xserver-xorg package upgrades *only* # if it has not been modified since the last upgrade of the xserver-xorg # package. # # If you have edited this file but would like it to be automatically updated # again, run the following command: # sudo dpkg-reconfigure -phigh xserver-xorg # xorg.conf for dell latitude c600 by A. Howlett and others Section "ServerLayout" Identifier "Default Server Layout" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" InputDevice "Generic Mouse" "AlwaysCore" EndSection Section "Files" RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "/usr/share/fonts/local" FontPath "/usr/share/fonts/misc" FontPath "/usr/share/fonts/75dpi:unscaled" FontPath "/usr/share/fonts/100dpi:unscaled" FontPath "/usr/share/fonts/Type1" FontPath "/usr/share/fonts/CID" FontPath "/usr/share/fonts/Speedo" FontPath "/usr/share/fonts/cyrillic" FontPath "/usr/share/fonts/artwiz-aleczapka" FontPath "/usr/share/fonts/TTF" FontPath "/usr/share/fonts/util" FontPath "/usr/local/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts" FontPath "/usr/share/fonts/aquafont" FontPath "/usr/share/fonts/artwiz" FontPath "/usr/share/fonts/artwiz-aleczapka-en" FontPath "/usr/share/fonts/corefonts" FontPath "/usr/share/fonts/freefont" EndSection Section "Module" Load "GLcore" Load "dbe" Load "dri" Load "extmod" Load "glx" Load "pex5" Load "record" Load "xie" Load "v4l" Load "freetype" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "keyboard" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "CorePointer" Option "Device" "/dev/psaux" Option "Protocol" "PS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Generic Mouse" Driver "mouse" Option "SendCoreEvents" "true" Option "Device" "/dev/input/mice" Option "Protocol" "ImPS/2" Option "Emulate3Buttons" "true" Option "ZAxisMapping" "4 5" EndSection Section "Monitor" Identifier "laptop LCD" VendorName "Dell" ModelName "Latitude C600" HorizSync 31.5-48.5 VertRefresh 40-70 EndSection Section "Device" Identifier "Video0" Driver "r128" VideoRam 8192 Option "EnablePageFlip" "true" Option "AGPFastWrite" "true" Option "AGPMode" "2" BusID "PCI:01:00:0" Screen 0 Option "Display" "FP" Option "MonitorLayout" "CRT, LFP" EndSection Section "Screen" Identifier "Screen0" Device "Video0" Monitor "laptop LCD" DefaultDepth 16 Subsection "Display" Depth 32 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection Subsection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "DRI" Mode 0666 EndSection

    Read the article

  • always purge on remove in package

    - by Jeroen
    Is there a way I can set my package to always automatically include a --purge whenever a user does a regular apt-get remove mypackage ? The reason is that I have some config files in /etc that should really be removed when the binaries are removed, otherwise it can lead to weird behavior. However I still want to treat them as conf files, i.e. make sure apt does not just wipe them on every upgrade of the package. But they should be removed when the package is uninstalled. Currently I am manually deleting the /etc conf files in my postrm script. However I just found out that this has a unfortunate side effect: if the user uninstalls and then later re-installs the package, the conf files won't be reinstalled, because apt thinks that they are still there. So is there a way I can manually trigger a full 'purge' in my postrm, such that apt knows that the conf files are gone?

    Read the article

  • XAMPP pointing a file outside root folder

    - by Ravi
    I am using XAMPP for first time in Mac. Running out problems accessing other than root folder(htdocs).when I am placing my web application inside htdocs with default httpd.conf file it works when I try to point my web application url in httpd.conf it throws error I am aware that to modify the root folder I need to do changes to my XAMPP/etc/httpd.conf file With Default XAMPP MAC Settings, I am trying to change Server root,Document root and Directory in XAMPP/etc/httpd.conf file the following ServerRoot "/Users/ravi/Documents/Development/Backbone/backboneboilerplate" DocumentRoot "/Users/ravi/Documents/Development/Backbone/backboneboilerplate" <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Deny from all </Directory> <Directory "/Users/ravi/Documents/Development/Backbone/backboneboilerplate"> Options Indexes FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> its throwing error when trying to start XAMPP httpd: Syntax error on line 54 of /Applications/XAMPP/xamppfiles/etc/httpd.conf: Cannot load /Users/ravi/Documents/Development/Backbone/backboneboilerplate/modules/mod_authn_file.so into server: cannot create object file image or add library

    Read the article

  • DNS client configuration steps in Oracle Solaris 11

    - by Gurubalan
    This guide covers Quick how to configure DNS client on Solaris 11. DNS client configuration in Solaris 11 is based on SMF service rather than file based. When you configure a system as DNS client, you will be performing the following two configurations. I. DNS client setup II. Configure Name service switch to use DNS I. DNS client setup 1. Configure using SMF service network/dns/client # svccfg -s network/dns/clientsvc:/network/dns/client> setprop config/search = astring: ("test.com" "service.test.com")svc:/network/dns/client> setprop config/nameserver = net_address: (192.168.10.10 192.168.10.11)svc:/network/dns/client> exit 2.  Enable the DNS client service (when you configure it for the first time) #svccfg enable -r dns/client 3. Restart/Refresh DNS client service (It is done when there is any update to the configuration) #svccfg refresh dns/client #svccfg restart dns/client 4. Verify /etc/resolv.conf if it is updated with the changes. # more /etc/resolv.conf ## _AUTOGENERATED_FROM_SMF_V1_## WARNING: THIS FILE GENERATED FROM SMF DATA.#   DO NOT EDIT THIS FILE.  EDITS WILL BE LOST.# See resolv.conf(4) for details.search               test.com service.test.comnameserver      192.168.10.10nameserver      192.168.10.11 --- II.  Configuring Name service switch to use DNS 1. Configure using SMF service  system/name-service/switch # svccfg -s system/name-service/switchsvc:/system/name-service/switch> setprop config/host = astring: "files dns"svc:/system/name-service/switch>exit 2.  Restart/Refresh name-service/switch service #svccfg refresh name-service/switch #svccfg restart  name-service/switch 3. Verfiy host entry in /etc/nsswitch.conf  is updated with dns. # more /etc/nsswitch.conf## _AUTOGENERATED_FROM_SMF_V1_## WARNING: THIS FILE GENERATED FROM SMF DATA.#   DO NOT EDIT THIS FILE.  EDITS WILL BE LOST.# See nsswitch.conf(4) for details.passwd: filesgroup:  fileshosts:  files dnsipnodes:        files dns . --- PS: Thank you ollasi for your motivation behind the screen.

    Read the article

  • Request Tracker 4.x on Ubuntu 12.04

    - by rihatum
    I have a Ubuntu 12.04 server installed on my machine. I am trying to install request-tracker4. Here's what I have done so far : a) Installed request-tracker via "sudo apt-get install request-tracker4" b) I then tried configuring RT_SiteConfig.pm in /etc/request-tracker4 but then ran into problems in populating the MySQL database. c) I then did sudo dpkg-reconfigure request-tracker4 d) It solved my problems of not being able to populate / setup mysql etc. e) Now, I am trying to setup rt under www.mydomain.com/rt I have read various how-to's and bestpractical's own guides but I am not very much a expert in Apache configurations so stuck. My Current Ubuntu 12.04 server setup: Apache2, Fastcgi installed (checked in /etc/apache2/mods-enabled Web Server document root is default /var/www/ Web user www-data Question is : 1 ) Where and What shall I put in Apache configuration to start using RT via the web-interface ? I have seen two files in /etc/request-tracker4/ apache2-fastcgi.conf and apache2-fcgid.conf I even tried making a ln -s apache2-fastcgi.conf /etc/apache2/conf.d but when I tried opening that file in root while in the conf.d directory it said too many levels. Any request tracker experts on ubuntu ?:-) Your help will be very useful and appreciated Thanks Please let me know if you need further info !

    Read the article

  • JkWorkersFile: Can't find the workers file specified

    - by Vasan
    I am trying to set up a simple horizonatal Tomcat clustering in windows XP. Have created a workers.properties file in conf/ directory next to httpd.conf file. However, when trying to start apache using httpd.exe, I am getting the below error. JkWorkersFile: Can't find the workers file specified httpd.conf has below entry: LoadModule jk_module modules/mod_jk.so JkLogFile "logs/mod_jk.log" JkLogLevel error JkMount /TestProject loadbalancer JkMount /TestProject/* loadbalancer JkWorkersFile conf/workers.properties I tried specifying the absoluate path as well i.e. JkWorkersFile "C:/Program Files/Apache Software Foundation/Apache2.2/conf/workers.properties" But still ended up with the same problem. Below are the entries from workers.properties workers.tomcat_home=$TOMCAT_HOME workers.java_home=$JAVA_HOME ps=/ worker.list=tomcatA,tomcatB,tomcatC,loadbalancer worker.tomcatA.port=8109 worker.tomcatA.host=localhost worker.tomcatA.type=ajp13 worker.tomcatA.lbfactor=1 worker.tomcatB.port=8209 worker.tomcatB.host=localhost worker.tomcatB.type=ajp13 worker.tomcatB.lbfactor=1 worker.tomcatC.port=8309 worker.tomcatC.host=localhost worker.tomcatC.type=ajp13 worker.tomcatC.lbfactor=1 worker.loadbalancer.type=lb worker.loadbalancer.balanced_workers=tomcatA,tomcatB,tomcatC worker.loadbalancer.sticky_session=1 Can anyone help me to resolve this please ?

    Read the article

  • Not attending the LUGM mini-meetup - 05. Oct 2013

    Not attending a meeting of the LUGM can be fun, too. It's getting a bit of a habit that Ish is organising small gatherings, aka mini-meetups, of the Linux User Group Mauritius/Meta (LUGM) almost every Saturday. There they mainly discuss and talk about various elements of using Linux as ones main operating systems and the possibilities you are going to have. On top of course, some tips & tricks about mastering the command line and initial steps in scripting or even writing HTML. In general, sounds like a good portion of fun and great spirit of community. Unfortunately, I'm usually quite busy with private and family matters during the weekend and so I already signalised that I wouldn't be around. Well, at least not physically... But this Saturday a couple of things worked out faster than expected and so I was hanging out on my machine. I made virtual contact with one of Pawan's messages over on Facebook... And somehow that kicked off some kind of an online game fun on basic configuration of Apache HTTPd 2.2.x, PHP 5.x and how to improve the overall performance of a newly installed blog based on WordPress. Default configuration files Nitin's website finally came alive and despite the dark theme and the hidden Apple 'fanboy' advertisement I was more interested in the technical situation. As with any new installation there is usually quite some adjustment to be done. And Nitin's page was no exception. Unfortunately, out of the box installations of Apache httpd and PHP are too verbose and expose too much information under the hood. You might think that this isn't really a problem at all, well, think about it again after completely reading this article. First, I checked the HTTP response headers - using either Chrome Developer Tools or Firefox Web Developer extension - of Nitin's page and based on that I advised him to lower the noise levels a little bit. It's not really necessary that detailed information about web server software and scripting language has to be published in every response made. Quite a number of script kiddies and exploits actually check for version specifics prior to an attack. So, removing at least version details hardens the system a little bit. In particular, I'm talking about these response values: Server X-Powered-By How to achieve that? By tweaking the configuration files... Namely, we are going to look into the following ones: apache2.conf httpd.conf .htaccess php.ini The above list contains some additional files, I'm talking about in the next paragraphs. Anyway, those are the ones involved. Tweaking Apache Open your favourite text editor and start to modify the apache2.conf. Eventually, you might like to have a quick peak at the file to see whether it is necessary to adjust it or not. Following is a handy combination of commands to get an overview of your active directives: # sudo grep -v '#' /etc/apache2/apache2.conf | grep -v '^$' | less There you keep an eye on those two Apache directives: ServerSignature Off ServerTokens Prod If that's not the case, change them as highlighted above. In order to activate your modifications you have to restart Apache httpd server. On Debian and Ubuntu you might use apache2ctl for that, on other distributions you might have to use service or run the init-scripts again: # sudo apache2ctl configtestSyntax OK# sudo apache2ctl restart Refresh your website and check the HTTP response header. Tweaking PHP5 (a little bit) Next, check your php.ini file with the following statement: # sudo grep -v ';' /etc/php5/apache2/php.ini | grep -v '^$' | less And check the value of expose_php = Off Again, if it's not as highlighted, change it... Some more Apache love Okay, back to Apache it might also be interesting to improve the situation about browser caching and removing more obsolete information. When you run your website against the usual performance checks like Google Page Speed and Yahoo YSlow you might see those check points with bad grades on a standard, default configuration. Well, this can be done easily. Configure entity tags (ETags) ETags are only interesting when you run your websites on a farm of multiple web servers. Removing this data for your static resources is very simple in Apache. As we are going to deal with the HTTP response header information you have to ensure that Apache is capable to manipulate them. First, check your enabled modules: # sudo ls -al /etc/apache2/mods-enabled/ | grep headers And in case that the 'headers' module is not listed, you have to enable it from the available ones: # sudo a2enmod headers Second, check your httpd.conf file (in case it exists): # sudo grep -v '#' /etc/apache2/httpd.conf | grep -v '^$' | less In newer (better said fresh) installations you might have to create a new configuration file below your conf.d folder with your favourite text editor like so: # sudo nano /etc/apache2/conf.d/headers.conf Then, in order to tweak your HTTP responses either check for those lines or add them: Header unset ETagFileETag None In case that your file doesn't exist or those lines are missing, feel free to create/add them. Afterwards, check your Apache configuration syntax and restart your running instances as already shown above: # sudo apache2ctl configtestSyntax OK# sudo apache2ctl restart Add Expires headers To improve the loading performance of your website, you should take some care into the proper configuration of how to leverage the browser's ability to cache certain resources and files. This is done by adding an Expires: value to the HTTP response header. Generally speaking it is advised that you specify a near-future, read: 1 week or a little bit more, for your static content like JavaScript files or Cascading Style Sheets. One solution to adjust this is to put some instructions into the .htaccess file in the root folder of your web site. Of course, this could also be placed into a more generic location of your Apache installation but honestly, I'd like to keep this at the web site level. Following some adjustments I'm currently using on this blog site: # Turn on Expires and set default to 0ExpiresActive OnExpiresDefault A0 # Set up caching on media files for 1 year (forever?)<FilesMatch "\.(flv|ico|pdf|avi|mov|ppt|doc|mp3|wmv|wav)$">ExpiresDefault A29030400Header append Cache-Control "public"</FilesMatch> # Set up caching on media files for 1 week<FilesMatch "\.(js|css)$">ExpiresDefault A604800Header append Cache-Control "public"</FilesMatch> # Set up caching on media files for 31 days<FilesMatch "\.(gif|jpg|jpeg|png|swf)$">ExpiresDefault A2678400Header append Cache-Control "public"</FilesMatch> As we are editing the .htaccess files, it is not necessary to restart Apache. In case that your web site doesn't load anymore or you're experiencing an error while trying to restart your httpd, check that the 'expires' module is actually an enabled module: # ls -al /etc/apache2/mods-enabled/ | grep expires# sudo a2enmod expires Of course, the instructions above a re not feature complete but I hope that they might provide a better default configuration for your LAMP stack. Resume of the day Within a couple of hours, and while being occupied with an eLearning course on SQL Server 2012, I had some good fun in helping and assisting other LUGM members while they were some kilometers away at Bagatelle. According to other blog articles it seems that Nitin had quite some moments of desperation. Just for the records: At no time it was my intention to either kick his butt or pull a leg on him. Simply, providing some input based on the lessons I've learned over the last couple of years configuring Apache HTTPd and PHP. Check out the other blogs, too: LUGM mini-meetup... Epic! Superb Saturday Linux Meetup And last but not least, the man himself: The end of a new beginning Cheers, and happy community'ing! Updates Due to our weekly Code & Coffee sessions in the MSCC community, I had a chance to talk to Nitin directly and he showed me the problems directly on his machine. This led to update this article hence the paragraphs on enabling the modules 'headers' and 'expires'.

    Read the article

  • Cannot ping router with a static IP assigned?

    - by Uriah
    Alright. I am running Ubuntu LTS 12.04 and am trying to configure a local caching/master DNS server so I am using Bind9. First, here are some things via default DHCP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # The primary network interface - STATIC #auto eth0 #iface eth0 inet static # address 192.168.2.113 # netmask 255.255.255.0 # network 192.168.2.0 # broadcast 192.168.2.255 # gateway 192.168.2.1 # dns-search uclemmer.net # dns-nameservers 192.168.2.113 8.8.8.8 /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 search uclemmer.net ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.103 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1067 errors:0 dropped:0 overruns:0 frame:0 TX packets:2504 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:153833 (153.8 KB) TX bytes:214129 (214.1 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:915 errors:0 dropped:0 overruns:0 frame:0 TX packets:915 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:71643 (71.6 KB) TX bytes:71643 (71.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. 64 bytes from 192.168.2.1: icmp_req=1 ttl=64 time=0.368 ms 64 bytes from 192.168.2.1: icmp_req=2 ttl=64 time=0.224 ms 64 bytes from 192.168.2.1: icmp_req=3 ttl=64 time=0.216 ms 64 bytes from 192.168.2.1: icmp_req=4 ttl=64 time=0.237 ms --- 192.168.2.1 ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 2997ms rtt min/avg/max/mdev = 0.216/0.261/0.368/0.063 ms ping -c 4 google.com PING google.com (74.125.134.102) 56(84) bytes of data. 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=1 ttl=48 time=15.1 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=2 ttl=48 time=11.4 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=3 ttl=48 time=11.6 ms 64 bytes from www.google-analytics.com (74.125.134.102): icmp_req=4 ttl=48 time=11.5 ms --- google.com ping statistics --- 4 packets transmitted, 4 received, 0% packet loss, time 3003ms rtt min/avg/max/mdev = 11.488/12.465/15.118/1.537 ms ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.103 As you can see, with DHCP everything seems to work fine. Now, here are things with static IP: /etc/network/interfaces cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary network interface #auto eth0 #iface eth0 inet dhcp # The primary network interface - STATIC auto eth0 iface eth0 inet static address 192.168.2.113 netmask 255.255.255.0 network 192.168.2.0 broadcast 192.168.2.255 gateway 192.168.2.1 dns-search uclemmer.net dns-nameservers 192.168.2.1 8.8.8.8 I have tried dns-nameservers in various combos of *.2.1, *.2.113, and other reliable, public nameservers. /etc/resolv.conf cat /etc/resolv.conf # Dynamic resolv.conf(5) file for glibc resolver(3) generated by resolvconf(8) # DO NOT EDIT THIS FILE BY HAND -- YOUR CHANGES WILL BE OVERWRITTEN nameserver 192.168.2.1 nameserver 8.8.8.8 search uclemmer.net Obviously, when I change the nameservers in the /etc/network/interfaces file, the nameservers change here too. ifconfig ifconfig eth0 Link encap:Ethernet HWaddr 00:14:2a:82:d4:9e inet addr:192.168.2.113 Bcast:192.168.2.255 Mask:255.255.255.0 inet6 addr: fe80::214:2aff:fe82:d49e/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1707 errors:0 dropped:0 overruns:0 frame:0 TX packets:2906 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:226230 (226.2 KB) TX bytes:263497 (263.4 KB) Interrupt:23 Base address:0x8800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:985 errors:0 dropped:0 overruns:0 frame:0 TX packets:985 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:78625 (78.6 KB) TX bytes:78625 (78.6 KB) ping ping -c 4 192.168.2.1 PING 192.168.2.1 (192.168.2.1) 56(84) bytes of data. --- 192.168.2.1 ping statistics --- 4 packets transmitted, 0 received, 100% packet loss, time 3023ms ping -c 4 google.com ping: unknown host google.com Lastly, here are my bind zone files: /etc/bind/named.conf.options cat /etc/bind/named.conf.options options { directory "/etc/bind"; // // // query-source address * port 53; notify-source * port 53; transfer-source * port 53; // If there is a firewall between you and nameservers you want // to talk to, you may need to fix the firewall to allow multiple // ports to talk. See http://www.kb.cert.org/vuls/id/800113 // If your ISP provided one or more IP addresses for stable // nameservers, you probably want to use them as forwarders. // Uncomment the following block, and insert the addresses replacing // the all-0's placeholder. // forwarders { // 0.0.0.0; // }; forwarders { // My local 192.168.2.113; // Comcast 75.75.75.75; 75.75.76.76; // Google 8.8.8.8; 8.8.4.4; // DNSAdvantage 156.154.70.1; 156.154.71.1; // OpenDNS 208.67.222.222; 208.67.220.220; // Norton 198.153.192.1; 198.153.194.1; // Verizon 4.2.2.1; 4.2.2.2; 4.2.2.3; 4.2.2.4; 4.2.2.5; 4.2.2.6; // Scrubit 67.138.54.100; 207.255.209.66; }; // // // //allow-query { localhost; 192.168.2.0/24; }; //allow-transfer { localhost; 192.168.2.113; }; //also-notify { 192.168.2.113; }; //allow-recursion { localhost; 192.168.2.0/24; }; //======================================================================== // If BIND logs error messages about the root key being expired, // you will need to update your keys. See https://www.isc.org/bind-keys //======================================================================== dnssec-validation auto; auth-nxdomain no; # conform to RFC1035 listen-on-v6 { any; }; }; /etc/bind/named.conf.local cat /etc/bind/named.conf.local // // Do any local configuration here // // Consider adding the 1918 zones here, if they are not used in your // organization //include "/etc/bind/zones.rfc1918"; zone "example.com" { type master; file "/etc/bind/zones/db.example.com"; }; zone "2.168.192.in-addr.arpa" { type master; file "/etc/bind/zones/db.2.168.192.in-addr.arpa"; /etc/bind/zones/db.example.com cat /etc/bind/zones/db.example.com ; ; BIND data file for example.com interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 192.168.2.113 @ IN AAAA ::1 @ IN MX 10 yossarian.example.com. ; yossarian IN A 192.168.2.113 router IN A 192.168.2.1 printer IN A 192.168.2.200 ; ns01 IN CNAME yossarian.example.com. www IN CNAME yossarian.example.com. ftp IN CNAME yossarian.example.com. ldap IN CNAME yossarian.example.com. mail IN CNAME yossarian.example.com. /etc/bind/zones/db.2.168.192.in-addr.arpa cat /etc/bind/zones/db.2.168.192.in-addr.arpa ; ; BIND reverse data file for 2.168.192.in-addr interface ; $TTL 604800 @ IN SOA yossarian.example.com. root.example.com. ( 1343171970 ; Serial 604800 ; Refresh 86400 ; Retry 2419200 ; Expire 604800 ) ; Negative Cache TTL ; @ IN NS yossarian.example.com. @ IN A 255.255.255.0 ; 113 IN PTR yossarian.example.com. 1 IN PTR router.example.com. 200 IN PTR printer.example.com. ip route ip route default via 192.168.2.1 dev eth0 metric 100 192.168.2.0/24 dev eth0 proto kernel scope link src 192.168.2.113 I can SSH in to the machine locally at *.2.113 or at whatever address is dynamically assigned when in DHCP "mode". *2.113 is in my router's range and I have ports open and forwarding to the server. Pinging is enabled on the router too. I briefly had a static configuration working but it died after the first reboot. Please let me know what other info you might need. I am beyond frustrated/baffled.

    Read the article

  • Suddely internet is not accessible

    - by user189708
    I am going crazy here. One day everything was working fine. I turned pc off and went to sleep. Next day turn pc on and cannot access internet (from any browser). The situation is: I cannot open any webpage from browser (tried Firefox and Epiphany) and cannot receive emails in thunderbird. BUT if I run firefox from console as sudo, I can use it as usual. I can access Skype and pretty much any other network stuff (like installing software with apt-get etc.), also if I use Astrill VPN software I can access webpages even running without sudo. I haven't install any software or anything like that for several days = I have not a clue what could cause this. Just by the way, other Win PC in our home has no issue. Here is what I have tried to fix this: I have tried to restart my pc, router, modem - multiple times I have tried to change permissions to my firefox profile I have tried to completely re-install firefox and start with blank profile, thus no addons I have tried to change /etc/resolv.conf to an IP of my router (it was 127.0.1.1) I have tried to change my hostname (from tomino-NB to tominoNB) I think I might try even more stuff. None of it works. Can someone please try to help me. Thank you UPDATE 1: I have tried this: Removing resolv.conf - Didn't help Also "ping" and "dig" commands cannot resolve host UPDATE 2: I have tried to edit nameservers in resolv.conf but still no effect. I can ping router as well as I can ping outside IP. So definitely just some DNS issue. Is it possible that something is rewriting path to resolv.conf and using different file? UPDATE 3: I have just restarted PC and everything works now... resolv.conf went back to nameserver 127.0.1.1 . I have no clue what happened that it works again...

    Read the article

  • Switching to Kubuntu results in low graphics mode

    - by HackToHell
    I looked at some screen shots of Kubuntu and I liked it so I went to Synaptic and installed the kubuntu-desktop package and set my desktop window manager to kde and rebooted. After reboot, I saw Kubuntu splash screen then this message; running in Low Graphical Mode. Then I was not able to dismiss the message because my mouse did not work Seemingly How to Geek had the same problem http://www.howtogeek.com/howto/ubuntu/install-kde-kubuntu-on-ubuntu/ . You will probably see that your xorg.conf file was backed up to xorg.conf.1 during the ?KDE / Kubuntu installation. Just copy the xorg.conf.1 back to xorg.conf, reboot, and everything should be fine. I also tried to do that by booting into recovery mode and then droping onto the shell. But it would not let me rename, came up with some error.

    Read the article

  • Plesk 9 - unable to modify atmail vhost template

    - by Ben
    Running into a small issue recently that causes my server's atmail to fail authenticating users. I gathered from a web search that it's because i recently enabled apc on the server. I've found some reference mentioning I need to modify the atmail vhost template, but that reference is for Plesk 10 (i'm on 9). The atmail config isn't in the same spot. I've found this unrelated topic that explains how to modify the vhost settings for atmail on plesk 9, which I have done (adding php_admin_flag apc.enabled off to it). I then recompiled the server config using /usr/local/psa/admin/bin/websrvmng -a but it doesn't seem to pick up the changes. If I look at /etc/httpd/conf.d/zzz_atmail_vhost.conf after recompiling it still doesn't show the apc settings. Summary of steps taken: Modified /etc/psa-webmail/atmail/atmail_vhost.conf and added php_admin_flag register_globals off to the config Recompiled with /usr/local/psa/admin/bin/websrvmng -a Checked /etc/httpd/conf.d/zzz_atmail_vhost.conf But no changes. What am I missing?

    Read the article

  • Kubuntu 11.10 disable tapclick not working from gui

    - by Star
    Trying to find the script that disables tap-to-click, but can't locate the right settings. here is 50-synaptic.conf: # Example xorg.conf.d snippet that assigns the touchpad driver # to all touchpads. See xorg.conf.d(5) for more information on # InputClass. # DO NOT EDIT THIS FILE, your distribution will likely overwrite # it when updating. Copy (and rename) this file into # /etc/X11/xorg.conf.d first. # Additional options may be added in the form of # Option "OptionName" "value" # Section "InputClass" Identifier "touchpad catchall" Driver "synaptics" MatchIsTouchpad "on" # This option is recommend on all Linux systems using evdev, but cannot be # enabled by default. See the following link for details: # http://who-t.blogspot.com/2010/11/how-to-ignore-configuration-errors.html MatchDevicePath "/dev/input/event*" EndSection Any ideas would be gratefully received, it's driving me mad!

    Read the article

  • mod_wsgi for multiple trac projects [Windows]

    - by fampinheiro
    Hello, I have a system with windows server 2008, Apache httpd 2.2 and trac 0.11 i'm using mod_wsgi so the apache server do the web server job. Integration with Trac after read this site i found that the most suitable solution was the following (i have in my httpd.conf the line Include conf/extra/httpd-trac.conf) httpd-trac.conf LoadModule wsgi_module modules/mod_wsgi.so WSGIDaemonProcess tracs processes=3 threads=25 maximum-requests=1000 RewriteEngine On RewriteCond %{REQUEST_URI} ^/trac/([^/]+) RewriteCond c:\Project\Services\Trac\%1\conf\trac.ini !-f RewriteRule . - [F] RewriteCond %{REQUEST_URI} ^/trac/([^/]+) RewriteRule . - [E=trac.env_path:c:\Project\Services\Trac\%1] WSGIScriptAliasMatch ^/trac/([^/]+) c:\Project\Trac\trac.wsgi <Directory c:\Project\Trac> WSGIProcessGroup tracs WSGIApplicationGroup %{GLOBAL} Order deny,allow Allow from all </Directory> the problem i encouter is the following: C:\Project\Apache\binhttpd.exe -k start Syntax error on line 3 of C:/Project/Apache/conf/extra/httpd-trac.conf: Invalid command 'WSGIDaemonProcess', perhaps misspelled or defined by a module not included in the server configuration The objective: My objective is to have multiple trac projects with diferente authentication information. If you have other solution than this please tell me =) Thank you for your help.

    Read the article

  • First run notepad with my.cfg and only then start the service

    - by Viv Coco
    Hi all, I install along with my application: 1) a service that starts and stops my application as needed 2) a conf file that contains actually the user data and that will be shown to the user to modify as needed (I give the user the chance to change it by running notepad.exe with my conf file during installing) The problem is that in my code the service I install starts before the user had the chance to modify the conf file. What I would like is: 1) first the user gets the chance to change the conf file (run notepad.exe with the conf file) 2) only afterward start the service <Component Id="MyService.exe" Guid="GUID"> <File Id="MyService.exe" Source="MyService.exe" Name="MyService.exe" KeyPath="yes" Checksum="yes" /> <ServiceInstall Id='ServiceInstall' DisplayName='MyService' Name='MyService' ErrorControl='normal' Start='auto' Type='ownProcess' Vital='yes'/> <ServiceControl Id='ServiceControl' Name='MyService' Start='install' Stop='both' Remove='uninstall'/> </Component> <Component Id="my.conf" Guid="" NeverOverwrite="yes"> <File Id="my.cfg" Source="my.cfg_template" Name="my.cfg" KeyPath="yes" /> </Component> [...] <Property Id="NOTEPAD">Notepad.exe</Property> <CustomAction Id="LaunchConfFile" Property="NOTEPAD" ExeCommand="[INSTALLDIR]my.cfg" Return="ignore" Impersonate="no" Execute="deferred"/> <!--Run only on installs--> <InstallExecuteSequence> <Custom Action='LaunchConfFile' Before='InstallFinalize'>(NOT Installed) AND (NOT UPGRADINGPRODUCTCODE)</Custom> </InstallExecuteSequence> What am I doing wrong in the above code and how could I change it in order to achieve what I need? (first run notepad with my conf file and then start the service). TIA, Viv

    Read the article

  • using mod-rewrite to redirect requests for jquery.js to GoogleAPI cache

    - by Aditya Advani
    Hi All, Our Linux server with Apache 2.x, Plesk 8.x hosts a number of e-commerce websites. To take advantage of browser caching we would like to use Google's provided copy of jquery.js. Hence in the vhost.conf file of each we can use the following RewriteRule RewriteCond %{REQUEST_FILENAME} jquery.min.js [nc] RewriteRule . http://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js [L] And in vhost_ssl.conf RewriteCond %{REQUEST_FILENAME} jquery.min.js [nc] RewriteRule . https://ajax.googleapis.com/ajax/libs/jquery/1.4/jquery.min.js [L] OK now these rules work fine in the individual vhost.conf files of each domain. However we host over 200 domains, I would like for them to work but cannot seem to get them to work globally in the httpd.conf file. Challenges are the following: Get the rewriterule to work in httpd.conf Detect if HTTPS is on, and if it is and the is is a secure page, rewrite to ... Each individual domain will still have it's own custom mod-rewrite rules. Which rules take precedence - global or per-domain? Do they combine? Is it ok if I have the "RewriteEngine On" directive in the global httpd.conf and then again in the vhost.conf? Please let me know what your guys' suggestions are. Desperate for a solution to this problem.

    Read the article

  • Strange permission errors in new PostgreSQL installation

    - by Bart van Heukelom
    A freshly installed PostgreSQL (with configuration overwritten) won't start: $ sudo service postgresql start * Starting PostgreSQL 9.1 database server * Error: could not read /etc/postgresql/9.1/main/postgresql.conf: Permission denied Looks like it should be able to read it though: $ ls -l postgresql.conf -rw------- 1 postgres postgres 19450 2012-06-14 10:07 postgresql.conf But fine, I'll add chmod +r it to test if that works. $ sudo chmod +r postgresql.conf $ sudo service postgresql start * Starting PostgreSQL 9.1 database server * The PostgreSQL server failed to start. Please check the log output: Error: Could not open log file /var/log/postgresql/postgresql-9.1-main.log Huh? $ ls -l /var/log/postgresql/ total 4 -rw-r----- 1 postgres adm 827 2012-06-14 10:07 postgresql-9.1-main.log I don't get it. What can be wrong here? This used to work before. Can I maybe monitor what process attempts to open the file? It's Ubuntu 11.10 on EC2, using Chef. For completeness, here's the recipe: # Install PostgreSQL package "postgresql-9.1" # Stop server service "postgresql" do action :stop end # Overwrite configuration (setting data dir) template "/etc/postgresql/9.1/main/postgresql.conf" do source "postgresql-conf.erb" owner "postgres" group "postgres" end # Start server service "postgresql" do action :start end

    Read the article

  • MAMP - Host name changes to first vhost SSL entry for project with two localhosts

    - by user1322092
    I have two projects that are a copy of each other on my Mac with MAMP. They both have SSL pages. However, whenever I hit the a secured SSL page of project 2, the base_url or host changes to project1 instead of remaining project2. I know this is an issue with the vhosts, because if I switch the order of the entries, the reverse happens. Here's my config files: /Applications/MAMP/conf/extra/httpd-ssl.conf <VirtualHost _default_:443> DocumentRoot "/Applications/MAMP/htdocs/proj1" ServerName proj1.localhost:443 ErrorLog "/Applications/MAMP/Library/logs/error_log" TransferLog "/Applications/MAMP/Library/logs/access_log" SSLEngine on SSLCertificateFile "/Applications/MAMP/conf/apache/ssl/server.crt" SSLCertificateKeyFile "/Applications/MAMP/conf/apache/ssl/server.key" </VirtualHost> <VirtualHost _default_:443> DocumentRoot "/Applications/MAMP/htdocs/proj2" ServerName proj2.localhost:443 ErrorLog "/Applications/MAMP/Library/logs/error_log" TransferLog "/Applications/MAMP/Library/logs/access_log" SSLEngine on SSLCertificateFile "/Applications/MAMP/conf/apache/ssl/server.crt" SSLCertificateKeyFile "/Applications/MAMP/conf/apache/ssl/server.key" </VirtualHost> -------------------- cat /etc/hosts ## # Host Database # # localhost is used to configure the loopback interface # when the system is booting. Do not change this entry. ## 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 proj1.localhost 127.0.0.1 proj2.localhost

    Read the article

  • Snort/Barnyard2 Logging

    - by Eric
    I need some help with my Snort/Barnyard2 setup. My goal is to have Snort send unified2 logs to Barnyard2 and then have Barnyard2 send the data to other locations. Here is my currrent setup. OS Scientific Linux 6 Snort Version 2.9.2.3 Barnyard2 Version 2.1.9 Snort command snort -c /etc/snort/snort.conf -i eth2 & Barnyard2 command /usr/local/bin/barnyard2 -c /etc/snort/barnyard2.conf -d /var/log/snort -f snort.log -w /var/log/snort/barnyard.waldo & snort.conf output unified2: filename snort.log, limit 128 barnyard2.conf output alert_syslog: host=127.0.0.1 output database: log, mysql, user=snort dbname=snort password=password host=localhost With this setup, barnyard2 is showing all of the correct information in the database and I'm using BASE to view it on the web GUI. I was hoping to be able to send the full packet data to syslog with barnyard2 but after reading around, it seems that it is impossible to do that. So I then started trying to modify the snort.conf file and add lines like "output alert_full: alert.full". This definitely gave me a lot more information but still not the full packet data like I want. So my question is, is there anyway I can use barnyard2 to send the full packet data of alerts to a human readable file? Since I can't send it directly to syslog, I can create another process to take the data from that file and ship it off to another server. If not, what flags and/or snort.conf configuration would you recommend to get the most data possible but still be able to handle quite a bit of traffic? In the end of it all, these alerts will be shipped to a central server via a SSH tunnel. I'm trying to stay away from databases.

    Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >