Search Results

Search found 21398 results on 856 pages for 'display adapter'.

Page 20/856 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• USB to LPT adapter?

  - by Dave

  I'm bummed out, pretty much all of our computers here lack parallel ports. I have an EETools ChipMax programming tool that has one of the old-school Centronics connectors on the back. I figured that someone must make a USB to LPT adapter. Sure enough, I found one from iogear, the GUC1284B that is a USB to Parallel Printer cable. Note the boldface on the Printer. It must connect to a printer -- it isn't some generic USB to parallel interface, unfortunately. Does anyone here know of an adapter that works for parallel devices that aren't printers? I'd hate to have to buy a USB version of the ChipMax when I don't need to use it very much.

  Read the article

• Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

  - by yothenberg

  I have a Dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas?

  Read the article

• MaxiVista alternative for extending desktop onto another laptop's display? [closed]

  - by Suan

  Possible Duplicate: Can I use my laptop as a second monitor for my desk computer? Am I wrong when I say that apart from MaxiVista, there is currently no way to do this? Or perhaps there is some combination of using VNC with something else to achieve this? If there is no way, does anybody know if there are any open source projects working on this problem? Thanks!

  Read the article

• Dell R910 with Integrated PERC H700 Adapter

  - by Alex

  I am in the process of designing an architecture based around a single Dell R910 server running Windows Server 2008 Enterprise. I would like the server to have 8 RAID1 pairs of spinning disks, so I intend to implement: Dell R910 Server Integrated PERC H700 Adapter with 1 SAS expander on each SAS connector (so 8 expanders in total) 7 RAID1 pairs of 143Gb 15K HDD, each paired on one connector using an expander 1 RAID1 pair of 600Gb 10K HDD, paired on the remaining connector using an expander My main concern is not to introduce bottlenecks in this architecture, and I have the following questions. Will the PERC H700 Adapter act as a bottleneck for disk access? Will using SAS expanders for each RAID1 pair cause a bottleneck or would this be as fast as pairing disks directly attached to the SAS connectors? Can I mix the disks, as long as the disks in each RAID1 pair are the same? I assume so. Can anyone recommend any single-to-double SAS Expanders that are known to function well with the H700? Cheers Alex

  Read the article

• Dell PR03X port replicator and DisplayPort to DVI adapter not detecting second monitor

  - by yothenberg

  Hi, I have a dell M4400 connected to a PR03X port replicator/docking station. I use the DVI port to connect it to a first Dell 2208WFP monitor and I'm trying to use a DisplayPort-to-DVI adapter to connect it to a second Dell 2208WFP monitor. The second monitor, connected via the DisplayPort-to-DVI adapter immediately goes into sleep mode and the laptop doesn't detect it. What is really weird is that it did detect it the first time I plugged it in but after I unplugged the monitor and plugged it back in it stopped working. I swapped the monitors round and it detected them both but after unplugging the monitor connected via the DisplayPort-to-DVI and plugging it in again it stopped working. Both monitors work if plugged in directly to the DVI port. Is there some way to force re-detection? Any ideas? Thanks, Mark

  Read the article

• USB to IDE/SATA adapter

  - by unknown (google)

  I have an old IDE HDD that I am trying to pull files off of. I am using a USD to IDE/SATA adapter. I plug in the power and adapter plugs into the drive and it fires up. I plug the USB plug into my XP laptop and it installs the drivers. I can see USB Mass Storage Device under Device Manager. My problem is I can't see the drive in either Windows Explorer or under Disk Management under Computer Management. Not sure what I am doing wrong. Do I have to slave the old hdd? Do I have to make BIOS changes?

  Read the article

• RGB to DVI adapter not working for Projector-to-PC

  - by user897052

  We have a wall-mounted projector (dell 4320) with VGA In and the other end of the cable is RGB. We have an RGB to DVI-I adapter (w/ DIP switches) inorder to plug the cable into a PC (video card has 1 VGA and 1 DVI-I port). We had no problems until recently, when the PCs hard drive crashed. After re-imaging the PC, the computer no longer "sees" the projector (the computer doesn't detect the projector as a second monitor anymore). The PC is an older Dell with an after-market video card and runs win XP. I also tried it on a new HP box (win 7), but had to add a DVI-I to DVI-D adapter. Any ideas?

  Read the article

• VirtualBox "Bridged Adapter" when host NIC is turned off

  - by chris_l

  Hi, I'm running Linux (Debian Etch) in a VirtualBox VM on my MacBook. I usually ssh from my Mac terminal to the guest machine. I also want to access the internet from my guest, so I set up my host's WLAN card (en1) as a bridged adapter for eth0 on the client. This works fine, but when I turn off the WLAN card (e.g. to reduce battery consumption), I'd still like to ssh from my host to the guest. This fails of course, because en1 loses its IP address. Is a bridged adapter the best option for what I want to do? How can I make it work? (A simple "ifconfig en1 add 10.0.0.4" didn't do the trick...) Thanks Chris

  Read the article

• Get the wireless adapter frequency-band mode in Windows 7

  - by Petr

  I have a dual-band 802.11n router operating in both frequency bands with the same SSID. My Windows 7 laptop has a dual-band wireless adapter. Is there a way to find out which frequency band is the one currently used by the client? Also, is there a way to set the preffered band? Thanks. EDIT1: The router is Linksys E4200 (V2) and I essentially want to keep the 2.4GHz band in the mixed-mode so that the legacy 802.11g devices can connect while allocating the 5.0GHz band for 802.11n devices. The laptop's adapter (Intel Centrino Ultimate-N 6300 ANG) can operate in both 802.11n modes. EDIT2: Related topic

  Read the article

• HP laptop won't recognize wireless adapter

  - by Dennis Williamson

  I have an HP Pavilion dv6400 series laptop with an NVidea chipset which is the subject of a class action lawsuit. The symptom (PDF) that I'm experiencing is that the system fails to recognize that there is a wireless adapter installed. It doesn't appear in Device Manager. Is there some way, short of installing a new adapter, that I can work around this problem? The system is running Windows Vista Home and has the latest BIOS (F42) and Windows updates and drivers. See this related question where I ask how to use an old Windows Mobile phone as a Wi-Fi (not cellular data) tether.

  Read the article

• Debian 5.0.8 won't detect my ethernet adapter

  - by PaulH

  I'm installing Debian 5.0.8 on a Dell Latitude E6410 using the network install x86 CD. Unfortunately, it won't detect my Ethernet adapter. Specifically, I get the error: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list. lspci shows: 00:19.0 Ethernet controller: Intel Corporation Device 10ea (rev 05) That should correspond to the e100e driver. But, if I select it from the list, the install CD still fails to detect it. Ubuntu 10.10 and Windows 7 are able to use this device with no problem. Does anybody know what I can do to make Debian use my Ethernet adapter? Thanks, PaulH

  Read the article

• In Windows 7, why won't my display stay off despite the power settings saying it should?

  - by Jer

  I'm completely stumped by this. My simple use case is that when I'm in bed, I use a cordless mouse to browse the web, watch videos, etc. - the monitor is across the room. When I'm going to sleep, I want to shut the monitor off. I also want to be able to turn it back on in the morning. I just want to turn the monitor off and on using only the mouse. I thought of creating a power setting that turned the monitor off asap (the shortest amount of time is one minute; that's fine). I have one that does this. It worked great for almost a year on my old XP machine, and for about four months on my new Windows 7 laptop (which I essentially use as a desktop). All of a sudden a couple weeks ago, it just stopped working - my monitor won't turn off on its own anymore. Here are the settings: I tried other options. Based on the advice here I tried nircmd. This seemed great. I created a shortcut with the command line: "C:\Program Files\nircmd\nircmd.exe" cmdwait 1000 monitor off I click this, and in one second the monitor goes off. However about five seconds later it turns back on, and I've been extra careful to make sure the mouse isn't moving. I have no idea what's going on. Based on both of these things, my only guess is that something could be running in the background which somehow makes the computer think it's in use. I've tried killing as many programs as possible but I still get the same behavior. Any advice? I'm mainly curious about how to debug, but am open to other suggestions about turning the monitor off and on with just the mouse as well.

  Read the article

• Configure PL2303-based USB-to-RS232 adapter to stay awake when no active device is present

  - by casualuser

  I am resurrecting some X10 devices with the aid of a USB-to-RS232 adapter. The problem is, that the adapter only works with the Firecracker device when there is another serial device on the line (the Firecracker is a pass-through device that monitors the RTS and DTR lines to do its magic). Is the PL2303 going to sleep without a real device on the line? Is there an option or command to keep it awake? Is there a cable configuration that would make it work without a real serial device present?

  Read the article

• How to use a D-Link usb network adapter on debian

  - by Barranka

  I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

  Read the article

• Wireless adapter won't enable

  - by user52141

  I bought a d-link dwa-125, plugged it in and windows recognized it right away and said everything was good to go. But there were no connection options. When I open up the network control panel and have it show me the adapters... the wireless adapter is greyed out and says it is disabled. So I tell it to enable. It says is it enabling, then says it is enabled... but the adapter stayed greyed out saying disabled. I am running 7 x64. I have reinstalled drivers, connected it via lan and had it update drivers.. same problem. It works just fine on any other computer in the house, just not this one.

  Read the article

• windows 7 virtual wireless adapter keeps going to sleep

  - by conners

  Just a quick question that I can't see mentioned anywhere online. I have a Windows 7 box configured like these guys recommend http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/ simply so that I can have my Windows 7 box as a wifi access point or a wifi emitter. It's also called a Microsoft Virtual WiFi Miniport Adapter. But it powers off and shuts down automatically and stops working. Basically everything works as intended and then - well -it will stopped working when I am not at the Windows 7 PC for a long time. The problem seems to be that every time my PC goes to "power save / sleep" and in the morning the Windows 7 machine "wakes" but blooming heck the wifi has stopped and you have to power cycle the PC (which is very uncool). When I power Cycle I have to do the following as administrator C:\Windows\System32\netsh.exe wlan start hostednetwork I then tried a gazllion things involving services and power management and eventually discovered that if I run the following commands as administrator it will be ok (for a bit) but every 3rd ot 4th time I try this "trick" it simply fails. the trick that seems to work 3 out of 4 times (i.e. "most" of the time) C:\Windows\System32\netsh.exe wlan stop hostednetwork C:\Windows\System32\netsh.exe wlan start hostednetwork But why does this only work "some" of the time? What else I did by myself: on every manage adapter properties (that relates to the wifi) I right clicked [configure] [power management] /disabled/ "allow the computer to power off to save power" <- this made no difference Also (and this is a bit annoying) there is no system tray app/GUI for the Microsoft Virtual WiFi Miniport Adapter output signal ... none... so (lame as it sounds) the ONLY way I can check if it's on is to physically go to another device and SCAN.. lame so my question can probably be solved by any of the following: a) can I stop Windows 7 sleeping this wifi when the machine sleeps b) can I force Windows to force wake this process on wake? if so how? c) what is the service / process REALLY called and how do I restart it if it crashes d) how can I flush the wifi properly rather power cycle the host machine e) anyone have a link to an program or app that can sit in the system tray that shows windows 7 wifi hotspot emission status (on/off/etc etc) Since I am a programmer I can easily write a vbs script / windows exe to fix this (and I will share this solution) and the gui problem if I can work out the actual service that is running that netsh stops/starts

  Read the article

• Why Internet Explorer can not display an image on the site?

  - by Emanuel

  I have a site that is managed with Joomla. I want to display an image in one of my articles but that image can not be viewed in Internet Explorer but other browsers can display it, although the path is ok. I miss something? Link: http://ascorbrasov.ro/images/stories/necula_ctin2.jpg Html: <img src="/images/stories/constantin_necula2.jpg" border="0" title="Constantin Necula - Conferinta" /> Thanks

  Read the article

• How to display an array's content in colomns, like ls -C does.

  - by Arko

  I wanted to display a long list of strings from an array. Right now, my script run through a for loop echoing each value to the standard output: for value in ${values[@]} do echo $value done Yeah, that's pretty ugly! And the one column listing is pretty long too... I was wondering if i can find a command or builtin helping me to display all those values in columns, like the ls command does by default when listing a directory (ls -C).

  Read the article

• Tempescope Displays Weather by Recreating It

  - by Jason Fitzpatrick

  Yesterday we showed you an umbrella stand that signals raining/clear skies by color, today we have something even more interesting: an ambient desktop weather station that recreates the outside weather. The Tempescope pulls down the current weather report from Weather Underground’s API and feeds it to an Arduino board which in turn controls the device. When it’s raining, it pumps water down to simulate rain in the chamber. When there is lightening, LEDs flash. When there is cloud cover, an ultrasonic generator creates a fine mist inside the cylinder. Finally, on sunny days the entire thing glows warmly. To say that we want one would be an understatement. Hit up the link below to read more about the project, the display modes, and to peek inside the device. Prototyping “Tempescope”, An Ambient Weather Display [via Hack A Day] How To Delete, Move, or Rename Locked Files in Windows HTG Explains: Why Screen Savers Are No Longer Necessary 6 Ways Windows 8 Is More Secure Than Windows 7

  Read the article

• Dual monitor, with a low resolution projector

  - by user900978

  I need to show a presentaion to a conference tomorrow. Today I tryed my Ubuntu 10.04 with the projector. My notebook has a resolution of 1440x960, the projector seems to have a really lower resolution. However, thanks to nvidia-settings I configured my video card (a nvidia 9800), it works with other display, but not with the projector. I found the projector, configured as Twin-view, resolution Auto and pressed on Apply, then "Save to x Configuration". On projector is visualized just a quarter of my notebook display. I tryed also to reduce my resolution and to change the resolution of projector, but I obtained no better results. How can I Solve it? On windows all goes well, but I need Ubuntu for personal reasons. Thanks in advance

  Read the article

• How do I change my 1080p external monitor from portrait to landscape on an Eee PC 1000H?

  - by Acky

  Hi I have an EeePC 1000H netbook with a Samsung T22A350 1080p 22" external monitor. I've just installed Ubuntu 12.04 and I mainly use the external display but when I select 1080 from the dropdown list, my only options are for a rotated portrait. My neck's non too supple, so tilting my head for extended periods is not really viable. :-) Any ideas on making ubuntu display 1080 normal landscape? It must be possible as using a gparted boot cd does it perfectly. Any help greatly appreciated. Cheers!

  Read the article

• Is it possible to have my desktop loaded before login?

  - by Dims

  I am connecting to the system with Putty (this is Windows SSH client) then running some service in interactive personal mode. For example this is a script to run freeswitch: dims@nebulla:~$ cat freeswitch.sh #!/bin/sh cd ~/bin/freeswitch/bin gnome-terminal -e ./freeswitch & I.e. it is installed in user directory. Also DISPLAY is set to :0 The problem is that I can't use this script until login once. Script responds with dims@nebulla:~$ ./freeswitch.sh dims@nebulla:~$ No protocol specified Failed to parse arguments: Cannot open display: After login, I can do "Switch user" and see login screen but script will be able to run since desktop exists. My question is: is it possible to "preload" my desktop, so that initial situation was as if I loogged in and the went to switch user?

  Read the article

• Why does Ubuntu 10.10 show blank screen during startup?

  - by user8372

  When I try to login to Ubuntu 10.10 I get a flickering screen for a second showing - Ubuntu 10.10 ............. and then I get a blank purple coloured screen[Ubuntu's theme colour] which doesn't progress any further Can anybody suggest a remedy to this problem? From whatever questions I searched in various Ubuntu Forums it seems like this problem is likely caused by a missing NVIDIA Display Driver[which is being used in my Sony Vaio Laptop] update in Ubuntu releases If that's the case then how can I update my NVIDIA Display Driver for Ubuntu 10.10 without being able to log into the Ubuntu 10.10?

  Read the article

• My laptop adapter has just faintly chirped like a cricket. Should I not plug it into my laptop again?

  - by Bloke

  The DC end that goes into the laptop was unplugged and the AC end was plugged into the mains (actually the plug sucks, so it could have been that it was...you know...just on the border. Getting and losing contact many times in a short amount of time if I moved the cable a bit) ...So one of these times that I just touched the cable, it did this chirping cricket sound and I unplugged it immediately. It did smell a bit weird, but I'm not sure if that's normal (due to heat or whatever).. So, should I be afraid of if? Can it kill my laptop if I try charging it? I only have around half an hour of battery left. Please help. Hope this is the right StackExchange site to ask. Thank you in advance

  Read the article

• net.tcp Listener Adapter and net.tcp Port Sharing Service not starting on reboot

  - by Peter K.

  I am using the net.tcp protocol for various web services. When I reboot my Windows 7 Ultimate (64-bit) macbook pro, the service never restarts automatically, even though that is how they are set: The only relevant events I can see are in the System Event Log: Error 6/9/2011 19:47 Service Control Manager 7001 None The Net.Tcp Listener Adapter service depends on the Net.Tcp Port Sharing Service service which failed to start because of the following error: The service did not respond to the start or control request in a timely fashion." Error 6/9/2011 19:47 Service Control Manager 7000 None The Net.Tcp Port Sharing Service service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion." Error 6/9/2011 19:47 Service Control Manager 7009 None A timeout was reached (30000 milliseconds) while waiting for the Net.Tcp Port Sharing Service service to connect. This post suggests that it's something else blocking the port (in the post it's SCCM 2007 R3 Client which I don't use). What else could be the problem? If it's something else blocking the port, how do I figure out what? When I manually start the services, they start correctly. Dependencies are: Net.Tcp Port Sharing Service Net.Tcp Listener Adapter Still no luck, but I think the problem might be that my network connection takes too long to come up. I put in a custom view of the event log, and found these items: The first in the series says: A timeout was reached (30000 milliseconds) while waiting for the Net.Tcp Port Sharing Service service to connect.

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >