Search Results

Search found 690 results on 28 pages for 'grub2'.

Page 20/28 | < Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >

• Ubuntu doesn't boot after upgrade

  - by Hugtrw

  I updated to 12.10 and the OS will not load. I used the boot repair cd, and the only thing that works is the monodeset option in the kernel and the graphics are terrible, mouse disappears and unity will not load. Ubuntu 12.04 ran great. On a clean install of 12.10 Ubuntu wont even load to install unless under using monodeset. I get left a terminal like screen with just a blinking bar. I'm using a HP Compaq NC6400 Laptop, Ubuntu 32-bit, 2gb ram.

  Read the article

• GRUB prompt at boot after boot-repair

  - by gabrie

  I tried installing Ubuntu 12.04 from the live CD. The install went fine but i had the next error while booting : Grub stage 1.5 error 2. So I used boot-repair as explained here (http://doc.ubuntu-fr.org/boot-repair). Still not working, i got this while booting : "GNU GRUB version 1.99-21ubuntu3 Minimal bash-like line editing is supported. Etc...". Nothing more... Here the report rom boot-repair : http://paste.ubuntu.com/1408117 Could anyone help me ?

  Read the article

• no windows 7 option after recent 12.10 install and boot repair

  - by user95240

  Earlier today i installed ubuntu 12.10 beta. Grub wasn't booting, but just going directly to my primary OS Windows 7. I assumed i had partitioned incorrectly, because partitioning isnt my strong suit. I used boot repair because it was well recomanded off a live usb. Afterwards, grub appeared, but i only had options for Ubuntu, Advanced Ubuntu Option, and my hidden windows 7 recovery partition. Please help me recover my access to windows partiton. See this link for Boot-Repair report: http://paste.ubuntu.com/1266467/ ps. ran Boot-Repair a second time - no change

  Read the article

• Stucked in the grub command prompt

  - by user903645

  I have a windows xp os, and I ve decided to give ubuntu a shot. I installed and It when rebooting it did boot by default windows. I red several forums and after entering those commands: sudo mkdir /mnt/ubuntu sudo mount /dev/sda2 /mnt/ubuntu sudo grub-install /dev/sda --root -directory=/mnt/ubuntu after rebooting the system showed me the command grub. And I cannot get anywhere. I don t have a windows cd to fix anything. so how can I launch windows from this command grub? Thanks... I am in a real mess.

  Read the article

• How to get BURG on 12.10 (Quantal Quetzal)

  - by Warpspace

  I've been using BURG for years to get rid of the eye sore that is the standard GRUB interface. When I upgraded to Quantal, the repository does not contain the updated information. I.e. after I add sudo add-apt-repository ppa:n-muench/burg sudo apt-get update I get the annoying response W: Failed to fetch http://ppa.launchpad.net/n-muench/burg/ubuntu/dists/quantal/main/binary-amd64/Packages 404 Not Found It's been like this for a month, contrary to various websites which say it works. Is BURG being maintained? Have they created a better alternative (such as integration with GRUB, like it should have been in the first place). How do I get a decent-looking bootloader?

  Read the article

• Windows 7 and Ubuntu Boot issue

  - by user115137

  I had the idea to dual boot Win 7 and Ubuntu and what I did was the following: Made a clean install of win 7 using all of my hard drive, next I used the Ubuntu live cd and gparted to partition my drive to be the following: /dev/sda1 ext4 20GB (Linux root) /dev/sda2 ntfs 100GB(Win7) /dev/sda3 ext4 350GB(Home) /dev/sda4 extended 4GB(swap) The thing is, when installing ubuntu I deleted the partition win 7 creates for its boot sector and recovery and then resized the drive to look like what I mentioned, and Ubuntu installed GRUB to the MBR. When GRUB boots I can see Ubuntu but not Windows, how can I chainload it? Or should I fix the windows mbr with the windows 7 installation disk and try to set the dual boot from there? I don't really care which one of the 2 bootloaders I end up using, I just want the dual boot to work out. Thanks

  Read the article

• Grub rescue doesn't allow me to boot from LIVE CD/USB

  - by Thameem

  I used to have Windows Vista & Ubuntu 12.04 on dual boot. Accidentally, I deleted the Linux partition and landed on Grub rescue on the next boot. The tricky thing for me here is I have been trying to boot through LIVE CD/USB of the ubunutu version, other linux versions but in vain. What happens is, it appears as if it reads the CD/DVD drive or the USB flashes for a while when trying to boot through LIVE versions but the Grub rescue appears after a while. The only option I could think here is to remove the hard disk and connect to the other laptop I have through USB and reinstall a fresh OS. Please suggest me a way to boot through the DVD/USB again. My laptop is Sony VAIO CR32 series.Thanks.

  Read the article

• Grub not loading after Windows 8 Install

  - by RazorXsr

  My system was configured to dual boot Ubuntu 12.04.1 LTS and Windows 7. Today I got my hands on the MSDN release of Windows 8 and I installed it over my Windows 7. Now the computer just boots to Windows 8 directly without loading the GRUB screen. So I followed the steps as suggested in: https://help.ubuntu.com/community/RecoveringUbuntuAfterInstallingWindows. Running this command: ls -l /dev/disk/by-label/ gives the following output: total 0 lrwxrwxrwx 1 root root 10 Sep 11 07:51 Entertainment -> ../../sda2 lrwxrwxrwx 1 root root 10 Sep 11 02:45 PENDRIVE -> ../../sdb1 Also fdisk -l command gives this as the output: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x1246aa23 Device Boot Start End Blocks Id System /dev/sda1 * 2048 319582199 159790076 7 HPFS/NTFS/exFAT /dev/sda2 319582208 602906623 141662208 7 HPFS/NTFS/exFAT /dev/sda3 602908672 625135615 11113472 83 Linux Disk /dev/sdb: 1939 MB, 1939865600 bytes 64 heads, 63 sectors/track, 939 cylinders, total 3788800 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xc3072e18 Device Boot Start End Blocks Id System /dev/sdb1 * 2248 3788799 1893276 c W95 FAT32 (LBA) So I assume that I have to run this: sudo grub-install /dev/sda3 to get GRUB up and running. But I am getting this error: /usr/sbin/grub-probe: error: cannot find a device for /boot/grub (is /dev mounted?). Can anyone please guide me in the right direction? The current Ubuntu installation is far too customized to my needs to lose it to a boot manager issue! Any help is much appreciated!

  Read the article

• Can't boot into 12.04, grub menu won't show

  - by Marcus

  I downloaded the Ubuntu 12.04 64bit and installed it on a 115GB partition next to a 15GB swap alongside Windows 7. I'm using a asus g73s. I have 2 drives: one with only Windows (500GB) and another with a partition for (250GB) Windows and (115GBb) the Ubuntu and (15GB) swap partitions. But after the installation, I can't find out how to run Ubuntu. It just run windows. I read that it should show a grub menu. I tried: Holding both Shift keys at boot up. Running the Ubuntu Live CD and edit the grub file. Also pressing the Esc and some function button during boot. Nothing seems to work. I solved my problem. I pressed Esc during boot and a boot menu opened and there i choosed option: P2 and than the grub menu showed.

  Read the article

• No Windows Option on Boot

  - by Okoning

  I've installed Ubuntu alongside Windows but at first didn't have a boot option menu. So, I installed bootrepair and ran it. This succeeded in granting me a GRUB boot option menu, but Windows isn't on it. Here is the bootrepair report: http://paste.ubuntu.com/8098527 Can anyone tell me what might be wrong? EDIT: I ran sudo fdisk -l and this is the output: Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00023fe0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 960096255 480047104 83 Linux /dev/sda2 960098302 976771071 8336385 5 Extended /dev/sda5 960098304 976771071 8336384 82 Linux swap / Solaris Disk /dev/sdb: 32.0 GB, 32015679488 bytes 255 heads, 63 sectors/track, 3892 cylinders, total 62530624 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/sdb1 * 32 62530623 31265296 c W95 FAT32 (LBA)

  Read the article

• External hdd boot entries added to GRUB after upgrade to 13.10

  - by Jason

  Long story short, I was using my laptop's internal HDD as an external one on my desktop, and I forgot to remove it when I was upgrading to 13.10. Now GRUB on my desktop has added entries for the Windows and Ubuntu partitions that exist on the laptop's HDD, but I don't want them to be there. Can I safely remove them ? My GRUB table looks like this if I recall correctly: Ubuntu Advanced Options (or something like this) Memtest Another Memtest Entry Windows 7 (loader) on /dev/sda1 Windows 7 (loader) on /dev/sdb1 Ubuntu 13.04 Advanced Options for Ubuntu 13.04 Where Windows 7 (loader) on /dev/sdb1 Ubuntu 13.04 Advanced Options for Ubuntu 13.04 are the entries from the external/laptop's HDD.

  Read the article

• Ubuntu in USB.. Boot from fixed HDD?

  - by Z9iT

  I am having Ubuntu 12.04 minimal installed on my USB pen-drive; which I use on several systems as portable OS. I was thinking to edit the boot parameters so that before the main Ubuntu OS is loaded, it shows an option to Boot from Hard Drive for 5 seconds, and then boots to Ubuntu. This way i'll be able to have an option to boot to the OS installed on the Hard-Drive, without removing or unplugging my ubuntu USB stick. How do I edit the boot parameters to achieve this?

  Read the article

• Ubuntu 11.10 not showing up in GRUB bootloader after update and restart :(

  - by beginer

  I was using ubuntu 11.10 with gnome-shell. I installed various useful softwares and ran system update using update manager which ran smoothly and asked me to restart my comp at the end. I restarted it to find that Ubuntu entries were missing from the GRUB bootloader and only memory test and windows are showing up. I took a lot of pain in installing various important softwares and cannot afford a re-installation. Tried to boot from the live cd and installed boot-repair and after running it .. it wasnt working properly .. it was just showing that it was "scanning systems" for more than an hour. Kindly help. Thank you ..

  Read the article

• No boot option after installing Ubuntu 12.04 LTS on Acer Aspire 4736z with Live CD

  - by utamaku

  I am facing a problem. After installing Ubuntu 12.04 LTS using Live CD, at the reboot there is no boot option to choose the OS. I directly get logged into my Windows 7. Before that i was having an issue with the 'nomodeset' if not mistaken .After ticking [x] on the nomodeset, i can install my Ubuntu, but got stucked again at choosing the partition option. So i did 2 partitions for Ubuntu, 1 partition as ext3 for / and the other 1 for swap. Which enabled to proceed until the finished installation dialogue, and after that system wants to reboot .It takes some time and gets stuck at the screen doing nothing, doesn't reboot at all. I did forced shutdown then rebooted again which directly logs me in windows 7 without boot option. In win7 the partitions for Ubuntu is gone. I tried the boot-repair thing and it doesn't help .It just shows up the _ Blank Cursor (terminal thing i guess). I typed boot repair but still the same result. I am using Acer Aspire 4736z. Please somebody help me with this issue.

  Read the article

• Can't boot from Ubuntu 12.04 live USB

  - by 8vius

  I'm trying to recover GRUB after installing Windows 7. I installed Ubuntu 12.04 first, then installed Windows 7 so I lost the GRUB at startup. Made a USB stick with Ubuntu to boot from, I get the menu tell it to start and it takes off but then gets stuck. The last line showing on the screen is: ata10: PATA max UDMA/100 cmd 0xc800 ctl 0xc480 irq 17 or this: [4.793048] scsi9 : pata_jmicron Then it just gets stuck there and the screen flashes from time to time.

  Read the article

• Installing Ubuntu in EFI mode Cant go beyond GRUB Menu

  - by Vulcan

  I created a LiveUSB of Ubuntu 12.04.3 LTS using Pendrive Linux. -Created a separate 30GB partition using Windows 8 Disk Management -Disabled Secure Boot (Didn't find an option to disable EFI boot) -Disabled Fast Startup The laptop starts the GRUB menu shows up but it doesn't go beyond that no matter what option i choose. After choosing any option the screen goes blank but the power is still on i can see the power light. My laptop is HP-n012tx processor- Intel i5 4200U Video Card- 2GBnVidia 740M The GRUB menu i see http://i.stack.imgur.com/buEAn.png

  Read the article

• System doesn't show option to select operating system during startup!

  - by samsher

  i am new at linux and ubuntu, today i installed ubuntu 12.04 but during installation some problem happened, i don't remember what was that exactly (but can tell you that it was related to boot), so i reinstalled ubuntu (using usb stick both time) and ubuntu installation finished successfully, Now problem is that when I start my computer then system is directly selecting ubuntu as my operating system, i have installed it along with windows 7 in option during installation, so it should give me option to select which operating system i want to use. I don't know what may be the problem. Also, I want to know where ubuntu is installed (which directory)? i just selected default setting during installation as i am noob in these things.

  Read the article

• Question regarding drives

  - by user205934

  I am a new Ubuntu user who has spent a lot of time on Windows. A very common practice for me on Windows was making two drives, C: and D: , storing installs/files in C:, and I used D: for backup or if I downloaded something that I wanted to save, I saved in D: When installing Ubuntu, it asked me if I wanted to replace Windows 7. I thought it would install Ubuntu on C: but instead it used the whole partition, nevertheless I recovered my backup using testdisk. What I wanted to do was to create a similar backup drive on Linux too. My current partition table: sda 8:0 0 232.9G 0 disk +-sda1 8:1 0 230.9G 0 part / +-sda2 8:2 0 1K 0 part +-sda5 8:5 0 2G 0 part [SWAP] sr0 11:0 1 1024M 0 rom So should I use Gparted to create another sda3 and store my important data on that? Also my current sda2 is listed as an extended partition, should I delete it? It's a very small partition, just 1K.

  Read the article

• Ubuntu 11.10 is on external HDD, how to boot (using grub4dos), and which initrd and vmlinuz to use?

  - by user198003

  I installed Ubuntu 11.10 on external HDD. How can I boot it? I used grub4dos before, and it worked with Fedora distributions. Problem I have now is that I don't know which initrd and vmlinuz files to use. Tried with one I have in /boot directory, but booting did not worked... Can you give me some ideas what to try, do i have to use different initrd and vmlinuz, or I can solve this with other solutions. Also, just to mention that boot goes to BusyBox v1.18.4 command prompt. Thank you in advance!

  Read the article

• Help understanding my hard drive / partitioning situation... Pictures Included! :)

  - by xopenex

  So I have installed windows 7, and two different distros of linux... I have read and tried to understand things like "spanned" "extended" "primary" "swap" "dev/dev2/" "GRUB" "Windows Boot Loader/Manager" etc.... I have a very very limited understanding of all of it! :) I am trying to figure out how to get all OS boot options on one Boot manager (I'm thinking it will be GRUB), because at this point when i turn on my computer, I basically get two booting options (excluding the memtest options etc)... One options is to boot one of my Linux Distros and the second option is to boot my Windows 7. When i go with the first option, Linux boots up... when i go with the second Windows 7 option, I get the "windows boot manager screen" and I can choose Windows 7 or my other installation of Linux (Ubuntu)... In addition, I did not have swap partition from my first installation of Linux, I created it during the installation of my second distro... This is a lot of info for me, but I'm guessing that you linux Gurus, pretty much understand what is going on! Hope my question makes sense.. i will try and simplify... Can i get all 3 OS's optioned to boot from one GRUB? Can i get both Linux distros to use one swap file (I have seen this possible in other threads, but because of how my disk is partitioned, i dont know if i can do this) I hope that i dont have to start all over installing one after the other. Ive got some pics that may help understand my hard drive situation! Thanks guys! :) EDIT... i had some pics, but im a new member.. so cant post them... :( here is a description of the pics... incase i can email them or post later. [grub][3] First Screen I come to after turning on computer... "Ubuntu with linux 3.2.6" (highlighted) fires up Linux perfectly... other choice at bottom of list "Windows 7 (loader) (on dev/sda1)... brings me to the next picture below.. windows boot manager [win boot mngr][6] both options here load the os selected [Disk Manager Windows][1] picture of my hard drive situation through windows disk manager utility [gparted][2] picture of my hard drive situation through "gparted" [mycomp][4] picture of my hard drive situation through "my computer" [paragon][5] one last pic of my hard drive situation through the eyes of "paragon"

  Read the article

• Preinstalled Windows 8 Not showing up on Grub 2, Ubuntu 12.10

  - by ise

  http://paste.ubuntu.com/1522276/ Hi There, I've scoured everywhere & I'm still all very confused. Since I'm a total noob, I don't really want to touch too many files... I have an Acer M5 with Windows 8 preinstalled. I installed Ubuntu 12.10 in secure boot, but Grub does not recognize my Windows 8. I tried boot-repair, to no avail. Here are my specs: http://paste.ubuntu.com/1522276/ Please help?

  Read the article

• Can't boot into ubuntu 12.04, grub menu wont show

  - by Marcus

  Today i downloaded the ubunto 12.04 64bit and installed it on a 115gb partition next to a 15 gb swap alongside windows 7. (I have 2 drives. One with only windows (500gb) and another with a partition for (250gb) windows and (115gb) the ubunto and (15gb) swap partitions.) But after the installation i can't find out how to run ubuntu. It just run windows. I read that it should show a grub menu. i tried: Holding both shift keys at boot up. Running the cd-ubundu and edit the grub file. Also pressing the esc and some funtion button during boot. Nothing seems to work.

  Read the article

• Ubuntu 12.04 edit grub

  - by J. R. Crocker

  I just install Ubuntu 12.04. I want to change the boot order of grub. Previous versions of grub.cfg I was able to change the permissions and the do a gedit. After reloading 12.04, I was able to change permissions for grub.cfg, but gedit will not let me save it. I am a little irritated that Ubuntu is suppose to be open source. However someone has chosen to lock one out of a file. I do realize that some people have no business doing a edit on grub. I am a long time user of Unix and Linix.

  Read the article

• No video signal during: grub, for a moment when I log out and during shut down

  - by hushs

  When I should see the GRUB menu I only see my monitor writes out this: "No optimum mode. Recommended mode: 1600*1200". If i wait for a short while, ubuntu starts to boot and it reaches the desktop. So I guess there is no video signal during that time, there's the grub menu but i cant see it and after the wait time everything is fine. I have the same problem when I log out for a short moment, before the log in screen is reached. and this also happens when i shut down ubuntu. The VGA is an onboard NVIDIA GeForce 7025. Kinda strange problem, I have no idea how to solve this. Please help :)

  Read the article

• How can I fix a very broken Ubuntu installation without losing data?

  - by jredkai

  Okay guys, I was installing a program (I do not remember the name). When I did sudo apt-get update I was given missing dependencies. It told me to sudo apt-get install -f which deleted just about every dependency needed for Ubuntu, now I cannot log in or anything, now in GRUB it actually says Debian instead of Ubuntu. I have tons of important data in that partition. Can I some how use the live cd to fix this problem??? I mean like re-install without losing data. Any help is greatly appreciated!!!

  Read the article

< Previous Page | 16 17 18 19 20 21 22 23 24 25 26 27  | Next Page >