Search Results

Search found 7593 results on 304 pages for 'dev e loper'.

Page 200/304 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

  • Gentoo on Mac Mini - can't get framebuffer to work

    - by user42055
    I have the latest Gentoo on an intel mac mini with 945G graphics. I'm trying to start X (with no config) but it complains that /dev/fb0 doesn't exist. I've tried adding the following options to the kernel boot params: video=intelfb:mode=800x600-32@60,accel,hwcursor vga=761 Because I read that the fb might not be enabled unless you set a vga= option. Unfortunately the kernel doesn't recognise that option. If I changed it to vga=ask it presents me a list of about 6 text modes no greater than 80x60. In the kernel I have agpgart, drm (using i830 module) and vga text console compiled in. What am I not doing right ?

    Read the article

  • Gentoo on Mac Mini - can't get framebuffer to work

    - by user42055
    I have the last Gentoo on an intel mac mini with 945G graphics. I'm trying to start X (with no config) but it complains that /dev/fb0 doesn't exist. I've tried adding the following options to the kernel boot params: video=intelfb:mode=800x600-32@60,accel,hwcursor vga=761 Because I read that the fb might not be enabled unless you set a vga= option. Unfortunately the kernel doesn't recognise that option. If I changed it to vga=ask it presents me a list of about 6 text modes no greater than 80x60. In the kernel I have agpgart, drm (using i830 module) and vga text console compiled in. What am I not doing right ?

    Read the article

  • port redirection on solaris 11

    - by mo3lyana
    I'm trying port forwarding on solaris 11. I have a mechine behind a server that use solaris 11. I try to access that mechine from the external port, and forwarded by solaris 11 mechine to that machine using the ip filter. I give ipnat.conf configuration like this: rdr net0 0.0.0.0/0 port 1428 -> 10.1.18.178 port 22 but the response appeared when I tried to remote is connection time out, but if I redirect to a solaris 11 machine itself, the configuration is running well. I've enabled IP forwarding on the system root@solaris11:/etc/ipf# ndd -get /dev/ip ip_forwarding 1 root@solaris11:/etc/ipf# routeadm Configuration Current Current Option Configuration System State --------------------------------------------------------------- IPv4 routing enabled enabled IPv6 routing disabled disabled IPv4 forwarding enabled enabled IPv6 forwarding disabled disabled root@solaris11:/etc/ipf# ipadm show-prop PROTO PROPERTY PERM CURRENT PERSISTENT DEFAULT POSSIBLE ipv4 forwarding rw on on off on,off is there any configuration that I missed?

    Read the article

  • How to repair unbootable Fedora install

    - by Cerin
    How do you repair/reinstall Fedora without deleting any existing partitions or data? I was attempting to upgrade some old Fedora 13 servers to 17, following the instructions in the wiki. After the 14-15 upgrade, rebooting resulted in the output: Dropping to debug shell. sh: can't access tty; job control turned off dracut:/# Running dmesg also shows: dracut Warning: No root device "block:/dev/mapper/VolGroup-lv_root" found Googling shows this error is typically related to some weird RAID issues, but my server is a virtual machine not using any RAID. Using a rescue CD, I can chroot /mnt/sysimage, and all packages and data still seems to be there. How do I make the system bootable again?

    Read the article

  • Better Performance with Laptop i5+SSD or i7+HDD [closed]

    - by Cas Sakal
    Possible Duplicates: i5 vs. i7 processor dev laptop Developer Notebook i5 or i7 I could not decide on which configuration below gives better performance for developers on a notebook(running VS.NET, SQL Server, no gaming); (A) i5 540M + SSD (Intel) or (B) i7 720M + 7200 RPM HDD (Western Digital) Since these two configurations(A, B) costs nearly same $ for me, I would like to buy the fastest one for my job environment. Please do not comment just buy this or that, if you can give an inference about your choice I would be appreciated. Thank you, cas

    Read the article

  • Cold Fusion 8 and 9 on IIS 6

    - by David Mesh
    I have a client, who against my better judgement has insisted on doing the following. They have a single IIS 6 on Win 2003 Server Enterprise. It currently runs ColdFusion 8. They want me to install ColdFusion 9 on the server without changing any of the existing sites so that they can develop in CF 9 and upgrade other sites in the future. Yes, I have begged them to use a Dev server, or run on apache on the same box. Can this even be done? Many thanks in advance! DM

    Read the article

  • fstab line for auto mount drive that all users can read/write

    - by evilblender
    I have installed a cable that connects from the CPU's SATA motherboard connection to a removable drives' ESATA connection. I would like to be able to swap drives on the ESATA connection and have all users be able to read and write to these drives. I have created the directory /archive/ where I would like the drive(s) to mount. The drives are all formatted Fat 32 - but in the future I may use HFS for formatting. When I used the command (as root): mount /dev/sdc1 /archive the drive was mounted (but read only) What can I use in my /etc/fstab file that will allow drives to be mounted and unmounted by all users on the system? (both reading and writing) Also, will I be able to mount and unmount these drives without shutting down? or will I need to reboot every time I want to change drives? Thank you. Jeff

    Read the article

  • Moving a Drupal between linux servers, best practice to avoid file-ownership problems

    - by zero
    I want to port over a Drupal commons 6x24 from a local LAMP-stack to a production webserver. Both systems run OpenSuse Linux. How do I do this, what are the most important steps. How should I handle file-ownership. It's important for me to have to have full control of the file ownership. If I use the wwwrun account, I frequently run into problems, due to a very strict webserver-admin. See for example the long history of looking for fixes and solutions see this thread and even more interesting see this very long and impressive thread here. All troubles I run into have to do with file-owernship and permissions. This is my current setup; Note: This was just a quick hacked installation - quick and dirty. Well my interest is after the general options i have in the port of a drupal from linux to linux linux-vi17:/srv/www/htdocs/com624 # ls -l insgesamt 224 -rwxrwxrwx 1 root www 45285 19. Jan 00:54 CHANGELOG.txt -rwxrwxrwx 1 root www 925 19. Jan 00:54 COPYRIGHT.txt -rwxrwxrwx 1 root www 206 19. Jan 00:54 cron.php drwxrwxrwx 2 root www 4096 19. Jan 00:54 includes -rwxrwxrwx 1 root www 923 19. Jan 00:54 index.php -rwxrwxrwx 1 root www 1244 19. Jan 00:54 INSTALL.mysql.txt -rwxrwxrwx 1 root www 1011 19. Jan 00:54 INSTALL.pgsql.txt -rwxrwxrwx 1 root www 47073 19. Jan 00:54 install.php -rwxrwxrwx 1 root www 15572 19. Jan 00:54 INSTALL.txt -rwxrwxrwx 1 root www 14940 19. Jan 00:54 LICENSE.txt -rwxrwxrwx 1 root www 1858 19. Jan 00:54 MAINTAINERS.txt drwxrwxrwx 3 root www 4096 19. Jan 00:54 misc drwxrwxrwx 35 root www 4096 19. Jan 00:54 modules drwxrwxrwx 4 root www 4096 19. Jan 00:54 profiles -rwxrwxrwx 1 root www 1470 19. Jan 00:54 robots.txt drwxrwxrwx 2 root www 4096 19. Jan 00:54 scripts drwxrwxrwx 4 root www 4096 19. Jan 00:54 sites drwxrwxrwx 7 root www 4096 19. Jan 00:54 themes -rwxrwxrwx 1 root www 26250 19. Jan 00:54 update.php -rwxrwxrwx 1 root www 4864 19. Jan 00:54 UPGRADE.txt -rwxrwxrwx 1 root www 294 19. Jan 00:54 xmlrpc.php linux-vi17:/srv/www/htdocs/com624 # thx to BetaRides answer here a quick overview on the drush functionality with rsync http://drush.ws/ core-rsync Rsync the Drupal tree to/from another server using ssh. Examples: drush rsync @dev @stage Rsync Drupal root from dev to stage (one of which must be local). drush rsync ./ @stage:%files/img Rsync all files in the current directory to the 'img' directory in the file storage folder on stage. Arguments: source May be rsync path or site alias. See rsync documentation and example.aliases.drushrc.php. destination May be rsync path or site alias. See rsync documentation and example.aliases.drushrc.php. Options: --mode The unary flags to pass to rsync; --mode=rultz implies rsync -rultz. Default is -az. --RSYNC-FLAG Most rsync flags passed to drush sync will be passed on to rsync. See rsync documentation. --exclude-conf Excludes settings.php from being rsynced. Default. --include-conf Allow settings.php to be rsynced --exclude-files Exclude the files directory. --exclude-sites Exclude all directories in "sites/" except for "sites/all". --exclude-other-sites Exclude all directories in "sites/" except for "sites/all" and the site directory for the site being synced. Note: if the site directory is different between the source and destination, use --exclude-sites followed by "drush rsync @from:%site @to:%site" --exclude-paths List of paths to exclude, seperated by : (Unix-based systems) or ; (Windows). --include-paths List of paths to include, seperated by : (Unix-based systems) or ; (Windows). Topics: docs-aliases Site aliases overview with examples Aliases: rsync

    Read the article

  • Need help connecting to SRW2024 Linksys Switch from CentOS 5.4

    - by sxanness
    I am configured a Linksys SRW2024, I accidently changed the management VLAN before changing the VLAN configuration thus I can no longer access it with the net. The only way I have read to get into it now is via a console cable, my laptop with me is a MacBook Pro with no Serial port connection, apart from driving around a town that I am unfamilar with to find an adapter I thought I would try on a Linux box. I have a CentOS 5.4 server here (PowerEdge R300) that I am trying to use to talk to the switch. I tried minicom first but I do not see the console. Another site suggested the screen command. I tried "screen /dev/ttyS0 38400" but all I get is blinking curser, I do not see the configuration. I don't know if anyone here as any tips but I hope someone does. Thank You,

    Read the article

  • rsync - How to exclude one .htaccess but not all of them

    - by Cory Gagliardi
    I have an rsync command for copying my files from dev to production. I don't want to copy the .htaccess file that's in the root of the HTML directory but, I do want to copy the few .htaccess files that are in its sub directories. I'm using the argument --exclude .htaccess which is stopping all of the files from getting copied. The other arguments I'm including are -a --recursive --times --perms. Is it possible to configure rsync to do this? Edit: Here is my full command: rsync -a --recursive --times --perms \ --exclude prop_images --exclude tracking --exclude vtours \ --exclude .htaccess --exclude .htaccess_backup --exclude "*~" \ /home/user/dev_html/* /home/user/public_html/

    Read the article

  • What are working xorg.conf settings for using a Matrox TripleHead2Go @ 5040x1050?

    - by Brendan Abel
    I'm trying to configure xorg.conf to correctly set the resolution of my screens. I'm using a matrox triplehead, so the monitor is a single 5040x1050 screen. Unfortunately, it's being incorrectly set to 3840x1024. Here is my xorg.conf: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Matrox" HorizSync 31.5 - 80.0 VertRefresh 57.0 - 75.0 #Option "DPMS" Modeline "5040x1050@60" 451.27 5040 5072 6784 6816 1050 1071 1081 1103 #Modeline "5040x1050@59" 441.28 5040 5072 6744 6776 1050 1071 1081 1103 #Modeline "5040x1050@57" 421.62 5040 5072 6672 6704 1050 1071 1081 1103 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce 9800 GTX+" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "5040x1050" SubSection "Display" Depth 24 EndSubSection EndSection

    Read the article

  • How can I disable logging in Tomcat 7?

    - by WilliamMayor
    I have a Tomcat 7 server running in a VM that has very little disk space (20G). Over the course of a few days Tomcat will fill the space with logging info (usually about 15G before it runs out). I've tried turning down the log level (from INFO to SEVERE) in the logging.properties file, I've also tried sending the log info to /dev/null. It doesn't seem to work as I still get a full log directory after no time at all. Can I put a file size limit on the log files? Is something overriding the properties I'm setting? Where can I find this information? My Google Fu just returns information about logging from within an application using JULI.

    Read the article

  • Ubuntu server hangs on reboot "could not stat resume device file"

    - by matnagel
    Instead of booting into the running system this machine stops and on the terminal I can see a message: could not stat resume device file /dev/sdb5 When I attach a keyboard and press enter the boot continues and the machine comes up like normal. But it's essential that this machine comes up under most circumstancs alone. There never was something like a "resume" on this machine. I tried several times to reboot, but this does not happen on all boots, I can not find a pattern here. There is a software raid running on the box. This is the syslog during boot: http://privatepaste.com/ff0fd0a51c/sdabfjahfgasjkgfu4gfsdzjcgfafasdjfhgasdcjfgauzfgafasgdufzg How can I get rid of this boot failure? We do not need resumes and best would be something that works here and now.

    Read the article

  • How to resize the disk of a Fedora guest VM in VMWare ESXi

    - by Cerin
    How do I resize (specifically increase) the disk size of a Fedora guest VM running under VMWare ESXi 4.1? I have a Fedora 16 VM with an ext4 formatted disk, and I've increased its disk size using the vSphere client from 50GB to about 250GB. I rebooted the guest, and it correctly shows this size using fdisk -l /dev/sda. However, df -H still shows the old size. I've found a few KB articles explaining how to resize partitions for some flavors of Linux, but nothing for Fedora with ext4. That article seems to imply I have to create a completely new partition, and that I can't simply expand the existing partition. Using Gparted, it also prevents me from simply resizing the existing partition. Is this impossible to do under Linux?

    Read the article

  • phpbb behind a reverse proxy

    - by asciitaxi
    Hi, i've got a django app running on apache behind an nginx reverse proxy. Nginx takes requests on port 80 and forwards them to apache on 127.0.0.1:81. This works fine. Now I want to run phpbb on apache under /forums. My problem is that when phpbb does a redirect, it seems to redirect to the internal apache port, rather than port 80. So, for instance when I first go to http://my-dev-server/forums to configure php bb, it immediately redirects to http://127.0.0.1:81/forums/install/index.php. Is there something I need to do in nginx/apache/phpbb config to get it to redirect to the external port? Thanks very much!

    Read the article

  • OpenVPN Configuration - Windows 7 client & debian server

    - by Guillaume
    I recently formatted my Windows 7 computer and lost my client's config files for OpenVPN. I recovered the certificates and default config that were left on the server but I haven't managed to make the whole thing work again. I assume the server's config and routing table are OK because it was working before (although quite some time ago). Would any of you experts be able to help? server.conf # Serveur TCP/666 mode server proto udp port 666 dev tun # Cles et certificats ca ca.crt cert server.crt key server.key dh dh1024.pem tls-auth ta.key 0 cipher AES-256-CBC # Reseau server 10.8.0.0 255.255.255.0 #push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" push "redirect-gateway def1" keepalive 10 120 # Securite user nobody group nogroup chroot /etc/openvpn/jail persist-key persist-tun comp-lzo # Log verb 3 mute 20 status openvpn-status.log log-append /var/log/openvpn.log client.conf # Client client dev tun proto udp remote *my server's ip address*:666 cipher AES-256-CBC # Cles ca ca.crt cert client1.crt key client1.key tls-auth ta.key 1 # Securite nobind persist-key persist-tun comp-lzo verb 3 Routing table on debian server when OpenVPN server is running: Destination Gateway Genmask Indic Metric Ref Use Iface 10.8.0.2 * 255.255.255.255 UH 0 0 0 tun0 10.8.0.0 10.8.0.2 255.255.255.0 UG 0 0 0 tun0 my server's ip * 255.255.255.0 U 0 0 0 eth0 default 72815.trg.dedic 0.0.0.0 UG 0 0 0 eth0 Routing table on Windows 7 client (OpenVPN not working) =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: [...] =========================================================================== Persistent Routes: None And when the link is established between my client and the server: The server's routing table stays the same. The client's becomes: =========================================================================== Interface List 19...00 f0 8a 1b 6e 5c ......TAP-Win32 Adapter V9 12...90 2e 34 33 84 7b ......Atheros AR8151 PCI-E Gigabit Ethernet Controller ( NDIS 6.20) 1...........................Software Loopback Interface 1 12...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.11 20 0.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 10.8.0.1 255.255.255.255 10.8.0.5 10.8.0.6 30 10.8.0.4 255.255.255.252 On-link 10.8.0.6 286 10.8.0.6 255.255.255.255 On-link 10.8.0.6 286 10.8.0.7 255.255.255.255 On-link 10.8.0.6 286 my server's ip 255.255.255.255 192.168.1.1 192.168.1.11 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 128.0.0.0 128.0.0.0 10.8.0.5 10.8.0.6 30 192.168.1.0 255.255.255.0 On-link 192.168.1.11 276 192.168.1.11 255.255.255.255 On-link 192.168.1.11 276 192.168.1.255 255.255.255.255 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.11 276 224.0.0.0 240.0.0.0 On-link 10.8.0.6 286 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.11 276 255.255.255.255 255.255.255.255 On-link 10.8.0.6 286 =========================================================================== Persistent Routes: None What's working: Server and client do connect to each other, SSL certificates are OK. The client gets an IP (10.8.0.6) from the server OpenVPN client is started as an administrator. But: I cannot ping the other one on either side. 'Gateway' value is empty on client's side (in the adapter's "status" window). Client has got no internet access when the link is up. Ideal configuration: I only want the client to be able to use the server's Internet access and access its resources (MySQL server in particular). I do not need or want the server to access the client's local network. The client needs to be able to access it's local network, although all Internet traffic should be redirected to the VPN link. I spent a considerable amount of time on this but it's still not working, any help would be much appreciated. Thanks :)

    Read the article

  • Mount encrypted hfs in ubuntu

    - by pagid
    I try to mount an encrypted hfs+ partition in ubuntu. An older post described quite good how to do it, but lacks the information how to use encrypted partitions. What I found so far is: # install required packages sudo apt-get install hfsprogs hfsutils hfsplus loop-aes-utils # try to mount it mount -t hfsplus -o encryption=aes-256 /dev/xyz /mount/xyz But once I run this I get the following error: Error: Password must be at least 20 characters. So I tried to type it in twice, but that results in this: ioctl: LOOP_SET_STATUS: Invalid argument, requested cipher or key (256 bits) not supported by kernel Any suggestions? Thx Edit: One thing I'm not sure about is whether I use the right password. My assumption is that it is my default one for these situations. But I'm not sure whether Max OSX choose another password (internally) for that.

    Read the article

  • Arch Linux shows a blinking cursor instead of a booting installer

    - by fakedrake
    Arch Linux shows a blinking cursor instead of a booting installer. I ran sudo dd if=archlinux-2010.05-core-i686.iso of=/dev/sdb1 and checked the MD5 sums. I tried to boot it on two different PCs and got the same result: instead of booting GRUB — or anything useful, for that matter — it just showed a blinking cursor at the top left corner of the screen. The machines became unresponsive to any kind of input, the flash drive LED didn't seem to blink or shiver at all and there seemed to be no other activity whatsoever. I tried using another flash drive, but the machine completely ignored it, booting Windows "normally."

    Read the article

  • Subversion for web designer: repository on a network share and ftp to the live server?

    - by ceatus
    My configuration: htdocs on a windows network share (z:) web developers check out with dreamweaver modify and check in back to the drive z LAMP running on a Ubuntu server virtualized on Hyper-V with apache that point on the z drive for dev in order to test the websites Upload by FTP on the live server Now: I need multiple access to the repository, keep them on a network shares and we manage about 200 websites. All the web developers, administrators and IT need to access to the share. I found out that creating a svn server is the best way for me, so I created it on a Ubuntu Server which is virtualized on Hyper-V. Right now I have the repos local on the Ubuntu Server but I'd like them on my network drive and I'd like to have a post-commit, if possible, in order to ftp directly on my live server. Do you guys think that a WebDav solution would be better? Thanks in advance Angelo

    Read the article

  • recommended way to collect email notifications from crond in Arch Linux

    - by nponeccop
    Arch Linux doesn't have sendmail installed by default. So I get the following messages in my syslog: Sep 15 13:16:01 zorro crond[18497]: mailing cron output for user collectors sh cronjob.sh Sep 15 13:16:01 zorro crond[18497]: unable to exec /usr/sbin/sendmail: cron output for user collectors sh cronjob.sh to /dev/null What is the recommended way to fix this default behaviour so actual messages are sent? heirloom-mailx is installed and capable of sending email messages using SMTP. Is it possible for crond to use mailx to send notifications? Is there any drop-in replacement for sendmail that sends using mailx? Sendmail is not even in the repositories.

    Read the article

  • SQL Server backup/restore error: The Media Family on Device is Incorrectly Formed.

    - by Chris
    Basically, I'm having this issue: http://www.sqlcoffee.com/Troubleshooting047.htm What I'm doing is running a script I found online (http://pastebin.com/3n0ZfybL) to do a full backup, then rar'ing up the file and moving it to my computer. The CRC of the backup file inside the rar is correct on both computers, so there is no problem with data being corrupted when I transfer it. But then I go and try to restore the database on my dev computer here and I get the errors "sql server cannot process this media family" ... "msg 3013". Why is this happening? I'd test out the backup on the server I'm getting it from, but it's a production server.

    Read the article

  • Best memory-efficient web browser for Ubuntu?

    - by Steve K
    I've installed Ubuntu 10.10 on an old laptop with only 756 MB of RAM, Pentium M 1.6 processor. I'm using Google Chrome 11.0 (dev channel) for web browsing, and it appears to be using up most of my memory and processor time. Does anyone know of a better browser than Chrome on Ubuntu, for an older computer like mine? I'm new to Ubuntu, so there may also be tweaks I can make to my existing system to have it perform better. But right now it's pretty slow when I've got ~5-10 tabs open. Related question: memory-efficient web-browser

    Read the article

  • How to allow an internal server accept remote connections not through RD Gateway

    - by Matt Ahrens
    So, I help administrate a collection of servers running various windows server environments. We have a RD Gateway server, properly configured, to gatekeep for us. It does not have the other servers listed in it's server farm category, though. I just added a refurbished server for a non-profit development environment that is sharing the rack space and port. I would like this server to be accessible via remote connection, but not require RD gateway certification (I cannot add the users for this development server to our gateway since they do not work for the organization hosting the rack.) Is there any way for me to add this dev. server as an exception to which servers should require RD Gateway clearance, or otherwise let users bypass RD gateway credentials for this one machine? Thanks, and let me know if I am misinformed on how RD gateway works or anything. I am still learning.

    Read the article

  • Password for iis after installing

    - by zapping
    After installing IIS on my dev system, window xp professional, its asking for username and password while trying to access http://localhost. Can you please help me out. Tried googling and tried may things but could not resolve the issue. Anonymous access is enabled iusr_ is given full access to the wwwroot folder asp.net2.0 has been registered etc. But still not working. :( EDIT: Now the password issue has gone off and shows this: Error Type: Microsoft VBScript runtime (0x800A0046) Permission denied: 'GetObject' /localstart.asp, line 40 Browser Type: Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; Trident/4.0; Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1) ; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729) Page: GET /localstart.asp

    Read the article

  • Unresponsive virtual OS

    - by confusedGeek
    Hopefully someone has a suggestion on how to resolve this. Configuration Host: Win 2003R2 w/Virtual Server 2005R2 Virtual1: Win 2003R2 w/Sql Server 2005 Virtual2: Win 2003R2 w/WSS 3.0 Situation This past weekend the power went out and took down the servers (no UPS, it's a desktop standing in as dev testing server). Since the servers went down the Virtual2 server after running WSS fairly heavily for an hour to two will become unresponsive via HTTP. If I login via virtual server's remote control I don't get anything beyond a background screen. The CPU counter on the virtual server's master status shows that it isn't doing anything. The only thing I have been able to do is to turn off Virtual2, which loses any state changes. Shutdown commands issue from the virtual server master status are ignored. After restarting Virtual2 the event logs and application logs don't indicate what caused the problem. Anyone have an idea as to how to repair the OS, or maybe what could be the problem? Thanks ahead of time.

    Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >