Search Results

Search found 16573 results on 663 pages for 'private constructor'.

Page 200/663 | < Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >

  • Why are my connections not closed even if I explicitly dispose of the DataContext?

    - by Chris Simpson
    I encapsulate my linq to sql calls in a repository class which is instantiated in the constructor of my overloaded controller. The constructor of my repository class creates the data context so that for the life of the page load, only one data context is used. In my destructor of the repository class I explicitly call the dispose of the DataContext though I do not believe this is necessary. Using performance monitor, if I watch my User Connections count and repeatedly load a page, the number increases once per page load. Connections do not get closed or reused (for about 20 minutes). I tried putting Pooling=false in my config to see if this had any effect but it did not. In any case with pooling I wouldn't expect a new connection for every load, I would expect it to reuse connections. I've tried putting a break point in the destructor to make sure the dispose is being hit and sure enough it is. So what's happening? Some code to illustrate what I said above: The controller: public class MyController : Controller { protected MyRepository rep; public MyController () { rep = new MyRepository(); } } The repository: public class MyRepository { protected MyDataContext dc; public MyRepository() { dc = getDC(); } ~MyRepository() { if (dc != null) { //if (dc.Connection.State != System.Data.ConnectionState.Closed) //{ // dc.Connection.Close(); //} dc.Dispose(); } } // etc } Note: I add a number of hints and context information to the DC for auditing purposes. This is essentially why I want one connection per page load

    Read the article

  • ASP.NET MVC Viewmodel trouble...

    - by ile
    I've already started similar topic, but still didn't find final solution... So here I am with new one :) ... I'm developing NerdDinner from scratch and now I came to point where I define DinnerViewModel. Following these instructions (starting from Listing 5) I came to this: namespace Nerd.Controllers { // View Model Classes public class DinnerViewModel { public DinnerViewModel(List<Dinner> dinners) { this.Dinners = dinners; } public List<Dinner> Dinners { get; private set; } } public class DinnerController : Controller { private DinnerRepository dinnerRepository = new DinnerRepository(); .... public ActionResult NewDinners() { // Create list of products var dinners = new List<Dinner>(); dinners.Add(new Dinner(/*Something to add*/)); // Return view return View(new DinnerViewModel(dinners)); } } } Also, the Dinner table in this new version of NerdDinner is a bit shortened (it contains of DinnerID, Title, EventDate and Description fields). No matter what I try to add here dinners.Add(new Dinner(/*Something to add*/)); I always get following error Error 1 'Nerd.Model.Dinner' does not contain a constructor that takes '1' arguments C:\Documents and Settings\ilija\My Documents\Visual Studio 2008\Projects\Nerd\Nerd\Controllers\DinnerController.cs 150 25 Nerd Because I'm total beginner in C# and generally OOP, I have no idea what to do here... I suppose I need to declare a constructor, but how and where exactly? Thanks, Ile

    Read the article

  • Program to find the result of primitive recursive functions

    - by alphomega
    I'm writing a program to solve the result of primitive recursive functions: 1 --Basic functions------------------------------ 2 3 --Zero function 4 z :: Int -> Int 5 z = \_ -> 0 6 7 --Successor function 8 s :: Int -> Int 9 s = \x -> (x + 1) 10 11 --Identity/Projection function generator 12 idnm :: Int -> Int -> ([Int] -> Int) 13 idnm n m = \(x:xs) -> ((x:xs) !! (m-1)) 14 15 --Constructors-------------------------------- 16 17 --Composition constructor 18 cn :: ([Int] -> Int) -> [([Int] -> Int)] -> ([Int] -> Int) 19 cn f [] = \(x:xs) -> f 20 cn f (g:gs) = \(x:xs) -> (cn (f (g (x:xs))) gs) these functions and constructors are defined here: http://en.wikipedia.org/wiki/Primitive_recursive_function The issue is with my attempt to create the compositon constructor, cn. When it gets to the base case, f is no longer a partial application, but a result of the function. Yet the function expects a function as the first argument. How can I deal with this problem? Thanks.

    Read the article

  • Change Address/Port of WSDL EndPointAddress at runtime?

    - by Pretzel
    So I currently have 3 WSDLs added as Service References in my solution. They look like this in my app.config file (I removed the "bindings" field, because it's uninteresting): <system.serviceModel> <client> <endpoint address="http://localhost:8080/query-service/jse" binding="basicHttpBinding" bindingConfiguration="QueryBinding" contract="QueryService.Query" name="QueryPort" /> <endpoint address="http://localhost:8080/platetype-service/jse" binding="basicHttpBinding" bindingConfiguration="PlateTypeBinding" contract="PlateTypeService.PlateType" name="PlateTypePort" /> <endpoint address="http://localhost:8080/dataimport-service/jse" binding="basicHttpBinding" bindingConfiguration="DataImportBinding" contract="DataImportService.DataImport" name="DataImportPort" /> </client> </system.serviceModel> When I utilize a WSDL, it looks something like this: using (DataService.DataClient dClient = new DataService.DataClient()) { DataService.importTask impt = new DataService.importTask(); impt.String_1 = "someData"; DataService.importResponse imptr = dClient.importTask(impt); } In the "using" statement, when instantiating the DataClient object, I have 5 constructors available to me. In this scenario, I use the default constructor: new DataService.DataClient() which uses the built-in Endpoint Address string, which is fine and good. But I want the user of the application to have the option to change this value. 1) What's the best/easiest way of programatically obtaining this string? 2) Then, once I've allowed the user to edit and test the value, where should I store it? I'd prefer having it be stored in a place (like app.config or equivalent) so that there is no need for checking whether the value exists or not and whether I should be using an alternate constructor. (Looking to keep my code tight, ya know?) Any ideas? Suggestions?

    Read the article

  • Formatting associative array declaration

    - by Drew Stephens
    When declaring an associative array, how do you handle the indentation of the elements of the array? I've seen a number of different styles (PHP syntax, since that's what I've been in lately). This is a pretty picky and trivial thing, so move along if you're interested in more serious pursuits. 1) Indent elements one more level: $array = array( 'Foo' => 'Bar', 'Baz' => 'Qux' ); 2) Indent elements two levels: $array = array( 'Foo' => 'Bar', 'Baz' => 'Qux' ); 3) Indent elements beyond the array constructor, with closing brace aligned with the start of the constructor: $array = array( 'Foo' => 'Bar', 'Baz' => 'Qux' ); 4) Indent elements beyond the array construct, with closing brace aligned with opening brace: $array = array( 'Foo' => 'Bar', 'Baz' => 'Qux' ); Personally, I like #3—the broad indentation makes it clear that we're at a break point in the code (constructing the array), and having the closing brace floating a bit to the left of all of the array's data makes it clear that this declaration is done.

    Read the article

  • Am I trying to Implement Multiple Inheritance. How can I do this.

    - by Shantanu Gupta
    I have created a class say A which has some functions defined as protected. Now Class B inherits A and class C inherits B. Class A has private default constructor and protected parameterized constructor. I want Class B to be able to access all the protected functions defined in Class A but class C can have access on some of the functions only not all the functions and class C is inheriting class B. How can I restrict access to some of the functions of Class A from Class C ? EDIT: namespace Db { public Class A { private A(){} protected A(string con){assign this value} protected DataTable getTable(){return Table;} protected Sqlparameters setParameters(){return parameter;} } } namespace Data { public Class B:A { protected B():base("constring"){} protected DataTable output(){return getTable();} protected sqlparameter values(param IDataParameter[] parameter){} } } namespace Bsns { public Class C:B { protected C():base(){} protected DataTable show() {return values(setparameter());} } } EDIT I think what I am trying to do here is Multiple inheritance. Please check. Class A { //suppose 10 functions are declared } Class B:A { //5 functions declared which are using A's function in internal body } Class C:B { //using all functions of B but require only 4 functions of A to be accessible by C. }

    Read the article

  • ASP.NET - Accessing copied content

    - by James Kolpack
    I have a class library project which contains some content files configured with the "Copy if newer" copy build action. This results in the files being copied to a folder under ...\bin\ for every project in the solution. In this same solution, I've got a ASP.NET web project (which is MVC, by the way). In the library I have a static constructor load the files into data structures accessible by the web project. Previously I've been including the content as an embedded resource. I now need to be able to replace them without recompiling. I want to access the data in three different contexts: Unit testing the library assembly Debugging the web application Hosting the site in IIS For unit testing, Environment.CurrentDirectory points to a path containing the copied content. When debugging however, it points to C:\Program Files\Microsoft Visual Studio 9.0\Common7\IDE. I've also looked at Assembly.GetExecutingAssembly().Location which points to C:\Windows\Microsoft.NET\Framework\v2.0.50727\Temporary ASP.NET Files\root\c44f9da4\9238ccc\assembly\dl3\eb4c23b4\9bd39460_f7d4ca01\. What I need is to the physical location of the webroot \bin folder, but since I'm in a static constructor in the library project, I don't have access to a Request.PhysicalApplicationPath. Is there some other environment variable or structure where I can always find my "Copy if newer" files?

    Read the article

  • How to reference var from frame on timeline in an object class

    - by brybam
    I'm using Flash Professional cs5/AS3 I'll try and describe this the best I can. I'm new to ActionScript. So, in my timeline I have a var on a frame that represents "lives" and i have some code in the timeline that takes down the number of lives depending on certain events, which all works great. so, now i wanted to make a constructor class that I could reuse for a bunch of movie clip objects and I only want these objects to be able to move if the lives variable is greater than certain number. So now, building my constructor class for these objects i just wanted put an if statement that is looking to see if the lives are greater than a certain number, which if it is then should make these objects do what i want...But, when i run the project I get "1120: Access of undefined property lives." lives is the var I made obviously like I said, and it works fine being referenced everyone else except when I make a new .as file for these objects then try and reference it. I get the same error when I try and establish "lives" in the main project class too. I'm not sure where I should put this var or how I can make it so i can reference it from an object class. I'm not really sure how to word or describe my issue which has made it hard to search for a tutorial. Any suggestions i'm sure this has to be a simple task.

    Read the article

  • Clear tableView cell cache (or remove an entry)

    - by ManniAT
    Hi, I have the same question problem as described here http://stackoverflow.com/questions/2286669/iphone-how-to-purge-a-cached-uitableviewcell But my problem can't be solved with "resetting content". To be precise - I use a custom cell (own class). While running the application it is possible that I have to use a different "cell type". It's the same class - but it has (a lot of) differnt attributes. Of course I could always reset all the things at "PrepareForReuse" but that's not a good idea I guess (there are a lot things to reset). My idea - I do all these things in the constructor of the cell. And all the rows will use this "type of cell" later. When the (seldom) situation comes that I have to change the look of all rows I create a new instance of this kind of cell with different settings. And now I want to replace the queued cell with this new one. I tried it with simply calling the constructor with the same cellidentifier (in the hope it will replace the existing one) but that doesn't work. I also didn't find a "ClearReusableCells" or something like this. Is there a way to clear the cache - or to remove / replace a specific item? Manfred

    Read the article

  • STL vector performance

    - by iAdam
    STL vector class stores a copy of the object using copy constructor each time I call push_back. Wouldn't it slow down the program? I can have a custom linkedlist kind of class which deals with pointers to objects. Though it would not have some benefits of STL but still should be faster. See this code below: #include <vector> #include <iostream> #include <cstring> using namespace std; class myclass { public: char* text; myclass(const char* val) { text = new char[10]; strcpy(text, val); } myclass(const myclass& v) { cout << "copy\n"; //copy data } }; int main() { vector<myclass> list; myclass m1("first"); myclass m2("second"); cout << "adding first..."; list.push_back(m1); cout << "adding second..."; list.push_back(m2); cout << "returning..."; myclass& ret1 = list.at(0); cout << ret1.text << endl; return 0; } its output comes out as: adding first...copy adding second...copy copy The output shows the copy constructor is called both times when adding and when retrieving the value even then. Does it have any effect on performance esp when we have larger objects?

    Read the article

  • How to set a TCustomControl's Parent In Create

    - by Bill
    When we create a component as a custom control and the control is dropped on a panel the control always appears on the form rather than the containing control. How do you set the parent of the custom control in Create so that when the button is dropped on panel the buttons parent is the panel? TGlassButton = class(TCustomControl) ... public { Public declarations } constructor Create(AOwner: TComponent); override; ... constructor TGlassButton.Create(AOwner: TComponent); begin inherited; ??????????? inherited Create(AOwner); ???????????? Parent := TWinControl( AComponent ); ?????????????? ... end; The problem is designtime creation not runtime. This works perfectly: procedure TForm10.FormCreate(Sender: TObject); begin GlassButton0 := TGlassButton.Create( Panel1 ); GlassButton0.Parent := Panel1; GlassButton0.Left := 20; GlassButton0.Top := 6; GlassButton0.Width := 150; GlassButton0.Height := 25; GlassButton0.Caption := 'Created At RunTime'; end;

    Read the article

  • Improve this generic abstract class

    - by Keivan
    I have the following abstract class design, I was wondering if anyone can suggest any improvements in terms of stronger enforcement of our requirements or simplifying implementing of the ControllerBase. //Dependency Provider base public abstract class ControllerBase<TContract, TType> where TType : TContract, class { public static TContract Instance { get { return ComponentFactory.GetComponent<TContract, TType>(); } } public TContract GetComponent<TContract, TType>() where TType : TContract, class { component = (TType)Activator.CreateInstance(typeof(TType), true); RegisterComponentInstance<TContract>(component); } } //Contract public interface IController { void DoThing(); } //Actual Class Logic public class Controller: ControllerBase<IController,Controller> { public void DoThing(); //internal constructor internal Controller(){} } //Usage public static void Main() { Controller.Instance.DoThing(); } The following facts should always be true, TType should always implement TContract (Enforced using a generic constraint) TContract must be an interface (Can't find a way to enforce it) TType shouldn't have public constructor, just an internal one, is there any way to Enforce that using ControllerBase? TType must be an concrete class (Didn't include New() as a generic constrain since the constructors should be marked as Internal)

    Read the article

  • clang does not compile but g++ does

    - by user1095108
    Can someone help me with this code: #include <type_traits> #include <vector> struct nonsense { }; template <struct nonsense const* ptr, typename R> typename std::enable_if<!std::is_void<R>::value, int>::type fo(void* const) { return 0; } template <struct nonsense const* ptr, typename R> typename std::enable_if<std::is_void<R>::value, int>::type fo(void* const) { return 1; } typedef int (*func_type)(void*); template <std::size_t O> void run_me() { static struct nonsense data; typedef std::pair<char const* const, func_type> pair_type; std::vector<pair_type> v; v.push_back(pair_type{ "a", fo<&data, int> }); v.push_back(pair_type{ "b", fo<&data, void> }); } int main(int, char*[]) { run_me<2>(); return 0; } clang-3.3 does not compile this code, but g++-4.8.1 does, which of the two compiler is right? Is something wrong with the code, as I suspect? The error reads: a.cpp:32:15: error: no matching constructor for initialization of 'pair_type' (aka 'pair<const char *const, func_type>') v.push_back(pair_type{ "a", fo<&data, int> }); ^ ~~~~~~~~~~~~~~~~~~~~~~~ a.cpp:33:15: error: no matching constructor for initialization of 'pair_type' (aka 'pair<const char *const, func_type>') v.push_back(pair_type{ "b", fo<&data, void> }); ^ ~~~~~~~~~~~~~~~~~~~~~~~~

    Read the article

  • QListWidget drag and drop items disappearing from list

    - by ppalasek
    Hello, I'm having trouble implementing a QListWidget with custom items that can be reordered by dragging and dropping. The problem is when I make a fast double click (a very short drag&drop) on an item, the item sometimes disappears from the QListWidget. This is the constructor for my Widget: ListPopisiDragDrop::ListPopisiDragDrop(QWidget *parent) : QListWidget(parent) { setSelectionMode(QAbstractItemView::SingleSelection); setDragEnabled(true); viewport()->setAcceptDrops(true); setDefaultDropAction(Qt::MoveAction); setDropIndicatorShown(true); setDragDropMode(QAbstractItemView::InternalMove); } also the drop event: void ListPopisiDragDrop::dropEvent(QDropEvent *event){ int startRow=currentIndex().row(); QListWidget::dropEvent(event); int endRow=currentIndex().row(); //more code... } Custom items are made by implementing paint() and sizeHint() functions from QAbstractItemDelegate. When the problem with disappearing items happens, the dropEvent isn't even called. I really don't know what is happening and if I'm doing something wrong. Any help is appreciated. Thanks! Edit: I'm running the application on a Symbian S60 5th edition phone. Edit2: If I add this line to the constructor: setDragDropOverwriteMode(true); the item in the list still disappears, but an empty row stays in it's place.

    Read the article

  • c# Unable to open file for reading

    - by Maks
    I'm writing a program that uses FileSystemWatcher to monitor changes to a given directory, and when it recieves OnCreated or OnChanged event, it copies those created/changed files to a specified directorie(s). At first I had problems with the fact that OnChanged/OnCreated events can be sent twice (not acceptable in case it needed to process 500MB file) but I made a way around this and with what I'm REALLY STUCKED with is getting the following IOException: The process cannot access the file 'C:\Where are Photos\bookmarks (11).html' because it is being used by another process. Thus, preventing the program from copying all the files it should. So as I mentioned, when user uses this program he/she specifes monitored directory, when user copies/creates/changes file in that directory, program should get OnCreated/OnChanged event and then copy that file to few other directories. Above error happens in all casess, if user copies few files that needs to owerwrite other ones in folder being monitored or when copying bulk of several files or even sometimes when copying one file in a monitored directory. Whole program is quite big so I'm sending the most important parts. OnCreated: private void OnCreated(object source, FileSystemEventArgs e) { AddLogEntry(e.FullPath, "created", ""); // Update last access data if it's file so the same file doesn't // get processed twice because of sending another event. if (fileType(e.FullPath) == 2) { lastPath = e.FullPath; lastTime = DateTime.Now; } // serves no purpose now, it will be remove soon string fileName = GetFileName(e.FullPath); // copies file from source to few other directories Copy(e.FullPath, fileName); Console.WriteLine("OnCreated: " + e.FullPath); } OnChanged: private void OnChanged(object source, FileSystemEventArgs e) { // is it directory if (fileType(e.FullPath) == 1) return; // don't mind directory changes itself // Only if enough time has passed or if it's some other file // because two events can be generated int timeDiff = ((TimeSpan)(DateTime.Now - lastTime)).Seconds; if ((timeDiff < minSecsDiff) && (e.FullPath.Equals(lastPath))) { Console.WriteLine("-- skipped -- {0}, timediff: {1}", e.FullPath, timeDiff); return; } // Update last access data for above to work lastPath = e.FullPath; lastTime = DateTime.Now; // Only if size is changed, the rest will handle other handlers if (e.ChangeType == WatcherChangeTypes.Changed) { AddLogEntry(e.FullPath, "changed", ""); string fileName = GetFileName(e.FullPath); Copy(e.FullPath, fileName); Console.WriteLine("OnChanged: " + e.FullPath); } } fileType: private int fileType(string path) { if (Directory.Exists(path)) return 1; // directory else if (File.Exists(path)) return 2; // file else return 0; } Copy: private void Copy(string srcPath, string fileName) { foreach (string dstDirectoy in paths) { string eventType = "copied"; string error = "noerror"; string path = ""; string dirPortion = ""; // in case directory needs to be made if (srcPath.Length > fsw.Path.Length) { path = srcPath.Substring(fsw.Path.Length, srcPath.Length - fsw.Path.Length); int pos = path.LastIndexOf('\\'); if (pos != -1) dirPortion = path.Substring(0, pos); } if (fileType(srcPath) == 1) { try { Directory.CreateDirectory(dstDirectoy + path); //Directory.CreateDirectory(dstDirectoy + fileName); eventType = "created"; } catch (IOException e) { eventType = "error"; error = e.Message; } } else { try { if (!overwriteFile && File.Exists(dstDirectoy + path)) continue; // create new dir anyway even if it exists just to be sure Directory.CreateDirectory(dstDirectoy + dirPortion); // copy file from where event occured to all specified directories using (FileStream fsin = new FileStream(srcPath, FileMode.Open, FileAccess.Read, FileShare.Read)) { using (FileStream fsout = new FileStream(dstDirectoy + path, FileMode.Create, FileAccess.Write)) { byte[] buffer = new byte[32768]; int bytesRead = -1; while ((bytesRead = fsin.Read(buffer, 0, buffer.Length)) > 0) fsout.Write(buffer, 0, bytesRead); } } } catch (Exception e) { if ((e is IOException) && (overwriteFile == false)) { eventType = "skipped"; } else { eventType = "error"; error = e.Message; // attempt to find and kill the process locking the file. // failed, miserably System.Diagnostics.Process tool = new System.Diagnostics.Process(); tool.StartInfo.FileName = "handle.exe"; tool.StartInfo.Arguments = "\"" + srcPath + "\""; tool.StartInfo.UseShellExecute = false; tool.StartInfo.RedirectStandardOutput = true; tool.Start(); tool.WaitForExit(); string outputTool = tool.StandardOutput.ReadToEnd(); string matchPattern = @"(?<=\s+pid:\s+)\b(\d+)\b(?=\s+)"; foreach (Match match in Regex.Matches(outputTool, matchPattern)) { System.Diagnostics.Process.GetProcessById(int.Parse(match.Value)).Kill(); } Console.WriteLine("ERROR: {0}: [ {1} ]", e.Message, srcPath); } } } AddLogEntry(dstDirectoy + path, eventType, error); } } I checked everywhere in my program and whenever I use some file I use it in using block so even writing event to log (class for what I ommited since there is probably too much code already in post) wont lock the file, that is it shouldn't since all operations are using using statement block. I simply have no clue who's locking the file if not my program "copy" process from user through Windows or something else. Right now I have two possible "solutions" (I can't say they are clean solutions since they are hacks and as such not desireable). Since probably the problem is with fileType method (what else could lock the file?) I tried changing it to this, to simulate "blocking-until-ready-to-open" operation: fileType: private int fileType(string path) { FileStream fs = null; int ret = 0; bool run = true; if (Directory.Exists(path)) ret = 1; else { while (run) { try { fs = new FileStream(path, FileMode.Open); ret = 2; run = false; } catch (IOException) { } finally { if (fs != null) { fs.Close(); fs.Dispose(); } } } } return ret; } This is working as much as I could tell (test), but... it's hack, not to mention other deficients. The other "solution" I could try (I didn't test it yet) is using GC.Collect() somewhere at the end of fileType() method. Maybe even worse "solution" than previous one. Can someone pleas tell me, what on earth is locking the file, preventing it from opening and how can I fix that? What am I missing to see? Thanks in advance.

    Read the article

  • StringIndexOutOfBoundsException error in main method

    - by Ro Siv
    I am obtaining a StringIndexOutOfBoundsError when running my main method. Here is the output of my program in the command line. "Please enter the shift, 1 for day, 2 for night" 1 "you entered a number for the shift" "Please enter the hourly pay Rate" 2 "you entered a number for the pay Rate" "Please enter the employees name" brenda "cat6b" "your value you entered is correct 0-9 or a - z" "Please enter the employee number" 100e "cat41" "your value you entered is correct 0-9 or a - z" "Please enter current date in XXYYZZZZ format, X is day, Y is month, Z is year" 10203933 "cat81 " "your value you entered is correct 0-9 or a - z" 90 1 valye of array is 1 81 0 value of array is 0 82 2 value of array is 2 83 0 value of array is 0 84 3 value of array is 3 85 9 value of array is 9 86 3 value of array is 3 87 3 value of array is 3 "Exception in thread "main" java.lang.StringIndexOutOfBoundsException: String index out of range: 8 at java.lang.String.charAt(String.java:658) at ProductionWorker<init>(ProductionWorker.java:66) at labBookFiftyFour.main(labBookFiftyFour.java:58)" "Press any key to continue . . ." Ignore the cat parts in the code, i was using a println statement to test the code. Ignore the value of array output as well, as i wanted to use an array in the program later on. Here is my main method. import java.math.*; import java.text.DecimalFormat; import java.io.*; import java.util.*; public class labBookFiftyFour { public static void main(String[] args) { Scanner myInput = new Scanner(System.in); int shift = -1; double pRate = -2; String name = " "; String number = " "; String date = " "; while(shift < 0 || pRate < 0 ) { System.out.println("Please enter the shift, 1 for day, 2 for night"); if(myInput.hasNextInt()){ System.out.println("you entered a number for the shift"); shift = myInput.nextInt(); } System.out.println("Please enter the hourly pay Rate"); if(myInput.hasNextDouble()){ System.out.println("you entered a number for the pay Rate"); pRate = myInput.nextDouble(); } else if (myInput.hasNext()) { System.out.println("Please enter a proper value"); myInput.next(); } else { System.err.println("No more input"); System.exit(1); } } myInput.nextLine(); //consume newLine System.out.println("Please enter the employees name"); name = myInput.nextLine(); //use your isValid method if(isValid(name)) { System.out.println("your value you entered is correct 0-9 or a - z "); } System.out.println("Please enter the employee number"); number = myInput.nextLine(); //use your isValid method if(isValid(number)) { System.out.println("your value you entered is correct 0-9 or a - z "); } System.out.println("Please enter current date in XXYYZZZZ format, X is day, Y is month, Z is year"); date = myInput.nextLine(); //use your isValid method if(isValid(date)) { System.out.println("your value you entered is correct 0-9 or a - z "); } ProductionWorker myWorker = new ProductionWorker(shift, pRate, name, number, date); //int day and night , double payRate System.out.println("THis is the shift " + myWorker.getShift() + " This is the pay Rate " + myWorker.getPRate() + " " + myWorker.getName() + " " + myWorker.getNumber() + " " + myWorker.getDate()); } //Made this method for testing String input for 0-9 or a - z values , put AFTER main method, but before end of class public static boolean isValid(String stringName) //This method has to be static, for some reason? { System.out.println("cat" + stringName.length() + stringName.charAt(0)); boolean flag = true; int index = 0; while(index < stringName.length()) { if(Character.isLetterOrDigit(stringName.charAt(index))) { flag = true; } else { flag = false; } ++index; } return flag; } } Here is my employeeOne. java Superclass public class employeeOne { private String name; private String number; private String date; public employeeOne(String name, String number, String date) { this.name = name; this.number = number; this.date = date; } public String getName() { return name; } public String getNumber() { return number; } public String getDate() { return date; } } Here is my ProductionWorker.java subclass, which extends employeeOne public class ProductionWorker extends employeeOne { private int shift; //shift represents day or night, day = 1, night = 2 private double pRate; //hourly pay rate public ProductionWorker(int shift, double pRate, String name, String number, String date) { super(name, number, date); this.shift = shift; if(this.shift >= 3 || this.shift <= 0) { System.out.println("You entered an out of bounds shift date, enter 1 for day or 2 for night, else shift will be day"); this.shift = 1; } this.pRate = pRate; boolean goodSoFar = true; int indexNum = 0; int indexDate = 0; if(name.length() <= 10 && number.length() <= 4 && date.length() < 9 ) { goodSoFar = true; } else { goodSoFar = false; } while(goodSoFar && indexNum < 3) //XXXL XXX digits 1-9, L is a letter A -M { if(Character.isDigit(number.charAt(indexNum))) { goodSoFar = true; } else { goodSoFar = false; } ++indexNum; } while(goodSoFar && indexNum < 4) { if(Character.isLetter(number.charAt(indexNum))) { goodSoFar = true; } else if(Character.isDigit(number.charAt(indexNum))) { goodSoFar = false; } else if(Character.isDigit(number.charAt(indexNum)) == false && Character.isLetter(number.charAt(indexNum)) == false) { goodSoFar = false; } ++indexNum; } int[] dateValues = new int[date.length()]; while(goodSoFar && indexDate <= date.length()) //XXYYZZZZ { System.out.println("" + date.length() + indexDate + " " + date.charAt(indexDate)); if(Character.isDigit(date.charAt(indexDate))) { dateValues[indexDate] = Character.getNumericValue(date.charAt(indexDate)); System.out.println("value of array is " + dateValues[indexDate]); ++indexDate; } else { goodSoFar = false; } } if(goodSoFar) { System.out.println("your input is good so far"); } else { System.out.println("your input is wrong for name or number or date"); } } public int getShift() { return shift; } public double getPRate() { return pRate; } }

    Read the article

  • Stuck trying to get Log4Net to work with Dependency Injection

    - by Pure.Krome
    I've got a simple winform test app i'm using to try some Log4Net Dependency Injection stuff. I've made a simple interface in my Services project :- public interface ILogging { void Debug(string message); // snip the other's. } Then my concrete type will be using Log4Net... public class Log4NetLogging : ILogging { private static ILog Log4Net { get { return LogManager.GetLogger( MethodBase.GetCurrentMethod().DeclaringType); } } public void Debug(string message) { if (Log4Net.IsDebugEnabled) { Log4Net.Debug(message); } } } So far so good. Nothing too hard there. Now, in a different project (and therefore namesapce), I try and use this ... public partial class Form1 : Form { public Form1() { FileInfo fileInfo = new FileInfo("Log4Net.config"); log4net.Config.XmlConfigurator.Configure(fileInfo); } private void Foo() { // This would be handled with DI, but i've not set it up // (on the constructor, in this code example). ILogging logging = new Log4NetLogging(); logging.Debug("Test message"); } } Ok .. also pretty simple. I've hardcoded the ILogging instance but that is usually dependency injected via the constructor. Anyways, when i check this line of code... return LogManager.GetLogger(MethodBase.GetCurrentMethod().DeclaringType); the DeclaringType type value is of the Service namespace, not the type of the Form (ie. X.Y.Z.Form1) which actually called the method. Without passing the type INTO method as another argument, is there anyway using reflection to figure out the real method that called it?

    Read the article

  • C/C++ macro/template blackmagic to generate unique name.

    - by anon
    Macros are fine. Templates are fine. Pretty much whatever it works is fine. The example is OpenGL; but the technique is C++ specific and relies on no knowledge of OpenGL. Precise problem: I want an expression E; where I do not have to specify a unique name; such that a constructor is called where E is defined, and a destructor is called where the block E is in ends. For example, consider: class GlTranslate { GLTranslate(float x, float y, float z); { glPushMatrix(); glTranslatef(x, y, z); } ~GlTranslate() { glPopMatrix(); } }; Manual solution: { GlTranslate foo(1.0, 0.0, 0.0); // I had ti give it a name ..... } // auto popmatrix Now, I have this not only for glTranslate, but lots of other PushAttrib/PopAttrib calls too. I would prefer not to have to come up with a unique name for each var. Is there some trick involving macros templates ... or something else that will automatically create a variable who's constructor is called at point of definition; and destructor called at end of block? Thanks!

    Read the article

  • Design by contracts and constructors

    - by devoured elysium
    I am implementing my own ArrayList for school purposes, but to spice up things a bit I'm trying to use C# 4.0 Code Contracts. All was fine until I needed to add Contracts to the constructors. Should I add Contract.Ensures() in the empty parameter constructor? public ArrayList(int capacity) { Contract.Requires(capacity > 0); Contract.Ensures(Size == capacity); _array = new T[capacity]; } public ArrayList() : this(32) { Contract.Ensures(Size == 32); } I'd say yes, each method should have a well defined contract. On the other hand, why put it if it's just delegating work to the "main" constructor? Logicwise, I wouldn't need to. The only point I see where it'd be useful to explicitly define the contract in both constructors is if in the future we have Intelisense support for contracts. Would that happen, it'd be useful to be explicit about which contracts each method has, as that'd appear in Intelisense. Also, are there any books around that go a bit deeper on the principles and usage of Design by Contracts? One thing is having knowledge of the syntax of how to use Contracts in a language (C#, in this case), other is knowing how and when to use it. I read several tutorials and Jon Skeet's C# in Depth article about it, but I'd like to go a bit deeper if possible. Thanks

    Read the article

  • Problem: Movie Clip contains just one frame

    - by Doug
    I'm a newbie at Flash, so started playing with a pretty standard code sample: one layer contains a movie clip with a flying rectangle, another layer has a button to control it. All script code is in Main.as file. The rectangle was named square1 through the Property window. Here is the problem: the constructor for Main has a line: square1.stop(); to prevent clip from playing, but it doesn't help - it plays. I know the constructor fires, because it has trace("stuff") in it. The code does check that the stage has been created. What strange is that square1.currentFrame always returns 1, and square1.totalFrames returns 1 as well. The layer has 24 frames on the timeline. I tried a tween with just 2 keyframes, then converted whole tween into frames - same result. I mean, the thing is flying before my eyes, how can it be 1 frame??? I even added a listener: square1.addEventListener(Event.ENTER_FRAME, onFrameChange); The event fires all the time, i.e. the frames change, but currentFrame is still 1. Also, tried to name individual frames and use square1.gotoAndStop("begin") and stuff like that. Nothing helps. I am really stuck with this stupid problem.

    Read the article

  • C++ Dynamic Allocation Mismatch: Is this problematic?

    - by acanaday
    I have been assigned to work on some legacy C++ code in MFC. One of the things I am finding all over the place are allocations like the following: struct Point { float x,y,z; }; ... void someFunc( void ) { int numPoints = ...; Point* pArray = (Point*)new BYTE[ numPoints * sizeof(Point) ]; ... //do some stuff with points ... delete [] pArray; } I realize that this code is atrociously wrong on so many levels (C-style cast, using new like malloc, confusing, etc). I also realize that if Point had defined a constructor it would not be called and weird things would happen at delete [] if a destructor had been defined. Question: I am in the process of fixing these occurrences wherever they appear as a matter of course. However, I have never seen anything like this before and it has got me wondering. Does this code have the potential to cause memory leaks/corruption as it stands currently (no constructor/destructor, but with pointer type mismatch) or is it safe as long as the array just contains structs/primitive types?

    Read the article

  • Unable to Get values from Web Form to a PHP Class to Display

    - by kentrenholm
    I am having troubles getting the value from my variables submitted via a web form using a PHP class file. Here is my structure of the web page: Order Form Page Process.php Page Book.php Page I can easily get the user data entered (on Order Form Page), process, and display it on the Process.php page. The issue is that I must create a Book class and print the details of the data using the Book class. I have an empty constructor printing out "created" so I know my constructor is being called. I also am able to print the word "title" so I know I can print to the screen by using the Book class. My issue is that I can't get values in my variables in the Book class. Here is my variable declaration: private $title; Here is my printDetails function: public function printDetails () { echo "Title: " . $this->title . "<br />"; } Here is my new instance of the book class: $bookNow = new book; Here are my get and set functions: function __getTitle($title) { return $this->$title; } function __setTitle($title,$value) { $this->$title = $value; } I do have four other variables that I'm looking to display as well. Each of those have their own variable declaration, a line in printDetails, and their own setter and getter. Lastly, I also have a call to the Book class in my process PHP. It looks like this: function __autoload($book) { include $book . '.php'; } $bookNow = new book(); Any help, much appreciated. It must be something so very small (I'm hoping).

    Read the article

  • Passing ActionListeners in Java, pack()

    - by Crystal
    Two questions. First question is I'm trying to create a simple form that when you press a button, it adds a Person object to the ArrayList. However, since I am not used to GUIs, I tried creating one and am first just trying to get the user input from the JTextField, create an ActionListener object of the appropriate type, so once that works, then I can pass in all the JTextField inputs to create my Person object. Unfortunately, I am not getting any data when I type in something to the firstName JTextField and was wondering if someone could look at my code below. import java.awt.*; import java.awt.event.*; import javax.swing.*; import java.util.List; import java.util.ArrayList; public class AddressBook { public static void main(String[] args) { EventQueue.invokeLater(new Runnable() { public void run() { AddressBookFrame frame = new AddressBookFrame(); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); JMenuBar menuBar = new JMenuBar(); frame.setJMenuBar(menuBar); JMenu fileMenu = new JMenu("File"); JMenuItem openItem = new JMenuItem("Open"); JMenuItem saveItem = new JMenuItem("Save"); JMenuItem saveAsItem = new JMenuItem("Save As"); JMenuItem printItem = new JMenuItem("Print"); JMenuItem exitItem = new JMenuItem("Exit"); fileMenu.add(openItem); fileMenu.add(saveItem); fileMenu.add(saveAsItem); fileMenu.add(printItem); fileMenu.add(exitItem); menuBar.add(fileMenu); JMenu editMenu = new JMenu("Edit"); JMenuItem newItem = new JMenuItem("New"); JMenuItem editItem = new JMenuItem("Edit"); JMenuItem deleteItem = new JMenuItem("Delete"); JMenuItem findItem = new JMenuItem("Find"); JMenuItem firstItem = new JMenuItem("First"); JMenuItem previousItem = new JMenuItem("Previous"); JMenuItem nextItem = new JMenuItem("Next"); JMenuItem lastItem = new JMenuItem("Last"); editMenu.add(newItem); editMenu.add(editItem); editMenu.add(deleteItem); editMenu.add(findItem); editMenu.add(firstItem); editMenu.add(previousItem); editMenu.add(nextItem); editMenu.add(lastItem); menuBar.add(editMenu); JMenu helpMenu = new JMenu("Help"); JMenuItem documentationItem = new JMenuItem("Documentation"); JMenuItem aboutItem = new JMenuItem("About"); helpMenu.add(documentationItem); helpMenu.add(aboutItem); menuBar.add(helpMenu); frame.setVisible(true); } }); } } class AddressBookFrame extends JFrame { public AddressBookFrame() { setLayout(new BorderLayout()); setTitle("Address Book"); setSize(DEFAULT_WIDTH, DEFAULT_HEIGHT); AddressBookToolBar toolBar = new AddressBookToolBar(); add(toolBar, BorderLayout.NORTH); AddressBookStatusBar aStatusBar = new AddressBookStatusBar("5"); add(aStatusBar, BorderLayout.SOUTH); AddressBookForm form = new AddressBookForm(); add(form, BorderLayout.CENTER); } public static final int DEFAULT_WIDTH = 500; public static final int DEFAULT_HEIGHT = 500; } /* Create toolbar buttons and add buttons to toolbar */ class AddressBookToolBar extends JPanel { public AddressBookToolBar() { setLayout(new FlowLayout(FlowLayout.LEFT)); JToolBar bar = new JToolBar(); JButton newButton = new JButton("New"); JButton editButton = new JButton("Edit"); JButton deleteButton = new JButton("Delete"); JButton findButton = new JButton("Find"); JButton firstButton = new JButton("First"); JButton previousButton = new JButton("Previous"); JButton nextButton = new JButton("Next"); JButton lastButton = new JButton("Last"); bar.add(newButton); bar.add(editButton); bar.add(deleteButton); bar.add(findButton); bar.add(firstButton); bar.add(previousButton); bar.add(nextButton); bar.add(lastButton); add(bar); } } /* Creates the status bar string */ class AddressBookStatusBar extends JPanel { public AddressBookStatusBar(String statusBarString) { setLayout(new FlowLayout(FlowLayout.LEFT)); this.statusBarString = new JLabel("Total number of people: " + statusBarString); add(this.statusBarString); } private JLabel statusBarString; private int totalContacts; } class AddressBookForm extends JPanel { public AddressBookForm() { this.setLayout(new GridLayout(2, 1)); JPanel formPanel = new JPanel(); formPanel.setLayout(new GridLayout(4, 2)); JTextField firstName = new JTextField(20); JTextField lastName = new JTextField(20); JTextField telephone = new JTextField(20); JTextField email = new JTextField(20); JLabel firstNameLabel = new JLabel("First Name: ", JLabel.LEFT); formPanel.add(firstNameLabel); formPanel.add(firstName); JLabel lastNameLabel = new JLabel("Last Name: ", JLabel.LEFT); formPanel.add(lastNameLabel); formPanel.add(lastName); JLabel telephoneLabel = new JLabel("Telephone: ", JLabel.LEFT); formPanel.add(telephoneLabel); formPanel.add(telephone); JLabel emailLabel = new JLabel("Email: ", JLabel.LEFT); formPanel.add(emailLabel); formPanel.add(email); add(formPanel); JPanel buttonPanel = new JPanel(); JButton insertButton = new JButton("Insert"); JButton displayButton = new JButton("Display"); // create button actions AddressBookManager insertAction = new AddressBookManager(firstName.getText()); insertButton.addActionListener(insertAction); buttonPanel.add(insertButton); buttonPanel.add(displayButton); add(buttonPanel); } private List<Person> addressList = new ArrayList<Person>(); private class AddressBookManager implements ActionListener { public AddressBookManager(String text) { // addressList.add( setName(text); System.out.println("Test" + text); } public void actionPerformed(ActionEvent e) { System.out.println("Hello" + name); } public void setName(String name) { this.name = name; } private String name; } } Second question is, how do I make my form not take up the whole center space. I don't like the stretch look and was hoping the JTextFields could be just one line long, not a big box. Same thing with the buttons. Any thoughts? Thanks.

    Read the article

  • C++ OOP - Can you 'overload a cast' <- hard to explain in 1 sentence

    - by Brandon Miller
    Well, the WinAPI has a POINT struct, but I am trying to make an alternative class to this so you can set the values of x and y from a constructor. /** * X-Y coordinates */ class Point { public: int X, Y; Point(void) : X(0), Y(0) {} Point(int x, int y) : X(x), Y(y) {} Point(const POINT& pt) : X(pt.x), Y(pt.y) {} Point& operator= (const POINT& other) { X = other.x; Y = other.y; } }; // I have an assignment operator and copy constructor. Point myPtA(3,7); Point myPtB(8,5); POINT pt; pt.x = 9; pt.y = 2; // I can assign a 'POINT' to a 'Point' myPtA = pt; // But I also want to be able to assign a 'Point' to a 'POINT' pt = myPtB; Is it possible to overload operator= in a way so that I can assign a Point to a POINT? Or maybe some other method to achieve this? Thanks in advance.

    Read the article

  • C++ class derivation and superconstructor confusion

    - by LukeN
    Hey, in a tutorial C++ code, I found this particular piece of confusion: PlasmaTutorial1::PlasmaTutorial1(QObject *parent, const QVariantList &args) : Plasma::Applet(parent, args), // <- Okay, Plasma = namespace, Applet = class m_svg(this), // <- A member function of class "Applet"? m_icon("document") // <- ditto? { m_svg.setImagePath("widgets/background"); // this will get us the standard applet background, for free! setBackgroundHints(DefaultBackground); resize(200, 200); } I'm not new to object oriented programming, so class derivation and super-classes are nothing complicated, but this syntax here got me confused. The header file defines the class like this: class PlasmaTutorial1 : public Plasma::Applet { Similar to above, namespace Plasma and class Applet. But what's the public doing there? I fear that I already know the concept but don't grasp the C++ syntax/way of doing it. In this question I picked up that these are called "superconstructors", at least that's what stuck in my memory, but I don't get this to the full extend. If we glance back at the first snippet, we see Constructor::Class(...) : NS::SuperClass(...), all fine 'till here. But what are m_svg(this), m_icon("document") doing there? Is this some kind of method to make these particular functions known to the derivated class? Is this part of C++ basics or more immediate? While I'm not completly lost in C++, I feel much more at home in C :) Most of the OOP I have done so far was done in D, Ruby or Python. For example in D I would just define class MyClass : MySuperClass, override what I needed to and call the super class' constructor if I'd need to.

    Read the article

< Previous Page | 196 197 198 199 200 201 202 203 204 205 206 207  | Next Page >