Search Results

Search found 8962 results on 359 pages for 'abstract factory pattern'.

Page 201/359 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• Will my Lenovo One Key Recovery work if I install Ubuntu on my Ideapad U410?

  - by dostiharise

  I own a Lenovo Ideapad U410. Being a game developer the first thing that I wanted to do is install Ubuntu. But I don't want to lose the Windows 7 that ships with the laptop. So, I wanted to know if the Lenovo One Key Recovery mechanism is capable of restoring the Windows 7, from the hidden recovery partition, after I install Ubunutu and enable Grub boot loader? Note: I am already aware that an alternative would be to create Factory Restore disks, to restore when necessary. But I cannot immediately do it unless I buy an External DVD Burner.

  Read the article

• unusual webpage access problem

  - by user28163

  This is one of the weirdest problems I've ever seen and I'm out of ideas. I cannot access a couple of websites from my home pc (for 3-4 days now), or at least they go really really slow ~700b/s I can access these same websites fine from my laptop from same IP address. - The websites originate from different countries and are huge popular sites. - I have tried both my PC's network cards. - I have reformatted my PC. - I have reset my router to factory settings. - I have created virtual computers on my PC, and from inside those I cannot access the webpages. - I have flushed my dns. - I tried specifying my dns server addresses to 8.8.8.8 and 8.8.4.4. I can only access the webpages using my PC, if I first connect to an outside VPN. Again, these sites work fine on the 2 other pcs in this house (same ISP and internet connection). help plz :)

  Read the article

• Duplicate GET request from multiple IPs - can anyone explain this?

  - by dwq

  We've seen a pattern in our webserver access logs which we're having problem explaining. A GET request appears in the access log which is a legitimate, but private, url as part of normal e-commerce website use (by private, we mean there is a unique key in a url form variable generated specifically for that customer session). Then a few seconds later we get hit with an identical request maybe 10-15 times within the space of a second. The duplicate requests are all from different IP addresses. The UserAgent for the duplicates are all the same (but different from the original request). The reverse DNS lookup on the IPs for all the duplicates requests resolve to the same large hosting company. Can anyone think of a scenario what would explain this? EDIT 1 Here's an example that's probably anonymised beyond being any actual use, but it might give an idea of the sort of pattern we're seeing (it's from a search query as they sometimes get duplicated too): xx.xx.xx.xx - - [21/Jun/2013:21:42:57 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "http://www.ourdomain.com/index.html" "Mozilla/5.0 (compatible; MSIE 10.0; Windows NT 6.1; WOW64; Trident/6.0)" xx.xx.xx.xx - - [21/Jun/2013:21:43:03 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:03 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" xx.xx.xx.xx - - [21/Jun/2013:21:43:04 +0100] "GET /search.html?search=widget&Submit=Search HTTP/1.0" 200 5475 "" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_6_7) AppleWebKit/534.30 (KHTML, like Gecko) Chrome/12.0.742.91 Safari/534.30" UPDATE 2 Sometimes it is part of a checkout flow that's duplicated to I'd think twitter is unlikely.

  Read the article

• Losing partitions after every reboot

  - by Winston Smith

  I have an Acer laptop with one hard disk, which up until yesterday had 4 partitions: Recovery Partition (13GB) C: (140GB) D: (130GB) OEM Partition (10GB) I read that the OEM partition has all the stuff needed to restore the laptop to the factory settings, but since I'd already created restore disks and I needed the space, I wanted to get rid of it. Yesterday, I used diskpart to do that. In diskpart, I selected the OEM partition and issued the delete partition override command which removed it. Then I extended the D: partition into the unused space using windows disk management. Everything worked fine, until I rebooted my laptop, at which point the D: drive vanished. Looking in windows disk management again, I can see that there's an OEM partition of 140GB, which is obviously my D: drive. So I used EASEUS Partition Master and assigned a drive letter to the 'OEM' partition and I was able to access my files again. However, every time I reboot, it reverts back. How do I fix this permanently?

  Read the article

• Screen resolution of monitor is wrong every time I turn the computer on?

  - by utahco

  Hi, Im just wondering if there is a solution to my weird problem. Every time I turn on my PC the viewport isn't aligned correctly on the screen - there is always a black strip on the right hand side. This is not a big issue as it can be resolved by pressing the menu button on the screen and doing a factory reset. However it is irritating having to do it every time. The weird thing it never used to happen before with the tower Im using. Is potentially out of date drivers a problem? Thanks.

  Read the article

• Merely chainloading an Acer Recovery Partition deleted all data

  - by WindowsEscapist

  I was starting a backup of Acer's factory restore partition located inside of an extended partition to determine whether or not it still worked. I clicked "take no action" once I saw that it had, in fact, successfully started up. However, when I rebooted, I got an "error: no such partition" and was dropped to a GRUB recovery prompt. Upon further investigation, I discovered that all partitions inside the extended partition were gone except for the recovery partition! What happened? How can I fix this? testdisk doesn't find the deleted partitions!

  Read the article

• Import Google Voice Contacts Into iPhone

  - by Nalandial

  What I'd like to do is have my Google Voice contacts available on my iPhone, not the other way around. I recently had to restore the phone to factory defaults and it's a pain to manually enter all them all. When I make a new GMail e-mail account on my iPhone it won't let me import contacts from my Google account, but even if it did I don't want every single contact in my phone. Google for some reason adds every single person I've ever sent e-mails to into my contacts list, which as you can imagine is quite a large list by now. Does anyone have any suggestions for how to do this?

  Read the article

• Windows 8 - Synaptics driver - Mouse keeps freezing

  - by KickAss

  I have Win-8 Pro installed on my Dell XPS. This has Synaptic PS/2 Port TouchPad. As I upgraded the Laptop from Win7 to Win8 all my factory Mouse software (along with other preinstalled software) was all deleted. So for the mouse, I installed Windows 8/7/XP/Vista 64/32-bit Edition v16.3.15.1. Problem - every few seconds (or minutes at times), the mouse freezes. Windows is still working, it's just the mouse. I have to wait 5-15 seconds before the mouse works again. I thought this was because the Synaptic Driver I am installing is not Win-8 compatible but this is not the case. It seems the mouse freezes when Windows is working, loading or opening new programs/windows. I have the same problem in my other Laptop which has upgraded Win8 pro. This is a Dell Studio. What's causing this?

  Read the article

• Monitor weirdness/flickering with new Viao PCG-3112L

  - by Rosarch

  I have a Sony VAIO PCG-3112L running Windows 7. It worked fine on one monitor, but now I'm using it with a 2 year old LG Flatron W2252TQ-TF. The colors are sorta off (although that might just be the monitor), but more annoyingly there are many horizontal flickering lines. It's more noticeable on non-white backgrounds. I tried rebooting the monitor, and reseting it to factory settings, but that didn't solve the issue. What could be the cause of this? The monitor works fine with an Asus netbook. I have checked that both ends of the VGA cable are plugged in between the Vaio and the monitor.

  Read the article

• PC boots on then off & 30 sec. later on again, it wiil shut off on itself mostly in idle or just unexpecticly

  - by Jody

  This problem started w/ my sons desktop, it would just shut off after a bit of work or stay on for a long time & to get it to unfreeze is to cold boot it, i put a new HDD in & I still have the same issue, RAM is good power supply fan is moving quite as well as all the rest of the fans it has stayed fairly dust free, i'm at a loss ,I have defaulted all the factory settings changed battery & ungraded to a new OS. I still have the same problem. the power light stays on after it has shut down & when upon starting it goes straight to safe mode option page, I start in last good config. reboots again takes 30 sec. to boot & will work again for a while, the only other thing I haven't tried was a graphic card replace, i'm onboard video now & have been.

  Read the article

• Broken web interface in WRT54G router

  - by asmo

  I flashed my WRT54G (v3) from a custom firmware to the lastest Linksys one (v4.21.1) Now the internet/LAN works fine, but the web interface (http://192.168.1.1/) shows broken pages. I tried to manually navigating to the firmware upgrade page (by entering its URL), but it is broken too and not working. I tried a 30/30/30 reset twice, but the broken web interface still shows up. I tried to flash using the tftp2.exe application, which told me that the router didn't respond to the request. I tried to flash using the Windows commandline TFTP protocol, but I don't know how to supply a password on this prococol. (there is a factory default password ("admin") which I can't remove since the web interface is broken)

  Read the article

• Motherboard rejects identical hard drive, one works the other doesn't

  - by Payson Welch

  I have an interesting situation. I have a Dell XS23-SB server that has four blades in it. The blades use Supermicro X7DWT motherboards, and interface with the sata drives through a backplane. I took two identical drives from a raid 0 enclosure that came from the factory (GDrive), one works on all four servers, the other does not. I verified that they both work by plugging them into a hard drive cradle. This behavior can be repeated with other drives, some drives work and some don't. However when i test them, they ALL work on my PC. What could cause this?

  Read the article

• How to split audio into multiple channels from optical S/PDIF or 1/8"?

  - by Josh M.

  I have a motherboard which has an optical S/PDIF output or 1/8". I'd like to "split" that signal into the appropriate channels so that I can then connect that to the wires behind my car's headunit which, in turn, run to the amp. The factory Bose amp just takes a single connector with a million wires running out of it, so that's why I would need to separate the signal into separate channels. On the other end there are four RCA connectors: front left, front right, rear left, rear right. The sub-woofer signal does not require an additional connection. Edit: Revised to include S/PDIF or 1/8".

  Read the article

• Grub os-probe showing deleted Windows installation

  - by Sanjay

  I recently purchased a Dell Vostro notebook with Ubuntu Netbook edition 10.04 pre-installed. I tried adding a partition and installed Windows XP but it didn't work out due to too many partitions in the system already. Now I have restored the laptop to factory setting using Dell Utility partition and the Windows partition is completely deleted, however my grub2 still shows Windows on /dev/sda2 sudo os-probe Microsoft Windows XP Professional (on /dev/sda2) Any ideas how to remove it from grub? I know I can remove /etc/grub.d/30_os-probe but I am more interested in why os-probe is showing the deleted partition.

  Read the article

• Emulating CP/M under Linux

  - by gh403

  I need to be able to run a very old piece of software -- the HI-TECH z80 C Compiler for CP/M. It has been released as freeware by HI-TECH. Alas, it only runs on CP/M. After a lot of Googling, I found a page of utilities for UZIX. One of those utilities is a script to abstract away the emulation of a CP/M machine, thus allowing you to use the compiler as you would any other UNIX program. The problem with this script is that it depends on their own CP/M emulator, which unfortunately will not compile on a modern (x64) system. My question: is there a usable CP/M emulator for Linux that could be used in a similar fashion? Specifically, I need to be able to somehow have it access files from the host system, a la DOSBox. I'm willing to rewrite a script (I don't have to re-use the UZIX one); I just need an emulator. Thanks for any help!

  Read the article

• What's the difference between find and findstr commands in Windows?

  - by Prashant Bhate

  In Windows, what are the differences between find and findstr commands? Both seems to search text in files: find c:\>find /? Searches for a text string in a file or files. FIND [/V] [/C] [/N] [/I] [/OFF[LINE]] "string" [[drive:][path]filename[ ...]] /V Displays all lines NOT containing the specified string. /C Displays only the count of lines containing the string. /N Displays line numbers with the displayed lines. /I Ignores the case of characters when searching for the string. /OFF[LINE] Do not skip files with offline attribute set. "string" Specifies the text string to find. [drive:][path]filename Specifies a file or files to search. If a path is not specified, FIND searches the text typed at the prompt or piped from another command. findstr c:\>findstr /? Searches for strings in files. FINDSTR [/B] [/E] [/L] [/R] [/S] [/I] [/X] [/V] [/N] [/M] [/O] [/P] [/F:file] [/C:string] [/G:file] [/D:dir list] [/A:color attributes] [/OFF[LINE]] strings [[drive:][path]filename[ ...]] /B Matches pattern if at the beginning of a line. /E Matches pattern if at the end of a line. /L Uses search strings literally. /R Uses search strings as regular expressions. /S Searches for matching files in the current directory and all subdirectories. /I Specifies that the search is not to be case-sensitive. /X Prints lines that match exactly. /V Prints only lines that do not contain a match. /N Prints the line number before each line that matches. /M Prints only the filename if a file contains a match. /O Prints character offset before each matching line. /P Skip files with non-printable characters. /OFF[LINE] Do not skip files with offline attribute set. /A:attr Specifies color attribute with two hex digits. See "color /?" /F:file Reads file list from the specified file(/ stands for console). /C:string Uses specified string as a literal search string. /G:file Gets search strings from the specified file(/ stands for console). /D:dir Search a semicolon delimited list of directories strings Text to be searched for. [drive:][path]filename Specifies a file or files to search. Use spaces to separate multiple search strings unless the argument is prefixed with /C. For example, 'FINDSTR "hello there" x.y' searches for "hello" or "there" in file x.y. 'FINDSTR /C:"hello there" x.y' searches for "hello there" in file x.y. Regular expression quick reference: . Wildcard: any character * Repeat: zero or more occurances of previous character or class ^ Line position: beginning of line $ Line position: end of line [class] Character class: any one character in set [^class] Inverse class: any one character not in set [x-y] Range: any characters within the specified range \x Escape: literal use of metacharacter x \<xyz Word position: beginning of word xyz\> Word position: end of word For full information on FINDSTR regular expressions refer to the online Command Reference.

  Read the article

• How can I fix an inconsistent NTFS file system without Windows?

  - by Demetri

  I have a Dell laptop that came with Windows from the factory. Since then, I have installed Linux and replaced the hard drive with an SSD. The NTFS partition is inconsistent (a result of bad sectors on the HDD) and needs to be fixed, but I cannot boot into Windows to run chkdsk. How do I fix this problem? Until I do, I cannot move my NTFS partition to expand space on my root filesystem, which is critically low. EDIT: All of my partitions were cloned from my dying HDD to my SSD via Clonezilla. There are no bad sectors on the SSD, but the NTFS partition is still in an inconsistent state.

  Read the article

• Can't find a wireless access point's IP address after changing router IP/LAN settings

  - by flagg19

  I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

  Read the article

• HP Officejet 7410 AIO: Scanning/copying output is a solid black field

  - by William

  I recently tried to breathe some life back into an old Officejet 7410 for my parents. The printing is fine, but the scanning and the copying respectively produce images and copies that are mostly solid black, except for the first inch or so from the top of the original page. At first I thought this was a bulb problem, so I replaced it. Unfortunately, the problematic behavior is still there. I've tried resetting to factory defaults. Still no improvement. I don't think this is related to my OS or drivers, since the copying is also affected even when the connected computer is powered off. So... my question(s): What is the cause of this bad behavior? Given that, can my Officejet be repaired? If so, how? Thanks in advance.

  Read the article

• hp laserjet 4200 madness

  - by C-dizzle

  I have an HP LaserJet 4200 printer that is acting really weird. I can print from internet just fine, no problem... but when I try to print from a document used in microsoft word, for example, I always get "Manual Feed Tray 1". I have racked my brain on this and cannot get it figured out. It's a networked printer and only an administrator account can make changes to it, I have also reset the printer back to factory settings, uninstalled and reinstalled onto the pc's and server it is connected to. Running out of hair since I'm pulling it all out... please help.

  Read the article

• Security considerations for my first eStore.

  - by Rohit

  I have a website through which I am going to sell few products. It is hosted on a simple shared-hosting and does not have SSL. On the products page, each product has a Buy Now button created from my PayPal Merchant account. PayPal recommends to use it's Button Factory to create secure buttons and save it inside PayPal itself. I have followed the same advice and the code of any button is secure and does not disclose any information on either a product or it's price. When the user clicks on a Buy Now button, he/she is taken to PayPal site where a page is opened in SSL for the user to fill in the credit card and shipping details. After a successful transaction, the control is passed back to my site. I want to know whether there is still any chance when security could be compromised.

  Read the article

• How to change hybrid disk to basic disk in windows 7?

  - by Marco

  I created a partition E and then deleted the partition. After that I extended my partition C (where OS was installed) to take the space. My partition C became hybrid drive. My hp notebook does not have DVD rom and the notebook only came with an recovery image (I also have a paragon disc image). My computer has some problems now and I want to recover it by either the factory format or the paragon disc image. However, none of them works. I know it is because my disc has become hybrid disk. My question is how to fix the dynamic disk problem?

  Read the article

• Why does my win7 back ground and theme settings reset to default after every reboot ?

  - by JubJub

  I have the new ASUS G73. Everything is perfect, but for unknown reasons to me after customizing the background and theme colors, rebooting resets all these back to default (the theme that originally came with the laptop) Is there a way to stop this madness? Is there some kind of configuration reset app that runs on start up for ASUS computers? This is my first ASUS so I don't know what to expect with the factory bloatware. No, I don't feel like re-installing bare-bones windows just to get rid of the bloatware. Everything works fine except for this one little thing :( Sniff.

  Read the article

• Text on Cisco ASA console is garbled/missing letters

  - by Some Linux Nerd

  I've actually looked up a number of solutions for this problem and none of them work. There's this Cisco ASA 5505 that I'd like to use, that outputs mildly garbled text with missing characters. I did some googling and found that the most likely problem is a bad baud rate, so I tried all the baud rates, 7N1, 8N2... basically every possibility minicom had. Then I figured (since I can type ok, just not read) that if I factory reset it that it would fix whatever is set wrong with the terminal. That didn't work either. This usb-db9 adapter and console cable work fine on the catalyst switch in our office. My serial settings are 9600 8N1 with no flow control. Anyone know how to fix this? I have an example of the text on pastebin: http://pastebin.com/MAJF0mVU - it's just lots of "Dfaut cnfiuraionfil cotais 1enty." instead of "Default configuration blah blah"

  Read the article

• Lenovo tools for windows 7: can't re-enable wireless

  - by pcampbell

  Consider a netbook - Lenovo S10e with Windows 7 and the S10 Lenovo power management tools. Machine has factory BIOS. Fn+F5 is the key combo to toggle the wireless radio on/off. The tool allows the disabling fine; works as expected. The problem is that the re-enable doesn't work, or is confusing on how to re-enable. Previously tried without success: Fn-F5 Fn-Ctrl-F5 Fn-Shift-F5 Fn-Alt-F5 Here's the onscreen display: Question: How can you re-enable the wireless radio using the Function key on a Lenovo netbook?

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >