Search Results

Search found 19676 results on 788 pages for 'hardware interface'.

Page 201/788 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

  • Poor performance of single processor 32bit Windows XP xompared SMP in VBA+Excel

    - by Adam Ryczkowski
    Welcome! On many computers I experienced poor performance of 32 bit guests running on 64 bit Linux host (I used only the Debian family). At last I managed to collect benchmark data. I made the benchmark by running custom VBA macro, (which we use in our company) that generates 284 pages long Word document full of Excel Pie charts, tables and comments. The macro is run as a single task (excluding the standard services) on a set of identically configured Windows XP 32-bit systems. I measured the time (in sec.) needed to perform the test. The computer (i.e. my notebook Asus P53E) supports both VT-d extensions and native Windows XP. It has 2-core processor, each core is hyperthreaded, so in total we have 4 mostly independent execution units. I use the latest VirtualBox 4.2 and VMWare Workstation 9.0 for Linux, installed together on the same host (running Mint 13 Maya) but never run simultaneously. The results (in column Time) are no less accurate than ± 10% Here are the results (sorry for the format, but I couldn't find out a better solution for tables in SO): +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | Host software | # processor | Windows kernel | IO APIC | VT-x/AMD-V | 2D Video Accel | Time | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 0 | 1139 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 1 | 1 | 1050 | | VirtualBox | 1 | Advanced Configuration and Power Interface (ACPI) PC | 0 | 0 | 1 | 1644 | | VirtualBox | 4 | ACPI Multiprocessor PC | 1 | 1 | 1 | 6809 | | VMWare | 1 | ACPI Uniprocessor PC | | 1 | 1 | 1175 | | VMWare | 4 | ACPI Multiprocessor PC | | 1 | 1 | 3412 | | Native | 4 | ACPI Multiprocessor PC | | | | 1693 | | Native | 1 | Advanced Configuration and Power Interface (ACPI) PC | | | | 1170 | +---------------+-------------+------------------------------------------------------+---------+------------+----------------+------+ Here are the striking conclusions: Although I've read in the VirtualBox fora about abysmal performance with 32-bit guest on 64-bit host, VMWare also has problems compared to native run, still being twice faster(!) than VBox. Although VBA is inherently single-threaded, the Excel calculations, which take much more than a half of total computation time, supposedly aren't. So one would expect some speed gain when running on 2+ cores ("+" for hyperthreading). What we see is a speed loss. And quite big one too. For the VirtualBox the VT-d extension isn't a big deal. Can anyone shed some light on why the singlethreaded Windows kernel is so much faster than the SMP one?

    Read the article

  • CUPS in linux and printer

    - by yogesh
    How can I achieve the following behavior? CUPS Server communicate with hardware printer by using the "PostScript3" language and the LPD/LPR protocol to manage and transmit printing jobs. CUPS server must be configured to accept following file formats: PS, TXT, PDF, JPEG and PNG. This means only these files get printed and others should be blocked. I want to connect actual hardware printer using IPP from the linux machine.

    Read the article

  • Does more heat generation mean more wear and tear?

    - by Suhail Gupta
    I read that hardware generally used on PC is not optimized for running Linux. That is the reason the machine emits large amount of heat and doesn't give the battery back up , that we will get while working on windows. ~REF Does it also mean more wear and tear of the hardware (when using linux as compared when using windows ) ? Note : I have personally experienced large heat emission while working with Fedora 16 and Ubuntu 11.xx on my laptop.

    Read the article

  • Setup VPN network for PS3

    - by L Franco
    Getting informed on setting up a home network so i can use VPN on my PS3, i live in Mexico but want the programming available in the US. Getting a little confused as every sites gives you different options, both in hardware and software. specially on subjects like dd-wrt, dns or vpn options... i know there is no "best" setup, but are there any tried and true?? Options in hardware and software would be apreciated...

    Read the article

  • Media disconnected Acer Aspire Win 7 Starter

    - by RoadGlide
    Problem setting up wireless connection on my new ACER Netbook using Win 7 Starter. Works fine with LAN cable from NETGEAR WGT624V3 router with updated firmware. The NETGEAR does not see the ACER, but does see my XP Laptop. I'm also running a wireless, BlueRay DVD. When I run getmac I get hardware not pesent, my mac address, Hardware not present. Is there a switch that needs to be set?

    Read the article

  • Windows Server 2003 port forwarding

    - by Vitor Braga
    Using the "netsh interface portproxy" I added a port forwarding to a Windows Server 2k3. The command "netsh interface portproxy show all" shows the added forwarding. On the other hand, any client connecting to the incoming port will receive a "connection refused" message. netstat also doesn't show the incoming port as listening. The machine firewall is disabled. There is any other way to setup port forwarding on Windows or debugging tips?

    Read the article

  • Windows 8.1 and fingerprint readers

    - by Sevenate
    Is there any build in UI for that kind of hardware like it exist in Modern UI for WiFi, Bluetooth, Broadband mobile and other common settings or I'm forced to use separate software (besides the obvious drivers for hardware)? The thing is that I have build-in fingerprint reader in my laptop and I have installed all necessary official drivers for it (and it looks like they are working fine, btw). But I did not find any UI settings where I could change Sign-in option from password/picture password/pin to fingerprint.

    Read the article

  • How to Configure Source NAT (Private IP => Public IP Outbound)

    - by DavidScherer
    I'm running VMWare ESXi Free and have Zentyal SBS 3.2 running as a Gateway. I have 5 Public IPS (CIDR/29, let's call them 69.1.1.1 - 69.1.1.5) and currently Zentyal is bound to 69.1.1.1 as the Gateway, with the other 4 Public IPs set as Virtual Interfaces in Zentyal (wan2-wan5) I have machines sitting on the Private Network (10.34.251.x) that, when going Outbound (to Google for instance) should be seen by the Internet as an IP other than the Gateway (69.1.1.1), this is because our machines need to be able to communicate with 3rd party APIs that expect these requests to come from a specific IP. From what I could find, SNAT (Source NAT) in Zentyal is used to achieve this, but I'm not sure how to configure it and cannot find a specific piece of Documentation for it at Zentyal. I've tried setting this up a couple different ways, with no results and at this point I have no idea if I'm going about this completely wrong, or my lack of experience with networking and the associated terminology is preventing me from placing the correct values in the correct fields. I get the following form to set up "SNAT" rules in Zentyal: Perhaps someone can offer some guidance and definitions for the fields above? SNAT Address Is this the Public IP I want to masquerade? Outgoing Interface Should this by my External NIC (one connected to Public 'Net), or is it the "Private" interface? It sounds as though this should be the External interface as I want the traffic from the internal network sent Out over this Interface (using a different IP than normal, anyway) Source Is the the Source on the internal network (one of the private IPs?), a public IP I want to masquerade as, or something else entirely? Destination Is this a place on the Internet (eg, "Only do this for the Site Google.com"/IP) or am I allowing myself to become confused again? Service I'm assuming this allows me to restrict which services this rule will apply to, but is it for a service on the internal network or a service being accessed on the external network? If I can offer any further details or information to make what I'm trying to do more clear, I will happily do so. Honestly any kind of help here would be very appreciated. I'm not a NetOps or anything even close, I spend most of my day writing code and my entire "team" at this company consists of "me, myself, and I" so while I try to broaden my KB at every possible opportunity, I can only learn so much, so fast and I feel like with networking especially there's just so much, coupled with a learning curve for each solution that likes to (from my limited perspective) use slightly different terminology that what I'm used to (and I don't exactly have the necessary experience to cross reference this stuff with the stuff I already know in context).

    Read the article

  • What would cause the Graphic Equalizer in Windows Media Player 10 to be disabled/not available?

    - by creamcheese
    On XP, Windows Media Player 10 contains a Graphic Equalizer but I can't find any way to activate it. Could this be a codec issue or a hardware issue? I'm also not getting any sound at all from this computer but there are no apparent hardware device issues marked in Device Manager, nothing is muted, all volume levels are turned fully up (Windows Media Player and the Windows Volume Controller). Stumped!

    Read the article

  • NIC is receiving, but not transmitting at all?

    - by Shtééf
    I'm trying to fix a very strange problem remotely on a machine at a customer site. The machine is a Dell PowerEdge, I believe a 1950 (haven't verified, but the lspci output matches specs I found.) The machine has two similar NICs, identified as Broadcom Corporation NetXtreme II BCM5708 Gigabit Ethernet (rev 12) by lspci, and using the bnx2 driver. (I suspect these are on-board and on the same controller, which is what I'm accustomed to for this type of machine.) The primary interface eth0 works perfectly, and is in fact how I am ssh'd in. However, the secondary interface eth1 is not transmitting. I can see this in ifconfig output, for example, where the TX field is always 0. However, it is receiving, and tcpdump shows ARP requests coming from the ISP's gateway on the other side. The interface is physically connected to a Siemens BSTU4 modem, configured by the ISP. The link is properly set to 10MBps and full duplex, without negotation, as the ISP requested. A small /30 subnet is configured. For the sake of anonimity, let's say the machine is 3.3.3.2/30, and the ISP's gateway .1. The machine has no firewall settings whatsoever. Even running something like arping -I eth1 3.3.3.1, and running tcpdump alongside, shows no traffic whatsoever being transmitted on the interface. (But the other side keeps steadily sending ARP requests, and that is all that can be seen.) What could be causing this? Here's some output, anonymized, which may hopefully help: $ ethtool eth1 Settings for eth1: Supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Full Supports auto-negotiation: Yes Advertised link modes: Not reported Advertised auto-negotiation: No Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: off Supports Wake-on: d Wake-on: d Link detected: yes $ ip link show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:15:c5:xx:xx:xx brd ff:ff:ff:ff:ff:ff $ ip -4 addr show eth1 3: eth1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000 inet 3.3.3.2/30 brd 3.3.3.3 scope global eth1 $ ip -4 route show match 3.3.3.0/30 3.3.3.0/30 dev eth1 proto kernel scope link src 3.3.3.2 default via 10.0.0.5 dev eth0

    Read the article

  • hybrid cable for QSFP to CX4 convertion

    - by John-ZFS
    here is a hybrid cable for QSFP to CX4. Will this fit SFP+ ports? Deeply confused by standards and struck in a situation with wrong hardware selection!Personally have not seen the ports/hardware and hence the obviously stupid question! thanks for stopping by and bearing with me. http://www.cablesondemand.com/pcategory/72/category/QSFP+-+CX4/URvars/Catalog/Library/InfoManage/QSFP_TO_CX4_COPPER_CABLES.htm

    Read the article

  • Assign a secondary IP address to a Windows machine using DHCP

    - by IndigoFire
    Is it possible to configure dhcpd (on a Linux box) to assign a Windows PC 2 separate IP configurations? Right now I've configured the two IP addresses manually and it does exactly what's needed, but I can't figure out how to achieve the same thing with DHCP. For example, is it possible to set up a virtual interface that piggy-backs onto the first interface and gets its own configuration? Alternatively, is it possible to run a script upon getting IP values from DHCP that would then be able to configure the secondary IP?

    Read the article

  • Can someone explain what causes extra heat in a CPU

    - by BlueTrin
    I have a hardware question about CPU and chips in general: what is causing the extra heat when CPUs are busy doing computations ? I thought that the CPUs would have a way to throttle themselves when they are not busy but it seems that only applies to some mobile CPUs, so my question is how do CPUs manage to generate less heats when performing less computations and what causes the heat in the hardware when the workload increases ?

    Read the article

  • Win7 - Chrome: Accelerated rasterization not enabled/not supported

    - by Wozzie
    Win 7 Pro SP1 x64 EVGA Geforce GTX 670 FTW 2gb Geforce Driver: 320.49, it did happen with the previous version of the driver as well Chrome Version 28.0.1500.52 beta-m DirectX: 11 I was looking in chrome://gpu which told me that "Rasterization: Software only. Hardware acceleration disabled." and further down "Accelerated rasterization has not been enabled or is not supported by the current system." Is there a way to enable hardware acceleration?

    Read the article

  • How to get a Cisco VPN 3000 config as text?

    - by Steven
    We would like to get a Cisco VPN device 3000 series configuration as a text file to look at the actual configuration, but apparently the interface is not a CLI but a graphical interface or menu driven. Is there a way to get access to the complete config as a text? And to copy and paste it to a text file?

    Read the article

  • DD-WRT - Where's the best place to get a LinkSys WRT54G V1.0?

    - by Giffyguy
    Looking for the initial release of the LinkSys WRT54G, not V1.1 or V2.0 or anything like that. If it comes with DD-WRT pre-installed, even better. That being said, I suppose a side question would be whether SU recommends different hardware. After all, DD-WRT may have been originally built for the WRT54G and the WRT54Gv1.0 may have better hardware than any of the successive models, but it's still fairly dated. Are there newer routers that are more stable or performant with DD-WRT?

    Read the article

  • Two DHCP Servers, Block Clients for one of them?

    - by Rilindo
    I am building out a kickstart network that resides on a different VLAN uses its own DHCP server. For some reason, my kickstart clients kept getting assign IPs from my primary DHCP server. The way I have it set up is that I have a primary DHCP server on this router here: 192.168.15.1 Connected to that DHCP server is a switch with the IP of 192.168.15.2. My kickstart (Scientific Linux) server is connected to that switch on two ports: Port 2 - where the kickstart server communicates to the rest of the production network via eth0. The IP assigned to the server on that interface is 192.168.15.100 (on eth0). The details are: Interface: eth0 IP: 192.168.15.100 Netmask: 255.255.255.0 Gateway: 192.168.15.1 Port 7 - has it's own VLAN ID (along with port 8). The kickstart server is connected to that port with the IP of 172.16.15.100 (on eth1). Again, the details are: Interface: eth1 IP: 172.16.15.100 Netmask: 255.255.255.0 Gateway: none The kickstart server runs its own DHCP server and assigns them over the eth1. Most of the kick starts are built over the kickstart VLAN through port 8. To prevent the kickstart DHCP server from assigning addresses over the production network, I have the route setup like so: route add -host 255.255.255.255 dev eth1 At this point, the clients kept getting assign IPs from the 192.168.15.1 DHCP server. I need to figure out a way to block client requests from reaching that DHCP. Its should be noted that but I also build KVM hosts on the kickstart server as well, so I need those KVMs to have the ability to get DHCP requests from the 192.168.15.1 DHCP server via the bridge network once I finish resolved this particular problem. (Currently, they communicate via NAT). So what would be done to resolve this? Through iptables or some sort of routing I need to put in? I tried to limited to requests via IPtables on that interface, allowing DHCP requests for 172.16.15.x network: -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 69 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 68 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p udp -m udp --dport 67 -j ACCEPT -A INPUT -i eth1 -s 172.16.15.0/24 -p tcp -m tcp --dport 67 -j ACCEPT And rejects assignments on eth1 from 192.168.15.x network: -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 69 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 68 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p udp -m udp --dport 67 -j REJECT -A FORWARD -o eth1 -s 192.168.15.0/24 -p tcp -m tcp --dport 67 -j REJECT Nope. :(

    Read the article

  • How can virtualization be efficient?

    - by pestaa
    As I understand, the virtual machine and the guest OS doubles the amount of abstraction layers (that are computationally relevant) between the user interface and the pure power of the hardware. Some of the said abstraction layers are (emulated) hardware, drivers, IO interfaces, etc. Top-notch virtualization solutions like Xen probably eliminate a few of these complexities, but I still wonder how efficiency is achieved in these environments; and whether manageable cloud servers are really worth the performance price.

    Read the article

  • Status: 0xc00000e9

    - by Ryan Galloza
    When I start up windows normally it just freezes , I click "Launch Startup Repair" I get this: "Windows has encountered a problem communicating with a device connected to your computer. This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CD-ROM drive that is failing. Make sure any removable is properly connected and then restart your computer If you continue to receive this error message, contact the hardware manufacturer" How do I fix this problem?

    Read the article

  • What is the correct network configuration for a devStack VM (virtualbox)?

    - by Olivier
    Usually when I setup a new Ubuntu VM, i keep the eth0 in NAT mode to get the internet & I add a eth1 interface in HostOnly mode so that I can ssh. But using this devStack guide : Running a Cloud in a VM, it looks like it tried to use eth0 as the public interface (install got stuck because eth0 lost the network). I know an OpenStack setup usually requires two NICs, so I'm wondering what is the correct configuration for my VM.

    Read the article

  • Is the XP VMM a bottleneck on a multi core machine?

    - by JeffV
    I have a dual Xeon hex core machine running an IO intensive application. (WinXP 32) I am seeing a hardware driver (1/2 user mode, 1/2 kernel, streaming data) that is using 6k delta page faults per second. When other applications load or allocate large amounts of memory the driver's hardware buffer gets an underrun (application not feeding it fast enough). Could this be because the kernel is only using one core to service page fault interrupts?

    Read the article

  • Best way to "clone" my Windows Server 2008 R2?

    - by A.B. User
    I have a Windows Server 2008 R2 Machine with 1 physical hard drive. I have an exact copy of the hardware of it, which I intend to use a a redundant backup in case my server fails (hardware or software). I'd like to routinely "clone" my production server's hard drive, so that when it fails, I'll just swap it with the latest clone. Is this even possible? If it is, what would be the simplest way to do this?

    Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >