Search Results

Search found 22447 results on 898 pages for 'message bus'.

Page 201/898 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• Wireless does not work anymore after software update with Ubuntu 12.10 on a Dell Latitude E6230

  - by Andy

  I just installed Ubuntu 12.10 on my DELL Latitude E6230, on first boot wifi worked properly but when I updated the software it stopped working. I can't figure out the problem... The wireless network controller is a Broadcom Corporation BCM4313 802.11b/g/n Wireless Lan Controller (rev 01) "lshw -class network" gives, for the above controller: *-network UNCLAIMED description: Network controller product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:f7d00000-f7d03fff After reading the answer to another similar question, I edited the file NetworkManager.conf to make "managed=true", but that did not make any difference, it is as if the wireless adapter were not there. In the "Network" setting window, I only see "Wired" and "Network proxy". Wireless has just disappeared: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no and that's it! Nothing about the wireless controller... Any suggestions?

  Read the article

• Wifi problem in ubuntu using macbook pro when it restart

  - by Amro

  I was read that subject : http://ubuntuforums.org/showthread.php?t=2011756 and i follow it step by step in the page n 1 , then i was connect but after i restart my macbook again , i was lost the wifi connection.i dont know why or whats the problem exactly. every time I run this command: dmesg | grep -e b43 -e bcma I get this output: [ 2012.769684] bcma-pci-bridge 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 2012.769701] bcma-pci-bridge 0000:02:00.0: setting latency timer to 64 [ 2012.769775] bcma: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x25, class 0x0) [ 2012.769808] bcma: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x1D, class 0x0) [ 2012.769889] bcma: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x13, class 0x0) [ 2012.770175] bcma: PMU resource config unknown for device 0x4331 [ 2012.824527] bcma: Bus registered [ 2012.831744] b43-phy0: Broadcom 4331 WLAN found (core revision 29) [ 2013.371031] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07) and to get the connection again every time i must entery that code in the step of reload driver. How i can let the ubuntu see my wifi and wireless device automatically when i reboot my computer????

  Read the article

• Integrating Azure ServiceBus and SharePoint 2010

  - by Sahil Malik

  SharePoint 2010 Training: more information My new article is finally online. I had been waiting for this for a while. The thing is, AppFabric became .NET 4, and left SharePoint 2010 behind. But fear not, we have REST API. But that brings up interesting challenges of how we can integrate Azure Service Bus with SharePoint 2010 (yes 2010, not vNext – I’m not giving NDA information out you fool), the design patterns you can use, figuring out challenging issues like security, sessions, and just app design patterns instead. Well, I hope you like my next article, SharePoint Applied: Azure ServiceBus and SharePoint 2010 Enjoy! Read full article ....

  Read the article

• My ubuntuone is broken, what is the problem?

  - by user6962

  I am on 10.10 and u1sdtool seems to be completely broken. I reinstalled it, no change. I can add my PC to the account, but it is added twice(!) every time I tried. So I have my netbook and two times my PC in the account. The netbook with 10.04 has no problems. Below is the error msg I get when attempting to startup Ubuntu One on the command line. desktop:~$ u1sdtool --status Oops, an error ocurred: Traceback (most recent call last): Failure: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. desktop:~$ Starting it from the Me Menu has the same effect, the HDD will get really busy for a minute and then nothing happens, the client will not start. Nothing in the syslog or anywhere.

  Read the article

• How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

  - by M. Tibbits

  Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

  Read the article

• How to install Netgear N-300 UAB adapter WNA3100 on Ubuntu 12.04

  - by JacobusR

  After a fresh install of Ubuntu 12.04, the first thing I'm trying to do, is to setup my wireless adapter. I can see it using lsusb: beer@beer-linux:~$ lsusb ... Bus 002 Device 006: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] ... I have found a lot of dated instructions on the net and just wanted to know what the right way is to set it up on 12.04. I don't want to mess up a brand new install by tweaking things that don't need tweaking. According to most posts, you have to install the Windows drivers using the ndiswrapper package. Is this still the right way to go? If so, it would be great if someone could write down the steps to do this under 12.04

  Read the article

• Periodic clicking sound from PC speaker

  - by John J. Camilleri

  After an update some months ago, my laptop has begun making a low, repeated clicking sound every few seconds. It is not being generated through the regular sound system, as altering the volume and even muting the sound does not make any difference. My regular audio works fine, by the way, so I am guessing this is some sort of PC speaker, since I cannot hear the click when I listen through regular headphones. Strangely, when I open the sound settings dialog the click magically disappears. I don't need to change any settings; if I simply leave the dialog open in the background then the problem disappears. Any ideas what this could be? I am running regular Ubuntu 12.04, and this is the output from lspci -v | grep -A7 -i "audio": 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 02) Subsystem: Acer Incorporated [ALI] Device 0349 Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at 54200000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel Kernel modules: snd-hda-intel

  Read the article

• No HDMI sound output on Thinkpad X1

  - by nickf

  I'm having problems getting my sound to output via HDMI to my TV. When I go to Sound Settings, the HDMI device does not appear. ~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: PCH [HDA Intel PCH], device 0: CONEXANT Analog [CONEXANT Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 I don't know if the video information is helpful, but anyway: ~$ sudo lshw -C video *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:46 memory:d0000000-d03fffff memory:c0000000-cfffffff ioport:5000(size=64) Any suggestions for me?

  Read the article

• Oracle University Nuevos cursos (Week 12)

  - by swalker

  Oracle University ha publicado recientemenete las siguentes formaciones (o versiones) nuevos: Database Oracle Enterprise Manager Cloud Control 12c: Install & Upgrade (2 days) Using Oracle Enterprise Manager Cloud Control 12c Introduction to Big Data (1 day seminar) Introduction to Oracle NoSQL Database (1 day seminar) Oracle Database Administration I: Certification Exam Preparation Seminar (Training On Demand) Development Tools Oracle Database SQL: Certification Exam Preparation Seminar (Training On Demand) MySQL MySQL for Beginners (4 days) Fusion Middleware Oracle Service Bus 11g: System Admin, Design & Integrate Accelerated (5 days) Oracle WebLogic Server 11g: Administration Essentials (Training On Demand) Oracle Solaris Developing and Deploying Applications on Oracle Solaris 11 (3 days) Fusion Applications Fusion Applications: Installation and Administration (4 days) E-Business Suite R12.x Oracle E-Business Suite Essentials for Implementers (Training On Demand) R12.x Implement Oracle Workflow (Training On Demand) R12.x Oracle Applications System Administrator Fundamentals (Training On Demand) PeopleSoft PeopleSoft PeopleTools I Rel 8.50 (Training On Demand) Póngase en contacto con el equipo local de Oracle University para conocer las fechas y otros detalles de los cursos. Manténgase conectado a Oracle University: LinkedIn OracleMix Twitter Facebook Google+

  Read the article

• Hostapd to connect laptop to Android

  - by Kmegamind

  i am trying to set up my laptop as an access point for my Android to use WiFi, so i knew that ubuntu sets the network as Ad-Hoc which is not discoverable by android, So i tried the method explained here -which i found on many other websites- but when i run hostapd.conf this error appears : nl80211: Failed to set interface wlan0 into AP mode nl80211 driver initialization failed. ELOOP: remaining socket: sock=4 eloop_data=0x8e488f8 user_data=0x8e48ea0 handler=0x807c5e0 ELOOP: remaining socket: sock=6 eloop_data=0x8e4aca8 user_data=(nil) handler=0x8086770 this is how my hostapd.conf looks like : interface=wlan0 driver=nl80211 ssid=Any_SSID_name hw_mode=g channel=1 macaddr_acl=0 auth_algs=1 ignore_broadcast_ssid=0 wpa=2 wpa_passphrase=Any_password wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP and this is my wireless card info : description: Wireless interface product: BCM43225 802.11b/g/n vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:05:00.0 logical name: wlan0 version: 01 serial: 78:e4:00:73:51:f1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=brcmsmac driverversion=3.2.0-31-generic-pae firmware=N/A latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:f0300000-f0303fff

  Read the article

• Does not documenting code result in job security? [closed]

  - by Barry Brown

  Possible Duplicate: Should you write good documentation and clean code to increase the “Bus Factor”? I often ask young programmers why they are not documenting their code. Their responses, perhaps jokingly, frequently include "job security." I hear this from experienced professionals, too. And not just in programming; network engineers and system administrators widely subscribe to this belief. Can you really ensure job security by holding the details of your work in your head rather than on paper (or in files)? What's your experience?

  Read the article

• Bluetooth pairing works in 10.10 but not in 11.04

  - by Nathan Haines

  My laptop, a Compaq Presario V2000, has a built-in Bluetooth module that has worked well since at least Ubuntu 8.04 LTS. I use it to pair with headphones and a mouse. These both worked great in Ubuntu 10.10 (and still do with a live CD) but I cannot pair to any Bluetooth device in Ubuntu 11.04, even from a live CD. I can see the Bluetooth module in lspci and when I try to set up a new device from the Bluetooth indicator my computer detects all Bluetooth devices around me but pairing always fails. At the moment I'm most concerned with getting my Microsoft Wireless Notebook Presenter Mouse 8000 paired. Relevant output of lspci: Bus 003 Device 002: ID 03f0:011d Hewlett-Packard Integrated Bluetooth Module

  Read the article

• Oracle University Nouveaux cours (Week 12)

  - by swalker

  Parmi les nouveautés d’Oracle Université de ce mois-ci, vous trouverez : Database Oracle Enterprise Manager Cloud Control 12c: Install & Upgrade (2 days) Using Oracle Enterprise Manager Cloud Control 12c Introduction to Big Data (1 day seminar) Introduction to Oracle NoSQL Database (1 day seminar) Oracle Database Administration I: Certification Exam Preparation Seminar (Training On Demand) Development Tools Oracle Database SQL: Certification Exam Preparation Seminar (Training On Demand) MySQL MySQL for Beginners (4 days) Fusion Middleware Oracle Service Bus 11g: System Admin, Design & Integrate Accelerated (5 days) Oracle WebLogic Server 11g: Administration Essentials (Training On Demand) Oracle Solaris Developing and Deploying Applications on Oracle Solaris 11 (3 days) Fusion Applications Fusion Applications: Installation and Administration (4 days) E-Business Suite R12.x Oracle E-Business Suite Essentials for Implementers (Training On Demand) R12.x Implement Oracle Workflow (Training On Demand) R12.x Oracle Applications System Administrator Fundamentals (Training On Demand) PeopleSoft PeopleSoft PeopleTools I Rel 8.50 (Training On Demand) Contacter l’équipe locale d’Oracle University pour toute information et dates de cours. Restez connecté à Oracle University : LinkedIn OracleMix Twitter Facebook Google+

  Read the article

• RTL8192SU-based Wi-Fi adapter disconnects permanently

  - by leventov

  I've already tried all possible (http://ubuntuforums.org/showpost.php?p=10129571&postcount=43) solutions, no progress. I'm in despair. In Windows (on the same machine) this adapter works stably. Device: Trendnet TEW-649UB. System details: Ubuntu 11.10; leventov@leventov-ubuntu:~$ uname -a Linux leventov-ubuntu 3.0.0-12-generic #20-Ubuntu SMP Fri Oct 7 14:56:25 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux leventov@leventov-ubuntu:~$ lsusb ... Bus 002 Device 002: ID 0bda:8172 Realtek Semiconductor Corp. RTL8191S WLAN Adapter ... leventov@leventov-ubuntu:~$ dmesg | grep 8712 #current driver [ 8.146510] r8712u: module is from the staging directory, the quality is unknown, you have been warned. [ 8.147113] r8712u: DriverVersion: v7_0.20100831 [ 8.147124] r8712u: register rtl8712_netdev_ops to netdev_ops [ 8.147127] r8712u: USB_SPEED_HIGH with 4 endpoints [ 8.147478] r8712u: Boot from EFUSE: Autoload OK [ 8.551272] r8712u: CustomerID = 0x0000 [ 8.551275] r8712u: MAC Address from efuse = 00:14:d1:6c:52:19 [ 8.551625] usbcore: registered new interface driver r8712u [ 9.501351] r8712u: Loading firmware from "rtlwifi/rtl8712u.bin" [ 10.160471] r8712u: 1 RCR=0x153f00e [ 10.161241] r8712u: 2 RCR=0x553f00e leventov@leventov-ubuntu:~$ lsmod | grep 8712 r8712u 189049 0 t

  Read the article

• Can't activate "mirror display"

  - by Nemo Peeters

  I have Ubuntu 12.04 on a Dell latitude E6410, I have a problem when using the VGA output I always have dual monitor and can't switch on the "mirror display" toggle under systems setting/displays. It's rather annoying when having to do presentation with a video projector. the option "mirror display" is in light grey and I can"t tick the box. Thanks for those who might have an idea how to resolve this? update: driver is: Intel® Ironlake Mobile x86/MMX/SSE2 card something like this ? description: VGA compatible controller product: Core Processor Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 64 bits clock: 33MHz

  Read the article

• Right-Time Retail Part 2

  - by David Dorf

  This is part two of the three-part series. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Right-Time Integration Of course these real-time enabling technologies are only as good as the systems that utilize them, and it only takes one bottleneck to slow everyone else down. What good is an immediate stock-out notification if the supply chain can’t react until tomorrow? Since being formed in 2006, Oracle Retail has been not only adding more integrations between systems, but also modernizing integrations for appropriate speed. Notice I tossed in the word “appropriate.” Not everything needs to be real-time – again, we’re talking about Right-Time Retail. The speed of data capture, analysis, and execution must be synchronized or you’re wasting effort. Unfortunately, there isn’t an enterprise-wide dial that you can crank-up for your estate. You’ll need to improve things piecemeal, with people and processes as limiting factors while choosing the appropriate types of integrations. There are three integration styles we see in the retail industry. First is batch. I know, the word “batch” just sounds slow, but this pattern is less about velocity and more about volume. When there are large amounts of data to be moved, you’ll want to use batch processes. Our technology of choice here is Oracle Data Integrator (ODI), which provides a fast version of Extract-Transform-Load (ETL). Instead of the three-step process, the load and transform steps are combined to save time. ODI is a key technology for moving data into Retail Analytics where we can apply science. Performing analytics on each sale as it occurs doesn’t make any sense, so we batch up a statistically significant amount and submit all at once. The second style is fire-and-forget. For some types of data, we want the data to arrive ASAP but immediacy is not necessary. Speed is less important than guaranteed delivery, so we use message-oriented middleware available in both Weblogic and the Oracle database. For example, Point-of-Service transactions are queued for delivery to Central Office at corporate. If the network is offline, those transactions remain in the queue and will be delivered when the network returns. Transactions cannot be lost and they must be delivered in order. (Ever tried processing a return before the sale?) To enhance the standard queues, we offer the Retail Integration Bus (RIB) to help the management and monitoring of fire-and-forget messaging in the enterprise. The third style is request-response and is most commonly implemented as Web services. This is a synchronous message where the sender waits for a response. In this situation, the volume of data is small, guaranteed delivery is not necessary, but speed is very important. Examples include the website checking inventory, a price lookup, or processing a credit card authorization. The Oracle Service Bus (OSB) typically handles the routing of such messages, and we’ve enhanced its abilities with the Retail Service Backbone (RSB). To better understand these integration patterns and where they apply within the retail enterprise, we’re providing the Retail Reference Library (RRL) at no charge to Oracle Retail customers. The library is composed of a large number of industry business processes, including those necessary to support Commerce Anywhere, as well as detailed architectural diagrams. These diagrams allow implementers to understand the systems involved in integrations and the specific data payloads. Furthermore, with our upcoming release we’ll be providing a new tool called the Retail Integration Console (RIC) that allows IT to monitor and manage integrations from a single point. Using RIC, retailers can quickly discern where integration activity is occurring, volume statistics, average response times, and errors. The dashboards provide the ability to dive down into the architecture documentation to gather information all the way down to the specific payload. Retailers that want real-time integrations will also need real-time monitoring of those integrations to ensure service-level agreements are maintained. Part 3 looks at marketing.

  Read the article

• Oracle University New Courses (Week 12)

  - by swalker

  Oracle University released the following new (versions of) courses recently: Database Oracle Enterprise Manager Cloud Control 12c: Install & Upgrade (2 days) Using Oracle Enterprise Manager Cloud Control 12c Introduction to Big Data (1 day seminar) Introduction to Oracle NoSQL Database (1 day seminar) Oracle Database Administration I: Certification Exam Preparation Seminar (Training On Demand) Development Tools Oracle Database SQL: Certification Exam Preparation Seminar (Training On Demand) MySQL MySQL for Beginners (4 days) Fusion Middleware Oracle Service Bus 11g: System Admin, Design & Integrate Accelerated (5 days) Oracle WebLogic Server 11g: Administration Essentials (Training On Demand) Oracle Solaris Developing and Deploying Applications on Oracle Solaris 11 (3 days) Fusion Applications Fusion Applications: Installation and Administration (4 days) E-Business Suite R12.x Oracle E-Business Suite Essentials for Implementers (Training On Demand) R12.x Implement Oracle Workflow (Training On Demand) R12.x Oracle Applications System Administrator Fundamentals (Training On Demand) PeopleSoft PeopleSoft PeopleTools I Rel 8.50 (Training On Demand) Get in contact with your local Oracle University team for more details and course dates. Stay Connected to Oracle University: LinkedIn OracleMix Twitter Facebook Google+

  Read the article

• How do I get the Touchpad Settings working on a Dell XPS 13" Ultrabook?

  - by Dennis Wisnia

  Today I got an brand new Dell XPS 13 and I really like it. Wifi/Bluetooth/Brightness works very well. But only the Touchpad makes me insane. Okay, Multitouch is really nice and i love it on my Macbook but... i must click to click. How can I set up that is an "touch" to click? Its makes me insane. click, click, click.. Can I configure it? Update: I checked the proc/devices and got: I: Bus=0011 Vendor=0002 Product=0005 Version=0000 N: Name="ImPS/2 Generic Wheel Mouse" P: Phys=isa0060/serio1/input0 S: Sysfs=/devices/platform/i8042/serio1/input/input11 U: Uniq= H: Handlers=mouse0 event11 B: PROP=0 B: EV=7 B: KEY=70000 0 0 0 0 B: REL=103 Its really bad - and anyone have an Idea that Ubuntu thinks that is an Touchpad??

  Read the article

• Laptop in-built Web Cam stopped working HP Probook

  - by Dave A

  My laptop (HP Probook) webcam has always worked. When I upgraded to 13.10 it stopped working. No solution found then so gave up. Recently upgraded to 14.04 still not working so thought I would ask anyone again if a solution had been found. lsusb Bus 001 Device 004: ID 0c45:62c0 Microdia Sonix USB 2.0 Camera dmesg | grep uvcvideo` [ 765.466575] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (0c45:62c0) [ 765.467305] uvcvideo: UVC non compliance - GET_DEF(PROBE) not supported. Enabling workaround. [ 765.467954] uvcvideo: Failed to query (129) UVC probe control : -32 (exp. 26). [ 765.467960] uvcvideo: Failed to initialize the device (-5). [ 765.468022] usbcore: registered new interface driver uvcvideo Tried searching everywhere but there does not appear to be any clear solution to the driver issue - very weird as my camera is listed as supported by uvcvideo and it has always worked.

  Read the article

• Oracle OpenWorld Update -- Highly Available WebLogic Messaging Architectures: Sharing a Customer Experience with Comcast

  - by Ruma Sanyal

  This session will describe a Comcast’s hands-on  experience using WebLogic JMS as their high-performance enterprise messaging system including high availability, and disaster recovery capabilities as Comcast is rolling out a cross-site active-active message bus. In the session, we will cover the following: Key capabilities in WebLogic JMS that enabled Comcast to design such an architecture Details of the architecture put in place Details about application design needed to make all of this successful Failover and fail back processes The results from this new architecture are higher availability, better performance, more flexibility, and reduced costs through better utilization of hardware and improved manageability. For more information about this and other WebLogic sessions, review the Oracle WebLogic Focus On document here. Details: Tuesday, Oct 2, 5-6pm, Moscone South Room 306

  Read the article

• How Byte loading/storing is implemented By the CPU?

  - by AlexDan

  I know that in 32bit machine, cpu read from memory 32bits at a time. since the registers in this case is 32bit in size too, I can understand how this works. What I don't understand is how the cpu implement load instructions of 1 byte. does it load the whole word where the single byte is located to the register, then perform some kind of "byte shifting", or does the cpu can load a single byte, in this case when does the byte masking happen, is it until the byte got loaded in the register, or it happen when byte is send through the data bus ? P.S. The cpu Im using is MIPS, the instructions Im talking about are: lb or lbu

  Read the article

• Graphic issue on intel945 chipset

  - by peeyush tiwari

  I used Intrepid(8.10) and my graphics used to work fine with compiz effects and all(on better resolution than 1024x768).Now I have upgraded to Precise(12.04)but I use gnome classic(with compiz effects)as my desktop but the compiz effects seem not to work, only unity 2D works. When I ran lshw -c video it gives: *-display UNCLAIMED description: VGA compatible controller product: 82945G/GZ Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 02 width: 32 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list configuration: latency=0 resources: memory:fea80000-feafffff ioport:dc00(size=8) memory:e0000000-efffffff memory:fea40000-fea7ffff Sysinfo shows: Display Resolution 1024x768 pixels OpenGL Renderer Gallium 0.4 on llvmpipe(LLVM 0x300) X11 Vendor The X.Org Foundation On SystemSettings: Memory 993.3 MiB Processor Intel® Pentium(R) 4 CPU 2.40GHz Graphics VESA: Intel(r) 82945G Chipset Family Graphics OS type 32-bit glxgears output comes to be around 100fps which used to be around 900fps in Intrepid

  Read the article

• Can't mount data DVD using 12.04

  - by dash2

  I cannot mount a data DVD using Ubuntu 12.04. I can read the DVD using a different OS, so the DVD is not the problem. I can read other CDs using Ubuntu. The error I get is: $ sudo mount /dev/dvd /cdrom mount: no medium found on /dev/sr0 The relevant output from lshw is: *-cdrom description: DVD reader product: DVD/CDRW UJDA775 vendor: MATSHITA physical id: 0.0.0 bus info: scsi@4:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/sr0 version: CB03 capabilities: removable audio cd-r cd-rw dvd configuration: ansiversion=5 status=nodisc I have installed ubuntu-restricted-extras and run /usr/share/doc/libdvdread4/install-css.sh.

  Read the article

• My smtp server is spammed?

  - by Milos

  I have a server and the postfix client on it. Since several days, I noticed a lot of processes running there. When checked, there are a lot of emails sent. Here is an example from the mail log: Aug 18 11:54:56 mem postfix/smtpd[9963]: connect from dslb-188-096-082-167.188.096.pools.vodafone-ip.de[188.96.82.167] Aug 18 11:54:56 mem postfix/smtpd[9301]: connect from unknown[186.113.45.4] Aug 18 11:54:56 mem postfix/smtpd[9963]: 525E7114012D: client=dslb-188-096-082-167.188.096.pools.vodafone-ip.de[188.96.82.167] Aug 18 11:54:56 mem postfix/cleanup[9970]: 525E7114012D: message-id=<B55835C9027BFA9D16CCBB556DB2F48BB82DF004000480BA-db0c3ce8aa74446411898d0d2feb3001@email.filmforthoughtinc.com> Aug 18 11:54:56 mem postfix/qmgr[2581]: 525E7114012D: from=<[email protected]>, size=10702, nrcpt=1 (queue active) Aug 18 11:54:56 mem postfix/smtpd[9301]: EC52711401DC: client=unknown[186.113.45.4] Aug 18 11:54:57 mem postfix/smtpd[9963]: disconnect from dslb-188-096-082-167.188.096.pools.vodafone-ip.de[188.96.82.167] Aug 18 11:54:57 mem postfix/cleanup[8597]: EC52711401DC: message-id=<4C905D97606B436FE50C6F738DE014D9D84F2185BA815D81-1a4dbe6fc2bfcc8183f5faf901cfa15e@email.manguerasespecializadas.com> Aug 18 11:54:57 mem postfix/smtp[9971]: 525E7114012D: to=<[email protected]>, relay=mail.mdpi.com[209.237.236.228]:25, delay=1.2, delays=0.55/0/0.45/0.16, dsn=5.1.1, status=bounced (host mail.mdpi.com[209.237.236.228] said: 550 5.1.1 <[email protected]>: Recipient address rejected: mdpi.com (in reply to RCPT TO command)) Aug 18 11:54:57 mem postfix/cleanup[10067]: 8B1E11140268: message-id=<[email protected]> Aug 18 11:54:57 mem postfix/bounce[10001]: 525E7114012D: sender non-delivery notification: 8B1E11140268 Aug 18 11:54:57 mem postfix/qmgr[2581]: 8B1E11140268: from=<>, size=12693, nrcpt=1 (queue active) Aug 18 11:54:57 mem postfix/qmgr[2581]: 525E7114012D: removed Aug 18 11:54:57 mem postfix/qmgr[2581]: EC52711401DC: from=<[email protected]>, size=10978, nrcpt=1 (queue active) Aug 18 11:54:57 mem postfix/smtp[10013]: connect to aspmx.l.google.com[2607:f8b0:400d:c03::1b]:25: Network is unreachable Aug 18 11:54:57 mem postfix/smtpd[9301]: disconnect from unknown[186.113.45.4] Aug 18 11:54:58 mem postfix/smtp[10013]: 8B1E11140268: to=<[email protected]>, relay=aspmx.l.google.com[74.125.22.26]:25, delay=0.5, delays=0.06/0/0.28/0.16, dsn=5.1.1, status=bounced (host aspmx.l.google.com[74.125.22.26] said: 550-5.1.1 The email account that you tried to reach does not exist. Please try 550-5.1.1 double-checking the recipient's email address for typos or 550-5.1.1 unnecessary spaces. Learn more at 550 5.1.1 http://support.google.com/mail/bin/answer.py?answer=6596 l7si24621420qad.26 - gsmtp (in reply to RCPT TO command)) Aug 18 11:54:58 mem postfix/qmgr[2581]: 8B1E11140268: removed Aug 18 11:54:58 mem postfix/smtp[9971]: EC52711401DC: to=<[email protected]>, relay=mail.mdpi.com[209.237.236.228]:25, delay=1.2, delays=0.66/0/0.44/0.12, dsn=5.1.1, status=bounced (host mail.mdpi.com[209.237.236.228] said: 550 5.1.1 <[email protected]>: Recipient address rejected: mdpi.com (in reply to RCPT TO command)) Aug 18 11:54:58 mem postfix/cleanup[9970]: 414361140254: message-id=<[email protected]> Aug 18 11:54:58 mem postfix/bounce[10001]: EC52711401DC: sender non-delivery notification: 414361140254 Aug 18 11:54:58 mem postfix/qmgr[2581]: 414361140254: from=<>, size=13057, nrcpt=1 (queue active) Aug 18 11:54:58 mem postfix/qmgr[2581]: EC52711401DC: removed Aug 18 11:55:01 mem postfix/smtp[10002]: 414361140254: to=<[email protected]>, relay=manguerasespecializadas.com[99.198.96.210]:25, delay=2.9, delays=0.04/0/2.1/0.84, dsn=2.0.0, status=sent (250 OK id=1XJPGs-0007BE-OI) Aug 18 11:55:01 mem postfix/qmgr[2581]: 414361140254: removed IS my server attacked, spammed? How to check that? Thank you.

  Read the article

• OSB, Service Callouts and OQL - Part 1

  - by Sabha

  Oracle Fusion Middleware customers use Oracle Service Bus (OSB) for virtualizing Service endpoints and implementing stateless service orchestrations. Behind the performance and speed of OSB, there are a couple of key design implementations that can affect application performance and behavior under heavy load. One of the heavily used feature in OSB is the Service Callout pipeline action for message enrichment and invoking multiple services as part of one single orchestration. Overuse of this feature, without understanding its internal implementation, can lead to serious problems. This post will delve into OSB internals, the problem associated with usage of Service Callout under high loads, diagnosing it via thread dump and heap dump analysis using tools like ThreadLogic and OQL (Object Query Language) and resolving it. The first section in the series will mainly cover the threading model used internally by OSB for implementing Route Vs. Service Callouts. Please refer to the blog post for more details. 

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >