Search Results

Search found 19114 results on 765 pages for 'python requests'.

Page 201/765 | < Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >

• Issuing multiple requests using HTTP/1.1 Pipelining

  - by Robert S. Barnes

  When using HTTP/1.1 Pipelining what does the standard say about issuing multiple requests without waiting for each request to complete? What do servers do in practice? I ask because I once tried writing a client which would issue a batch of GET requests for multiple files and remember getting errors. I wasn't sure if it was due to me incorrectly issuing the GET's or needing to wait for each individual request to finish before issuing the next GET.

  Read the article

• Forward DB requests after a DB move in SQL Server

  - by Nissan Fan

  I've moved database from one SQL Server instance on a machine to another machine completely. Is there any way to forward requests to the new server automatically so it doesn't require client config changes? Keep in mind it's only one DB out of many on the original server so I can't just forward all requests.

  Read the article

• ProxyPass or intercept web requests .NET

  - by JerryO

  I have got a .NET winform application that uses a Web Mapping Service that is password protected. Unfortunately I cannot attach a username and password to requests, ( the request are generated from a GIS mapcontrol) I can think of two ways around it Intercept all web requests from my .NET app and add a username/password Set up an Apache webserver and use proxypass to pass along my request adding a username/password Does anyone know how to do either of these?

  Read the article

• "Proxying" HTTP requests

  - by Richard

  Hi all, I have some software which runs as a black box, I have no access to it. This software makes HTTP requests. What I want to do is intercept these requests, forward them on, catch the response, do something with it, before passing the response back to the software. Can this be done? What's the best method? Thanks

  Read the article

• Multiple requests to server question

  - by embedded

  I have a DB with user accounts information. I've scheduled a CRON job which updates the DB with every new user data it fetches from their accounts. I was thinking that this may cause a problem since all requests are coming from the same IP address and the server may block requests from that IP address. Is this the case? If so, how do I avoid being banned? should I be using a proxy? Thanks

  Read the article

• pyscripter Rpyc error

  - by jf328

  pyscripter 2.5.3.0 x64, python 2.7.7 anaconda 2.0.1, windows 7 I was using pyscripter and EPD python happily in 32 bit, no problem. Just changed to 64 bit anaconda version and re-installed everything but now pyscripter cannot import rpyc -- it runs with internal engine (no anaconda), but no such error in pure python. Thanks very much! btw, there is a similar SO post few years ago, but the answer there does not work. *** Python 2.7.3 (default, Apr 10 2012, 23:24:47) [MSC v.1500 64 bit (AMD64)] on win32. *** Internal Python engine is active *** *** Internal Python engine is active *** >>> import rpyc Traceback (most recent call last): File "<interactive input>", line 1, in <module> File "C:\Anaconda\lib\site-packages\rpyc\__init__.py", line 44, in <module> from rpyc.core import (SocketStream, TunneledSocketStream, PipeStream, Channel, File "C:\Anaconda\lib\site-packages\rpyc\core\__init__.py", line 1, in <module> from rpyc.core.stream import SocketStream, TunneledSocketStream, PipeStream File "C:\Anaconda\lib\site-packages\rpyc\core\stream.py", line 7, in <module> import socket File "C:\Anaconda\Lib\socket.py", line 47, in <module> import _socket ImportError: DLL load failed: The specified procedure could not be found. >>> C:\research>python Python 2.7.7 |Anaconda 2.0.1 (64-bit)| (default, Jun 11 2014, 10:40:02) [MSC v.1500 64bit (AMD64)] on win32 Type "help", "copyright", "credits" or "license" for more information. Anaconda is brought to you by Continuum Analytics. Please check out: http://continuum.io/thanks and https://binstar.org >>> import rpyc >>>

  Read the article

• Has Twisted changed its dependencies?

  - by cdecker

  Hi all, I'm currently working on a Python/Twisted project which is to be distributed and tested on Planetlab. For some reason my code was working on friday and now that I wanted to test a minor change it refuses to work at all: Traceback (most recent call last): File "acn_a4/src/node.py", line 6, in <module> from twisted.internet.protocol import DatagramProtocol File "/usr/lib/python2.5/site-packages/Twisted-10.0.0-py2.5-linux-i686.egg/twisted/__init__.py", line 18, in <module> from twisted.python import compat File "/usr/lib/python2.5/site-packages/Twisted-10.0.0-py2.5-linux-i686.egg/twisted/python/compat.py", line 146, in <module> import operator File "/home/cdecker/dev/acn/acn_a4/src/operator.py", line 7, in <module> File "/home/cdecker/acn_a4/src/node.py", line 6, in <module> from twisted.internet.protocol import DatagramProtocol File "/usr/lib/python2.5/site-packages/Twisted-10.0.0-py2.5-linux-i686.egg/twisted/internet/protocol.py", line 20, in <module> from twisted.python import log, failure, components File "/usr/lib/python2.5/site-packages/Twisted-10.0.0-py2.5-linux-i686.egg/twisted/python/log.py", line 19, in <module> from twisted.python import util, context, reflect File "/usr/lib/python2.5/site-packages/Twisted-10.0.0-py2.5-linux-i686.egg/twisted/python/util.py", line 5, in <module> import os, sys, hmac, errno, new, inspect, warnings File "/usr/lib/python2.5/inspect.py", line 32, in <module> from operator import attrgetter ImportError: cannot import name attrgetter And since I'm pretty new to python I have no idea what could have caused this problem. All suggestions are welcome :-)

  Read the article

• python: what are efficient techniques to deal with deeply nested data in a flexible manner?

  - by AlexandreS

  My question is not about a specific code snippet but more general, so please bear with me: How should I organize the data I'm analyzing, and which tools should I use to manage it? I'm using python and numpy to analyse data. Because the python documentation indicates that dictionaries are very optimized in python, and also due to the fact that the data itself is very structured, I stored it in a deeply nested dictionary. Here is a skeleton of the dictionary: the position in the hierarchy defines the nature of the element, and each new line defines the contents of a key in the precedent level: [AS091209M02] [AS091209M01] [AS090901M06] ... [100113] [100211] [100128] [100121] [R16] [R17] [R03] [R15] [R05] [R04] [R07] ... [1263399103] ... [ImageSize] [FilePath] [Trials] [Depth] [Frames] [Responses] ... [N01] [N04] ... [Sequential] [Randomized] [Ch1] [Ch2] Edit: To explain a bit better my data set: [individual] ex: [AS091209M02] [imaging session (date string)] ex: [100113] [Region imaged] ex: [R16] [timestamp of file] ex [1263399103] [properties of file] ex: [Responses] [regions of interest in image ] ex [N01] [format of data] ex [Sequential] [channel of acquisition: this key indexes an array of values] ex [Ch1] The type of operations I perform is for instance to compute properties of the arrays (listed under Ch1, Ch2), pick up arrays to make a new collection, for instance analyze responses of N01 from region 16 (R16) of a given individual at different time points, etc. This structure works well for me and is very fast, as promised. I can analyze the full data set pretty quickly (and the dictionary is far too small to fill up my computer's ram : half a gig). My problem comes from the cumbersome manner in which I need to program the operations of the dictionary. I often have stretches of code that go like this: for mk in dic.keys(): for rgk in dic[mk].keys(): for nk in dic[mk][rgk].keys(): for ik in dic[mk][rgk][nk].keys(): for ek in dic[mk][rgk][nk][ik].keys(): #do something which is ugly, cumbersome, non reusable, and brittle (need to recode it for any variant of the dictionary). I tried using recursive functions, but apart from the simplest applications, I ran into some very nasty bugs and bizarre behaviors that caused a big waste of time (it does not help that I don't manage to debug with pdb in ipython when I'm dealing with deeply nested recursive functions). In the end the only recursive function I use regularly is the following: def dicExplorer(dic, depth = -1, stp = 0): '''prints the hierarchy of a dictionary. if depth not specified, will explore all the dictionary ''' if depth - stp == 0: return try : list_keys = dic.keys() except AttributeError: return stp += 1 for key in list_keys: else: print '+%s> [\'%s\']' %(stp * '---', key) dicExplorer(dic[key], depth, stp) I know I'm doing this wrong, because my code is long, noodly and non-reusable. I need to either use better techniques to flexibly manipulate the dictionaries, or to put the data in some database format (sqlite?). My problem is that since I'm (badly) self-taught in regards to programming, I lack practical experience and background knowledge to appreciate the options available. I'm ready to learn new tools (SQL, object oriented programming), whatever it takes to get the job done, but I am reluctant to invest my time and efforts into something that will be a dead end for my needs. So what are your suggestions to tackle this issue, and be able to code my tools in a more brief, flexible and re-usable manner?

  Read the article

• mod_cgi , mod_fastcgi, mod_scgi , mod_wsgi, mod_python, FLUP. I don't know how many more. what is mo

  - by claws

  I recently learnt Python. I liked it. I just wanted to use it for web development. This thought caused all the troubles. But I like these troubles :) Coming from PHP world where there is only one way standardized. I expected the same and searched for python & apache. http://stackoverflow.com/questions/449055/setting-up-python-on-windows-apache says Stay away from mod_python. One common misleading idea is that mod_python is like mod_php, but for python. That is not true. So what is equivalent of mod_php in python? I need little clarification on this one http://stackoverflow.com/questions/219110/how-python-web-frameworks-wsgi-and-cgi-fit-together CGI, FastCGI and SCGI are language agnostic. You can write CGI scripts in Perl, Python, C, bash, or even Assembly :). So, I guess mod_cgi , mod_fastcgi, mod_scgi are their corresponding apache modules. Right? WSGI is some kind of optimized/improved inshort an efficient version specifically designed for python language only. In order to use this mod_wsgi is a way to go. right? This leaves out mod_python. What is it then? Apache - mod_fastcgi - FLUP (via CGI protocol) - Django (via WSGI protocol) Flup is another way to run with wsgi for any webserver that can speak FCGI, SCGI or AJP What is FLUP? What is AJP? How did Django come in the picture? These questions raise quetions about PHP. How is it actually running? What technology is it using? mod_php & mod_python what are the differences? In future if I want to use Perl or Java then again will I have to get confused? Kindly can someone explain things clearly and give a Complete Picture.

  Read the article

• Why do I get a segmentation fault while redirecting sys.stdout to Tkinter.Text widget in Python?

  - by Brent Nash

  I'm in the process of building a GUI-based application with Python/Tkinter that builds on top of the existing Python bdb module. In this application, I want to silence all stdout/stderr from the console and redirect it to my GUI. To accomplish this purpose, I've written a specialized Tkinter.Text object (code at the end of the post). The basic idea is that when something is written to sys.stdout, it shows up as a line in the "Text" with the color black. If something is written to sys.stderr, it shows up as a line in the "Text" with the color red. As soon as something is written, the Text always scrolls down to view the most recent line. I'm using Python 2.6.1 at the moment. On Mac OS X 10.5, this seems to work great. I have had zero problems with it. On RedHat Enterprise Linux 5, however, I pretty reliably get a segmentation fault during the run of a script. The segmentation fault doesn't always occur in the same place, but it pretty much always occurs. If I comment out the sys.stdout= and sys.stderr= lines from my code, the segmentation faults seem to go away. I'm sure there are other ways around this that I will probably have to resort to, but can anyone see anything I'm doing blatantly wrong here that could be causing these segmentation faults? It's driving me nuts. Thanks! PS - I realize redirecting sys.stderr to the GUI might not be a great idea, but I still get segmentation faults even when I only redirect sys.stdout and not sys.stderr. I also realize that I'm allowing the Text to grow indefinitely at the moment. class ConsoleText(tk.Text): '''A Tkinter Text widget that provides a scrolling display of console stderr and stdout.''' class IORedirector(object): '''A general class for redirecting I/O to this Text widget.''' def __init__(self,text_area): self.text_area = text_area class StdoutRedirector(IORedirector): '''A class for redirecting stdout to this Text widget.''' def write(self,str): self.text_area.write(str,False) class StderrRedirector(IORedirector): '''A class for redirecting stderr to this Text widget.''' def write(self,str): self.text_area.write(str,True) def __init__(self, master=None, cnf={}, **kw): '''See the __init__ for Tkinter.Text for most of this stuff.''' tk.Text.__init__(self, master, cnf, **kw) self.started = False self.write_lock = threading.Lock() self.tag_configure('STDOUT',background='white',foreground='black') self.tag_configure('STDERR',background='white',foreground='red') self.config(state=tk.DISABLED) def start(self): if self.started: return self.started = True self.original_stdout = sys.stdout self.original_stderr = sys.stderr stdout_redirector = ConsoleText.StdoutRedirector(self) stderr_redirector = ConsoleText.StderrRedirector(self) sys.stdout = stdout_redirector sys.stderr = stderr_redirector def stop(self): if not self.started: return self.started = False sys.stdout = self.original_stdout sys.stderr = self.original_stderr def write(self,val,is_stderr=False): #Fun Fact: The way Tkinter Text objects work is that if they're disabled, #you can't write into them AT ALL (via the GUI or programatically). Since we want them #disabled for the user, we have to set them to NORMAL (a.k.a. ENABLED), write to them, #then set their state back to DISABLED. self.write_lock.acquire() self.config(state=tk.NORMAL) self.insert('end',val,'STDERR' if is_stderr else 'STDOUT') self.see('end') self.config(state=tk.DISABLED) self.write_lock.release()

  Read the article

• Stange stream of HTTP GET requests in apache logs, from amazon ec2 instances

  - by Alexandre Boeglin

  I just had a look at my apache logs, and I see a lot of very similar requests: GET / HTTP/1.1 User-Agent: curl/7.24.0 (i386-redhat-linux-gnu) libcurl/7.24.0 \ NSS/3.13.5.0 zlib/1.2.5 libidn/1.18 libssh2/1.2.2 Host: [my_domain].org Accept: */* there's a steady stream of those, about 2 or 3 per minute; they all request the same domain and resource (there are slight variations in user agent version numbers); they come form a lot of different IPv4 and IPv6 addresses, in blocs that belong to amazon ec2 (in Singapore, Japan, Ireland and the USA). I tried to look for an explanation online, or even just similar stories, but couldn't find any. Has anyone got a clue as to what this is? It doesn't look malicious per say, but it's just annoying me, and I couldn't find any more information about it. I first suspected it could be a bot checking if my server is still up, but: I don't remember subscribing to such a service; why would it need to check my site twice every minute; why doesn't it use a clearly identifying fqdn. Or, should I send this question to amazon, via their abuse contact? Thanks!

  Read the article

• Blocking requests from specific IPs using IIS Rewrite module

  - by Thomas Levesque

  I'm trying to block a range of IP that is sending tons of spam to my blog. I can't use the solution described here because it's a shared hosting and I can't change anything to the server configuration. I only have access to a few options in Remote IIS. I see that the URL Rewrite module has an option to block requests, so I tried to use it. My rule is as follows in web.config: <rule name="BlockSpam" enabled="true" stopProcessing="true"> <match url=".*" /> <conditions logicalGrouping="MatchAll" trackAllCaptures="false"> <add input="{REMOTE_ADDR}" pattern="10\.0\.146\.23[0-9]" ignoreCase="false" /> </conditions> <action type="CustomResponse" statusCode="403" /> </rule> Unfortunately, if I put it at the end of the rewrite rules, it doesn't seem to block anything... and if I put it at the start of the list, it blocks everything! It looks like the condition isn't taken into account. In the UI, the stopProcessing option is not visible and is true by default. Changing it to false in web.config doesn't seem to have any effect. I'm not sure what to do now... any ideas?

  Read the article

• Ubuntu 10.04 server delay responding to AJAX requests

  - by DanielAttard

  I manage a Ubuntu 10.04 server with a couple of domains hosted on it. As I continue to learn more about all these wonderful new (for me), one issue that I have begun to notice is the delay it sometimes takes for the server to respond to certain requests. As an example, when I view the timeline of events using firebug I can see that most of the time when I make a POST, the server responds in under 100ms. Sometimes, however, there is a substantial delay before the RESPONSE from the server. I can't seem to tell when the delay will happen and when it won't, however, when it happens the delay is always for about 4.5 seconds. The delay seems to happen about 30-40% of the time. Here is the section of apache2.conf dealing with logs: # # The following directives define some format nicknames for use with # a CustomLog directive (see below). # If you are behind a reverse proxy, you might want to change %h into %{X-Forwarded-For}i # LogFormat "%v:%p %h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" vhost_combined LogFormat "%h %l %u %t \"%r\" %>s %O \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %O" common LogFormat "%{Referer}i -> %U" referer LogFormat "%{User-agent}i" agent I have no idea where to look to try and debug this problem or investigate further. Any suggestions?

  Read the article

• How will I support 100,000 requests an hour?!

  - by tylerl

  I know this question is a little strange but I got lucky with an idea and I need some numbers to use for when I try to make a deal with a company. I'm wondering how much it'll cost me to run a site that's heavy on PHP and gets between 70,000 and 100,000 requests an hour on something like Rackspace's Cloud Servers. I have no idea how many servers I need or how much RAM each one should have. There will be a decent number of images on the site (probably something like 10,000 in the first couple weeks) and the site runs on about 2,500 lines of PHP code. I figure I should sign up for a CDN of some kind, although CDN In A Box is all I've heard of and I'm not sure it's necessary for a site that's already on a cloud platform. I've obviously never done anything like this before so I'm just looking to get an estimation of what I need for this massive site... Also, I use a database and I was wondering how that works - would I dedicate one of the cloud servers to running the database or would I need to put the database into each of the cloud servers? Thanks in advance...

  Read the article

• arp requests are sent continuously and my linux machine disconnected to the world

  - by sees

  I have the following problem and really need your help I'm implementing a small server to receive request from client on port 18999(just sample) using TCP socket. When I tested my server by using a lot of requests from a tablet through a router, I got the ARP problem(?) My net work just like: TABLET <------- WIRELESS ROUTER <------- MY SERVER (LINUX) Problems: 1. Can not connect to my Linux any more ( telnet, ping v.v...unreachable) 2. I use serial cable to connect to my Linux machine and use Wiresharp (from Windows) to catch the send message from Linux. It says that Linux keeps sending out continuously every 3 seconds ARP messages like the following: xx:xx:99:77:ff:69 ff:ff:ff:ff:ff:ff ARP 60 Who has 192.168.10.2? Tell 192.168.10.3 In the above message: xx:xx:99:77:ff:69 my Linux MAC address 192.168.10.2 my Tablet address 192.168.10.3 my Linux IP address Can you help me figure out the problem? Or tell me the way to detect the problem and reset the network back to normal (maybe restart Linux but I want to detect problem and restart automatically) UPDATE: 1. The above network works normally if tablet sends messages to my LINUX in normal speed (but also down after 48 hours) 2. The router works again after I unplugged my Linux ethernet cable (RJ45) from router. 3. The wireless network still works ( I can browser the router page from tablet) 4. When I use: ifconfig down then ifconfig up , the Linux restarts (?????????)

  Read the article

• dhclient requests filling memory?

  - by shanethehat

  Dammit Jim, I'm a web developer, not a sys admin. With that out of the way, my client's has a CentOS server (6.2) that is only serving a single Magento site (and the associated MySQL server) and it is frequently running out of memory, despite the site only currently being open to 5 users. I'm investigating the logs to try to figure out why the memory usage is so high, but I don't really know what I'm looking at. It seems that there are a lot of entries in /var/log/messages concerning DHCP requests, approximately one every 15 seconds, that look like this: Apr 7 14:23:06 s15940039 dhclient[815]: DHCPREQUEST on eth0 to 172.30.102.85 port 67 (xid=0x6b5cd2a7) Is this normal? I don't see anything else in here that I don't recognise, but then I'm not sure I'd know the problem if I did see it. 4 days ago the server ran out of memory completely and locked up, requiring a restart. The DHCP messages did not start up again for 23 hours, but then carried on as before. I have read this question which describes the same issue, but in my case a fresh DHCP lease does not ever seem to be issued. Is this something I should push back to the hosting provider, or have I not yet found the source of the memory problem?

  Read the article

• Conditionally permitting HTTP-only requests to Tomcat?

  - by Mike

  I have 2 versions of a system: Tomcat webserver Nginx reverse-proxy sitting in front of a tomcat webserver. In version 2, nginx only ever talks to Tomcat over HTTP. A user could configure the system so that only HTTPS requests are allowed. If the user does this in Version 1 and then the XML configuration files for Tomcat takes care of this. In version 2, nginx takes care of this. The problem is this: I cannot force a user to update their Tomcat XML config files when they upgrade from version 1 to version 2 (it will be recommended that they do so) because this is done as part of a larger process. This means that if they upgrade and don't update the Tomcat config, an HTTPS request will arrive at nginx, which will proxy it over HTTP to Tomcat which will reject the request because it is not HTTPS. So I can't force an update to the Tomcat XML, and I have to use HTTP between nginx and Tomcat. Any ideas? Is there some way I can affect how Tomcat reads its config in Version 2 so that it ignores the HTTPS-only section?

  Read the article

• IIS 7.5 stops serving requests for no apparent reason

  - by Steffen

  We're running a site on 4 virtual Win 2008 R2 64 bit servers. This is the only site on the IIS, and we use Windows Network Load Balancing to share the load between our 4 virtual servers. We've used these virtual servers for approximately a week, and we're starting to see some issues. For no apparent reason the IIS stops serving pages, and doesn't even respond with an error. So upon requesting a page from the server, the browser just waits infinitely (or until it decides to give up clientside) Sometimes an iisreset fixes the issue, other times we have to reboot the entire virtual server. There are no traces in the eventlog of why this happens, and there's no traces in our applications exception log neither. Furthermore this happens even when there's a very small load on the server, so it doesn't seem to be because it's flooded with requests. So frankly I'm at a loss here - I have no idea where to start debugging this issue :-( I'm quite certain we never had these issues on our physical servers, however they were running Win 2003 32bit, so there are quite a few differences between them and the virtual ones. (Which obviously makes it difficult to tell what exactly causes this)

  Read the article

• Change Outlook's default calendar to iCloud (meeting requests end up in wrong calendar)

  - by flohei

  Following scenario: I've got a main computer (Windows 7, Office 2010) which is being used to manage contacts, meetings, etc. using Outlook. Now I've added an iPad and an iPhone to sync using iCloud. I moved all appointments and contacts from the old PST file to the iCloud file. All the data syncs nicely. The email account I'm using in Outlook is an IMAP account which opens up another data file which brings us to a total of three data files in Outlook's side bar. The problem: When one of our clients sends us meeting requests via email they show up in the IMAP's inbox. When we open them up they automatically get added to Outlook's default calendar (the one in the original PST). Is there any chance not to add them to that calendar but the iCloud one? Basically we could completely get rid of the original PST since we don't use it at all anymore but the settings do not allow me to remove this PST file and set the iCloud one as default. Thanks!

  Read the article

• 100% CPU when doing 4 or more concurrent requests with Magento

  - by pancake

  Currently I'm having trouble with a server running Magento, it's unbelievably slow. It's a VPS with a few Magento installations on it used for development, so I'm the only one using them. When I do 4 request all 2 seconds after each other I'm finished in 10 seconds. Slow, but still within the limits of my patience. When I do 4 "concurrent" requests, however (opening 4 tabs in a row, very quickly) all four cores go to 100% and stay there for like a minute. How is this possible? I know that there are a lot of possibilities here, so any tips on how to make an Apache/PHP server go faster are also welcome. It used to go a lot faster before, and I've also tried APC, but it kept causing problems (PHP errors, something with memory pools) so I've disabled it. By the way, the Magento cache is off and compiling is also off. I know this makes Magento slower than usual, but I don't think a 60 second response time is normal for any Magento installation. Virtual hardware: 4 Cores and 4096MB RAM Swap is never used (checked with htop) 100GB disk space, of which 10% is in use Software: Debian 6 DirectAdmin and apache custombuild PHP 5.2.17 (CLI) If you need more info, please tell me how to get it, because I probably don't know how. I do know how to use the command line in linux and the usage of quite a few commands, but my experience with managing a server is limited.

  Read the article

• One single page showing 3 requests (also printing the headers)

  - by Korcholis

  Someone in my studio designed a webpage some years ago, and now the client decided to change the server (he moved to a Linux Apache server running Gen2 SMP, 64 bits, PHP version 5.3.8, Standard MYSQL version 5). It suddenly started to do weird things. When clicking on a link that requires login, the page redirects you to the login page using header() function in PHP. Curiously, the page shows this: OK The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [no address given] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. HTTP/1.1 200 OK Date: Mon, 15 Oct 2012 17:27:32 GMT Server: Apache/2.2.22 (Unix) FrontPage/5.0.2.2635 X-Powered-By: PHP/5.3.8 Expires: Thu, 19 Nov 1981 08:52:00 GMT Cache-Control: no-store, no-cache, must-revalidate, post-check=0, pre-check=0 Pragma: no-cache Keep-Alive: timeout=5, max=399 Connection: Keep-Alive Transfer-Encoding: chunked Content-Type: text/html 232c Then the page itself, and then, another header: 0 1f4 OK The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, [no address given] and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. 0 What's most intriguing is that if you refresh the page or hit enter on the url, it loads correctly. I've been checking the logs, and it only blames of an inexisting favicon. I also checked the .htaccess, everything was correct (RewriteBase was / as intended, and the only stuff there is another rule that moves ^en/ requests to request?lang=en. Has anyone faced something like this? Edit: IE doesn't trigger these two headers. This is getting wierder.

  Read the article

• Tunnell network requests with Windows 7

  - by mark

  I've Windows 7 64bit Pro client in a private LAN behind a Netgear wgr614v7 router. I've also a remote Debian server machine outside. I'd like to tunnel all (or specified ports/protocols) over this outside server, so when I'm on the Windows machine and I request serverfault.com it would not appear from the wgr614v7 public IP but from the server. But it's not only about HTTP traffic, it's basically about everything I'd like to: other TCP ports, even UDP, etc. It must be transparent to the application, e.g. they shouldn't be aware of this. All their requests just appear as being from the server and the tunnel between them takes care about the packets. I'm aware of e.g. Putty and forwarding individual ports or using it as a socks proxy, however not many applications to support this and the support in windows itself looks non-existent to me. I might add it should be something "reasonable" easy to set up. I've heard about PPTP but I'm unsure about it's security implications (by design). Should I go for VPN? There seem to be two common solutions for Linux (OpenSwan and StrongSwan), why would I pick the one over the other? I also fear that setting up a VPN might be quite complex, OTOH maybe it's the only sane way to do the things right? Or is OpenVPN sufficient? I'm seeking for open (source) solutions, what other options to I have or which direction should I head to?

  Read the article

• How would you solve this graph theory handshake problem in python?

  - by Zachary Burt

  I graduated college last year with a degree in Psychology, but I also took a lot of math for fun. I recently got the book "Introductory Graph Theory" by Gary Chartrand to brush up on my math and have some fun. Here is an exercise from the book that I'm finding particularly befuddling: Suppose you and your husband attended a party with three other married couples. Several handshakes took place. No one shook hands with himself (or herself) or with his (or her) spouse, and no one shook hands with the same person more than once. After all the handshaking was completed, suppose you asked each person, including your husband, how many hands he or she had shaken. Each person gave a different answer. a) How many hands did you shake? b) How many hands did your husband shake? Now, I've been reasoning about this for a while, and trying to draw sample graphs that could illustrate a solution, but I'm coming up empty-handed. My logic is this: there are 8 different vertices in the graph, and 7 of them have different degrees. The values for the degrees must therefore be 0, 1, 2, 3, 4, 5, 6, and x. The # of degrees for one married couple is (0, 6). Since all graphs have an even number of odd vertices, x must be either 5, 3, or 1. What's your solution to this problem? And, if you could solve it in python, how would you do it? (python is fun.) Cheers.

  Read the article

• How would you solve this graph theory handshake problem in python?

  - by Zachary Burt

  I graduated college last year with a degree in Psychology, but I also took a lot of math for fun. I recently got the book "Introductory Graph Theory" by Gary Chartrand to brush up on my math and have some fun. Here is an exercise from the book that I'm finding particularly befuddling: Suppose you and your husband attended a party with three other married couples. Several handshakes took place. No one shook hands with himself (or herself) or with his (or her) spouse, and no one shook hands with the same person more than once. After all the handshaking was completed, suppose you asked each person, including your husband, how many hands he or she had shaken. Each person gave a different answer. a) How many hands did you shake? b) How many hands did your husband shake? Now, I've been reasoning about this for a while, and trying to draw sample graphs that could illustrate a solution, but I'm coming up empty-handed. My logic is this: there are 8 different vertices in the graph, and 7 of them have different degrees. The values for the degrees must therefore be 0, 1, 2, 3, 4, 5, 6, and x. The # of degrees for one married couple is (0, 6). Since all graphs have an even number of odd vertices, x must be either 5, 3, or 1. What's your solution to this problem? And, if you could solve it in python, how would you do it? (python is fun.) Cheers.

  Read the article

• Python win32com - Automating Word - How to replace text in a text box?

  - by Greg

  I'm trying to automate word to replace text in a word document using Python. (I'm on word 2003 if that matters and Python 2.4) The first part of my replace method below works on everything except text in text boxes. The text just doesn't get selected. I notice when I go into Word manually and hit ctrl-A all of the text gets selected except for the text box. Here's my code so far: class Word: def __init__(self,visible=0,screenupdating=0): pythoncom.CoInitialize() self.app=gencache.EnsureDispatch(WORD) self.app.Visible = visible self.app.DisplayAlerts = 0 self.app.ScreenUpdating = screenupdating print 'Starting word' def open(self,doc): self.opendoc=os.path.basename(doc) self.app.Documents.Open(FileName=doc) def replace(self,source,target): if target=='':target=' ' alltext=self.app.Documents(self.opendoc).Range(Start=0,End=self.app.Documents(self.opendoc).Characters.Count) #select all alltext.Find.Text = source alltext.Find.Replacement.Text = target alltext.Find.Execute(Replace=1,Forward=True) #Special handling to do replace in text boxes #http://word.tips.net/Pages/T003879_Updating_a_Field_in_a_Text_Box.html for shp in self.app.Documents(self.opendoc).Shapes: if shp.TextFrame.HasText: shp.TextFrame.TextRange.Find.Text = source shp.TextFrame.TextRange.Find.Replacement.Text = target shp.TextFrame.TextRange.Find.Execute(Replace=1,Forward=True) #My Usage word=Word(visible=1,screenupdating=1) word.open(r'C:\Invoice Automation\testTB.doc') word.replace('[PGN]','1') The for shp in self.app .. section is my attempt to hit the text boxes. It seems to find the text box, but it doesn't replace anything.

  Read the article

< Previous Page | 197 198 199 200 201 202 203 204 205 206 207 208  | Next Page >