Search Results

Search found 33971 results on 1359 pages for 'ask and learn'.

Page 204/1359 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Purple line on left side of screen when I use graphics card's hdmi port

  - by fab

  My graphics card is a nVidia GeForce GTX 660 2GB. When I plug HDMI into mobo it works fine. When I plug it into the graphics card (with 2nd monitor too) it shows a purple vertical line on the left side. It adds 2 pixels to the width and I can't adjust it with my monitor. It doesn't come up when I print screen. I tried changing the driver to the binary one (at the top) but that made it not show up at all. What do I do? Are some graphics cards just not compatible?

  Read the article

• Cisco PrecisionHD USB Camera (Detected but no video)

  - by Marcel Bissonnette

  I'm having an issue with my Cisco PrecisionHD USB Camera. It is detected but does not show video (using "Cheese Webcam Booth"). Any ideas? (I'm a newbie with ubuntu) Specs: Ubuntu 12.10 32bit Dell Latitude E6400 Cisco PrecisionHD USB Camera (USB 2.0) connected directly into laptop (no docking station) Troubleshooting: Using the command lsusb, I find the following device: Bus 002 Device 003: ID 1f82:0001 TANDBERG PrecisionHD Camera '+ more devices like audio, finger swipe, Linux foundation 2.0, 1.1 So what now? Thanks. MB

  Read the article

• Good alternative to NetLimiter(windows) for ubuntu

  - by Harsh

  there is program NetLimiter for windows. while I was using windows it was very useful to me to find out the IP address of ther person who was downloading from me, or to know IP address of any person on lan who was using DC++ with some nick. and after that I can easily know the computer name of that person using nbtstat. I was wondering if there is any tool for ubuntu using which I an find out the IP address of person who is downloading from me or from whom I am downloading on lan. I am on university lan and we are using PtokaX and DC++ for file sharing on lan. people sometimes put some offencive stuff on open chat on DC++ using some Nick and I don't know how to trace them while I am using Ubuntu. Plz help.

  Read the article

• 13.04 Logitech bluetooth speaker adapter pairing but no mixer output

  - by user1455622

  I had to change [General] Enable = Socket in /etc/bluetooth/audio.conf to get it to pair. But now that they are I don't get an output in pavucontrol. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/HFPAG on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/HFPHS on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/A2DPSource on adapter /org/bluez/3855/hci0. D: [pulseaudio] bluetooth-util.c: Registering /MediaEndpoint/A2DPSink on adapter /org/bluez/3855/hci0. E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists E: [pulseaudio] bluetooth-util.c: org.bluez.Media.RegisterEndpoint() failed: org.bluez.Error.AlreadyExists: Already Exists D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'disconnected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'connected' D: [pulseaudio] bluetooth-util.c: dbus: property 'State' changed to value 'connected' D: [pulseaudio] bluetooth-util.c: Unknown Bluetooth minor device class 0 D: [pulseaudio] module-card-restore.c: Not restoring profile for card bluez_card.C8_84_47_15_B7_34, because already set. I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card bluez_card.C8_84_47_15_B7_34. I: [pulseaudio] card.c: Created 2 "bluez_card.C8_84_47_15_B7_34" W: [pulseaudio] module-bluetooth-device.c: Profile has no transport D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event. I: [pulseaudio] card.c: Changed profile of card 2 "bluez_card.C8_84_47_15_B7_34" to off I: [pulseaudio] module.c: Loaded "module-bluetooth-device" (index: #22; argument: "address=C8:84:47:15:B7:34 profile=a2dp"). I: [alsa-source] alsa-source.c: Scheduling delay of 10,06ms, you might want to investigate this to improve latency... I: [alsa-source] ratelimit.c: 5 events suppressed I: [alsa-source] alsa-source.c: Overrun! I: [alsa-source] alsa-source.c: Increasing minimal latency to 2,00 ms D: [alsa-source] alsa-source.c: latency set to 20,00ms D: [alsa-source] alsa-source.c: hwbuf_unused=62008 D: [alsa-source] alsa-source.c: setting avail_min=442 What can I do to get it working? Regards,

  Read the article

• How to do firmware updates/upgrades to a Blackberry

  - by Luis Alvarado

  I have several clients/friends that have Blackberry and wish to update their phone but without installing Windows. Any windows. Just doing it from Ubuntu. How can this be done. The update the mention is for the firmware and new programs for the phone. I do not know much about Blackberries since am more of an android guy. At the end they want support for upgrade/update the Blackberry from within Linux and sync it to the PC (Backups, upload/download stuff to and from it). I have seen 2 types of projects working on this: Linberry (From Venezuela ;) ) - http://linberry.webcindario.com/ Barry - http://www.netdirect.ca/software/packages/barry but so far neither offers updating the firmware or downloading updates. Are there any Ubuntu blackberry projects I am not aware of.

  Read the article

• Ubuntu 12.10 stucks in a Login Loop

  - by Calvin Wahlers

  My problem: As you can guess my Ubuntu 12.10 stucks in a login loop when trying to enter my desktop. Means the screen gets black and soon after that the login screen comes back. I'm a Ubuntu Newbie so if there's any answer please explain in a simply understandable language :) I've already read that the problem might be caused by an error depending on the graphics, so I post my graphics to: My graphics: ATI Radeon 7670M Hope you can help me, thank you ;)

  Read the article

• Problem installing ubuntu touch on galaxy nexus

  - by Francesco

  I've installed ubuntu touch on my galaxy nexus following the tutorial on the official site. However the latter is not so clear.. In particular, during the installation, user action on the phone is requested and not documented on the tutorial: 1) The phone asked me whether rebooting, wiping the cache or something else (i did nothing and the phone rebooted) 2) The phone asked me whether replacing or not cmw (or something similar). I asked no.. After the installation all seemed to work correctly. However after shutting down the phone can't power on anymore... When I push the power button the battery icon appears, showing that the battery is completely charged. What am I supposed to do?

  Read the article

• How to install Neatx-Server on ubuntu 12.10?

  - by user111245

  After try: 1. sudo apt-get install python-software-properties && sudo add-apt-repository ppa:freenx-team 2. sudo add-apt-repository ppa:nathan-renniewaldock/ppa && sudo add-apt-repository ppa:freenx-team 3. sudo add-apt-repository ppa:freenx-team None can let the sudo apt-get update to be succeed. Not to mention sudo apt-get install neatx-server. (found no neatx-server) Is there a solution for that? thanks~

  Read the article

• Rhythmbox is crashing on start

  - by Kristal

  I'm using ubuntu 10.10 and until about 3 days ago rhythmbox worked fine but now when I start it, it opens, then after 4 second it crashes. When running it from terminal I get this: ~$ rhythmbox (rhythmbox:27420): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed ** Message: pygobject_register_sinkfunc is deprecated (GstObject) (rhythmbox:27420): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed Segmentation fault and then rhythmbox closes. What to do? =\ Edit: Disabled most of the plugins and it's not crashing now, but i still get when running from terminal (rhythmbox:27420): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed ** Message: pygobject_register_sinkfunc is deprecated (GstObject) (rhythmbox:27420): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed should I worry?

  Read the article

• usb devices unacessible

  - by Dustin

  I have a funny thing happening with my USB devices. They are detected and show up as they should but I cannot write to them, I can read the files in them. I cannot change the Group folder access. It keeps reverting to none when I try change it. However when I start a guest session and copy a screen shot to the USB I can, but cannot in my regular administration session. Why cannot I change the option and why does it behave properly in a guest session but not normally? Anyone know how to help me out here? I am using Ubuntu 12.04, 32-bit.

  Read the article

• Ubuntu One Bookmark sync not working.

  - by Rob

  Everything in Ubuntu One sync works great except bookmark sync. I tried the wiki answer that said to run: killall beam.smp beam rm ~/.config/desktop-couch/desktop-couchdb.ini dbus-send --session --dest=org.desktopcouch.CouchDB --print-reply --type=method_call / org.desktopcouch.CouchDB.getPort This is what my terminal came back with: robin@robin-MIDWAY:~$ killall beam.smp beam beam: no process found robin@robin-MIDWAY:~$ rm ~/.config/desktop-couch/desktop-couchdb.ini rm: cannot remove `/home/robin/.config/desktop-couch/desktop-couchdb.ini': No such file or directory robin@robin-MIDWAY:~$ dbus-send --session --dest=org.desktopcouch.CouchDB --print-reply --type=method_call / org.desktopcouch.CouchDB.getPort Error org.freedesktop.DBus.Error.NoReply: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. robin@robin-MIDWAY:~$ I'm a computer "newbie" so it's possible I'm doing something wrong, are there any tutorials out there on how to use the CouchDB? I have Bindwood installed.

  Read the article

• What is the structure of network managers system-connections files?

  - by Oyks Livede

  could anyone list the complete structure of the configuration files, which network manager stores for known networks in /etc/NetworkManager/system-connections for known networks? Sample (filename askUbuntu): [connection] id=askUbuntu uuid=81255b2e-bdf1-4bdb-b6f5-b94ef16550cd type=802-11-wireless [802-11-wireless] ssid=askUbuntu mode=infrastructure mac-address=00:08:CA:E6:76:D8 [ipv6] method=auto [ipv4] method=auto I would like to create some of them by my own using a script. However, before doing so I would like to know every possible option. Furthermore, this structure seems somehow to resemble the information you can get using the dbus for active connections. dbus-send --system --print-reply \ --dest=org.freedesktop.NetworkManager \ "$active_setting_path" \ # /org/freedesktop/NetworkManager/Settings/2 org.freedesktop.NetworkManager.Settings.Connection.GetSettings Will tell you: array [ dict entry( string "802-11-wireless" array [ dict entry( string "ssid" variant array of bytes "askUbuntu" ) dict entry( string "mode" variant string "infrastructure" ) dict entry( string "mac-address" variant array of bytes [ 00 08 ca e6 76 d8 ] ) dict entry( string "seen-bssids" variant array [ string "02:1A:11:F8:C5:64" string "02:1A:11:FD:1F:EA" ] ) ] ) dict entry( string "connection" array [ dict entry( string "id" variant string "askUbuntu" ) dict entry( string "uuid" variant string "81255b2e-bdf1-4bdb-b6f5-b94ef16550cd" ) dict entry( string "timestamp" variant uint64 1383146668 ) dict entry( string "type" variant string "802-11-wireless" ) ] ) dict entry( string "ipv4" array [ dict entry( string "addresses" variant array [ ] ) dict entry( string "dns" variant array [ ] ) dict entry( string "method" variant string "auto" ) dict entry( string "routes" variant array [ ] ) ] ) dict entry( string "ipv6" array [ dict entry( string "addresses" variant array [ ] ) dict entry( string "dns" variant array [ ] ) dict entry( string "method" variant string "auto" ) dict entry( string "routes" variant array [ ] ) ] ) ] I can create new setting files using the dbus (AddSettings() in /org/freedesktop/NetworkManager/Settings) passing this type of input, so explaining me this structure and telling me all possible options will also help. Afaik, this is a Dictionary{String, Dictionary{String, Variant}}. Will there be any difference creating config files directly or using the dbus?

  Read the article

• How can I restore a corrupted Shotwell db?

  - by Yann Dìnendal

  While I was importing photos from a SD card in Shotwell, my laptop has crashed (shutdown because of over-heating). Now, I can no longer launch Shotwell: $ shotwell ** ERROR:x86_64-linux-gnu/db/VersionTable.c:104:version_table_construct: assertion failed: (res == SQLITE_OK) If I move the .db file ~/.shotwell/data/photo.db elsewhere so it is no longer present (but backed-up), shotwell will launch, but will rebuild its library, which will be empty. I can re-import the folders shotwell creates, but I lose nearly all meta-data (most importantly the "folders", or events, and their main picture) Is there a way to repair/rebuild/restore photo.db? How can I see what's inside? how bad it's damaged? Or is there another way to get back my events and imports?

  Read the article

• Could anyone help me get my NETGEAR WNA3100 (Broadcom BCM43231) wireless adapter to work?

  - by Matthew Carroll

  I have just moved back to Ubuntu from Windows 7 and a few months ago, I bought a NETGEAR WNA3100 wireless adapter because my old adapter had broken. I plugged in my adapter and it doesn't seem to work, I also used the windows 7 drivers for it and tried them on the program "Windows Wireless Drivers" and they don't seem to recognize the device. However I have heard you need XP drivers but I can't seem to find them on the internet nor find them on the CD. Could anyone help me get my wireless adapter to work? Any help is greatly appreciate. P.S I do have internet connection though I have to tether my phone to my computer and then connect my phone to my router.

  Read the article

• Setting up shared connection

  - by Calvin Froedge

  I have a network that is connected to the internet via a switch connected to a router. I have it setup like this so I can work on the new network without causing problems on the old. Anyway, I'm trying to enable internet connection sharing. Internet comes to server like this: Modem - Router - Switch - Ubuntu 11.10 (Eth0) I want to share the connection through Eth1 (Eth1 - Managed Switch - Clients). Here is my config for /etc/network/interfaces: I have a DHCP server running on Eth1. Here is my config: ddns-update-style none; option domain-name "myserver.local"; option domain-name-servers 192.168.1.2, 8.8.8.8; default-lease-time 600; max-lease-time 7200; authoritative; subnet 192.168.1.0 netmask 255.255.255.0 { interface eth1; range 192.168.1.3 192.168.1.254; option routers 192.168.1.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.1.255; } Here is /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp #Used for internal network auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 broadcast 192.168.1.255 network 192.168.1.0 Here is /etc/hosts: 127.0.0.1 localhost 127.0.1.1 myserver.isp.com server 192.168.1.2 server.myserver.local server myserver.local In /etc/sysctl.conf, I've set the following: net.ipv4.ip_forward=1 Finally, in /etc/rc.local, I've set the following: /sbin/iptables -P FORWARD ACCEPT /sbin/iptables --table nat -A POSTROUTING -o eth1 -j MASQUERADE When I ping 8.8.8.8 (google's DNS) from a client that is authenticated with my DHCP server (they have been assigned a local ip, like 192.168.1.10), I get a timeout. How can I debug this further to figure out where my problem is?

  Read the article

• Ubuntu suddenly won't boot on a Mac

  - by emchristiansen

  I installed 11.10 in dual-boot mode following instructions here: https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation Everything worked fine, until I recently updated from Mac OS 10.6.x to the latest 10.6.x (this was a minor update prompted by OS X). The update made the rEFIt screen disappear, so I ran Boot Repair and reinstalled rEFIt and everything worked. I accidentally left my computer without power while booted into Ubuntu, until it presumably died or hibernated itself. I have been unable to boot into Ubuntu since. I didn't see the GRUB screen when I selected Linux the rEFIt chooser. Then I reinstalled rEFIt and the Linux option disappeared from the rEFIt chooser. This is a link to the boot info collected by Boot Repair: http://paste.ubuntu.com/755543/ Any help would be appreciated, especially an explanation of what all these components are (EFI, MBR, GPT, GRUB), where they live on disk, how the system knows to find each component, and how they relate to each other. Thanks!

  Read the article

• Building/Installing Required a52 Plugin

  - by user71139

  I am trying to compile and install the a52 plugin following the instructions from here: https://help.ubuntu.com/community/DigitalAC-3Pulseaudio This worked on Ubuntu 11.10 but gives me some errors when I try to compile the plugin on Ubuntu 12.04. I've searched for a solution however I couldn't find much on this topic in general, not to talk about a solution. I would really appreciate some help on this: bogdan@bogdan-desktop:~$ cd ~/tmp/ bogdan@bogdan-desktop:~/tmp$ cd alsa-plugins-1.0.25/ bogdan@bogdan-desktop:~/tmp/alsa-plugins-1.0.25$ make make all-recursive make[1]: Entering directory `/home/bogdan/tmp/alsa-plugins-1.0.25' Making all in oss make[2]: Entering directory `/home/bogdan/tmp/alsa-plugins-1.0.25/oss' /bin/bash ../libtool --tag=CC --mode=compile gcc -DHAVE_CONFIG_H -I. -I.. -Wall -g -I/usr/include/alsa -g -O2 -MT ctl_oss.lo -MD -MP -MF .deps/ctl_oss.Tpo -c -o ctl_oss.lo ctl_oss.c ../libtool: line 831: X--tag=CC: command not found ../libtool: line 864: libtool: ignoring unknown tag : command not found ../libtool: line 831: X--mode=compile: command not found ../libtool: line 997: *** Warning: inferring the mode of operation is deprecated.: command not found ../libtool: line 998: *** Future versions of Libtool will require --mode=MODE be specified.: command not found ../libtool: line 1141: Xgcc: command not found ../libtool: line 1141: X-DHAVE_CONFIG_H: command not found ../libtool: line 1141: X-I.: command not found ../libtool: line 1141: X-I..: command not found ../libtool: line 1141: X-Wall: command not found ../libtool: line 1141: X-g: command not found ../libtool: line 1141: X-I/usr/include/alsa: No such file or directory ../libtool: line 1141: X-g: command not found ../libtool: line 1141: X-O2: command not found ../libtool: line 1141: X-MT: command not found ../libtool: line 1141: Xctl_oss.lo: command not found ../libtool: line 1141: X-MD: command not found ../libtool: line 1141: X-MP: command not found ../libtool: line 1141: X-MF: command not found ../libtool: line 1141: X.deps/ctl_oss.Tpo: No such file or directory ../libtool: line 1141: X-c: command not found ../libtool: line 1192: Xctl_oss.lo: command not found ../libtool: line 1197: libtool: compile: cannot determine name of library object from `': command not found make[2]: *** [ctl_oss.lo] Error 1 make[2]: Leaving directory `/home/bogdan/tmp/alsa-plugins-1.0.25/oss' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/bogdan/tmp/alsa-plugins-1.0.25' make: *** [all] Error 2 bogdan@bogdan-desktop:~/tmp/alsa-plugins-1.0.25$

  Read the article

• How do I rebuild a corrupt dpkg status file?

  - by Ramón

  Whenever I type sudo apt-get remove and then press the Tab key for auto-completion I get the following message: grep-status: /var/lib/dpkg/status:15945: expected a colon. I don't see anything especially strange at line 15945 in the status file. It's a dot character in the description field of a mono library package and inserting a colon did not help. Removing the line containing the dot did not work either. Overwriting the file with status-old resulted in the same message. Is there some way to rebuild the status file?

  Read the article

• Graphics on boot split into three sections

  - by a sandwhich

  I just installed 13.04 onto a new laptop because of the ease of install with the uefi bios. When I boot the system though, the screen is split into three sections each about 640x200 at the top of the screen, with the active terminal mirrored across them. Although I can login, startx fails due to something about a file. I have tried booting with vga=711 and normal nomodeset with no success. Booting the live usb I originally installed from results in the same issue. The graphics driver in the xorg.conf.something from what I can make out is set to vesa, but it could be set to some other four character value that is similar to vesa, hard to tell. How can I fix this? One thing to note, the laptop has two dedicated GT 750m's, along with the intel 4000 built into the processor. This is what it looks like, the purple box is what the grub2 menu was in before boot.

  Read the article

• How to find location of installed library

  - by Raven

  Background: I'm trying to build my program but first I need to set up libraries in netbeans. My project is using GLU and therefore I installed libglu-dev. I didn't note location where the libraries were located and now I can't find them.. I've switched to Linux just a few days ago and so far I'm very content with it, however I couldn't google this one out and becoming frustrated.. Is there way to find out where files of package were installed without running installation again? I mean if I got library xxx and installed it some time ago, is there somecommand xxx that will print this info? I've already tried locate, find and whereis commands but either I'm missing something or I just can't do it correctly.. for libglu, locate returns: /usr/share/bug/libglu1-mesa /usr/share/bug/libglu1-mesa/control /usr/share/bug/libglu1-mesa/script /usr/share/doc/libglu1-mesa /usr/share/doc/libglu1-mesa/changelog.Debian.gz /usr/share/doc/libglu1-mesa/copyright /usr/share/lintian/overrides/libglu1-mesa /var/lib/dpkg/info/libglu1-mesa:i386.list /var/lib/dpkg/info/libglu1-mesa:i386.md5sums /var/lib/dpkg/info/libglu1-mesa:i386.postinst /var/lib/dpkg/info/libglu1-mesa:i386.postrm /var/lib/dpkg/info/libglu1-mesa:i386.shlibs Other two commands fail to find anything. Now locate did it's job but I'm sure none of those paths is where the library actually resides (at least everything I was linking so far was in /usr/lib or usr/local/lib). The libglu was introduced just as example, I'm looking for general solution for this problem.

  Read the article

• Ubuntu 12.10 & 12.04.1 LTS mouse freezing (Saitek Cyborg R.A.T.5 Mouse)

  - by Eric Dand

  I've figured it out: it's the Cyborg mouse. I'll be looking through the questions as I remember seeing something about this. I'm getting a similar issue to this fellow: Ubuntu 11.04 randomly freezes for over one minute Sometimes it comes back to life after a minute or two only to crash again. Alt-tab works, but it does not display the windows-switching animation. It just switches the focus... sometimes. Ctrl-Alt-T works, thankfully, and the terminal stays responsive long enough for me to get in a "sudo reboot now" and type my password. I'm running a fresh Wubi install on a separate HDD from my Windows install. 64-bit 12.10 12.04.1 LTS now, with an AMD FX chip, 8GB of RAM, and a Radeon HD 3850. My mouse is a Saitek Cyborg R.A.T.5 Mouse, and my keyboard is a stock Acer one that came with a PC I bought a few years ago.

  Read the article

• which default.list should i modify for default applications and what are the differences between the 2

  - by damien

  I would like to add miro to the default application GUI in system settings/default applications.I added ;miro.desktopnext to all rhythmbox.desktop entries eventually discovering if it was not added to audio/x-vorbis+ogg=rhythmbox.desktop as audio/x-vorbis+ogg=rhythmbox.desktop;miro.desktop it would not appear in the system settings/default applications drop down list for audio. I can find default.list in either /etc/gnome/defaults.list or /usr/share/applications/defaults.list modifying either gives me the same results.What is the difference and which is the correct list to modify?

  Read the article

• apt-get install kernel source error

  - by MA1

  apt-get source linux-image-$(uname -r) gives me the below error Reading package lists... Done Building dependency tree Reading state information... Done Picking 'linux' as source package instead of 'linux-image-3.0.0-12-generic' NOTICE: 'linux' packaging is maintained in the 'Git' version control system at: http://kernel.ubuntu.com/git-repos/ubuntu/ubuntu-oneiric.git Skipping already downloaded file 'linux_3.0.0-17.30.dsc' Need to get 99.9 MB of source archives. Err http://pk.archive.ubuntu.com/ubuntu/ oneiric-updates/main linux 3.0.0-17.30 (tar) 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Err http://pk.archive.ubuntu.com/ubuntu/ oneiric-updates/main linux 3.0.0-17.30 (diff) 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Failed to fetch http://pk.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux_3.0.0.orig.tar.gz 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administratorThe request was rejected by the HTTP filter. Contact your ISA Server administrator. ) Failed to fetch http://pk.archive.ubuntu.com/ubuntu/pool/main/l/linux/linux_3.0.0-17.30.diff.gz 500 ( The request was rejected by the HTTP filter. Contact your ISA Server administrator. ) E: Failed to fetch some archives. Can someone suggest a solution?

  Read the article

• Ubuntu on a netbook. Wait for 12.10?

  - by Kevin Duke

  My friend has a really slow 2 yr old Toshiba netbook with 1GB of RAM. She is annoyed how slow Windows Starter runs on it so I suggested switching to Ubuntu. Since 12.10 is due in a few days, I'm not sure if we should wait before installing Ubuntu or if we should install it now in order to use Unity 2D. For a low-end device, should we use Unity 2D or use Unity 3D on 12.10 since Unity 2D is no longer present in 12.10? I understand Unity 3D has been greatly improved but is it faster than Unity 2D in the LTS version for a low-spec'd device?

  Read the article

• how to get back the firefox apparmor profile after deleting it

  - by Judderwocky

  I deleted the apparmor profile for firefox when I was tinkering with it... and now I can't get it back. I uninstalled (complete) the apparmor program, profiles, etc. and when it reinstalled, i still don't get the profile back (ie. /etc/apparmor.d./usr.bin.firefox* ) I learned that the apparmor profile for firefox is actually a apart of the firefox package... but i uninstalled firefox and reinstalled it and i still didn't get the file usr.bin.firefox* ) Is there somewhere I can download the file manually?

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >