Search Results

Search found 16442 results on 658 pages for 'computer forensics'.

Page 204/658 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Laptop white screen on power-up. Still displays via HDMI output

  - by Inno

  my wife's laptop recently started displaying a white screen. It doesn't show post or anything, just a white screen when it's powered on. However, it works normally with HDMI output to our television. I took it apart and fiddled with both ends of the display cable, but I either didn't fiddle correctly or that's just not the problem. I also noticed that the screen won't turn off anymore when the laptop is closed. Is there a name for the mechanism that controls this function, so I can try and locate it? My guesses are that the problem lies with the screen itself or the display cable, but I'm curious if there's anything else I might be overlooking. Also of note is that the left hinge is partially broken. The corner of the plastic computer case broke off, so the hinge is exposed and doesn't stay in place. I've tried holding it in place, wiggling it around, tapping various parts of the computer, but the white screen remains.

  Read the article

• Options to Reformat USB Drive

  - by user8783

  I have a 64GB usb thumb drive. When I plug it into a Windows system (I have tried several machines with both Windows 7 and 8), the system attempts to read it and never completes. The drive does not show up in the device manager, nor does it appear in Computer Management - Disk Management. If I click on the "Safely Remove Hardware" icon, however, I do get an option for "Eject Mass Storage Media", although it never accomplishes anything. Also, as long as the USB drive is connected, I cannot access other USB drives or even restart my computer. It seems as though it locks up Windows Explorer. Is there any option to reformat this drive? It was a great drive up until all this craziness began and I would hate to throw it out because it was rather pricey.

  Read the article

• How can I clear the "authentication cache" in Windows 7 to a password protected samba share?

  - by Chris Drumgoole

  I have a Linux samba server and have explicitly listed users that can access the folder. I have successfully congfigured Samba to require a username and password when accessing the share from windows (using the smbpasswd, etc.). But now I want to force clear the auth cache on the windows machine. Such as when I go to a colleague's computer, I use my account to access a file in the protected share, but then before I leave his computer, i'll want to make sure the authorization cache is cleared so he cannot access that folder with my credentials. I found the command to use in the windows command prompt on google a couple of weeks ago but silly me I didn't save it... Hope someone can help, thanks! Oh, Samba is configured as a workgroup and not a domain (if that helps) - so windows users do NOT log into a domain on start up. thanks!

  Read the article

• Remote connection to dynamic public ip & private ip addresses

  - by user51737

  Many times I connected to windows computer which has static public ip address via remote desktop over wan links. I'm wondering how could I connect to the remote computer that has dynamic public ip address & private ip addresses assigned. I've 2 systems at home: xp system-------connected to internet(dynamic public ip) & allowed other users to connected to the internet on the interface. windows vista system--------enabled dhcp on the interface to access internet from xp. How could I remotely connect from my office to the 'vista system'?. If I've a router/modem at my home it may be possible to allow the ports for the system but I don't. Any tips?

  Read the article

• hardware: delay and distinct 'click' before hard drive access

  - by matt lohkamp

  I have a windows 7 box stashed away in my closet, containing (among other things) 2 big HDDs linked together as a mirrored volume - basically a super lazy NAS / media server. I've noticed that when that drive is accessed (whether locally, on the machine itself, or remotely, from another computer, or my xbox, for example) there's a noticeable pause, and then from the computer itself, a 'click!' noise, after which the drive is accessed; e.g. open \\computername\shared\, wait 2 seconds, hear 'click!' and then see files appear in windows explorer. Any ideas? Otherwise the drive preforms normally - is it a windows thing? a HDD-about-to-die thing? Or a "yeah that always happens, you've just never noticed it before" thing?

  Read the article

• Restrict Administrators from changing system time - Windows XP machines (no domain)

  - by user72128

  I need to write a script that will remove all users under Local Computer Policy > Computer Configuration > Windows Settings > Security Settings > User Rights Assignment > Change the system time from the local group policy (gpedit.msc) on all Windows XP machines. These machines are not on the domain. I DO have a way to distribute and run the script automatically. Can someone point me in the right direction for creating a script like this?

  Read the article

• What kind of eye wear can I use to protect my eyes from being irritated from staring at a screen all

  - by dr dork

  Many of us stare at computer screens all day. Lately, my eyes have been irritated from prolonged staring at my computer screens. Does anyone use or know of any eye wear technology that helps with this? About five years back, I bought a pair of non-prescription eye glasses that had a no-glare layer put on them by an optometrist. It slightly helped, so I'm considering getting another pair. Is this the best option I have at this point? Thanks so much in advance for your wisdom!

  Read the article

• How to restart after making chnages to hosts.allow

  - by Mirage

  I have made chnages /etc/hosts/allow like ALL:ALL I have to restart the whole computer to check that , is there any service which i can restart to check the setting

  Read the article

• Crap, hard disk failure. Can I recover my "move"d folders?

  - by Doug

  I am in the process of moving all my files from an old laptop to new one. I just moved 11gb of data from my old laptop to a hard drive (external) and then upon moving it out to the new hard drive, the hard drive is getting a CRC (Data Error (Cyclic Redundancy Check). Now I am looking for a solution to recover the files that I moved on my old laptop (not the external). I understand they they are just marked for potential overwriting to free up space. I was getting ready to test out GetDataBack, but it says to install it on a healthy windows and use the recover-needed drive as an external. However, I don't want to turn off my computer without first getting the okay since it is in a "moved" state. Please help! What can I do to recover the Moved files. I haven't touched the computer since it has been moved. What can I use to recover them?

  Read the article

• Connect iPad to windows 7 VPN

  - by Linuz

  My iPad keeps spitting out the error: "A connection could not be established to the PPP server." I am trying to connect it to a VPN I set up with Windows 7 as an incoming connection. On the iPad, I went into the VPN settings, added a new PPTP VPN with the following information Server: Windows 7 Computer's IP RSA SecurID: OFF Account: Account Username Password: Account Password Encryption Level: Auto Send All Traffic: ON Proxy: Off Now I know that it is making some connection to the Windows 7 Computer because whenever I intentionally put in the wrong VPN password on the iPad, it makes me put in the correct one before trying to connect again. All the ports are forwarded on my router for PPTP, and my Windows 7 Firewall is even off to try to get this to work. Any help would be greatly appreciated, thanks.

  Read the article

• Using command line to connect to a wireless network with an http login

  - by Shane

  I'm trying to connect to a wifi network where it hijacks all requests and redirects you to a page where you have to agree to a terms of use before it lets you connect to the actual outside world. This is a pretty common practice, and usually doesn't pose much of a problem. However, I've got a computer running Ubuntu 9.10 server with no windowing system. How can I use the command line to agree to the terms of use? I don't have internet access on the computer to download packages via apt-get or anything like that. Sure, I can think of any number of workarounds, but I suspect there's an easy way to use wget or curl or something. Basically, I need a command line solution for sending an HTTP POST request essentially clicking on a button. For future reference, it'd be helpful to know how to send a POST request with, say, a username and password if I ever find myself in that situation in another hotel or airport.

  Read the article

• Blank screen during boot after clean Ubuntu 11.10 install (Intel N10 graphics)

  - by Coen

  After a clean install of Ubuntu 11.10 on my Asus eee PC 1005p, Ubuntu seems to boot correctly, except for initialization of the LCD screen. What I observe: I choose Ubuntu 11.10 in the GRUB 2 menu A blank screen with a blinking cursor in the top left of the screen, for 15-20 seconds. The ubuntu logo with 5 red dots in the center of the screen, for 1 second. The LCD screen is entirely blank The startup sound plays (Ubuntu is configured to auto-login) Still, the LCD screen is entirely blank. When I press Fn-F8 (the switch between LCD screen and external VGA), the LCD screen shows my desktop correctly and everything seems to work fine. Except for the adjust contrast buttons (Fn-F5 and Fn-F6), these seem to cycle through random brightness modes. Something like: 0% - 50% - 20% - 0% - 20% - 0% Any ideas what's causing this or how to solve this? coen@elpicu:~$ lspci -v 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller (prog-if 00 [VGA controller]) Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at f7e00000 (32-bit, non-prefetchable) [size=512K] I/O ports at dc00 [size=8] Memory at d0000000 (32-bit, prefetchable) [size=256M] Memory at f7d00000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: ASUSTeK Computer Inc. Device 83ac Flags: bus master, fast devsel, latency 0 Memory at f7e80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied>

  Read the article

• Screenflick Audio option in MacBook Pro

  - by John

  When after I shut down my MacBook Pro by holding the power button for a few sec, (which I found is bad for the computer, so I will not do anymore) I found that my speaker doesn't play until I plug in and out earphone into the machine. When my speaker is not working like this, and when I am on a random webcam chatting site like chatroulette.com, they can hear the music playing on my iTunes when I choose Screenflick Audio option in the Mic setting. But when the Speaker is working back again, they don't hear the music playing even when I do Screenflick Audio mode. How can I make it work? Also, how do you make the chatting partner hear my music playing on my computer while I talk to them (not via my speaker, since it's bad quality).

  Read the article

• Avoid cache overflow in Atempo LiveBackup

  - by Vebjorn Ljosa

  When attempting the initial backup of a new client, Atempo LiveBackup seems to require a very large cache. For instance, a 20 GB cache is not enough to back up a computer that has 100 GB of data. It appears that LiveBackup is adding new files to the cache at a faster rate than it can send them to the server. When the cache fills up, the backup fails. Aside from removing most data from the computer and then add them back gradually after the initial backup, is there a good workaround? Is it possible to make LiveBackup slow down its scan so as to not fill the cache? Or is it possible to place the cache on an external drive?

  Read the article

• Updating, etc., automatically

  - by Steve D

  Is there a way to set up Ubuntu 12.04 (or earlier versions) so that all recommended updates are done automatically, say once a week? When I say automatically, I mean no password entry or user intervention required. This sounds like a stupid request, so let me tell why I'm asking. My grandfather knows nothing about computers; he uses his solely to read Yahoo! mail. I want to get rid of his clunky, spyware-ridden Windows XP and install Ubuntu. I want to set it up so when he turns the computer on, after a couple minutes, voila!, Yahoo! mail, already signed in, ready to go. The problem is I don't want to have to go over there every week or so and make sure everything is up-to-date, he hasn't accidentally installed any spyware, etc. So can this be done? Is this the best way to set things up for my grandfather? Are there other things I should be worried about when it comes to keeping things hassle-free for him? Please don't post anything like "why not teach him how to... blah blah blah". My grandfather is 80 years old and has made it clear email is the only thing he will ever use a computer for! Thanks!

  Read the article

• Do I need a Gigabit router with a 24MB/s down and 7MB/s upload speed cable modem?

  - by djangofan

  Do I need a Gigabit port capable wireless router with a 24MB/s down and 7MB/s upload speed cable modem? Does anyone know how to calculate this? FYI, I wont be using the wireless connection from my main computer system. My computer will connect via a hard wire into the router (of the wireless variety), which in turn is connected to the cable modem. My research suggests that the 100 MB/s port can easily handle it. Is that true?

  Read the article

• Server IP must be a LAN IP (Port Forwarding Netgear)

  - by rphello101

  I'm trying to set up a server (Apache) on my computer (fairly new to it). As I understand it, for it to be accessible to other computers, I need to forward port 80. When I try to forward the port though, I get the error: Server IP must be a LAN IP. I noticed in ipconfig that my default gateway is different than my wireless router. My computer is not hardwired, not on WiFi. Furthermore, I do not, at this point, have a static IP. I read that it should still work with a dynamic IP until it changes. Any ideas on what I can do?

  Read the article

• is wisdom of what happens 'behind scenes' (in compiler, external DLLs etc.) important?

  - by I_Question_Things_Deeply

  I have been a computer-fanatic for almost a decade now. I've always loved and wondered how computers work, even from the purest, lowest hardware level to the very smallest pixel on the screen, and all the software around that. That seems to be my problem though ... as I try to write code (I'm pretty fluent at C++) I always sit there enormous amounts of time in front of a text-editor wondering how every line, statement, datum, function, etc. will correspond to every Assembly and machine instruction performed to do absolutely everything necessary for the kernel to allocate memory to run my compiled program, and all of the other hardware being used as well. For example ... I would write cout << "Before memory changed" << endl; and run the debugger to get the Assembly for this, and then try and reverse disassemble the Assembly to machine code based on my ISA, and then research every .dll, library file, linked library, linking process, linker source code of the program, the make file, the kernel I'm using's steps of processing this compilation, the hardware's part aside from the processor (e.g. video card, sound card, chipset, cache latency, byte-sized registers, calling convention use, DDR3 RAM and disk drive, filesystem functioning and so many other things). Am I going about programming wrong? I mean I feel I should know everything that goes on underneath English syntax on a computer program. But the problem is that the more I research every little thing the less I actually accomplish at all. I can never finish anything because of this mentality, yet I feel compelled to know everything... what should I do?

  Read the article

• How to move partition with Users to a new SATA controller?

  - by Al Kepp

  Our current situation: X79 chipset. Windows 7 installed on SATA SSD running on Marvell controller. C:\Users contains just Public and computer-name folders, all the other users are created in E:\Users. That partition is on two HDD's running on an Intel RAID controller. (The motherboard has got two SATA/RAID onboard controllers.) The goal is: Without reinstallation, I want to move SSD to a standard SATA controller. Then I want to get rid of RAID1, and move one HDD to the same internal Intel SATA controller and the current E:\Users move to that new place. I want it to stay as E:\users, but I need to reinstall the HDD to let it work in SATA mode without RAID. So I face several problems. I am sure all are solvable with free software utilities, but I don't know how exactly to do it. I can see the particular problems: I have got all users at E:\Users. When I turn off that E:\ disk, I won't be able to login to Windows. I need at least one admin account to be placed back at C:\users. The current C: runs on standard 120 GB SSD, but it is connected to a Marvell SATA/RAID controller. I am affraid the Windows won't let me put it to Intel SATA controller due to hardware/licence check, and I won't be able to use standard W7 recovery disk either, because there probably isn't marvel SATA/RAID driver on it. I haven't tried anything yet, because I am affraid I can end up with computer not working at all. (I want to move it to a standard ICH10 Intel SATA controller to let us have no problems in future with it. I think it is not very safe when we use any nonstandard hardware to boot the computer.) I need to somehow backup current E:\ disk and restore it to a new E:. I hope this will be the easy part (as long as the admin account will reside on C:). The E: RAID array is very large, but it is almost empty (less than 100 GB of data.) So I can make the partition smaller so it can easily fit to a single SATA HDD.

  Read the article

• Can I change from BIOS IDE mode to AHCI mode at any time?

  - by Software Monkey

  Currently my Windows 7 computer is crashing during startup, after loading the AMD achix64s.sys driver, if I enable BIOS AHCI mode for the disks. It boots fine with IDE mode. Since I need my computer working, I am wondering if I can just use IDE mode for now, and later change to AHCI mode, when I figure out what is wrong. Background: I was running RAID mode, which needed additional drivers to install/boot Windows. But the MoBo RAID is flaky so I'm trying to switch to using a Windows mirrored volume instead - for that I expected to use AHCI mode.

  Read the article

• Changing Word mail merge data source locations in bulk?

  - by Daft Viking

  I've just moved a number of Word mail merge files, and a number of Excel spreadsheets that are the data sources for the mail merges, from a Windows XP computer to a Windows 7 computer, and now all the paths for the merge sources are incorrect (used to be c:\documents and settings\user\my documents.... now c:\users\documents....). While I can correct the path of the data source in each file individually, I was hoping that there would be some way of updating the files in bulk, as there are a relatively large number of them. Word 2007 is what is being used, but the documents are all in the previous DOC format (not DOCX).

  Read the article

• virtual hosts on lighttpd can't load

  - by Jake

  Thats what I did: Added following code to lighttpd.conf $HTTP["host"] =~ "(^|\.)test\.com$" { server.document-root = "/home/test" } created /home/test Restarted Lighttpd but it doesn't load anything Google chrome Error: No data received Unable to load the webpage because the server sent no data. Here are some suggestions: Reload this webpage later. Error 324 (net::ERR_EMPTY_RESPONSE): The server closed the connection without sending any data. Firefox: The connection was reset The connection to the server was reset while the page was loading. The site could be temporarily unavailable or too busy. Try again in a few moments. If you are unable to load any pages, check your computer's network connection. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web. can you please explain How can I fix this? Really Thanks

  Read the article

• Is Windows Server 2003 on 96 MB possible?

  - by Nifle

  I have an old laptop, a Pentium II with 96 MB. I have had Windows 2000 on it for ages, it was slow but usable. But now I have to upgrade since I can't get my USB-wlan drivers to install (the old PCMCIA network card broke). I would prefer to install Windows XP but I have no spare licence, but I do have a Windows Server 2003 licence. Do you think it's possible (and usable) to squeeze in 2003 on this computer? Edit: Unfortunately 2003 simply refuses to install on the laptop. It hangs with an error message (paraphrased) 2003 has detected a problem with your computer and has halted the installation to prevent damage. And then some error codes This happens very early in the installation while it's copying the installation files just after I accepted the licence. So I give up for now.

  Read the article

• How to set the network profile of Windows 7 via group policy?

  - by Ricket

  We are deploying client computers and in testing noticed that the first time the user logs into the computer, it asks them if the location is a home, work, or public location. We are worried that some users in our workplace might misread it (or not read it at all) and click Public, thus likely denying our access to the computer and messing up security settings and such. Can we set our network to be a "Work Network" location via group policy or some other mechanism of our Windows Domain so that the user is not prompted when connected to our network? Also these are laptops, so we don't want every network they connect to be set as work network, and we have several access points (wired and three wireless) which our users often switch between so I'm not yet sure if it reprompts with each access point but I have the feeling it will, and I would like all of these to be set to the Work profile type.

  Read the article

• How to merge several detached signatures from different people into one?

  - by Petr Pudlák

  A group of people wants to publish a file and they all want to digitally sign the file as different recipients of the file will have different chains of trust. For simplicity, it's desired that there is only one detached signature file with all the signatures, so that the recipients don't need to check them one by one: foo.tar.gz foo.tar.gz.sig However, for security reasons, every person needs to perform the signing on their computer, it's not possible to create the combined signature by having multiple private keys on one computer and performing the operation with one command. Is it possible with GPG to somehow merge detached signatures of a file from multiple participants?

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >