Search Results

Search found 7502 results on 301 pages for 'defective hardware'.

Page 204/301 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• Solaris 10: Identify a PID and the CPU it's running on

  - by Marcus

  I have multiple instances of a database running on a Solaris system. I'd like to prove that each database process is being handled by a different CPU. Essentially, I want to be able to do something like a ps -ef | grep <process_name> to get the PIDs and then run another command (if required) to identify the CPU... Is prstat able to do this? I'm making an assumption that as each database instance is started each one uses a different CPU. I'm not sure if I'm understanding this correctly... The reason I want to do this is because Sun hardware has slow CPU's, but lots of them. Therefore, to get the best performance out of it, I need to try and spread the load among CPU's... Thanks

  Read the article

• Can a RAID disk setup crash if only 1 hard disk fails?

  - by Steve Rodrigue

  I am a web developer. I have not much experience in hardware. For this reason, I use managed servers. This morning, one of the drives in our setup failed. However, the full site went down. I asked my web host what happened and he replied that the hard disk failed in such a way that the RAID controller couldn't work properly. Do you guys ever seen that before? Is it possible? Thanks for any help on this guys. I need to know if my web host is honest with me. Steve

  Read the article

• Memory works fine separately, but not together

  - by patersonjs

  I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

  Read the article

• What is the best Linux distro for a php web server? [on hold]

  - by benjisail

  We are planning to upgrade our hardware and at the same time we plan to reinstall all our web server from a fresh OS. Currently our web server is running on CentOS 4.7 on a dedicated server. We are using Apache, Mysql, PHP, SVN, FTP and all the needed tools for a web server managed through SSH. We plan to use a cloud server for the new web server. I don't know which Linux distro to take for this new server. Should I stay with Centos and just take the latest release 5.4 or should I switch to something else like a Debian base distro (Ubuntu Server)? The thing that I didn't like with CentOS was the none availability of the latest version of PHP and Apache on Yum. This make it harder to keep our webserver updated with the latest technologies... Thanks for your help!

  Read the article

• ServerA can't access ServerB through UNC path. How do I troubleshoot?

  - by cparker4486

  All my servers are in the same domain on the same network. ServerA cannot access ServerB through UNC path. However DNS resolves correctly for ServerB from ServerA. For example "ping ServerB" works as expected. ServerB can reach ServerA through UNC path without any problem. Likewise all other servers and clients can reach ServerB through UNC path without any problem. The software firewall on ServerB is not turned on and there are no hardware firewalls getting in the way. This makes no sense and I don't know how to troubleshoot it. Nothing shows up in the event logs of ServerA and ServerB has one event (repeatedly): Event ID: 3019, Source: MrxSmb. ServerA is Server 2008 R2. ServerB is Server 2003 R2. I have other 2008 R2 servers that connect without any problem.

  Read the article

• Dell monitors keep blank after initial start

  - by offler

  We have Dell T1650 PCs with 2 nVidia graphic adapters / Windows 7 and 4 attached monitors. At initial start all screens are blank, the computer does not show anything. If powered off by pressing the hardware power button and then restarting all monitors show a picture. The Windows event log shows only the errors, that the machine was shut down unexpectedly. The last entry with blank screen seems to be that user specific dlls for every application are loaded. How can I find out the real problem?

  Read the article

• How to set a low process priority for everything spawned from a command prompt in XP?

  - by Binary Worrier

  As a developer, once or twice a week I run a full build on my XP dev machine. This will run at 100% cpu for 30 or 40 minutes, making my machine usless for anything other than basic browsing & email. Is there anyway I can specify that for a given process (i.e. a command prompt) it and any process spawned by it will hae a lower priority, say taking up no more than 60 - 70% of CPU, leaving my machine more usable. I don't mind the build talking 30 or 40% longer, if I still have use of my machine while it's running. Thanks BW P.S. I'd love to be able to throw more hardware at the problem, but that isn't under my control.

  Read the article

• Blurred refurbished TFT

  - by PeterMmm

  I got 3 refurbished PC+TFT 19". All TFT shows a very blurry image. I estimate the TFT's are 2-3 yrs old. The PC's running Windows7 Pro. The resolution is set to the TFT native values. It could be possible that all TFT's are broken but I have similiar models that are up to 5 yrs old, without any issue. I still think it could be a config issue but from the hardware it is possible that a TFT get broken I shows up a very blurry image. Update TFT HP 2035, grafic Intel Q35/GMA 3100, analog D-SUB connector, Manuf. date Sep 2005. Config. resolution 1600x1200, PPP 150% Without ClearType it is worst. Desktop Icon titles seems to be good and clear. But in Notepad for example the effect is that on the right of the characters is a pinky shadow.

  Read the article

• Web Server Setup

  - by gustyaquino

  Hello, In my workplace, we want to implement your own web server for at leat 100 Apache/PHP/MySQL web pages. My boss is opposed to hiring skilled personnel, he think we can do ourselves. Currently, we are working with hostgator reseller account. I chose CentOS as the operating system, but I don't know the best hardware solution. HP, Dell ? What about the setup on these platforms? Thanks. PS: sorry for my bad english Edit: The purpose of this migration isn't related to performance issues. But independence.

  Read the article

• Any recommendations on a NAS for a home-super-user?

  - by marc_s

  Can anyone recommend a good NAS for use in a home-server environment? I would request at least 2, preferably 4 disks, and I am most interested in good to excellent throughput for file-server and backup purposes - don't need any of the fancy media-streaming or -sharing features, that's not of interest to me. For a 4 or more disk solution, support for the various RAID levels (0, 1, 1+0, 5) would be a plus - especially if supported in hardware (rather than just a software emulation). I just need a place to put my collection of data, ISO images, and so forth - and since several external disks (self-built and off-the-shelf) have failed so far, I'm looking into a more reliable solution. Marc

  Read the article

• Security considerations when giving access to SQL Server db for a web application

  - by rem

  I need to expose our SQL Server 2008 database for an access from a asp.net web application. This is a new task for me, so I would like to know what basic security requirements are there for configuring software and hardware components of web server and DB Server. Is it OK to have both Web Server (Windows Server 2008) with IIS holding ASP.NET application and SQL Server 2008 on the same machine? Should I have to install additional firewall, like Forefront TMG? Should it be on separate computer? In case a web application is hosted on an external web hosting privider server and SQL Server DB on a our internal server what are "pro's" and "con's" of such configuration?

  Read the article

• What's a good box to serve files on my local network, cross platform?

  - by rogpeppe

  I've installed CAT5e cable and gigabit switches in my house with the goal of having an "always-on" file server in the loft, accessible to both my macbook and my partner's Windows box. I'd like to find a solution which: uses minimal power. allows me to access as much disk bandwidth as possible. provides glitch-free file access to both MacOS and Windows. is as cheap as possible, while remaining reliable. Optional, but desirable extras: software or hardware RAID; open source solutions. A SheevaPlug with eSATA seems one possibility, but I'm sure there are any number of other good options.

  Read the article

• Keeping the wireless connected.

  - by casr

  I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

  Read the article

• What are my options for booting OSX 10.6 when my DVD drive is broken?

  - by Kev

  I'm about to completely re-pave my Mac Mini but the DVD drive has died on me which means I can't boot from the installation media. I know I can boot from a USB stick but I don't have one available, what are my options given the following hardware at hand? Netgear ReadyNAS Duo NAS (NIC or USB only, no Firewire) USB HDD (no Firewire) I've ripped an ISO of the installation disk, can I somehow get the Mini to boot from this image using one of the above? If I decide not to re-pave but just upgrade, can the Mac be upgraded just using an OSX 10.6 ISO image on its disk?

  Read the article

• What causes Remote Desktop Services Manager to crash in Server 2008 R2?

  - by milkmood

  I have this consistent problem of RDSM crashing in Server 2008 R2. It is either really slow to open, sometimes never opens, or after it's been open and working properly for a bit, stops working, and forces an unload of the snap-in. It's done this since the deployment of this server, new hardware, new instance of S2k8. Domain Administrator login. I am using it to manage 3 Terminal Servers, the other two are S2k3. I've used it without issues on other 2008 servers.

  Read the article

• Using LDAP/Active Directory with PIN based authentication

  - by nishantjr

  We'd like to integrate our service with LDAP, but because of hardware constraints, we're only allow 4 digit user ids and passwords. What would be the best practice for performing such an authetication? We've considered adding User ID and PIN attributes to the LDAP user schema, but we're not sure how happy people would be with modifying their schema to interact with our service. The PIN attribute would have to have the same support that native user passwords have. (hashing and salting etc.) UPDATE Another consideration is how ldap_bind works with this scenario. How do we get it to use an alternate authentication method? Can this even be done without affecting other services that use the same LDAP server?

  Read the article

• How to effectively secure a dedicated server for intranet use?

  - by Mark

  I need to secure a dedicated server for intranet use, the server is managed so will have software based security, but what other security should be considered for enterprise level security? The intranet is a host for an ECM (Alfresco) managing and storing sensitive documents. As the information is sensitive we are trying to make it as secure as reasonably possible (requirement in UK law). We plan to encrypt the data on the database. It will be connected to via SSL encryption. Should we consider Hardware firewall, Private lan between the application server and database server?

  Read the article

• Can the Nikon D50 be hacked to record video?

  - by andy

  I mean hacked in terms of software only, and minor hardware hacking if necessary, without of course breaking the camera. Also, if possible, video should be able to be recorded at an acceptable frame rate, around 20fps. thanks p.s. Reason for this question: Just to give some context before people tell me to buy a new camera! For still photography I now almost exclusively shoot film with a Nikon F3, and my D50 is gathering dust. I want to shoot some video of my Capoeria classes, for personal use, and thought maybe I could put my D50 to good use. Yes, I could buy a D5000 or older D90, but really I just want to shoot some video with my nice wide Nikkor lenses at no extra cost!

  Read the article

• "SIOCSIFADDR: No such device" after restoring backup

  - by Paul Tomblin

  I bought some new hardware, and tried to restore my backup on it. When I boot, I don't get a network connection. If I type "ifup eth0" on the command line, I see the messages: SIOCSIFADDR: No such device eth0: No such device lspci shows an ethernet controller (Intel 82546GB). ifconfig does not show any controller except loopback. I tried installing bare Debian on the machine and the network worked then, but now I want to make it like my old machine was. Googling this problem only seems to find people having this problem in VMs. I'm not in a VM.

  Read the article

• Straight-forward to Virtualise with XEN or KVM on IBM Server System x3650 M4 791562G?

  - by ChrisZZ

  I want to built a virtualised Server Environment using XEN or KVM. The virtual machines should be purely debian systems - so XEN or KVM should be a sane choice. Now while buying servers, I am confronted with the fact, that the vendors obviously only support commercial solution. I think, on a good server, one should be able to install uncommercial software as well - but of course sometimes systems have hardware, that requires drivers, that are not found in the OS Community. So I am asked the question: Is it straight-forward to use Debian with IBM Server System x3650 M4 791562G with Debian - or even virtualising the IBM Server System x3650 M4 791562G using XEN or KVM. I am sure there will always be a way to achieve this goal - but this way might have a high milage - so I am not asking, whether this is theoretical possible, but whether this should be straight-forward and practically easy to do, no major headaches to be expected.

  Read the article

• good books about server architecture?

  - by ajsie

  when the traffic for a website grows i dont think one apache server in a vps is the way to go. i would like to know more about how i then should set up the server side architecture. im not that much into hardware stuff (what kind of cables to use, different cpu architectures etc), but interested in the software architecture: what servers (apache, nginx, squid, varnish etc) to use and how they interact with each other one server in one machine? how many mysql servers. how many apache, nginx servers and so on. how the "machine court" looks like. are there any good books about this area?

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• Graphics card for dual 2560 x 1440 output

  - by Bender

  As the title suggests I want to power two 2560 x 1440 monitors from one graphics card. I am just about to send my second graphics card back to Amazon, so before I purchase a 3rd incorrect card I thought I should get some advice. My latest card has dual DL-DVI output but only supports 2560 x 1440 on one output, the other maxes out at 1920 x 1080. Can graphics cards with two Dual Link DVI adapters (or alternately, one Dual Link DVI and one DisplayPort support the a full 2560 x 1440 on both monitors, or does that depend on the graphics hardware and not only the connectors?

  Read the article

• Turning a running Linux system into a KVM instance on another machine

  - by Charles

  I have two physical machines that I wish to virtualize. I can not (physically) plug the hard drives from either machine into the new machine that will act as their VM host, so I think that copying the entire structure of the system over using dd is out of the question. How can I best go about migrating these machines from their hardware to the KVM environment? I've set up empty, unformatted LVM logical volumes to host their filesystems, with the understanding that giving the VMs a real partition to work with achieves higher performance than sticking an image on the filesystem. Would I be better off creating new OS installs and rsyncing the differences over? FWIW, the two machines to be VM'd are running CentOS 5, and the host machine is running Ubuntu Server 10.04 for no particularly important reason. I doubt this matters too much, as it's still going to be KVM and libvert that matter.

  Read the article

• Where does traffic shaping typically take place?

  - by eekmeter

  As part of upgrading our network infrastructure we are looking to traffic shape our bandwidth since we only have about 3Mb down / 1 Mb up. We're looking to prioritize it so that web browsing gets priority and in the future some VOIP might be added in as well. Internal LAN traffic doesn't need to be controlled just our outbound connection. I've been looking at Cisco hardware and it seems that several of their products do shaping at the core switch, firewall, and router level. I'm wondering where does shaping normally take place? Is it normally done at the router, core switch, or firewall?

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >