Search Results

Search found 8759 results on 351 pages for 'grind core'.

Page 204/351 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

• How do you passthrough native SATA drives to a guest on ESXi?

  - by John

  I have ESXi 4.0 running on an Intel DX58S0 Mothboardboard with an Intel Core i7 930 processor. VT-d is also enabled. I have three drives in the system, drive 0 is used for ESXi. Drive 1 and 2 contain data from an older machine and show up under the "Storage Adapters" section in configuration. I would like to allow a guest machine to access the data on these drives (as nativly as possible). I have enabled passthrough of the motherboard's built in SATA controller (Intel/Marvell 88SE6121 ). This controller shows up in my guest OS, but the guest shows no drives aside from the normal virtual drive. I have tried a Linux guest and Windows7. I have also configured the host machine to try IDE/RAID/ACHI modes for the SATA controller. Any ideas how I can configure one of my guests to get at the raw data on these drives?

  Read the article

• NVIDIA Driver Crashing on Custom-Built Windows 7 PC

  - by srunni

  I've got a custom-built PC with these specs: Fractal Design Define R3 ASUS P8Z77-V motherboard Intel Core i7-2700k with Thermalright HR-02 Macho Cooler NVIDIA GeForce GTX 560 with Arctic Cooling Accelero Twin Turbo II Cooler Crucial M4 128 GB SSD 1 TB Hitachi HDD G.SKILL Ares Series 2x8 GB RAM (x2) SeaSonic 520W PSU Windows 7 Ultimate SP1 (x64) NVIDIA driver version 301.42 Upon building the PC, I overclocked the CPU (but never the GPU), and there were no problems for 1-2 months. Then I started getting crashes with this error when doing anything that's computationally or graphically intensive: I un-overclocked the CPU, but that hasn't fixed anything. This is what the inside of my case looks like: I'd appreciate any guidance on resolving this problem. I did get some of the thermal paste on the graphics card when installing the aftermarket cooler, but there were no issues for a month or two. Update I did a clean install and the issue persisted - looks like it's a hardware issue. I will try removing/cleaning/reseating all the parts.

  Read the article

• Windows 2012 - WDS unattend Partition

  - by joe

  I'm trying to install Windows 2012 via Windows 2012 WDS. The installer displays the following error message: the partition selected for the installation (1) does not exist on disk 0. Make sure the unattend answer file's imageselection \installimage setting references a valid partition on this computer, and then restart the installation. the unattend file (created by the "Create Client Unattend" dialog) <unattend xmlns="urn:schemas-microsoft-com:unattend"> <settings pass="windowsPE"> <component name="Microsoft-Windows-Setup" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="x86"> <WindowsDeploymentServices> <Login> <WillShowUI>OnError</WillShowUI> <Credentials> <Username>administrator</Username> <Domain>test</Domain> <Password>xxxx</Password> </Credentials> </Login> <WillWipeDisk>true</WillWipeDisk> <DiskConfiguration> <WillShowUI>OnError</WillShowUI> <Disk> <DiskID>0</DiskID> <WillWipeDisk>true</WillWipeDisk> <CreatePartitions> <CreatePartition> <Order>1</Order> <Type>Primary</Type> <Extend>true</Extend> </CreatePartition> </CreatePartitions> </Disk> </DiskConfiguration> <ImageSelection> <WillShowUI>OnError</WillShowUI> <InstallImage> <ImageGroup>ImageGroup1</ImageGroup> <ImageName>Windows Server 2012 SERVERDATACENTER</ImageName> <Filename>install-(4).wim</Filename> </InstallImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>1</PartitionID> </InstallTo> </ImageSelection> </WindowsDeploymentServices> </component> <component name="Microsoft-Windows-International-Core-WinPE" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="x86"> <SetupUILanguage> <UILanguage>en-US</UILanguage> </SetupUILanguage> <InputLocale>en-US</InputLocale> <SystemLocale>en-US</SystemLocale> <UILanguage>en-US</UILanguage> <UserLocale>en-US</UserLocale> </component> <component name="Microsoft-Windows-Setup" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="amd64"> <WindowsDeploymentServices> <Login> <WillShowUI>OnError</WillShowUI> <Credentials> <Username>administrator</Username> <Domain>test</Domain> <Password>xxxxx</Password> </Credentials> </Login> <ImageSelection> <WillShowUI>OnError</WillShowUI> <InstallImage> <ImageGroup>ImageGroup1</ImageGroup> <ImageName>Windows Server 2012 SERVERDATACENTER</ImageName> <Filename>install-(4).wim</Filename> </InstallImage> <InstallTo> <DiskID>0</DiskID> <PartitionID>1</PartitionID> </InstallTo> </ImageSelection> </WindowsDeploymentServices> </component> <component name="Microsoft-Windows-International-Core-WinPE" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS" processorArchitecture="amd64"> <SetupUILanguage> <UILanguage>en-US</UILanguage> </SetupUILanguage> <InputLocale>en-US</InputLocale> <SystemLocale>en-US</SystemLocale> <UILanguage>en-US</UILanguage> <UserLocale>en-US</UserLocale> </component> </settings> </unattend> Any idea why it is not working? thanks

  Read the article

• 250k connections for comet with node.js

  - by Nenad

  How to implement node.js to be able to handle 250k connections as comet server (client side we use socket.io)? Would the use of nginx as proxy/loadbalancer be the right solution? Or will HA-Proxy be the better way? Has anyone real world experience with 100k+ connections and can share his setup? Would a setup like this be the right one (Quad core CPU per server - start 4 Instances of node.js per Server?): nginx (as proxy / load balancing server) / | \ / | \ / | \ / | \ node server #1 node server #2 node server #3 4 instances 4 instances 4 instances

  Read the article

• Getting BootMgr not found errors repeatedly on Win7 x64

  - by abszero

  So here is the basic configuration of the box: Primary RAID 1 (Mirror, Bootable): 2x 300GB WD SATA drives AMD Phenom Quad Core x64 @2.2 ASUS M3N78 Pro Board 4GB RAM Win 7 Ultimate Additionally, this box is a Host OS for several CentOS Boxes via VirtualBox. The box runs like a champ but, for whatever reason, everytime I restart the machine I get a BootMgr not found error when the box tries to boot. I pop in my Win DVD, select 'Repair Windows' then 'Fix Start Up Problems' and everything works fine...once. When I restart the box again I have to go back through this process. Any ideas on what is going on?

  Read the article

• Facing gestures in Linux mint Chrome Browser

  - by aravind.udayashankara

  I am using Linux mint OS since an Year , I use to consistently download updates and install , I use chrome as a default browser , when ever I open youtube and watch some video , I listen to some gestures in sound ( say repeated lyrics of song ) while it is playing , In firefox it is working fine . What is the problem am I missing any plugin , AFAIK Chrome doesn't need a flash player plug in , It has a built in flash player . IS that the problem ? And also previously I was not facing this , recently I started using Cinimon UI centOS after this all these kind of problems started MY hard ware is 64 bit intel core i3 and also I have installed linux mint 64 bit Please let me know what is the problem and how to fix this . Thanks in advance for responding to this post

  Read the article

• Why does my CPU Usage reach 100% too often?

  - by deathlock

  I'm using a dual-core processor and often see my CPU usage reaches 100%. I realize this may happen if I'm running too much applications, so when I know the computer starts to run slowly, I start to close my applications. I usually run 4-5 applications simultaneously. Usually those are: web browser (Google Chrome), Adobe Photoshop, Notepad++, XAMPP, and Windows Task Manager. Usually I close tabs in my Chrome first, because I often browse the net with about 20 tabs/4 windows open, so I presume that would take much memory (bad habit, I know). But even after closing Chrome's tabs or closing other applications, my CPU Usage often stays at high percentage - 72% at best, 100% at worst. I check the Processes tab on Windows Task Manager and usually found the System, System Idle Process, or services.exe taking the highest CPU process (could reach 60). Why is this happening? And is there any solution? EDIT I have T2250 @ 1,73 Ghz and 2.5 GB RAM

  Read the article

• Xnest from Mac OSX to HP UX

  - by Burbas

  Hi, I'm trying to connect to my HP/UX machine from Mac OS X using Xnest. The problem is that I can not get the keyboard to work. I can see the login-prompt, but unable to type in my username. The connection is done by: Xnest :1 -query 192.168.0.193 -geometry 1280x1024 and it gives me some errors: (EE) AIGLX error: dlopen of /usr/X11/lib/dri/swrast_dri.so failed (dlopen(/usr/X11/lib/dri/swrast_dri.so, 5): image not found) (EE) GLX: could not load software renderer (EE) XKB: Couldn't open rules file /usr/X11/share/X11/xkb/rules/base (EE) XKB: No components provided for device Virtual core keyboard Couldn't get keyboard. I hope there is someone here who might have the answer :-).

  Read the article

• How to understand cpu family/model/stepping fields in /proc/cpuinfo [closed]

  - by Victor Sorokin

  I have following in cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 107 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5600+ stepping : 2 According to Wikipedia page there are two kinds of 5600+ -- one of 90nm technology, another of 65nm. How can I understand which one I have? There seem to be no direct correspondence between contents of cpuinfo and info on Wikipedia page. AMD site seems to use some other naming scheme for processors too. How can I map values of family, model and stepping from cpuinfo to the data available on Wikipedia/AMD?

  Read the article

• Hyper-V and host-installed hardware devices: can guest VMs access?

  - by gravyface

  Have a couple of servers I'd like to setup as Hyper-V Servers, with a couple of Windows 2008 Standard VMs. On the host, we have a few hardware devices we'd like to be accessible to the guest; I'm not sure if these are supported via a raw "pass-thru" on Hyper-V (which I don't have alot of experience with) if the same drivers are installed on the guest. Hardware in question is a Brooktrout fax card, a SCSI adapter for the tape drive, and a 9-pin serial connected to one of the core firewalls for management.

  Read the article

• How to identify which website on my instance is receiving lots of traffic?

  - by Bob Flemming

  I am new to server administration and have just setup a new quad core instance which hosts around 15 websites. Over the past couple of days my server load has been averaging at around 15.00. I believe it is because of one (or maybe more) websites are getting spammed by spambots. Typing 'top' at the command line shows many processes from user 'www-data' which indicates lots of web traffic. Is there an easy way identify which one of my sites is taking a hammering? Reading the apache error logs is a very difficult tasks as most of the websites receive daily traffic of 10,000 + unique users. Any help would be appreciated!

  Read the article

• smartOS HPC config suggestion

  - by Andrew B.

  I'm configuring a brand new HPC server and am interested in using SmartOS because of it's virtualization control and zfs features. Does this configuration make sense for a SmartOS HPC, or would you recommend an alternative? System Specs: 2x 8-core xeon 384 GB RAM 30 TB HDs with 2x512GB SSDs Uses: - zfs for serving data to different vms, and over the network; 1 SSD for L2ARC and 1 for ZIL - typically 1-2 ubuntu instances running R and custom C/C++ code My biggest concerns as a newbie to SmartOS and ZFS are: (1) will I get near-metal performance from ubuntu running on SmartOS if it is the only active vm? (2) how do I serve data from the global zfs pool to the containers and other network devices?

  Read the article

• Another "Trouble copying music files from HD to 16GB thumb drive"

  - by Ron

  I have a brand new HP Quad Core - 6GB Ram - running 64-bit Windows 7. Running Norton Internet 2010. I try copying music files from HD to 16 GB thumbdrive and get blue screen after a few files have transfered over to thumbdrive. Computer blinks once and boom - blue screen and then reboots. This is really aggravating. I stopped anti-virus, pulled other USB attached devices - still does same thing. Any solutions out there?

  Read the article

• nagiosgraph new services not showing

  - by Eleven-Two

  I am using Nagios Core with Nagiosgraph and had only enabled graphing for cpu usage for a while. This worked fine, but now i wanted to add some more services (for example memory usage). The new services are not working (no rrd data is generated). The Nagiosgraph site only says "no data available" and I get no error in apache log, nagiosgraph.log or nagiosgraph-cgi.log. The new services are standard services (nsclient++ MEMUSE for example) and of course they are included in the map file. If I execute the checks manually, it shows also the perfdata. I added the services by enabling the "graphed-service" use. Did I miss something?

  Read the article

• safari 5 doesnt work on my computer.

  - by Amairani409

  I just got the new version of safari y downloaded because my mac tell me there was new version that I should be getting. but when I try to run my this new version of the aplication .nothing happends¡ I mean the program seems to be working but nothing apears in the screen and so when I try to see my top sites a little window show up but it just dont show anything. then 3 seconds later the program shut down¡ I dont know why is happening this Im not so a expert in computers but this really is away of all I see on safari and on mac I got Mac OS X version 10.5.8 2.66ghz intel core 2 duo 4gb 1067 MHz DDR3

  Read the article

• JAVA vs .NET Technology - Way 2 go Futher

  - by Sarang

  I have my subject .net acedemically. I also learned core-java and did a project as well. I took training from a java firm. Now, as a skill I do have knowledge as both language. But, it is creating a large problem to me that, which field I should chhose? Even if having better OOP funda, will it be easier for me to transfer from one-another in future ? Please suggest me a way. Also, we do have may technologies available at both side, like JSP, JSF, J2ME, Share Point, SilverLight etc. Which is better as per their reliabity point of view? Which are fast growing and useful technologies used mostly in current IT corporate world ? Are they easier to learn at fresher's point of view? Please answer. Perhaps, this answer may help me mostly to create my way to learn them and go further.

  Read the article

• Sound card issues (High Definition Audio Controller)

  - by Prakash R

  I have a 5-year-old Acer Aspire 4520. Until a month back it was working beautifully on Windows 7 32bit. But then out of the blue, the sound stopped working. I've tried reinstalling the OS 3-4 times. The sound came back a couple of times, but it stopped working after a reboot. Even after installing the sound drivers, I don't see any entry in the Playback tab of the Sound applet in Control Panel. I see a High Definition Audio Controller entry in Device Manager. I disabled and uninstalled it, but Windows reinstalls it automatically. I'll share specific hardware details if anybody here needs to know. The processor is "AMD Athlon(tm) 64 X2 Dual-Core Processor TK-55". Any help would be appreciated.

  Read the article

• Enable a program in Windows to run multiple times?

  - by user135490

  I've got this legacy software that only allows you to run one copy at a time, it detects that you have another session opened and it won't allow you to open a second instance. The problem is this is a cpu intensive program and it only use a single core. Is there any hacks or tweaks so I can trick it and open more than one instance? This would allow me to retire about 5 servers... I'm using Windows 2008 R2. I had to use cff explorer to enable the use more than 2GB RAM as the program crashes when it tries to use more than 2GB.

  Read the article

• My laptop suppose to have 6 GB ram but it's only 2 GB installed

  - by monablo

  My laptop is supposed to have 6 GB ram but it only detects 2 GB of it, so I don't know what to do. I searched the web for answer and what i get that there's 2 possible problem: 1- That 4 GB ram card is broken and not working 2- or the 2 ram card have a different path so the windows chose the path of the smaller ram card which would be the 2 GB ram I don't know what is the path in first place so I really don't know what to do. How would I troubleshoot, and work out why the 4 GB stick is not being detected? My laptop's specifications are as follows: Windows 7 Home premium 64- bit Operating system processor : intel (R) core(TM) i7 CPU Q740 @1.73 GHz 1.73GHz installed memory(RAM) : 2.00 GB (but it suppose to be 6 GB -_- ) My laptop is Dell and it's Model N5010

  Read the article

• Which modules can be disabled in apache2.4 on windows

  - by j0h

  I have an Apache 2.4 webserver running on Windows. I am looking into system hardening and the config file httpd.conf. There are numerous load modules and I am wondering which modules I can safely disable for performance and / or security improvements. Some examples of things I would think I can disable are: LoadModule cgi_module others like LoadModule rewrite_module LoadModule version_module LoadModule proxy_module LoadModule setenvif_module I am not so sure they can be disabled. I am running php5 as a scripting engine, with no databases, and that is it. My loaded modules are: core mod_win32 mpm_winnt http_core mod_so mod_access_compat mod_actions mod_alias mod_allowmethods mod_asis mod_auth_basic mod_authn_core mod_authn_file mod_authz_core mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_dav_lock mod_dir mod_env mod_headers mod_include mod_info mod_isapi mod_log_config mod_cache_disk mod_mime mod_negotiation mod_proxy mod_proxy_ajp mod_rewrite mod_setenvif mod_socache_shmcb mod_ssl mod_status mod_version mod_php5

  Read the article

• Why does Windows 7 x64 work faster than an x86 edition on my PC?

  - by Jasper

  Why does Windows 7 x64 work faster than an x86 edition on my PC even though I mostly use x86 things in it? What's wrong with me, and what am I missing? Majority of the things I use is x86 (e.g. DAWs, games, media players). A considerable amount of them, however, are x64 (although their x86 counterparts work just fine). I've tried using the same things on the same system but always ended up finding Windows 7 x64 working slightly faster than x86. I'm very observant. I even notice the tiniest window animations. System: Windows 7 Ultimate x64 CPU: Intel Core 2 Duo E7500 @ 2.93 GHz RAM: 2 GB x 2 = 4 GB DDR2 @ 332 MHz Motherboard: Intel D945GCNL Graphics: ATI Radeon HD 4350 @ 1 GB Dedicated Audio: M-Audio FastTrack Pro HDD: Samsung HD753LJ 733 GB & Samsung HD160JJ 156 GB As you can see, my system is old.

  Read the article

• Gitosis installation of public key not working...

  - by user29600

  I've been following this tutorial to install and setup git on Ubuntu Server 10.04 using Windows 7 as a client. However, after finally figuring out how it works (executed gitosis-init a bunch of times on the wrong key), I copied the id_rsa.pub file over to the server in /tmp folder and ran it again. Unfortunately it still doesn't work and when I execute git clone [email protected]:gitosis-admin.git it asks for gitosis's password rather than the RSA Passphrase. I'm assuming is the same problem this guy is having here... however, after following his instructions: Purge git-core and gitosis and manually remove the /srv/gitosis folder and following the instructions again (with the proper id_rsa.pub file this time), I'm still having the same issue. Anyone know what I'm doing wrong? Is there any way to probe for more information that might help in solving this?

  Read the article

• oracle virtualbox doesn't work for host Kubuntu since Lucid Lynx 10.04

  - by 13east

  I have a thinkpad edge 14 core i3 2.4 ghz and 4g ram; I have tried kubuntu 10.04, 10.10, 11.10, 12.04 and 12.10 (all x64 architecture); Both oracle and ose virtualbox only works properly to install XP and windows 7 quest system on kubuntu 10.04; For every other kubuntu release since, the guest installation goes as far as formatting the virtual drive, freezes at this step, and doesn't even go as far as copying files to hard-drive to begin installation. But virtualbox has not stopped responding to commands; I can kill that one specific window with the problem installation ("machine" - "close" - "power off the machine") and start over again without having to force-kill virtualbox application. If anyone knows how I can go about addressing this problem, any help you can provide would be very much appreciated. Thank You.

  Read the article

• USB Hub powers down in sleep mode on Win 7 64

  - by Andy B

  This question has been asked before but not answered. I would like the USB hub to remain on in sleep so I can wake up the laptop from an external keyboard and mouse. I have set all the device drivers by unchecking allow this device to be powered down and disabled selective suspend in control panel but the hub still powers down. If I plug a keyboard or mouse directly in to the PC they remain powered and wake the computer its only when they are connected through the hub there is a problem. I have another PC running Win 7 32. If I set this up in exactly the same way the hub remains powered in sleep. Both PC's are Toshiba Satellites with multi-core celerons but one runs Win 7 32 the other Win 7 64. BIOS settings are the same. Any help would be appreciated even confirmation that this is a feature of Win 7 64.

  Read the article

• Bad HD video deinterlacing processing

  - by Guy Fawkes

  I have Ubuntu 12.04 32-bit with Unity. My system configuration is: CPU: Core 2 Quad Q6600 (2.4 GHz) RAM: 8192 Mb DDR2 Kingston Video: Palit GeForce GTX 260 216 SP, and my screen resolution is 1680x1050. I also have Window 7 Ulitimate installed, and I can see the same files in Media Player Classic without any horizontal lines. I've installed vdpau driver, NVIDIA drivers 304.51, and MPlayer 2 (within SMPlayer). I've disabled "Sync to VBlank" option in CCSM (because in other way, by default, MPlayer process use about 50-60 percents of my processor load), tried to swich between different deinterlace options in SMPlayer, used "-vc ffh264vdpau,ffmpeg12vdpau" (without quotes) parameters for MPlayer, switched to "Ubuntu 2D", but, finally, have no results. Any suggestions? How must I to set up MPlayer?

  Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >