Search Results

Search found 21960 results on 879 pages for 'program termination'.

Page 204/879 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

  • Opencv application crashes at runtime with error code 0x0000142

    - by Tuan Anh
    I have openCV and minGW installed with codeblock IDE following the instructions found here http://kevinhughes.ca/tutorials/opencv-install-on-windows-with-codeblocks-and-mingw/ i tried the simple image loading program in the article and the build process went fine. but when i tried running the output program, it crashes with the error message "the application was unable to start correctly (0xc0000142). Click OK to close the application." I used Dependency Walker to see if the program failed to load dll module and here's the output screen of Dependency Walker https://www.dropbox.com/s/f9iaftdt8atjwpl/Screenshot%202013-11-05%2022.21.45.png i am not used to DW but as i can see in its output screen, some openCV dll failed to load and the loaded Windows DLL were 64 bit instead of 32 bit (as minGW is 32 bit). I can't figure out why as i already configure the Path environment variable for the bin directory of openCV and the app still can not load the dll modules. And i think that Windows will automatically load the proper 32 bit DLLs when a 32 bit app is run but this situation the app still failed to load. Anyone has ideas?

    Read the article

  • Using Fantom USB Driver from JNI

    - by Starky
    I'm having some difficulty with JNI. I'm using JNI to call some Java methods from a C++ program. This implementation of JNI is working fine. The goal of the Java program is to send commands over USB to a LEGO robot using LEJOS. This works fine when running the Java program by itself but for some reason when I call the methods from C++ the robot cannot be detected. My only lead so far is that there may be some problem using the Fantom USB driver from a JNI call. This is the driver that's used for the USB connection to the robot. I've had a quick look at the code for the driver and it looks like it makes use of JNI too. So I guess I'm asking the following things: What differences could there be between calling code from JNI and executing it through command prompt with the 'java classname args' method which could cause this problem? Could it be that there is some problem with me using JNI in C++ when the driver that's being used uses JNI as well? I won't post any code just now as I don't think it's really relevant but if anyone thinks that they need to see it then I can add it.

    Read the article

  • C# - Help with LINQ

    - by cmaduro
    I need to check if a certain property exists within a class. Please refer to the LINQ query in question. For the life of me I cannot make the compiler happy. class Program { static void Main(string[] args) { ModuleManager m = new ModuleManager(); IModule module = m.FindModuleForView(typeof(HomeView)); Console.WriteLine(module.GetType().ToString()); Console.ReadLine(); } } public class ModuleManager { [ImportMany] public IEnumerable<Lazy<IModule>> Modules { get; set; } [ImportMany] public IEnumerable<Lazy<View>> Views { get; set; } public ModuleManager() { //An aggregate catalog that combines multiple catalogs var catalog = new AggregateCatalog(); //Adds all the parts found in the same assembly as the Program class catalog.Catalogs.Add(new AssemblyCatalog(typeof(Program).Assembly)); //Create the CompositionContainer with the parts in the catalog _container = new CompositionContainer(catalog); //Fill the imports of this object try { this._container.ComposeParts(this); } catch (CompositionException compositionException) { Console.WriteLine(compositionException.ToString()); } } public IModule FindModuleForView(Type view) { //THIS IS THE PROBLEM var module = from m in Modules where ( from p in m.Value.GetType().GetProperties() where p.GetType().Equals(view) select p ) select m; } public CompositionContainer _container { get; set; } } public interface IModule { } [Export] public class HomeModule : IModule { public HomeModule() { } [Export] public HomeView MyHomeView { get { return new HomeView(); } set { } } } public class HomeView : View { } public class View { }

    Read the article

  • update variable based upon results from .NET backgroundworker

    - by Bruce
    I've got a C# program that talks to an instrument (spectrum analyzer) over a network. I need to be able to change a large number of parameters in the instrument and read them back into my program. I want to use backgroundworker to do the actual talking to the instrument so that UI performance doesn't suffer. The way this works is - 1) send command to the instrument with new parameter value, 2) read parameter back from the instrument so I can see what actually happened (for example, I try to set the center frequency above the max that the instrument will handle and it tells me what it will actually handle), and 3) update a program variable with the actual value received from the instrument. Because there are quite a few parameters to be updated I'd like to use a generic routine. The part I can't seem to get my brain around is updating the variable in my code with what comes back from the instrument via backgroundworker. If I used a separate RunWorkerCompleted event for each parameter I could hardwire the update directly to the variable. I'd like to come up with a way of using a single routine that's capable of updating any of the variables. All I can come up with is passing a reference number (different for each parameter) and using a switch statement in the RunWorkerCompleted handler to direct the result. There has to be a better way.

    Read the article

  • unable to use turboc through xp. why? solution?

    - by Fizz
    hi, im having problems opening directly turboc++ compiler(dos version) on xp. if i d-click on the tc icon through windows gui it opens for a sec(a blank dos screen) and shuts down. so i hv to acces through cmd and then adress of turboc and tc i.e., cmd (enter) c:\tc\bin (enter) tc.exe this way tc opens and im able to program all text programming.. why do i have to always start tc through dos..why can't i start it through xp. also,after starting tc through dos, im unable to execute any graphics program through it.. i write a simple code for creating a circle using predefined functions.. all directories have been set as per req. when i compile and run the prog. tc exits and returns to dos cmd prompt. why does this happen? solution? i hv also tried using dos box to run turboc. it closes automatically on executing the grapics program.. plzz help...

    Read the article

  • python: nonblocking subprocess, check stdout

    - by Will Cavanagh
    Ok so the problem I'm trying to solve is this: I need to run a program with some flags set, check on its progress and report back to a server. So I need my script to avoid blocking while the program executes, but I also need to be able to read the output. Unfortunately, I don't think any of the methods available from Popen will read the output without blocking. I tried the following, which is a bit hack-y (are we allowed to read and write to the same file from two different objects?) import time import subprocess from subprocess import * with open("stdout.txt", "wb") as outf: with open("stderr.txt", "wb") as errf: command = ['Path\\To\\Program.exe', 'para', 'met', 'ers'] p = subprocess.Popen(command, stdout=outf, stderr=errf) isdone = False while not isdone : with open("stdout.txt", "rb") as readoutf: #this feels wrong for line in readoutf: print(line) print("waiting...\\r\\n") if(p.poll() != None) : done = True time.sleep(1) output = p.communicate()[0] print(output) Unfortunately, Popen doesn't seem to write to my file until after the command terminates. Does anyone know of a way to do this? I'm not dedicated to using python, but I do need to send POST requests to a server in the same script, so python seemed like an easier choice than, say, shell scripting. Thanks! Will

    Read the article

  • How can I effectively test against the Windows API?

    - by Billy ONeal
    I'm still having issues justifying TDD to myself. As I have mentioned in other questions, 90% of the code I write does absolutely nothing but Call some Windows API functions and Print out the data returned from said functions. The time spent coming up with the fake data that the code needs to process under TDD is incredible -- I literally spend 5 times as much time coming up with the example data as I would spend just writing application code. Part of this problem is that often I'm programming against APIs with which I have little experience, which forces me to write small applications that show me how the real API behaves so that I can write effective fakes/mocks on top of that API. Writing implementation first is the opposite of TDD, but in this case it is unavoidable: I do not know how the real API behaves, so how on earth am I going to be able to create a fake implementation of the API without playing with it? I have read several books on the subject, including Kent Beck's Test Driven Development, By Example, and Michael Feathers' Working Effectively with Legacy Code, which seem to be gospel for TDD fanatics. Feathers' book comes close in the way it describes breaking out dependencies, but even then, the examples provided have one thing in common: The program under test obtains input from other parts of the program under test. My programs do not follow that pattern. Instead, the only input to the program itself is the system upon which it runs. How can one effectively employ TDD on such a project?

    Read the article

  • McAfee Virus Scan and Oracle RAC

    - by Lee Gathercole
    Hi, We're experiencing a strange problem with Oracle RAC and McAfee anti-virus. As part of the installation of the Oracle RAC we disable anti virus as directed. We have had our RAC running fine, but when we came to re-enable the AV and reboot we got the BSOD. Abnormal Program Termination (BugCheck, STOP: 0x00000035 (0x8E984678, 0x00000000, 0x00000000, 0x00000000 NO_MORE_IRP_STACK_LOCATIONS Following the standard process of raising this problem with Microsoft they identify the problem and also a fix. Microsoft talk about too many file filter drivers being present and pushing the DFS upper limit beyond the default size. Upping this value, as per msdn, has no impact. We're able to recover from this BSOD by disabling AV. We don't have the problem if we run the AV service manually whilst the system is up. However, if we make the service automatic we fail to boot. Tech Details 2 Node Oracle 10g Cluster 2 * Windows 2003 SP2, 16GB RAM, Quad Core 3ghz Processor SAN attached storage McAfee VirusScan Enterprise 8.5.0i, Scan Engine (5300.2777), DAT Version (5536.0000) Thanks Lee

    Read the article

  • Debugging strategy to find the cause of bad_alloc

    - by SalamiArmi
    I have a fairly serious bug in my program - occasional calls to new() throw a bad_alloc. From the documentation I can find on bad_alloc, it seems to be thrown for these reasons: When the computer runs out of memory (which definitely isn't happening, I have 4GB of RAM, program throws bad_alloc when using less than 5MB (checked in taskmanager) with nothing serious running in the background). If the memory becomes too fragmented to allocate new blocks (which, again, is unlikely - the largest sized block I ever allocate would be about 1KB, and that doesn't get done more than 100 times before the crash occurs). Based on these descriptions, I don't really have anywhere in which a bad_alloc could be thrown. However, the application I am running runs more than one thread, which could possibly be contributing to the problem. By testing all of the objects on a single thread, everything seems to be working smoothly. The only other thing that I can think of that is going on here could be some kind of race-condition caused by calling new() in more than one place at the same time, but I've tried adding mutexes to prevent that behaviour to no effect. Because the program is several hundred lines and I have no idea where the problem actually lies, I'm not sure of what, if any, code snippets to post. Instead, I was wondering if there were any tools that will help me test for this kind of thing, or if there are any general strategies that can help me with this problem. I'm using Microsoft Visual Studio 2008, with Poco for threading.

    Read the article

  • Build failed question - maven - jre or jdk problem

    - by Gandalf StormCrow
    Hi all, I have my JAVA_HOME set to C:\Program Files (x86)\Java\jdk1.6.0_18 After I run maven install I get this message from eclipse: Reason: Unable to locate the Javac Compiler in: C:\Program Files (x86)\Java\jre6\..\lib\tools.jar Please ensure you are using JDK 1.4 or above and not a JRE (the com.sun.tools.javac.Main class is required). In most cases you can change the location of your Java installation by setting the JAVA_HOME environment variable. I'm certain that this is the tricky part Please ensure you are using JDK 1.4 or above and not a JRE When I run configuration its set to JRE6, how do I change it to JDK 1.6 which I have already installed EDIT I even tried to modify the plugin : <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-compiler-plugin</artifactId> <version>2.0.2</version> <configuration> <source>1.6</source> <target>1.6</target> <executable>C:\Program Files (x86)\Java\jdk1.6.0_18\bin</executable> </configuration> </plugin> Still I get the same error Maybe I forgot to say I use eclipse maven plugin .. how can I change from JRE to JDK in eclipse ?

    Read the article

  • python raw_input odd behavior with accents containing strings

    - by Ryan
    I'm writing a program that asks the user for input that contains accents. The user input string is tested to see if it matches a string declared in the program. As you can see below, my code is not working: code # -*- coding: utf-8 -*- testList = ['má'] myInput = raw_input('enter something here: ') print myInput, repr(myInput) print testList[0], repr(testList[0]) print myInput in testList output in eclipse with pydev enter something here: má mv° 'm\xe2\x88\x9a\xc2\xb0' má 'm\xc3\xa1' False output in IDLE enter something here: má má u'm\xe1' má 'm\xc3\xa1' Warning (from warnings module): File "/Users/ryanculkin/Desktop/delete.py", line 8 print myInput in testList UnicodeWarning: Unicode equal comparison failed to convert both arguments to Unicode - interpreting them as being unequal False How can I get my code to print True when comparing the two strings? Additionally, I note that the result of running this code on the same input is different depending on whether I use eclipse or IDLE. Why is this? My eventual goal is to put my program on the web; is there anything that I need to be aware of, since the result seems to be so volatile?

    Read the article

  • Double Free inside of a destructor upon adding to a vector

    - by Shawn B
    Hey, I am working on a drum machine, and am having problems with vectors. Each Sequence has a list of samples, and the samples are ordered in a vector. However, when a sample is push_back on the vector, the sample's destructor is called, and results in a double free error. Here is the Sample creation code: class XSample { public: Uint8 Repeat; Uint8 PlayCount; Uint16 Beats; Uint16 *Beat; Uint16 BeatsPerMinute; XSample(Uint16 NewBeats,Uint16 NewBPM,Uint8 NewRepeat); ~XSample(); void GenerateSample(); void PlaySample(); }; XSample::XSample(Uint16 NewBeats,Uint16 NewBPM,Uint8 NewRepeat) { Beats = NewBeats; BeatsPerMinute = NewBPM; Repeat = NewRepeat-1; PlayCount = 0; printf("XSample Construction\n"); Beat = new Uint16[Beats]; } XSample::~XSample() { printf("XSample Destruction\n"); delete [] Beat; } And the 'Dynamo' code that creates each sample in the vector: class XDynamo { public: std::vector<XSample> Samples; void CreateSample(Uint16 NewBeats,Uint16 NewBPM,Uint8 NewRepeat); }; void XDynamo::CreateSample(Uint16 NewBeats,Uint16 NewBPM,Uint8 NewRepeat) { Samples.push_back(XSample(NewBeats,NewBPM,NewRepeat)); } Here is main(): int main() { XDynamo Dynamo; Dynamo.CreateSample(4,120,2); Dynamo.CreateSample(8,240,1); return 0; } And this is what happens when the program is run: Starting program: /home/shawn/dynamo2/dynamo [Thread debugging using libthread_db enabled] XSample Construction XSample Destruction XSample Construction XSample Destruction *** glibc detected *** /home/shawn/dynamo2/dynamo: double free or corruption (fasttop): 0x0804d008 *** However, when the delete [] is removed from the destructor, the program runs perfectly. What is causing this? Any help is greatly appreciated.

    Read the article

  • Why does my DataTemplate break the WPF designer?

    - by PRINCESS FLUFF
    Why does the DataTemplate line break the WPF designer in Visual Studio 2008? The program compiles and runs properly. The DataTemplate is applied as it should. However the entire DataTemplate block of code is underlined in red, and when I simply "build" the program without running, I get the error "Type reference cannot find public type named 'Character'" How come it can't find it in the designer yet the program applies the template properly? <UserControl x:Class="WPF_Tests.Tests.TwoCollecViews.TwoViews" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:DetailsPane="clr-namespace:WPF_Tests.Tests.DetailsPane" > <UserControl.Resources> <DataTemplate DataType="{x:Type DetailsPane:Character}"> <StackPanel Orientation="Horizontal"> <TextBlock Text="{Binding Path=Name}"></TextBlock> </StackPanel> </DataTemplate> </UserControl.Resources> <Grid> <ListBox ItemsSource="{Binding Path=Characters}" /> </Grid> </UserControl> EDIT: I am being told that this may be a bug in Visual Studio 2008, as it worked correctly in 2010. You can download the code here: http://www.mediafire.com/?z1myytvwm4n - The Test/TwoCollec xaml file's designer will break with this code.

    Read the article

  • ClassNotFoundException when connecting to Mysql with JDBC

    - by Jacob Lyles
    I'm getting the following error when I try to run a simple Java JDBC program at the command line: Exception in thread "main" java.lang.NoClassDefFoundError: LoadDriver/java Caused by: java.lang.ClassNotFoundException: LoadDriver.java at java.net.URLClassLoader$1.run(URLClassLoader.java:200) at java.security.AccessController.doPrivileged(Native Method) at java.net.URLClassLoader.findClass(URLClassLoader.java:188) at java.lang.ClassLoader.loadClass(ClassLoader.java:315) at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:330) at java.lang.ClassLoader.loadClass(ClassLoader.java:250) at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:398) Here's the simple Java program, copied right out of the JDBC docs: import java.sql.Connection; import java.sql.DriverManager; import java.sql.SQLException; // Notice, do not import com.mysql.jdbc.* // or you will have problems! public class LoadDriver { public static void main(String[] args) { try { // The newInstance() call is a work around for some // broken Java implementations Class.forName("com.mysql.jdbc.Driver").newInstance(); } catch (Exception ex) { throw ex; // handle the error } } } Problem is, I'm bloody sure my bash shell $ClASSPATH variable is pointed at the correct .jar file. To be sure, I copied the JDBC .jar to the same directory as my program and ran it as follows: java -classpath ./mysql-connector-java-5.1.12-bin.jar LoadDriver.java I still get the same error. I'm running under Mac OSX, if it matters.

    Read the article

  • Writing to a file in Python inserts null bytes

    - by Javier Badia
    I'm writing a todo list program. It keeps a file with a thing to do per line, and lets the user add or delete items. The problem is that for some reason, I end up with a lot of zero bytes at the start of the file, even though the item is correctly deleted. I'll show you a couple of screenshots to make sure I'm making myself clear. This is the file in Notepad++ before running the program: This is the file after deleting item 3 (counting from 1): This is the relevant code. The actual program is bigger, but running just this part triggers the error. import os TODO_FILE = r"E:\javi\code\Python\todo-list\src\todo.txt" def del_elems(f, delete): """Takes an open file and either a number or a list of numbers, and deletes the lines corresponding to those numbers (counting from 1).""" if isinstance(delete, int): delete = [delete] lines = f.readlines() f.truncate(0) counter = 1 for line in lines: if counter not in delete: f.write(line) counter += 1 f = open(TODO_FILE, "r+") del_elems(f, 3) f.close() Could you please point out where's the mistake?

    Read the article

  • Problem using UnhandledException in Windows Mobile app

    - by MusiGenesis
    I have a Windows Mobile program that accesses an attached device through a third-party DLL. Each call to the device can take an unknown length of time, so each call includes a timeout property. If the call takes longer than the specified timeout to return, the DLL instead throws an exception which my app catches with no problem. The problem that I have is with closing the application. If my application has made a call to the DLL and is waiting for the timeout to occur, and I then close the application before the timeout occurs, my application locks up and requires the PDA to be rebooted. I can ensure that the application waits for the timeout before closing, under normal conditions. However, I am trying to use AppDomain.CurrentDomain.UnhandledException to catch any unhandled exceptions in the program and use the event to wait for this pending timeout to occur so the program can be closed finally. My problem is that this event doesn't seem to stick around long enough. If I put a MessageBox.Show("unhandled exception"); line in the event, and then throw a new unhandled exception from my application's main form, I see the message box for a split second but then it disappears without my having clicked the OK button. The documentation I've found on this event suggests that by the time it's called the application is fully committed to closing and the closing can't be stopped, but I didn't think it meant that the event method itself won't finish. What gives (I guess that's the question)? Update: In full windows (Vista) this works as expected, but only if I use the Application.ThreadException event, which doesn't exist in .Net CF 2.0.

    Read the article

  • Can you force a crash if a write occurs to a given memory location with finer than page granularity?

    - by Joseph Garvin
    I'm writing a program that for performance reasons uses shared memory (alternatives have been evaluated, and they are not fast enough for my task, so suggestions to not use it will be downvoted). In the shared memory region I am writing many structs of a fixed size. There is one program responsible for writing the structs into shared memory, and many clients that read from it. However, there is one member of each struct that clients need to write to (a reference count, which they will update atomically). All of the other members should be read only to the clients. Because clients need to change that one member, they can't map the shared memory region as read only. But they shouldn't be tinkering with the other members either, and since these programs are written in C++, memory corruption is possible. Ideally, it should be as difficult as possible for one client to crash another. I'm only worried about buggy clients, not malicious ones, so imperfect solutions are allowed. I can try to stop clients from overwriting by declaring the members in the header they use as const, but that won't prevent memory corruption (buffer overflows, bad casts, etc.) from overwriting. I can insert canaries, but then I have to constantly pay the cost of checking them. Instead of storing the reference count member directly, I could store a pointer to the actual data in a separate mapped write only page, while keeping the structs in read only mapped pages. This will work, the OS will force my application to crash if I try to write to the pointed to data, but indirect storage can be undesirable when trying to write lock free algorithms, because needing to follow another level of indirection can change whether something can be done atomically. Is there any way to mark smaller areas of memory such that writing them will cause your app to blow up? Some platforms have hardware watchpoints, and maybe I could activate one of those with inline assembly, but I'd be limited to only 4 at a time on 32-bit x86 and each one could only cover part of the struct because they're limited to 4 bytes. It'd also make my program painful to debug ;)

    Read the article

  • What is the relationship between Turing Machine & Modern Computer ?

    - by smwikipedia
    I heard a lot that modern computers are based on Turing machine. I just cannot build a bridge from a conceptual Turing Machine to a real modern computer. Could someone help me build this bridge? Below is my current understanding. I think the computer is a big general-purpose Turing machine. Each program we write is a small specific-purpose Turing machine. The classical Turing machine do its job based on the input and its current state inside and so do our programs. Let's take a running program (a process) as an example. We know that in the process's address space, there's areas for stack, heap, and code. A classical Turing machine doesn't have the ability to remember many things, so we borrow the concept of stack from the push-down automaton. The heap and stack areas contains the state of our specific-purpose Turing machine (our program). The code area represents the logic of this small Turing machine. And various I/O devices supply input to this Turing machine.

    Read the article

  • How to handle a C# console application terminating?

    - by Nick R
    If I have a console application, is there any way I can handle the following: Ctrl-C (I know the answer to this. Using Console.TreatControlCAsInput and Console.CancelKeyPress) Session termination, such as when someone logs off Process exit, such as when someone uses the task manager to close the application. I know that if I was writing a unix application, I would handle various signals to catch the request to close (SIGTERM from memory), but I also know I need to handle these messages pretty quickly and exit before the system does a kill -9 (SIGKILL). But for a C# console application, I'm not sure how to do this.

    Read the article

  • Unit Testing in the real world

    - by Malfist
    I manage a rather large application (50k+ lines of code) by myself, and it manages some rather critical business actions. To describe the program simple, I would say it's a fancy UI with the ability to display and change data from the database, and it's managing around 1,000 rental units, and about 3k tenants and all the finances. When I make changes, because it's so large of a code base, I sometimes break something somewhere else. I typically test it by going though the stuff I changed at the functional level (i.e. I run the program and work through the UI), but I can't test for every situation. That is why I want to get started with unit testing. However, this isn't a true, three tier program with a database tier, a business tier, and a UI tier. A lot of the business logic is performed in the UI classes, and many things are done on events. To complicate things, everything is database driven, and I've not seen (so far) good suggestions on how to unit test database interactions. How would be a good way to get started with unit testing for this application. Keep in mind. I've never done unit testing or TDD before. Should I rewrite it to remove the business logic from the UI classes (a lot of work)? Or is there a better way?

    Read the article

  • Call by Reference Function in C

    - by Chad
    Hello everyone, I would just like a push in the right direction here with my homework assignment. Here is the question: (1) Write a C function called input which returns void, this function prompts the user for input of two integers followed by a double precision value. This function reads these values from the keyboard and finds the product of the two integers entered. The function uses call by reference to communicate the values of the three values read and the product calculated back to the main program. The main program then prints the three values read and the product calculated. Provide test results for the input: 3 5 23.5. Do not use arrays or global variables in your program. And here is my code: #include <stdio.h> #include <stdlib.h> void input(int *day, int *month, double *k, double *pro); int main(void){ int i,j; double k, pro; input(&i, &j, &k, &pro); printf("%f\n", pro); return 0; } void input(int *i, int *j, double *k, double *pro){ int x,y; double z; double product; scanf("%d", &x); scanf("%d", &y); scanf("%f", &z); *pro += (x * y * z); } I can't figure out how to reference the variables with pointers really, it is just not working out for me. Any help would be great!

    Read the article

  • Boost Spirit and Lex parser problem

    - by bpw1621
    I've been struggling to try and (incrementally) modify example code from the documentation but with not much different I am not getting the behavior I expect. Specifically, the "if" statement fails when (my intent is that) it should be passing (there was an "else" but that part of the parser was removed during debugging). The assignment statement works fine. I had a "while" statement as well which had the same problem as the "if" statement so I am sure if I can get help to figure out why one is not working it should be easy to get the other going. It must be kind of subtle because this is almost verbatim what is in one of the examples. #include <iostream> #include <fstream> #include <string> #define BOOST_SPIRIT_DEBUG #include <boost/config/warning_disable.hpp> #include <boost/spirit/include/qi.hpp> #include <boost/spirit/include/lex_lexertl.hpp> #include <boost/spirit/include/phoenix_operator.hpp> #include <boost/spirit/include/phoenix_statement.hpp> #include <boost/spirit/include/phoenix_container.hpp> namespace qi = boost::spirit::qi; namespace lex = boost::spirit::lex; inline std::string read_from_file( const char* infile ) { std::ifstream instream( infile ); if( !instream.is_open() ) { std::cerr << "Could not open file: \"" << infile << "\"" << std::endl; exit( -1 ); } instream.unsetf( std::ios::skipws ); return( std::string( std::istreambuf_iterator< char >( instream.rdbuf() ), std::istreambuf_iterator< char >() ) ); } template< typename Lexer > struct LangLexer : lex::lexer< Lexer > { LangLexer() { identifier = "[a-zA-Z][a-zA-Z0-9_]*"; number = "[-+]?(\\d*\\.)?\\d+([eE][-+]?\\d+)?"; if_ = "if"; else_ = "else"; this->self = lex::token_def<> ( '(' ) | ')' | '{' | '}' | '=' | ';'; this->self += identifier | number | if_ | else_; this->self( "WS" ) = lex::token_def<>( "[ \\t\\n]+" ); } lex::token_def<> if_, else_; lex::token_def< std::string > identifier; lex::token_def< double > number; }; template< typename Iterator, typename Lexer > struct LangGrammar : qi::grammar< Iterator, qi::in_state_skipper< Lexer > > { template< typename TokenDef > LangGrammar( const TokenDef& tok ) : LangGrammar::base_type( program ) { using boost::phoenix::val; using boost::phoenix::ref; using boost::phoenix::size; program = +block; block = '{' >> *statement >> '}'; statement = assignment | if_stmt; assignment = ( tok.identifier >> '=' >> expression >> ';' ); if_stmt = ( tok.if_ >> '(' >> expression >> ')' >> block ); expression = ( tok.identifier[ qi::_val = qi::_1 ] | tok.number[ qi::_val = qi::_1 ] ); BOOST_SPIRIT_DEBUG_NODE( program ); BOOST_SPIRIT_DEBUG_NODE( block ); BOOST_SPIRIT_DEBUG_NODE( statement ); BOOST_SPIRIT_DEBUG_NODE( assignment ); BOOST_SPIRIT_DEBUG_NODE( if_stmt ); BOOST_SPIRIT_DEBUG_NODE( expression ); } qi::rule< Iterator, qi::in_state_skipper< Lexer > > program, block, statement; qi::rule< Iterator, qi::in_state_skipper< Lexer > > assignment, if_stmt; typedef boost::variant< double, std::string > expression_type; qi::rule< Iterator, expression_type(), qi::in_state_skipper< Lexer > > expression; }; int main( int argc, char** argv ) { typedef std::string::iterator base_iterator_type; typedef lex::lexertl::token< base_iterator_type, boost::mpl::vector< double, std::string > > token_type; typedef lex::lexertl::lexer< token_type > lexer_type; typedef LangLexer< lexer_type > LangLexer; typedef LangLexer::iterator_type iterator_type; typedef LangGrammar< iterator_type, LangLexer::lexer_def > LangGrammar; LangLexer lexer; LangGrammar grammar( lexer ); std::string str( read_from_file( 1 == argc ? "boostLexTest.dat" : argv[1] ) ); base_iterator_type strBegin = str.begin(); iterator_type tokenItor = lexer.begin( strBegin, str.end() ); iterator_type tokenItorEnd = lexer.end(); std::cout << std::setfill( '*' ) << std::setw(20) << '*' << std::endl << str << std::endl << std::setfill( '*' ) << std::setw(20) << '*' << std::endl; bool result = qi::phrase_parse( tokenItor, tokenItorEnd, grammar, qi::in_state( "WS" )[ lexer.self ] ); if( result ) { std::cout << "Parsing successful" << std::endl; } else { std::cout << "Parsing error" << std::endl; } return( 0 ); } Here is the output of running this (the file read into the string is dumped out first in main) ******************** { a = 5; if( a ){ b = 2; } } ******************** <program> <try>{</try> <block> <try>{</try> <statement> <try></try> <assignment> <try></try> <expression> <try></try> <success>;</success> <attributes>(5)</attributes> </expression> <success></success> <attributes>()</attributes> </assignment> <success></success> <attributes>()</attributes> </statement> <statement> <try></try> <assignment> <try></try> <fail/> </assignment> <if_stmt> <try> if(</try> <fail/> </if_stmt> <fail/> </statement> <fail/> </block> <fail/> </program> Parsing error

    Read the article

  • WiX: Forcefully launch uninstall previous using CustomAction

    - by leiflundgren
    I'm writing a new major upgrade of our product. In my installer I start by finding configuration settings of the previous version, then I'd like to uninstall the previous version. I have found several guides telling me how one should make a MSI suitable for such upgrades. However, the previous was not an MSI. It was not according to best practices. It does, however, in registry HKLM\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall{GUID} specify an UninstallString. Using a RegistrySearch I can easy find the command below, which I store in UNINSTALL_CMD. RunDll32 C:\PROGRA~1\COMMON~1\INSTAL~1\PROFES~1\RunTime\10\01\Intel32\Ctor.dll,LaunchSetup "C:\Program Files\InstallShield Installation Information\{GUID}\setup.exe" -l0x9 -removeonly 4: I cannot get the hang of the CustomAction needed to perform the actual uninstall. <CustomAction Id="ca.UninstPrev" Property="UNINSTALL_CMD" ExeCommand="" /> The MSI logs says: Info 1721. There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your support personnel or package vendor. Action: ca.UninstallPrevious, location: RunDll32 C:\PROGRA~1\COMMON~1\INSTAL~1\PROFES~1\RunTime\10\01\Intel32\Ctor.dll,LaunchSetup "C:\Program Files\InstallShield Installation Information{GUID}\setup.exe" -l0x9 -removeonly, command: Anyone seeing what I am doing wrong here? Regards Leif

    Read the article

  • Multiple dynamic timers

    - by Rickard
    I am working on a project where I need to let the user create one (or more) timers to fire off an event. The user is supposed to define variables such as if the timer should be active and how often the timer will fire along with some other variables of what will happen when the timer is fiering. All these variables are stored in a dictionary (Disctionary) where the object holds all the variables the user has set and the string is the name that the user has chosen for this timer. I then want my program to loop through this dictionary and search for all objects which has the variable t_Active set to true (this I have already achieved). What I need help with figuring out is the follwoing: When it detects the variable, and if it's set to true, I need the program to see if there is already a timer created for this. If it isn't, it should create one and set the relevant parameters for the timer. The two variables t_num and t_period should decide the interval of the timer. t_num is an int and t_period is a string which will be set to either minutes, hours or days. Combining t_num with 60000 (minutes), 3600000 (hours) or 86400000 should give the corrct interval. But how would I go on about programatically create a timer for each user-defined active object? And how do I get the program to detect wether or not a timer has already been created? I have been searching both here and on google, but so far I haven't come across something that makes sense to me. I am still learning C#, so what make sense to you guys may not neccessarilly make sense to me yet. :) I hope I have explaned what I need good enough, please do ask me to clarify if you don't get me. Edit: Maybe I should also mention that the mentioned dictionary will also be saved to an XML file to that the user can pick up all the settings they made at any time.

    Read the article

  • Yet another Python Windows CMD mklink problem ... can't get it to work!

    - by Felix Dombek
    OK I have just posted another question which outlined my program but the specific problem was different. Now, my program just stops working without any message whatsoever. I'd be grateful if someone could help me here. I want to create symlinks for each file in a directory structure, all in one large flat folder, and have the following code by now: # loop over directory structure: # for all items in current directory, # if item is directory, recurse into it; # else it's a file, then create a symlink for it def makelinks(folder, targetfolder, cmdprocess = None): if not cmdprocess: cmdprocess = subprocess.Popen("cmd", stdin = subprocess.PIPE, stdout = subprocess.PIPE, stderr = subprocess.PIPE) print(folder) for name in os.listdir(folder): fullname = os.path.join(folder, name) if os.path.isdir(fullname): makelinks(fullname, targetfolder, cmdprocess) else: makelink(fullname, targetfolder, cmdprocess) #for a given file, create one symlink in the target folder def makelink(fullname, targetfolder, cmdprocess): linkname = os.path.join(targetfolder, re.sub(r"[\/\\\:\*\?\"\<\>\|]", "-", fullname)) if not os.path.exists(linkname): try: os.remove(linkname) print("Invalid symlink removed:", linkname) except: pass if not os.path.exists(linkname): cmdprocess.stdin.write("mklink " + linkname + " " + fullname + "\r\n") So this is a top-down recursion where first the folder name is printed, then the subdirectories are processed. If I run this now over some folder, the whole thing just stops after 10 or so symbolic links. Here is the output: D:\Musik\neu D:\Musik\neu\# Electronic D:\Musik\neu\# Electronic\# tag & reencode D:\Musik\neu\# Electronic\# tag & reencode\ChillOutMix D:\Musik\neu\# Electronic\# tag & reencode\Unknown D&B D:\Musik\neu\# Electronic\# tag & reencode\Unknown D&B 2 The program still seems to run but no new output is generated. It created 9 symlinks for some files in the # tag & reencode and the first three files in the ChillOutMix folder. The cmd.exe Window is still open and empty, and shows in its title bar that it is currently processing the mklink command for the third file in ChillOutMix. I tried to insert a time.sleep(2) after each cmdprocess.stdin.write in case Python is just too fast for the cmd process, but it doesn't help. Does anyone know what the problem might be?

    Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >