Search Results

Search found 7118 results on 285 pages for 'sam ram san'.

Page 204/285 | < Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >

  • Is it safe to run an operating system from an USB flash drive?

    - by Georg
    I've got a laptop that has a broken harddisk controller. Replacing the motherboard is quite expensive. I thought about buying a flash drive and installing & running the system from it. However, I'm concerned about some things. Speed: Are they fast enough for swap memory (I've got only 1GB RAM installed.) I'm considering buying 2 or 3 of them and making them into a RAID. What about limited write cycles? How long will it last for a system that has a filesystem with journaling enabled? I'd hate to abandon it. Are there significant differences between internal SSD which are used in modern laptops like MacBooks and USB flash drives? What should I expect in 10 years when the memory wear starts kicking in?

    Read the article

  • Older raid controllers in raid 5 vs. Jbod and SW raid

    - by TEB
    Hi. Im in the fortunate position to have 6 Supermicro older VOD servers with the following config: Supermicro 3U case, 3xPSU Dual Xeon 3ghz P4 class cpu (5 years old.. havnt checked the exact type) 4GB Ram 3ware 9500-8 SATA controller 8 SATA SLOTS and alot of free drives. 2GB FLASH Bootdrive What im curious about is the RAID5 performance on these old beasts in HW mode vs. SW on Linux with the controller set in JBOD mode. Im thinking on using Centos 5.5 or Ubuntu or ZFS RaidZ on Opensolaris. Any tips? or reccomendations ? best regards TEB

    Read the article

  • SQL 2008 Memory Usage

    - by Danilo Brambilla
    I have a SQL Server 2008 (ver 10.0.1600) running on a Windows Server 2008 R2 Enterprise server with 8 GB of physical ram. If I open Task Manager I can see on 'Physical Memory' section of 'Performance' tab that only 340 MB are Available of 8191 Total, but I can't see any process using such amount of memory. Please note SQL Server is memory limited to 6GB (Maximum Server Memory = 6000). If I open Sysinternals Process Explorer, I can see sqlsrvr.exe process has: Private Bytes: 227.000 K Working Set: 140.000 K Virtual Size: 8.762.000 K What does this means? Is there any way to free up this memory for other process? Why Virtual Size figure as allocated memory? I thought that Virtual Size was 'reserved memory' only.

    Read the article

  • Mounting root failed. Dropping into basic maintenance shell

    - by vmsystem
    Hi, I have purchased AMD Phenom X4 955 3.2GHZ processor with supporting gigabyte GA-MA785GM-US2H mother board / 6GB DDR2 RAM / 500GB SATA drive for learning Vmware ESX 3.5 product. In the above configuration, I have installed windows xp 64 bit operating systems and continue to installed vmware workstation 6.5. From the VM workstation, I can able to install ESX3.5 update2, but I unable to start properly, please refer the below mention error. “Mounting root failed. Dropping into basic maintenance shell. To collect logs for VMware, connect a USB storage device and run 'bin/vm-support '. Machine will be rebooted when you exit from this shell.” The same was tested in the windows 2003 Enterprise Edition server / windows 7 32bit / windows 7 64bit also, Please help me to resolve the issue.

    Read the article

  • ASUS K55VM Laptop unexpectedly shuts down

    - by Abhishek Sha
    I've read quite a few questions on SuperUser of people having laptop shutdown problems but mine is different. My laptop specs: Intel Core i7 3610QM (IvyBridge) NVIDIA GT630M 2GB and Intel GMA4000 8GB RAM Windows 7 64 Bit My laptop occasionally shuts down when playing FarCry 3. It's around 5 months old. I've played games like Crysis and it never shuts down unexpectedly. Since I experienced this shut down recently, I decided for GPU-Z to log the temperatures. The final log value at the time of shutdown were thus: GPU Core Clock [MHz] - 797.3 GPU Memory Clock [MHz] - 896.8 GPU Temperature [°C] - 89.0 GPU Load [%] - 99 Memory Controller Load [%] - 36 Video Engine Load [%] - 0 Memory Usage (Dedicated) [MB] - 535 Memory Usage (Dynamic) [MB] - 53 VDDC [V] - 1.0620 My drivers are up-to-date and I didn't encounter any BSODs at the time of shut down. It simply turns off.

    Read the article

  • Issues connecting to WPA2 with User Authentication Mavericks?

    - by heinst
    I was on all the builds of the Mavericks beta and connecting to my University's network was fine. Then I upgraded to the public release and now I can't seem to connect to the internet. I can connect to other networks, but not my schools. Its a WPA2 network with a User Authentication. And my MacBook is a 2011? 2.2 GHz first gen i7 Quad Core with 8 GBs of RAM. Does anyone else have the same issue? Any tips on how to fix it? Thanks! heinst

    Read the article

  • p7h55-m/usb3 blue screen ?

    - by winterwindz
    hi im not sure if this is the right place to ask but, i just build a new desktop for gaming. i3 530 2.93 GHz P7H55-M/USB3 Corsair Vengeance 4GB 1600MHz iGame Gtx 460 Win 7 32bit Huntkey X7 900W Everytime i start the computer it would run normally until the windows loading and will just stuck and hit the blue screen.i tried everypossible way to repair,restore the windows but nutin seems to be working. I'm not sure if its compatibility problem or Bios or even Ram,since the beep is a normal beep and will only blue screen when loading the windows. if anyone can help me id appriciate it. thx

    Read the article

  • monitor just what's going on -on a firewall

    - by bbutle01
    I have this little snapgear firewall. It's a little purpose built box running a custom linux, SH4 processor @240 Mhz, 64MB of ram. Basically how close we are to capacity is a mystery to me. I know I can run top and see the status of all the processes, but how can I see just how much of the processor is going to passing data... and how to estimate when I'm going to need to upgrade, and by tweaking iptables rules, how does that help/hurt the processor. suggestions?

    Read the article

  • sql perfomance on new server

    - by Rapunzo
    My database is running on a pc (AMD Phenom x6, intel ssd disk, 8GB DDR3 RAM and windows 7 OS + sql server 2008 R2 sp3 ) and it started working hard, timeout problems and up to 30 seconds long queries after 200 mb of database And I also have an old server pc (IBM x-series 266: 72*3 15k rpm scsi discs with raid5, 4 gb ram and windows server 2003 + sql server 2008 R2 sp3 ) and same query start to give results in 100 seconds.. I tried query analyser tool for tuning my indexed. but not so much improvements. its a big dissapointment for me. because I thought even its an old server pc it should be more powerfull with 15k rpm discs with raid5. what should I do. do I need $10.000 new server to get a good performance for my sql server? cant I use that IBM server? Extra information: there is 50 sql users and its an ERP program. There is my query ALTER FUNCTION [dbo].[fnDispoTerbiye] ( ) RETURNS TABLE AS RETURN ( SELECT MD.dispoNo, SV.sevkNo, M1.musteriAdi AS musteri, SD.tipTurId, TT.tipTur, SD.tipNo, SD.desenNo, SD.varyantNo, SUM(T.topMetre) AS toplamSevkMetre, MD.dispoMetresi, DT.gelisMetresi, ISNULL(DT.fire, 0) AS fire, SV.sevkTarihi, DT.gelisTarihi, SP.mamulTermin, SD.miktar AS siparisMiktari, M.musteriAdi AS boyahane, MD.akisNotu AS islemler, --dbo.fnAkisIslemleri(MD.dispoNo) DT.partiNo, DT.iplikBoyaId, B.tanimAd AS BoyaTuru, MAX(HD.hamEn) AS hamEn, MAX(HD.hamGramaj) AS hamGramaj, TS.mamulEn, TS.mamulGramaj, DT.atkiCekmesi, DT.cozguCekmesi, DT.fiyat, DV.dovizCins, DT.dovizId, (SELECT CASE WHEN DT.dovizId = 2 THEN CAST(round(SUM(T .topMetre) * DT.fiyat * (SELECT TOP 1 satis FROM tblKur WHERE dovizId = 2 ORDER BY tarih DESC), 2) AS numeric(18, 2)) WHEN DT.dovizId = 3 THEN CAST(round(SUM(T .topMetre) * DT.fiyat * (SELECT TOP 1 satis FROM tblKur WHERE dovizId = 3 ORDER BY tarih DESC), 2) AS numeric(18, 2)) WHEN DT.dovizId = 1 THEN CAST(round(SUM(T .topMetre) * DT.fiyat * (SELECT TOP 1 satis FROM tblKur WHERE dovizId = 1 ORDER BY tarih DESC), 2) AS numeric(18, 2)) END AS Expr1) AS ToplamTLfiyat, DT.aciklama, MD.dispoNotu, SD.siparisId, SD.siparisDetayId, DT.sqlUserName, DT.kayitTarihi, O.orguAd, 'Çözgü=(' + (SELECT dbo.fnTipIplikler(SD.tipTurId, SD.tipNo, SD.desenNo, SD.varyantNo, 1) AS Expr1) + ')' + ' Atki=(' + (SELECT dbo.fnTipIplikler(SD.tipTurId, SD.tipNo, SD.desenNo, SD.varyantNo, 2) AS Expr1) + ')' AS iplikAciklama, DT.prosesOk, dbo.[fnYikamaTalimat](SP.siparisId) yikamaTalimati FROM tblDoviz AS DV WITH(NOLOCK) INNER JOIN tblDispoTerbiye AS DT WITH(NOLOCK) INNER JOIN tblTanimlar AS B WITH(NOLOCK) ON DT.iplikBoyaId = B.tanimId AND B.tanimTurId = 2 ON DV.id = DT.dovizId RIGHT OUTER JOIN tblMusteri AS M1 WITH(NOLOCK) INNER JOIN tblSiparisDetay AS SD WITH(NOLOCK) INNER JOIN tblDispo AS MD WITH(NOLOCK) ON SD.siparisDetayId = MD.siparisDetayId INNER JOIN tblTipTur AS TT WITH(NOLOCK) ON SD.tipTurId = TT.tipTurId INNER JOIN tblSiparis AS SP WITH(NOLOCK) ON SD.siparisId = SP.siparisId ON M1.musteriNo = SP.musteriNo INNER JOIN tblTip AS TP WITH(NOLOCK) ON SD.tipTurId = TP.tipTurId AND SD.tipNo = TP.tipNo AND SD.desenNo = TP.desen AND SD.varyantNo = TP.varyant INNER JOIN tblOrgu AS O WITH(NOLOCK) ON TP.orguId = O.orguId INNER JOIN tblMusteri AS M WITH(NOLOCK) INNER JOIN tblSevkiyat AS SV WITH(NOLOCK) ON M.musteriNo = SV.musteriNo INNER JOIN tblSevkDetay AS SVD WITH(NOLOCK) ON SV.sevkNo = SVD.sevkNo ON MD.mamulDispoHamSevkno = SV.sevkNo LEFT OUTER JOIN tblTop AS T WITH(NOLOCK) INNER JOIN tblDispo AS HD WITH(NOLOCK) ON T.dispoNo = HD.dispoNo AND T.dispoTuruId = HD.dispoTuruId ON SVD.dispoTuruId = T.dispoTuruId AND SVD.dispoNo = T.dispoNo AND SVD.topNo = T.topNo AND MD.siparisDetayId = HD.siparisDetayId ON DT.dispoTuruId = MD.dispoTuruId AND DT.dispoNo = MD.dispoNo LEFT OUTER JOIN tblDispoTerbiyeTest AS TS WITH(NOLOCK) ON DT.dispoTuruId = TS.dispoTuruId AND DT.dispoNo = TS.dispoNo --WHERE DT.gelisTarihi IS NULL -- OR DT.gelisTarihi > GETDATE()-30 GROUP BY MD.dispoNo, DT.partiNo, DT.iplikBoyaId, TS.mamulEn, TS.mamulGramaj, DT.gelisMetresi, DT.gelisTarihi, DT.atkiCekmesi, DT.cozguCekmesi, DT.fire, DT.fiyat, DT.aciklama, DT.sqlUserName, DT.kayitTarihi, SD.tipTurId, TT.tipTur, SD.tipNo, SD.desenNo, SD.varyantNo, SD.siparisId, SD.siparisDetayId, B.tanimAd, M.musteriAdi, M.musteriAdi, M1.musteriAdi, O.orguAd, TP.iplikAciklama, SD.miktar, MD.dispoNotu, SP.mamulTermin, DT.dovizId, DV.dovizCins, MD.dispoMetresi, MD.akisNotu, SV.sevkNo, SV.sevkTarihi, DT.prosesOk,SP.siparisId )

    Read the article

  • Should server spare parts be stored in climate controlled storage?

    - by Shane Wealti
    What is a best practice for storing server spares (hard drives, RAM, power supplies, etc) with respect to how/where they are stored? Some options are storing them in climate controlled storage or just a standard warehouse-type stockroom? My understanding is that all other things being equal climate-controlled storage is preferred. What are the risks of storing that type of thing in a non-climate-controlled, somewhat dusty shelving area? Conversely are there risks to storing spares in a climate controlled area? If there are space limitations in climate controlled storage are there some parts, such as hard drives, which should be in climate controlled, while other parts such as power supplies will probably be ok in non climate controlled storage?

    Read the article

  • setup lowcost image storage server with 24x SSD array to get high IOPS?

    - by Nenad
    I want to build let's name it a lowcost Ra*san which would host for our social site the images (many millions) we have 5 sizes of every photo with 3 KB, 7 KB, 15 KB, 25 KB and 80 KB per Image. My idea is to build a Server with 24x consumer 240 GB SSD's in Raid 6 which will give me some 5 TB Disk space for the photo storage. To have HA I can add a 2nd one and use drdb. I'm looking to get above 150'000 IOPS (4K Random reads). As we mostly have read access only and rarely delete photos i think to go with consumer MLC SSD. I read many endurance reviews and don't see there a problem as long we don't rewrite the cells. What you think about my idea? - I'm not sure between Raid 6 or Raid 10 (more IOPS, cost SSD). - Is ext4 OK for the filesystem - Would you use 1 or 2 Raid controller, with Extender Backplane If anyone has realized something similar i would be happy to get Real World numbers. UPDATE I have buy 12 (plus some spare) OCZ Talos 480GB SAS SSD Drive's they will be placed in a 12-bay DAS and attached to a PERC H800 (1GB NV Cache, manufactured by LSI with fastpath) Controller, I plan to setup Raid 50 with ext4. If someone is wondering about some benchmarks let me know what you would like to see.

    Read the article

  • Performance problems on RDC to our Terminal-Server Win2008 R2

    - by user40021
    Hello, we have a new win2008-R2 (2x Xeon X5570, 32GB RAM). There I have installed the terminal-server roles, thats all OK. Currently 5 users are working at this server, but all get a very low performance in their remote-desktop session. Sometime it takes 1-2 seconds till the keyboard-inputs will be performed and shown. At the clients I run RDP v 6.1 We have also an older TS-server (based on Win2003 with an Opteron-CPU), there are working about 20 users at the same time. There I do not have the troubles with the inputs at the remote-desktop sessions. Both servers are connected to the same gigabit-switch. Any ideas what could cause the troubles at the Win2008 R2? Many thanks in advance. Regards Chris

    Read the article

  • Copy past speed very slow for a large number of tiny files on Windows but not on linux

    - by Arno2501
    I've got this folder which contains 15'000 of tiny images (around 400 bytes each). If I copy past this folder on my laptop (Windows 7, i7 latest gen, superfast ssd) it takes about 30 seconds (yes for 7 megs !!!) the average transfer rate is 400 KBytes / second which is so slow. I mean my usual transfer rate is more like hundreds of MBytes per second !!! I get the same problem on my servers (Windows 2003, 2008 /r2) and on every Windows box that I could get my hands on. On the other hand if I do the same on a linux box (debian base, Ext3 FS) (which runs on the same SAN than all the windows servers I've tested) It's nearly instantaneous !!! I'm pretty sure the size / number of the files may stress such filesystem more than another but such differences !? Why is that ? Why is it so slow on the windows boxes (more that 30 sec for 7 MB) and so fast on the linux ones (one sec or so) (I mean this was not a hardlink that I've created it was a true copy). Is it a normal behaviour or something unusual ?

    Read the article

  • System freezes for 5 seconds when seeking in or skipping to songs and videos

    - by pragmatick
    When I start playing a new video or MP3 or skip to a time when playing them, my system hangs for a couple of seconds. A restart solves this problem, but only for a while. It does not matter which player I use (VLC, Media Player, Winamp, Zoom Player), which media files or if they are located on a network drive or on the local hard drive. Everything else works flawlessly and after the playing has started, there are not problems - until I switch to another file. Additionally, when the Winamp playlist continues to the next song, the system does not hang. When I skip to the next song manually, the system hangs. I've been using Windows XP for years and consider myself a fairly professional windows user, but I have no idea what could cause this. Dual-core 2Ghz, 2GB RAM, Windows XP SP3, Audigy card with kxproject. Worked flawlessly for years. Would be glad if anyone could help.

    Read the article

  • What causes Windows Boot to stall?

    - by Nick Berardi
    For about 6 months now I have been having this weird problem where Windows 7 fails to fully boot correctly. What happens is this. Starting Windows shows up on the screen. Then 3 out of 4 times nothing else happens, no Windows Flag animation, just nothing occurs. After 3 or 4 restarts repeating steps 1-2 above, the Windows Flag animation finally shows up and everything works as expected. My question is what is causing this problem in steps 1 and 2? Because I have tried the following with no luck: Error checking and correcting of any disk errors Updating drivers Doing a clean install of Windows 7 My setup is as follows: Windows 7 64-bit Ultimate 8 GB RAM 128 GB Crucial SSD (firmware 0005) Dell Latitude E6410 Intel Wireless and Graphics Other than what I have tried above I am totally out of ideas and looking for some new ones to try.

    Read the article

  • Minix3 on Vmware

    Hi, I install minix3 on vmware using installation CD i make using .iso image which is available @minix3 I make 2GB Harddisk, 512MB RAM on VMware, and installed step-by-step. It got installed and working fine. But i wana install 'packman' which is X window system. I'm not able to install it. It asks for installation CD, its still there and its detected also, but i couldn't proceed. Actually i install minix to learn Operating system design and Implementation :) Have any1 tried installing 'packman' i.e X window system on minix3. Please guide me. :)

    Read the article

  • Linux Live CD for old computer

    - by Joel Coehoorn
    I have a pentium II (that's right, pentium II) with a scant 200MB of ram. This was a high-end workstation in it's day. The machine currently runs dos on a raid array, and I need to pull some data from it. I figure my best chance at this is to use a linux live cd to copy the data to one of our active directory network shares (there is a network card in the machine). Unfortunately, my linux skills are abysmal, so I'm not sure where to get started: Where should I look to find a linux cd that will run well on such an old system Since I'm likely gonna need to be command-line only, what do I need to do to configure the network card and mount the network share via the command line? Bonus points: exact syntax needed to copy and convert the entire volume for use in VMware server 2.0, but really just copying all the data should be enough.

    Read the article

  • My computer has gone horribly slow, how can I dignose whats wrong?

    - by Chirag N.R.
    I have a computer based on AMD processor & 512 MB RAM. Lately the computer has gone horribly slow. I did many tricks but was of no avail. So, I reinstalled my Operating system - Win XP SP3, still the the response is very slow. I checked if there are any background applications consuming resources. There was nothing suspicious. I removed all the applications on start, still the computer is slow. I've heard that AMD processor based systems show this behavior when they get aged. Is it true? Should I just buy a new system?

    Read the article

  • Dell Inspirion 1525 64bit driver compatibility

    - by Tony
    Hello, Can anyone tell me what the compatibility of drivers on 64bit vista are like on the Dell Inspiron 1525. Mine is just a year old now and I want to upgrade to 64bit vista. I wondered if there's known issues with drivers that I should be aware of before upgrading? Tony PS: is the upgrade worth it? My machine has 3GB of RAM and runs a T5800 2.0GHz DuoCore Processor. I use Visual Studio often and have loads of things open at the same time a lot. That's why I'm considering an upgrade.

    Read the article

  • Why is hibernation still used?

    - by Moses
    I've never quite understood the original purpose of the Hibernation power state in Windows. I understand how it works, what processes take place, and what happens when you boot back up from Hibernate, but I've never truly understood why it's used. With today's technology, most notably with SSDs, RAM and CPUs becoming faster and faster, a cold boot on a clean/efficient Windows installation can be pretty fast (for some people, mere seconds from pushing the power button). Standby is even faster, sometimes instantaneous. Even SATA drives from 5-6 years ago can accomplish these fast boot times. Hibernation seems pointless to me when modern technology is considered, but perhaps there are applications that I'm not considering. What was the original purpose behind hibernation, and why do people still use it? Edit: I rescind my comment about hibernation being obsolete, as it obviously has very practical applications to laptops and mobile PCs, considering the power restrictions. I was mostly referring to hibernation being used on a desktop.

    Read the article

  • BSOD constantly with same ntoskrnl.exe error and disk indicator is frozen

    - by Sheep
    BSOD constantly and the disk indicator is frozen. Error do not happen immediately, usually an hour after boot up. Here is the Minidump: Bug Check Code = 0x00000124 Caused By Driver = ntoskrnl.exe Caused By Address = ntoskrnl.exe+4b094c Crash Address = ntoskrnl.exe+4b094c Seems to be hardware problem, but I checked RAM, no error. I have two HDs installed, system is on SSD, data is on HDD. Checked SSD with the properties-tools-error-checking , no error. Re-installed several times, still happens even after removed HDD. Configuration: SSD: Crucial M4-CT064M4SSD2 with Firmware 0009 Intel HM65 CPU: i7-2630QM The SSD is set correctly, SATA III 6Gb/s enabled, and everything worked perfectly for nearly a year.

    Read the article

  • "This CPU is not compatible with 64-bit mode." - Installing Windows 7 Ultimate 64-bit on a netbook with a 64-bit Intel Atom CPU

    - by galacticninja
    I tried installing Windows 7 Ultimate SP 1, 64-bit on a netbook (Lenovo IdeaPad S110), which has the Intel Atom N2800 (1.86 GHz) as its processor, but I get the following error message when the Windows 7 installation DVD is loading: It says "Attempting to load a 64-bit application, however this CPU is not compatible with 64-bit mode". The Intel Atom N2800 is a 64-bit CPU according to its webpage. I am wondering why the Windows 7 installer shows this error message, despite this. Is there something I must configure first before installing Windows 7, 64-bit? Or is the netbook not compatible with a 64-bit OS? I am trying to format the netbook and install Windows 7 Ultimate 64-bit, instead. Other details: The netbook has 2 GB RAM. The netbook initially had Windows 7 Starter (32-bit) installed.

    Read the article

  • Should I partition my main table with 2 millions rows?

    - by domribaut
    Hi, I am a developer and would need some DBA-advices. We are starting to get performance problem with a MSSQL2005 database. The visible effects of the incidents is mainly CPU-hog on the server but operations reported that it was also draining resources from the SAN (not always). the main source of issues is for sure in some application but I am wondering if we should partition some of the main tables anyway in order to relax the I/O pressure. The base is about 60GB in one file. The main table (order) has 2.1 Million rows with a 215 colones (but none is huge). We have an integer as PK so it should be OK to define a partition function. Will we win something with partitioning? will partition indexes buy us something? Here are some more facts about the DB and the table database_name database_size unallocated space My_base 57173.06 MB 79.74 MB reserved data index_size unused 29 444 808 KB 26 577 320 KB 2 845 232 KB 22 256 KB name rows reserved data index_size unused Order 2 097 626 4 403 832 KB 2 756 064 KB 1 646 080 KB 1688 KB Thanks for any advice Dom

    Read the article

  • Windows 7 has trouble installing software with Visual C++ 2005 & 2008

    - by John Fitzgerald
    I have been reinstalling Windows 7 over and over again on an ASUS P5lD2 2Gb Ram 3Ghz P4 because it ultimately loses the contents of "Turn Windows Features On or Off" after I install software like Autocad 2010 & Microsoft Office 2007. I get install errors like 1935 and 1704 on the way tried different fixes at different times (install software in different order to try and isolate problem too). Ultimately I force the software to install after much buggering and end up losing the contents of "TWFOOO" Should I be installing some older items like .net framework 1.1, 2.0 and Visual Studio items like vcredist_x86.exe? getting a bit lost because of compounded problems...

    Read the article

  • low speed web application, Server problem or Application

    - by Ashian
    Hi, I have a web application written by asp.net (c#) sql server 2005. we host it on 2 dedicated server ( IIS and SQL server ) From some month ago , in some days of week we have many reports about speed issue. we have some other application on this server using same database. when we have speed problem all aplication on these server have this problem, but applications on other server in same data center work correctly. ram and cpu usage are ok. how can I check that the problem related to internet connection or my application design? which parameters must be checked. Some other information In applications users can upload several files to server , each file up to 3 MB. we use a sql web admin application, on same server that has same problem, this is a standard application which work perfectly on other servers. Thanks

    Read the article

< Previous Page | 200 201 202 203 204 205 206 207 208 209 210 211  | Next Page >