Search Results

Search found 111890 results on 4476 pages for 'git update server info'.

Page 2045/4476 | < Previous Page | 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052  | Next Page >

  • Headless VirtualBox VM NAT Network

    - by dirt
    I have a remote linux server accessible through SSH only. My goal is to host multiple Virtual Machines on this host server using VirtualBox. The host server has 1 IP address, so NAT will be used to route to the VMs for example 10022 will forward to server1:22 and 20022 will forward to server2:22. I have installed VirtualBox and copied a pre-configured CentOS VM to the host server. I start the VM, but cannot establish a connection to the server for example ssh -p 10022 127.0.0.1 times out. I've tried many things: Method 1: Copied existing .vdi, attached to new VM Method 2: Imported .Ova VM (thought it would help any MAC re-init issues?) NAT network type, tried natnet1 192.168/16 and 10.0/16 VBoxManage modifyvm "hermes.awoms.com" --natnet1 "192.168/16" Port forwarding with and without specifying VM ip in modifyvm --natpf1 command VBoxManage modifyvm "hermes" --natpf1 "guestssh,tcp,,10022,,,22" VBoxManage modifyvm "hermes" --natpf1 "guestssh,tcp,,10022,192.168.0.15,22" I can't see if VM is even booting (VBoxHeadless "hermes" --start & runs with no errors) I can't tell if VM is getting an IP address Is there anything else I can do to get more information from VirtualBox or the VM starting up when the only access I have is SSH?

    Read the article

  • Accessing guests on virtual network when connected to host via PPTP

    - by Viktor Elofsson
    I'm setting up a development machine which runs Ubuntu 12.04 and KVM for virtualization. I have a guest running Ubuntu 12.04 which can be accessed from the host via its IP address which is assigned by libvirt. The guest can also access the internet, no problem there. However, now I want to setup PPTP so I can connect to the host (from my workstation running Windows 7) and directly access guests without relying on SSH port forwarding. I can connect from my W7-machine to the host (PPTP), but I cannot access any virtual machines (which are accessable from the host directly). Relevant configuration files cat /etc/network/interfaces auto lo iface lo inet loopback # device: eth0 auto eth0 iface eth0 inet static address x.x.x.x broadcast x.x.x.x netmask x.x.x.x gateway x.x.x.x # default route to access subnet up route add -net x.x.x.x netmask x.x.x.x gw x.x.x.x eth0 virsh net-edit default <network> <name>default</name> <uuid>xxxxxxxx-72ce-3c20-af0f-d3a010f1bef0</uuid> <forward mode='nat'/> <bridge name='virbr0' stp='on' delay='0' /> <mac address='52:54:00:xx:xx:xx'/> <ip address='192.168.122.1' netmask='255.255.255.0'> <dhcp> <range start='192.168.122.2' end='192.168.122.254' /> <host mac='52:54:00:yy:yy:yy' name='web1' ip='192.168.122.11' /> </dhcp> </ip> </network> cat /etc/pptpd.conf (commented lines removed) # TAG: option # Specifies the location of the PPP options file. # By default PPP looks in '/etc/ppp/options' # option /etc/ppp/pptpd-options # TAG: logwtmp # Use wtmp(5) to record client connections and disconnections. # logwtmp #(Recommended) localip 192.168.122.1 remoteip 192.168.122.234-238,192.168.122.245 cat /etc/ppp/chap-secrets* # Secrets for authentication using CHAP # client server secret IP addresses xxxxx * yyyyyyyyyy 192.168.122.100 I get the correct IP address when connecting my W7-machine, but when I try to ping the virtual machine at 192.168.122.11 I get Reply from 192.168.122.1: Destination port unreachable. It's probably something trivial I'm missing but I can't for the life of me figure out what it is. So I'm turning to you, serverfault.

    Read the article

  • Unable to start auditd

    - by George Reith
    I am on CentOS 5.8 final I recently installed auditd via yum install audit however I am unable to start it. I edited the configuration file to give a verbose output of the error it is recieving in starting up and this is the output: # service auditd start Starting auditd: Config file /etc/audit/auditd.conf opened for parsing log_file_parser called with: /var/log/audit/audit.log log_format_parser called with: RAW log_group_parser called with: root priority_boost_parser called with: 4 flush_parser called with: INCREMENTAL freq_parser called with: 20 num_logs_parser called with: 4 qos_parser called with: lossy dispatch_parser called with: /sbin/audispd name_format_parser called with: NONE max_log_size_parser called with: 5 max_log_size_action_parser called with: ROTATE space_left_parser called with: 75 space_action_parser called with: SYSLOG action_mail_acct_parser called with: root admin_space_left_parser called with: 50 admin_space_left_action_parser called with: SUSPEND disk_full_action_parser called with: SUSPEND disk_error_action_parser called with: SUSPEND tcp_listen_queue_parser called with: 5 tcp_max_per_addr_parser called with: 1 tcp_client_max_idle_parser called with: 0 enable_krb5_parser called with: no GSSAPI support is not enabled, ignoring value at line 30 krb5_principal_parser called with: auditd GSSAPI support is not enabled, ignoring value at line 31 Started dispatcher: /sbin/audispd pid: 3097 type=DAEMON_START msg=audit(1339336882.187:9205): auditd start, ver=1.8 format=raw kernel=2.6.32-042stab056.8 auid=4294967295 pid=3095 res=success config_manager init complete Error setting audit daemon pid (Connection refused) type=DAEMON_ABORT msg=audit(1339336882.189:9206): auditd error halt, auid=4294967295 pid=3095 res=failed Unable to set audit pid, exiting The audit daemon is exiting. Error setting audit daemon pid (Connection refused) [FAILED] The only information I can find online is that this may be due to SELinux, however SELinux is giving me problems of it's own. No matter what I do it appears to be disabled (I want to enable it). The configuration is set to enforced and the server has been rebooted many a time however sestatus still returns SELinux status: disabled. Can anyone shine some light on this problem? EDIT: I don't know if it is related but I noticed the following message appearing in my /var/log/messages Jun 10 16:25:22 s1 iscsid: iSCSI logger with pid=2056 started! Jun 10 16:25:22 s1 iscsid: Missing or Invalid version from /sys/module/scsi_transport_iscsi/version. Make sure a up to date scsi_transport_iscsi module is loaded and a up todate version of iscsid is running. Exiting... I try to start the iSCSI daemon myself (I have not a clue what it does; I am a linux newbie) and I get the following error: Starting iSCSI daemon: FATAL: Could not load /lib/modules/2.6.32-042stab056.8/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-042stab056.8/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-042stab056.8/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-042stab056.8/modules.dep: No such file or directory FATAL: Could not load /lib/modules/2.6.32-042stab056.8/modules.dep: No such file or directory [FAILED] If I go to /lib/modules/ I notice the directory exists but is completely empty.

    Read the article

  • "Windows cannot find" file when opening Excel spreadsheet

    - by DanH
    For all of my Excel spreadsheets when I attempt to open them (by double-clicking in explorer) I get the message "Windows cannot find C:...". The files are there, and are valid zip files as seen by 7-Zip. There are no apparent lock files in the directories. I did just install Norton-360 over the weekend (replacing Kasperski), but the Norton log shows no events related to Excel. However, while installing Norton I did reboot with some Excel files open. Presumably something is hosed in my Excel configuration but I don't know what. Update (Before actually posting) -- I found an article that suggested turning off Advanced Option "Ignore other applications that use DDE", then doing excel.exe /unregister followed by excel.exe /register. I tried this but I suspect that the two Excel calls were ignored (Excel opened, but no obvious change). With that option off the spreadsheets load OK, but not with it on. And, curiously, spreadsheets load OK with the option on or off if I open Excel first and then open the spreadsheet in it. Does anyone have any idea what effect leaving that option off will have? Update 2 -- I tried running the "repair" option. It said it corrected a couple of config things (without saying what they were), but I still get a failure if I double-click an Excel file with the "Ignore other applications..." option checked. Update 3 -- I managed to fix this problem, but failed at the time to come back and say what I did, and now I can't remember for sure. But I think it had something to do with "Options"/"Save" and some of the values there. Something to do with AutoRecover, perhaps. (Possibly there was a file in recovery and I had to specify "Disable AutoRecover for this workbook" to let bring-up get past it. Or perhaps the AutoRecover file location was hosed.) Anyway, if it happens to someone else, and you find the fix, post it below and I'll mark it answered.

    Read the article

  • Upgrading Ubuntu 9.10 to 10.04 Problem: No Internet Connection?

    - by damx
    Earlier today I tried upgrading my Ubuntu 9.10 Karmic Kaola from the update manager. (FYI: all 9.10 updates were applied prior to this) Everything was going well downloading until I got an error dialog informing me that some software packages weren't downloaded because of an Internet connection. Would say it was halfway thru. Anyway, Was told that the software packages that it did download, however, would kept and I figure it's not a big deal. Just run it again. But first ran Firefox to verify my connection as I haven't had any connection problems. But my internet connection was/is fine as evident by this posting. With that cleared, I ran the update manager again, clicked on "Upgrade" and this time I received "Could not download the release notes. Please check your internet connection" This is my first time dealing with Ubuntu and my first upgrade so I am hoping someone can help. Not sure what the problem can be. I can surf the web with no problems. PS: There was no installing at any point. Just downloading. PSS: The software it managed to download the first time around is now visible in the update manager but don't think I should install as I see in the compiz description it's for v1:0.8-4-0ubuntu2 I figure it's designed for 10.04 and might ruin things further if I install.

    Read the article

  • Linux buffer cache effect on IO writes?

    - by Patrick LeBoutillier
    Hi, I'm copying large files (3 x 30G) between 2 filesystems on a Linux server (kernel 2.6.37, 16 cores, 32G RAM) and I'm getting poor performance. I suspect that the usage of the buffer cache is killing the I/O performance. To try and narrow down the problem I used fio directly on the SAS disk to monitor the performance. Here is the output of 2 fio runs (the first with direct=1, the second one direct=0): Config: [test] rw=write blocksize=32k size=20G filename=/dev/sda # direct=1 Run 1: test: (g=0): rw=write, bs=32K-32K/32K-32K, ioengine=sync, iodepth=1 Starting 1 process Jobs: 1 (f=1): [W] [100.0% done] [0K/205M /s] [0/6K iops] [eta 00m:00s] test: (groupid=0, jobs=1): err= 0: pid=4667 write: io=20,480MB, bw=199MB/s, iops=6,381, runt=102698msec clat (usec): min=104, max=13,388, avg=152.06, stdev=72.43 bw (KB/s) : min=192448, max=213824, per=100.01%, avg=204232.82, stdev=4084.67 cpu : usr=3.37%, sys=16.55%, ctx=655410, majf=0, minf=29 IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% issued r/w: total=0/655360, short=0/0 lat (usec): 250=99.50%, 500=0.45%, 750=0.01%, 1000=0.01% lat (msec): 2=0.01%, 4=0.02%, 10=0.01%, 20=0.01% Run status group 0 (all jobs): WRITE: io=20,480MB, aggrb=199MB/s, minb=204MB/s, maxb=204MB/s, mint=102698msec, maxt=102698msec Disk stats (read/write): sda: ios=0/655238, merge=0/0, ticks=0/79552, in_queue=78640, util=76.55% Run 2: test: (g=0): rw=write, bs=32K-32K/32K-32K, ioengine=sync, iodepth=1 Starting 1 process Jobs: 1 (f=1): [W] [100.0% done] [0K/0K /s] [0/0 iops] [eta 00m:00s] test: (groupid=0, jobs=1): err= 0: pid=4733 write: io=20,480MB, bw=91,265KB/s, iops=2,852, runt=229786msec clat (usec): min=16, max=127K, avg=349.53, stdev=4694.98 bw (KB/s) : min=56013, max=1390016, per=101.47%, avg=92607.31, stdev=167453.17 cpu : usr=0.41%, sys=6.93%, ctx=21128, majf=0, minf=33 IO depths : 1=100.0%, 2=0.0%, 4=0.0%, 8=0.0%, 16=0.0%, 32=0.0%, >=64=0.0% submit : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% complete : 0=0.0%, 4=100.0%, 8=0.0%, 16=0.0%, 32=0.0%, 64=0.0%, >=64=0.0% issued r/w: total=0/655360, short=0/0 lat (usec): 20=5.53%, 50=93.89%, 100=0.02%, 250=0.01%, 500=0.01% lat (msec): 2=0.01%, 4=0.01%, 10=0.01%, 20=0.01%, 50=0.12% lat (msec): 100=0.38%, 250=0.04% Run status group 0 (all jobs): WRITE: io=20,480MB, aggrb=91,265KB/s, minb=93,455KB/s, maxb=93,455KB/s, mint=229786msec, maxt=229786msec Disk stats (read/write): sda: ios=8/79811, merge=7/7721388, ticks=9/32418456, in_queue=32471983, util=98.98% I'm not knowledgeable enough with fio to interpret the results, but I don't expect the overall performance using the buffer cache to be 50% less than with O_DIRECT. Can someone help me interpret the fio output? Are there any kernel tunings that could fix/minimize the problem? Thanks a lot,

    Read the article

  • Mikrotik and NAT/Routing issue

    - by arul
    I have basic NAT/Routing problem with Mikrotik RB750 that I've been unable to solve over the past days. From our ISP we have 26 IP addresses: 10.10.10.192/27, with 10.10.10.193 being the gateway and 10.10.10.194 the first available IP. What I need is that everything connected to ether2 gets a public IP from the DHCP server, and everything connected to ether3 gets a local IP from another DHCP (192.168.100.0/24). All clients should have internet access (I'll figure out bandwidth throttling later) and optimally just 'see' each other (all boxes are Win7, I guess this can ultimately be handled with VPN). Here is my setup: ether1 (10.10.10.194) is connected directly to ISP. 20 clients connected to ether2(10.10.10.195), and another 20 to ether3(10.10.10.196) (both through same 24 port switches). This is my setup, which doesn't work, all 20 clients from ether2 can access the internet, though all comm. seems to come from 10.10.10.194 (is this due to the masquerade on ether1?), and ether3 can't access the internet at all. I think that I need to masquerade ether3, and SNAT/DNAT or NETMAP ether2, but that doesn't work either, I guess that I need to somehow 'wire' both ether2+3 to ether1. Address list: # ADDRESS NETWORK INTERFACE 0 ;;; public 10.10.10.194/32 10.10.10.192 ether1-gateway 1 ;;; inner DHCP 192.168.100.0/24 192.168.100.0 ether3-private 2 ;;; public 10.10.10.195/32 10.10.10.192 ether2-pub 3 ;;; public 10.10.10.196/32 10.10.10.192 ether3-private NAT 0 ;;; ether3 nat chain=srcnat action=src-nat to-addresses=10.10.10.196 src-address=192.168.100.0/24 out-interface=ether3-private 1 ;;; ether3 nat chain=dstnat action=dst-nat to-addresses=192.168.100.0/24 in-interface=ether3-private 2 ;;; ether1 masquerade chain=srcnat action=masquerade to-addresses=10.10.10.194 out-interface=ether1-gateway Routes: # DST-ADDRESS PREF-SRC GATEWAY DISTANCE 0 A S 0.0.0.0/0 ether1-gateway 1 2 A S 10.10.10.192/27 10.10.10.195 ether2-pub 1 3 ADC 10.10.10.192/32 10.10.10.195 ether2-pub 0 ether1-gateway ether3-private 4 ADC 192.168.100.0/24 192.168.100.0 ether3-private 0 IP Pools: # NAME RANGES 0 public-pool 10.10.10.201-10.10.10.220 1 private-pool 192.168.100.2-192.168.100.254 DHCP configs: # NAME INTERFACE RELAY ADDRESS-POOL LEASE-TIME ADD-ARP 0 public-dhcp ether2-pub public-pool 3d 1 private-dhcp ether3-private private-pool 3d Thanks!

    Read the article

  • Problems sending SMTP email to large systems such as Gmail

    - by Martel
    I maintain a mail server. Recently messages sent to valid recipients on gmail, yahoo, and now roadrunner email addresses are bounced with similar messages: Here's one from gmail: The message, sent by [email protected], can not be delivered to following recipient(s): *recipient*@gmail.com There was a fatal SMTP error. Fatal DNS error: exchanger alt4.gmail-smtp-in.l.google.com. does not exist Delivery History Follows: [DLVR 000020 19-12-12 14:21:21] Delivering item 5573 [DLVR 000020 19-12-12 14:21:21] Resolving MX records for domain gmail.com [DLVR 000020 19-12-12 14:21:21] Retrieved 5 MX records for domain gmail.com [DLVR 000020 19-12-12 14:21:21] Delivering mail to 1 recipient(s) at domain gmail.com using exchanger gmail-smtp-in.l.google.com. [DLVR 000020 19-12-12 14:21:33] Host gmail-smtp-in.l.google.com. does not appear to exist... [DLVR 000020 19-12-12 14:21:33] Will try next exchanger [DLVR 000020 19-12-12 14:21:33] Delivering mail to 1 recipient(s) at domain gmail.com using exchanger alt1.gmail-smtp-in.l.google.com. [DLVR 000020 19-12-12 14:21:45] Host alt1.gmail-smtp-in.l.google.com. does not appear to exist... [DLVR 000020 19-12-12 14:21:45] Will try next exchanger [DLVR 000020 19-12-12 14:21:45] Delivering mail to 1 recipient(s) at domain gmail.com using exchanger alt2.gmail-smtp-in.l.google.com. [DLVR 000020 19-12-12 14:21:57] Host alt2.gmail-smtp-in.l.google.com. does not appear to exist... [DLVR 000020 19-12-12 14:21:57] Will try next exchanger [DLVR 000020 19-12-12 14:21:57] Delivering mail to 1 recipient(s) at domain gmail.com using exchanger alt3.gmail-smtp-in.l.google.com. [DLVR 000020 19-12-12 14:22:09] Host alt3.gmail-smtp-in.l.google.com. does not appear to exist... [DLVR 000020 19-12-12 14:22:09] Will try next exchanger [DLVR 000020 19-12-12 14:22:09] Delivering mail to 1 recipient(s) at domain gmail.com using exchanger alt4.gmail-smtp-in.l.google.com. [DLVR 000020 19-12-12 14:22:21] Host alt4.gmail-smtp-in.l.google.com. does not appear to exist... [DLVR 000020 19-12-12 14:22:21] Fatal error - host alt4.gmail-smtp-in.l.google.com. does not exist. Will bounce... [DLVR 000020 19-12-12 14:22:21] Bouncing to sender using bounce address [email protected]... Sometimes these emails get through, other times not. I'm at a loss to explain it.

    Read the article

  • WTH? Upgrading Ubuntu 9.10 to 10.04 Problem: No Internet Connection?

    - by damx
    Earlier today I tried upgrading my Ubuntu 9.10 Karmic Kaola from the update manager. (FYI: all 9.10 updates were applied prior to this) Everything was going well downloading until I got an error dialog informing me that some software packages weren't downloaded because of an Internet connection. Would say it was halfway thru. Anyway, Was told that the software packages that it did download, however, would kept and I figure it's not a big deal. Just run it again. But first ran Firefox to verify my connection as I haven't had any connection problems. But my internet connection was/is fine as evident by this posting. With that cleared, I ran the update manager again, clicked on "Upgrade" and this time I received "Could not download the release notes. Please check your internet connection" huh? This is my first time dealing w/ Ubuntu and my first upgrade so I am hoping someone can help. Not sure what the problem can be. I am can surf the web w/ no problems. Please help. PS: There was no installing at any point. Just downloading. PSS: The software it managed to download the first time around is now visible in the update manager but don't think I should install as I see in the compiz description it's for v1:0.8-4-0ubuntu2 I figure it's designed for 10.04 and might ruin things further if I install

    Read the article

  • Upgrading existing Windows 7 Pro licenses to Ent?

    - by Alex
    From our license info page from MS: Agreement Info: MOLP-Z Std ... License Date: 2011-03-02 Microsoft Invoice No: 91.... Reorder/Upgrade End Date: 2013-03-31 MS Win Pro 7 Sngl Open 1 License Part no: FQC-02872 Qty: 120 MS Win Server CAL 2008 Sng Open 1 Part no: R18-02709 Qty: 120 Now we want to upgrade to Enteprise but the reseller says "Sorry, you need to buy new licenses, 120x Win7Pro (FQC-02872) and 120x SoftwareAssurance (FQC-02368). Are they trying to rip us off?? "Upgrade End Date" still not here and why do we need to re-order exactly same part number (FQC-02872) only 1 year later?

    Read the article

  • Excessive CPU Utilization for Bind 9.8.1 `named` processes

    - by justinzane
    I just noticed that named is eating vast amounts of CPU time for a very small network with only a few domains. Can someone help me determine what is misconfigured, please? Or how to debug this. top top - 14:13:08 up 25 days, 14:16, 1 user, load average: 1.04, 1.04, 1.05 Tasks: 149 total, 1 running, 148 sleeping, 0 stopped, 0 zombie %Cpu(s): 17.3 us, 4.3 sy, 0.0 ni, 78.2 id, 0.1 wa, 0.0 hi, 0.0 si, 0.0 st KiB Mem: 2042776 total, 1347916 used, 694860 free, 249396 buffers KiB Swap: 3976080 total, 30552 used, 3945528 free, 574164 cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 17445 bind 20 0 244m 42m 3124 S 99.4 2.2 2345:03 named rndc stats +++ Statistics Dump +++ (1352931389) ++ Incoming Requests ++ 65869 QUERY ++ Incoming Queries ++ 31809 A 241 NS 3 CNAME 27455 SOA 276 PTR 123 MX 462 TXT 5400 AAAA 7 A6 1 DS 14 DNSKEY 15 SPF 55 AXFR 8 ANY ++ Outgoing Queries ++ [View: internal] 22206 A 509 NS 10 SOA 25 PTR 12 MX 524 TXT 4851 AAAA 62 DNSKEY 19 SPF 3157 DLV [View: external] 87 A 2 NS 80 AAAA 120 DNSKEY 7 DLV [View: _bind] ++ Name Server Statistics ++ 65869 IPv4 requests received 27670 requests with EDNS(0) received 112 TCP requests received 65652 responses sent 20 truncated responses sent 27670 responses with EDNS(0) sent 62920 queries resulted in successful answer 37117 queries resulted in authoritative answer 28482 queries resulted in non authoritative answer 7 queries resulted in referral answer 591 queries resulted in nxrrset 53 queries resulted in SERVFAIL 2081 queries resulted in NXDOMAIN 14530 queries caused recursion 162 duplicate queries received 55 requested transfers completed ++ Zone Maintenance Statistics ++ 109536 IPv4 notifies sent ++ Resolver Statistics ++ [Common] [View: internal] 29362 IPv4 queries sent 2013 IPv6 queries sent 28531 IPv4 responses received 4209 NXDOMAIN received 6 SERVFAIL received 31 FORMERR received 32 EDNS(0) query failures 3359 query retries 836 query timeouts 5348 IPv4 NS address fetches 3271 IPv6 NS address fetches 83 IPv4 NS address fetch failed 2779 IPv6 NS address fetch failed 17421 DNSSEC validation attempted 12731 DNSSEC validation succeeded 4690 DNSSEC NX validation succeeded 21104 queries with RTT 10-100ms 7418 queries with RTT 100-500ms 3 queries with RTT 500-800ms 1 queries with RTT 800-1600ms [View: external] 192 IPv4 queries sent 104 IPv6 queries sent 192 IPv4 responses received 2 NXDOMAIN received 104 query retries 44 IPv4 NS address fetches 44 IPv6 NS address fetches 1 IPv4 NS address fetch failed 1 IPv6 NS address fetch failed 4 DNSSEC validation attempted 3 DNSSEC validation succeeded 1 DNSSEC NX validation succeeded 152 queries with RTT 10-100ms 40 queries with RTT 100-500ms [View: _bind] ++ Cache DB RRsets ++ [View: internal (Cache: internal)] 2007 A 652 NS 131 CNAME 1 MX 32 TXT 421 AAAA 28 DS 244 RRSIG 110 NSEC 3 DNSKEY 2 !A 2 !TXT 89 !AAAA 2 !SPF 14 !DLV 148 NXDOMAIN [View: external (Cache: external)] 55 A 12 NS 34 AAAA 2 DS 10 RRSIG 1 DNSKEY [View: _bind (Cache: _bind)] ++ Socket I/O Statistics ++ 82958 UDP/IPv4 sockets opened 2118 UDP/IPv6 sockets opened 4 TCP/IPv4 sockets opened 1 TCP/IPv6 sockets opened 82956 UDP/IPv4 sockets closed 2117 UDP/IPv6 sockets closed 58 TCP/IPv4 sockets closed 15 UDP/IPv4 socket bind failures 2117 UDP/IPv6 socket connect failures 29554 UDP/IPv4 connections established 59 TCP/IPv4 connections accepted 2117 UDP/IPv6 send errors 5 UDP/IPv4 recv errors ++ Per Zone Query Statistics ++ --- Statistics Dump --- (1352931389)

    Read the article

  • Should I install Windows 7 on a 3 years old PC?

    - by Jitendra vyas
    This is my PC configuration, Should I upgrade my Windows XP to Windows 7. Currently I'm using Windows XP SP3 32 bit. Now will I get same performance or better performance or bad performance if I install Windows 7 on this system? Or would sticking with XP be better? Memory (RAM): 1472 MB DDR RAM (not DDR 2) CPU Info: AMD Sempron(tm) Processor 2500+ CPU Speed: 1398.7 MHz Sound card: Vinyl AC'97 Audio (WAVE) Display Adapters: VIA/S3G UniChrome Pro IGP | NetMeeting driver | RDPDD Chained DD Network Adapters: Bluetooth Device (Personal Area Network) | WAN (PPP/SLIP) Interface Hard Disks: 300 GB SATA HDD Manufacturer: Phoenix Technologies, LTD Product Make: MS-7142 AC Power Status: OnLine BIOS Info: AT/AT COMPATIBLE | 01/18/06 | VIAK8M - 42302e31 Motherboard: MICRO-STAR INTERNATIONAL CO., LTD MS-7142 Modem: ZTE USB Modem FFFE CDMA :

    Read the article

  • Burn bootable iso image to USB stick using dd: Won't boot (despite USB first in boot sequence)

    - by Nicolas Raoul
    I have installed Ubuntu on a Lenovo Thinkpad R500 2732, and I must update the BIOS. On the Lenovo website, I am offered this: BIOS Update Bootable CD for Windows 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP - ThinkPad R500 I guess a bootable CD that would do a BIOS update is indeed what I need. (still wondering why it says "Windows" though... if it is bootable should not it be OS-agnostic?) Not wanting to waste a CD, I copied the image to my USB stick: sudo dd if=/home/nico/7yuj40uc.iso of=/dev/sdb1 bs=1M And rebooted, after making sure USB is first in the boot sequence. PROBLEM: It does not boot. Did I forget one step? Details about the iso image (readme): ls -lh 7yuj40uc.iso 25M file 7yuj40uc.iso /home/nico/7yuj40uc.iso: # ISO 9660 CD-ROM filesystem data '7YUJ40US ' (bootable) (Scroll to the right: it says "bootable") UNetbootin does not work because it is not a Linux image. Some people on the Internet advise to copy the content of the ISO and do other steps. This ISO has zero ISO content so it would not work. If I mount the ISO, I can see it contains zero files.

    Read the article

  • Increased CF JVM max heap size and now CF service will not start

    - by Erik Vold
    So I went in to ColdFusion Administrator and increased my CF JVM max heap size, then I was told I would need to restart the service, so I stopped the service, and then tried to start it again and got the following error message: Windows could not start the ColdFusion 8 Application Server on Local Computer. For more information, review the System Event Log. If this is a non-Microsoft service, contact the service vendor, and refer to service-specific error code 2. So I went to the Event Viewer application, then took a look at the Application log and saw an error that said: The ColdFusion 8 Application Server service could not be started. Check the server "coldfusion" log files for more information. So I went to my ColdFusion logs directory opened the server.log log file and I don't see anything useful in there or any of the other log files.. Any idea how I can change the JVM heap size back to what it was so that I can start CF again?

    Read the article

  • Configure VPN to access remote LAN network on Windows7

    - by PiotrK
    Situation: I have two Windows7 machines (PC and laptop). I've set PC as VPN server and laptop as VPN client using default built-in W7 network tools. I've disabled use default gateway in remote network on client machine, so client don't try to route all communication through VPN. I've routed port 1723 (TCP/UDP) on NAT to my server and enabled IPSec/PPTP/L2TP passthrough I've put my laptop in indepedent network (basically I've connected it via 3G network), connected to VPN server and checked ipconfig /all I've get: IP Address: 192.168.1.101 Mask: 255.255.255.255 Gateway: (none) LAN mask in server LAN network is 255.255.255.0 - I am surely missing something obvious, but Google doesn't give me any good advices; How can I access local LAN network from remote VPN client? How can I access local shared documents?

    Read the article

  • Setting a Static IP Running FreeBSD8 in VirtualBox hosted on Windows 7

    - by gvkv
    I'm using VirtualBox on Windows 7 (host) to run a FreeBSD (guest) based web server. I`ve assigned a static ip of 192.168.80. 1 to the (virtualized) NIC which is run in bridged mode. The problem is that when I ping an external server (such as google.com) I get a No route to host error: dimetro# ping google.com PING google.com (66.249.90.104): 56 data bytes ping: sendto: No route to host ... I can ping the BSD server from both another virtualized machine and my host machine and from the server, I can ping everything on the network. The router ip is 192.168.1.1/16. ADDENDUM: I have the following lines in /etc/rc.conf on the BSD VM to configure networking: defaultrouter="192.168.1.1" ifconfig_em0="inet 192.168.80.1 netmask 255.255.0.0"

    Read the article

  • Can't connect to exchange thru my smart phone

    - by Hoorayo
    We just moved Exchange server from our company to Local data center. Everything is working except mobile access. There is no problem with receiving and sending email from outlook of my laptop, but I can’t connect to exchange server from my smart phone to receive email. While I am setting up exchange account for my phone(Google) , it recognizes when I put wrong password. But it says “Unable to open connection to server” with right password and ID. Is there any option for IP address for this service when I move my server to different location? Please, help me out for any clue.

    Read the article

  • RHEL5: Can't create sparse file bigger than 256GB in tmpfs

    - by John Kugelman
    /var/log/lastlog gets written to when you log in. The size of this file is based off of the largest UID in the system. The larger the maximum UID, the larger this file is. Thankfully it's a sparse file so the size on disk is much smaller than the size ls reports (ls -s reports the size on disk). On our system we're authenticating against an Active Directory server, and the UIDs users are assigned end up being really, really large. Like, say, UID 900,000,000 for the first AD user, 900,000,001 for the second, etc. That's strange but should be okay. It results in /var/log/lastlog being huuuuuge, though--once an AD user logs in lastlog shows up as 280GB. Its real size is still small, thankfully. This works fine when /var/log/lastlog is stored on the hard drive on an ext3 filesystem. It breaks, however, if lastlog is stored in a tmpfs filesystem. Then it appears that the max file size for any file on the tmpfs is 256GB, so the sessreg program errors out trying to write to lastlog. Where is this 256GB limit coming from, and how can I increase it? As a simple test for creating large sparse files I've been doing: dd if=/dev/zero of=sparse-file bs=1 count=1 seek=300GB I've tried Googling for "tmpfs max file size", "256GB filesystem limit", "linux max file size", things like that. I haven't been able to find much. The only mention of 256GB I can find is that ext3 filesystems with 2KB blocks are limited to 256GB files. But our hard drives are formatted with 4K blocks so that doesn't seem to be it--not to mention this is happening in a tmpfs mounted ON TOP of the hard drive so the ext3 partition shouldn't be a factor. This is all happening on a 64-bit Red Hat Enterprise Linux 5.4 system. Interestingly, on my personal development machine, which is a 32-bit Fedora Core 6 box, I can create 300GB+ files in tmpfs filesystems no problem. On the RHEL5.4 systems it is no go.

    Read the article

  • Safer RAID5 rebuilds using partially failed disks?

    - by arcticmac
    There have been lots of articles posted recently about how RAID5 is dangerous because of long resilver times, and in particular because of increasing chances of encountering a URE during the resilver. Obviously this is a significant concern. However, it seems that in many cases of interest (as long as you're keeping some kind of eye on your disks), when it comes time to rebuild the array, the disk that I'm replacing is still mostly readable. If you try to explain this predicament to the average layperson, they are typically very confused as to why you have two almost completely functional disks but can't produce one working array. It seems to me that there ought to be some way to take advantage of this to make rebuilds safer, as long as I'm willing to have the RAID5 be read-only for a couple of days while it rebuilds. Conceptually, what I have in mind looks something like this: When a disk fails, immediately take the RAID5 offline or mount it read-only Attach a new disk (either in a spare bay, or externally via eSATA) and begin rebuilding it to replace the failed one. If known, perhaps start with the stripes in which the failure occurred, to minimize the chances of losing those if another disk fails. In the event that a second disk experiences a URE or other failure during the rebuild, try to source that data from the disk that is being replaced. Presumably if this happens, more rebuilding would be necessary. When complete, shut down the server, swap the replacement drive into the original bay if desired, and bring the array back up. Obviously such a process would not be appropriate for applications where uptime is critical or data loss cannot be tolerated, but it seems to me that this could help considerably to improve the reliability of RAID5. I assume that there's not a good way to implement a recovery like this at present, given that I haven't seen any indication of tools that are designed to do this, and that it seems like it would be rather obtuse to work out manually. Are there also technical issues with it that I haven't thought of (I'm still fairly new to RAID stuff)? Any thoughts on how hard something like this would be to implement (e.g. in linux md raid)?

    Read the article

  • HOSTS ignored when disconnected [closed]

    - by Synetech
    Problem I’m seeing a strange and extremely frustrating problem. Any system that is not connect to the Internet (Windows 7 shows the no Internet access icon because it cannot constantly ping Microsoft’s servers) cannot even access locally hosted servers. Hypothesis The problem appears to be that the HOSTS file is not being used to resolve DNS entries when there are no active NICs. Tests / Reproduction You can reproduce it as so: Disconnect a system from the Internet (make sure all wired and wireless connections are disconnected). If necessary, add an entry to the HOSTS file (e.g., 127.0.0.1 foobar or 127.0.0.1 foobar.com) Open a command-prompt Type ping foobar or ping foobar.com Observations The screenshots below show a clear and demonstrative example. In the first snap, a laptop is connected to a router wirelessly. The HOSTS file has only three entries and they resolve just fine. In the second snap, the wireless radio is turned off, so the entries in the HOSTS file are ignored. Moreover, notice that pinging localhost still works even without any active NICs (as does 127.0.0.1), but it is using the IPv6 address (must be hard-coded). You can see the same results in Windows XP with no IPv6 installed, so it has nothing to do with IPv6. I tried pining what should have resolved to 127.0.0.1 while the desktop system (with no wireless NICs) was connected via its Ethernet adapter, then again after pulling the cable from the router and waiting a couple of seconds, then again after plugging the cable back in. The same thing happens if instead of pulling out the cable, the NIC is disabled through software (the [Disable] button in the NIC’s Status dialog or via Device Manager). Conclusions It looks as though the HOSTS file is only being read and used if there is an active NIC, otherwise it is being ignored. This makes some sense in that if there are no active network adapters, then presumably there will not be any network activity, and thus no need to resolve host names via the HOSTS file. This assumption is specious however because it precludes locally hosted virtual servers. The HOSTS file should be used regardless of external DNS server connectivity, otherwise you cannot use simple/consistent/testing-production names for locally hosted servers when not connected to the Internet (for example web servers; help servers for Visual Studio, 3dsmax, etc.; and so on). Question Does anyone know how to force Windows to use the HOSTS file even if there are no active NICs? Appendix Figure 1: While the wireless NIC is connected to the router (the cable-modem is in standby, so no external Internet connectivity). Figure 2: With the wireless radio turned off (the Ethernet port is not unconnected in both cases). Figure 3: Same results in XP with no IPv6

    Read the article

  • OpenSSH does not accept public key?

    - by Bob
    I've been trying to solve this for a while, but I'm admittedly quite stumped. I just started up a new server and was setting up OpenSSH to use key-based SSH logins, but I've run into quite a dilemma. All the guides are relatively similar, and I was following them closely (despite having done this once before). I triple checked my work to see if I would notice some obvious screw up - but nothing is apparent. As far as I can tell, I haven't done anything wrong (and I've checked very closely). If it's any help, on my end I'm using Cygwin and the server is running Ubuntu 12.04.1 LTS. Anyways, here is the output (I've removed/censored some parts for privacy (primarily anything with my name, website, or its IP address), but I can assure you that nothing is wrong there): $ ssh user@host -v OpenSSH_5.9p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Connecting to host [ipaddress] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/id_rsa type 1 debug1: identity file /home/user/.ssh/id_rsa-cert type -1 debug1: identity file /home/user/.ssh/id_dsa type -1 debug1: identity file /home/user/.ssh/id_dsa-cert type -1 debug1: identity file /home/user/.ssh/id_ecdsa type -1 debug1: identity file /home/user/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.9p1 Debian-5ubuntu1 debug1: match: OpenSSH_5.9p1 Debian-5ubuntu1 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.9 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 24:68:c3:d8:13:f8:61:94:f2:95:34:d1:e2:6d:e7:d7 debug1: Host 'host' is known and matches the ECDSA host key. debug1: Found key in /home/user/.ssh/known_hosts:2 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/user/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /home/user/.ssh/id_dsa debug1: Trying private key: /home/user/.ssh/id_ecdsa debug1: No more authentication methods to try. Permission denied (publickey). What can I do to resolve my problem?

    Read the article

  • broken apache .htaccess (mod_rewrite)

    - by Tim
    Hey there, I'm running into an apache mod_rewrite configuration issue on one of our machines. Has anyone encountered / overcome anyone of these issues. URL1 ( http://www.uppereast.com ) is not being redirected to URL2 ( http://www.nyclocalliving.com ). This definitely worked in my test environment where a localhost address was rewritten to URL2 ( RewriteRule ^http://upe.localhost$ http://www.nyclocalliving.com ). I'm trying to get the all of the redirect rules working ( 2200 + ), but the 'http://www.nyclocalliving.com' site encounters a server error if I use more that 1000 or more rules. A) .htaccess file - I've tried the simplest approach which worked in a local environment 75 # Various rewrite rules. 76 <IfModule mod_rewrite.c> 77 RewriteEngine on 78 79 # BEGIN new URL Mapping rules 80 #RewriteRule ^http://www.uppereast.com/$ http://www.nyclocalliving.com ... 2307 #RewriteRule ^http://www.uppereast.com/zipcodechange.html$ http://www.nyclocalliving.com/zip-code-change fig. 1 B) /var/log/httpd/error_log file - there are these seg. fault errors when I enable the first rule ( line 80 ). no error logs otherwise. 1893 [Fri Sep 25 17:53:46 2009] [notice] Digest: generating secret for digest authentication ... 1894 [Fri Sep 25 17:53:46 2009] [notice] Digest: done 1895 [Fri Sep 25 17:53:46 2009] [notice] Apache/2.2.3 (CentOS) configured -- resuming normal operations 1896 [Fri Sep 25 17:53:47 2009] [notice] child pid 29774 exit signal Segmentation fault (11) 1897 [Fri Sep 25 17:53:47 2009] [notice] child pid 29775 exit signal Segmentation fault (11) 1898 [Fri Sep 25 17:53:47 2009] [notice] child pid 29776 exit signal Segmentation fault (11) 1899 [Fri Sep 25 17:53:47 2009] [notice] child pid 29777 exit signal Segmentation fault (11) 1900 [Fri Sep 25 17:53:47 2009] [notice] child pid 29778 exit signal Segmentation fault (11) 1901 [Fri Sep 25 17:53:47 2009] [notice] child pid 29779 exit signal Segmentation fault (11) fig. 2 C) Some more debug information from the shell; the mod_rewrite is turned on and this is the machine architecture 1 # apachectl -t -D DUMP_MODULES | more 2 Loaded Modules: 3 core_module (static) 4 ... 5 rewrite_module (shared) 1 # uname -a 2 Linux RegionalWeb 2.6.24-23-xen #1 SMP Mon Jan 26 03:09:12 UTC 2009 x86_64 x86_64 x86_64 GNU/Linux fig. 3 I looked into some previous posts (http://serverfault.com/questions/18744/htaccess-not-working-modrewrite), but didn't find a solution for this. I'm sure there's a small switch somewhere that I'm missing. Thanks in advance Tim

    Read the article

  • Shell command slow when using pipe, fast with intermediate file

    - by plang
    Does anyone understand this huge difference in processing time, when using an intermediate file, or when using a pipe? I'm converting tiff to pdf using standard tools on a fresh debian squeeze server. A standard way of doing this is to convert to ps first. Without pipe: root@web5:~# time tiff2ps test.tif > test.ps real 0m0.860s user 0m0.744s sys 0m0.112s root@web5:~# time ps2pdf13 -sPAPERSIZE=a4 test.ps > test.pdf real 0m0.667s user 0m0.612s sys 0m0.060s With pipe: root@web5:~# time tiff2ps test.tif | ps2pdf13 -sPAPERSIZE=a4 - > test.pdf real 1m6.098s user 0m15.861s sys 0m50.9 During the last command, gs process is at 100% all the time. Update: Here is an strace output for the ps generation: root@web5:~# strace tiff2ps test.tif > test.ps execve("/usr/bin/tiff2ps", ["tiff2ps", "test.tif"], [/* 28 vars */]) = 0 brk(0) = 0x1395000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a1937000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=21735, ...}) = 0 mmap(NULL, 21735, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fb5a1931000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libtiff.so.4", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\200\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=405128, ...}) = 0 mmap(NULL, 2501416, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fb5a14b9000 mprotect(0x7fb5a151a000, 2093056, PROT_NONE) = 0 mmap(0x7fb5a1719000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x60000) = 0x7fb5a1719000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libjpeg.so.62", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\3408\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=145048, ...}) = 0 mmap(NULL, 2240080, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fb5a1296000 mprotect(0x7fb5a12b9000, 2093056, PROT_NONE) = 0 mmap(0x7fb5a14b8000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7fb5a14b8000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libz.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\"\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=93936, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a1930000 mmap(NULL, 2188976, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fb5a107f000 mprotect(0x7fb5a1096000, 2093056, PROT_NONE) = 0 mmap(0x7fb5a1295000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7fb5a1295000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360>\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=530736, ...}) = 0 mmap(NULL, 2625768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fb5a0dfd000 mprotect(0x7fb5a0e7d000, 2097152, PROT_NONE) = 0 mmap(0x7fb5a107d000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x80000) = 0x7fb5a107d000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\355\1\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=1437064, ...}) = 0 mmap(NULL, 3545160, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fb5a0a9b000 mprotect(0x7fb5a0bf4000, 2093056, PROT_NONE) = 0 mmap(0x7fb5a0df3000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x158000) = 0x7fb5a0df3000 mmap(0x7fb5a0df8000, 18504, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fb5a0df8000 close(3) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a192f000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a192e000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a192d000 arch_prctl(ARCH_SET_FS, 0x7fb5a192e700) = 0 mprotect(0x7fb5a0df3000, 16384, PROT_READ) = 0 mprotect(0x7fb5a107d000, 4096, PROT_READ) = 0 mprotect(0x7fb5a1939000, 4096, PROT_READ) = 0 munmap(0x7fb5a1931000, 21735) = 0 open("test.tif", O_RDONLY) = 3 brk(0) = 0x1395000 brk(0x13b6000) = 0x13b6000 read(3, "II*\0\10\0\0\0", 8) = 8 fstat(3, {st_mode=S_IFREG|0644, st_size=1825656, ...}) = 0 mmap(NULL, 1825656, PROT_READ, MAP_SHARED, 3, 0) = 0x7fb5a176f000 open("/proc/meminfo", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a1936000 read(4, "MemTotal: 2090844 kB\nMemF"..., 1024) = 1024 close(4) = 0 munmap(0x7fb5a1936000, 4096) = 0 write(2, "TIFFReadDirectory: ", 19TIFFReadDirectory: ) = 19 write(2, "Warning, ", 9Warning, ) = 9 write(2, "test.tif: wrong data type 7 for "..., 59test.tif: wrong data type 7 for "RichTIFFIPTC"; tag ignored) = 59 write(2, ".\n", 2. ) = 2 gettimeofday({1334836895, 374666}, NULL) = 0 fstat(1, {st_mode=S_IFREG|0664, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a1936000 open("/etc/localtime", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=1892, ...}) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=1892, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fb5a1935000 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\4\0\0\0\4\0\0\0\0"..., 4096) = 1892 lseek(4, -1217, SEEK_CUR) = 675 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\6\0\0\0\6\0\0\0\0"..., 4096) = 1217 close(4) = 0 munmap(0x7fb5a1935000, 4096) = 0 write(1, "%!PS-Adobe-3.0 EPSF-3.0\n%%Creato"..., 4096) = 4096 write(1, "fffffffffffffffffffffffffffff\nff"..., 4096) = 4096 write(1, "ffffffffffffffffffff\nfffffffffff"..., 4096) = 4096 write(1, "fffffffffff\nffffffffffffffffffff"..., 4096) = 4096 write(1, "ff\nfffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffff\nfffffff"..., 4096) = 4096 Here is an strace output for the piped version: PS generation seems to be much slower when output is piped into ps2pdf13. root@web5:~# strace tiff2ps test.tif | ps2pdf13 -sPAPERSIZE=a4 - > test.pdf execve("/usr/bin/tiff2ps", ["tiff2ps", "test.tif"], [/* 28 vars */]) = 0 brk(0) = 0x1b97000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208bb1000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=21735, ...}) = 0 mmap(NULL, 21735, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f9208bab000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libtiff.so.4", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0P\200\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=405128, ...}) = 0 mmap(NULL, 2501416, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9208733000 mprotect(0x7f9208794000, 2093056, PROT_NONE) = 0 mmap(0x7f9208993000, 12288, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x60000) = 0x7f9208993000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libjpeg.so.62", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\3408\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=145048, ...}) = 0 mmap(NULL, 2240080, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9208510000 mprotect(0x7f9208533000, 2093056, PROT_NONE) = 0 mmap(0x7f9208732000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x22000) = 0x7f9208732000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/usr/lib/libz.so.1", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\260\"\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=93936, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208baa000 mmap(NULL, 2188976, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f92082f9000 mprotect(0x7f9208310000, 2093056, PROT_NONE) = 0 mmap(0x7f920850f000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x16000) = 0x7f920850f000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/libm.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\360>\0\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0644, st_size=530736, ...}) = 0 mmap(NULL, 2625768, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9208077000 mprotect(0x7f92080f7000, 2097152, PROT_NONE) = 0 mmap(0x7f92082f7000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x80000) = 0x7f92082f7000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/libc.so.6", O_RDONLY) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\240\355\1\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=1437064, ...}) = 0 mmap(NULL, 3545160, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7f9207d15000 mprotect(0x7f9207e6e000, 2093056, PROT_NONE) = 0 mmap(0x7f920806d000, 20480, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x158000) = 0x7f920806d000 mmap(0x7f9208072000, 18504, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7f9208072000 close(3) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208ba9000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208ba8000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208ba7000 arch_prctl(ARCH_SET_FS, 0x7f9208ba8700) = 0 mprotect(0x7f920806d000, 16384, PROT_READ) = 0 mprotect(0x7f92082f7000, 4096, PROT_READ) = 0 mprotect(0x7f9208bb3000, 4096, PROT_READ) = 0 munmap(0x7f9208bab000, 21735) = 0 open("test.tif", O_RDONLY) = 3 brk(0) = 0x1b97000 brk(0x1bb8000) = 0x1bb8000 read(3, "II*\0\10\0\0\0", 8) = 8 fstat(3, {st_mode=S_IFREG|0644, st_size=1825656, ...}) = 0 mmap(NULL, 1825656, PROT_READ, MAP_SHARED, 3, 0) = 0x7f92089e9000 open("/proc/meminfo", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0444, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208bb0000 read(4, "MemTotal: 2090844 kB\nMemF"..., 1024) = 1024 close(4) = 0 munmap(0x7f9208bb0000, 4096) = 0 write(2, "TIFFReadDirectory: ", 19TIFFReadDirectory: ) = 19 write(2, "Warning, ", 9Warning, ) = 9 write(2, "test.tif: wrong data type 7 for "..., 59test.tif: wrong data type 7 for "RichTIFFIPTC"; tag ignored) = 59 write(2, ".\n", 2. ) = 2 gettimeofday({1334836513, 114140}, NULL) = 0 fstat(1, {st_mode=S_IFIFO|0600, st_size=0, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208bb0000 open("/etc/localtime", O_RDONLY) = 4 fstat(4, {st_mode=S_IFREG|0644, st_size=1892, ...}) = 0 fstat(4, {st_mode=S_IFREG|0644, st_size=1892, ...}) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7f9208baf000 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\4\0\0\0\4\0\0\0\0"..., 4096) = 1892 lseek(4, -1217, SEEK_CUR) = 675 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\6\0\0\0\6\0\0\0\0"..., 4096) = 1217 close(4) = 0 munmap(0x7f9208baf000, 4096) = 0 write(1, "%!PS-Adobe-3.0 EPSF-3.0\n%%Creato"..., 4096) = 4096 write(1, "fffffffffffffffffffffffffffff\nff"..., 4096) = 4096 write(1, "ffffffffffffffffffff\nfffffffffff"..., 4096) = 4096 write(1, "fffffffffff\nffffffffffffffffffff"..., 4096) = 4096 write(1, "ff\nfffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 write(1, "ffffffffffffffffffffffffffffffff"..., 4096) = 4096 ...etc...

    Read the article

  • Mysql hosting for application backend

    - by churnd
    I've been asked to help set up a way for a volunteer animal rescue organization to use an application to keep track of animals they've rescued. This application already exists, and can use it's own local database or connect to a MySQL database server. Since there are several volunteers spread out over a large region, a database server would be the best way to go. Money is a big problem, obviously. So, I'm looking for a very cheap or hopefully free database server or webhost that allows tcp/ip connections to their database servers. Backups will be handled on our end, so basically I just need the hosted mysql server. I've seen 000webhost.com, x10hosting, and xtreemhost, which all look promising, but they either aren't clear on remote mysql connections, or don't allow it at all. Looking forward to your recommendations! The animals thank you! :)

    Read the article

  • Setup Entourage for Exchange via HTTP communication

    - by Johandk
    Our ISP set up a hosted exchange server for all our mail. I've setup all our Outlook users with no problems. We have two people using Mac OSX Leopard and Entourage. Entourage has the option of adding an Exchange account, but I have no idea how to tell it to connect to exchange via HTTP. Heres an excerpt from the client setup docs the hosting company sent me for Outlook: 1 .Go to control panel 2. Select ‘Mail’ 3. Select ‘Email accounts’ Under the E-mail tab select ‘New’ Select ‘Manually configure server settings......’ - click next Select ‘Microsoft Exchange’ – click next Complete details as below with Microsoft Exchange Server as: [server address] Do not select ‘Check Name’. Instead select ‘More Settings’. Go to the Connection tab, and select the bottom option ‘Connect to Microsoft Exchange using HTTP’. And then select the ‘Exchange Proxy Settings’ button. Enter Proxy server for Exchange Check Only connect to proxy servers that have this principal name in their certificate, Enter msstd:[servername] Proxy Authentication - select Basic Authentication Select OK, and again, so that you return to the main screen. Now select ‘Check Name’. Enter Username and Password: The username should now be the full name and underlined. If so select next, and then finish. Next time you open Outlook, enter username and password Any help GREATLY appreciated.

    Read the article

< Previous Page | 2041 2042 2043 2044 2045 2046 2047 2048 2049 2050 2051 2052  | Next Page >