Search Results

Search found 14821 results on 593 pages for 'device driver'.

Page 205/593 | < Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >

  • Can't find instructions how to use Windows 7 drivers on Windows Server 2008 R2

    - by Robert Koritnik
    Maybe I should post this to http://www.serverfault.com. Windows 7 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 doesn't event though it's practically the same OS when it comes to drivers. But I know that this has a very good reason. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are normally desktop machines and would need Windows 7 driver spectrum... Question I know I've been reading about some trick on the internet that first installed Windows 7 on the machine, than do something to get either all Windows 7 driver collection or just those installed, and then install Windows Server 2008 and use those drivers. The thing is: I can't seem to find these instructions on the internet any more. If anybody knows where these are please provide the link for the rest of us.

    Read the article

  • Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

    - by Ben
    I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess. (Edit - One extra thing that may or may not be relevant: it's the 64 bit version of Server 2008 R2)

    Read the article

  • win7 amd64 guest in kvm does not have sound

    - by davidshen84
    hi, my host system is gentoo amd64, guest system is win 7 amd64. the guest system can work, except it does not have sound. i start kvm with -soundhw ac97, QEMU_AUDIO_DRV='alsa', and after i get into the guest system, i can see a 'Multimedia Audio Controller' in the device manager. but win7 cannot find the driver for it. i searched the network for a long time, and i cannot find a driver for intel ac97 for win7 amd64. i also tried -soundhw sb16, es1370, none of them work. please help me fix this.

    Read the article

  • How to capture live camera frames in RGB with DirectShow

    - by Jonny Boy
    I'm implementing live video capture through DirectShow for live processing and display. (Augmented Reality app). I can access the pixels easily enough, but it seems I can't get the SampleGrabber to provide RGB data. The device (an iSight -- running VC++ Express in VMWare) only reports MEDIASUBTYPE_YUY2. After extensive Googling, I still can't figure out whether DirectShow is supposed to provide built-in color space conversion for this sort of thing. Some sites report that there is no YUV<-RGB conversion built in, others report that you just have to call SetMediaType on your ISampleGrabber with an RGB subtype. Any advice is greatly appreciated, I'm going nuts on this one. Code provided below. Please note that The code works, except that it doesn't provide RGB data I'm aware that I can implement my own conversion filter, but this is not feasible because I'd have to anticipate every possible device format, and this is a relatively small project // Playback IGraphBuilder *pGraphBuilder = NULL; ICaptureGraphBuilder2 *pCaptureGraphBuilder2 = NULL; IMediaControl *pMediaControl = NULL; IBaseFilter *pDeviceFilter = NULL; IAMStreamConfig *pStreamConfig = NULL; BYTE *videoCaps = NULL; AM_MEDIA_TYPE **mediaTypeArray = NULL; // Device selection ICreateDevEnum *pCreateDevEnum = NULL; IEnumMoniker *pEnumMoniker = NULL; IMoniker *pMoniker = NULL; ULONG nFetched = 0; HRESULT hr = CoInitializeEx(NULL, COINIT_MULTITHREADED); // Create CreateDevEnum to list device hr = CoCreateInstance(CLSID_SystemDeviceEnum, NULL, CLSCTX_INPROC_SERVER, IID_ICreateDevEnum, (PVOID *)&pCreateDevEnum); if (FAILED(hr)) goto ReleaseDataAndFail; // Create EnumMoniker to list devices hr = pCreateDevEnum->CreateClassEnumerator(CLSID_VideoInputDeviceCategory, &pEnumMoniker, 0); if (FAILED(hr)) goto ReleaseDataAndFail; pEnumMoniker->Reset(); // Find desired device while (pEnumMoniker->Next(1, &pMoniker, &nFetched) == S_OK) { IPropertyBag *pPropertyBag; TCHAR devname[256]; // bind to IPropertyBag hr = pMoniker-&gt;BindToStorage(0, 0, IID_IPropertyBag, (void **)&amp;pPropertyBag); if (FAILED(hr)) { pMoniker-&gt;Release(); continue; } VARIANT varName; VariantInit(&amp;varName); HRESULT hr = pPropertyBag-&gt;Read(L"DevicePath", &amp;varName, 0); if (FAILED(hr)) { pMoniker-&gt;Release(); pPropertyBag-&gt;Release(); continue; } char devicePath[DeviceInfo::STRING_LENGTH_MAX] = ""; wcstombs(devicePath, varName.bstrVal, DeviceInfo::STRING_LENGTH_MAX); if (strcmp(devicePath, deviceId) == 0) { // Bind Moniker to Filter pMoniker-&gt;BindToObject(0, 0, IID_IBaseFilter, (void**)&amp;pDeviceFilter); break; } pMoniker-&gt;Release(); pPropertyBag-&gt;Release(); } if (pDeviceFilter == NULL) goto ReleaseDataAndFail; // Create sample grabber IBaseFilter *pGrabberF = NULL; hr = CoCreateInstance(CLSID_SampleGrabber, NULL, CLSCTX_INPROC_SERVER, IID_IBaseFilter, (void**)&pGrabberF); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabberF->QueryInterface(IID_ISampleGrabber, (void**)&pGrabber); if (FAILED(hr)) goto ReleaseDataAndFail; // Create FilterGraph hr = CoCreateInstance(CLSID_FilterGraph, NULL, CLSCTX_INPROC, IID_IGraphBuilder, (LPVOID *)&pGraphBuilder); if (FAILED(hr)) goto ReleaseDataAndFail; // create CaptureGraphBuilder2 hr = CoCreateInstance(CLSID_CaptureGraphBuilder2, NULL, CLSCTX_INPROC, IID_ICaptureGraphBuilder2, (LPVOID *)&pCaptureGraphBuilder2); if (FAILED(hr)) goto ReleaseDataAndFail; // set FilterGraph hr = pCaptureGraphBuilder2->SetFiltergraph(pGraphBuilder); if (FAILED(hr)) goto ReleaseDataAndFail; // get MediaControl interface hr = pGraphBuilder->QueryInterface(IID_IMediaControl, (LPVOID *)&pMediaControl); if (FAILED(hr)) goto ReleaseDataAndFail; // Add filters hr = pGraphBuilder->AddFilter(pDeviceFilter, L"Device Filter"); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGraphBuilder->AddFilter(pGrabberF, L"Sample Grabber"); if (FAILED(hr)) goto ReleaseDataAndFail; // Set sampe grabber options AM_MEDIA_TYPE mt; ZeroMemory(&mt, sizeof(AM_MEDIA_TYPE)); mt.majortype = MEDIATYPE_Video; mt.subtype = MEDIASUBTYPE_RGB32; hr = pGrabber->SetMediaType(&mt); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabber->SetOneShot(FALSE); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabber->SetBufferSamples(TRUE); if (FAILED(hr)) goto ReleaseDataAndFail; // Get stream config interface hr = pCaptureGraphBuilder2->FindInterface(NULL, &MEDIATYPE_Video, pDeviceFilter, IID_IAMStreamConfig, (void **)&pStreamConfig); if (FAILED(hr)) goto ReleaseDataAndFail; int streamCapsCount = 0, capsSize, bestFit = -1, bestFitPixelDiff = 1000000000, desiredPixelCount = _width * _height, bestFitWidth = 0, bestFitHeight = 0; float desiredAspectRatio = (float)_width / (float)_height; hr = pStreamConfig->GetNumberOfCapabilities(&streamCapsCount, &capsSize); if (FAILED(hr)) goto ReleaseDataAndFail; videoCaps = (BYTE *)malloc(capsSize * streamCapsCount); mediaTypeArray = (AM_MEDIA_TYPE **)malloc(sizeof(AM_MEDIA_TYPE *) * streamCapsCount); for (int i = 0; i < streamCapsCount; i++) { hr = pStreamConfig->GetStreamCaps(i, &mediaTypeArray[i], videoCaps + capsSize * i); if (FAILED(hr)) continue; VIDEO_STREAM_CONFIG_CAPS *currentVideoCaps = (VIDEO_STREAM_CONFIG_CAPS *)(videoCaps + capsSize * i); int closestWidth = MAX(currentVideoCaps-&gt;MinOutputSize.cx, MIN(currentVideoCaps-&gt;MaxOutputSize.cx, width)); int closestHeight = MAX(currentVideoCaps-&gt;MinOutputSize.cy, MIN(currentVideoCaps-&gt;MaxOutputSize.cy, height)); int pixelDiff = ABS(desiredPixelCount - closestWidth * closestHeight); if (pixelDiff &lt; bestFitPixelDiff &amp;&amp; ABS(desiredAspectRatio - (float)closestWidth / (float)closestHeight) &lt; 0.1f) { bestFit = i; bestFitPixelDiff = pixelDiff; bestFitWidth = closestWidth; bestFitHeight = closestHeight; } } if (bestFit == -1) goto ReleaseDataAndFail; AM_MEDIA_TYPE *mediaType; hr = pStreamConfig->GetFormat(&mediaType); if (FAILED(hr)) goto ReleaseDataAndFail; VIDEOINFOHEADER *videoInfoHeader = (VIDEOINFOHEADER *)mediaType->pbFormat; videoInfoHeader->bmiHeader.biWidth = bestFitWidth; videoInfoHeader->bmiHeader.biHeight = bestFitHeight; //mediaType->subtype = MEDIASUBTYPE_RGB32; hr = pStreamConfig->SetFormat(mediaType); if (FAILED(hr)) goto ReleaseDataAndFail; pStreamConfig->Release(); pStreamConfig = NULL; free(videoCaps); videoCaps = NULL; free(mediaTypeArray); mediaTypeArray = NULL; // Connect pins IPin *pDeviceOut = NULL, *pGrabberIn = NULL; if (FindPin(pDeviceFilter, PINDIR_OUTPUT, 0, &pDeviceOut) && FindPin(pGrabberF, PINDIR_INPUT, 0, &pGrabberIn)) { hr = pGraphBuilder->Connect(pDeviceOut, pGrabberIn); if (FAILED(hr)) goto ReleaseDataAndFail; } else { goto ReleaseDataAndFail; } // start playing hr = pMediaControl->Run(); if (FAILED(hr)) goto ReleaseDataAndFail; hr = pGrabber->GetConnectedMediaType(&mt); // Set dimensions width = bestFitWidth; height = bestFitHeight; _width = bestFitWidth; _height = bestFitHeight; // Allocate pixel buffer pPixelBuffer = (unsigned *)malloc(width * height * 4); // Release objects pGraphBuilder->Release(); pGraphBuilder = NULL; pEnumMoniker->Release(); pEnumMoniker = NULL; pCreateDevEnum->Release(); pCreateDevEnum = NULL; return true;

    Read the article

  • Need help making an ODBC MySQL Connection

    - by Andy Moore
    Short Version: How do I connect from PowerShell to an ODBC 5.1 MySQL Driver? I can't seem to find any connection strings that accurately have a "Provider" field for this particular instance. (See bottom of this question for examples/errors) ===== Long Version: I'm not a server guy, and I've been handed the task of setting up PowerGadgets on our network. I have a MySQL server running on a Linux box, that is configured for remote access and has a user defined for remote access as well. On my windows desktop PC, I have PowerGadgets installed. I installed the MySQL ODBC 5.1 connector, and went to Control Panel Data Sources and set up a User DSN connection to the database. The connection, user, and pass seem to be correct because it lists the tables of the database in my windows control panel. Where I'm running into trouble is in 3 places in PowerGadgets: When selecting a data source, I can select "SQL Server". Inputting the servers IP address does not work and I can't get this option to work at all. When selecting a data source, I can select "OleDB". This screen has a wizard on it, that appears to populate all the correct information (including database table names!) for me. "Test Connection" runs great. But if I try to complete the wizard, I get the error "The .NET Framework data provider for OLEDB does not support the MS Ole DB provider for ODBC Drivers." When selecting a data source, I can select "ODBC". This screen does not have a wizard and I cannot figure out a "connection string" that works. Typically it will respond with the error "The field 'Provider' is missing". Googling ODBC connection strings doesn't reveal any examples with a "provider" field and have no idea what to put in here. The connection string (for #2) above contains "SQLOLEDB" as a provider, and upon inputting that value into this connection string I get the same connection error that #2 gets. I believe I can solve my problems by figuring out a connection string for #3 but don't know where to get started. (PowerGadgets also allows for PowerShell support but I believe I will run into the same problem there) == Here's my current PowerShell connection that doesn't work: invoke-sql -connection "Driver={MySQL ODBC 5.1 Driver};Initial Catalog=hq_live;Data Source=HQDB" -sql "Select * FROM accounts" Spits back the error: "Invoke-Sql : An OLE DB Provider was not specified in the ConnectionString. An example would be, 'Provider=SQLOLEDB;'. == Another string that doesn't work: invoke-sql -connection "Provider=MSDASQL.1;Persist Security Info=False;Data Source=HQDB;Initial Catalog=hq_live" -sql "select * from accounts" And the error: The .Net Framework Data Provider for OLEDB (System.Data.OleDb) does not support the Microsoft OLE DB Provider for ODBC Drivers (MSDASQL). Use the .Net Framework Data Provider for ODBC (System.Data.Odbc).

    Read the article

  • Intel 520 SSD drives not working with lsi controller on VMware esxi 5

    - by Michael
    We have a problem with our LSI 9266 controller. LSI have vmware drivers which normally show the health status of connected drives, raid controller, battery etc from within the vSphere Client. This driver also allows connectivity from the LSI MSM utility from a windows workstation. The problem is as soon as I connect my intel 520 SSD drives the health status in the vsphere client disappears, also we lose connectivity via the LSI MSM utlity. Any other drives we test are fine, 1TB SAS drives, other SSD drives etc are all OK. The Intel drives are on the compatability list and are supported by LSI but dont work with the VMware driver. If I install a windows OS on the physical server we have no problems. I have logged a ticket with LSI but they havent been very helpful. I am trying to find other people that may have had the same issue and maybe even a fix

    Read the article

  • logparser Message with error codes

    - by nsr81
    Hi All, Is there anyway to get complete error message using LogParser? When I run the following query: logparser -i:EVT -o:NAT "SELECT TimeGenerated,EventID,Message from System WHERE EventTypeName='Error event'" I get the following output: 2009-09-02 19:35:44 7000 The USB Mass Storage Driver service failed to start due to the following error: %%1058 The full "Message" in EventViewer is: Description: The USB Mass Storage Driver service failed to start due to the following error: The service cannot be started, either because it is disabled or because it has no enabled devices associated with it. How can I obtain complete message using logparser?

    Read the article

  • Android 2.2 - and exchange password policy enforcement

    - by Moshe
    Hi, In Android 2.2 site (link text it's written: Improved security with the addition of numeric pin or alpha-numeric password options to unlock device. Exchange administrators can enforce password policy across devices But while I'm using N1 with 2.2 and try to connect to my company exchange server it didn't enforce me to set a password, although connecting to the same server from Windows Mobile 6 device enforce this. I know that exchange server is configured to enforce password. Is there anything special the administrator need to do? Thank you, Moshe

    Read the article

  • C# communicate with RS-232 using VISA

    - by George
    Hi, Does anyone have any C# example code to communicate with a device thru an RS-232 serial port using VISA ? I just want to issuse some simple commands and queries to the device as well as open and close it, of course. Any help or advice would be most appreciated. Regards, George.

    Read the article

  • Running hardware with only 32bit drivers in 64bit windows

    - by Howard
    Recently we had to upgrade a system to handle added HD IP cameras. This upgrade involved an entirely new computer build with the exception of a rather pricey Geovision DVR (PCI/GV1480 series). Apparently while these cards do support Windows 7, they do not support Windows 7 x64. I'm stuck between a rock and a hard place here trying to figure out how we can remedy this, is there a virtualization solution that will allow devices with driver issues to passthru to the Guest OS? I was thinking XPMode may work for this solution however I am unsure if it runs 32bit or 64bit and if it'll allow driver-issue devices to pass to it. Any help would be greatly appreciated, Best Regards, Howard

    Read the article

  • Basic networking problem with Ubuntu 9.04 on Acer Extensa 5635Z laptop

    - by sapporo
    I just installed Ubuntu 9.04 on a brand new Acer Extensa 5635Z laptop, but ethernet networking does't work (wireless doesn't work either, but I'd be happy with ethernet for now). eth0 isn't listed in /etc/network/interfaces: $ cat /etc/network/interfaces auto lo iface lo inet loopback lshw does show the nic, but I can't make much sense out of the information: $ sudo lshw -class network -sanitize *-network DISABLED description: Wireless interface product: AR928X Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:07:00.0 logical name: wmaster0 version: 01 serial: [REMOVED] width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix bus_master cap_list logical ethernet physical wireless configuration: broadcast=yes driver=ath9k latency=0 module=ath9k multicast=yes wireless=IEEE 802.11bgn *-network UNCLAIMED description: Ethernet controller product: Attansic Technology Corp. vendor: Attansic Technology Corp. physical id: 0 bus info: pci@0000:09:00.0 version: c0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd cap_list configuration: latency=0 *-network DISABLED description: Ethernet interface physical id: 1 logical name: pan0 serial: [REMOVED] capabilities: ethernet physical configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes Thanks for your help!

    Read the article

  • How can I change the amount of video memory with a Mobile Intel 4 Series Express Chipset?

    - by user45924
    I have the chipset in the title. The Intel control panel says the following: Intel® Graphics Media Accelerator Driver for Mobile Report Report Date: 8/11/2010 Report Time[hr:mm:ss]: 20:2:54 Driver Version: 8.15.10.2182 Operating System: Windows 7 (6.1.7600) Default Language: English (Canada) DirectX* Version: 10.0 Physical Memory: 3963 MB Minimum Graphics Memory: 128 MB Maximum Graphics Memory: 1759 MB Graphics Memory in Use: 17 MB Processor: Intel64 Family 6 Model 23 Stepping 10 Processor Speed: 1995 MHz Vendor ID: 8086 Device ID: 2A42 Device Revision: 07 Even while playing games, the Graphics Memory in Use only ever goes up to 26 MB. I've looked in the BIOS; there's nothing there. Is there any way I can force it to go higher? Thanks :)

    Read the article

  • Windows does not detect any modems anymore[HSPA]

    - by Shenal Silva
    By an accident i uninstalled my Connect manager (ZTE). but when i re-install it the virtual CD drive is detected but it does not detect the drivers. When i direct to the folder containing the relevant drivers(.sys files) still it doesnt detect. Then i tried a modem of a different brand Huawei the same problem presists As i understand it is not a device(brand) driver specific issue as it does not detect modem(dongles) of any brand. when i plugged in a different USB device(a pen drive) the driver is detected and it works perfectly. Please help me with the issue i have tried system restore but it doesnt work. I want a repair that works without re-installing windows [Edit] I tried Karan's suggested method with usboblivion it didnt work. now im sure that the issue does not deal with the registry

    Read the article

  • GUI for touchscreen panel

    - by Surjya Narayana Padhi
    Hi Geeks, I am planning to design an embedded device which will have atom processor platform and linux OS in it. It will have an 7" touchscreen panel. In stead of going for KDE and GNOME desktops I want to design my small desktop environment for the device. Can anyone please suggest which GUI tool I should use to design a desktop from scratch?

    Read the article

  • Communicating with a MW-3170 magnetic card reader

    - by stukelly
    One of our customers has asked if we can interface with a serial magnetic card reader/encoder from a old EPOS system. The device has no make only the MW-3170 model number. Does anybody know how I can communicate with the device? I am currently looking for a programming manual on Google, without much success.

    Read the article

  • Windows 2003 SP1 terminal server printers Disappear after reboot - HP laserjet 4240

    - by Alex
    had working PCL6 laserjet 4240 driver. needed to downgrade to PCl5, tried but did not get clean install. tried again and it seemed to work (this is 2003 enterprise terminal server SP2) Have over 40 working laserjets (5, 4000, 4100 and 18 of the 4240) After normal nightly reboot the 18 4240 printers were 'gone'. Worked w/Microsoft who said bad HP driver issues - weird since they work on other terminal servers. downloaded latest version, etc. from HP site and can NOT get to work. As soon as I install, then do a Net Stop Spool and Net Start Spooler the printer is 'gone'. Current workaround is to use HP 4000 PCL5 drivers for all of these 4240 printers.

    Read the article

  • Boot Vista x64 with both ICH8 and ICH10 AHCI support

    - by adurity
    I have a situation where I need to boot Windows Vista 64-bit from both a ICH10 and ICH8 AHCI SATA controller. Currently, it is setup to boot from the ICH10, but when I try booting with the ICH8, I get the famed Windows STOP 7B BSOD. How can I add the ICH8 driver so that I can work around this BSOD and boot the system? I have updated to the latest Intel AHCI driver (8.9.0.1023 as of this post) which is supposed to support both chipsets, but I feel I am missing something.

    Read the article

  • j2me MIDP: detecting if phone has a data plan

    - by SB
    Is there a way to determine what kind of data plan a device has so an app provides a less rich experience if a data plan is not available? I imagine the connector factory would still be able to return me an HTTPConnection but it would cost the user serious money for lots of data, and I'd like to be nice and prevent that. I thought there would be a way to query device capabilities in the MIDP API, but maybe it's in CLDC?

    Read the article

  • Windows CE Silverlight Setup

    - by jadeWarlord
    Hi All, I have an embedded device,its includes windows CE 6.0 Build 3112.I want to run silverlight application on this device.I downloaded silverlight application,when I want to install it says "Silverlight is not valid application windows CE" so what can i do? Thx.

    Read the article

  • Can't Install Windows 2008 R2 on Lenovo Laptop With SSD

    - by Ben
    I am trying to install Windows Server 2008 R2 on a new Lenovo X201 or T410 laptop. Setup halts with the following pop-up: A required CD/DVD device driver is missing. If you have a driver floppy disk, CD, DVD, or USB flash drive, please insert it now. Note: If the windows installation media is in the CD/DVD drive you can safely remove it for this step. The CD drive is obviously working, as it's booting from CD to get to this point. The only thing I can think is that it is to do with the fact they have SSD disks in - but that's just a guess.

    Read the article

  • Using Windows 7 drivers in Windows Server 2008 R2

    - by Robert Koritnik
    Maybe I should post this to http://www.serverfault.com. Windows 7 comes with all sorts of signed drivers so there's high probability that all drivers for your machine will be installed during system setup. On the other hand Windows Server 2008 doesn't event though it's practically the same OS when it comes to drivers. But I know that this has a very good reason. It's a server product, not a desktop one. But the thing is that many power users and developers use server OS on their workstations which are normally desktop machines and would need Windows 7 driver spectrum... Question I know I've been reading about some trick on the internet that first installed Windows 7 on the machine, than do something to get either all Windows 7 driver collection or just those installed, and then install Windows Server 2008 and use those drivers. The thing is: I can't seem to find these instructions on the internet any more. If anybody knows where these are please provide the link for the rest of us.

    Read the article

  • Timing the Linux Kernel boot-time optimisation

    - by CVS-2600Hertz-wordpress-com
    I am trying to optimise the boot-up time of linux on an embedded device (not PC) Currently to profile the boot-up sequence, I have enabled the timing info on printk logs. Is this the most optimum way? If not, how do i profile the boot-up sequence (with timing) with minimum overhead? PS: I have a terminal (of the device) over a serial-connection & I use TeraTerm over windows-XP to access it.

    Read the article

  • Buildcraft Minecraft mod causing crashes, NVIDIA-304xx Linux Drivers, KDE

    - by wolfo9999
    All is perfect, 96 fps average. Until an item tries to enter a buildcraft pipe. Tekkit instantly crashes, no error dialog. I have no idea what logs to look at for information on the crash, or how to fix it. OpenGL is enabled in KDE, Driver package is nvidia-304xx lspci output: VGA compatible controller: NVIDIA Corporation GT218 [Quadro FX 380M] (rev a2) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 172b Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d2000000 (32-bit, non-prefetchable) [size=16M] Memory at c0000000 (64-bit, prefetchable) [size=256M] Memory at d0000000 (64-bit, prefetchable) [size=32M] I/O ports at 5000 [size=128] [virtual] Expansion ROM at d3080000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia

    Read the article

  • Manual Duplex printing for Mac (and/or Linux)

    - by chris_l
    My printers don't support automatic duplex printing. I'm looking for a solution for my Mac and Linux computers that I've seen with most Windows printer drivers: Check "Manual duplex" in the printer screen Printer starts printing one side A dialog appears, asking me to flip the pages Printer prints the other side. One thing I can do, is print odd pages, then reopen the dialog and print even pages, but this is very inconvenient, especially when I only want to print a certain page range of the document as the Mac dialog forgets my previous page range every time. It gets even more inconvenient, when printing 2-up double sided, or when changing additional settings for this one printout. Is there maybe some tool, that can do this? Or maybe a "virtual printer driver" that can sit somewhere between the dialog and the actual printer driver, which manages these steps? (The Windows tool http://en.wikipedia.org/wiki/FinePrint can do something like that, but I don't need all of its features - and I need it on Mac/Linux) Thanks, Chris

    Read the article

< Previous Page | 201 202 203 204 205 206 207 208 209 210 211 212  | Next Page >